diff options
Diffstat (limited to 'arch/arm/mach-omap2')
24 files changed, 491 insertions, 603 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index c81bc508e7a..be0f62bf903 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -275,14 +275,14 @@ config MACH_NOKIA_N8X0 select OMAP_PACKAGE_ZAC config MACH_NOKIA_RM680 - bool "Nokia RM-680/696 board" + bool "Nokia N950 (RM-680) / N9 (RM-696) phones" depends on ARCH_OMAP3 default y select MACH_NOKIA_RM696 select OMAP_PACKAGE_CBB config MACH_NOKIA_RX51 - bool "Nokia RX-51 board" + bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 745401020c2..a8004f33b7e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -202,8 +202,6 @@ obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o -obj-$(CONFIG_OMAP_IOMMU) += iommu2.o - iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) @@ -297,4 +295,4 @@ endif emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o obj-y += $(emac-m) $(emac-y) -obj-y += common-board-devices.o twl-common.o +obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 85dfa71e0dc..1cc6696594f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -36,9 +36,6 @@ #include "common.h" #include "omap4-keypad.h" -#include <video/omapdss.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -48,17 +45,13 @@ #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "dss-common.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ -#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ -#define DLP_POWER_ON_GPIO 40 #define GPIO_WIFI_PMENA 54 #define GPIO_WIFI_IRQ 53 @@ -607,154 +600,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static struct nokia_dsi_panel_data dsi1_panel = { - .name = "taal", - .reset_gpio = 102, - .use_ext_te = false, - .ext_te_gpio = 101, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd_device = { - .name = "lcd", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi1_panel, - .phy.dsi = { - .module = 0, - }, - .channel = OMAP_DSS_CHANNEL_LCD, -}; - -static struct nokia_dsi_panel_data dsi2_panel = { - .name = "taal", - .reset_gpio = 104, - .use_ext_te = false, - .ext_te_gpio = 103, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd2_device = { - .name = "lcd2", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi2_panel, - .phy.dsi = { - - .module = 1, - }, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data sdp4430_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device sdp4430_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &sdp4430_hdmi_data, -}; - -static struct picodlp_panel_data sdp4430_picodlp_pdata = { - .picodlp_adapter_id = 2, - .emu_done_gpio = 44, - .pwrgood_gpio = 45, -}; - -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - -static struct omap_dss_device sdp4430_picodlp_device = { - .name = "picodlp", - .driver_name = "picodlp_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, - .data = &sdp4430_picodlp_pdata, -}; - -static struct omap_dss_device *sdp4430_dss_devices[] = { - &sdp4430_lcd_device, - &sdp4430_lcd2_device, - &sdp4430_hdmi_device, - &sdp4430_picodlp_device, -}; - -static struct omap_dss_board_info sdp4430_dss_data = { - .num_devices = ARRAY_SIZE(sdp4430_dss_devices), - .devices = sdp4430_dss_devices, - .default_device = &sdp4430_lcd_device, -}; - -static void __init omap_4430sdp_display_init(void) -{ - int r; - - /* Enable LCD2 by default (instead of Pico DLP) */ - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - sdp4430_picodlp_init(); - omap_display_init(&sdp4430_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index f0715a369c4..53cb380b787 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -21,6 +21,7 @@ #include "common.h" #include "common-board-devices.h" +#include "dss-common.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) #define intc_of_init NULL @@ -40,6 +41,15 @@ static void __init omap_generic_init(void) omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); + + /* + * HACK: call display setup code for selected boards to enable omapdss. + * This will be removed when omapdss supports DT. + */ + if (of_machine_is_compatible("ti,omap4-panda")) + omap4_panda_display_init_of(); + else if (of_machine_is_compatible("ti,omap4-sdp")) + omap_4430sdp_display_init_of(); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 12a3a24d5bb..5c8e9cee2c2 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -37,9 +37,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <video/omapdss.h> - -#include <video/omap-panel-tfp410.h> #include "common.h" #include "soc.h" @@ -48,14 +45,12 @@ #include "control.h" #include "mux.h" #include "common-board-devices.h" +#include "dss-common.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static struct ti_st_plat_data wilink_platform_data = { @@ -409,68 +404,6 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -/* Display DVI */ -#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 - -/* Using generic display panel */ -static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, -}; - -static struct omap_dss_device omap4_panda_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &omap4_dvi_panel, - .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device omap4_panda_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &omap4_panda_hdmi_data, -}; - -static struct omap_dss_device *omap4_panda_dss_devices[] = { - &omap4_panda_dvi_device, - &omap4_panda_hdmi_device, -}; - -static struct omap_dss_board_info omap4_panda_dss_data = { - .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), - .devices = omap4_panda_dss_devices, - .default_device = &omap4_panda_dvi_device, -}; - -static void __init omap4_panda_display_init(void) -{ - - omap_display_init(&omap4_panda_dss_data); - - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} static void omap4_panda_init_rev(void) { diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cbcb1b2dc31..0c777b75e48 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680/696. + * Board support file for Nokia N950 (RM-680) / N9 (RM-696). * * Copyright (C) 2010 Nokia * diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index ee1045c0ad6..f1d6efe079c 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap2/board-rx51.c + * Board support file for Nokia N900 (aka RX-51). * * Copyright (C) 2007, 2008 Nokia * diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 3bbcde87dea..948bcaa82eb 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -214,6 +214,9 @@ static inline void __iomem *omap4_get_scu_base(void) #endif extern void __init gic_init_irq(void); +extern void gic_dist_disable(void); +extern bool gic_dist_disabled(void); +extern void gic_timer_retrigger(void); extern void omap_smc1(u32 fn, u32 arg); extern void __iomem *omap4_get_sar_ram_base(void); extern void omap_do_wfi(void); @@ -221,6 +224,7 @@ extern void omap_do_wfi(void); #ifdef CONFIG_SMP /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern void omap_secondary_startup_4460(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index cafe04660a4..c67a731cfbb 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -129,7 +129,7 @@ static struct platform_device omap2cam_device = { #if defined(CONFIG_IOMMU_API) -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> static struct resource omap3isp_resources[] = { { diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 6282cc82661..fce5aa3fff4 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -23,15 +23,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/omap_drm.h> #include "omap_device.h" #include "omap_hwmod.h" +#include <plat/cpu.h> #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) +static struct omap_drm_platform_data platform_data; + static struct platform_device omap_drm_device = { .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &platform_data, }, .name = "omapdrm", .id = 0, @@ -52,6 +57,8 @@ static int __init omap_init_drm(void) oh->name); } + platform_data.omaprev = GET_OMAP_REVISION(); + return platform_device_register(&omap_drm_device); } diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c new file mode 100644 index 00000000000..679a0478644 --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2012 Texas Instruments, Inc.. + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +#include <video/omapdss.h> +#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-nokia-dsi.h> +#include <video/omap-panel-picodlp.h> + +#include <plat/cpu.h> + +#include "dss-common.h" +#include "mux.h" + +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ + +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +/* Using generic display panel */ +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct omap_dss_device omap4_panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "tfp410", + .data = &omap4_dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device omap4_panda_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, +}; + +static struct omap_dss_device *omap4_panda_dss_devices[] = { + &omap4_panda_dvi_device, + &omap4_panda_hdmi_device, +}; + +static struct omap_dss_board_info omap4_panda_dss_data = { + .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), + .devices = omap4_panda_dss_devices, + .default_device = &omap4_panda_dvi_device, +}; + +void __init omap4_panda_display_init(void) +{ + omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap4_panda_display_init_of(void) +{ + omap_display_init(&omap4_panda_dss_data); +} + + +/* OMAP4 Blaze display data */ + +#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ +#define DLP_POWER_ON_GPIO 40 + +static struct nokia_dsi_panel_data dsi1_panel = { + .name = "taal", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd_device = { + .name = "lcd", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi1_panel, + .phy.dsi = { + .module = 0, + }, + .channel = OMAP_DSS_CHANNEL_LCD, +}; + +static struct nokia_dsi_panel_data dsi2_panel = { + .name = "taal", + .reset_gpio = 104, + .use_ext_te = false, + .ext_te_gpio = 103, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd2_device = { + .name = "lcd2", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi2_panel, + .phy.dsi = { + + .module = 1, + }, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, +}; + +static struct picodlp_panel_data sdp4430_picodlp_pdata = { + .picodlp_adapter_id = 2, + .emu_done_gpio = 44, + .pwrgood_gpio = 45, +}; + +static void sdp4430_picodlp_init(void) +{ + int r; + const struct gpio picodlp_gpios[] = { + {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"}, + {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, + "DLP EMU DONE"}, + {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, + "DLP PWRGOOD"}, + }; + + r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); + if (r) + pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); +} + +static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DISPLAY_SEL_GPIO, 0); + gpio_set_value(DLP_POWER_ON_GPIO, 1); + + return 0; +} + +static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DLP_POWER_ON_GPIO, 0); + gpio_set_value(DISPLAY_SEL_GPIO, 1); +} + +static struct omap_dss_device sdp4430_picodlp_device = { + .name = "picodlp", + .driver_name = "picodlp_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .channel = OMAP_DSS_CHANNEL_LCD2, + .platform_enable = sdp4430_panel_enable_picodlp, + .platform_disable = sdp4430_panel_disable_picodlp, + .data = &sdp4430_picodlp_pdata, +}; + +static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_lcd_device, + &sdp4430_lcd2_device, + &sdp4430_hdmi_device, + &sdp4430_picodlp_device, +}; + +static struct omap_dss_board_info sdp4430_dss_data = { + .num_devices = ARRAY_SIZE(sdp4430_dss_devices), + .devices = sdp4430_dss_devices, + .default_device = &sdp4430_lcd_device, +}; + +void __init omap_4430sdp_display_init(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap_4430sdp_display_init_of(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); +} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h new file mode 100644 index 00000000000..915f6fff510 --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.h @@ -0,0 +1,14 @@ +#ifndef __OMAP_DSS_COMMON__ +#define __OMAP_DSS_COMMON__ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +void __init omap4_panda_display_init(void); +void __init omap4_panda_display_init_of(void); +void __init omap_4430sdp_display_init(void); +void __init omap_4430sdp_display_init_of(void); + +#endif diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c deleted file mode 100644 index eefc37912ef..00000000000 --- a/arch/arm/mach-omap2/iommu2.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * omap iommu: omap2/3 architecture specific functions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, - * Paul Mundt and Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/err.h> -#include <linux/device.h> -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/stringify.h> - -#include <plat/iommu.h> - -/* - * omap2 architecture specific register bit definitions - */ -#define IOMMU_ARCH_VERSION 0x00000011 - -/* SYSCONF */ -#define MMU_SYS_IDLE_SHIFT 3 -#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) - -#define MMU_SYS_SOFTRESET (1 << 1) -#define MMU_SYS_AUTOIDLE 1 - -/* SYSSTATUS */ -#define MMU_SYS_RESETDONE 1 - -/* IRQSTATUS & IRQENABLE */ -#define MMU_IRQ_MULTIHITFAULT (1 << 4) -#define MMU_IRQ_TABLEWALKFAULT (1 << 3) -#define MMU_IRQ_EMUMISS (1 << 2) -#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) -#define MMU_IRQ_TLBMISS (1 << 0) - -#define __MMU_IRQ_FAULT \ - (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT) -#define MMU_IRQ_MASK \ - (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS) -#define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT) -#define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS) - -/* MMU_CNTL */ -#define MMU_CNTL_SHIFT 1 -#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) -#define MMU_CNTL_EML_TLB (1 << 3) -#define MMU_CNTL_TWL_EN (1 << 2) -#define MMU_CNTL_MMU_EN (1 << 1) - -#define get_cam_va_mask(pgsz) \ - (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ - ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ - ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ - ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) - - -static void __iommu_set_twl(struct omap_iommu *obj, bool on) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - if (on) - iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE); - else - iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE); - - l &= ~MMU_CNTL_MASK; - if (on) - l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); - else - l |= (MMU_CNTL_MMU_EN); - - iommu_write_reg(obj, l, MMU_CNTL); -} - - -static int omap2_iommu_enable(struct omap_iommu *obj) -{ - u32 l, pa; - unsigned long timeout; - - if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) - return -EINVAL; - - pa = virt_to_phys(obj->iopgd); - if (!IS_ALIGNED(pa, SZ_16K)) - return -EINVAL; - - iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); - - timeout = jiffies + msecs_to_jiffies(20); - do { - l = iommu_read_reg(obj, MMU_SYSSTATUS); - if (l & MMU_SYS_RESETDONE) - break; - } while (!time_after(jiffies, timeout)); - - if (!(l & MMU_SYS_RESETDONE)) { - dev_err(obj->dev, "can't take mmu out of reset\n"); - return -ENODEV; - } - - l = iommu_read_reg(obj, MMU_REVISION); - dev_info(obj->dev, "%s: version %d.%d\n", obj->name, - (l >> 4) & 0xf, l & 0xf); - - l = iommu_read_reg(obj, MMU_SYSCONFIG); - l &= ~MMU_SYS_IDLE_MASK; - l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); - iommu_write_reg(obj, l, MMU_SYSCONFIG); - - iommu_write_reg(obj, pa, MMU_TTB); - - __iommu_set_twl(obj, true); - - return 0; -} - -static void omap2_iommu_disable(struct omap_iommu *obj) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - l &= ~MMU_CNTL_MASK; - iommu_write_reg(obj, l, MMU_CNTL); - iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); - - dev_dbg(obj->dev, "%s is shutting down\n", obj->name); -} - -static void omap2_iommu_set_twl(struct omap_iommu *obj, bool on) -{ - __iommu_set_twl(obj, false); -} - -static u32 omap2_iommu_fault_isr(struct omap_iommu *obj, u32 *ra) -{ - u32 stat, da; - u32 errs = 0; - - stat = iommu_read_reg(obj, MMU_IRQSTATUS); - stat &= MMU_IRQ_MASK; - if (!stat) { - *ra = 0; - return 0; - } - - da = iommu_read_reg(obj, MMU_FAULT_AD); - *ra = da; - - if (stat & MMU_IRQ_TLBMISS) - errs |= OMAP_IOMMU_ERR_TLB_MISS; - if (stat & MMU_IRQ_TRANSLATIONFAULT) - errs |= OMAP_IOMMU_ERR_TRANS_FAULT; - if (stat & MMU_IRQ_EMUMISS) - errs |= OMAP_IOMMU_ERR_EMU_MISS; - if (stat & MMU_IRQ_TABLEWALKFAULT) - errs |= OMAP_IOMMU_ERR_TBLWALK_FAULT; - if (stat & MMU_IRQ_MULTIHITFAULT) - errs |= OMAP_IOMMU_ERR_MULTIHIT_FAULT; - iommu_write_reg(obj, stat, MMU_IRQSTATUS); - - return errs; -} - -static void omap2_tlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - cr->cam = iommu_read_reg(obj, MMU_READ_CAM); - cr->ram = iommu_read_reg(obj, MMU_READ_RAM); -} - -static void omap2_tlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); - iommu_write_reg(obj, cr->ram, MMU_RAM); -} - -static u32 omap2_cr_to_virt(struct cr_regs *cr) -{ - u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; - u32 mask = get_cam_va_mask(cr->cam & page_size); - - return cr->cam & mask; -} - -static struct cr_regs *omap2_alloc_cr(struct omap_iommu *obj, - struct iotlb_entry *e) -{ - struct cr_regs *cr; - - if (e->da & ~(get_cam_va_mask(e->pgsz))) { - dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, - e->da); - return ERR_PTR(-EINVAL); - } - - cr = kmalloc(sizeof(*cr), GFP_KERNEL); - if (!cr) - return ERR_PTR(-ENOMEM); - - cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid; - cr->ram = e->pa | e->endian | e->elsz | e->mixed; - - return cr; -} - -static inline int omap2_cr_valid(struct cr_regs *cr) -{ - return cr->cam & MMU_CAM_V; -} - -static u32 omap2_get_pte_attr(struct iotlb_entry *e) -{ - u32 attr; - - attr = e->mixed << 5; - attr |= e->endian; - attr |= e->elsz >> 3; - attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) || - (e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6); - return attr; -} - -static ssize_t -omap2_dump_cr(struct omap_iommu *obj, struct cr_regs *cr, char *buf) -{ - char *p = buf; - - /* FIXME: Need more detail analysis of cam/ram */ - p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram, - (cr->cam & MMU_CAM_P) ? 1 : 0); - - return p - buf; -} - -#define pr_reg(name) \ - do { \ - ssize_t bytes; \ - const char *str = "%20s: %08x\n"; \ - const int maxcol = 32; \ - bytes = snprintf(p, maxcol, str, __stringify(name), \ - iommu_read_reg(obj, MMU_##name)); \ - p += bytes; \ - len -= bytes; \ - if (len < maxcol) \ - goto out; \ - } while (0) - -static ssize_t -omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len) -{ - char *p = buf; - - pr_reg(REVISION); - pr_reg(SYSCONFIG); - pr_reg(SYSSTATUS); - pr_reg(IRQSTATUS); - pr_reg(IRQENABLE); - pr_reg(WALKING_ST); - pr_reg(CNTL); - pr_reg(FAULT_AD); - pr_reg(TTB); - pr_reg(LOCK); - pr_reg(LD_TLB); - pr_reg(CAM); - pr_reg(RAM); - pr_reg(GFLUSH); - pr_reg(FLUSH_ENTRY); - pr_reg(READ_CAM); - pr_reg(READ_RAM); - pr_reg(EMU_FAULT_AD); -out: - return p - buf; -} - -static void omap2_iommu_save_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - p[i] = iommu_read_reg(obj, i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_iommu_restore_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - iommu_write_reg(obj, p[i], i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) -{ - e->da = cr->cam & MMU_CAM_VATAG_MASK; - e->pa = cr->ram & MMU_RAM_PADDR_MASK; - e->valid = cr->cam & MMU_CAM_V; - e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; - e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; - e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; - e->mixed = cr->ram & MMU_RAM_MIXED; -} - -static const struct iommu_functions omap2_iommu_ops = { - .version = IOMMU_ARCH_VERSION, - - .enable = omap2_iommu_enable, - .disable = omap2_iommu_disable, - .set_twl = omap2_iommu_set_twl, - .fault_isr = omap2_iommu_fault_isr, - - .tlb_read_cr = omap2_tlb_read_cr, - .tlb_load_cr = omap2_tlb_load_cr, - - .cr_to_e = omap2_cr_to_e, - .cr_to_virt = omap2_cr_to_virt, - .alloc_cr = omap2_alloc_cr, - .cr_valid = omap2_cr_valid, - .dump_cr = omap2_dump_cr, - - .get_pte_attr = omap2_get_pte_attr, - - .save_ctx = omap2_iommu_save_ctx, - .restore_ctx = omap2_iommu_restore_ctx, - .dump_ctx = omap2_iommu_dump_ctx, -}; - -static int __init omap2_iommu_init(void) -{ - return omap_install_iommu_arch(&omap2_iommu_ops); -} -module_init(omap2_iommu_init); - -static void __exit omap2_iommu_exit(void) -{ - omap_uninstall_iommu_arch(&omap2_iommu_ops); -} -module_exit(omap2_iommu_exit); - -MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); -MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 502e3135aad..0ea09faf327 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,8 @@ #include <linux/linkage.h> #include <linux/init.h> +#include "omap44xx.h" + __CPUINIT /* Physical address needed since MMU not enabled yet on secondary core */ @@ -64,3 +66,39 @@ hold: ldr r12,=0x103 b secondary_startup ENDPROC(omap_secondary_startup) +ENTRY(omap_secondary_startup_4460) +hold_2: ldr r12,=0x103 + dsb + smc #0 @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne hold_2 + + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + ldr r1, =OMAP44XX_GIC_DIST_BASE + ldr r0, [r1] + orr r0, #1 + str r0, [r1] + + /* + * we've been released from the wait loop,secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup +ENDPROC(omap_secondary_startup_4460) diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index df298d46707..a6a4ff8744b 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -13,7 +13,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> #include "soc.h" #include "common.h" diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 3f5fd7e3549..aac46bfdbeb 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -68,6 +68,7 @@ struct omap4_cpu_pm_info { void __iomem *scu_sar_addr; void __iomem *wkup_sar_addr; void __iomem *l2x0_sar_addr; + void (*secondary_startup)(void); }; static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); @@ -300,6 +301,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -309,7 +311,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) clear_cpu_prev_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); - set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup)); + set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); scu_pwrst_prepare(cpu, power_state); /* @@ -360,6 +362,11 @@ int __init omap4_mpuss_init(void) pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; + if (cpu_is_omap446x()) + pm_info->secondary_startup = omap_secondary_startup_4460; + else + pm_info->secondary_startup = omap_secondary_startup; + pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); if (!pm_info->pwrdm) { pr_err("Lookup failed for CPU1 pwrdm\n"); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4d05fa8a4e4..cd42d921940 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -32,6 +32,7 @@ #include "iomap.h" #include "common.h" #include "clockdomain.h" +#include "pm.h" #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410FC090 @@ -39,6 +40,8 @@ #define OMAP5_CORE_COUNT 0x2 +u16 pm44xx_errata; + /* SCU base address */ static void __iomem *scu_base; @@ -118,8 +121,37 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * * 4.3.4.2 Power States of CPU0 and CPU1 */ if (booted) { + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + local_irq_disable(); + gic_dist_disable(); + } + clkdm_wakeup(cpu1_clkdm); clkdm_allow_idle(cpu1_clkdm); + + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + while (gic_dist_disabled()) { + udelay(1); + cpu_relax(); + } + gic_timer_retrigger(); + local_irq_enable(); + } } else { dsb_sev(); booted = true; @@ -138,7 +170,14 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * static void __init wakeup_secondary(void) { + void *startup_addr = omap_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); + + if (cpu_is_omap446x()) { + startup_addr = omap_secondary_startup_4460; + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + } + /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing @@ -146,7 +185,7 @@ static void __init wakeup_secondary(void) * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else __raw_writel(virt_to_phys(omap5_secondary_startup), base + OMAP_AUX_CORE_BOOT_1); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 5695885ea34..6897ae21bb8 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/platform_device.h> #include <linux/memblock.h> #include <linux/of_irq.h> @@ -24,6 +25,7 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> +#include <asm/smp_twd.h> #include "omap-wakeupgen.h" #include "soc.h" @@ -42,6 +44,10 @@ static void __iomem *l2cache_base; #endif static void __iomem *sar_ram_base; +static void __iomem *gic_dist_base_addr; +static void __iomem *twd_base; + +#define IRQ_LOCALTIMER 29 #ifdef CONFIG_OMAP4_ERRATA_I688 /* Used to implement memory barrier on DRAM path */ @@ -96,12 +102,14 @@ void __init omap_barriers_init(void) void __init gic_init_irq(void) { void __iomem *omap_irq_base; - void __iomem *gic_dist_base_addr; /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); + BUG_ON(!twd_base); + /* Static mapping, never released */ omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); BUG_ON(!omap_irq_base); @@ -111,6 +119,38 @@ void __init gic_init_irq(void) gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } +void gic_dist_disable(void) +{ + if (gic_dist_base_addr) + __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL); +} + +bool gic_dist_disabled(void) +{ + return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); +} + +void gic_timer_retrigger(void) +{ + u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT); + u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET); + u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + + if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) { + /* + * The local timer interrupt got lost while the distributor was + * disabled. Ack the pending interrupt, and retrigger it. + */ + pr_warn("%s: lost localtimer interrupt\n", __func__); + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) { + __raw_writel(1, twd_base + TWD_TIMER_COUNTER); + twd_ctrl |= TWD_TIMER_CONTROL_ENABLE; + __raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL); + } + } +} + #ifdef CONFIG_CACHE_L2X0 void __iomem *omap4_get_l2cache_base(void) diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index ad8d43b3327..32820d89f5b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -674,6 +674,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .name = "cpgmac0", .class = &am33xx_cpgmac0_hwmod_class, .clkdm_name = "cpsw_125mhz_clkdm", + .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .mpu_irqs = am33xx_cpgmac0_irqs, .main_clk = "cpsw_125mhz_gclk", .prcm = { @@ -685,6 +686,20 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { }; /* + * mdio class + */ +static struct omap_hwmod_class am33xx_mdio_hwmod_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod am33xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am33xx_mdio_hwmod_class, + .clkdm_name = "cpsw_125mhz_clkdm", + .main_clk = "cpsw_125mhz_gclk", +}; + +/* * dcan class */ static struct omap_hwmod_class am33xx_dcan_hwmod_class = { @@ -2501,6 +2516,21 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = { .user = OCP_USER_MPU, }; +struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = { + { + .pa_start = 0x4A101000, + .pa_end = 0x4A101000 + SZ_256 - 1, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { + .master = &am33xx_cpgmac0_hwmod, + .slave = &am33xx_mdio_hwmod, + .addr = am33xx_mdio_addr_space, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = { { .pa_start = 0x48080000, @@ -3371,6 +3401,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__tptc2, &am33xx_l3_s__usbss, &am33xx_l4_hs__cpgmac0, + &am33xx_cpgmac0__mdio, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0f10919f227..ec4499e5a4c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -24,8 +24,8 @@ #include "l4_3xxx.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/iommu.h> #include "am35xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index ce1661d18e5..eb61cfd9452 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -29,8 +29,8 @@ #include <linux/platform_data/omap_ocp2scp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/iommu.h> #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 02c291c8e47..c22503b17ab 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -102,6 +102,15 @@ extern void enable_omap3630_toggle_l2_on_restore(void); static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ +#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) + +#if defined(CONFIG_ARCH_OMAP4) +extern u16 pm44xx_errata; +#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id)) +#else +#define IS_PM44XX_ERRATUM(id) 0 +#endif + #ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 3cf79b54ce6..250d909e38b 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -58,8 +58,6 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) if (IS_ERR(omap_pmu_dev)) return PTR_ERR(omap_pmu_dev); - pm_runtime_enable(&omap_pmu_dev->dev); - return 0; } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b9cff72ceae..7016637b531 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -628,9 +628,9 @@ static void __init omap4_local_timer_init(void) } } #else /* CONFIG_LOCAL_TIMERS */ -static inline void omap4_local_timer_init(void) +static void __init omap4_local_timer_init(void) { - omap4_sync32_timer_init(); + omap4_sync32k_timer_init(); } #endif /* CONFIG_LOCAL_TIMERS */ OMAP_SYS_TIMER(4, local); |