diff options
Diffstat (limited to 'arch/arm/mach-omap2')
47 files changed, 1085 insertions, 226 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a34d0f7d1bf..904bd1dfcd2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -43,8 +43,10 @@ config ARCH_OMAP4 bool "TI OMAP4" default y depends on ARCH_OMAP2PLUS + select CACHE_L2X0 select CPU_V7 select ARM_GIC + select HAVE_SMP select LOCAL_TIMERS if SMP select PL310_ERRATA_588369 select PL310_ERRATA_727915 @@ -322,6 +324,11 @@ config MACH_TI8168EVM depends on SOC_OMAPTI81XX default y +config MACH_TI8148EVM + bool "TI8148 Evaluation Module" + depends on SOC_OMAPTI81XX + default y + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" default y diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 63a5efad70e..fc9b238cbc1 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -237,6 +237,7 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o +obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d88143faca5..7370983f809 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -304,4 +304,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .handle_irq = omap2_intc_handle_irq, .init_machine = omap_2430sdp_init, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 109b434159f..383717ba63b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -633,4 +633,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_3430sdp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 7969dd904bd..6ef350d1ae4 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -218,4 +218,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_sdp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 5f264fad69b..2ceb75d21eb 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -372,11 +372,17 @@ static struct platform_device sdp4430_vbat = { }, }; +static struct platform_device sdp4430_dmic_codec = { + .name = "dmic-codec", + .id = -1, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, + &sdp4430_dmic_codec, }; static struct omap_musb_board_data musb_board_data = { @@ -404,6 +410,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 5, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .pm_caps = MMC_PM_KEEP_POWER, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .ocr_mask = MMC_VDD_165_195, @@ -921,4 +928,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .handle_irq = gic_handle_irq, .init_machine = omap_4430sdp_init, .timer = &omap4_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 7e90f93263d..c3851e8de28 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -101,4 +101,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_crane_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 551cae8d9b8..4b1cfe32e6b 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -24,6 +24,7 @@ #include <linux/i2c/pca953x.h> #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <mach/am35xx.h> @@ -40,6 +41,7 @@ #include "mux.h" #include "control.h" +#include "hsmmc.h" #define AM35XX_EVM_MDIO_FREQUENCY (1000000) @@ -455,6 +457,23 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) static struct omap_board_config_kernel am3517_evm_config[] __initdata = { }; +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 127, + .gpio_wp = 126, + }, + { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 128, + .gpio_wp = 129, + }, + {} /* Terminator */ +}; + + static void __init am3517_evm_init(void) { omap_board_config = am3517_evm_config; @@ -483,6 +502,9 @@ static void __init am3517_evm_init(void) /* MUSB */ am3517_evm_musb_init(); + + /* MMC init function */ + omap2_hsmmc_init(mmc); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") @@ -494,4 +516,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_evm_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 5a66480feed..ac773829941 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -357,4 +357,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .handle_irq = omap2_intc_handle_irq, .init_machine = omap_apollon_init, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 510b6a2ff0f..e921e3be24a 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -53,7 +53,8 @@ #include "hsmmc.h" #include "common-board-devices.h" -#define CM_T35_GPIO_PENDOWN 57 +#define CM_T35_GPIO_PENDOWN 57 +#define SB_T35_USB_HUB_RESET_GPIO 167 #define CM_T35_SMSC911X_CS 5 #define CM_T35_SMSC911X_GPIO 163 @@ -339,8 +340,10 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = { REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vdvi_supply[] = { - REGULATOR_SUPPLY("vdvi", "omapdss"), +static struct regulator_consumer_supply cm_t35_vio_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -373,6 +376,19 @@ static struct regulator_init_data cm_t35_vsim = { .consumer_supplies = cm_t35_vsim_supply, }; +static struct regulator_init_data cm_t35_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies), + .consumer_supplies = cm_t35_vio_supplies, +}; + static uint32_t cm_t35_keymap[] = { KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), @@ -421,6 +437,23 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +static void cm_t35_init_usbh(void) +{ + int err; + + err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO, + GPIOF_OUT_INIT_LOW, "usb hub rst"); + if (err) { + pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err); + } else { + udelay(10); + gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); + msleep(1); + } + + usbhs_init(&usbhs_bdata); +} + static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -456,17 +489,14 @@ static struct twl4030_platform_data cm_t35_twldata = { .gpio = &cm_t35_gpio_data, .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, + .vio = &cm_t35_vio, }; static void __init cm_t35_init_i2c(void) { omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - cm_t35_twldata.vpll2->constraints.name = "VDVI"; - cm_t35_twldata.vpll2->num_consumer_supplies = - ARRAY_SIZE(cm_t35_vdvi_supply); - cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply; + TWL_COMMON_REGULATOR_VDAC | + TWL_COMMON_PDATA_AUDIO); omap3_pmic_init("tps65930", &cm_t35_twldata); } @@ -570,24 +600,28 @@ static void __init cm_t3x_common_dss_mux_init(int mux_mode) static void __init cm_t35_init_mux(void) { - omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; + + omap_mux_init_signal("dss_data0.dss_data0", mux_mode); + omap_mux_init_signal("dss_data1.dss_data1", mux_mode); + omap_mux_init_signal("dss_data2.dss_data2", mux_mode); + omap_mux_init_signal("dss_data3.dss_data3", mux_mode); + omap_mux_init_signal("dss_data4.dss_data4", mux_mode); + omap_mux_init_signal("dss_data5.dss_data5", mux_mode); + cm_t3x_common_dss_mux_init(mux_mode); } static void __init cm_t3730_init_mux(void) { - omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; + + omap_mux_init_signal("sys_boot0", mux_mode); + omap_mux_init_signal("sys_boot1", mux_mode); + omap_mux_init_signal("sys_boot3", mux_mode); + omap_mux_init_signal("sys_boot4", mux_mode); + omap_mux_init_signal("sys_boot5", mux_mode); + omap_mux_init_signal("sys_boot6", mux_mode); + cm_t3x_common_dss_mux_init(mux_mode); } #else static inline void cm_t35_init_mux(void) {} @@ -612,7 +646,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_display(); usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); + cm_t35_init_usbh(); } static void __init cm_t35_init(void) @@ -637,6 +671,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t35_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(CM_T3730, "Compulab CM-T3730") @@ -648,4 +683,5 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3730_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index efc5cedb1fb..f36d694d215 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -302,4 +302,5 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index d81ea7fa75e..e873063f4fd 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -663,4 +663,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .handle_irq = omap3_intc_handle_irq, .init_machine = devkit8000_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index a508ed5cc89..d5875606048 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -105,6 +105,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif @@ -124,6 +125,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap243x_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif @@ -142,6 +144,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif @@ -160,5 +163,6 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index ec4018362e8..54af800d143 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -399,4 +399,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .handle_irq = omap2_intc_handle_irq, .init_machine = omap_h4_init, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5949f6ae3ed..a59ace0ed56 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -675,6 +675,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .handle_irq = omap3_intc_handle_irq, .init_machine = igep_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -686,4 +687,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .handle_irq = omap3_intc_handle_irq, .init_machine = igep_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 13bde0e6693..2d2a61f7dcb 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -437,4 +437,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_ldp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 118f38c4b37..42a4d11fad2 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -46,7 +46,7 @@ static struct device *mmc_device; #define TUSB6010_GPIO_ENABLE 0 #define TUSB6010_DMACHAN 0x3f -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and * 1.5 V voltage regulators of PM companion chip. Companion chip will then @@ -692,6 +692,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -703,6 +704,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -714,4 +716,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index c34f5658828..7ffcd2839e7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -562,4 +562,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index f11bc444e7b..003fe34c934 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -684,4 +684,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_evm_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 5fa6bad9574..4198dd017d8 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -211,6 +211,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") @@ -221,4 +222,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index ef315c585b7..1644b73017f 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -609,4 +609,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3pandora_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index b21d70a2e4a..cb089a46f62 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -457,4 +457,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_stalker_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 18cd340f9b7..a0b851aafcc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -384,4 +384,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_touchbook_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index ea45f583510..e96a2e7ad36 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -514,4 +514,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .handle_irq = gic_handle_irq, .init_machine = omap4_panda_init, .timer = &omap4_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 60a61ea759b..52c0cef7716 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -565,4 +565,5 @@ MACHINE_START(OVERO, "Gumstix Overo") .handle_irq = omap3_intc_handle_irq, .init_machine = overo_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index a79d49e3fe0..8678b386c6a 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -152,4 +152,5 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .handle_irq = omap3_intc_handle_irq, .init_machine = rm680_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 108fee6146f..d67bcdf724d 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -15,6 +15,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/wl12xx.h> +#include <linux/spi/tsc2005.h> #include <linux/i2c.h> #include <linux/i2c/twl.h> #include <linux/clk.h> @@ -58,6 +59,9 @@ #define RX51_USB_TRANSCEIVER_RST_GPIO 67 +#define RX51_TSC2005_RESET_GPIO 104 +#define RX51_TSC2005_IRQ_GPIO 100 + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -66,6 +70,7 @@ enum { }; static struct wl12xx_platform_data wl1251_pdata; +static struct tsc2005_platform_data tsc2005_pdata; #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) static struct tsl2563_platform_data rx51_tsl2563_platform_data = { @@ -167,10 +172,10 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .modalias = "tsc2005", .bus_num = 1, .chip_select = 0, - /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/ + .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), .max_speed_hz = 6000000, .controller_data = &tsc2005_mcspi_config, - /* .platform_data = &tsc2005_config,*/ + .platform_data = &tsc2005_pdata, }, }; @@ -1086,6 +1091,42 @@ error: */ } +static struct tsc2005_platform_data tsc2005_pdata = { + .ts_pressure_max = 2048, + .ts_pressure_fudge = 2, + .ts_x_max = 4096, + .ts_x_fudge = 4, + .ts_y_max = 4096, + .ts_y_fudge = 7, + .ts_x_plate_ohm = 280, + .esd_timeout_ms = 8000, +}; + +static void rx51_tsc2005_set_reset(bool enable) +{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); +} + +static void __init rx51_init_tsc2005(void) +{ + int r; + + r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ"); + if (r < 0) { + printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ"); + rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0; + } + + r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "tsc2005 reset"); + if (r >= 0) { + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; + } else { + printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); + tsc2005_pdata.esd_timeout_ms = 0; + } +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1094,6 +1135,7 @@ void __init rx51_peripherals_init(void) board_smc91x_init(); rx51_add_gpio_keys(); rx51_init_wl1251(); + rx51_init_tsc2005(); rx51_init_si4713(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 4e3c0965edf..27f01f051df 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -130,4 +130,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .handle_irq = omap3_intc_handle_irq, .init_machine = rx51_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index b236fcc023a..ab9a7a9e9d6 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -1,5 +1,5 @@ /* - * Code for TI8168 EVM. + * Code for TI8168/TI8148 EVM. * * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ * @@ -23,16 +23,25 @@ #include <plat/irqs.h> #include <plat/board.h> #include "common.h" +#include <plat/usb.h> -static struct omap_board_config_kernel ti8168_evm_config[] __initdata = { +static struct omap_musb_board_data musb_board_data = { + .set_phy_power = ti81xx_musb_phy_power, + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 500, }; -static void __init ti8168_evm_init(void) +static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = { +}; + +static void __init ti81xx_evm_init(void) { omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = ti8168_evm_config; - omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); + omap_board_config = ti81xx_evm_config; + omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config); + usb_musb_init(&musb_board_data); } MACHINE_START(TI8168EVM, "ti8168evm") @@ -42,5 +51,17 @@ MACHINE_START(TI8168EVM, "ti8168evm") .init_early = ti81xx_init_early, .init_irq = ti81xx_init_irq, .timer = &omap3_timer, - .init_machine = ti8168_evm_init, + .init_machine = ti81xx_evm_init, + .restart = omap_prcm_restart, +MACHINE_END + +MACHINE_START(TI8148EVM, "ti8148evm") + /* Maintainer: Texas Instruments */ + .atag_offset = 0x100, + .map_io = ti81xx_map_io, + .init_early = ti81xx_init_early, + .init_irq = ti81xx_init_irq, + .timer = &omap3_timer, + .init_machine = ti81xx_evm_init, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 70e5b54a211..5c20bcc57f2 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -138,6 +138,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_zoom_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -149,4 +150,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_zoom_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 60424f41156..d75e5f6b8a0 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -2480,6 +2480,16 @@ static struct clk uart4_fck = { .recalc = &followparent_recalc, }; +static struct clk uart4_fck_am35xx = { + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt2_fck = { .name = "gpt2_fck", .ops = &clkops_omap2_dflt_wait, @@ -3287,7 +3297,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), @@ -3323,7 +3333,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), @@ -3369,20 +3379,18 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "init_60m_fclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), @@ -3403,6 +3411,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), + CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_3505 | CK_3517), CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 0798a802497..08e86d793a1 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -1206,6 +1206,14 @@ static const struct clksel ocp_abe_iclk_div[] = { { .parent = NULL }, }; +static struct clk mpu_periphclk = { + .name = "mpu_periphclk", + .parent = &dpll_mpu_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + static struct clk ocp_abe_iclk = { .name = "ocp_abe_iclk", .parent = &aess_fclk, @@ -3189,6 +3197,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), + CLK("smp_twd", NULL, &mpu_periphclk, CK_443X), CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), @@ -3295,7 +3304,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), - CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), + CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), @@ -3306,7 +3315,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), - CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), + CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), @@ -3314,7 +3323,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), - CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), + CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), @@ -3374,8 +3383,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), - CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), - CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), + CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), + CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 90bd2ae8559..febffde2ff1 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -94,6 +94,7 @@ void omap3_init_early(void); /* Do not use this one */ void am35xx_init_early(void); void ti81xx_init_early(void); void omap4430_init_early(void); +void omap_prcm_restart(char, const char *); /* * IO bases for various OMAP processors diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c15cfada5f1..35d5dffab7e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -336,6 +336,27 @@ static void omap_init_mcpdm(void) static inline void omap_init_mcpdm(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ + defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) + +static void omap_init_dmic(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("dmic"); + if (!oh) { + printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + return; + } + + pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n"); +} +#else +static inline void omap_init_dmic(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -681,6 +702,7 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_mcpdm(); + omap_init_dmic(); omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index f4a1020559a..bd844af13af 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -171,6 +171,17 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, } } +static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) +{ + u32 reg; + + if (mmc->slots[0].internal_clock) { + reg = omap_ctrl_readl(control_devconf1_offset); + reg |= OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); + } +} + static void hsmmc23_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { @@ -179,16 +190,19 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot, if (mmc->slots[0].remux) mmc->slots[0].remux(dev, slot, power_on); - if (power_on) { - /* Only MMC2 supports a CLKIN */ - if (mmc->slots[0].internal_clock) { - u32 reg; + if (power_on) + hsmmc2_select_input_clk_src(mmc); +} - reg = omap_ctrl_readl(control_devconf1_offset); - reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } - } +static int am35x_hsmmc2_set_power(struct device *dev, int slot, + int power_on, int vdd) +{ + struct omap_mmc_platform_data *mmc = dev->platform_data; + + if (power_on) + hsmmc2_select_input_clk_src(mmc); + + return 0; } static int nop_mmc_set_power(struct device *dev, int slot, int power_on, @@ -200,10 +214,12 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) + if (gpio_is_valid(mmc_controller->slots[0].switch_pin) && + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) && + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { @@ -296,6 +312,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].name = hc_name; mmc->nr_slots = 1; mmc->slots[0].caps = c->caps; + mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; if (cpu_is_omap44xx()) @@ -336,11 +353,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, * * temporary HACK: ocr_mask instead of fixed supply */ - mmc->slots[0].ocr_mask = c->ocr_mask; - - if (cpu_is_omap3517() || cpu_is_omap3505()) - mmc->slots[0].set_power = nop_mmc_set_power; + if (cpu_is_omap3505() || cpu_is_omap3517()) + mmc->slots[0].ocr_mask = MMC_VDD_165_195 | + MMC_VDD_26_27 | + MMC_VDD_27_28 | + MMC_VDD_29_30 | + MMC_VDD_30_31 | + MMC_VDD_31_32; else + mmc->slots[0].ocr_mask = c->ocr_mask; + + if (!cpu_is_omap3517() && !cpu_is_omap3505()) mmc->slots[0].features |= HSMMC_HAS_PBIAS; if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) @@ -363,6 +386,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } } + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = nop_mmc_set_power; + /* OMAP3630 HSMMC1 supports only 4-bit */ if (cpu_is_omap3630() && (c->caps & MMC_CAP_8_BIT_DATA)) { @@ -372,6 +398,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } break; case 2: + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = am35x_hsmmc2_set_power; + if (c->ext_clock) c->transceiver = 1; if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index f757e78d4d4..c4409730c4b 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,6 +12,7 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ + u32 pm_caps; /* PM capabilities */ bool transceiver; /* MMC-2 option */ bool ext_clock; /* use external pin for input clock */ bool cover_only; /* No card detect - just cover switch */ diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index ee9416bcc3e..5192cabb40e 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -752,27 +752,65 @@ static void _enable_module(struct omap_hwmod *oh) } /** - * _disable_module - enable CLKCTRL modulemode on OMAP4 + * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4 + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to enter slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully enters + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_idle() function. + */ +static int _omap4_wait_target_disable(struct omap_hwmod *oh) +{ + if (!cpu_is_omap44xx()) + return 0; + + if (!oh) + return -EINVAL; + + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return 0; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * * Disable the PRCM module mode related to the hwmod @oh. - * No return value. + * Return EINVAL if the modulemode is not supported and 0 in case of success. */ -static void _disable_module(struct omap_hwmod *oh) +static int _omap4_disable_module(struct omap_hwmod *oh) { + int v; + /* The module mode does not exist prior OMAP4 */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return; + if (!cpu_is_omap44xx()) + return -EINVAL; if (!oh->clkdm || !oh->prcm.omap4.modulemode) - return; + return -EINVAL; - pr_debug("omap_hwmod: %s: _disable_module\n", oh->name); + pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); omap4_cminst_module_disable(oh->clkdm->prcm_partition, oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); + + v = _omap4_wait_target_disable(oh); + if (v) + pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", + oh->name); + + return 0; } /** @@ -1199,36 +1237,6 @@ static int _wait_target_ready(struct omap_hwmod *oh) } /** - * _wait_target_disable - wait for a module to be disabled - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to enter slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully enters - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_idle() function. - */ -static int _wait_target_disable(struct omap_hwmod *oh) -{ - /* TODO: For now just handle OMAP4+ */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return 0; - - if (!oh) - return -EINVAL; - - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) - return 0; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); -} - -/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod @@ -1589,8 +1597,6 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { - int ret; - pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -1602,11 +1608,9 @@ static int _idle(struct omap_hwmod *oh) if (oh->class->sysc) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); - _disable_module(oh); - ret = _wait_target_disable(oh); - if (ret) - pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", - oh->name); + + _omap4_disable_module(oh); + /* * The module must be in idle mode before disabling any parents * clocks. Otherwise, the parent clock might be disabled before @@ -1707,11 +1711,7 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ - _disable_module(oh); - ret = _wait_target_disable(oh); - if (ret) - pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", - oh->name); + _omap4_disable_module(oh); _disable_clocks(oh); if (oh->clkdm) clkdm_hwmod_disable(oh->clkdm, oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 7f8915ad509..5324e8d93bc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -84,6 +84,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod; static struct omap_hwmod omap3xxx_mcbsp5_hwmod; static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod; static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod; +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod; +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { @@ -164,6 +166,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod; static struct omap_hwmod omap3xxx_uart2_hwmod; static struct omap_hwmod omap3xxx_uart3_hwmod; static struct omap_hwmod omap3xxx_uart4_hwmod; +static struct omap_hwmod am35xx_uart4_hwmod; static struct omap_hwmod omap3xxx_usbhsotg_hwmod; /* l3_core -> usbhsotg interface */ @@ -299,6 +302,23 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* AM35xx: L4 CORE -> UART4 interface */ +static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { + { + .pa_start = OMAP3_UART4_AM35XX_BASE, + .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_uart4_hwmod, + .clk = "uart4_ick", + .addr = am35xx_uart4_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* L4 CORE -> I2C1 interface */ static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { .master = &omap3xxx_l4_core_hwmod, @@ -1162,6 +1182,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -1309,6 +1330,39 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = { .class = &omap2_uart_class, }; +static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { + { .irq = INT_35XX_UART4_IRQ, }, +}; + +static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { + { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, + { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, +}; + +static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = { + &am35xx_l4_core__uart4, +}; + +static struct omap_hwmod am35xx_uart4_hwmod = { + .name = "uart4", + .mpu_irqs = am35xx_uart4_mpu_irqs, + .sdma_reqs = am35xx_uart4_sdma_reqs, + .main_clk = "uart4_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + }, + }, + .slaves = am35xx_uart4_slaves, + .slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves), + .class = &omap2_uart_class, +}; + + static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, @@ -1636,7 +1690,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = { static struct omap_hwmod omap3xxx_i2c1_hwmod = { .name = "i2c1", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap2_i2c1_mpu_irqs, .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2c1_fck", @@ -1670,7 +1724,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = { static struct omap_hwmod omap3xxx_i2c2_hwmod = { .name = "i2c2", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap2_i2c2_mpu_irqs, .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2c2_fck", @@ -1715,7 +1769,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = { static struct omap_hwmod omap3xxx_i2c3_hwmod = { .name = "i2c3", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = i2c3_mpu_irqs, .sdma_reqs = i2c3_sdma_reqs, .main_clk = "i2c3_fck", @@ -3072,7 +3126,35 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; -static struct omap_hwmod omap3xxx_mmc1_hwmod = { +/* See 35xx errata 2.1.1.128 in SPRZ278F */ +static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = { + .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT | + OMAP_HSMMC_BROKEN_MULTIBLOCK_READ), +}; + +static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = { + .name = "mmc1", + .mpu_irqs = omap34xx_mmc1_mpu_irqs, + .sdma_reqs = omap34xx_mmc1_sdma_reqs, + .opt_clks = omap34xx_mmc1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks), + .main_clk = "mmchs1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT, + }, + }, + .dev_attr = &mmc1_pre_es3_dev_attr, + .slaves = omap3xxx_mmc1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), + .class = &omap34xx_mmc_class, +}; + +static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { .name = "mmc1", .mpu_irqs = omap34xx_mmc1_mpu_irqs, .sdma_reqs = omap34xx_mmc1_sdma_reqs, @@ -3115,7 +3197,34 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = { &omap3xxx_l4_core__mmc2, }; -static struct omap_hwmod omap3xxx_mmc2_hwmod = { +/* See 35xx errata 2.1.1.128 in SPRZ278F */ +static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = { + .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ, +}; + +static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = { + .name = "mmc2", + .mpu_irqs = omap34xx_mmc2_mpu_irqs, + .sdma_reqs = omap34xx_mmc2_sdma_reqs, + .opt_clks = omap34xx_mmc2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks), + .main_clk = "mmchs2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT, + }, + }, + .dev_attr = &mmc2_pre_es3_dev_attr, + .slaves = omap3xxx_mmc2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves), + .class = &omap34xx_mmc_class, +}; + +static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { .name = "mmc2", .mpu_irqs = omap34xx_mmc2_mpu_irqs, .sdma_reqs = omap34xx_mmc2_sdma_reqs, @@ -3177,13 +3286,223 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { .class = &omap34xx_mmc_class, }; +/* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ +static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = { + .master = &omap3xxx_usb_host_hs_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap3xxx_usb_host_hs_sysc, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = { + &omap3xxx_usb_host_hs__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = { + { + .name = "uhh", + .pa_start = 0x48064000, + .pa_end = 0x480643ff, + .flags = ADDR_TYPE_RT + }, + { + .name = "ohci", + .pa_start = 0x48064400, + .pa_end = 0x480647ff, + }, + { + .name = "ehci", + .pa_start = 0x48064800, + .pa_end = 0x48064cff, + }, + {} +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usb_host_hs_hwmod, + .clk = "usbhost_ick", + .addr = omap3xxx_usb_host_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = { + &omap3xxx_l4_core__usb_host_hs, +}; + +static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { + { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", }, +}; + +static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { + { .name = "ohci-irq", .irq = 76 }, + { .name = "ehci-irq", .irq = 77 }, + { .irq = -1 } +}; + +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap3xxx_usb_host_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap3xxx_usb_host_hs_irqs, + .main_clk = "usbhost_48m_fck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430ES2_USBHOST_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT, + .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT, + }, + }, + .opt_clks = omap3xxx_usb_host_hs_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks), + .slaves = omap3xxx_usb_host_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves), + .masters = omap3xxx_usb_host_hs_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters), + + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ +static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap3xxx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { + { .name = "tll-irq", .irq = 78 }, + { .irq = -1 } +}; + +static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = { + { + .name = "tll", + .pa_start = 0x48062000, + .pa_end = 0x48062fff, + .flags = ADDR_TYPE_RT + }, + {} +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usb_tll_hs_hwmod, + .clk = "usbtll_ick", + .addr = omap3xxx_usb_tll_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = { + &omap3xxx_l4_core__usb_tll_hs, +}; + +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap3xxx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap3xxx_usb_tll_hs_irqs, + .main_clk = "usbtll_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 3, + .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .idlest_reg_id = 3, + .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT, + }, + }, + .slaves = omap3xxx_usb_tll_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, &omap3xxx_l4_per_hwmod, &omap3xxx_l4_wkup_hwmod, - &omap3xxx_mmc1_hwmod, - &omap3xxx_mmc2_hwmod, &omap3xxx_mmc3_hwmod, &omap3xxx_mpu_hwmod, @@ -3198,12 +3517,12 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_timer9_hwmod, &omap3xxx_timer10_hwmod, &omap3xxx_timer11_hwmod, - &omap3xxx_timer12_hwmod, &omap3xxx_wd_timer2_hwmod, &omap3xxx_uart1_hwmod, &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, + /* dss class */ &omap3xxx_dss_dispc_hwmod, &omap3xxx_dss_dsi1_hwmod, @@ -3245,20 +3564,38 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { NULL, }; +/* GP-only hwmods */ +static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = { + &omap3xxx_timer12_hwmod, + NULL +}; + /* 3430ES1-only hwmods */ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3430es1_dss_core_hwmod, - &omap3xxx_mailbox_hwmod, NULL }; /* 3430ES2+-only hwmods */ static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, - &omap3xxx_mailbox_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, + NULL +}; + +/* <= 3430ES3-only hwmods */ +static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = { + &omap3xxx_pre_es3_mmc1_hwmod, + &omap3xxx_pre_es3_mmc2_hwmod, + NULL +}; + +/* 3430ES3+-only hwmods */ +static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = { + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; @@ -3280,12 +3617,21 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = { &omap36xx_sr2_hwmod, &omap3xxx_usbhsotg_hwmod, &omap3xxx_mailbox_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; static __initdata struct omap_hwmod *am35xx_hwmods[] = { &omap3xxx_dss_core_hwmod, /* XXX ??? */ &am35xx_usbhsotg_hwmod, + &am35xx_uart4_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; @@ -3300,6 +3646,13 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; + /* Register GP-only hwmods. */ + if (omap_type() == OMAP2_DEVICE_TYPE_GP) { + r = omap_hwmod_register(omap3xxx_gp_hwmods); + if (r < 0) + return r; + } + rev = omap_rev(); /* @@ -3338,6 +3691,21 @@ int __init omap3xxx_hwmod_init(void) h = omap3430es2plus_hwmods; }; + if (h) { + r = omap_hwmod_register(h); + if (r < 0) + return r; + } + + h = NULL; + if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 || + rev == OMAP3430_REV_ES2_1) { + h = omap3430_pre_es3_hwmods; + } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || + rev == OMAP3430_REV_ES3_1_2) { + h = omap3430_es3plus_hwmods; + }; + if (h) r = omap_hwmod_register(h); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index daaf165af69..f9f15108176 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -70,6 +70,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod; static struct omap_hwmod omap44xx_mpu_hwmod; static struct omap_hwmod omap44xx_mpu_private_hwmod; static struct omap_hwmod omap44xx_usb_otg_hs_hwmod; +static struct omap_hwmod omap44xx_usb_host_hs_hwmod; +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod; /* * Interconnects omap_hwmod structures @@ -2246,6 +2248,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -2300,7 +2303,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = { .name = "i2c1", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c1_irqs, .sdma_reqs = omap44xx_i2c1_sdma_reqs, .main_clk = "i2c1_fck", @@ -2356,7 +2359,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = { .name = "i2c2", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c2_irqs, .sdma_reqs = omap44xx_i2c2_sdma_reqs, .main_clk = "i2c2_fck", @@ -2412,7 +2415,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = { .name = "i2c3", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c3_irqs, .sdma_reqs = omap44xx_i2c3_sdma_reqs, .main_clk = "i2c3_fck", @@ -2468,7 +2471,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = { .name = "i2c4", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c4_irqs, .sdma_reqs = omap44xx_i2c4_sdma_reqs, .main_clk = "i2c4_fck", @@ -5276,6 +5279,207 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves), }; +/* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ +static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { + .master = &omap44xx_usb_host_hs_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap44xx_usb_host_hs_sysc, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = { + &omap44xx_usb_host_hs__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = { + { + .name = "uhh", + .pa_start = 0x4a064000, + .pa_end = 0x4a0647ff, + .flags = ADDR_TYPE_RT + }, + { + .name = "ohci", + .pa_start = 0x4a064800, + .pa_end = 0x4a064bff, + }, + { + .name = "ehci", + .pa_start = 0x4a064c00, + .pa_end = 0x4a064fff, + }, + {} +}; + +static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = { + { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START }, + { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_host_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_host_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = { + &omap44xx_l4_cfg__usb_host_hs, +}; + +static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap44xx_usb_host_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .main_clk = "usb_host_hs_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .mpu_irqs = omap44xx_usb_host_hs_irqs, + .slaves = omap44xx_usb_host_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves), + .masters = omap44xx_usb_host_hs_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters), + + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ +static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap44xx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = { + { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = { + { + .name = "tll", + .pa_start = 0x4a062000, + .pa_end = 0x4a063fff, + .flags = ADDR_TYPE_RT + }, + {} +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_tll_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_tll_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = { + &omap44xx_l4_cfg__usb_tll_hs, +}; + +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap44xx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .main_clk = "usb_tll_hs_ick", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .mpu_irqs = omap44xx_usb_tll_hs_irqs, + .slaves = omap44xx_usb_tll_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves), +}; + static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* dmm class */ @@ -5415,13 +5619,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_uart3_hwmod, &omap44xx_uart4_hwmod, + /* usb host class */ + &omap44xx_usb_host_hs_hwmod, + &omap44xx_usb_tll_hs_hwmod, + /* usb_otg_hs class */ &omap44xx_usb_otg_hs_hwmod, /* wd_timer class */ &omap44xx_wd_timer2_hwmod, &omap44xx_wd_timer3_hwmod, - NULL, }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 58775e3c847..4c90477e6f8 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -260,3 +260,38 @@ void am35x_set_mode(u8 musb_mode) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); } + +void ti81xx_musb_phy_power(u8 on) +{ + void __iomem *scm_base = NULL; + u32 usbphycfg; + + scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K); + if (!scm_base) { + pr_err("system control module ioremap failed\n"); + return; + } + + usbphycfg = __raw_readl(scm_base + USBCTRL0); + + if (on) { + if (cpu_is_ti816x()) { + usbphycfg |= TI816X_USBPHY0_NORMAL_MODE; + usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC; + } else if (cpu_is_ti814x()) { + usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN + | USBPHY_DPINPUT | USBPHY_DMINPUT); + usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN + | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL); + } + } else { + if (cpu_is_ti816x()) + usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE; + else if (cpu_is_ti814x()) + usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; + + } + __raw_writel(usbphycfg, scm_base + USBCTRL0); + + iounmap(scm_base); +} diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 0f69d8fc562..5aa5435e3ff 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -201,6 +201,8 @@ #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 +#define OMAP3430_EN_UART4_MASK (1 << 23) +#define OMAP3430_EN_UART4_SHIFT 23 #define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 #define OMAP3430_EN_MCSPI3_MASK (1 << 20) diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index c35e5cea9f8..626acfad719 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -25,7 +25,6 @@ #include <linux/delay.h> #include <linux/export.h> -#include <mach/system.h> #include "common.h" #include <plat/prcm.h> #include <plat/irqs.h> @@ -59,7 +58,7 @@ u32 omap_prcm_get_reset_sources(void) EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ -static void omap_prcm_arch_reset(char mode, const char *cmd) +void omap_prcm_restart(char mode, const char *cmd) { s16 prcm_offs = 0; @@ -110,8 +109,6 @@ static void omap_prcm_arch_reset(char mode, const char *cmd) omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ } -void (*arch_reset)(char, const char *) = omap_prcm_arch_reset; - /** * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness * @reg: physical address of module IDLEST register diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index ee3a8ad304c..7479d7ea137 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -1,7 +1,7 @@ /* * SDRC register values for Nokia boards * - * Copyright (C) 2008, 2010 Nokia Corporation + * Copyright (C) 2008, 2010-2011 Nokia Corporation * * Lauri Leukkunen <lauri.leukkunen@nokia.com> * @@ -107,14 +107,37 @@ static const struct sdram_timings nokia_195dot2mhz_timings[] = { }, }; +static const struct sdram_timings nokia_200mhz_timings[] = { + { + .casl = 3, + .tDAL = 30000, + .tDPL = 15000, + .tRRD = 10000, + .tRCD = 20000, + .tRP = 15000, + .tRAS = 40000, + .tRC = 55000, + .tRFC = 140000, + .tXSR = 200000, + + .tREF = 7800, + + .tXP = 2, + .tCKE = 4, + .tWTR = 2 + }, +}; + static const struct { long rate; struct sdram_timings const *data; } nokia_timings[] = { { 83000000, nokia_166mhz_timings }, { 97600000, nokia_97dot6mhz_timings }, + { 100000000, nokia_200mhz_timings }, { 166000000, nokia_166mhz_timings }, { 195200000, nokia_195dot2mhz_timings }, + { 200000000, nokia_200mhz_timings }, }; static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1]; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 9edcd520510..6eeff0e0ae0 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -254,7 +254,6 @@ static struct omap_dm_timer clksrc; /* * clocksource */ -static DEFINE_CLOCK_DATA(cd); static cycle_t clocksource_read_cycles(struct clocksource *cs) { return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); @@ -268,23 +267,12 @@ static struct clocksource clocksource_gpt = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void notrace dmtimer_update_sched_clock(void) +static u32 notrace dmtimer_read_sched_clock(void) { - u32 cyc; - - cyc = __omap_dm_timer_read_counter(&clksrc, 1); - - update_sched_clock(&cd, cyc, (u32)~0); -} - -unsigned long long notrace sched_clock(void) -{ - u32 cyc = 0; - if (clksrc.reserved) - cyc = __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(clksrc.io_base, 1); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); + return 0; } /* Setup free-running counter for clocksource */ @@ -301,7 +289,7 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, __omap_dm_timer_load_start(&clksrc, OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); - init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); + setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) pr_err("Could not register clocksource %s\n", diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 89ae29847c5..771dc781b74 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,51 +28,28 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <plat/usb.h> +#include <plat/omap_device.h> #include "mux.h" #ifdef CONFIG_MFD_OMAP_USB_HOST -#define OMAP_USBHS_DEVICE "usbhs-omap" - -static struct resource usbhs_resources[] = { - { - .name = "uhh", - .flags = IORESOURCE_MEM, - }, - { - .name = "tll", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci-irq", - .flags = IORESOURCE_IRQ, - }, - { - .name = "ohci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ohci-irq", - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device usbhs_device = { - .name = OMAP_USBHS_DEVICE, - .id = 0, - .num_resources = ARRAY_SIZE(usbhs_resources), - .resource = usbhs_resources, -}; +#define OMAP_USBHS_DEVICE "usbhs_omap" +#define USBHS_UHH_HWMODNAME "usb_host_hs" +#define USBHS_TLL_HWMODNAME "usb_tll_hs" static struct usbhs_omap_platform_data usbhs_data; static struct ehci_hcd_omap_platform_data ehci_data; static struct ohci_hcd_omap_platform_data ohci_data; +static struct omap_device_pm_latency omap_uhhtll_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST @@ -508,7 +485,10 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { - int i; + struct omap_hwmod *oh[2]; + struct omap_device *od; + int bus_id = -1; + int i; for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { usbhs_data.port_mode[i] = pdata->port_mode[i]; @@ -523,44 +503,34 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) usbhs_data.ohci_data = &ohci_data; if (cpu_is_omap34xx()) { - usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE; - usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; - usbhs_resources[1].start = OMAP34XX_USBTLL_BASE; - usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; - usbhs_resources[2].start = OMAP34XX_EHCI_BASE; - usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; - usbhs_resources[3].start = INT_34XX_EHCI_IRQ; - usbhs_resources[4].start = OMAP34XX_OHCI_BASE; - usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1; - usbhs_resources[5].start = INT_34XX_OHCI_IRQ; setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); } else if (cpu_is_omap44xx()) { - usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE; - usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1; - usbhs_resources[1].start = OMAP44XX_USBTLL_BASE; - usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; - usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE; - usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; - usbhs_resources[3].start = OMAP44XX_IRQ_EHCI; - usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE; - usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1; - usbhs_resources[5].start = OMAP44XX_IRQ_OHCI; setup_4430ehci_io_mux(pdata->port_mode); setup_4430ohci_io_mux(pdata->port_mode); } - if (platform_device_add_data(&usbhs_device, - &usbhs_data, sizeof(usbhs_data)) < 0) { - printk(KERN_ERR "USBHS platform_device_add_data failed\n"); - goto init_end; + oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME); + if (!oh[0]) { + pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME); + return; } - if (platform_device_register(&usbhs_device) < 0) - printk(KERN_ERR "USBHS platform_device_register failed\n"); + oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME); + if (!oh[1]) { + pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME); + return; + } -init_end: - return; + od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + (void *)&usbhs_data, sizeof(usbhs_data), + omap_uhhtll_latency, + ARRAY_SIZE(omap_uhhtll_latency), false); + if (IS_ERR(od)) { + pr_err("Could not build hwmod devices %s,%s\n", + USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); + return; + } } #else @@ -570,5 +540,3 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } #endif - - diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 267975086a7..8d5ed775dd5 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -93,6 +93,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; + } else if (cpu_is_ti81xx()) { + oh_name = "usb_otg_hs"; + name = "musb-ti81xx"; } else { oh_name = "usb_otg_hs"; name = "musb-omap2430"; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 474559d5b07..c005e2f5e38 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -31,6 +31,14 @@ * VDD data */ +/* OMAP3-common voltagedomain data */ + +static struct voltagedomain omap3_voltdm_wkup = { + .name = "wakeup", +}; + +/* 34xx/36xx voltagedomain data */ + static const struct omap_vfsm_instance omap3_vdd1_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, @@ -63,10 +71,6 @@ static struct voltagedomain omap3_voltdm_core = { .vp = &omap3_vp_core, }; -static struct voltagedomain omap3_voltdm_wkup = { - .name = "wakeup", -}; - static struct voltagedomain *voltagedomains_omap3[] __initdata = { &omap3_voltdm_mpu, &omap3_voltdm_core, @@ -74,11 +78,30 @@ static struct voltagedomain *voltagedomains_omap3[] __initdata = { NULL, }; +/* AM35xx voltagedomain data */ + +static struct voltagedomain am35xx_voltdm_mpu = { + .name = "mpu_iva", +}; + +static struct voltagedomain am35xx_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain *voltagedomains_am35xx[] __initdata = { + &am35xx_voltdm_mpu, + &am35xx_voltdm_core, + &omap3_voltdm_wkup, + NULL, +}; + + static const char *sys_clk_name __initdata = "sys_ck"; void __init omap3xxx_voltagedomains_init(void) { struct voltagedomain *voltdm; + struct voltagedomain **voltdms; int i; /* @@ -93,8 +116,13 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } - for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++) + if (cpu_is_omap3517() || cpu_is_omap3505()) + voltdms = voltagedomains_am35xx; + else + voltdms = voltagedomains_omap3; + + for (i = 0; voltdm = voltdms[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; - voltdm_init(voltagedomains_omap3); + voltdm_init(voltdms); }; |