diff options
Diffstat (limited to 'arch/arm/mach-orion5x')
| -rw-r--r-- | arch/arm/mach-orion5x/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/common.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/d2net-setup.c | 45 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/dns323-setup.c | 67 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/include/mach/debug-macro.S | 2 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/include/mach/vmalloc.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/ls_hgl-setup.c | 276 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/lsmini-setup.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/pci.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/wrt350n-v2-setup.c | 79 |
11 files changed, 452 insertions, 40 deletions
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index c3d513cad5a..905719a677a 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -57,6 +57,13 @@ config MACH_LINKSTATION_MINI Say 'Y' here if you want your kernel to support the Buffalo Linkstation Mini platform. +config MACH_LINKSTATION_LS_HGL + bool "Buffalo Linkstation LS-HGL" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-HGL platform. + config MACH_TS409 bool "QNAP TS-409" help diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 89772fcd65c..eb6eabcb41e 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o +obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index f87fa125380..8dc2c76d226 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -488,7 +488,7 @@ static struct platform_device orion5x_xor0_channel = { .dev = { .dma_mask = &orion5x_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&orion5x_xor0_data, + .platform_data = &orion5x_xor0_data, }, }; @@ -514,7 +514,7 @@ static struct platform_device orion5x_xor1_channel = { .dev = { .dma_mask = &orion5x_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&orion5x_xor1_data, + .platform_data = &orion5x_xor1_data, }, }; diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 9d4bf763f25..7130904ad99 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -149,10 +149,7 @@ static void __init d2net_sata_power_init(void) /* * The blue front LED is wired to the CPLD and can blink in relation with the - * SATA activity. This feature is disabled to make this LED compatible with - * the leds-gpio driver: MPP14 and MPP15 are configured to act like output - * GPIO's and have to stay in an active state. This is needed to set the blue - * LED in a "fix on" state regardless of the SATA activity. + * SATA activity. * * The following array detail the different LED registers and the combination * of their possible values: @@ -171,12 +168,11 @@ static void __init d2net_sata_power_init(void) #define D2NET_GPIO_RED_LED 6 #define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 #define D2NET_GPIO_BLUE_LED_OFF 23 -#define D2NET_GPIO_SATA0_ACT 14 -#define D2NET_GPIO_SATA1_ACT 15 static struct gpio_led d2net_leds[] = { { - .name = "d2net:blue:power", + .name = "d2net:blue:sata", + .default_trigger = "default-on", .gpio = D2NET_GPIO_BLUE_LED_OFF, .active_low = 1, }, @@ -201,25 +197,22 @@ static struct platform_device d2net_gpio_leds = { static void __init d2net_gpio_leds_init(void) { + int err; + /* Configure GPIO over MPP max number. */ orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); - if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0) - return; - if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0) - goto err_free_1; - if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0) - goto err_free_1; - if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0) - goto err_free_2; - platform_device_register(&d2net_gpio_leds); - return; + /* Configure register blink_ctrl to allow SATA activity LED blinking. */ + err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); + if (err) + gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); + } + if (err) + pr_err("d2net: failed to configure blue LED blink GPIO\n"); -err_free_2: - gpio_free(D2NET_GPIO_SATA1_ACT); -err_free_1: - gpio_free(D2NET_GPIO_SATA0_ACT); - return; + platform_device_register(&d2net_gpio_leds); } /**************************************************************************** @@ -289,8 +282,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { { 11, MPP_UNUSED }, { 12, MPP_GPIO }, /* SATA 1 power */ { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* SATA 0 active */ - { 15, MPP_GPIO }, /* SATA 1 active */ + { 14, MPP_SATA_LED }, /* SATA 0 active */ + { 15, MPP_SATA_LED }, /* SATA 1 active */ { 16, MPP_GPIO }, /* Blue front LED blink control */ { 17, MPP_UNUSED }, { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ @@ -301,6 +294,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ }; +#define D2NET_GPIO_INHIBIT_POWER_OFF 24 + static void __init d2net_init(void) { /* @@ -333,6 +328,8 @@ static void __init d2net_init(void) i2c_register_board_info(0, d2net_i2c_devices, ARRAY_SIZE(d2net_i2c_devices)); + + orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1); } /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index b31ca4cef36..421b82f7c63 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> @@ -32,7 +33,9 @@ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 -#define DNS323_GPIO_LED_POWER 5 +#define DNS323_GPIO_SYSTEM_UP 3 +#define DNS323_GPIO_LED_POWER1 4 +#define DNS323_GPIO_LED_POWER2 5 #define DNS323_GPIO_OVERTEMP 6 #define DNS323_GPIO_RTC 7 #define DNS323_GPIO_POWER_OFF 8 @@ -235,11 +238,31 @@ error_fail: * GPIO LEDs (simple - doesn't use hardware blinking support) */ +#define ORION_BLINK_HALF_PERIOD 100 /* ms */ + +static int dns323_gpio_blink_set(unsigned gpio, + unsigned long *delay_on, unsigned long *delay_off) +{ + static int value = 0; + + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; + + if (ORION_BLINK_HALF_PERIOD == *delay_on + && ORION_BLINK_HALF_PERIOD == *delay_off) { + value = !value; + orion_gpio_set_blink(gpio, value); + return 0; + } + + return -EINVAL; +} + static struct gpio_led dns323_leds[] = { { .name = "power:blue", - .gpio = DNS323_GPIO_LED_POWER, - .active_low = 1, + .gpio = DNS323_GPIO_LED_POWER2, + .default_trigger = "timer", }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, @@ -254,6 +277,7 @@ static struct gpio_led dns323_leds[] = { static struct gpio_led_platform_data dns323_led_data = { .num_leds = ARRAY_SIZE(dns323_leds), .leds = dns323_leds, + .gpio_blink_set = dns323_gpio_blink_set, }; static struct platform_device dns323_gpio_leds = { @@ -334,7 +358,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { { 0, MPP_UNUSED }, { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_UNUSED }, + { 3, MPP_GPIO }, /* system up flag */ { 4, MPP_GPIO }, /* power button LED */ { 5, MPP_GPIO }, /* power button LED */ { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ @@ -372,13 +396,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = { }, }; -/* DNS-323 specific power off method */ -static void dns323_power_off(void) +/* DNS-323 rev. A specific power off method */ +static void dns323a_power_off(void) { pr_info("%s: triggering power-off...\n", __func__); gpio_set_value(DNS323_GPIO_POWER_OFF, 1); } +/* DNS-323 rev B specific power off method */ +static void dns323b_power_off(void) +{ + pr_info("%s: triggering power-off...\n", __func__); + /* Pin has to be changed to 1 and back to 0 to do actual power off. */ + gpio_set_value(DNS323_GPIO_POWER_OFF, 1); + mdelay(100); + gpio_set_value(DNS323_GPIO_POWER_OFF, 0); +} + static void __init dns323_init(void) { /* Setup basic Orion functions. Need to be called early. */ @@ -400,6 +434,14 @@ static void __init dns323_init(void) orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); platform_device_register(&dns323_nor_flash); + /* The 5181 power LED is active low and requires + * DNS323_GPIO_LED_POWER1 to also be low. + */ + if (dns323_dev_id() == MV88F5181_DEV_ID) { + dns323_leds[0].active_low = 1; + gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); + } + platform_device_register(&dns323_gpio_leds); platform_device_register(&dns323_button_device); @@ -424,11 +466,20 @@ static void __init dns323_init(void) if (dns323_dev_id() == MV88F5182_DEV_ID) orion5x_sata_init(&dns323_sata_data); - /* register dns323 specific power-off method */ + /* The 5182 has flag to indicate the system is up. Without this flag + * set, power LED will flash and cannot be controlled via leds-gpio. + */ + if (dns323_dev_id() == MV88F5182_DEV_ID) + gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1); + + /* Register dns323 specific power-off method */ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) pr_err("DNS323: failed to setup power-off GPIO\n"); - pm_power_off = dns323_power_off; + if (dns323_dev_id() == MV88F5182_DEV_ID) + pm_power_off = dns323b_power_off; + else + pm_power_off = dns323a_power_off; } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S index c7f808bfe27..91e0e39bb23 100644 --- a/arch/arm/mach-orion5x/include/mach/debug-macro.S +++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S @@ -10,7 +10,7 @@ #include <mach/orion5x.h> - .macro addruart,rx + .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? ldreq \rx, =ORION5X_REGS_PHYS_BASE diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h index 7147a297e97..06b50aeff7b 100644 --- a/arch/arm/mach-orion5x/include/mach/vmalloc.h +++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h @@ -2,4 +2,4 @@ * arch/arm/mach-orion5x/include/mach/vmalloc.h */ -#define VMALLOC_END 0xfd800000 +#define VMALLOC_END 0xfd800000UL diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c new file mode 100644 index 00000000000..8e569be6e2c --- /dev/null +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -0,0 +1,276 @@ +/* + * arch/arm/mach-orion5x/ls_hgl-setup.c + * + * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/ata_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system.h> +#include <mach/orion5x.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * Linkstation LS-HGL Info + ****************************************************************************/ + +/* + * 256K NOR flash Device bus boot chip select + */ + +#define LS_HGL_NOR_BOOT_BASE 0xf4000000 +#define LS_HGL_NOR_BOOT_SIZE SZ_256K + +/***************************************************************************** + * 256KB NOR Flash on BOOT Device + ****************************************************************************/ + +static struct physmap_flash_data ls_hgl_nor_flash_data = { + .width = 1, +}; + +static struct resource ls_hgl_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = LS_HGL_NOR_BOOT_BASE, + .end = LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device ls_hgl_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ls_hgl_nor_flash_data, + }, + .num_resources = 1, + .resource = &ls_hgl_nor_flash_resource, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data ls_hgl_eth_data = { + .phy_addr = 8, +}; + +/***************************************************************************** + * RTC 5C372a on I2C bus + ****************************************************************************/ + +static struct i2c_board_info __initdata ls_hgl_i2c_rtc = { + I2C_BOARD_INFO("rs5c372a", 0x32), +}; + +/***************************************************************************** + * LEDs attached to GPIO + ****************************************************************************/ + +#define LS_HGL_GPIO_LED_ALARM 2 +#define LS_HGL_GPIO_LED_INFO 3 +#define LS_HGL_GPIO_LED_FUNC 17 +#define LS_HGL_GPIO_LED_PWR 0 + + +static struct gpio_led ls_hgl_led_pins[] = { + { + .name = "alarm:red", + .gpio = LS_HGL_GPIO_LED_ALARM, + .active_low = 1, + }, { + .name = "info:amber", + .gpio = LS_HGL_GPIO_LED_INFO, + .active_low = 1, + }, { + .name = "func:blue:top", + .gpio = LS_HGL_GPIO_LED_FUNC, + .active_low = 1, + }, { + .name = "power:blue:bottom", + .gpio = LS_HGL_GPIO_LED_PWR, + }, +}; + +static struct gpio_led_platform_data ls_hgl_led_data = { + .leds = ls_hgl_led_pins, + .num_leds = ARRAY_SIZE(ls_hgl_led_pins), +}; + +static struct platform_device ls_hgl_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ls_hgl_led_data, + }, +}; + +/**************************************************************************** + * GPIO Attached Keys + ****************************************************************************/ +#define LS_HGL_GPIO_KEY_FUNC 15 +#define LS_HGL_GPIO_KEY_POWER 8 +#define LS_HGL_GPIO_KEY_AUTOPOWER 10 + +#define LS_HGL_SW_POWER 0x00 +#define LS_HGL_SW_AUTOPOWER 0x01 + +static struct gpio_keys_button ls_hgl_buttons[] = { + { + .code = KEY_OPTION, + .gpio = LS_HGL_GPIO_KEY_FUNC, + .desc = "Function Button", + .active_low = 1, + }, { + .type = EV_SW, + .code = LS_HGL_SW_POWER, + .gpio = LS_HGL_GPIO_KEY_POWER, + .desc = "Power-on Switch", + .active_low = 1, + }, { + .type = EV_SW, + .code = LS_HGL_SW_AUTOPOWER, + .gpio = LS_HGL_GPIO_KEY_AUTOPOWER, + .desc = "Power-auto Switch", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data ls_hgl_button_data = { + .buttons = ls_hgl_buttons, + .nbuttons = ARRAY_SIZE(ls_hgl_buttons), +}; + +static struct platform_device ls_hgl_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ls_hgl_button_data, + }, +}; + + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data ls_hgl_sata_data = { + .n_ports = 2, +}; + + +/***************************************************************************** + * Linkstation LS-HGL specific power off method: reboot + ****************************************************************************/ +/* + * On the Linkstation LS-HGL, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + */ + +static void ls_hgl_power_off(void) +{ + arm_machine_restart('h', NULL); +} + + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +#define LS_HGL_GPIO_USB_POWER 9 +#define LS_HGL_GPIO_AUTO_POWER 10 +#define LS_HGL_GPIO_POWER 8 + +#define LS_HGL_GPIO_HDD_POWER 1 + +static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* LED_PWR */ + { 1, MPP_GPIO }, /* HDD_PWR */ + { 2, MPP_GPIO }, /* LED_ALARM */ + { 3, MPP_GPIO }, /* LED_INFO */ + { 4, MPP_UNUSED }, + { 5, MPP_UNUSED }, + { 6, MPP_GPIO }, /* FAN_LCK */ + { 7, MPP_GPIO }, /* INIT */ + { 8, MPP_GPIO }, /* POWER */ + { 9, MPP_GPIO }, /* USB_PWR */ + { 10, MPP_GPIO }, /* AUTO_POWER */ + { 11, MPP_UNUSED }, /* LED_ETH (dummy) */ + { 12, MPP_UNUSED }, + { 13, MPP_UNUSED }, + { 14, MPP_UNUSED }, + { 15, MPP_GPIO }, /* FUNC */ + { 16, MPP_UNUSED }, + { 17, MPP_GPIO }, /* LED_FUNC */ + { 18, MPP_UNUSED }, + { 19, MPP_UNUSED }, + { -1 }, +}; + +static void __init ls_hgl_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(ls_hgl_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_ehci1_init(); + orion5x_eth_init(&ls_hgl_eth_data); + orion5x_i2c_init(); + orion5x_sata_init(&ls_hgl_sata_data); + orion5x_uart0_init(); + orion5x_xor_init(); + + orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE, + LS_HGL_NOR_BOOT_SIZE); + platform_device_register(&ls_hgl_nor_flash); + + platform_device_register(&ls_hgl_button_device); + + platform_device_register(&ls_hgl_leds); + + i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1); + + /* enable USB power */ + gpio_set_value(LS_HGL_GPIO_USB_POWER, 1); + + /* register power-off method */ + pm_power_off = ls_hgl_power_off; + + pr_info("%s: finished\n", __func__); +} + +MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") + /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = ls_hgl_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index c9bf6b81a80..c704f056de1 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/pci.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/leds.h> @@ -19,12 +18,13 @@ #include <linux/input.h> #include <linux/i2c.h> #include <linux/ata_platform.h> -#include <asm/mach-types.h> #include <linux/gpio.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/system.h> +#include <mach/orion5x.h> #include "common.h" #include "mpp.h" -#include "include/mach/system.h" /***************************************************************************** * Linkstation Mini Info @@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = { static void lsmini_power_off(void) { - arch_reset(0, NULL); + arm_machine_restart('h', NULL); } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index bdf96eb523b..e8706f15a67 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/slab.h> #include <linux/mbus.h> #include <asm/irq.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 1b4ad9d5e2e..f9f222ebb7e 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -15,6 +15,9 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> @@ -24,6 +27,80 @@ #include "common.h" #include "mpp.h" +/* + * LEDs attached to GPIO + */ +static struct gpio_led wrt350n_v2_led_pins[] = { + { + .name = "wrt350nv2:green:power", + .gpio = 0, + .active_low = 1, + }, { + .name = "wrt350nv2:green:security", + .gpio = 1, + .active_low = 1, + }, { + .name = "wrt350nv2:orange:power", + .gpio = 5, + .active_low = 1, + }, { + .name = "wrt350nv2:green:usb", + .gpio = 6, + .active_low = 1, + }, { + .name = "wrt350nv2:green:wireless", + .gpio = 7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data wrt350n_v2_led_data = { + .leds = wrt350n_v2_led_pins, + .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins), +}; + +static struct platform_device wrt350n_v2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wrt350n_v2_led_data, + }, +}; + +/* + * Buttons attached to GPIO + */ +static struct gpio_keys_button wrt350n_v2_buttons[] = { + { + .code = KEY_RESTART, + .gpio = 3, + .desc = "Reset Button", + .active_low = 1, + }, { + .code = KEY_WPS_BUTTON, + .gpio = 2, + .desc = "WPS Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data wrt350n_v2_button_data = { + .buttons = wrt350n_v2_buttons, + .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons), +}; + +static struct platform_device wrt350n_v2_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &wrt350n_v2_button_data, + }, +}; + +/* + * General setup + */ static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = { { 0, MPP_GPIO }, /* Power LED green (0=on) */ { 1, MPP_GPIO }, /* Security LED (0=on) */ @@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void) orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, WRT350N_V2_NOR_BOOT_SIZE); platform_device_register(&wrt350n_v2_nor_flash); + platform_device_register(&wrt350n_v2_leds); + platform_device_register(&wrt350n_v2_button_device); } static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |