diff options
Diffstat (limited to 'arch/arm/mach-omap2')
34 files changed, 1855 insertions, 185 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index f90b225ef88..a8a3d1e23e2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -58,6 +58,10 @@ config MACH_OMAP3_BEAGLE depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB +config MACH_DEVKIT8000 + bool "DEVKIT8000 board" + depends on ARCH_OMAP3 + config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 @@ -131,7 +135,7 @@ config MACH_CM_T35 select OMAP_MUX config MACH_IGEP0020 - bool "IGEP0020" + bool "IGEP v2 board" depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d3984d34fd0..2069fb33baa 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -102,6 +102,8 @@ obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \ obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ hsmmc.o +obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \ + hsmmc.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ hsmmc.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d6f55ef9059..01d113ff9fc 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -193,6 +193,12 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init omap_2430sdp_init(void) { int ret; @@ -202,7 +208,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); omap2_hsmmc_init(mmc); - usb_musb_init(); + usb_musb_init(&musb_board_data); board_smc91x_init(); /* Turn off secondary LCD backlight */ diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5adef517a2b..f312b151375 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -46,6 +46,7 @@ #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "hsmmc.h" +#include "pm.h" #define CONFIG_DISABLE_HFCLK 1 @@ -57,6 +58,24 @@ #define TWL4030_MSECURE_GPIO 22 +/* FIXME: These values need to be updated based on more profiling on 3430sdp*/ +static struct cpuidle_params omap3_cpuidle_params_table[] = { + /* C1 */ + {1, 2, 2, 5}, + /* C2 */ + {1, 10, 10, 30}, + /* C3 */ + {1, 50, 50, 300}, + /* C4 */ + {1, 1500, 1800, 4000}, + /* C5 */ + {1, 2500, 7500, 12000}, + /* C6 */ + {1, 3000, 8500, 15000}, + /* C7 */ + {1, 10000, 30000, 300000}, +}; + static int board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -307,6 +326,7 @@ static void __init omap_3430sdp_init_irq(void) { omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); + omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); @@ -760,6 +780,12 @@ static struct flash_partitions sdp_flash_partitions[] = { }, }; +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init omap_3430sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -774,7 +800,7 @@ static void __init omap_3430sdp_init(void) ARRAY_SIZE(sdp3430_spi_board_info)); ads7846_dev_init(); omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); board_smc91x_init(); sdp_flash_init(sdp_flash_partitions); sdp3430_display_init(); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 793ce8f4e92..029c6c9b3a6 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/usb/otg.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -27,6 +28,7 @@ #include <plat/common.h> #include <plat/control.h> #include <plat/timer-gp.h> +#include <plat/usb.h> #include <asm/hardware/gic.h> static struct platform_device sdp4430_lcd_device = { @@ -73,11 +75,21 @@ static void __init omap_4430sdp_init_irq(void) omap_gpio_init(); } +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_UTMI, + .mode = MUSB_PERIPHERAL, + .power = 100, +}; static void __init omap_4430sdp_init(void) { platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); + /* OMAP4 SDP uses internal transceiver so register nop transceiver */ + usb_nop_xceiv_register(); + /* FIXME: allow multi-omap to boot until musb is updated for omap4 */ + if (!cpu_is_omap44xx()) + usb_musb_init(&musb_board_data); } static void __init omap_4430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index ad323b46477..e6b8967f5e6 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/i2c/pca953x.h> #include <mach/hardware.h> #include <mach/am35xx.h> @@ -38,6 +39,83 @@ #define LCD_PANEL_BKLIGHT_PWR 182 #define LCD_PANEL_PWM 181 +static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("s35390a", 0x30), + .type = "s35390a", + }, +}; + +/* + * RTC - S35390A + */ +#define GPIO_RTCS35390A_IRQ 55 + +static void __init am3517_evm_rtc_init(void) +{ + int r; + + omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); + r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq"); + if (r < 0) { + printk(KERN_WARNING "failed to request GPIO#%d\n", + GPIO_RTCS35390A_IRQ); + return; + } + r = gpio_direction_input(GPIO_RTCS35390A_IRQ); + if (r < 0) { + printk(KERN_WARNING "GPIO#%d cannot be configured as input\n", + GPIO_RTCS35390A_IRQ); + gpio_free(GPIO_RTCS35390A_IRQ); + return; + } + am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); +} + +/* + * I2C GPIO Expander - TCA6416 + */ + +/* Mounted on Base-Board */ +static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = { + .gpio_base = OMAP_MAX_GPIO_LINES, +}; +static struct i2c_board_info __initdata am3517evm_tca6516_info_0[] = { + { + I2C_BOARD_INFO("tca6416", 0x21), + .platform_data = &am3517evm_gpio_expander_info_0, + }, +}; + +/* Mounted on UI Card */ +static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = { + .gpio_base = OMAP_MAX_GPIO_LINES + 16, +}; +static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = { + .gpio_base = OMAP_MAX_GPIO_LINES + 32, +}; +static struct i2c_board_info __initdata am3517evm_ui_tca6516_info[] = { + { + I2C_BOARD_INFO("tca6416", 0x20), + .platform_data = &am3517evm_ui_gpio_expander_info_1, + }, + { + I2C_BOARD_INFO("tca6416", 0x21), + .platform_data = &am3517evm_ui_gpio_expander_info_2, + }, +}; + +static int __init am3517_evm_i2c_init(void) +{ + omap_register_i2c_bus(1, 400, NULL, 0); + omap_register_i2c_bus(2, 400, am3517evm_tca6516_info_0, + ARRAY_SIZE(am3517evm_tca6516_info_0)); + omap_register_i2c_bus(3, 400, am3517evm_ui_tca6516_info, + ARRAY_SIZE(am3517evm_ui_tca6516_info)); + + return 0; +} + static int lcd_enabled; static int dvi_enabled; @@ -216,6 +294,8 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init am3517_evm_init(void) { + am3517_evm_i2c_init(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); @@ -224,6 +304,12 @@ static void __init am3517_evm_init(void) usb_ehci_init(&ehci_pdata); /* DSS */ am3517_evm_display_init(); + + /* RTC - S35390A */ + am3517_evm_rtc_init(); + + i2c_register_board_info(1, am3517evm_i2c_boardinfo, + ARRAY_SIZE(am3517evm_i2c_boardinfo)); } static void __init am3517_evm_map_io(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 8659c3e2ef6..afa77caaff4 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -811,6 +811,12 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init cm_t35_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); @@ -822,7 +828,7 @@ static void __init cm_t35_init(void) cm_t35_init_led(); cm_t35_init_display(); - usb_musb_init(); + usb_musb_init(&musb_board_data); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c new file mode 100644 index 00000000000..371019054b4 --- /dev/null +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -0,0 +1,697 @@ +/* + * board-devkit8000.c - TimLL Devkit8000 + * + * Copyright (C) 2009 Kim Botherway + * Copyright (C) 2010 Thomas Weber + * + * Modified from mach-omap2/board-omap3beagle.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> +#include <plat/display.h> + +#include <plat/mcspi.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/usb/otg.h> +#include <linux/dm9000.h> +#include <linux/interrupt.h> + +#include "sdram-micron-mt46h32m32lf-6.h" + +#include "mux.h" +#include "hsmmc.h" + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define OMAP_DM9000_GPIO_IRQ 25 +#define OMAP3_DEVKIT_TS_GPIO 27 + +static struct mtd_partition devkit8000_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data devkit8000_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = devkit8000_nand_partitions, + .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +static struct resource devkit8000_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device devkit8000_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &devkit8000_nand_data, + }, + .num_resources = 1, + .resource = &devkit8000_nand_resource, +}; + +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = 29, + }, + {} /* Terminator */ +}; +static struct omap_board_config_kernel devkit8000_config[] __initdata = { +}; + +static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); + twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); + + return 0; +} + +static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) +{ +} +static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) +{ +} + +static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev) +{ + + return 0; +} + +static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev) +{ +} + + +static struct regulator_consumer_supply devkit8000_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply devkit8000_vsim_supply = { + .supply = "vmmc_aux", +}; + + +static struct omap_dss_device devkit8000_lcd_device = { + .name = "lcd", + .driver_name = "innolux_at_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = devkit8000_panel_enable_lcd, + .platform_disable = devkit8000_panel_disable_lcd, +}; +static struct omap_dss_device devkit8000_dvi_device = { + .name = "dvi", + .driver_name = "generic_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = devkit8000_panel_enable_dvi, + .platform_disable = devkit8000_panel_disable_dvi, +}; + +static struct omap_dss_device devkit8000_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .platform_enable = devkit8000_panel_enable_tv, + .platform_disable = devkit8000_panel_disable_tv, +}; + + +static struct omap_dss_device *devkit8000_dss_devices[] = { + &devkit8000_lcd_device, + &devkit8000_dvi_device, + &devkit8000_tv_device, +}; + +static struct omap_dss_board_info devkit8000_dss_data = { + .num_devices = ARRAY_SIZE(devkit8000_dss_devices), + .devices = devkit8000_dss_devices, + .default_device = &devkit8000_lcd_device, +}; + +static struct platform_device devkit8000_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &devkit8000_dss_data, + }, +}; + +static struct regulator_consumer_supply devkit8000_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &devkit8000_dss_device.dev, +}; + +static int board_keymap[] = { + KEY(0, 0, KEY_1), + KEY(1, 0, KEY_2), + KEY(2, 0, KEY_3), + KEY(0, 1, KEY_4), + KEY(1, 1, KEY_5), + KEY(2, 1, KEY_6), + KEY(3, 1, KEY_F5), + KEY(0, 2, KEY_7), + KEY(1, 2, KEY_8), + KEY(2, 2, KEY_9), + KEY(3, 2, KEY_F6), + KEY(0, 3, KEY_F7), + KEY(1, 3, KEY_0), + KEY(2, 3, KEY_F8), + PERSISTENT_KEY(4, 5), + KEY(4, 4, KEY_VOLUMEUP), + KEY(5, 5, KEY_VOLUMEDOWN), + 0 +}; + +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + +static struct twl4030_keypad_data devkit8000_kp_data = { + .keymap_data = &board_map_data, + .rows = 6, + .cols = 6, + .rep = 1, +}; + +static struct gpio_led gpio_leds[]; + +static int devkit8000_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + omap2_hsmmc_init(mmc); + + /* link regulators to MMC adapters */ + devkit8000_vmmc1_supply.dev = mmc[0].dev; + devkit8000_vsim_supply.dev = mmc[0].dev; + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + return 0; +} + +static struct twl4030_gpio_platform_data devkit8000_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = devkit8000_twl_gpio_setup, +}; + +static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = { + { + .supply = "vdvi", + .dev = &devkit8000_lcd_device.dev, + }, + { + .supply = "vdss_dsi", + .dev = &devkit8000_dss_device.dev, + } +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data devkit8000_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &devkit8000_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data devkit8000_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &devkit8000_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data devkit8000_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &devkit8000_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data devkit8000_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll2_supplies), + .consumer_supplies = devkit8000_vpll2_supplies, +}; + +static struct twl4030_usb_data devkit8000_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_codec_audio_data devkit8000_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data devkit8000_codec_data = { + .audio_mclk = 26000000, + .audio = &devkit8000_audio_data, +}; + +static struct twl4030_platform_data devkit8000_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &devkit8000_usb_data, + .gpio = &devkit8000_gpio_data, + .codec = &devkit8000_codec_data, + .vmmc1 = &devkit8000_vmmc1, + .vsim = &devkit8000_vsim, + .vdac = &devkit8000_vdac, + .vpll2 = &devkit8000_vpll2, + .keypad = &devkit8000_kp_data, +}; + +static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &devkit8000_twldata, + }, +}; + +static int __init devkit8000_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo, + ARRAY_SIZE(devkit8000_i2c_boardinfo)); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct gpio_led gpio_leds[] = { + { + .name = "led1", + .default_trigger = "heartbeat", + .gpio = 186, + .active_low = true, + }, + { + .name = "led2", + .default_trigger = "mmc0", + .gpio = 163, + .active_low = true, + }, + { + .name = "ledB", + .default_trigger = "none", + .gpio = 153, + .active_low = true, + }, + { + .name = "led3", + .default_trigger = "none", + .gpio = 164, + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 26, + .desc = "user", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + + +static void __init devkit8000_init_irq(void) +{ + omap_board_config = devkit8000_config; + omap_board_config_size = ARRAY_SIZE(devkit8000_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + +static void __init devkit8000_ads7846_init(void) +{ + int gpio = OMAP3_DEVKIT_TS_GPIO; + int ret; + + ret = gpio_request(gpio, "ads7846_pen_down"); + if (ret < 0) { + printk(KERN_ERR "Failed to request GPIO %d for " + "ads7846 pen down IRQ\n", gpio); + return; + } + + gpio_direction_input(gpio); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO); +} + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 5, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .settle_delay_usecs = 150, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info devkit8000_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 2, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO), + .platform_data = &ads7846_config, + } +}; + +#define OMAP_DM9000_BASE 0x2c000000 + +static struct resource omap_dm9000_resources[] = { + [0] = { + .start = OMAP_DM9000_BASE, + .end = (OMAP_DM9000_BASE + 0x4 - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (OMAP_DM9000_BASE + 0x400), + .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1), + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct dm9000_plat_data omap_dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device omap_dm9000_dev = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(omap_dm9000_resources), + .resource = omap_dm9000_resources, + .dev = { + .platform_data = &omap_dm9000_platdata, + }, +}; + +static void __init omap_dm9000_init(void) +{ + if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", + OMAP_DM9000_GPIO_IRQ); + return; + } + + gpio_direction_input(OMAP_DM9000_GPIO_IRQ); +} + +static struct platform_device *devkit8000_devices[] __initdata = { + &devkit8000_dss_device, + &leds_gpio, + &keys_gpio, + &omap_dm9000_dev, +}; + +static void __init devkit8000_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + devkit8000_nand_data.cs = nandcs; + devkit8000_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + devkit8000_nand_data.gpmc_baseaddr = (void *) + (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&devkit8000_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + +static void __init devkit8000_init(void) +{ + devkit8000_i2c_init(); + platform_add_devices(devkit8000_devices, + ARRAY_SIZE(devkit8000_devices)); + omap_board_config = devkit8000_config; + omap_board_config_size = ARRAY_SIZE(devkit8000_config); + + spi_register_board_info(devkit8000_spi_board_info, + ARRAY_SIZE(devkit8000_spi_board_info)); + + omap_serial_init(); + + omap_dm9000_init(); + + devkit8000_ads7846_init(); + + omap_mux_init_gpio(170, OMAP_PIN_INPUT); + + gpio_request(170, "DVI_nPD"); + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(170, true); + + usb_musb_init(&musb_board_data); + usb_ehci_init(&ehci_pdata); + devkit8000_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); +} + +static void __init devkit8000_map_io(void) +{ + omap2_set_globals_343x(); + omap34xx_map_common_io(); +} + +MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = devkit8000_map_io, + .init_irq = devkit8000_init_irq, + .init_machine = devkit8000_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index adc1b46fa04..9958987a3d0 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -16,6 +16,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/interrupt.h> #include <linux/regulator/machine.h> @@ -28,9 +29,12 @@ #include <plat/common.h> #include <plat/gpmc.h> #include <plat/usb.h> +#include <plat/display.h> +#include <plat/onenand.h> #include "mux.h" #include "hsmmc.h" +#include "sdram-numonyx-m65kxxxxam.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -38,6 +42,108 @@ #define IGEP2_GPIO_LED0_RED 26 #define IGEP2_GPIO_LED0_GREEN 27 #define IGEP2_GPIO_LED1_RED 28 +#define IGEP2_GPIO_DVI_PUP 170 +#define IGEP2_GPIO_WIFI_NPD 94 +#define IGEP2_GPIO_WIFI_NRESET 95 + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +#define ONENAND_MAP 0x20000000 + +/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY ) + * Since the device is equipped with two DataRAMs, and two-plane NAND + * Flash memory array, these two component enables simultaneous program + * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 + * while Plane2 has only odd blocks such as block1, block3, block5. + * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) + */ + +static struct mtd_partition igep2_onenand_partitions[] = { + { + .name = "X-Loader", + .offset = 0, + .size = 2 * (64*(2*2048)) + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 6 * (64*(2*2048)), + }, + { + .name = "Environment", + .offset = MTDPART_OFS_APPEND, + .size = 2 * (64*(2*2048)), + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 12 * (64*(2*2048)), + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static int igep2_onenand_setup(void __iomem *onenand_base, int freq) +{ + /* nothing is required to be setup for onenand as of now */ + return 0; +} + +static struct omap_onenand_platform_data igep2_onenand_data = { + .parts = igep2_onenand_partitions, + .nr_parts = ARRAY_SIZE(igep2_onenand_partitions), + .onenand_setup = igep2_onenand_setup, + .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ +}; + +static struct platform_device igep2_onenand_device = { + .name = "omap2-onenand", + .id = -1, + .dev = { + .platform_data = &igep2_onenand_data, + }, +}; + +void __init igep2_flash_init(void) +{ + u8 cs = 0; + u8 onenandcs = GPMC_CS_NUM + 1; + + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* Check if NAND/oneNAND is configured */ + if ((ret & 0xC00) == 0x800) + /* NAND found */ + pr_err("IGEP v2: Unsupported NAND found\n"); + else { + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + if ((ret & 0x3F) == (ONENAND_MAP >> 24)) + /* ONENAND found */ + onenandcs = cs; + } + cs++; + } + if (onenandcs > GPMC_CS_NUM) { + pr_err("IGEP v2: Unable to find configuration in GPMC\n"); + return; + } + + if (onenandcs < GPMC_CS_NUM) { + igep2_onenand_data.cs = onenandcs; + if (platform_device_register(&igep2_onenand_device) < 0) + pr_err("IGEP v2: Unable to register OneNAND device\n"); + } +} + +#else +void __init igep2_flash_init(void) {} +#endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) @@ -106,6 +212,10 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = { .supply = "vmmc", }; +static struct regulator_consumer_supply igep2_vmmc2_supply = { + .supply = "vmmc", +}; + /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep2_vmmc1 = { .constraints = { @@ -121,6 +231,21 @@ static struct regulator_init_data igep2_vmmc1 = { .consumer_supplies = &igep2_vmmc1_supply, }; +/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */ +static struct regulator_init_data igep2_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep2_vmmc2_supply, +}; + static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -148,6 +273,7 @@ static int igep2_twl_gpio_setup(struct device *dev, * regulators will be set up only *after* we return. */ igep2_vmmc1_supply.dev = mmc[0].dev; + igep2_vmmc2_supply.dev = mmc[1].dev; return 0; }; @@ -164,23 +290,130 @@ static struct twl4030_usb_data igep2_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; +static int igep2_enable_dvi(struct omap_dss_device *dssdev) +{ + gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); + + return 0; +} + +static void igep2_disable_dvi(struct omap_dss_device *dssdev) +{ + gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); +} + +static struct omap_dss_device igep2_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_panel", + .phy.dpi.data_lines = 24, + .platform_enable = igep2_enable_dvi, + .platform_disable = igep2_disable_dvi, +}; + +static struct omap_dss_device *igep2_dss_devices[] = { + &igep2_dvi_device +}; + +static struct omap_dss_board_info igep2_dss_data = { + .num_devices = ARRAY_SIZE(igep2_dss_devices), + .devices = igep2_dss_devices, + .default_device = &igep2_dvi_device, +}; + +static struct platform_device igep2_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &igep2_dss_data, + }, +}; + +static struct regulator_consumer_supply igep2_vpll2_supply = { + .supply = "vdds_dsi", + .dev = &igep2_dss_device.dev, +}; + +static struct regulator_init_data igep2_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep2_vpll2_supply, +}; + +static void __init igep2_display_init(void) +{ + if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") && + gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1)) + pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); +} +#ifdef CONFIG_LEDS_TRIGGERS +static struct gpio_led gpio_leds[] = { + { + .name = "GPIO_LED1_RED", + .default_trigger = "heartbeat", + .gpio = IGEP2_GPIO_LED1_RED, + }, +}; + +static struct gpio_led_platform_data gpio_leds_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_leds_info, + }, +}; +#endif + +static struct platform_device *igep2_devices[] __initdata = { + &igep2_dss_device, +#ifdef CONFIG_LEDS_TRIGGERS + &leds_gpio, +#endif +}; + static void __init igep2_init_irq(void) { omap_board_config = igep2_config; omap_board_config_size = ARRAY_SIZE(igep2_config); - omap2_init_common_hw(NULL, NULL); + omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); omap_init_irq(); omap_gpio_init(); } +static struct twl4030_codec_audio_data igep2_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data igep2_codec_data = { + .audio_mclk = 26000000, + .audio = &igep2_audio_data, +}; + static struct twl4030_platform_data igep2_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .usb = &igep2_usb_data, + .codec = &igep2_codec_data, .gpio = &igep2_gpio_data, .vmmc1 = &igep2_vmmc1, + .vmmc2 = &igep2_vmmc2, + .vpll2 = &igep2_vpll2, }; @@ -203,6 +436,23 @@ static int __init igep2_i2c_init(void) return 0; } +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL, +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -215,9 +465,13 @@ static void __init igep2_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); + platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); + usb_ehci_init(&ehci_pdata); + igep2_flash_init(); + igep2_display_init(); igep2_init_smsc911x(); /* GPIO userspace leds */ @@ -234,13 +488,30 @@ static void __init igep2_init(void) gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0); } else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); - +#ifndef CONFIG_LEDS_TRIGGERS if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) && (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) { gpio_export(IGEP2_GPIO_LED1_RED, 0); gpio_set_value(IGEP2_GPIO_LED1_RED, 0); } else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); +#endif + /* GPIO W-LAN + Bluetooth combo module */ + if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && + (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) { + gpio_export(IGEP2_GPIO_WIFI_NPD, 0); +/* gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */ + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n"); + + if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && + (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) { + gpio_export(IGEP2_GPIO_WIFI_NRESET, 0); + gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0); + udelay(10); + gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n"); } static void __init igep2_map_io(void) diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 095adcb642b..5fcb52e7129 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -383,6 +383,12 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init omap_ldp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -394,7 +400,7 @@ static void __init omap_ldp_init(void) ARRAY_SIZE(ldp_spi_board_info)); ads7846_dev_init(); omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); omap2_hsmmc_init(mmc); /* link regulators to MMC adapters */ diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 1bae6991337..6eb77e1f7c8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -430,6 +430,12 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init omap3_beagle_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -443,7 +449,7 @@ static void __init omap3_beagle_init(void) /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); - usb_musb_init(); + usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); omap3beagle_flash_init(); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 45227f39475..d6bc88c426b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -448,20 +448,23 @@ static struct twl4030_usb_data omap3evm_usb_data = { static int board_keymap[] = { KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_RIGHT), - KEY(0, 2, KEY_A), - KEY(0, 3, KEY_B), - KEY(1, 0, KEY_DOWN), + KEY(0, 1, KEY_DOWN), + KEY(0, 2, KEY_ENTER), + KEY(0, 3, KEY_M), + + KEY(1, 0, KEY_RIGHT), KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_E), - KEY(1, 3, KEY_F), - KEY(2, 0, KEY_ENTER), - KEY(2, 1, KEY_I), + KEY(1, 2, KEY_I), + KEY(1, 3, KEY_N), + + KEY(2, 0, KEY_A), + KEY(2, 1, KEY_E), KEY(2, 2, KEY_J), - KEY(2, 3, KEY_K), - KEY(3, 0, KEY_M), - KEY(3, 1, KEY_N), - KEY(3, 2, KEY_O), + KEY(2, 3, KEY_O), + + KEY(3, 0, KEY_B), + KEY(3, 1, KEY_F), + KEY(3, 2, KEY_K), KEY(3, 3, KEY_P) }; @@ -647,12 +650,24 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | + OMAP_PIN_OFF_WAKEUPENABLE), + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | + OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else #define board_mux NULL #endif +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -666,10 +681,10 @@ static void __init omap3_evm_init(void) ARRAY_SIZE(omap3evm_spi_board_info)); omap_serial_init(); -#ifdef CONFIG_NOP_USB_XCEIV + /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ usb_nop_xceiv_register(); -#endif + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); @@ -692,7 +707,7 @@ static void __init omap3_evm_init(void) omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); ehci_pdata.reset_gpio_port[1] = 135; } - usb_musb_init(); + usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); ads7846_dev_init(); omap3evm_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 9967b5d24b5..4827f4658df 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,6 +40,7 @@ #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> +#include <plat/display.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -192,6 +193,40 @@ static struct twl4030_keypad_data pandora_kp_data = { .rep = 1, }; +static struct omap_dss_device pandora_lcd_device = { + .name = "lcd", + .driver_name = "tpo_td043mtea1_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .reset_gpio = 157, +}; + +static struct omap_dss_device pandora_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +static struct omap_dss_device *pandora_dss_devices[] = { + &pandora_lcd_device, + &pandora_tv_device, +}; + +static struct omap_dss_board_info pandora_dss_data = { + .num_devices = ARRAY_SIZE(pandora_dss_devices), + .devices = pandora_dss_devices, + .default_device = &pandora_lcd_device, +}; + +static struct platform_device pandora_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &pandora_dss_data, + }, +}; + static struct omap2_hsmmc_info omap3pandora_mmc[] = { { .mmc = 1, @@ -217,14 +252,6 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply pandora_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply pandora_vmmc2_supply = { - .supply = "vmmc", -}; - static int omap3pandora_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -233,10 +260,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, omap3pandora_mmc[1].gpio_cd = gpio + 1; omap2_hsmmc_init(omap3pandora_mmc); - /* link regulators to MMC adapters */ - pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev; - pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev; - return 0; } @@ -247,6 +270,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .setup = omap3pandora_twl_gpio_setup, }; +static struct regulator_consumer_supply pandora_vmmc1_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); + +static struct regulator_consumer_supply pandora_vmmc2_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + +static struct regulator_consumer_supply pandora_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); + +static struct regulator_consumer_supply pandora_vdds_supplies[] = { + REGULATOR_SUPPLY("vdds_sdi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), +}; + +static struct regulator_consumer_supply pandora_vcc_lcd_supply = + REGULATOR_SUPPLY("vcc", "display0"); + +static struct regulator_consumer_supply pandora_usb_phy_supply = + REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"); + +/* ads7846 on SPI and 2 nub controllers on I2C */ +static struct regulator_consumer_supply pandora_vaux4_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), + REGULATOR_SUPPLY("vcc", "3-0066"), + REGULATOR_SUPPLY("vcc", "3-0067"), +}; + +static struct regulator_consumer_supply pandora_adac_supply = + REGULATOR_SUPPLY("vcc", "soc-audio"); + /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data pandora_vmmc1 = { .constraints = { @@ -277,6 +330,96 @@ static struct regulator_init_data pandora_vmmc2 = { .consumer_supplies = &pandora_vmmc2_supply, }; +/* VDAC for DSS driving S-Video */ +static struct regulator_init_data pandora_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data pandora_vpll2 = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies), + .consumer_supplies = pandora_vdds_supplies, +}; + +/* VAUX1 for LCD */ +static struct regulator_init_data pandora_vaux1 = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vcc_lcd_supply, +}; + +/* VAUX2 for USB host PHY */ +static struct regulator_init_data pandora_vaux2 = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_usb_phy_supply, +}; + +/* VAUX4 for ads7846 and nubs */ +static struct regulator_init_data pandora_vaux4 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(pandora_vaux4_supplies), + .consumer_supplies = pandora_vaux4_supplies, +}; + +/* VSIM for audio DAC */ +static struct regulator_init_data pandora_vsim = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_adac_supply, +}; + static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -298,6 +441,12 @@ static struct twl4030_platform_data omap3pandora_twldata = { .codec = &omap3pandora_codec_data, .vmmc1 = &pandora_vmmc1, .vmmc2 = &pandora_vmmc2, + .vdac = &pandora_vdac, + .vpll2 = &pandora_vpll2, + .vaux1 = &pandora_vaux1, + .vaux2 = &pandora_vaux2, + .vaux4 = &pandora_vaux4, + .vsim = &pandora_vsim, .keypad = &pandora_kp_data, }; @@ -365,6 +514,12 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { .controller_data = &ads7846_mcspi_config, .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO), .platform_data = &ads7846_config, + }, { + .modalias = "tpo_td043mtea1_panel_spi", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 375000, + .platform_data = &pandora_lcd_device, } }; @@ -379,6 +534,7 @@ static void __init omap3pandora_init_irq(void) static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, + &pandora_dss_device, }; static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -401,6 +557,12 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -413,7 +575,7 @@ static void __init omap3pandora_init(void) omap3pandora_ads7846_init(); usb_ehci_init(&ehci_pdata); pandora_keys_gpio_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 8252ba49a66..3943d0f8322 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -527,6 +527,12 @@ static void __init early_touchbook_revision(char **p) } __early_param("tbr=", early_touchbook_revision); +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init omap3_touchbook_init(void) { pm_power_off = omap3_touchbook_poweroff; @@ -545,7 +551,7 @@ static void __init omap3_touchbook_init(void) spi_register_board_info(omap3_ads7846_spi_board_info, ARRAY_SIZE(omap3_ads7846_spi_board_info)); omap3_ads7846_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); omap3touchbook_flash_init(); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 7e6aa829274..50872a42bec 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -413,6 +413,12 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -420,7 +426,7 @@ static void __init overo_init(void) platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); overo_flash_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); overo_ads7846_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 6a49f916103..b155c366c65 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -16,6 +16,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -30,9 +31,49 @@ #include <plat/usb.h> #include "mux.h" +#include "pm.h" + +#define RX51_GPIO_SLEEP_IND 162 struct omap_sdrc_params *rx51_get_sdram_timings(void); +static struct gpio_led gpio_leds[] = { + { + .name = "sleep_ind", + .gpio = RX51_GPIO_SLEEP_IND, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct cpuidle_params rx51_cpuidle_params[] = { + /* C1 */ + {1, 110, 162, 5}, + /* C2 */ + {1, 106, 180, 309}, + /* C3 */ + {0, 107, 410, 46057}, + /* C4 */ + {0, 121, 3374, 46057}, + /* C5 */ + {1, 855, 1146, 46057}, + /* C6 */ + {0, 7580, 4134, 484329}, + /* C7 */ + {1, 7505, 15274, 484329}, +}; + static struct omap_lcd_config rx51_lcd_config = { .ctrl_name = "internal", }; @@ -62,6 +103,7 @@ static void __init rx51_init_irq(void) omap_board_config = rx51_config; omap_board_config_size = ARRAY_SIZE(rx51_config); + omap3_pm_init_cpuidle(rx51_cpuidle_params); sdrc_params = rx51_get_sdram_timings(); omap2_init_common_hw(sdrc_params, sdrc_params); omap_init_irq(); @@ -78,16 +120,24 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_PERIPHERAL, + .power = 0, +}; + static void __init rx51_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); rx51_peripherals_init(); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); + + platform_device_register(&leds_gpio); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 9a0821fb7ea..ca95d8d6413 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -264,6 +264,12 @@ static int __init omap_i2c_init(void) return 0; } +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + static void enable_board_wakeup_source(void) { /* T2 interrupt line (keypad) */ @@ -275,6 +281,6 @@ void __init zoom_peripherals_init(void) { omap_i2c_init(); omap_serial_init(); - usb_musb_init(); + usb_musb_init(&musb_board_data); enable_board_wakeup_source(); } diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 5e208942ca7..d3e3cd5170d 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -20,6 +20,7 @@ #include <plat/common.h> #include <plat/board.h> +#include <plat/usb.h> #include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" @@ -51,11 +52,24 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 64, + .reset_gpio_port[2] = -EINVAL, +}; + static void __init omap_zoom_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); zoom_debugboard_init(); + + omap_mux_init_gpio(64, OMAP_PIN_OUTPUT); + usb_ehci_init(&ehci_pdata); } MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index cdd1f35636d..43f8a33655d 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -140,7 +140,11 @@ static struct omap3_control_regs control_context; void __init omap2_set_globals_control(struct omap_globals *omap2_globals) { - omap2_ctrl_base = omap2_globals->ctrl; + /* Static mapping, never released */ + if (omap2_globals->ctrl) { + omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K); + WARN_ON(!omap2_ctrl_base); + } } void __iomem *omap_ctrl_base_get(void) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 12f0cbfc289..3d3d035db9a 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -45,6 +45,8 @@ #define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */ #define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */ +#define OMAP3_STATE_MAX OMAP3_STATE_C7 + struct omap3_processor_cx { u8 valid; u8 type; @@ -60,6 +62,30 @@ struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; struct omap3_processor_cx current_cx_state; struct powerdomain *mpu_pd, *core_pd; +/* + * The latencies/thresholds for various C states have + * to be configured from the respective board files. + * These are some default values (which might not provide + * the best power savings) used on boards which do not + * pass these details from the board file. + */ +static struct cpuidle_params cpuidle_params_table[] = { + /* C1 */ + {1, 2, 2, 5}, + /* C2 */ + {1, 10, 10, 30}, + /* C3 */ + {1, 50, 50, 300}, + /* C4 */ + {1, 1500, 1800, 4000}, + /* C5 */ + {1, 2500, 7500, 12000}, + /* C6 */ + {1, 3000, 8500, 15000}, + /* C7 */ + {1, 10000, 30000, 300000}, +}; + static int omap3_idle_bm_check(void) { if (!omap3_can_sleep()) @@ -104,13 +130,6 @@ static int omap3_enter_idle(struct cpuidle_device *dev, local_irq_disable(); local_fiq_disable(); - if (!enable_off_mode) { - if (mpu_state < PWRDM_POWER_RET) - mpu_state = PWRDM_POWER_RET; - if (core_state < PWRDM_POWER_RET) - core_state = PWRDM_POWER_RET; - } - pwrdm_set_next_pwrst(mpu_pd, mpu_state); pwrdm_set_next_pwrst(core_pd, core_state); @@ -141,6 +160,67 @@ return_sleep_time: } /** + * next_valid_state - Find next valid c-state + * @dev: cpuidle device + * @state: Currently selected c-state + * + * If the current state is valid, it is returned back to the caller. + * Else, this function searches for a lower c-state which is still + * valid (as defined in omap3_power_states[]). + */ +static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, + struct cpuidle_state *curr) +{ + struct cpuidle_state *next = NULL; + struct omap3_processor_cx *cx; + + cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr); + + /* Check if current state is valid */ + if (cx->valid) { + return curr; + } else { + u8 idx = OMAP3_STATE_MAX; + + /* + * Reach the current state starting at highest C-state + */ + for (; idx >= OMAP3_STATE_C1; idx--) { + if (&dev->states[idx] == curr) { + next = &dev->states[idx]; + break; + } + } + + /* + * Should never hit this condition. + */ + WARN_ON(next == NULL); + + /* + * Drop to next valid state. + * Start search from the next (lower) state. + */ + idx--; + for (; idx >= OMAP3_STATE_C1; idx--) { + struct omap3_processor_cx *cx; + + cx = cpuidle_get_statedata(&dev->states[idx]); + if (cx->valid) { + next = &dev->states[idx]; + break; + } + } + /* + * C1 and C2 are always valid. + * So, no need to check for 'next==NULL' outside this loop. + */ + } + + return next; +} + +/** * omap3_enter_idle_bm - Checks for any bus activity * @dev: cpuidle device * @state: The target state to be programmed @@ -152,7 +232,7 @@ return_sleep_time: static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct cpuidle_state *new_state = state; + struct cpuidle_state *new_state = next_valid_state(dev, state); if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { BUG_ON(!dev->safe_state); @@ -165,6 +245,50 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); +/** + * omap3_cpuidle_update_states - Update the cpuidle states. + * + * Currently, this function toggles the validity of idle states based upon + * the flag 'enable_off_mode'. When the flag is set all states are valid. + * Else, states leading to OFF state set to be invalid. + */ +void omap3_cpuidle_update_states(void) +{ + int i; + + for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { + struct omap3_processor_cx *cx = &omap3_power_states[i]; + + if (enable_off_mode) { + cx->valid = 1; + } else { + if ((cx->mpu_state == PWRDM_POWER_OFF) || + (cx->core_state == PWRDM_POWER_OFF)) + cx->valid = 0; + } + } +} + +void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) +{ + int i; + + if (!cpuidle_board_params) + return; + + for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { + cpuidle_params_table[i].valid = + cpuidle_board_params[i].valid; + cpuidle_params_table[i].sleep_latency = + cpuidle_board_params[i].sleep_latency; + cpuidle_params_table[i].wake_latency = + cpuidle_board_params[i].wake_latency; + cpuidle_params_table[i].threshold = + cpuidle_board_params[i].threshold; + } + return; +} + /* omap3_init_power_states - Initialises the OMAP3 specific C states. * * Below is the desciption of each C state. @@ -179,75 +303,103 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); void omap_init_power_states(void) { /* C1 . MPU WFI + Core active */ - omap3_power_states[OMAP3_STATE_C1].valid = 1; + omap3_power_states[OMAP3_STATE_C1].valid = + cpuidle_params_table[OMAP3_STATE_C1].valid; omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; - omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2; - omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2; - omap3_power_states[OMAP3_STATE_C1].threshold = 5; + omap3_power_states[OMAP3_STATE_C1].sleep_latency = + cpuidle_params_table[OMAP3_STATE_C1].sleep_latency; + omap3_power_states[OMAP3_STATE_C1].wakeup_latency = + cpuidle_params_table[OMAP3_STATE_C1].wake_latency; + omap3_power_states[OMAP3_STATE_C1].threshold = + cpuidle_params_table[OMAP3_STATE_C1].threshold; omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; /* C2 . MPU WFI + Core inactive */ - omap3_power_states[OMAP3_STATE_C2].valid = 1; + omap3_power_states[OMAP3_STATE_C2].valid = + cpuidle_params_table[OMAP3_STATE_C2].valid; omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; - omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10; - omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10; - omap3_power_states[OMAP3_STATE_C2].threshold = 30; + omap3_power_states[OMAP3_STATE_C2].sleep_latency = + cpuidle_params_table[OMAP3_STATE_C2].sleep_latency; + omap3_power_states[OMAP3_STATE_C2].wakeup_latency = + cpuidle_params_table[OMAP3_STATE_C2].wake_latency; + omap3_power_states[OMAP3_STATE_C2].threshold = + cpuidle_params_table[OMAP3_STATE_C2].threshold; omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; /* C3 . MPU CSWR + Core inactive */ - omap3_power_states[OMAP3_STATE_C3].valid = 1; + omap3_power_states[OMAP3_STATE_C3].valid = + cpuidle_params_table[OMAP3_STATE_C3].valid; omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; - omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50; - omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50; - omap3_power_states[OMAP3_STATE_C3].threshold = 300; + omap3_power_states[OMAP3_STATE_C3].sleep_latency = + cpuidle_params_table[OMAP3_STATE_C3].sleep_latency; + omap3_power_states[OMAP3_STATE_C3].wakeup_latency = + cpuidle_params_table[OMAP3_STATE_C3].wake_latency; + omap3_power_states[OMAP3_STATE_C3].threshold = + cpuidle_params_table[OMAP3_STATE_C3].threshold; omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; /* C4 . MPU OFF + Core inactive */ - omap3_power_states[OMAP3_STATE_C4].valid = 1; + omap3_power_states[OMAP3_STATE_C4].valid = + cpuidle_params_table[OMAP3_STATE_C4].valid; omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; - omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500; - omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800; - omap3_power_states[OMAP3_STATE_C4].threshold = 4000; + omap3_power_states[OMAP3_STATE_C4].sleep_latency = + cpuidle_params_table[OMAP3_STATE_C4].sleep_latency; + omap3_power_states[OMAP3_STATE_C4].wakeup_latency = + cpuidle_params_table[OMAP3_STATE_C4].wake_latency; + omap3_power_states[OMAP3_STATE_C4].threshold = + cpuidle_params_table[OMAP3_STATE_C4].threshold; omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; /* C5 . MPU CSWR + Core CSWR*/ - omap3_power_states[OMAP3_STATE_C5].valid = 1; + omap3_power_states[OMAP3_STATE_C5].valid = + cpuidle_params_table[OMAP3_STATE_C5].valid; omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; - omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500; - omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500; - omap3_power_states[OMAP3_STATE_C5].threshold = 12000; + omap3_power_states[OMAP3_STATE_C5].sleep_latency = + cpuidle_params_table[OMAP3_STATE_C5].sleep_latency; + omap3_power_states[OMAP3_STATE_C5].wakeup_latency = + cpuidle_params_table[OMAP3_STATE_C5].wake_latency; + omap3_power_states[OMAP3_STATE_C5].threshold = + cpuidle_params_table[OMAP3_STATE_C5].threshold; omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; /* C6 . MPU OFF + Core CSWR */ - omap3_power_states[OMAP3_STATE_C6].valid = 1; + omap3_power_states[OMAP3_STATE_C6].valid = + cpuidle_params_table[OMAP3_STATE_C6].valid; omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; - omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000; - omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500; - omap3_power_states[OMAP3_STATE_C6].threshold = 15000; + omap3_power_states[OMAP3_STATE_C6].sleep_latency = + cpuidle_params_table[OMAP3_STATE_C6].sleep_latency; + omap3_power_states[OMAP3_STATE_C6].wakeup_latency = + cpuidle_params_table[OMAP3_STATE_C6].wake_latency; + omap3_power_states[OMAP3_STATE_C6].threshold = + cpuidle_params_table[OMAP3_STATE_C6].threshold; omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; /* C7 . MPU OFF + Core OFF */ - omap3_power_states[OMAP3_STATE_C7].valid = 1; + omap3_power_states[OMAP3_STATE_C7].valid = + cpuidle_params_table[OMAP3_STATE_C7].valid; omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; - omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000; - omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000; - omap3_power_states[OMAP3_STATE_C7].threshold = 300000; + omap3_power_states[OMAP3_STATE_C7].sleep_latency = + cpuidle_params_table[OMAP3_STATE_C7].sleep_latency; + omap3_power_states[OMAP3_STATE_C7].wakeup_latency = + cpuidle_params_table[OMAP3_STATE_C7].wake_latency; + omap3_power_states[OMAP3_STATE_C7].threshold = + cpuidle_params_table[OMAP3_STATE_C7].threshold; omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | @@ -302,6 +454,8 @@ int __init omap3_idle_init(void) return -EINVAL; dev->state_count = count; + omap3_cpuidle_update_states(); + if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c104d5ca65b..23e4d773361 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -191,7 +191,7 @@ static struct resource omap4_mbox_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = INT_44XX_MAIL_U0_MPU, + .start = OMAP44XX_IRQ_MAIL_U0, .flags = IORESOURCE_IRQ, }, }; @@ -720,13 +720,13 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, if (!cpu_is_omap44xx()) return; base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET; - irq = INT_44XX_MMC4_IRQ; + irq = OMAP44XX_IRQ_MMC4; break; case 4: if (!cpu_is_omap44xx()) return; base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET; - irq = INT_44XX_MMC5_IRQ; + irq = OMAP44XX_IRQ_MMC4; break; default: continue; @@ -738,7 +738,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, } else if (cpu_is_omap44xx()) { if (i < 3) { base += OMAP4_MMC_REG_OFFSET; - irq += IRQ_GIC_START; + irq += OMAP44XX_IRQ_GIC_START; } size = OMAP4_HSMMC_SIZE; name = "mmci-omap-hs"; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d2897a6fe49..37b8a1a4adf 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -57,6 +57,8 @@ int omap_type(void) val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); + } else if (cpu_is_omap44xx()) { + val = omap_ctrl_readl(OMAP44XX_CONTROL_STATUS); } else { pr_err("Cannot detect omap type!\n"); goto out; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 303d5c2c6fb..402e8f0d0f2 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -137,12 +137,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .type = MT_DEVICE }, { - .virtual = L4_WK_34XX_VIRT, - .pfn = __phys_to_pfn(L4_WK_34XX_PHYS), - .length = L4_WK_34XX_SIZE, - .type = MT_DEVICE - }, - { .virtual = OMAP34XX_GPMC_VIRT, .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS), .length = OMAP34XX_GPMC_SIZE, @@ -189,12 +183,6 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .type = MT_DEVICE, }, { - .virtual = L4_WK_44XX_VIRT, - .pfn = __phys_to_pfn(L4_WK_44XX_PHYS), - .length = L4_WK_44XX_SIZE, - .type = MT_DEVICE, - }, - { .virtual = OMAP44XX_GPMC_VIRT, .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS), .length = OMAP44XX_GPMC_SIZE, diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 2c9fd1c2a7c..52a981cb8fd 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -40,6 +40,9 @@ #define AUTOIDLE (1 << 0) #define SOFTRESET (1 << 1) #define SMARTIDLE (2 << 3) +#define OMAP4_SOFTRESET (1 << 0) +#define OMAP4_NOIDLE (1 << 2) +#define OMAP4_SMARTIDLE (2 << 2) /* SYSSTATUS: register bit definition */ #define RESETDONE (1 << 0) @@ -99,23 +102,41 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) } clk_enable(mbox_ick_handle); - mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG); - timeout = jiffies + msecs_to_jiffies(20); - do { - l = mbox_read_reg(MAILBOX_SYSSTATUS); - if (l & RESETDONE) - break; - } while (!time_after(jiffies, timeout)); - - if (!(l & RESETDONE)) { - pr_err("Can't take mmu out of reset\n"); - return -ENODEV; + if (cpu_is_omap44xx()) { + mbox_write_reg(OMAP4_SOFTRESET, MAILBOX_SYSCONFIG); + timeout = jiffies + msecs_to_jiffies(20); + do { + l = mbox_read_reg(MAILBOX_SYSCONFIG); + if (!(l & OMAP4_SOFTRESET)) + break; + } while (!time_after(jiffies, timeout)); + + if (l & OMAP4_SOFTRESET) { + pr_err("Can't take mailbox out of reset\n"); + return -ENODEV; + } + } else { + mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG); + timeout = jiffies + msecs_to_jiffies(20); + do { + l = mbox_read_reg(MAILBOX_SYSSTATUS); + if (l & RESETDONE) + break; + } while (!time_after(jiffies, timeout)); + + if (!(l & RESETDONE)) { + pr_err("Can't take mailbox out of reset\n"); + return -ENODEV; + } } l = mbox_read_reg(MAILBOX_REVISION); pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - l = SMARTIDLE | AUTOIDLE; + if (cpu_is_omap44xx()) + l = OMAP4_SMARTIDLE; + else + l = SMARTIDLE | AUTOIDLE; mbox_write_reg(l, MAILBOX_SYSCONFIG); omap2_mbox_enable_irq(mbox, IRQ_RX); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index d601f9405d1..be8fce395a5 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -136,6 +136,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { }, { .phys_base = OMAP34XX_MCBSP2_BASE, + .phys_base_st = OMAP34XX_MCBSP2_ST_BASE, .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, @@ -145,6 +146,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { }, { .phys_base = OMAP34XX_MCBSP3_BASE, + .phys_base_st = OMAP34XX_MCBSP3_ST_BASE, .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, .rx_irq = INT_24XX_MCBSP3_IRQ_RX, diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 7a9c2d00451..bd6466a2b03 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -23,6 +23,22 @@ extern int omap3_can_sleep(void); extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap3_idle_init(void); +struct cpuidle_params { + u8 valid; + u32 sleep_latency; + u32 wake_latency; + u32 threshold; +}; + +#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE) +extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params); +#else +static +inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) +{ +} +#endif + extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); @@ -37,6 +53,10 @@ extern int omap2_pm_debug; #define omap2_pm_debug 0 #endif +#if defined(CONFIG_CPU_IDLE) +extern void omap3_cpuidle_update_states(void); +#endif + #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); extern int pm_dbg_regset_save(int reg_set); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 62e27aaf9fd..fee2efb172e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -941,6 +941,10 @@ void omap3_pm_off_mode_enable(int enable) else state = PWRDM_POWER_RET; +#ifdef CONFIG_CPU_IDLE + omap3_cpuidle_update_states(); +#endif + list_for_each_entry(pwrst, &pwrst_list, node) { pwrst->next_state = state; set_pwrdm_state(pwrst->pwrdm, state); diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 356a02010aa..81872aacb80 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -277,9 +277,19 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { - prm_base = omap2_globals->prm; - cm_base = omap2_globals->cm; - cm2_base = omap2_globals->cm2; + /* Static mapping, never released */ + if (omap2_globals->prm) { + prm_base = ioremap(omap2_globals->prm, SZ_8K); + WARN_ON(!prm_base); + } + if (omap2_globals->cm) { + cm_base = ioremap(omap2_globals->cm, SZ_8K); + WARN_ON(!cm_base); + } + if (omap2_globals->cm2) { + cm2_base = ioremap(omap2_globals->cm2, SZ_8K); + WARN_ON(!cm2_base); + } } #ifdef CONFIG_ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h new file mode 100644 index 00000000000..cd435291702 --- /dev/null +++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h @@ -0,0 +1,51 @@ +/* + * SDRC register values for the Numonyx M65KXXXXAM + * + * Copyright (C) 2009 Integration Software and Electronic Engineering. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM +#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM + +#include <plat/sdrc.h> + +/* Numonyx M65KXXXXAM */ +static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = { + [0] = { + .rate = 200000000, + .actim_ctrla = 0xe321d4c6, + .actim_ctrlb = 0x00022328, + .rfr_ctrl = 0x0005e601, + .mr = 0x00000032, + }, + [1] = { + .rate = 166000000, + .actim_ctrla = 0xba9dc485, + .actim_ctrlb = 0x00022321, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 133000000, + .actim_ctrla = 0x9a19b485, + .actim_ctrlb = 0x0002231b, + .rfr_ctrl = 0x0003de01, + .mr = 0x00000032, + }, + [3] = { + .rate = 83000000, + .actim_ctrla = 0x594ca242, + .actim_ctrlb = 0x00022310, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [4] = { + .rate = 0 + }, +}; + +#endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index cbfbd142e94..4c65f5628b3 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -119,8 +119,15 @@ int omap2_sdrc_get_params(unsigned long r, void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) { - omap2_sdrc_base = omap2_globals->sdrc; - omap2_sms_base = omap2_globals->sms; + /* Static mapping, never released */ + if (omap2_globals->sdrc) { + omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K); + WARN_ON(!omap2_sdrc_base); + } + if (omap2_globals->sms) { + omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K); + WARN_ON(!omap2_sms_base); + } } /** diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 5f3035ec0d6..b79bc8926cc 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -23,6 +23,7 @@ #include <linux/serial_reg.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/delay.h> #include <plat/common.h> #include <plat/board.h> @@ -160,6 +161,13 @@ static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, return (unsigned int)__raw_readb(up->membase + offset); } +static inline void __serial_write_reg(struct uart_port *up, int offset, + int value) +{ + offset <<= up->regshift; + __raw_writeb(value, up->membase + offset); +} + static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, int value) { @@ -620,6 +628,20 @@ static unsigned int serial_in_override(struct uart_port *up, int offset) return __serial_read_reg(up, offset); } +static void serial_out_override(struct uart_port *up, int offset, int value) +{ + unsigned int status, tmout = 10000; + + status = __serial_read_reg(up, UART_LSR); + while (!(status & UART_LSR_THRE)) { + /* Wait up to 10ms for the character(s) to be sent. */ + if (--tmout == 0) + break; + udelay(1); + status = __serial_read_reg(up, UART_LSR); + } + __serial_write_reg(up, offset, value); +} void __init omap_serial_early_init(void) { int i; @@ -721,11 +743,14 @@ void __init omap_serial_init_port(int port) * omap3xxx: Never read empty UART fifo on UARTs * with IP rev >=0x52 */ - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx()) { uart->p->serial_in = serial_in_override; - else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) - >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->p->serial_out = serial_out_override; + } else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) { uart->p->serial_in = serial_in_override; + uart->p->serial_out = serial_out_override; + } } /** diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 22fcc14e63b..d522cd70bf5 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -33,6 +33,8 @@ #include "prm.h" #include "sdrc.h" +#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c + #define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ OMAP3430_PM_PREPWSTST) #define PM_PREPWSTST_CORE_P 0x48306AE8 @@ -57,6 +59,37 @@ #define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) #define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) + .text +/* Function to aquire the semaphore in scratchpad */ +ENTRY(lock_scratchpad_sem) + stmfd sp!, {lr} @ save registers on stack +wait_sem: + mov r0,#1 + ldr r1, sdrc_scratchpad_sem +wait_loop: + ldr r2, [r1] @ load the lock value + cmp r2, r0 @ is the lock free ? + beq wait_loop @ not free... + swp r2, r0, [r1] @ semaphore free so lock it and proceed + cmp r2, r0 @ did we succeed ? + beq wait_sem @ no - try again + ldmfd sp!, {pc} @ restore regs and return +sdrc_scratchpad_sem: + .word SDRC_SCRATCHPAD_SEM_V +ENTRY(lock_scratchpad_sem_sz) + .word . - lock_scratchpad_sem + + .text +/* Function to release the scratchpad semaphore */ +ENTRY(unlock_scratchpad_sem) + stmfd sp!, {lr} @ save registers on stack + ldr r3, sdrc_scratchpad_sem + mov r2,#0 + str r2,[r3] + ldmfd sp!, {pc} @ restore regs and return +ENTRY(unlock_scratchpad_sem_sz) + .word . - unlock_scratchpad_sem + .text /* Function call to get the restore pointer for resume from OFF */ ENTRY(get_restore_pointer) @@ -251,6 +284,21 @@ restore: mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) +#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE + /* Restore L2 aux control register */ + @ set service ID for PPA + mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID + mov r12, r0 @ copy service ID in r12 + mov r1, #0 @ set task ID for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + ldr r4, scratchpad_base + ldr r3, [r4, #0xBC] + adds r3, r3, #8 @ r3 points to parameters + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) +#endif b logic_l1_restore l2_inv_api_params: .word 0x1, 0x00 @@ -264,6 +312,11 @@ smi: .word 0xE1600070 @ Call SMI monitor (smieq) ldr r0, [r3,#4] mov r12, #0x3 .word 0xE1600070 @ Call SMI monitor (smieq) + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldr r0, [r3,#12] + mov r12, #0x2 + .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: mov r1, #0 /* Invalidate all instruction caches to PoU @@ -272,7 +325,7 @@ logic_l1_restore: ldr r4, scratchpad_base ldr r3, [r4,#0xBC] - adds r3, r3, #8 + adds r3, r3, #16 ldmia r3!, {r4-r6} mov sp, r4 msr spsr_cxsf, r5 @@ -391,7 +444,9 @@ save_context_wfi: mov r8, r0 /* Store SDRAM address in r8 */ mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register mov r4, #0x1 @ Number of parameters for restore call - stmia r8!, {r4-r5} + stmia r8!, {r4-r5} @ Push parameters for restore call + mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register + stmia r8!, {r4-r5} @ Push parameters for restore call /* Check what that target sleep state is:stored in r1*/ /* 1 - Only L1 and logic lost */ /* 2 - Only L2 lost */ diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c index c1a650a9910..954682e6439 100644 --- a/arch/arm/mach-omap2/timer-mpu.c +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -28,7 +28,7 @@ */ void __cpuinit local_timer_setup(struct clock_event_device *evt) { - evt->irq = INT_44XX_LOCALTIMER_IRQ; + evt->irq = OMAP44XX_IRQ_LOCALTIMER; twd_timer_setup(evt); } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index a80441dd19b..6d41fa7b2ce 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -47,70 +47,11 @@ static struct resource musb_resources[] = { }, }; -static int clk_on; - -static int musb_set_clock(struct clk *clk, int state) -{ - if (state) { - if (clk_on > 0) - return -ENODEV; - - clk_enable(clk); - clk_on = 1; - } else { - if (clk_on == 0) - return -ENODEV; - - clk_disable(clk); - clk_on = 0; - } - - return 0; -} - -static struct musb_hdrc_eps_bits musb_eps[] = { - { "ep1_tx", 10, }, - { "ep1_rx", 10, }, - { "ep2_tx", 9, }, - { "ep2_rx", 9, }, - { "ep3_tx", 3, }, - { "ep3_rx", 3, }, - { "ep4_tx", 3, }, - { "ep4_rx", 3, }, - { "ep5_tx", 3, }, - { "ep5_rx", 3, }, - { "ep6_tx", 3, }, - { "ep6_rx", 3, }, - { "ep7_tx", 3, }, - { "ep7_rx", 3, }, - { "ep8_tx", 2, }, - { "ep8_rx", 2, }, - { "ep9_tx", 2, }, - { "ep9_rx", 2, }, - { "ep10_tx", 2, }, - { "ep10_rx", 2, }, - { "ep11_tx", 2, }, - { "ep11_rx", 2, }, - { "ep12_tx", 2, }, - { "ep12_rx", 2, }, - { "ep13_tx", 2, }, - { "ep13_rx", 2, }, - { "ep14_tx", 2, }, - { "ep14_rx", 2, }, - { "ep15_tx", 2, }, - { "ep15_rx", 2, }, -}; - static struct musb_hdrc_config musb_config = { .multipoint = 1, .dyn_fifo = 1, - .soft_con = 1, - .dma = 1, .num_eps = 16, - .dma_channels = 7, - .dma_req_chan = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3), .ram_bits = 12, - .eps_bits = musb_eps, }; static struct musb_hdrc_platform_data musb_plat = { @@ -122,7 +63,6 @@ static struct musb_hdrc_platform_data musb_plat = { .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ - .set_clock = musb_set_clock, .config = &musb_config, /* REVISIT charge pump on TWL4030 can supply up to @@ -146,28 +86,34 @@ static struct platform_device musb_device = { .resource = musb_resources, }; -void __init usb_musb_init(void) +void __init usb_musb_init(struct omap_musb_board_data *board_data) { - if (cpu_is_omap243x()) + if (cpu_is_omap243x()) { musb_resources[0].start = OMAP243X_HS_BASE; - else + } else if (cpu_is_omap34xx()) { musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE; - musb_resources[0].end = musb_resources[0].start + SZ_8K - 1; + } else if (cpu_is_omap44xx()) { + musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE; + musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N; + musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N; + } + musb_resources[0].end = musb_resources[0].start + SZ_4K - 1; /* * REVISIT: This line can be removed once all the platforms using * musb_core.c have been converted to use use clkdev. */ musb_plat.clock = "ick"; + musb_plat.board_data = board_data; + musb_plat.power = board_data->power >> 1; + musb_plat.mode = board_data->mode; - if (platform_device_register(&musb_device) < 0) { + if (platform_device_register(&musb_device) < 0) printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); - return; - } } #else -void __init usb_musb_init(void) +void __init usb_musb_init(struct omap_musb_board_data *board_data) { } #endif /* CONFIG_USB_MUSB_SOC */ |