summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-orion5x
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x')
-rw-r--r--arch/arm/mach-orion5x/Kconfig49
-rw-r--r--arch/arm/mach-orion5x/Makefile7
-rw-r--r--arch/arm/mach-orion5x/Makefile.boot3
-rw-r--r--arch/arm/mach-orion5x/addr-map.c240
-rw-r--r--arch/arm/mach-orion5x/common.c391
-rw-r--r--arch/arm/mach-orion5x/common.h72
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c361
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c320
-rw-r--r--arch/arm/mach-orion5x/gpio.c226
-rw-r--r--arch/arm/mach-orion5x/irq.c211
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c256
-rw-r--r--arch/arm/mach-orion5x/pci.c559
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c312
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c442
14 files changed, 3449 insertions, 0 deletions
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
new file mode 100644
index 00000000000..93debf33615
--- /dev/null
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -0,0 +1,49 @@
+if ARCH_ORION5X
+
+menu "Orion Implementations"
+
+config MACH_DB88F5281
+ bool "Marvell Orion-2 Development Board"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-2 (88F5281) Development Board
+
+config MACH_RD88F5182
+ bool "Marvell Orion-NAS Reference Design"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-NAS (88F5182) RD2
+
+config MACH_KUROBOX_PRO
+ bool "KuroBox Pro"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ KuroBox Pro platform.
+
+config MACH_DNS323
+ bool "D-Link DNS-323"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ D-Link DNS-323 platform.
+
+config MACH_TS209
+ bool "QNAP TS-109/TS-209"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-109/TS-209 platform.
+
+config MACH_LINKSTATION_PRO
+ bool "Buffalo Linkstation Pro/Live"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation Pro/Live platform. Both v1 and
+ v2 devices are supported.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
new file mode 100644
index 00000000000..9301bf55910
--- /dev/null
+++ b/arch/arm/mach-orion5x/Makefile
@@ -0,0 +1,7 @@
+obj-y += common.o addr-map.o pci.o gpio.o irq.o
+obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
+obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
+obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
+obj-$(CONFIG_MACH_TS209) += ts209-setup.o
diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot
new file mode 100644
index 00000000000..67039c3e0c4
--- /dev/null
+++ b/arch/arm/mach-orion5x/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
new file mode 100644
index 00000000000..6b179371e0a
--- /dev/null
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -0,0 +1,240 @@
+/*
+ * arch/arm/mach-orion5x/addr-map.c
+ *
+ * Address map functions for Marvell Orion 5x SoCs
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * The Orion has fully programable address map. There's a separate address
+ * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
+ * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
+ * address decode windows that allow it to access any of the Orion resources.
+ *
+ * CPU address decoding --
+ * Linux assumes that it is the boot loader that already setup the access to
+ * DDR and internal registers.
+ * Setup access to PCI and PCI-E IO/MEM space is issued by this file.
+ * Setup access to various devices located on the device bus interface (e.g.
+ * flashes, RTC, etc) should be issued by machine-setup.c according to
+ * specific board population (by using orion5x_setup_*_win()).
+ *
+ * Non-CPU Masters address decoding --
+ * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
+ * banks only (the typical use case).
+ * Setup access for each master to DDR is issued by common.c.
+ *
+ * Note: although orion_setbits() and orion_clrbits() are not atomic
+ * no locking is necessary here since code in this file is only called
+ * at boot time when there is no concurrency issues.
+ */
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0
+#define TARGET_DEV_BUS 1
+#define TARGET_PCI 3
+#define TARGET_PCIE 4
+#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
+ ((n) == 1) ? 0xd : \
+ ((n) == 2) ? 0xb : \
+ ((n) == 3) ? 0x7 : 0xf)
+#define ATTR_PCIE_MEM 0x59
+#define ATTR_PCIE_IO 0x51
+#define ATTR_PCIE_WA 0x79
+#define ATTR_PCI_MEM 0x59
+#define ATTR_PCI_IO 0x51
+#define ATTR_DEV_CS0 0x1e
+#define ATTR_DEV_CS1 0x1d
+#define ATTR_DEV_CS2 0x1b
+#define ATTR_DEV_BOOT 0xf
+#define WIN_EN 1
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8))
+#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8))
+#define DDR_MAX_CS 4
+#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
+#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
+#define DDR_BANK_EN 1
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
+
+/*
+ * Gigabit Ethernet Address Decode Windows registers
+ */
+#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8))
+#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8))
+#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4))
+#define ETH_WIN_EN ORION5X_ETH_REG(0x290)
+#define ETH_WIN_PROT ORION5X_ETH_REG(0x294)
+#define ETH_MAX_WIN 6
+#define ETH_MAX_REMAP_WIN 4
+
+
+struct mbus_dram_target_info orion5x_mbus_dram_info;
+
+static int __init orion5x_cpu_win_can_remap(int win)
+{
+ u32 dev, rev;
+
+ orion5x_pcie_id(&dev, &rev);
+ if ((dev == MV88F5281_DEV_ID && win < 4)
+ || (dev == MV88F5182_DEV_ID && win < 2)
+ || (dev == MV88F5181_DEV_ID && win < 2))
+ return 1;
+
+ return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+ u8 target, u8 attr, int remap)
+{
+ orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000);
+ orion5x_write(CPU_WIN_CTRL(win),
+ ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1);
+
+ if (orion5x_cpu_win_can_remap(win)) {
+ if (remap < 0)
+ remap = base;
+
+ orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
+ orion5x_write(CPU_WIN_REMAP_HI(win), 0);
+ }
+}
+
+void __init orion5x_setup_cpu_mbus_bridge(void)
+{
+ int i;
+ int cs;
+
+ /*
+ * First, disable and clear windows.
+ */
+ for (i = 0; i < 8; i++) {
+ orion5x_write(CPU_WIN_BASE(i), 0);
+ orion5x_write(CPU_WIN_CTRL(i), 0);
+ if (orion5x_cpu_win_can_remap(i)) {
+ orion5x_write(CPU_WIN_REMAP_LO(i), 0);
+ orion5x_write(CPU_WIN_REMAP_HI(i), 0);
+ }
+ }
+
+ /*
+ * Setup windows for PCI+PCIe IO+MEM space.
+ */
+ setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE);
+ setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
+ TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE);
+ setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE_MEM, -1);
+ setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
+ TARGET_PCI, ATTR_PCI_MEM, -1);
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(DDR_BASE_CS(i));
+ u32 size = readl(DDR_SIZE_CS(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (size & 1) {
+ struct mbus_dram_window *w;
+
+ w = &orion5x_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ w->base = base & 0xff000000;
+ w->size = (size | 0x00ffffff) + 1;
+ }
+ }
+ orion5x_mbus_dram_info.num_cs = cs;
+}
+
+void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
+{
+ setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+}
+
+void __init orion5x_setup_dev0_win(u32 base, u32 size)
+{
+ setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
+}
+
+void __init orion5x_setup_dev1_win(u32 base, u32 size)
+{
+ setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
+}
+
+void __init orion5x_setup_dev2_win(u32 base, u32 size)
+{
+ setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
+}
+
+void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
+{
+ setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
+}
+
+void __init orion5x_setup_eth_wins(void)
+{
+ int i;
+
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < ETH_MAX_WIN; i++) {
+ orion5x_write(ETH_WIN_BASE(i), 0);
+ orion5x_write(ETH_WIN_SIZE(i), 0);
+ orion5x_setbits(ETH_WIN_EN, 1 << i);
+ orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
+ if (i < ETH_MAX_REMAP_WIN)
+ orion5x_write(ETH_WIN_REMAP(i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 base, size;
+ size = orion5x_read(DDR_SIZE_CS(i));
+ base = orion5x_read(DDR_BASE_CS(i));
+ if (size & DDR_BANK_EN) {
+ base = DDR_REG_TO_BASE(base);
+ size = DDR_REG_TO_SIZE(size);
+ orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
+ orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ TARGET_DDR);
+ orion5x_clrbits(ETH_WIN_EN, 1 << i);
+ orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
+ }
+ }
+}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
new file mode 100644
index 00000000000..439c7784af0
--- /dev/null
+++ b/arch/arm/mach-orion5x/common.c
@@ -0,0 +1,391 @@
+/*
+ * arch/arm/mach-orion5x/common.c
+ *
+ * Core functions for Marvell Orion 5x SoCs
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc orion5x_io_desc[] __initdata = {
+ {
+ .virtual = ORION5X_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
+ .length = ORION5X_REGS_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION5X_PCIE_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
+ .length = ORION5X_PCIE_IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION5X_PCI_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
+ .length = ORION5X_PCI_IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION5X_PCIE_WA_VIRT_BASE,
+ .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
+ .length = ORION5X_PCIE_WA_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init orion5x_map_io(void)
+{
+ iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
+}
+
+/*****************************************************************************
+ * UART
+ ****************************************************************************/
+
+static struct resource orion5x_uart_resources[] = {
+ {
+ .start = UART0_PHYS_BASE,
+ .end = UART0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION5X_UART0,
+ .end = IRQ_ORION5X_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = UART1_PHYS_BASE,
+ .end = UART1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION5X_UART1,
+ .end = IRQ_ORION5X_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct plat_serial8250_port orion5x_uart_data[] = {
+ {
+ .mapbase = UART0_PHYS_BASE,
+ .membase = (char *)UART0_VIRT_BASE,
+ .irq = IRQ_ORION5X_UART0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION5X_TCLK,
+ },
+ {
+ .mapbase = UART1_PHYS_BASE,
+ .membase = (char *)UART1_VIRT_BASE,
+ .irq = IRQ_ORION5X_UART1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION5X_TCLK,
+ },
+ { },
+};
+
+static struct platform_device orion5x_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = orion5x_uart_data,
+ },
+ .resource = orion5x_uart_resources,
+ .num_resources = ARRAY_SIZE(orion5x_uart_resources),
+};
+
+/*******************************************************************************
+ * USB Controller - 2 interfaces
+ ******************************************************************************/
+
+static struct resource orion5x_ehci0_resources[] = {
+ {
+ .start = ORION5X_USB0_PHYS_BASE,
+ .end = ORION5X_USB0_PHYS_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION5X_USB0_CTRL,
+ .end = IRQ_ORION5X_USB0_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource orion5x_ehci1_resources[] = {
+ {
+ .start = ORION5X_USB1_PHYS_BASE,
+ .end = ORION5X_USB1_PHYS_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION5X_USB1_CTRL,
+ .end = IRQ_ORION5X_USB1_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct orion_ehci_data orion5x_ehci_data = {
+ .dram = &orion5x_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device orion5x_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &orion5x_ehci_data,
+ },
+ .resource = orion5x_ehci0_resources,
+ .num_resources = ARRAY_SIZE(orion5x_ehci0_resources),
+};
+
+static struct platform_device orion5x_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &orion5x_ehci_data,
+ },
+ .resource = orion5x_ehci1_resources,
+ .num_resources = ARRAY_SIZE(orion5x_ehci1_resources),
+};
+
+/*****************************************************************************
+ * Gigabit Ethernet port
+ * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ ****************************************************************************/
+
+static struct resource orion5x_eth_shared_resources[] = {
+ {
+ .start = ORION5X_ETH_PHYS_BASE + 0x2000,
+ .end = ORION5X_ETH_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device orion5x_eth_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = orion5x_eth_shared_resources,
+};
+
+static struct resource orion5x_eth_resources[] = {
+ {
+ .name = "eth irq",
+ .start = IRQ_ORION5X_ETH_SUM,
+ .end = IRQ_ORION5X_ETH_SUM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device orion5x_eth = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = orion5x_eth_resources,
+};
+
+void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ orion5x_eth.dev.platform_data = eth_data;
+ platform_device_register(&orion5x_eth_shared);
+ platform_device_register(&orion5x_eth);
+}
+
+/*****************************************************************************
+ * I2C controller
+ * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource orion5x_i2c_resources[] = {
+ {
+ .name = "i2c base",
+ .start = I2C_PHYS_BASE,
+ .end = I2C_PHYS_BASE + 0x20 -1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "i2c irq",
+ .start = IRQ_ORION5X_I2C,
+ .end = IRQ_ORION5X_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion5x_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(orion5x_i2c_resources),
+ .resource = orion5x_i2c_resources,
+ .dev = {
+ .platform_data = &orion5x_i2c_pdata,
+ },
+};
+
+/*****************************************************************************
+ * Sata port
+ ****************************************************************************/
+static struct resource orion5x_sata_resources[] = {
+ {
+ .name = "sata base",
+ .start = ORION5X_SATA_PHYS_BASE,
+ .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "sata irq",
+ .start = IRQ_ORION5X_SATA,
+ .end = IRQ_ORION5X_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion5x_sata = {
+ .name = "sata_mv",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(orion5x_sata_resources),
+ .resource = orion5x_sata_resources,
+};
+
+void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
+{
+ sata_data->dram = &orion5x_mbus_dram_info;
+ orion5x_sata.dev.platform_data = sata_data;
+ platform_device_register(&orion5x_sata);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+
+static void orion5x_timer_init(void)
+{
+ orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
+}
+
+struct sys_timer orion5x_timer = {
+ .init = orion5x_timer_init,
+};
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+
+/*
+ * Identify device ID and rev from PCIE configuration header space '0'.
+ */
+static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
+{
+ orion5x_pcie_id(dev, rev);
+
+ if (*dev == MV88F5281_DEV_ID) {
+ if (*rev == MV88F5281_REV_D2) {
+ *dev_name = "MV88F5281-D2";
+ } else if (*rev == MV88F5281_REV_D1) {
+ *dev_name = "MV88F5281-D1";
+ } else {
+ *dev_name = "MV88F5281-Rev-Unsupported";
+ }
+ } else if (*dev == MV88F5182_DEV_ID) {
+ if (*rev == MV88F5182_REV_A2) {
+ *dev_name = "MV88F5182-A2";
+ } else {
+ *dev_name = "MV88F5182-Rev-Unsupported";
+ }
+ } else if (*dev == MV88F5181_DEV_ID) {
+ if (*rev == MV88F5181_REV_B1) {
+ *dev_name = "MV88F5181-Rev-B1";
+ } else {
+ *dev_name = "MV88F5181-Rev-Unsupported";
+ }
+ } else {
+ *dev_name = "Device-Unknown";
+ }
+}
+
+void __init orion5x_init(void)
+{
+ char *dev_name;
+ u32 dev, rev;
+
+ orion5x_id(&dev, &rev, &dev_name);
+ printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK);
+
+ /*
+ * Setup Orion address map
+ */
+ orion5x_setup_cpu_mbus_bridge();
+ orion5x_setup_eth_wins();
+
+ /*
+ * Register devices.
+ */
+ platform_device_register(&orion5x_uart);
+ platform_device_register(&orion5x_ehci0);
+ if (dev == MV88F5182_DEV_ID)
+ platform_device_register(&orion5x_ehci1);
+ platform_device_register(&orion5x_i2c);
+}
+
+/*
+ * Many orion-based systems have buggy bootloader implementations.
+ * This is a common fixup for bogus memory tags.
+ */
+void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t,
+ char **from, struct meminfo *meminfo)
+{
+ for (; t->hdr.size; t = tag_next(t))
+ if (t->hdr.tag == ATAG_MEM &&
+ (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
+ t->u.mem.start & ~PAGE_MASK)) {
+ printk(KERN_WARNING
+ "Clearing invalid memory bank %dKB@0x%08x\n",
+ t->u.mem.size / 1024, t->u.mem.start);
+ t->hdr.tag = 0;
+ }
+}
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
new file mode 100644
index 00000000000..f4c4c9a72a7
--- /dev/null
+++ b/arch/arm/mach-orion5x/common.h
@@ -0,0 +1,72 @@
+#ifndef __ARCH_ORION5X_COMMON_H
+#define __ARCH_ORION5X_COMMON_H
+
+/*
+ * Basic Orion init functions used early by machine-setup.
+ */
+
+void orion5x_map_io(void);
+void orion5x_init_irq(void);
+void orion5x_init(void);
+extern struct sys_timer orion5x_timer;
+
+/*
+ * Enumerations and functions for Orion windows mapping. Used by Orion core
+ * functions to map its interfaces and by the machine-setup to map its on-
+ * board devices. Details in /mach-orion/addr-map.c
+ */
+extern struct mbus_dram_target_info orion5x_mbus_dram_info;
+void orion5x_setup_cpu_mbus_bridge(void);
+void orion5x_setup_dev_boot_win(u32 base, u32 size);
+void orion5x_setup_dev0_win(u32 base, u32 size);
+void orion5x_setup_dev1_win(u32 base, u32 size);
+void orion5x_setup_dev2_win(u32 base, u32 size);
+void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+void orion5x_setup_eth_wins(void);
+
+/*
+ * Shared code used internally by other Orion core functions.
+ * (/mach-orion/pci.c)
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+void orion5x_pcie_id(u32 *dev, u32 *rev);
+int orion5x_pcie_local_bus_nr(void);
+int orion5x_pci_local_bus_nr(void);
+int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * Valid GPIO pins according to MPP setup, used by machine-setup.
+ * (/mach-orion/gpio.c).
+ */
+
+void orion5x_gpio_set_valid_pins(u32 pins);
+void gpio_display(void); /* debug */
+
+/*
+ * Pull in Orion Ethernet platform_data, used by machine-setup
+ */
+
+struct mv643xx_eth_platform_data;
+
+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+
+/*
+ * Orion Sata platform_data, used by machine-setup
+ */
+
+struct mv_sata_platform_data;
+
+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+
+struct machine_desc;
+struct meminfo;
+struct tag;
+extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *,
+ char **, struct meminfo *);
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
new file mode 100644
index 00000000000..872aed37232
--- /dev/null
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -0,0 +1,361 @@
+/*
+ * arch/arm/mach-orion5x/db88f5281-setup.c
+ *
+ * Marvell Orion-2 Development Board Setup
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/orion_nand.h>
+#include "common.h"
+
+/*****************************************************************************
+ * DB-88F5281 on board devices
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define DB88F5281_NOR_BOOT_BASE 0xf4000000
+#define DB88F5281_NOR_BOOT_SIZE SZ_512K
+
+/*
+ * 7-Segment on Device bus chip select 0
+ */
+
+#define DB88F5281_7SEG_BASE 0xfa000000
+#define DB88F5281_7SEG_SIZE SZ_1K
+
+/*
+ * 32M NOR flash on Device bus chip select 1
+ */
+
+#define DB88F5281_NOR_BASE 0xfc000000
+#define DB88F5281_NOR_SIZE SZ_32M
+
+/*
+ * 32M NAND flash on Device bus chip select 2
+ */
+
+#define DB88F5281_NAND_BASE 0xfa800000
+#define DB88F5281_NAND_SIZE SZ_1K
+
+/*
+ * PCI
+ */
+
+#define DB88F5281_PCI_SLOT0_OFFS 7
+#define DB88F5281_PCI_SLOT0_IRQ_PIN 12
+#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13
+
+/*****************************************************************************
+ * 512M NOR Flash on Device bus Boot CS
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_boot_flash_data = {
+ .width = 1, /* 8 bit bus width */
+};
+
+static struct resource db88f5281_boot_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NOR_BOOT_BASE,
+ .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device db88f5281_boot_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &db88f5281_boot_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &db88f5281_boot_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_nor_flash_data = {
+ .width = 4, /* 32 bit bus width */
+};
+
+static struct resource db88f5281_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NOR_BASE,
+ .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
+};
+
+static struct platform_device db88f5281_nor_flash = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &db88f5281_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &db88f5281_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NAND Flash on Device bus CS2
+ ****************************************************************************/
+
+static struct mtd_partition db88f5281_nand_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "root",
+ .offset = SZ_2M,
+ .size = (SZ_16M - SZ_2M),
+ },
+ {
+ .name = "user",
+ .offset = SZ_16M,
+ .size = SZ_8M,
+ },
+ {
+ .name = "recovery",
+ .offset = (SZ_16M + SZ_8M),
+ .size = SZ_8M,
+ },
+};
+
+static struct resource db88f5281_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NAND_BASE,
+ .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data db88f5281_nand_data = {
+ .parts = db88f5281_nand_parts,
+ .nr_parts = ARRAY_SIZE(db88f5281_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device db88f5281_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &db88f5281_nand_data,
+ },
+ .resource = &db88f5281_nand_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * 7-Segment on Device bus CS0
+ * Dummy counter every 2 sec
+ ****************************************************************************/
+
+static void __iomem *db88f5281_7seg;
+static struct timer_list db88f5281_timer;
+
+static void db88f5281_7seg_event(unsigned long data)
+{
+ static int count = 0;
+ writel(0, db88f5281_7seg + (count << 4));
+ count = (count + 1) & 7;
+ mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+}
+
+static int __init db88f5281_7seg_init(void)
+{
+ if (machine_is_db88f5281()) {
+ db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
+ DB88F5281_7SEG_SIZE);
+ if (!db88f5281_7seg) {
+ printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
+ return -EIO;
+ }
+ setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
+ mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+ }
+
+ return 0;
+}
+
+__initcall(db88f5281_7seg_init);
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init db88f5281_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+ }
+
+ pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int2") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit faield "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCIE IRQ is connected internally (not GPIO)
+ */
+ if (dev->bus->number == orion5x_pcie_local_bus_nr())
+ return IRQ_ORION5X_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
+ case 0:
+ return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
+ case 1:
+ case 2:
+ return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci db88f5281_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = db88f5281_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = db88f5281_pci_map_irq,
+};
+
+static int __init db88f5281_pci_init(void)
+{
+ if (machine_is_db88f5281())
+ pci_common_init(&db88f5281_pci);
+
+ return 0;
+}
+
+subsys_initcall(db88f5281_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data db88f5281_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC DS1339 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
+ .driver_name = "rtc-ds1307",
+ .type = "ds1339",
+ .addr = 0x68,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *db88f5281_devs[] __initdata = {
+ &db88f5281_boot_flash,
+ &db88f5281_nor_flash,
+ &db88f5281_nand_flash,
+};
+
+static void __init db88f5281_init(void)
+{
+ /*
+ * Basic Orion setup. Need to be called early.
+ */
+ orion5x_init();
+
+ /*
+ * Setup the CPU address decode windows for our on-board devices
+ */
+ orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
+ DB88F5281_NOR_BOOT_SIZE);
+ orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
+ orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+ orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+
+ /*
+ * Setup Multiplexing Pins:
+ * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input)
+ * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2]
+ * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3]
+ * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1)
+ * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3)
+ * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator)
+ * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2)
+ * MPP14: NAND_REn[2] MPP15: NAND_WEn[2]
+ * MPP16: UART1_RX MPP17: UART1_TX
+ * MPP18: UART1_CTS MPP19: UART1_RTS
+ * MPP-DEV: DEV_D[16:31]
+ */
+ orion5x_write(MPP_0_7_CTRL, 0x00222203);
+ orion5x_write(MPP_8_15_CTRL, 0x44000000);
+ orion5x_write(MPP_16_19_CTRL, 0);
+ orion5x_write(MPP_DEV_CTRL, 0);
+
+ orion5x_gpio_set_valid_pins(0x00003fc3);
+
+ platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
+ i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
+ orion5x_eth_init(&db88f5281_eth_data);
+}
+
+MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
+ /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = db88f5281_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
new file mode 100644
index 00000000000..d67790ef236
--- /dev/null
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -0,0 +1,320 @@
+/*
+ * arch/arm/mach-orion5x/dns323-setup.c
+ *
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+
+#define DNS323_GPIO_LED_RIGHT_AMBER 1
+#define DNS323_GPIO_LED_LEFT_AMBER 2
+#define DNS323_GPIO_LED_POWER 5
+#define DNS323_GPIO_OVERTEMP 6
+#define DNS323_GPIO_RTC 7
+#define DNS323_GPIO_POWER_OFF 8
+#define DNS323_GPIO_KEY_POWER 9
+#define DNS323_GPIO_KEY_RESET 10
+
+/****************************************************************************
+ * PCI setup
+ */
+
+static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /* PCI-E */
+ if (dev->bus->number == orion5x_pcie_local_bus_nr())
+ return IRQ_ORION5X_PCIE0_INT;
+
+ pr_err("%s: requested mapping for unknown bus\n", __func__);
+
+ return -1;
+}
+
+static struct hw_pci dns323_pci __initdata = {
+ .nr_controllers = 1,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = dns323_pci_map_irq,
+};
+
+static int __init dns323_pci_init(void)
+{
+ if (machine_is_dns323())
+ pci_common_init(&dns323_pci);
+
+ return 0;
+}
+
+subsys_initcall(dns323_pci_init);
+
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/****************************************************************************
+ * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
+ *
+ * Layout as used by D-Link:
+ * 0x00000000-0x00010000 : "MTD1"
+ * 0x00010000-0x00020000 : "MTD2"
+ * 0x00020000-0x001a0000 : "Linux Kernel"
+ * 0x001a0000-0x007d0000 : "File System"
+ * 0x007d0000-0x00800000 : "u-boot"
+ */
+
+#define DNS323_NOR_BOOT_BASE 0xf4000000
+#define DNS323_NOR_BOOT_SIZE SZ_8M
+
+static struct mtd_partition dns323_partitions[] = {
+ {
+ .name = "MTD1",
+ .size = 0x00010000,
+ .offset = 0,
+ }, {
+ .name = "MTD2",
+ .size = 0x00010000,
+ .offset = 0x00010000,
+ }, {
+ .name = "Linux Kernel",
+ .size = 0x00180000,
+ .offset = 0x00020000,
+ }, {
+ .name = "File System",
+ .size = 0x00630000,
+ .offset = 0x001A0000,
+ }, {
+ .name = "u-boot",
+ .size = 0x00030000,
+ .offset = 0x007d0000,
+ }
+};
+
+static struct physmap_flash_data dns323_nor_flash_data = {
+ .width = 1,
+ .parts = dns323_partitions,
+ .nr_parts = ARRAY_SIZE(dns323_partitions)
+};
+
+static struct resource dns323_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DNS323_NOR_BOOT_BASE,
+ .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device dns323_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &dns323_nor_flash_data, },
+ .resource = &dns323_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/****************************************************************************
+ * GPIO LEDs (simple - doesn't use hardware blinking support)
+ */
+
+static struct gpio_led dns323_leds[] = {
+ {
+ .name = "power:blue",
+ .gpio = DNS323_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "right:amber",
+ .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "left:amber",
+ .gpio = DNS323_GPIO_LED_LEFT_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dns323_led_data = {
+ .num_leds = ARRAY_SIZE(dns323_leds),
+ .leds = dns323_leds,
+};
+
+static struct platform_device dns323_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = { .platform_data = &dns323_led_data, },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ */
+
+static struct gpio_keys_button dns323_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = DNS323_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = DNS323_GPIO_KEY_POWER,
+ .desc = "Power Button",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data dns323_button_data = {
+ .buttons = dns323_buttons,
+ .nbuttons = ARRAY_SIZE(dns323_buttons),
+};
+
+static struct platform_device dns323_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = { .platform_data = &dns323_button_data, },
+};
+
+/****************************************************************************
+ * General Setup
+ */
+
+static struct platform_device *dns323_plat_devices[] __initdata = {
+ &dns323_nor_flash,
+ &dns323_gpio_leds,
+ &dns323_button_device,
+};
+
+/*
+ * On the DNS-323 the following devices are attached via I2C:
+ *
+ * i2c addr | chip | description
+ * 0x3e | GMT G760Af | fan speed PWM controller
+ * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ * 0x68 | ST M41T80 | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("g760a", 0x3e),
+ .type = "g760a",
+ },
+#if 0
+ /* this entry requires the new-style driver model lm75 driver,
+ * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
+ {
+ I2C_BOARD_INFO("lm75", 0x48),
+ .type = "g751",
+ },
+#endif
+ {
+ I2C_BOARD_INFO("rtc-m41t80", 0x68),
+ .type = "m41t80",
+ }
+};
+
+/* DNS-323 specific power off method */
+static void dns323_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+}
+
+static void __init dns323_init(void)
+{
+ /* Setup basic Orion functions. Need to be called early. */
+ orion5x_init();
+
+ /* setup flash mapping
+ * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
+ */
+ orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+
+ /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
+ *
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+ ORION5X_PCIE_WA_SIZE);
+
+ /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
+ orion5x_write(MPP_0_7_CTRL, 0);
+ orion5x_write(MPP_8_15_CTRL, 0);
+ orion5x_write(MPP_16_19_CTRL, 0);
+ orion5x_write(MPP_DEV_CTRL, 0);
+
+ /* Define used GPIO pins
+
+ GPIO Map:
+
+ | 0 | | PEX_RST_OUT (not controlled by GPIO)
+ | 1 | Out | right amber LED (= sata ch0 LED) (low-active)
+ | 2 | Out | left amber LED (= sata ch1 LED) (low-active)
+ | 3 | Out | //unknown//
+ | 4 | Out | power button LED (low-active, together with pin #5)
+ | 5 | Out | power button LED (low-active, together with pin #4)
+ | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active)
+ | 7 | In | M41T80 nIRQ/OUT/SQW signal
+ | 8 | Out | triggers power off (high-active)
+ | 9 | In | power button switch (low-active)
+ | 10 | In | reset button switch (low-active)
+ | 11 | Out | //unknown//
+ | 12 | Out | //unknown//
+ | 13 | Out | //unknown//
+ | 14 | Out | //unknown//
+ | 15 | Out | //unknown//
+ */
+ orion5x_gpio_set_valid_pins(0x07f6);
+
+ /* register dns323 specific power-off method */
+ if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
+ || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
+ pr_err("DNS323: failed to setup power-off GPIO\n");
+
+ pm_power_off = dns323_power_off;
+
+ /* register flash and other platform devices */
+ platform_add_devices(dns323_plat_devices,
+ ARRAY_SIZE(dns323_plat_devices));
+
+ i2c_register_board_info(0, dns323_i2c_devices,
+ ARRAY_SIZE(dns323_i2c_devices));
+
+ orion5x_eth_init(&dns323_eth_data);
+}
+
+/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(DNS323, "D-Link DNS-323")
+ /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = dns323_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
new file mode 100644
index 00000000000..8108c316c42
--- /dev/null
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -0,0 +1,226 @@
+/*
+ * arch/arm/mach-orion5x/gpio.c
+ *
+ * GPIO functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+
+static DEFINE_SPINLOCK(gpio_lock);
+static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
+
+void __init orion5x_gpio_set_valid_pins(u32 pins)
+{
+ gpio_valid[0] = pins;
+}
+
+/*
+ * GENERIC_GPIO primitives
+ */
+int gpio_direction_input(unsigned pin)
+{
+ unsigned long flags;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /*
+ * Some callers might have not used the gpio_request(),
+ * so flag this pin as requested now.
+ */
+ if (!gpio_label[pin])
+ gpio_label[pin] = "?";
+
+ orion5x_setbits(GPIO_IO_CONF, 1 << pin);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned pin, int value)
+{
+ unsigned long flags;
+ int mask;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /*
+ * Some callers might have not used the gpio_request(),
+ * so flag this pin as requested now.
+ */
+ if (!gpio_label[pin])
+ gpio_label[pin] = "?";
+
+ mask = 1 << pin;
+ orion5x_clrbits(GPIO_BLINK_EN, mask);
+ if (value)
+ orion5x_setbits(GPIO_OUT, mask);
+ else
+ orion5x_clrbits(GPIO_OUT, mask);
+ orion5x_clrbits(GPIO_IO_CONF, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned pin)
+{
+ int val, mask = 1 << pin;
+
+ if (orion5x_read(GPIO_IO_CONF) & mask)
+ val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL);
+ else
+ val = orion5x_read(GPIO_OUT);
+
+ return val & mask;
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned pin, int value)
+{
+ unsigned long flags;
+ int mask = 1 << pin;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ orion5x_clrbits(GPIO_BLINK_EN, mask);
+ if (value)
+ orion5x_setbits(GPIO_OUT, mask);
+ else
+ orion5x_clrbits(GPIO_OUT, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+void orion5x_gpio_set_blink(unsigned pin, int blink)
+{
+ unsigned long flags;
+ int mask = 1 << pin;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ orion5x_clrbits(GPIO_OUT, mask);
+ if (blink)
+ orion5x_setbits(GPIO_BLINK_EN, mask);
+ else
+ orion5x_clrbits(GPIO_BLINK_EN, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(orion5x_gpio_set_blink);
+
+int gpio_request(unsigned pin, const char *label)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ if (gpio_label[pin]) {
+ pr_debug("%s: GPIO %d already used as %s\n",
+ __func__, pin, gpio_label[pin]);
+ ret = -EBUSY;
+ } else
+ gpio_label[pin] = label ? label : "?";
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned pin)
+{
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ return;
+ }
+
+ if (!gpio_label[pin])
+ pr_warning("%s: GPIO %d already freed\n", __func__, pin);
+ else
+ gpio_label[pin] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* Debug helper */
+void gpio_display(void)
+{
+ int i;
+
+ for (i = 0; i < GPIO_MAX; i++) {
+ printk(KERN_DEBUG "Pin-%d: ", i);
+
+ if (!test_bit(i, gpio_valid)) {
+ printk("non-GPIO\n");
+ } else if (!gpio_label[i]) {
+ printk("GPIO, free\n");
+ } else {
+ printk("GPIO, used by %s, ", gpio_label[i]);
+ if (orion5x_read(GPIO_IO_CONF) & (1 << i)) {
+ printk("input, active %s, level %s, edge %s\n",
+ ((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+ ((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+ ((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+ } else {
+ printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1);
+ }
+ }
+ }
+
+ printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
+ MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL));
+ printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
+ MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL));
+ printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
+ MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL));
+ printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
+ MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL));
+ printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
+ GPIO_OUT, orion5x_read(GPIO_OUT));
+ printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
+ GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF));
+ printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
+ GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN));
+ printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
+ GPIO_IN_POL, orion5x_read(GPIO_IN_POL));
+ printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
+ GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN));
+ printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
+ GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK));
+ printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
+ GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE));
+ printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
+ GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK));
+}
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
new file mode 100644
index 00000000000..dd21f38c5d3
--- /dev/null
+++ b/arch/arm/mach-orion5x/irq.c
@@ -0,0 +1,211 @@
+/*
+ * arch/arm/mach-orion5x/irq.c
+ *
+ * Core IRQ functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Orion GPIO IRQ
+ *
+ * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same
+ * value of the line or the opposite value.
+ *
+ * Level IRQ handlers: DATA_IN is used directly as cause register.
+ * Interrupt are masked by LEVEL_MASK registers.
+ * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE.
+ * Interrupt are masked by EDGE_MASK registers.
+ * Both-edge handlers: Similar to regular Edge handlers, but also swaps
+ * the polarity to catch the next line transaction.
+ * This is a race condition that might not perfectly
+ * work on some use cases.
+ *
+ * Every eight GPIO lines are grouped (OR'ed) before going up to main
+ * cause register.
+ *
+ * EDGE cause mask
+ * data-in /--------| |-----| |----\
+ * -----| |----- ---- to main cause reg
+ * X \----------------| |----/
+ * polarity LEVEL mask
+ *
+ ****************************************************************************/
+static void orion5x_gpio_irq_ack(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ /*
+ * Mask bit for level interrupt
+ */
+ orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ /*
+ * Clear casue bit for egde interrupt
+ */
+ orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
+}
+
+static void orion5x_gpio_irq_mask(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin);
+}
+
+static void orion5x_gpio_irq_unmask(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ orion5x_setbits(GPIO_EDGE_MASK, 1 << pin);
+}
+
+static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
+{
+ int pin = irq_to_gpio(irq);
+ struct irq_desc *desc;
+
+ if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+ printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
+ "(irq %d, pin %d).\n", irq, pin);
+ return -EINVAL;
+ }
+
+ desc = irq_desc + irq;
+
+ switch (type) {
+ case IRQT_HIGH:
+ desc->handle_irq = handle_level_irq;
+ desc->status |= IRQ_LEVEL;
+ orion5x_clrbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_LOW:
+ desc->handle_irq = handle_level_irq;
+ desc->status |= IRQ_LEVEL;
+ orion5x_setbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_RISING:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ orion5x_clrbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_FALLING:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ orion5x_setbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_BOTHEDGE:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ /*
+ * set initial polarity based on current input level
+ */
+ if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN))
+ & (1 << pin))
+ orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
+ else
+ orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
+
+ break;
+ default:
+ printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
+ return -EINVAL;
+ }
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+ return 0;
+}
+
+static struct irq_chip orion5x_gpio_irq_chip = {
+ .name = "Orion-IRQ-GPIO",
+ .ack = orion5x_gpio_irq_ack,
+ .mask = orion5x_gpio_irq_mask,
+ .unmask = orion5x_gpio_irq_unmask,
+ .set_type = orion5x_gpio_set_irq_type,
+};
+
+static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ u32 cause, offs, pin;
+
+ BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
+ offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
+ cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) |
+ (orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK));
+
+ for (pin = offs; pin < offs + 8; pin++) {
+ if (cause & (1 << pin)) {
+ irq = gpio_to_irq(pin);
+ desc = irq_desc + irq;
+ if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+ /* Swap polarity (race with GPIO line) */
+ u32 polarity = orion5x_read(GPIO_IN_POL);
+ polarity ^= 1 << pin;
+ orion5x_write(GPIO_IN_POL, polarity);
+ }
+ desc_handle_irq(irq, desc);
+ }
+ }
+}
+
+static void __init orion5x_init_gpio_irq(void)
+{
+ int i;
+ struct irq_desc *desc;
+
+ /*
+ * Mask and clear GPIO IRQ interrupts
+ */
+ orion5x_write(GPIO_LEVEL_MASK, 0x0);
+ orion5x_write(GPIO_EDGE_MASK, 0x0);
+ orion5x_write(GPIO_EDGE_CAUSE, 0x0);
+
+ /*
+ * Register chained level handlers for GPIO IRQs by default.
+ * User can use set_type() if he wants to use edge types handlers.
+ */
+ for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
+ set_irq_chip(i, &orion5x_gpio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ desc = irq_desc + i;
+ desc->status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler);
+}
+
+/*****************************************************************************
+ * Orion Main IRQ
+ ****************************************************************************/
+static void __init orion5x_init_main_irq(void)
+{
+ orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
+}
+
+void __init orion5x_init_irq(void)
+{
+ orion5x_init_main_irq();
+ orion5x_init_gpio_irq();
+}
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
new file mode 100644
index 00000000000..91413455beb
--- /dev/null
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -0,0 +1,256 @@
+/*
+ * arch/arm/mach-orion5x/kurobox_pro-setup.c
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/orion_nand.h>
+#include "common.h"
+
+/*****************************************************************************
+ * KUROBOX-PRO Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000
+#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K
+
+/*
+ * 256M NAND flash on Device bus chip select 1
+ */
+
+#define KUROBOX_PRO_NAND_BASE 0xfc000000
+#define KUROBOX_PRO_NAND_SIZE SZ_2M
+
+/*****************************************************************************
+ * 256MB NAND Flash on Device bus CS0
+ ****************************************************************************/
+
+static struct mtd_partition kurobox_pro_nand_parts[] = {
+ {
+ .name = "uImage",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ {
+ .name = "rootfs",
+ .offset = SZ_4M,
+ .size = SZ_64M,
+ },
+ {
+ .name = "extra",
+ .offset = SZ_4M + SZ_64M,
+ .size = SZ_256M - (SZ_4M + SZ_64M),
+ },
+};
+
+static struct resource kurobox_pro_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NAND_BASE,
+ .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data kurobox_pro_nand_data = {
+ .parts = kurobox_pro_nand_parts,
+ .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device kurobox_pro_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &kurobox_pro_nand_data,
+ },
+ .resource = &kurobox_pro_nand_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data kurobox_pro_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource kurobox_pro_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NOR_BOOT_BASE,
+ .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device kurobox_pro_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &kurobox_pro_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &kurobox_pro_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCI isn't used on the Kuro
+ */
+ if (dev->bus->number == orion5x_pcie_local_bus_nr())
+ return IRQ_ORION5X_PCIE0_INT;
+ else
+ printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
+
+ return -1;
+}
+
+static struct hw_pci kurobox_pro_pci __initdata = {
+ .nr_controllers = 1,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = kurobox_pro_pci_map_irq,
+};
+
+static int __init kurobox_pro_pci_init(void)
+{
+ if (machine_is_kurobox_pro())
+ pci_common_init(&kurobox_pro_pci);
+
+ return 0;
+}
+
+subsys_initcall(kurobox_pro_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
+ .driver_name = "rtc-rs5c372",
+ .type = "rs5c372a",
+ .addr = 0x32,
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data kurobox_pro_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static void __init kurobox_pro_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ /*
+ * Setup the CPU address decode windows for our devices
+ */
+ orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
+ KUROBOX_PRO_NOR_BOOT_SIZE);
+ orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
+
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+ ORION5X_PCIE_WA_SIZE);
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0-1] Not used
+ * MPP[2] GPIO Micon
+ * MPP[3] GPIO RTC
+ * MPP[4-5] Not used
+ * MPP[6] Nand Flash REn
+ * MPP[7] Nand Flash WEn
+ * MPP[8-11] Not used
+ * MPP[12] SATA 0 presence Indication
+ * MPP[13] SATA 1 presence Indication
+ * MPP[14] SATA 0 active Indication
+ * MPP[15] SATA 1 active indication
+ * MPP[16-19] Not used
+ */
+ orion5x_write(MPP_0_7_CTRL, 0x44220003);
+ orion5x_write(MPP_8_15_CTRL, 0x55550000);
+ orion5x_write(MPP_16_19_CTRL, 0x0);
+
+ orion5x_gpio_set_valid_pins(0x0000000c);
+
+ platform_device_register(&kurobox_pro_nor_flash);
+ if (machine_is_kurobox_pro())
+ platform_device_register(&kurobox_pro_nand_flash);
+ i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
+ orion5x_eth_init(&kurobox_pro_eth_data);
+ orion5x_sata_init(&kurobox_pro_sata_data);
+}
+
+#ifdef CONFIG_MACH_KUROBOX_PRO
+MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
+ /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = kurobox_pro_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_LINKSTATION_PRO
+MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
+ /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = kurobox_pro_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
new file mode 100644
index 00000000000..fdf99fca85b
--- /dev/null
+++ b/arch/arm/mach-orion5x/pci.c
@@ -0,0 +1,559 @@
+/*
+ * arch/arm/mach-orion5x/pci.c
+ *
+ * PCI and PCIe functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Orion has one PCIe controller and one PCI controller.
+ *
+ * Note1: The local PCIe bus number is '0'. The local PCI bus number
+ * follows the scanned PCIe bridged busses, if any.
+ *
+ * Note2: It is possible for PCI/PCIe agents to access many subsystem's
+ * space, by configuring BARs and Address Decode Windows, e.g. flashes on
+ * device bus, Orion registers, etc. However this code only enable the
+ * access to DDR banks.
+ ****************************************************************************/
+
+
+/*****************************************************************************
+ * PCIe controller
+ ****************************************************************************/
+#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE)
+
+void __init orion5x_pcie_id(u32 *dev, u32 *rev)
+{
+ *dev = orion_pcie_dev_id(PCIE_BASE);
+ *rev = orion_pcie_rev(PCIE_BASE);
+}
+
+int __init orion5x_pcie_local_bus_nr(void)
+{
+ return orion_pcie_get_local_bus_nr(PCIE_BASE);
+}
+
+static int pcie_valid_config(int bus, int dev)
+{
+ /*
+ * Don't go out when trying to access --
+ * 1. nonexisting device on local bus
+ * 2. where there's no device connected (no link)
+ */
+ if (bus == 0 && dev == 0)
+ return 1;
+
+ if (!orion_pcie_link_up(PCIE_BASE))
+ return 0;
+
+ if (bus == 0 && dev != 1)
+ return 0;
+
+ return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion5x_pcie_lock);
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&orion5x_pcie_lock, flags);
+ ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
+
+ return ret;
+}
+
+static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 *val)
+{
+ int ret;
+
+ if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * We only support access to the non-extended configuration
+ * space when using the WA access method (or we would have to
+ * sacrifice 256M of CPU virtual address space.)
+ */
+ if (where >= 0x100) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE,
+ bus, devfn, where, size, val);
+
+ return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&orion5x_pcie_lock, flags);
+ ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops pcie_ops = {
+ .read = pcie_rd_conf,
+ .write = pcie_wr_conf,
+};
+
+
+static int __init pcie_setup(struct pci_sys_data *sys)
+{
+ struct resource *res;
+ int dev;
+
+ /*
+ * Generic PCIe unit setup.
+ */
+ orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info);
+
+ /*
+ * Check whether to apply Orion-1/Orion-NAS PCIe config
+ * read transaction workaround.
+ */
+ dev = orion_pcie_dev_id(PCIE_BASE);
+ if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
+ printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
+ "read transaction workaround\n");
+ pcie_ops.read = pcie_rd_conf_wa;
+ }
+
+ /*
+ * Request resources.
+ */
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("pcie_setup unable to alloc resources");
+
+ /*
+ * IORESOURCE_IO
+ */
+ res[0].name = "PCIe I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ res[0].start = ORION5X_PCIE_IO_BUS_BASE;
+ res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCIe IO resource failed\n");
+ sys->resource[0] = &res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ res[1].name = "PCIe Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = ORION5X_PCIE_MEM_PHYS_BASE;
+ res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCIe Memory resource failed\n");
+ sys->resource[1] = &res[1];
+
+ sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+}
+
+/*****************************************************************************
+ * PCI controller
+ ****************************************************************************/
+#define PCI_MODE ORION5X_PCI_REG(0xd00)
+#define PCI_CMD ORION5X_PCI_REG(0xc00)
+#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14)
+#define PCI_CONF_ADDR ORION5X_PCI_REG(0xc78)
+#define PCI_CONF_DATA ORION5X_PCI_REG(0xc7c)
+
+/*
+ * PCI_MODE bits
+ */
+#define PCI_MODE_64BIT (1 << 2)
+#define PCI_MODE_PCIX ((1 << 4) | (1 << 5))
+
+/*
+ * PCI_CMD bits
+ */
+#define PCI_CMD_HOST_REORDER (1 << 29)
+
+/*
+ * PCI_P2P_CONF bits
+ */
+#define PCI_P2P_BUS_OFFS 16
+#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS)
+#define PCI_P2P_DEV_OFFS 24
+#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS)
+
+/*
+ * PCI_CONF_ADDR bits
+ */
+#define PCI_CONF_REG(reg) ((reg) & 0xfc)
+#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8)
+#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11)
+#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16)
+#define PCI_CONF_ADDR_EN (1 << 31)
+
+/*
+ * Internal configuration space
+ */
+#define PCI_CONF_FUNC_STAT_CMD 0
+#define PCI_CONF_REG_STAT_CMD 4
+#define PCIX_STAT 0x64
+#define PCIX_STAT_BUS_OFFS 8
+#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS)
+
+/*
+ * PCI Address Decode Windows registers
+ */
+#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
+ ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
+ ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
+ ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION5X_PCI_REG(0xc48) : \
+ ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
+ ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
+ ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
+#define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c)
+#define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c)
+
+/*
+ * PCI configuration helpers for BAR settings
+ */
+#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1)
+#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10)
+#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14)
+
+/*
+ * PCI config cycles are done by programming the PCI_CONF_ADDR register
+ * and then reading the PCI_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion5x_pci_lock);
+
+int orion5x_pci_local_bus_nr(void)
+{
+ u32 conf = orion5x_read(PCI_P2P_CONF);
+ return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
+}
+
+static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func,
+ u32 where, u32 size, u32 *val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&orion5x_pci_lock, flags);
+
+ orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+ *val = orion5x_read(PCI_CONF_DATA);
+
+ if (size == 1)
+ *val = (*val >> (8*(where & 0x3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8*(where & 0x3))) & 0xffff;
+
+ spin_unlock_irqrestore(&orion5x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
+ u32 where, u32 size, u32 val)
+{
+ unsigned long flags;
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ spin_lock_irqsave(&orion5x_pci_lock, flags);
+
+ orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+ if (size == 4) {
+ __raw_writel(val, PCI_CONF_DATA);
+ } else if (size == 2) {
+ __raw_writew(val, PCI_CONF_DATA + (where & 0x3));
+ } else if (size == 1) {
+ __raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
+ } else {
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&orion5x_pci_lock, flags);
+
+ return ret;
+}
+
+static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 *val)
+{
+ /*
+ * Don't go out for local device
+ */
+ if (bus->number == orion5x_pci_local_bus_nr() &&
+ PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where, size, val);
+}
+
+static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ if (bus->number == orion5x_pci_local_bus_nr() &&
+ PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where, size, val);
+}
+
+static struct pci_ops pci_ops = {
+ .read = orion5x_pci_rd_conf,
+ .write = orion5x_pci_wr_conf,
+};
+
+static void __init orion5x_pci_set_bus_nr(int nr)
+{
+ u32 p2p = orion5x_read(PCI_P2P_CONF);
+
+ if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) {
+ /*
+ * PCI-X mode
+ */
+ u32 pcix_status, bus, dev;
+ bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
+ dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
+ orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
+ pcix_status &= ~PCIX_STAT_BUS_MASK;
+ pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
+ orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
+ } else {
+ /*
+ * PCI Conventional mode
+ */
+ p2p &= ~PCI_P2P_BUS_MASK;
+ p2p |= (nr << PCI_P2P_BUS_OFFS);
+ orion5x_write(PCI_P2P_CONF, p2p);
+ }
+}
+
+static void __init orion5x_pci_master_slave_enable(void)
+{
+ int bus_nr, func, reg;
+ u32 val;
+
+ bus_nr = orion5x_pci_local_bus_nr();
+ func = PCI_CONF_FUNC_STAT_CMD;
+ reg = PCI_CONF_REG_STAT_CMD;
+ orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val);
+ val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7);
+}
+
+static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
+{
+ u32 win_enable;
+ int bus;
+ int i;
+
+ /*
+ * First, disable windows.
+ */
+ win_enable = 0xffffffff;
+ orion5x_write(PCI_BAR_ENABLE, win_enable);
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ bus = orion5x_pci_local_bus_nr();
+
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+ u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
+ u32 reg;
+ u32 val;
+
+ /*
+ * Write DRAM bank base address register.
+ */
+ reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index);
+ orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val);
+ val = (cs->base & 0xfffff000) | (val & 0xfff);
+ orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val);
+
+ /*
+ * Write DRAM bank size register.
+ */
+ reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
+ orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
+ orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index),
+ (cs->size - 1) & 0xfffff000);
+ orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index),
+ cs->base & 0xfffff000);
+
+ /*
+ * Enable decode window for this chip select.
+ */
+ win_enable &= ~(1 << cs->cs_index);
+ }
+
+ /*
+ * Re-enable decode windows.
+ */
+ orion5x_write(PCI_BAR_ENABLE, win_enable);
+
+ /*
+ * Disable automatic update of address remaping when writing to BARs.
+ */
+ orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
+}
+
+static int __init pci_setup(struct pci_sys_data *sys)
+{
+ struct resource *res;
+
+ /*
+ * Point PCI unit MBUS decode windows to DRAM space.
+ */
+ orion5x_setup_pci_wins(&orion5x_mbus_dram_info);
+
+ /*
+ * Master + Slave enable
+ */
+ orion5x_pci_master_slave_enable();
+
+ /*
+ * Force ordering
+ */
+ orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
+
+ /*
+ * Request resources
+ */
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("pci_setup unable to alloc resources");
+
+ /*
+ * IORESOURCE_IO
+ */
+ res[0].name = "PCI I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ res[0].start = ORION5X_PCI_IO_BUS_BASE;
+ res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCI IO resource failed\n");
+ sys->resource[0] = &res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ res[1].name = "PCI Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = ORION5X_PCI_MEM_PHYS_BASE;
+ res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCI Memory resource failed\n");
+ sys->resource[1] = &res[1];
+
+ sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+}
+
+
+/*****************************************************************************
+ * General PCIe + PCI
+ ****************************************************************************/
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+ /*
+ * Prevent enumeration of root complex.
+ */
+ if (dev->bus->parent == NULL && dev->devfn == 0) {
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
+{
+ int ret = 0;
+
+ if (nr == 0) {
+ orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
+ ret = pcie_setup(sys);
+ } else if (nr == 1) {
+ orion5x_pci_set_bus_nr(sys->busnr);
+ ret = pci_setup(sys);
+ }
+
+ return ret;
+}
+
+struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_bus *bus;
+
+ if (nr == 0) {
+ bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+ } else if (nr == 1) {
+ bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
+ } else {
+ bus = NULL;
+ BUG();
+ }
+
+ return bus;
+}
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
new file mode 100644
index 00000000000..37e8b2dc3ed
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -0,0 +1,312 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define RD88F5182_NOR_BOOT_BASE 0xf4000000
+#define RD88F5182_NOR_BOOT_SIZE SZ_512K
+
+/*
+ * 16M NOR flash on Device bus chip select 1
+ */
+
+#define RD88F5182_NOR_BASE 0xfc000000
+#define RD88F5182_NOR_SIZE SZ_16M
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS 7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
+
+/*
+ * GPIO Debug LED
+ */
+
+#define RD88F5182_GPIO_DBG_LED 0
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data rd88f5182_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource rd88f5182_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = RD88F5182_NOR_BASE,
+ .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
+};
+
+static struct platform_device rd88f5182_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rd88f5182_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &rd88f5182_nor_flash_resource,
+};
+
+#ifdef CONFIG_LEDS
+
+/*****************************************************************************
+ * Use GPIO debug led as CPU active indication
+ ****************************************************************************/
+
+static void rd88f5182_dbgled_event(led_event_t evt)
+{
+ int val;
+
+ if (evt == led_idle_end)
+ val = 1;
+ else if (evt == led_idle_start)
+ val = 0;
+ else
+ return;
+
+ gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
+}
+
+static int __init rd88f5182_dbgled_init(void)
+{
+ int pin;
+
+ if (machine_is_rd88f5182()) {
+ pin = RD88F5182_GPIO_DBG_LED;
+
+ if (gpio_request(pin, "DBGLED") == 0) {
+ if (gpio_direction_output(pin, 0) != 0) {
+ printk(KERN_ERR "rd88f5182_dbgled_init failed "
+ "to set output pin %d\n", pin);
+ gpio_free(pin);
+ return 0;
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_dbgled_init failed "
+ "to request gpio %d\n", pin);
+ return 0;
+ }
+
+ leds_event = rd88f5182_dbgled_event;
+ }
+ return 0;
+}
+
+__initcall(rd88f5182_dbgled_init);
+
+#endif
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init rd88f5182_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCI-E isn't used on the RD2
+ */
+ if (dev->bus->number == orion5x_pcie_local_bus_nr())
+ return IRQ_ORION5X_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1)
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+ else
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = rd88f5182_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+ if (machine_is_rd88f5182())
+ pci_common_init(&rd88f5182_pci);
+
+ return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC DS1338 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
+ .driver_name = "rtc-ds1307",
+ .type = "ds1338",
+ .addr = 0x68,
+};
+
+/*****************************************************************************
+ * Sata
+ ****************************************************************************/
+static struct mv_sata_platform_data rd88f5182_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *rd88f5182_devices[] __initdata = {
+ &rd88f5182_nor_flash,
+};
+
+static void __init rd88f5182_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ /*
+ * Setup the CPU address decode windows for our devices
+ */
+ orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+ RD88F5182_NOR_BOOT_SIZE);
+ orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+ ORION5X_PCIE_WA_SIZE);
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0] Debug Led (GPIO - Out)
+ * MPP[1] Debug Led (GPIO - Out)
+ * MPP[2] N/A
+ * MPP[3] RTC_Int (GPIO - In)
+ * MPP[4] GPIO
+ * MPP[5] GPIO
+ * MPP[6] PCI_intA (GPIO - In)
+ * MPP[7] PCI_intB (GPIO - In)
+ * MPP[8-11] N/A
+ * MPP[12] SATA 0 presence Indication
+ * MPP[13] SATA 1 presence Indication
+ * MPP[14] SATA 0 active Indication
+ * MPP[15] SATA 1 active indication
+ * MPP[16-19] Not used
+ * MPP[20] PCI Clock to MV88F5182
+ * MPP[21] PCI Clock to mini PCI CON11
+ * MPP[22] USB 0 over current indication
+ * MPP[23] USB 1 over current indication
+ * MPP[24] USB 1 over current enable
+ * MPP[25] USB 0 over current enable
+ */
+
+ orion5x_write(MPP_0_7_CTRL, 0x00000003);
+ orion5x_write(MPP_8_15_CTRL, 0x55550000);
+ orion5x_write(MPP_16_19_CTRL, 0x5555);
+
+ orion5x_gpio_set_valid_pins(0x000000fb);
+
+ platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
+ i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
+ orion5x_eth_init(&rd88f5182_eth_data);
+ orion5x_sata_init(&rd88f5182_sata_data);
+}
+
+MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
+ /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f5182_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
new file mode 100644
index 00000000000..fd43863a86f
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -0,0 +1,442 @@
+/*
+ * QNAP TS-109/TS-209 Board Setup
+ *
+ * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+
+#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
+#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ * [2] 0x00000000-0x00200000 : "Kernel"
+ * [3] 0x00200000-0x00600000 : "RootFS1"
+ * [4] 0x00600000-0x00700000 : "RootFS2"
+ * [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ * [5] 0x00760000-0x00780000 : "U-Boot Config"
+ * [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts209_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0x00780000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00400000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00100000,
+ .offset = 0x00600000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00020000,
+ .offset = 0x00760000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00060000,
+ .offset = 0x00700000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct physmap_flash_data qnap_ts209_nor_flash_data = {
+ .width = 1,
+ .parts = qnap_ts209_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
+};
+
+static struct resource qnap_ts209_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = QNAP_TS209_NOR_BOOT_BASE,
+ .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts209_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &qnap_ts209_nor_flash_data, },
+ .resource = &qnap_ts209_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+#define QNAP_TS209_PCI_SLOT0_OFFS 7
+#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6
+#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7
+
+void __init qnap_ts209_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+
+ pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int2") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+}
+
+static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCIE IRQ is connected internally (not GPIO)
+ */
+ if (dev->bus->number == orion5x_pcie_local_bus_nr())
+ return IRQ_ORION5X_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
+ case 0:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
+ case 1:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci qnap_ts209_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = qnap_ts209_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = qnap_ts209_pci_map_irq,
+};
+
+static int __init qnap_ts209_pci_init(void)
+{
+ if (machine_is_ts_x09())
+ pci_common_init(&qnap_ts209_pci);
+
+ return 0;
+}
+
+subsys_initcall(qnap_ts209_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+static int __init parse_hex_nibble(char n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+
+ if (n >= 'A' && n <= 'F')
+ return n - 'A' + 10;
+
+ if (n >= 'a' && n <= 'f')
+ return n - 'a' + 10;
+
+ return -1;
+}
+
+static int __init parse_hex_byte(const char *b)
+{
+ int hi;
+ int lo;
+
+ hi = parse_hex_nibble(b[0]);
+ lo = parse_hex_nibble(b[1]);
+
+ if (hi < 0 || lo < 0)
+ return -1;
+
+ return (hi << 4) | lo;
+}
+
+static int __init check_mac_addr(const char *addr_str)
+{
+ u_int8_t addr[6];
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ int byte;
+
+ /*
+ * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+ */
+ if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+ return -1;
+
+ byte = parse_hex_byte(addr_str + (i * 3));
+ if (byte < 0)
+ return -1;
+ addr[i] = byte;
+ }
+
+ printk(KERN_INFO "ts209: found ethernet mac address ");
+ for (i = 0; i < 6; i++)
+ printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+ memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
+
+ return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n".)
+ */
+static void __init ts209_find_mac_addr(void)
+{
+ unsigned long addr;
+
+ for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
+ char *nor_page;
+ int ret = 0;
+
+ nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
+ if (nor_page != NULL) {
+ ret = check_mac_addr(nor_page);
+ iounmap(nor_page);
+ }
+
+ if (ret == 0)
+ break;
+ }
+}
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+
+#define TS209_RTC_GPIO 3
+
+static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
+ .driver_name = "rtc-s35390a",
+ .addr = 0x30,
+ .irq = 0,
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ * Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS209_GPIO_KEY_MEDIA 1
+#define QNAP_TS209_GPIO_KEY_RESET 2
+
+static struct gpio_keys_button qnap_ts209_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = QNAP_TS209_GPIO_KEY_MEDIA,
+ .desc = "USB Copy Button",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = QNAP_TS209_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data qnap_ts209_button_data = {
+ .buttons = qnap_ts209_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
+};
+
+static struct platform_device qnap_ts209_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = { .platform_data = &qnap_ts209_button_data, },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data qnap_ts209_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *qnap_ts209_devices[] __initdata = {
+ &qnap_ts209_nor_flash,
+ &qnap_ts209_button_device,
+};
+
+/*
+ * QNAP TS-[12]09 specific power off method via UART1-attached PIC
+ */
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static void qnap_ts209_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (19200,8n1) */
+ orion5x_write(UART1_REG(LCR), 0x83);
+ orion5x_write(UART1_REG(DLL), divisor & 0xff);
+ orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
+ orion5x_write(UART1_REG(LCR), 0x03);
+ orion5x_write(UART1_REG(IER), 0x00);
+ orion5x_write(UART1_REG(FCR), 0x00);
+ orion5x_write(UART1_REG(MCR), 0x00);
+
+ /* send the power-off command 'A' to PIC */
+ orion5x_write(UART1_REG(TX), 'A');
+}
+
+static void __init qnap_ts209_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ /*
+ * Setup flash mapping
+ */
+ orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE);
+
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+ ORION5X_PCIE_WA_SIZE);
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0] Reserved
+ * MPP[1] USB copy button (0 active)
+ * MPP[2] Load defaults button (0 active)
+ * MPP[3] GPIO RTC
+ * MPP[4-5] Reserved
+ * MPP[6] PCI Int A
+ * MPP[7] PCI Int B
+ * MPP[8-11] Reserved
+ * MPP[12] SATA 0 presence
+ * MPP[13] SATA 1 presence
+ * MPP[14] SATA 0 active
+ * MPP[15] SATA 1 active
+ * MPP[16] UART1 RXD
+ * MPP[17] UART1 TXD
+ * MPP[18] SW_RST (0 active)
+ * MPP[19] Reserved
+ * MPP[20] PCI clock 0
+ * MPP[21] PCI clock 1
+ * MPP[22] USB 0 over current
+ * MPP[23-25] Reserved
+ */
+ orion5x_write(MPP_0_7_CTRL, 0x3);
+ orion5x_write(MPP_8_15_CTRL, 0x55550000);
+ orion5x_write(MPP_16_19_CTRL, 0x5500);
+ orion5x_gpio_set_valid_pins(0x3cc0fff);
+
+ /* register ts209 specific power-off method */
+ pm_power_off = qnap_ts209_power_off;
+
+ platform_add_devices(qnap_ts209_devices,
+ ARRAY_SIZE(qnap_ts209_devices));
+
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
+ if (gpio_direction_input(TS209_RTC_GPIO) == 0)
+ qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
+ else
+ gpio_free(TS209_RTC_GPIO);
+ }
+ if (qnap_ts209_i2c_rtc.irq == 0)
+ pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
+ i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
+
+ ts209_find_mac_addr();
+ orion5x_eth_init(&qnap_ts209_eth_data);
+
+ orion5x_sata_init(&qnap_ts209_sata_data);
+}
+
+MACHINE_START(TS209, "QNAP TS-109/TS-209")
+ /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts209_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END