diff options
Diffstat (limited to 'arch/arm/mach-pnx4008')
27 files changed, 0 insertions, 4686 deletions
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile deleted file mode 100644 index 777564c90a1..00000000000 --- a/arch/arm/mach-pnx4008/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o -obj-m := -obj-n := -obj- := - -# Power Management -obj-$(CONFIG_PM) += pm.o sleep.o - diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot deleted file mode 100644 index 9fa19baa7f2..00000000000 --- a/arch/arm/mach-pnx4008/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 - diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c deleted file mode 100644 index a4a3819c96c..00000000000 --- a/arch/arm/mach-pnx4008/clock.c +++ /dev/null @@ -1,1001 +0,0 @@ -/* - * arch/arm/mach-pnx4008/clock.c - * - * Clock control driver for PNX4008 - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * Generic clock management functions are partially based on: - * linux/arch/arm/mach-omap/clock.c - * - * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/clock.h> -#include "clock.h" - -/*forward declaration*/ -static struct clk per_ck; -static struct clk hclk_ck; -static struct clk ck_1MHz; -static struct clk ck_13MHz; -static struct clk ck_pll1; -static int local_set_rate(struct clk *clk, u32 rate); - -static inline void clock_lock(void) -{ - local_irq_disable(); -} - -static inline void clock_unlock(void) -{ - local_irq_enable(); -} - -static void propagate_rate(struct clk *clk) -{ - struct clk *tmp_clk; - - tmp_clk = clk; - while (tmp_clk->propagate_next) { - tmp_clk = tmp_clk->propagate_next; - local_set_rate(tmp_clk, tmp_clk->user_rate); - } -} - -static void clk_reg_disable(struct clk *clk) -{ - if (clk->enable_reg) - __raw_writel(__raw_readl(clk->enable_reg) & - ~(1 << clk->enable_shift), clk->enable_reg); -} - -static int clk_reg_enable(struct clk *clk) -{ - if (clk->enable_reg) - __raw_writel(__raw_readl(clk->enable_reg) | - (1 << clk->enable_shift), clk->enable_reg); - return 0; -} - -static inline void clk_reg_disable1(struct clk *clk) -{ - if (clk->enable_reg1) - __raw_writel(__raw_readl(clk->enable_reg1) & - ~(1 << clk->enable_shift1), clk->enable_reg1); -} - -static inline void clk_reg_enable1(struct clk *clk) -{ - if (clk->enable_reg1) - __raw_writel(__raw_readl(clk->enable_reg1) | - (1 << clk->enable_shift1), clk->enable_reg1); -} - -static int clk_wait_for_pll_lock(struct clk *clk) -{ - int i; - i = 0; - while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ; /*wait for PLL to lock */ - - if (!(__raw_readl(clk->scale_reg) & 1)) { - printk(KERN_ERR - "%s ERROR: failed to lock, scale reg data: %x\n", - clk->name, __raw_readl(clk->scale_reg)); - return -1; - } - return 0; -} - -static int switch_to_dirty_13mhz(struct clk *clk) -{ - int i; - int ret; - u32 tmp_reg; - - ret = 0; - - if (!clk->rate) - clk_reg_enable1(clk); - - tmp_reg = __raw_readl(clk->parent_switch_reg); - /*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */ - if (!(tmp_reg & 1)) { - tmp_reg |= (1 << 1); /* Trigger switch to 13'MHz (dirty) clock */ - __raw_writel(tmp_reg, clk->parent_switch_reg); - i = 0; - while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13'MHz selection status */ - - if (!(__raw_readl(clk->parent_switch_reg) & 1)) { - printk(KERN_ERR - "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n", - clk->name, __raw_readl(clk->parent_switch_reg)); - ret = -1; - } - } - - if (!clk->rate) - clk_reg_disable1(clk); - - return ret; -} - -static int switch_to_clean_13mhz(struct clk *clk) -{ - int i; - int ret; - u32 tmp_reg; - - ret = 0; - - if (!clk->rate) - clk_reg_enable1(clk); - - tmp_reg = __raw_readl(clk->parent_switch_reg); - /*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */ - if (tmp_reg & 1) { - tmp_reg &= ~(1 << 1); /* Trigger switch to 13MHz (clean) clock */ - __raw_writel(tmp_reg, clk->parent_switch_reg); - i = 0; - while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13MHz selection status */ - - if (__raw_readl(clk->parent_switch_reg) & 1) { - printk(KERN_ERR - "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n", - clk->name, __raw_readl(clk->parent_switch_reg)); - ret = -1; - } - } - - if (!clk->rate) - clk_reg_disable1(clk); - - return ret; -} - -static int set_13MHz_parent(struct clk *clk, struct clk *parent) -{ - int ret = -EINVAL; - - if (parent == &ck_13MHz) - ret = switch_to_clean_13mhz(clk); - else if (parent == &ck_pll1) - ret = switch_to_dirty_13mhz(clk); - - return ret; -} - -#define PLL160_MIN_FCCO 156000 -#define PLL160_MAX_FCCO 320000 - -/* - * Calculate pll160 settings. - * Possible input: up to 320MHz with step of clk->parent->rate. - * In PNX4008 parent rate for pll160s may be either 1 or 13MHz. - * Ignored paths: "feedback" (bit 13 set), "div-by-N". - * Setting ARM PLL4 rate to 0 will put CPU into direct run mode. - * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input. - * Please refer to PNX4008 IC manual for details. - */ - -static int pll160_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp_reg, tmp_m, tmp_2p, i; - u32 parent_rate; - int ret = -EINVAL; - - parent_rate = clk->parent->rate; - - if (!parent_rate) - goto out; - - /* set direct run for ARM or disable output for others */ - clk_reg_disable(clk); - - /* disable source input as well (ignored for ARM) */ - clk_reg_disable1(clk); - - tmp_reg = __raw_readl(clk->scale_reg); - tmp_reg &= ~0x1ffff; /*clear all settings, power down */ - __raw_writel(tmp_reg, clk->scale_reg); - - rate -= rate % parent_rate; /*round down the input */ - - if (rate > PLL160_MAX_FCCO) - rate = PLL160_MAX_FCCO; - - if (!rate) { - clk->rate = 0; - ret = 0; - goto out; - } - - clk_reg_enable1(clk); - tmp_reg = __raw_readl(clk->scale_reg); - - if (rate == parent_rate) { - /*enter direct bypass mode */ - tmp_reg |= ((1 << 14) | (1 << 15)); - __raw_writel(tmp_reg, clk->scale_reg); - clk->rate = parent_rate; - clk_reg_enable(clk); - ret = 0; - goto out; - } - - i = 0; - for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) { - if (rate * tmp_2p >= PLL160_MIN_FCCO) - break; - i++; - } - - if (tmp_2p > 1) - tmp_reg |= ((i - 1) << 11); - else - tmp_reg |= (1 << 14); /*direct mode, no divide */ - - tmp_m = rate * tmp_2p; - tmp_m /= parent_rate; - - tmp_reg |= (tmp_m - 1) << 1; /*calculate M */ - tmp_reg |= (1 << 16); /*power up PLL */ - __raw_writel(tmp_reg, clk->scale_reg); - - if (clk_wait_for_pll_lock(clk) < 0) { - clk_reg_disable(clk); - clk_reg_disable1(clk); - - tmp_reg = __raw_readl(clk->scale_reg); - tmp_reg &= ~0x1ffff; /*clear all settings, power down */ - __raw_writel(tmp_reg, clk->scale_reg); - clk->rate = 0; - ret = -EFAULT; - goto out; - } - - clk->rate = (tmp_m * parent_rate) / tmp_2p; - - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); - - clk_reg_enable(clk); - ret = 0; - -out: - return ret; -} - -/*configure PER_CLK*/ -static int per_clk_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp; - - tmp = __raw_readl(clk->scale_reg); - tmp &= ~(0x1f << 2); - tmp |= ((clk->parent->rate / clk->rate) - 1) << 2; - __raw_writel(tmp, clk->scale_reg); - clk->rate = rate; - return 0; -} - -/*configure HCLK*/ -static int hclk_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp; - tmp = __raw_readl(clk->scale_reg); - tmp = tmp & ~0x3; - switch (rate) { - case 1: - break; - case 2: - tmp |= 1; - break; - case 4: - tmp |= 2; - break; - } - - __raw_writel(tmp, clk->scale_reg); - clk->rate = rate; - return 0; -} - -static u32 hclk_round_rate(struct clk *clk, u32 rate) -{ - switch (rate) { - case 1: - case 4: - return rate; - } - return 2; -} - -static u32 per_clk_round_rate(struct clk *clk, u32 rate) -{ - return CLK_RATE_13MHZ; -} - -static int on_off_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_enable(clk); - clk->rate = 1; - } else { - clk_reg_disable(clk); - clk->rate = 0; - } - return 0; -} - -static int on_off_inv_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - clk->rate = 1; - } else { - clk_reg_enable(clk); - clk->rate = 0; - } - return 0; -} - -static u32 on_off_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? 1 : 0); -} - -static u32 pll4_round_rate(struct clk *clk, u32 rate) -{ - if (rate > CLK_RATE_208MHZ) - rate = CLK_RATE_208MHZ; - if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1) - rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ; - return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ))); -} - -static u32 pll3_round_rate(struct clk *clk, u32 rate) -{ - if (rate > CLK_RATE_208MHZ) - rate = CLK_RATE_208MHZ; - return (rate - rate % CLK_RATE_13MHZ); -} - -static u32 pll5_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? CLK_RATE_48MHZ : 0); -} - -static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? CLK_RATE_13MHZ : 0); -} - -static int ck_13MHz_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - udelay(500); - clk->rate = CLK_RATE_13MHZ; - ck_1MHz.rate = CLK_RATE_1MHZ; - } else { - clk_reg_enable(clk); - clk->rate = 0; - ck_1MHz.rate = 0; - } - return 0; -} - -static int pll1_set_rate(struct clk *clk, u32 rate) -{ -#if 0 /* doesn't work on some boards, probably a HW BUG */ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - if (!clk_wait_for_pll_lock(clk)) { - clk->rate = CLK_RATE_13MHZ; - } else { - clk_reg_enable(clk); - clk->rate = 0; - } - - } else { - clk_reg_enable(clk); - clk->rate = 0; - } -#endif - return 0; -} - -/* Clock sources */ - -static struct clk osc_13MHz = { - .name = "osc_13MHz", - .flags = FIXED_RATE, - .rate = CLK_RATE_13MHZ, -}; - -static struct clk ck_13MHz = { - .name = "ck_13MHz", - .parent = &osc_13MHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &ck_13MHz_round_rate, - .set_rate = &ck_13MHz_set_rate, - .enable_reg = OSC13CTRL_REG, - .enable_shift = 0, - .rate = CLK_RATE_13MHZ, -}; - -static struct clk osc_32KHz = { - .name = "osc_32KHz", - .flags = FIXED_RATE, - .rate = CLK_RATE_32KHZ, -}; - -/*attached to PLL5*/ -static struct clk ck_1MHz = { - .name = "ck_1MHz", - .flags = FIXED_RATE | PARENT_SET_RATE, - .parent = &ck_13MHz, -}; - -/* PLL1 (397) - provides 13' MHz clock */ -static struct clk ck_pll1 = { - .name = "ck_pll1", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &ck_13MHz_round_rate, - .set_rate = &pll1_set_rate, - .enable_reg = PLLCTRL_REG, - .enable_shift = 1, - .scale_reg = PLLCTRL_REG, - .rate = CLK_RATE_13MHZ, -}; - -/* CPU/Bus PLL */ -static struct clk ck_pll4 = { - .name = "ck_pll4", - .parent = &ck_pll1, - .flags = RATE_PROPAGATES | NEEDS_INITIALIZATION, - .propagate_next = &per_ck, - .round_rate = &pll4_round_rate, - .set_rate = &pll160_set_rate, - .rate = CLK_RATE_208MHZ, - .scale_reg = HCLKPLLCTRL_REG, - .enable_reg = PWRCTRL_REG, - .enable_shift = 2, - .parent_switch_reg = SYSCLKCTRL_REG, - .set_parent = &set_13MHz_parent, -}; - -/* USB PLL */ -static struct clk ck_pll5 = { - .name = "ck_pll5", - .parent = &ck_1MHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &pll5_round_rate, - .set_rate = &pll160_set_rate, - .scale_reg = USBCTRL_REG, - .enable_reg = USBCTRL_REG, - .enable_shift = 18, - .enable_reg1 = USBCTRL_REG, - .enable_shift1 = 17, -}; - -/* XPERTTeak DSP PLL */ -static struct clk ck_pll3 = { - .name = "ck_pll3", - .parent = &ck_pll1, - .flags = NEEDS_INITIALIZATION, - .round_rate = &pll3_round_rate, - .set_rate = &pll160_set_rate, - .scale_reg = DSPPLLCTRL_REG, - .enable_reg = DSPCLKCTRL_REG, - .enable_shift = 3, - .enable_reg1 = DSPCLKCTRL_REG, - .enable_shift1 = 2, - .parent_switch_reg = DSPCLKCTRL_REG, - .set_parent = &set_13MHz_parent, -}; - -static struct clk hclk_ck = { - .name = "hclk_ck", - .parent = &ck_pll4, - .flags = PARENT_SET_RATE, - .set_rate = &hclk_set_rate, - .round_rate = &hclk_round_rate, - .scale_reg = HCLKDIVCTRL_REG, - .rate = 2, - .user_rate = 2, -}; - -static struct clk per_ck = { - .name = "per_ck", - .parent = &ck_pll4, - .flags = FIXED_RATE, - .propagate_next = &hclk_ck, - .set_rate = &per_clk_set_rate, - .round_rate = &per_clk_round_rate, - .scale_reg = HCLKDIVCTRL_REG, - .rate = CLK_RATE_13MHZ, - .user_rate = CLK_RATE_13MHZ, -}; - -static struct clk m2hclk_ck = { - .name = "m2hclk_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_inv_set_rate, - .rate = 1, - .enable_shift = 6, - .enable_reg = PWRCTRL_REG, -}; - -static struct clk vfp9_ck = { - .name = "vfp9_ck", - .parent = &ck_pll4, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 4, - .enable_reg = VFP9CLKCTRL_REG, -}; - -static struct clk keyscan_ck = { - .name = "keyscan_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = KEYCLKCTRL_REG, -}; - -static struct clk touch_ck = { - .name = "touch_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = TSCLKCTRL_REG, -}; - -static struct clk pwm1_ck = { - .name = "pwm1_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = PWMCLKCTRL_REG, -}; - -static struct clk pwm2_ck = { - .name = "pwm2_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 2, - .enable_reg = PWMCLKCTRL_REG, -}; - -static struct clk jpeg_ck = { - .name = "jpeg_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = JPEGCLKCTRL_REG, -}; - -static struct clk ms_ck = { - .name = "ms_ck", - .parent = &ck_pll4, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 5, - .enable_reg = MSCTRL_REG, -}; - -static struct clk dum_ck = { - .name = "dum_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = DUMCLKCTRL_REG, -}; - -static struct clk flash_ck = { - .name = "flash_ck", - .parent = &hclk_ck, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 1, /* Only MLC clock supported */ - .enable_reg = FLASHCLKCTRL_REG, -}; - -static struct clk i2c0_ck = { - .name = "i2c0_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 0, - .enable_reg = I2CCLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk i2c1_ck = { - .name = "i2c1_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 1, - .enable_reg = I2CCLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk i2c2_ck = { - .name = "i2c2_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 2, - .enable_reg = USB_OTG_CLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk spi0_ck = { - .name = "spi0_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = SPICTRL_REG, -}; - -static struct clk spi1_ck = { - .name = "spi1_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 4, - .enable_reg = SPICTRL_REG, -}; - -static struct clk dma_ck = { - .name = "dma_ck", - .parent = &hclk_ck, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = DMACLKCTRL_REG, -}; - -static struct clk uart3_ck = { - .name = "uart3_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 0, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart4_ck = { - .name = "uart4_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 1, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart5_ck = { - .name = "uart5_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 2, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart6_ck = { - .name = "uart6_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 3, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk wdt_ck = { - .name = "wdt_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .enable_shift = 0, - .enable_reg = TIMCLKCTRL_REG, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -/* These clocks are visible outside this module - * and can be initialized - */ -static struct clk *onchip_clks[] __initdata = { - &ck_13MHz, - &ck_pll1, - &ck_pll4, - &ck_pll5, - &ck_pll3, - &vfp9_ck, - &m2hclk_ck, - &hclk_ck, - &dma_ck, - &flash_ck, - &dum_ck, - &keyscan_ck, - &pwm1_ck, - &pwm2_ck, - &jpeg_ck, - &ms_ck, - &touch_ck, - &i2c0_ck, - &i2c1_ck, - &i2c2_ck, - &spi0_ck, - &spi1_ck, - &uart3_ck, - &uart4_ck, - &uart5_ck, - &uart6_ck, - &wdt_ck, -}; - -static struct clk_lookup onchip_clkreg[] = { - { .clk = &ck_13MHz, .con_id = "ck_13MHz" }, - { .clk = &ck_pll1, .con_id = "ck_pll1" }, - { .clk = &ck_pll4, .con_id = "ck_pll4" }, - { .clk = &ck_pll5, .con_id = "ck_pll5" }, - { .clk = &ck_pll3, .con_id = "ck_pll3" }, - { .clk = &vfp9_ck, .con_id = "vfp9_ck" }, - { .clk = &m2hclk_ck, .con_id = "m2hclk_ck" }, - { .clk = &hclk_ck, .con_id = "hclk_ck" }, - { .clk = &dma_ck, .con_id = "dma_ck" }, - { .clk = &flash_ck, .con_id = "flash_ck" }, - { .clk = &dum_ck, .con_id = "dum_ck" }, - { .clk = &keyscan_ck, .con_id = "keyscan_ck" }, - { .clk = &pwm1_ck, .con_id = "pwm1_ck" }, - { .clk = &pwm2_ck, .con_id = "pwm2_ck" }, - { .clk = &jpeg_ck, .con_id = "jpeg_ck" }, - { .clk = &ms_ck, .con_id = "ms_ck" }, - { .clk = &touch_ck, .con_id = "touch_ck" }, - { .clk = &i2c0_ck, .dev_id = "pnx-i2c.0" }, - { .clk = &i2c1_ck, .dev_id = "pnx-i2c.1" }, - { .clk = &i2c2_ck, .dev_id = "pnx-i2c.2" }, - { .clk = &spi0_ck, .con_id = "spi0_ck" }, - { .clk = &spi1_ck, .con_id = "spi1_ck" }, - { .clk = &uart3_ck, .con_id = "uart3_ck" }, - { .clk = &uart4_ck, .con_id = "uart4_ck" }, - { .clk = &uart5_ck, .con_id = "uart5_ck" }, - { .clk = &uart6_ck, .con_id = "uart6_ck" }, - { .clk = &wdt_ck, .dev_id = "pnx4008-watchdog" }, -}; - -static void local_clk_disable(struct clk *clk) -{ - if (WARN_ON(clk->usecount == 0)) - return; - - if (!(--clk->usecount)) { - if (clk->disable) - clk->disable(clk); - else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) - clk->set_rate(clk, 0); - if (clk->parent) - local_clk_disable(clk->parent); - } -} - -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (clk->usecount == 0) { - if (clk->parent) { - ret = local_clk_enable(clk->parent); - if (ret != 0) - goto out; - } - - if (clk->enable) - ret = clk->enable(clk); - else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate - && clk->user_rate) - ret = clk->set_rate(clk, clk->user_rate); - - if (ret != 0 && clk->parent) { - local_clk_disable(clk->parent); - goto out; - } - - clk->usecount++; - } -out: - return ret; -} - -static int local_set_rate(struct clk *clk, u32 rate) -{ - int ret = -EINVAL; - if (clk->set_rate) { - - if (clk->user_rate == clk->rate && clk->parent->rate) { - /* if clock enabled or rate not set */ - clk->user_rate = clk->round_rate(clk, rate); - ret = clk->set_rate(clk, clk->user_rate); - } else - clk->user_rate = clk->round_rate(clk, rate); - ret = 0; - } - return ret; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (clk->flags & FIXED_RATE) - goto out; - - clock_lock(); - if ((clk->flags & PARENT_SET_RATE) && clk->parent) { - - clk->user_rate = clk->round_rate(clk, rate); - /* parent clock needs to be refreshed - for the setting to take effect */ - } else { - ret = local_set_rate(clk, rate); - } - ret = 0; - clock_unlock(); - -out: - return ret; -} - -EXPORT_SYMBOL(clk_set_rate); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long ret; - clock_lock(); - ret = clk->rate; - clock_unlock(); - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -int clk_enable(struct clk *clk) -{ - int ret; - - clock_lock(); - ret = local_clk_enable(clk); - clock_unlock(); - return ret; -} - -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - clock_lock(); - local_clk_disable(clk); - clock_unlock(); -} - -EXPORT_SYMBOL(clk_disable); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - long ret; - clock_lock(); - if (clk->round_rate) - ret = clk->round_rate(clk, rate); - else - ret = clk->rate; - clock_unlock(); - return ret; -} - -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = -ENODEV; - if (!clk->set_parent) - goto out; - - clock_lock(); - ret = clk->set_parent(clk, parent); - if (!ret) - clk->parent = parent; - clock_unlock(); - -out: - return ret; -} - -EXPORT_SYMBOL(clk_set_parent); - -static int __init clk_init(void) -{ - struct clk **clkp; - - /* Disable autoclocking, as it doesn't seem to work */ - __raw_writel(0xff, AUTOCLK_CTRL); - - for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); - clkp++) { - struct clk *clk = *clkp; - if (clk->flags & NEEDS_INITIALIZATION) { - if (clk->set_rate) { - clk->user_rate = clk->rate; - local_set_rate(clk, clk->user_rate); - if (clk->set_parent) - clk->set_parent(clk, clk->parent); - } - if (clk->enable && clk->usecount) - clk->enable(clk); - if (clk->disable && !clk->usecount) - clk->disable(clk); - } - pr_debug("%s: clock %s, rate %ld\n", - __func__, clk->name, clk->rate); - } - - local_clk_enable(&ck_pll4); - - /* if ck_13MHz is not used, disable it. */ - if (ck_13MHz.usecount == 0) - local_clk_disable(&ck_13MHz); - - /* Disable autoclocking */ - __raw_writeb(0xff, AUTOCLK_CTRL); - - clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg)); - - return 0; -} - -arch_initcall(clk_init); diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h deleted file mode 100644 index 39720d6c0d0..00000000000 --- a/arch/arm/mach-pnx4008/clock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-pnx4008/clock.h - * - * Clock control driver for PNX4008 - internal header file - * - * Author: Vitaly Wool <source@mvista.com> - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ARCH_ARM_PNX4008_CLOCK_H__ -#define __ARCH_ARM_PNX4008_CLOCK_H__ - -struct clk { - const char *name; - struct clk *parent; - struct clk *propagate_next; - u32 rate; - u32 user_rate; - s8 usecount; - u32 flags; - u32 scale_reg; - u8 enable_shift; - u32 enable_reg; - u8 enable_shift1; - u32 enable_reg1; - u32 parent_switch_reg; - u32(*round_rate) (struct clk *, u32); - int (*set_rate) (struct clk *, u32); - int (*set_parent) (struct clk * clk, struct clk * parent); - int (*enable)(struct clk *); - void (*disable)(struct clk *); -}; - -/* Flags */ -#define RATE_PROPAGATES (1<<0) -#define NEEDS_INITIALIZATION (1<<1) -#define PARENT_SET_RATE (1<<2) -#define FIXED_RATE (1<<3) - -#endif diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c deleted file mode 100644 index a00d2f1254e..00000000000 --- a/arch/arm/mach-pnx4008/core.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * arch/arm/mach-pnx4008/core.c - * - * PNX4008 core startup code - * - * Authors: Vitaly Wool, Dmitry Chigirev, - * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/system_misc.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include <mach/irq.h> -#include <mach/clock.h> -#include <mach/dma.h> - -struct resource spipnx_0_resources[] = { - { - .start = PNX4008_SPI1_BASE, - .end = PNX4008_SPI1_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, { - .start = PER_SPI1_REC_XMIT, - .flags = IORESOURCE_DMA, - }, { - .start = SPI1_INT, - .flags = IORESOURCE_IRQ, - }, { - .flags = 0, - }, -}; - -struct resource spipnx_1_resources[] = { - { - .start = PNX4008_SPI2_BASE, - .end = PNX4008_SPI2_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, { - .start = PER_SPI2_REC_XMIT, - .flags = IORESOURCE_DMA, - }, { - .start = SPI2_INT, - .flags = IORESOURCE_IRQ, - }, { - .flags = 0, - } -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -static struct platform_device spipnx_1 = { - .name = "spipnx", - .id = 1, - .num_resources = ARRAY_SIZE(spipnx_0_resources), - .resource = spipnx_0_resources, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -static struct platform_device spipnx_2 = { - .name = "spipnx", - .id = 2, - .num_resources = ARRAY_SIZE(spipnx_1_resources), - .resource = spipnx_1_resources, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -static struct plat_serial8250_port platform_serial_ports[] = { - { - .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)), - .mapbase = (unsigned long)PNX4008_UART5_BASE, - .irq = IIR5_INT, - .uartclk = PNX4008_UART_CLK, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST, - }, - { - .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)), - .mapbase = (unsigned long)PNX4008_UART3_BASE, - .irq = IIR3_INT, - .uartclk = PNX4008_UART_CLK, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST, - }, - {} -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = &platform_serial_ports, - }, -}; - -static struct platform_device nand_flash_device = { - .name = "pnx4008-flash", - .id = -1, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32) 0; - -static struct resource ohci_resources[] = { - { - .start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE), - .end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100), - .flags = IORESOURCE_MEM, - }, { - .start = USB_HOST_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "pnx4008-usb-ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static struct platform_device sdum_device = { - .name = "pnx4008-sdum", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device rgbfb_device = { - .name = "pnx4008-rgbfb", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - } -}; - -struct resource watchdog_resources[] = { - { - .start = PNX4008_WDOG_BASE, - .end = PNX4008_WDOG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device watchdog_device = { - .name = "pnx4008-watchdog", - .id = -1, - .num_resources = ARRAY_SIZE(watchdog_resources), - .resource = watchdog_resources, -}; - -static struct platform_device *devices[] __initdata = { - &spipnx_1, - &spipnx_2, - &serial_device, - &ohci_device, - &nand_flash_device, - &sdum_device, - &rgbfb_device, - &watchdog_device, -}; - - -extern void pnx4008_uart_init(void); - -static void __init pnx4008_init(void) -{ - /*disable all START interrupt sources, - and clear all START interrupt flags */ - __raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT)); - __raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT)); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - /* Switch on the UART clocks */ - pnx4008_uart_init(); -} - -static struct map_desc pnx4008_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(PNX4008_IRAM_BASE), - .pfn = __phys_to_pfn(PNX4008_IRAM_BASE), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_NDF_FLASH_BASE), - .pfn = __phys_to_pfn(PNX4008_NDF_FLASH_BASE), - .length = SZ_1M - SZ_128K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE), - .pfn = __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE), - .length = SZ_128K * 3, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_DMA_CONFIG_BASE), - .pfn = __phys_to_pfn(PNX4008_DMA_CONFIG_BASE), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_AHB2FAB_BASE), - .pfn = __phys_to_pfn(PNX4008_AHB2FAB_BASE), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -void __init pnx4008_map_io(void) -{ - iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc)); -} - -static void pnx4008_restart(char mode, const char *cmd) -{ - soft_restart(0); -} - -#ifdef CONFIG_PM -extern int pnx4008_pm_init(void); -#else -static inline int pnx4008_pm_init(void) { return 0; } -#endif - -void __init pnx4008_init_late(void) -{ - pnx4008_pm_init(); -} - -extern struct sys_timer pnx4008_timer; - -MACHINE_START(PNX4008, "Philips PNX4008") - /* Maintainer: MontaVista Software Inc. */ - .atag_offset = 0x100, - .map_io = pnx4008_map_io, - .init_irq = pnx4008_init_irq, - .init_machine = pnx4008_init, - .init_late = pnx4008_init_late, - .timer = &pnx4008_timer, - .restart = pnx4008_restart, -MACHINE_END diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c deleted file mode 100644 index a4739e9fb2f..00000000000 --- a/arch/arm/mach-pnx4008/dma.c +++ /dev/null @@ -1,1105 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/dma.c - * - * PNX4008 DMA registration and IRQ dispatching - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * Based on the code from Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/dma-mapping.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gfp.h> - -#include <mach/hardware.h> -#include <mach/dma.h> -#include <asm/dma-mapping.h> -#include <mach/clock.h> - -static struct dma_channel { - char *name; - void (*irq_handler) (int, int, void *); - void *data; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - void *target_addr; - int target_id; -} dma_channels[MAX_DMA_CHANNELS]; - -static struct ll_pool { - void *vaddr; - void *cur; - dma_addr_t dma_addr; - int count; -} ll_pool; - -static DEFINE_SPINLOCK(ll_lock); - -struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma) -{ - struct pnx4008_dma_ll *ll = NULL; - unsigned long flags; - - spin_lock_irqsave(&ll_lock, flags); - if (ll_pool.count > 4) { /* can give one more */ - ll = *(struct pnx4008_dma_ll **) ll_pool.cur; - *ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr); - *(void **)ll_pool.cur = **(void ***)ll_pool.cur; - memset(ll, 0, sizeof(*ll)); - ll_pool.count--; - } - spin_unlock_irqrestore(&ll_lock, flags); - - return ll; -} - -EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry); - -void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma) -{ - unsigned long flags; - - if (ll) { - if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) { - printk(KERN_ERR "Trying to free entry not allocated by DMA\n"); - BUG(); - } - - if (ll->flags & DMA_BUFFER_ALLOCATED) - ll->free(ll->alloc_data); - - spin_lock_irqsave(&ll_lock, flags); - *(long *)ll = *(long *)ll_pool.cur; - *(long *)ll_pool.cur = (long)ll; - ll_pool.count++; - spin_unlock_irqrestore(&ll_lock, flags); - } -} - -EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry); - -void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll) -{ - struct pnx4008_dma_ll *ptr; - u32 dma; - - while (ll) { - dma = ll->next_dma; - ptr = ll->next; - pnx4008_free_ll_entry(ll, ll_dma); - - ll_dma = dma; - ll = ptr; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_free_ll); - -static int dma_channels_requested = 0; - -static inline void dma_increment_usage(void) -{ - if (!dma_channels_requested++) { - struct clk *clk = clk_get(0, "dma_ck"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 1); - clk_put(clk); - } - pnx4008_config_dma(-1, -1, 1); - } -} -static inline void dma_decrement_usage(void) -{ - if (!--dma_channels_requested) { - struct clk *clk = clk_get(0, "dma_ck"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 0); - clk_put(clk); - } - pnx4008_config_dma(-1, -1, 0); - - } -} - -static DEFINE_SPINLOCK(dma_lock); - -static inline void pnx4008_dma_lock(void) -{ - spin_lock_irq(&dma_lock); -} - -static inline void pnx4008_dma_unlock(void) -{ - spin_unlock_irq(&dma_lock); -} - -#define VALID_CHANNEL(c) (((c) >= 0) && ((c) < MAX_DMA_CHANNELS)) - -int pnx4008_request_channel(char *name, int ch, - void (*irq_handler) (int, int, void *), void *data) -{ - int i, found = 0; - - /* basic sanity checks */ - if (!name || (ch != -1 && !VALID_CHANNEL(ch))) - return -EINVAL; - - pnx4008_dma_lock(); - - /* try grabbing a DMA channel with the requested priority */ - for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) { - if (!dma_channels[i].name && (ch == -1 || ch == i)) { - found = 1; - break; - } - } - - if (found) { - dma_increment_usage(); - dma_channels[i].name = name; - dma_channels[i].irq_handler = irq_handler; - dma_channels[i].data = data; - dma_channels[i].ll = NULL; - dma_channels[i].ll_dma = 0; - } else { - printk(KERN_WARNING "No more available DMA channels for %s\n", - name); - i = -ENODEV; - } - - pnx4008_dma_unlock(); - return i; -} - -EXPORT_SYMBOL_GPL(pnx4008_request_channel); - -void pnx4008_free_channel(int ch) -{ - if (!dma_channels[ch].name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, ch); - return; - } - - pnx4008_dma_lock(); - pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll); - dma_channels[ch].ll = NULL; - dma_decrement_usage(); - - dma_channels[ch].name = NULL; - pnx4008_dma_unlock(); -} - -EXPORT_SYMBOL_GPL(pnx4008_free_channel); - -int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable) -{ - unsigned long dma_cfg = __raw_readl(DMAC_CONFIG); - - switch (ahb_m1_be) { - case 0: - dma_cfg &= ~(1 << 1); - break; - case 1: - dma_cfg |= (1 << 1); - break; - default: - break; - } - - switch (ahb_m2_be) { - case 0: - dma_cfg &= ~(1 << 2); - break; - case 1: - dma_cfg |= (1 << 2); - break; - default: - break; - } - - switch (enable) { - case 0: - dma_cfg &= ~(1 << 0); - break; - case 1: - dma_cfg |= (1 << 0); - break; - default: - break; - } - - pnx4008_dma_lock(); - __raw_writel(dma_cfg, DMAC_CONFIG); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_config_dma); - -int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl, - unsigned long *ctrl) -{ - int i = 0, dbsize, sbsize, err = 0; - - if (!ctrl || !ch_ctrl) { - err = -EINVAL; - goto out; - } - - *ctrl = 0; - - switch (ch_ctrl->tc_mask) { - case 0: - break; - case 1: - *ctrl |= (1 << 31); - break; - - default: - err = -EINVAL; - goto out; - } - - switch (ch_ctrl->cacheable) { - case 0: - break; - case 1: - *ctrl |= (1 << 30); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->bufferable) { - case 0: - break; - case 1: - *ctrl |= (1 << 29); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->priv_mode) { - case 0: - break; - case 1: - *ctrl |= (1 << 28); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->di) { - case 0: - break; - case 1: - *ctrl |= (1 << 27); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->si) { - case 0: - break; - case 1: - *ctrl |= (1 << 26); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->dest_ahb1) { - case 0: - break; - case 1: - *ctrl |= (1 << 25); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->src_ahb1) { - case 0: - break; - case 1: - *ctrl |= (1 << 24); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->dwidth) { - case WIDTH_BYTE: - *ctrl &= ~(7 << 21); - break; - case WIDTH_HWORD: - *ctrl &= ~(7 << 21); - *ctrl |= (1 << 21); - break; - case WIDTH_WORD: - *ctrl &= ~(7 << 21); - *ctrl |= (2 << 21); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->swidth) { - case WIDTH_BYTE: - *ctrl &= ~(7 << 18); - break; - case WIDTH_HWORD: - *ctrl &= ~(7 << 18); - *ctrl |= (1 << 18); - break; - case WIDTH_WORD: - *ctrl &= ~(7 << 18); - *ctrl |= (2 << 18); - break; - - default: - err = -EINVAL; - goto out; - } - dbsize = ch_ctrl->dbsize; - while (!(dbsize & 1)) { - i++; - dbsize >>= 1; - } - if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) { - err = -EINVAL; - goto out; - } else if (i > 1) - i--; - *ctrl &= ~(7 << 15); - *ctrl |= (i << 15); - - sbsize = ch_ctrl->sbsize; - while (!(sbsize & 1)) { - i++; - sbsize >>= 1; - } - if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) { - err = -EINVAL; - goto out; - } else if (i > 1) - i--; - *ctrl &= ~(7 << 12); - *ctrl |= (i << 12); - - if (ch_ctrl->tr_size > 0x7ff) { - err = -E2BIG; - goto out; - } - *ctrl &= ~0x7ff; - *ctrl |= ch_ctrl->tr_size & 0x7ff; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control); - -int pnx4008_dma_parse_control(unsigned long ctrl, - struct pnx4008_dma_ch_ctrl * ch_ctrl) -{ - int err = 0; - - if (!ch_ctrl) { - err = -EINVAL; - goto out; - } - - ch_ctrl->tr_size = ctrl & 0x7ff; - ctrl >>= 12; - - ch_ctrl->sbsize = 1 << (ctrl & 7); - if (ch_ctrl->sbsize > 1) - ch_ctrl->sbsize <<= 1; - ctrl >>= 3; - - ch_ctrl->dbsize = 1 << (ctrl & 7); - if (ch_ctrl->dbsize > 1) - ch_ctrl->dbsize <<= 1; - ctrl >>= 3; - - switch (ctrl & 7) { - case 0: - ch_ctrl->swidth = WIDTH_BYTE; - break; - case 1: - ch_ctrl->swidth = WIDTH_HWORD; - break; - case 2: - ch_ctrl->swidth = WIDTH_WORD; - break; - default: - err = -EINVAL; - goto out; - } - ctrl >>= 3; - - switch (ctrl & 7) { - case 0: - ch_ctrl->dwidth = WIDTH_BYTE; - break; - case 1: - ch_ctrl->dwidth = WIDTH_HWORD; - break; - case 2: - ch_ctrl->dwidth = WIDTH_WORD; - break; - default: - err = -EINVAL; - goto out; - } - ctrl >>= 3; - - ch_ctrl->src_ahb1 = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->dest_ahb1 = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->si = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->di = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->priv_mode = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->bufferable = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->cacheable = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->tc_mask = ctrl & 1; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control); - -int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg, - unsigned long *cfg) -{ - int err = 0; - - if (!cfg || !ch_cfg) { - err = -EINVAL; - goto out; - } - - *cfg = 0; - - switch (ch_cfg->halt) { - case 0: - break; - case 1: - *cfg |= (1 << 18); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->active) { - case 0: - break; - case 1: - *cfg |= (1 << 17); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->lock) { - case 0: - break; - case 1: - *cfg |= (1 << 16); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->itc) { - case 0: - break; - case 1: - *cfg |= (1 << 15); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->ie) { - case 0: - break; - case 1: - *cfg |= (1 << 14); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->flow_cntrl) { - case FC_MEM2MEM_DMA: - *cfg &= ~(7 << 11); - break; - case FC_MEM2PER_DMA: - *cfg &= ~(7 << 11); - *cfg |= (1 << 11); - break; - case FC_PER2MEM_DMA: - *cfg &= ~(7 << 11); - *cfg |= (2 << 11); - break; - case FC_PER2PER_DMA: - *cfg &= ~(7 << 11); - *cfg |= (3 << 11); - break; - case FC_PER2PER_DPER: - *cfg &= ~(7 << 11); - *cfg |= (4 << 11); - break; - case FC_MEM2PER_PER: - *cfg &= ~(7 << 11); - *cfg |= (5 << 11); - break; - case FC_PER2MEM_PER: - *cfg &= ~(7 << 11); - *cfg |= (6 << 11); - break; - case FC_PER2PER_SPER: - *cfg |= (7 << 11); - break; - - default: - err = -EINVAL; - goto out; - } - *cfg &= ~(0x1f << 6); - *cfg |= ((ch_cfg->dest_per & 0x1f) << 6); - - *cfg &= ~(0x1f << 1); - *cfg |= ((ch_cfg->src_per & 0x1f) << 1); - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config); - -int pnx4008_dma_parse_config(unsigned long cfg, - struct pnx4008_dma_ch_config * ch_cfg) -{ - int err = 0; - - if (!ch_cfg) { - err = -EINVAL; - goto out; - } - - cfg >>= 1; - - ch_cfg->src_per = cfg & 0x1f; - cfg >>= 5; - - ch_cfg->dest_per = cfg & 0x1f; - cfg >>= 5; - - switch (cfg & 7) { - case 0: - ch_cfg->flow_cntrl = FC_MEM2MEM_DMA; - break; - case 1: - ch_cfg->flow_cntrl = FC_MEM2PER_DMA; - break; - case 2: - ch_cfg->flow_cntrl = FC_PER2MEM_DMA; - break; - case 3: - ch_cfg->flow_cntrl = FC_PER2PER_DMA; - break; - case 4: - ch_cfg->flow_cntrl = FC_PER2PER_DPER; - break; - case 5: - ch_cfg->flow_cntrl = FC_MEM2PER_PER; - break; - case 6: - ch_cfg->flow_cntrl = FC_PER2MEM_PER; - break; - case 7: - ch_cfg->flow_cntrl = FC_PER2PER_SPER; - } - cfg >>= 3; - - ch_cfg->ie = cfg & 1; - cfg >>= 1; - - ch_cfg->itc = cfg & 1; - cfg >>= 1; - - ch_cfg->lock = cfg & 1; - cfg >>= 1; - - ch_cfg->active = cfg & 1; - cfg >>= 1; - - ch_cfg->halt = cfg & 1; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config); - -void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config, - struct pnx4008_dma_ch_ctrl * ctrl) -{ - int new_len = ctrl->tr_size, num_entries = 0; - int old_len = new_len; - int src_width, dest_width, count = 1; - - switch (ctrl->swidth) { - case WIDTH_BYTE: - src_width = 1; - break; - case WIDTH_HWORD: - src_width = 2; - break; - case WIDTH_WORD: - src_width = 4; - break; - default: - return; - } - - switch (ctrl->dwidth) { - case WIDTH_BYTE: - dest_width = 1; - break; - case WIDTH_HWORD: - dest_width = 2; - break; - case WIDTH_WORD: - dest_width = 4; - break; - default: - return; - } - - while (new_len > 0x7FF) { - num_entries++; - new_len = (ctrl->tr_size + num_entries) / (num_entries + 1); - } - if (num_entries != 0) { - struct pnx4008_dma_ll *ll = NULL; - config->ch_ctrl &= ~0x7ff; - config->ch_ctrl |= new_len; - if (!config->is_ll) { - config->is_ll = 1; - while (num_entries) { - if (!ll) { - config->ll = - pnx4008_alloc_ll_entry(&config-> - ll_dma); - ll = config->ll; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - config->src_addr + - src_width * new_len * count; - else - ll->src_addr = config->src_addr; - if (ctrl->di) - ll->dest_addr = - config->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = config->dest_addr; - ll->ch_ctrl = config->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - } else { - struct pnx4008_dma_ll *ll_old = config->ll; - unsigned long ll_dma_old = config->ll_dma; - while (num_entries) { - if (!ll) { - config->ll = - pnx4008_alloc_ll_entry(&config-> - ll_dma); - ll = config->ll; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - config->src_addr + - src_width * new_len * count; - else - ll->src_addr = config->src_addr; - if (ctrl->di) - ll->dest_addr = - config->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = config->dest_addr; - ll->ch_ctrl = config->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - ll->next_dma = ll_dma_old; - ll->next = ll_old; - } - /* adjust last length/tc */ - ll->ch_ctrl = config->ch_ctrl & (~0x7ff); - ll->ch_ctrl |= old_len - new_len * (count - 1); - config->ch_ctrl &= 0x7fffffff; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry); - -void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll, - struct pnx4008_dma_ch_ctrl * ctrl) -{ - int new_len = ctrl->tr_size, num_entries = 0; - int old_len = new_len; - int src_width, dest_width, count = 1; - - switch (ctrl->swidth) { - case WIDTH_BYTE: - src_width = 1; - break; - case WIDTH_HWORD: - src_width = 2; - break; - case WIDTH_WORD: - src_width = 4; - break; - default: - return; - } - - switch (ctrl->dwidth) { - case WIDTH_BYTE: - dest_width = 1; - break; - case WIDTH_HWORD: - dest_width = 2; - break; - case WIDTH_WORD: - dest_width = 4; - break; - default: - return; - } - - while (new_len > 0x7FF) { - num_entries++; - new_len = (ctrl->tr_size + num_entries) / (num_entries + 1); - } - if (num_entries != 0) { - struct pnx4008_dma_ll *ll = NULL; - cur_ll->ch_ctrl &= ~0x7ff; - cur_ll->ch_ctrl |= new_len; - if (!cur_ll->next) { - while (num_entries) { - if (!ll) { - cur_ll->next = - pnx4008_alloc_ll_entry(&cur_ll-> - next_dma); - ll = cur_ll->next; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - cur_ll->src_addr + - src_width * new_len * count; - else - ll->src_addr = cur_ll->src_addr; - if (ctrl->di) - ll->dest_addr = - cur_ll->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = cur_ll->dest_addr; - ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - } else { - struct pnx4008_dma_ll *ll_old = cur_ll->next; - unsigned long ll_dma_old = cur_ll->next_dma; - while (num_entries) { - if (!ll) { - cur_ll->next = - pnx4008_alloc_ll_entry(&cur_ll-> - next_dma); - ll = cur_ll->next; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - cur_ll->src_addr + - src_width * new_len * count; - else - ll->src_addr = cur_ll->src_addr; - if (ctrl->di) - ll->dest_addr = - cur_ll->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = cur_ll->dest_addr; - ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - - ll->next_dma = ll_dma_old; - ll->next = ll_old; - } - /* adjust last length/tc */ - ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff); - ll->ch_ctrl |= old_len - new_len * (count - 1); - cur_ll->ch_ctrl &= 0x7fffffff; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry); - -int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config) -{ - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - __raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch)); - __raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch)); - - if (config->is_ll) - __raw_writel(config->ll_dma, DMAC_Cx_LLI(ch)); - else - __raw_writel(0, DMAC_Cx_LLI(ch)); - - __raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch)); - __raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; - -} - -EXPORT_SYMBOL_GPL(pnx4008_config_channel); - -int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config) -{ - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config) - return -EINVAL; - - pnx4008_dma_lock(); - config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch)); - - config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch)); - config->is_ll = config->ll_dma ? 1 : 0; - - config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch)); - config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_channel_get_config); - -int pnx4008_dma_ch_enable(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - ch_cfg |= 1; - __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable); - -int pnx4008_dma_ch_disable(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - ch_cfg &= ~1; - __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable); - -int pnx4008_dma_ch_enabled(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return ch_cfg & 1; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled); - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i; - unsigned long dint = __raw_readl(DMAC_INT_STAT); - unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT); - unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT); - unsigned long i_bit; - - for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) { - i_bit = 1 << i; - if (dint & i_bit) { - struct dma_channel *channel = &dma_channels[i]; - - if (channel->name && channel->irq_handler) { - int cause = 0; - - if (eint & i_bit) - cause |= DMA_ERR_INT; - if (tcint & i_bit) - cause |= DMA_TC_INT; - channel->irq_handler(i, cause, channel->data); - } else { - /* - * IRQ for an unregistered DMA channel - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", i); - } - if (tcint & i_bit) - __raw_writel(i_bit, DMAC_INT_TC_CLEAR); - if (eint & i_bit) - __raw_writel(i_bit, DMAC_INT_ERR_CLEAR); - } - } - return IRQ_HANDLED; -} - -static int __init pnx4008_dma_init(void) -{ - int ret, i; - - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - goto out; - } - - ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll); - ll_pool.cur = ll_pool.vaddr = - dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll), - &ll_pool.dma_addr, GFP_KERNEL); - - if (!ll_pool.vaddr) { - ret = -ENOMEM; - free_irq(DMA_INT, NULL); - goto out; - } - - for (i = 0; i < ll_pool.count - 1; i++) { - void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll); - *addr = (void *)addr + sizeof(struct pnx4008_dma_ll); - } - *(long *)(ll_pool.vaddr + - (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) = - (long)ll_pool.vaddr; - - __raw_writel(1, DMAC_CONFIG); - -out: - return ret; -} -arch_initcall(pnx4008_dma_init); diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c deleted file mode 100644 index d3e71d3847b..00000000000 --- a/arch/arm/mach-pnx4008/gpio.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * arch/arm/mach-pnx4008/gpio.c - * - * PNX4008 GPIO driver - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/gpio-pnx4008.h> - -/* register definitions */ -#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE) - -#define PIO_INP_STATE (0x00U) -#define PIO_OUTP_SET (0x04U) -#define PIO_OUTP_CLR (0x08U) -#define PIO_OUTP_STATE (0x0CU) -#define PIO_DRV_SET (0x10U) -#define PIO_DRV_CLR (0x14U) -#define PIO_DRV_STATE (0x18U) -#define PIO_SDINP_STATE (0x1CU) -#define PIO_SDOUTP_SET (0x20U) -#define PIO_SDOUTP_CLR (0x24U) -#define PIO_MUX_SET (0x28U) -#define PIO_MUX_CLR (0x2CU) -#define PIO_MUX_STATE (0x30U) - -static inline void gpio_lock(void) -{ - local_irq_disable(); -} - -static inline void gpio_unlock(void) -{ - local_irq_enable(); -} - -/* Inline functions */ -static inline int gpio_read_bit(u32 reg, int gpio) -{ - u32 bit, val; - int ret = -EFAULT; - - if (gpio < 0) - goto out; - - bit = GPIO_BIT(gpio); - if (bit) { - val = __raw_readl(PIO_VA_BASE + reg); - ret = (val & bit) ? 1 : 0; - } -out: - return ret; -} - -static inline int gpio_set_bit(u32 reg, int gpio) -{ - u32 bit, val; - int ret = -EFAULT; - - if (gpio < 0) - goto out; - - bit = GPIO_BIT(gpio); - if (bit) { - val = __raw_readl(PIO_VA_BASE + reg); - val |= bit; - __raw_writel(val, PIO_VA_BASE + reg); - ret = 0; - } -out: - return ret; -} - -/* Very simple access control, bitmap for allocated/free */ -static unsigned long access_map[4]; -#define INP_INDEX 0 -#define OUTP_INDEX 1 -#define GPIO_INDEX 2 -#define MUX_INDEX 3 - -/*GPIO to Input Mapping */ -static short gpio_to_inp_map[32] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, 10, 11, 12, 13, 14, 24, -1 -}; - -/*GPIO to Mux Mapping */ -static short gpio_to_mux_map[32] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, 0, 1, 4, 5, -1 -}; - -/*Output to Mux Mapping */ -static short outp_to_mux_map[32] = { - -1, -1, -1, 6, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, 2, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1 -}; - -int pnx4008_gpio_register_pin(unsigned short pin) -{ - unsigned long bit = GPIO_BIT(pin); - int ret = -EBUSY; /* Already in use */ - - gpio_lock(); - - if (GPIO_ISBID(pin)) { - if (access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] |= bit; - - } else if (GPIO_ISRAM(pin)) { - if (access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] |= bit; - - } else if (GPIO_ISMUX(pin)) { - if (access_map[MUX_INDEX] & bit) - goto out; - access_map[MUX_INDEX] |= bit; - - } else if (GPIO_ISOUT(pin)) { - if (access_map[OUTP_INDEX] & bit) - goto out; - access_map[OUTP_INDEX] |= bit; - - } else if (GPIO_ISIN(pin)) { - if (access_map[INP_INDEX] & bit) - goto out; - access_map[INP_INDEX] |= bit; - } else - goto out; - ret = 0; - -out: - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_register_pin); - -int pnx4008_gpio_unregister_pin(unsigned short pin) -{ - unsigned long bit = GPIO_BIT(pin); - int ret = -EFAULT; /* Not registered */ - - gpio_lock(); - - if (GPIO_ISBID(pin)) { - if (~access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] &= ~bit; - } else if (GPIO_ISRAM(pin)) { - if (~access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] &= ~bit; - } else if (GPIO_ISMUX(pin)) { - if (~access_map[MUX_INDEX] & bit) - goto out; - access_map[MUX_INDEX] &= ~bit; - } else if (GPIO_ISOUT(pin)) { - if (~access_map[OUTP_INDEX] & bit) - goto out; - access_map[OUTP_INDEX] &= ~bit; - } else if (GPIO_ISIN(pin)) { - if (~access_map[INP_INDEX] & bit) - goto out; - access_map[INP_INDEX] &= ~bit; - } else - goto out; - ret = 0; - -out: - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_unregister_pin); - -unsigned long pnx4008_gpio_read_pin(unsigned short pin) -{ - unsigned long ret = -EFAULT; - int gpio = GPIO_BIT_MASK(pin); - gpio_lock(); - if (GPIO_ISOUT(pin)) { - ret = gpio_read_bit(PIO_OUTP_STATE, gpio); - } else if (GPIO_ISRAM(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) { - ret = gpio_read_bit(PIO_SDINP_STATE, gpio); - } - } else if (GPIO_ISBID(pin)) { - ret = gpio_read_bit(PIO_DRV_STATE, gpio); - if (ret > 0) - ret = gpio_read_bit(PIO_OUTP_STATE, gpio); - else if (ret == 0) - ret = - gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]); - } else if (GPIO_ISIN(pin)) { - ret = gpio_read_bit(PIO_INP_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin); - -/* Write Value to output */ -int pnx4008_gpio_write_pin(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISOUT(pin)) { - printk( "writing '%x' to '%x'\n", - gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR ); - ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio); - } else if (GPIO_ISRAM(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0) - ret = gpio_set_bit(output ? PIO_SDOUTP_SET : - PIO_SDOUTP_CLR, gpio); - } else if (GPIO_ISBID(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0) - ret = gpio_set_bit(output ? PIO_OUTP_SET : - PIO_OUTP_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_write_pin); - -/* Value = 1 : Set GPIO pin as output */ -/* Value = 0 : Set GPIO pin as input */ -int pnx4008_gpio_set_pin_direction(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) { - ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction); - -/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/ -int pnx4008_gpio_read_pin_direction(unsigned short pin) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) { - ret = gpio_read_bit(PIO_DRV_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction); - -/* Value = 1 : Set pin to muxed function */ -/* Value = 0 : Set pin as GPIO */ -int pnx4008_gpio_set_pin_mux(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin)) { - ret = - gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, - gpio_to_mux_map[gpio]); - } else if (GPIO_ISOUT(pin)) { - ret = - gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, - outp_to_mux_map[gpio]); - } else if (GPIO_ISMUX(pin)) { - ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux); - -/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/ -int pnx4008_gpio_read_pin_mux(unsigned short pin) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]); - } else if (GPIO_ISOUT(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]); - } else if (GPIO_ISMUX(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux); diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c deleted file mode 100644 index 550cfc2a1f2..00000000000 --- a/arch/arm/mach-pnx4008/i2c.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * I2C initialization for PNX4008. - * - * Author: Vitaly Wool <vitalywool@gmail.com> - * - * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/clk.h> -#include <linux/i2c.h> -#include <linux/i2c-pnx.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <mach/platform.h> -#include <mach/irqs.h> - -static struct resource i2c0_resources[] = { - { - .start = PNX4008_I2C1_BASE, - .end = PNX4008_I2C1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_1_INT, - .end = I2C_1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c1_resources[] = { - { - .start = PNX4008_I2C2_BASE, - .end = PNX4008_I2C2_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_2_INT, - .end = I2C_2_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c2_resources[] = { - { - .start = PNX4008_USB_CONFIG_BASE + 0x300, - .end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = USB_I2C_INT, - .end = USB_I2C_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c0_device = { - .name = "pnx-i2c.0", - .id = 0, - .resource = i2c0_resources, - .num_resources = ARRAY_SIZE(i2c0_resources), -}; - -static struct platform_device i2c1_device = { - .name = "pnx-i2c.1", - .id = 1, - .resource = i2c1_resources, - .num_resources = ARRAY_SIZE(i2c1_resources), -}; - -static struct platform_device i2c2_device = { - .name = "pnx-i2c.2", - .id = 2, - .resource = i2c2_resources, - .num_resources = ARRAY_SIZE(i2c2_resources), -}; - -static struct platform_device *devices[] __initdata = { - &i2c0_device, - &i2c1_device, - &i2c2_device, -}; - -void __init pnx4008_register_i2c_devices(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h deleted file mode 100644 index 8d2a5ef52c9..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/clock.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/clock.h - * - * Clock control driver for PNX4008 - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_CLOCK_H__ -#define __PNX4008_CLOCK_H__ - -struct module; -struct clk; - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40) -#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44) -#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48) -#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c) -#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50) -#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58) -#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64) -#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68) -#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80) -#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84) -#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90) -#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac) -#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0) -#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4) -#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8) -#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc) -#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4) -#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8) -#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0) -#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4) -#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8) -#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec) -#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc) - -#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE) -#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60) -#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64) -#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68) -#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C) - -#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4) - -#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE) - -#define CLK_RATE_13MHZ 13000 -#define CLK_RATE_1MHZ 1000 -#define CLK_RATE_208MHZ 208000 -#define CLK_RATE_48MHZ 48000 -#define CLK_RATE_32KHZ 32 - -#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */ - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S deleted file mode 100644 index 469d60d97f5..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-pnx4008/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00090000 - add \rv, \rp, #0xf4000000 @ virtual - add \rp, \rp, #0x40000000 @ physical - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h deleted file mode 100644 index f094bf8bfb1..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/dma.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/dma.h - * - * PNX4008 DMA header file - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "platform.h" - -#define MAX_DMA_CHANNELS 8 - -#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE) -#define DMAC_INT_STAT (DMAC_BASE + 0x0000) -#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004) -#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008) -#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c) -#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010) -#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024) -#define DMAC_CONFIG (DMAC_BASE + 0x0030) -#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20) -#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20) -#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20) -#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20) -#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20) - -enum { - WIDTH_BYTE = 0, - WIDTH_HWORD, - WIDTH_WORD -}; - -enum { - FC_MEM2MEM_DMA, - FC_MEM2PER_DMA, - FC_PER2MEM_DMA, - FC_PER2PER_DMA, - FC_PER2PER_DPER, - FC_MEM2PER_PER, - FC_PER2MEM_PER, - FC_PER2PER_SPER -}; - -enum { - DMA_INT_UNKNOWN = 0, - DMA_ERR_INT = 1, - DMA_TC_INT = 2, -}; - -enum { - DMA_BUFFER_ALLOCATED = 1, - DMA_HAS_LL = 2, -}; - -enum { - PER_CAM_DMA_1 = 0, - PER_NDF_FLASH = 1, - PER_MBX_SLAVE_FIFO = 2, - PER_SPI2_REC_XMIT = 3, - PER_MS_SD_RX_XMIT = 4, - PER_HS_UART_1_XMIT = 5, - PER_HS_UART_1_RX = 6, - PER_HS_UART_2_XMIT = 7, - PER_HS_UART_2_RX = 8, - PER_HS_UART_7_XMIT = 9, - PER_HS_UART_7_RX = 10, - PER_SPI1_REC_XMIT = 11, - PER_MLC_NDF_SREC = 12, - PER_CAM_DMA_2 = 13, - PER_PRNG_INFIFO = 14, - PER_PRNG_OUTFIFO = 15, -}; - -struct pnx4008_dma_ch_ctrl { - int tc_mask; - int cacheable; - int bufferable; - int priv_mode; - int di; - int si; - int dest_ahb1; - int src_ahb1; - int dwidth; - int swidth; - int dbsize; - int sbsize; - int tr_size; -}; - -struct pnx4008_dma_ch_config { - int halt; - int active; - int lock; - int itc; - int ie; - int flow_cntrl; - int dest_per; - int src_per; -}; - -struct pnx4008_dma_ll { - unsigned long src_addr; - unsigned long dest_addr; - u32 next_dma; - unsigned long ch_ctrl; - struct pnx4008_dma_ll *next; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -struct pnx4008_dma_config { - int is_ll; - unsigned long src_addr; - unsigned long dest_addr; - unsigned long ch_ctrl; - unsigned long ch_cfg; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *); -extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t); -extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *); - -extern int pnx4008_request_channel(char *, int, - void (*)(int, int, void *), - void *); -extern void pnx4008_free_channel(int); -extern int pnx4008_config_dma(int, int, int); -extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *, - unsigned long *); -extern int pnx4008_dma_parse_control(unsigned long, - struct pnx4008_dma_ch_ctrl *); -extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *, - unsigned long *); -extern int pnx4008_dma_parse_config(unsigned long, - struct pnx4008_dma_ch_config *); -extern int pnx4008_config_channel(int, struct pnx4008_dma_config *); -extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *); -extern int pnx4008_dma_ch_enable(int); -extern int pnx4008_dma_ch_disable(int); -extern int pnx4008_dma_ch_enabled(int); -extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *, - struct pnx4008_dma_ch_ctrl *); -extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *, - struct pnx4008_dma_ch_ctrl *); - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S deleted file mode 100644 index 77a55584671..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for PNX4008-based platforms - * - * 2005-2006 (c) MontaVista Software, Inc. - * Author: Vitaly Wool <vwool@ru.mvista.com> - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include "platform.h" - -#define IO_BASE 0xF0000000 -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#define INTRC_MASK 0x00 -#define INTRC_RAW_STAT 0x04 -#define INTRC_STAT 0x08 -#define INTRC_POLAR 0x0C -#define INTRC_ACT_TYPE 0x10 -#define INTRC_TYPE 0x14 - -#define SIC1_BASE_INT 32 -#define SIC2_BASE_INT 64 - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -/* decode the MIC interrupt numbers */ - ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) - ldr \irqstat, [\base, #INTRC_STAT] - - cmp \irqstat,#1<<16 - movhs \irqnr,#16 - movlo \irqnr,#0 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - -/* was there an interrupt ? if not then drop out with EQ status */ - teq \irqstat,#0 - beq 1003f - -/* and now check for extended IRQ reasons */ - cmp \irqnr,#1 - bls 1003f - cmp \irqnr,#30 - blo 1002f - -/* IRQ 31,30 : High priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */ -/* set the base IRQ number */ - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - moveq \irqnr,#SIC1_BASE_INT - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - movne \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - and \irqstat,\irqstat,\tmp - b 1004f - -1003: -/* IRQ 1,0 : Low priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/ -/* read the correct SIC */ -/* set the base IRQ number */ - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - movne \irqnr,#SIC1_BASE_INT - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - moveq \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - bic \irqstat,\irqstat,\tmp - -1004: - - cmp \irqstat,#1<<16 - addhs \irqnr,\irqnr,#16 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - - -/* is irqstat not zero */ - -1002: -/* we assert that irqstat is not equal to zero and return ne status if true*/ - teq \irqstat,#0 -1003: - .endm - diff --git a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h deleted file mode 100644 index 41027dd7cf7..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h - * - * PNX4008 GPIO driver - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef _PNX4008_GPIO_H_ -#define _PNX4008_GPIO_H_ - - -/* Block numbers */ -#define GPIO_IN (0) -#define GPIO_OUT (0x100) -#define GPIO_BID (0x200) -#define GPIO_RAM (0x300) -#define GPIO_MUX (0x400) - -#define GPIO_TYPE_MASK(K) ((K) & 0x700) - -/* INPUT GPIOs */ -/* GPI */ -#define GPI_00 (GPIO_IN | 0) -#define GPI_01 (GPIO_IN | 1) -#define GPI_02 (GPIO_IN | 2) -#define GPI_03 (GPIO_IN | 3) -#define GPI_04 (GPIO_IN | 4) -#define GPI_05 (GPIO_IN | 5) -#define GPI_06 (GPIO_IN | 6) -#define GPI_07 (GPIO_IN | 7) -#define GPI_08 (GPIO_IN | 8) -#define GPI_09 (GPIO_IN | 9) -#define U1_RX (GPIO_IN | 15) -#define U2_HTCS (GPIO_IN | 16) -#define U2_RX (GPIO_IN | 17) -#define U3_RX (GPIO_IN | 18) -#define U4_RX (GPIO_IN | 19) -#define U5_RX (GPIO_IN | 20) -#define U6_IRRX (GPIO_IN | 21) -#define U7_HCTS (GPIO_IN | 22) -#define U7_RX (GPIO_IN | 23) -/* MISC IN */ -#define SPI1_DATIN (GPIO_IN | 25) -#define DISP_SYNC (GPIO_IN | 26) -#define SPI2_DATIN (GPIO_IN | 27) -#define GPI_11 (GPIO_IN | 28) - -#define GPIO_IN_MASK 0x1eff83ff - -/* OUTPUT GPIOs */ -/* GPO */ -#define GPO_00 (GPIO_OUT | 0) -#define GPO_01 (GPIO_OUT | 1) -#define GPO_02 (GPIO_OUT | 2) -#define GPO_03 (GPIO_OUT | 3) -#define GPO_04 (GPIO_OUT | 4) -#define GPO_05 (GPIO_OUT | 5) -#define GPO_06 (GPIO_OUT | 6) -#define GPO_07 (GPIO_OUT | 7) -#define GPO_08 (GPIO_OUT | 8) -#define GPO_09 (GPIO_OUT | 9) -#define GPO_10 (GPIO_OUT | 10) -#define GPO_11 (GPIO_OUT | 11) -#define GPO_12 (GPIO_OUT | 12) -#define GPO_13 (GPIO_OUT | 13) -#define GPO_14 (GPIO_OUT | 14) -#define GPO_15 (GPIO_OUT | 15) -#define GPO_16 (GPIO_OUT | 16) -#define GPO_17 (GPIO_OUT | 17) -#define GPO_18 (GPIO_OUT | 18) -#define GPO_19 (GPIO_OUT | 19) -#define GPO_20 (GPIO_OUT | 20) -#define GPO_21 (GPIO_OUT | 21) -#define GPO_22 (GPIO_OUT | 22) -#define GPO_23 (GPIO_OUT | 23) - -#define GPIO_OUT_MASK 0xffffff - -/* BIDIRECTIONAL GPIOs */ -/* RAM pins */ -#define RAM_D19 (GPIO_RAM | 0) -#define RAM_D20 (GPIO_RAM | 1) -#define RAM_D21 (GPIO_RAM | 2) -#define RAM_D22 (GPIO_RAM | 3) -#define RAM_D23 (GPIO_RAM | 4) -#define RAM_D24 (GPIO_RAM | 5) -#define RAM_D25 (GPIO_RAM | 6) -#define RAM_D26 (GPIO_RAM | 7) -#define RAM_D27 (GPIO_RAM | 8) -#define RAM_D28 (GPIO_RAM | 9) -#define RAM_D29 (GPIO_RAM | 10) -#define RAM_D30 (GPIO_RAM | 11) -#define RAM_D31 (GPIO_RAM | 12) - -#define GPIO_RAM_MASK 0x1fff - -/* I/O pins */ -#define GPIO_00 (GPIO_BID | 25) -#define GPIO_01 (GPIO_BID | 26) -#define GPIO_02 (GPIO_BID | 27) -#define GPIO_03 (GPIO_BID | 28) -#define GPIO_04 (GPIO_BID | 29) -#define GPIO_05 (GPIO_BID | 30) - -#define GPIO_BID_MASK 0x7e000000 - -/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */ -#define GPIO_SDRAM_SEL (GPIO_MUX | 3) - -#define GPIO_MUX_MASK 0x8 - -/* Extraction/assembly macros */ -#define GPIO_BIT_MASK(K) ((K) & 0x1F) -#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K)) -#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK)) -#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK)) -#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK)) -#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) -#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 -#define SE_USB_OTG_ATX_INT_N 19 -/*18 unused*/ -#define SE_DSP_GPIO4_INT 17 -#define SE_KEY_IRQ 16 -#define SE_DSP_SLAVEPORT_INT 15 -#define SE_DSP_GPIO1_INT 14 -#define SE_DSP_GPIO0_INT 13 -#define SE_DSP_AHB_INT 12 -/*11-6 unused*/ -#define SE_GPIO_05_INT 5 -#define SE_GPIO_04_INT 4 -#define SE_GPIO_03_INT 3 -#define SE_GPIO_02_INT 2 -#define SE_GPIO_01_INT 1 -#define SE_GPIO_00_INT 0 - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern int pnx4008_gpio_register_pin(unsigned short pin); -extern int pnx4008_gpio_unregister_pin(unsigned short pin); -extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); -extern int pnx4008_gpio_write_pin(unsigned short pin, int output); -extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_direction(unsigned short pin); -extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_mux(unsigned short pin); - -static inline void start_int_umask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_mask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_ack(u8 irq) -{ - __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); -} - -static inline void start_int_set_falling_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -static inline void start_int_set_rising_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -#endif /* _PNX4008_GPIO_H_ */ diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h deleted file mode 100644 index 7b98b828d36..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/hardware.h - * - * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> -#include <mach/platform.h> - -/* Start of virtual addresses for IO devices */ -#define IO_BASE 0xF0000000 - -/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */ -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h deleted file mode 100644 index 2a690ca3387..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/irq.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/irq.h - * - * PNX4008 IRQ controller driver - header file - * this one is used in entry-arnv.S as well so it cannot contain C code - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __PNX4008_IRQ_H__ -#define __PNX4008_IRQ_H__ - -#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) -#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) -#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - -/* Manual: Chapter 20, page 195 */ - -#define INTC_BIT(irq) (1<< ((irq) & 0x1F)) - -#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9))) -#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9))) -#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9))) -#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9))) -#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9))) -#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9))) - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern void __init pnx4008_init_irq(void); - -#endif /* __PNX4008_IRQ_H__ */ diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h deleted file mode 100644 index f6b33cf23ae..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/irqs.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/irqs.h - * - * PNX4008 IRQ controller driver - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_IRQS_h__ -#define __PNX4008_IRQS_h__ - -#define NR_IRQS 96 - -/*Manual: table 259, page 199*/ - -/*SUB2 Interrupt Routing (SIC2)*/ - -#define SIC2_BASE_INT 64 - -#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */ -#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */ -#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */ -#define GPI_06_INT 92 -#define GPI_05_INT 91 -#define GPI_04_INT 90 -#define GPI_03_INT 89 -#define GPI_02_INT 88 -#define GPI_01_INT 87 -#define GPI_00_INT 86 -#define BT_CLKREQ_INT 85 -#define SPI1_DATIN_INT 84 -#define U5_RX_INT 83 -#define SDIO_INT_N 82 -#define CAM_HS_INT 81 -#define CAM_VS_INT 80 -#define GPI_07_INT 79 -#define DISP_SYNC_INT 78 -#define DSP_INT8 77 -#define U7_HCTS_INT 76 -#define GPI_10_INT 75 -#define GPI_09_INT 74 -#define GPI_08_INT 73 -#define DSP_INT7 72 -#define U2_HCTS_INT 71 -#define SPI2_DATIN_INT 70 -#define GPIO_05_INT 69 -#define GPIO_04_INT 68 -#define GPIO_03_INT 67 -#define GPIO_02_INT 66 -#define GPIO_01_INT 65 -#define GPIO_00_INT 64 - -/*Manual: table 258, page 198*/ - -/*SUB1 Interrupt Routing (SIC1)*/ - -#define SIC1_BASE_INT 32 - -#define USB_I2C_INT 63 -#define USB_DEV_HP_INT 62 -#define USB_DEV_LP_INT 61 -#define USB_DEV_DMA_INT 60 -#define USB_HOST_INT 59 -#define USB_OTG_ATX_INT_N 58 -#define USB_OTG_TIMER_INT 57 -#define SW_INT 56 -#define SPI1_INT 55 -#define KEY_IRQ 54 -#define DSP_M_INT 53 -#define RTC_INT 52 -#define I2C_1_INT 51 -#define I2C_2_INT 50 -#define PLL1_LOCK_INT 49 -#define PLL2_LOCK_INT 48 -#define PLL3_LOCK_INT 47 -#define PLL4_LOCK_INT 46 -#define PLL5_LOCK_INT 45 -#define SPI2_INT 44 -#define DSP_INT1 43 -#define DSP_INT2 42 -#define DSP_TDM_INT2 41 -#define TS_AUX_INT 40 -#define TS_IRQ 39 -#define TS_P_INT 38 -#define UOUT1_TO_PAD_INT 37 -#define GPI_11_INT 36 -#define DSP_INT4 35 -#define JTAG_COMM_RX_INT 34 -#define JTAG_COMM_TX_INT 33 -#define DSP_INT3 32 - -/*Manual: table 257, page 197*/ - -/*MAIN Interrupt Routing*/ - -#define MAIN_BASE_INT 0 - -#define SUB2_FIQ_N 31 /*active low */ -#define SUB1_FIQ_N 30 /*active low */ -#define JPEG_INT 29 -#define DMA_INT 28 -#define MSTIMER_INT 27 -#define IIR1_INT 26 -#define IIR2_INT 25 -#define IIR7_INT 24 -#define DSP_TDM_INT0 23 -#define DSP_TDM_INT1 22 -#define DSP_P_INT 21 -#define DSP_INT0 20 -#define DUM_INT 19 -#define UOUT0_TO_PAD_INT 18 -#define MP4_ENC_INT 17 -#define MP4_DEC_INT 16 -#define SD0_INT 15 -#define MBX_INT 14 -#define SD1_INT 13 -#define MS_INT_N 12 -#define FLASH_INT 11 /*NAND*/ -#define IIR6_INT 10 -#define IIR5_INT 9 -#define IIR4_INT 8 -#define IIR3_INT 7 -#define WATCH_INT 6 -#define HSTIMER_INT 5 -#define ARCH_TIMER_IRQ HSTIMER_INT -#define CAM_INT 4 -#define PRNG_INT 3 -#define CRYPTO_INT 2 -#define SUB2_IRQ_N 1 /*active low */ -#define SUB1_IRQ_N 0 /*active low */ - -#define PNX4008_IRQ_TYPES \ -{ /*IRQ #'s: */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \ -} - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 - -#endif /* __PNX4008_IRQS_h__ */ diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h deleted file mode 100644 index 6ea02f2176b..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/param.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/param.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define HZ 100 diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h deleted file mode 100644 index 368c2c10a30..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/platform.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/platform.h - * - * PNX4008 Base addresses - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ - -#define PNX4008_IRAM_BASE 0x08000000 -#define PNX4008_IRAM_SIZE 0x00010000 -#define PNX4008_YUV_SLAVE_BASE 0x10000000 -#define PNX4008_DUM_SLAVE_BASE 0x18000000 -#define PNX4008_NDF_FLASH_BASE 0x20020000 -#define PNX4008_SPI1_BASE 0x20088000 -#define PNX4008_SPI2_BASE 0x20090000 -#define PNX4008_SD_CONFIG_BASE 0x20098000 -#define PNX4008_FLASH_DATA 0x200B0000 -#define PNX4008_MLC_FLASH_BASE 0x200B8000 -#define PNX4008_JPEG_CONFIG_BASE 0x300A0000 -#define PNX4008_DMA_CONFIG_BASE 0x31000000 -#define PNX4008_USB_CONFIG_BASE 0x31020000 -#define PNX4008_SDRAM_CFG_BASE 0x31080000 -#define PNX4008_AHB2FAB_BASE 0x40000000 -#define PNX4008_PWRMAN_BASE 0x40004000 -#define PNX4008_INTCTRLMIC_BASE 0x40008000 -#define PNX4008_INTCTRLSIC1_BASE 0x4000C000 -#define PNX4008_INTCTRLSIC2_BASE 0x40010000 -#define PNX4008_HSUART1_BASE 0x40014000 -#define PNX4008_HSUART2_BASE 0x40018000 -#define PNX4008_HSUART7_BASE 0x4001C000 -#define PNX4008_RTC_BASE 0x40024000 -#define PNX4008_PIO_BASE 0x40028000 -#define PNX4008_MSTIMER_BASE 0x40034000 -#define PNX4008_HSTIMER_BASE 0x40038000 -#define PNX4008_WDOG_BASE 0x4003C000 -#define PNX4008_DEBUG_BASE 0x40040000 -#define PNX4008_TOUCH1_BASE 0x40048000 -#define PNX4008_KEYSCAN_BASE 0x40050000 -#define PNX4008_UARTCTRL_BASE 0x40054000 -#define PNX4008_PWM_BASE 0x4005C000 -#define PNX4008_UART3_BASE 0x40080000 -#define PNX4008_UART4_BASE 0x40088000 -#define PNX4008_UART5_BASE 0x40090000 -#define PNX4008_UART6_BASE 0x40098000 -#define PNX4008_I2C1_BASE 0x400A0000 -#define PNX4008_I2C2_BASE 0x400A8000 -#define PNX4008_MAGICGATE_BASE 0x400B0000 -#define PNX4008_DUMCONF_BASE 0x400B8000 -#define PNX4008_DUM_MAINCFG_BASE 0x400BC000 -#define PNX4008_DSP_BASE 0x400C0000 -#define PNX4008_PROFCOUNTER_BASE 0x400C8000 -#define PNX4008_CRYPTO_BASE 0x400D0000 -#define PNX4008_CAMIFCONF_BASE 0x400D8000 -#define PNX4008_YUV2RGB_BASE 0x400E0000 -#define PNX4008_AUDIOCONFIG_BASE 0x400E8000 - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h deleted file mode 100644 index 2fa685bff85..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/pm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/pm.h - * - * PNX4008 Power Management Routiness - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_PNX4008_PM_H -#define __ASM_ARCH_PNX4008_PM_H - -#ifndef __ASSEMBLER__ -#include "irq.h" -#include "irqs.h" -#include "clock.h" - -extern void pnx4008_pm_idle(void); -extern void pnx4008_pm_suspend(void); -extern unsigned int pnx4008_cpu_suspend_sz; -extern void pnx4008_cpu_suspend(void); -extern unsigned int pnx4008_cpu_standby_sz; -extern void pnx4008_cpu_standby(void); - -extern int pnx4008_startup_pll(struct clk *); -extern int pnx4008_shutdown_pll(struct clk *); - -#endif /* ASSEMBLER */ -#endif /* __ASM_ARCH_PNX4008_PM_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h deleted file mode 100644 index b383c7de7ab..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PNX4008_TIMEX_H -#define __PNX4008_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h deleted file mode 100644 index bb4751ee253..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2006 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART5_BASE 0x40090000 - -#define UART5_DR (*(volatile unsigned char *) (UART5_BASE)) -#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18)) - -static __inline__ void putc(char c) -{ - while (UART5_FR & (1 << 5)) - barrier(); - - UART5_DR = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c deleted file mode 100644 index 41e4201972d..00000000000 --- a/arch/arm/mach-pnx4008/irq.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/arm/mach-pnx4008/irq.c - * - * PNX4008 IRQ controller driver - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <mach/irq.h> - -static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES; - -static void pnx4008_mask_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */ -} - -static void pnx4008_unmask_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq)); /* unmask interrupt */ -} - -static void pnx4008_mask_ack_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */ - __raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq)); /* clear interrupt status */ -} - -static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type) -{ - switch (type) { - case IRQ_TYPE_EDGE_RISING: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /*rising edge */ - irq_set_handler(d->irq, handle_edge_irq); - break; - case IRQ_TYPE_EDGE_FALLING: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*falling edge */ - irq_set_handler(d->irq, handle_edge_irq); - break; - case IRQ_TYPE_LEVEL_LOW: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*low level */ - irq_set_handler(d->irq, handle_level_irq); - break; - case IRQ_TYPE_LEVEL_HIGH: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /* high level */ - irq_set_handler(d->irq, handle_level_irq); - break; - - /* IRQ_TYPE_EDGE_BOTH is not supported */ - default: - printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type); - return -1; - } - return 0; -} - -static struct irq_chip pnx4008_irq_chip = { - .irq_ack = pnx4008_mask_ack_irq, - .irq_mask = pnx4008_mask_irq, - .irq_unmask = pnx4008_unmask_irq, - .irq_set_type = pnx4008_set_irq_type, -}; - -void __init pnx4008_init_irq(void) -{ - unsigned int i; - - /* configure IRQ's */ - for (i = 0; i < NR_IRQS; i++) { - set_irq_flags(i, IRQF_VALID); - irq_set_chip(i, &pnx4008_irq_chip); - pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]); - } - - /* configure and enable IRQ 0,1,30,31 (cascade interrupts) */ - pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N), - pnx4008_irq_type[SUB1_IRQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N), - pnx4008_irq_type[SUB2_IRQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N), - pnx4008_irq_type[SUB1_FIQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N), - pnx4008_irq_type[SUB2_FIQ_N]); - - /* mask all others */ - __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) | - (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N), - INTC_ER(MAIN_BASE_INT)); - __raw_writel(0, INTC_ER(SIC1_BASE_INT)); - __raw_writel(0, INTC_ER(SIC2_BASE_INT)); -} - diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c deleted file mode 100644 index 26f8d06b142..00000000000 --- a/arch/arm/mach-pnx4008/pm.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/arm/mach-pnx4008/pm.c - * - * Power Management driver for PNX4008 - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/pm.h> -#include <linux/rtc.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/suspend.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <asm/cacheflush.h> - -#include <mach/hardware.h> -#include <mach/pm.h> -#include <mach/clock.h> - -#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE) - -static void *saved_sram; - -static struct clk *pll4_clk; - -static inline void pnx4008_standby(void) -{ - void (*pnx4008_cpu_standby_ptr) (void); - - local_irq_disable(); - local_fiq_disable(); - - clk_disable(pll4_clk); - - /*saving portion of SRAM to be used by suspend function. */ - memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz); - - /*make sure SRAM copy gets physically written into SDRAM. - SDRAM will be placed into self-refresh during power down */ - flush_cache_all(); - - /*copy suspend function into SRAM */ - memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz); - - /*do suspend */ - pnx4008_cpu_standby_ptr = (void *)SRAM_VA; - pnx4008_cpu_standby_ptr(); - - /*restoring portion of SRAM that was used by suspend function */ - memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz); - - clk_enable(pll4_clk); - - local_fiq_enable(); - local_irq_enable(); -} - -static inline void pnx4008_suspend(void) -{ - void (*pnx4008_cpu_suspend_ptr) (void); - - local_irq_disable(); - local_fiq_disable(); - - clk_disable(pll4_clk); - - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT)); - - /*saving portion of SRAM to be used by suspend function. */ - memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz); - - /*make sure SRAM copy gets physically written into SDRAM. - SDRAM will be placed into self-refresh during power down */ - flush_cache_all(); - - /*copy suspend function into SRAM */ - memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz); - - /*do suspend */ - pnx4008_cpu_suspend_ptr = (void *)SRAM_VA; - pnx4008_cpu_suspend_ptr(); - - /*restoring portion of SRAM that was used by suspend function */ - memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz); - - clk_enable(pll4_clk); - - local_fiq_enable(); - local_irq_enable(); -} - -static int pnx4008_pm_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_STANDBY: - pnx4008_standby(); - break; - case PM_SUSPEND_MEM: - pnx4008_suspend(); - break; - } - return 0; -} - -static int pnx4008_pm_valid(suspend_state_t state) -{ - return (state == PM_SUSPEND_STANDBY) || - (state == PM_SUSPEND_MEM); -} - -static const struct platform_suspend_ops pnx4008_pm_ops = { - .enter = pnx4008_pm_enter, - .valid = pnx4008_pm_valid, -}; - -int __init pnx4008_pm_init(void) -{ - u32 sram_size_to_allocate; - - pll4_clk = clk_get(0, "ck_pll4"); - if (IS_ERR(pll4_clk)) { - printk(KERN_ERR - "PM Suspend cannot acquire ARM(PLL4) clock control\n"); - return PTR_ERR(pll4_clk); - } - - if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz) - sram_size_to_allocate = pnx4008_cpu_standby_sz; - else - sram_size_to_allocate = pnx4008_cpu_suspend_sz; - - saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC); - if (!saved_sram) { - printk(KERN_ERR - "PM Suspend: cannot allocate memory to save portion of SRAM\n"); - clk_put(pll4_clk); - return -ENOMEM; - } - - suspend_set_ops(&pnx4008_pm_ops); - return 0; -} diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c deleted file mode 100644 index 374c138ac1a..00000000000 --- a/arch/arm/mach-pnx4008/serial.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/serial.c - * - * PNX4008 UART initialization - * - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> - -#include <mach/platform.h> -#include <mach/hardware.h> - -#include <linux/serial_core.h> -#include <linux/serial_reg.h> - -#include <mach/gpio-pnx4008.h> -#include <mach/clock.h> - -#define UART_3 0 -#define UART_4 1 -#define UART_5 2 -#define UART_6 3 -#define UART_UNKNOWN (-1) - -#define UART3_BASE_VA IO_ADDRESS(PNX4008_UART3_BASE) -#define UART4_BASE_VA IO_ADDRESS(PNX4008_UART4_BASE) -#define UART5_BASE_VA IO_ADDRESS(PNX4008_UART5_BASE) -#define UART6_BASE_VA IO_ADDRESS(PNX4008_UART6_BASE) - -#define UART_FCR_OFFSET 8 -#define UART_FIFO_SIZE 64 - -void pnx4008_uart_init(void) -{ - u32 tmp; - int i = UART_FIFO_SIZE; - - __raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET); - __raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET); - - /* Send a NULL to fix the UART HW bug */ - __raw_writel(0x00, UART5_BASE_VA); - __raw_writel(0x00, UART3_BASE_VA); - - while (i--) { - tmp = __raw_readl(UART5_BASE_VA); - tmp = __raw_readl(UART3_BASE_VA); - } - __raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET); - __raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET); - - /* setup wakeup interrupt */ - start_int_set_rising_edge(SE_U3_RX_INT); - start_int_ack(SE_U3_RX_INT); - start_int_umask(SE_U3_RX_INT); - - start_int_set_rising_edge(SE_U5_RX_INT); - start_int_ack(SE_U5_RX_INT); - start_int_umask(SE_U5_RX_INT); -} - diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S deleted file mode 100644 index f4eed495d29..00000000000 --- a/arch/arm/mach-pnx4008/sleep.S +++ /dev/null @@ -1,195 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/sleep.S - * - * PNX4008 support for STOP mode and SDRAM self-refresh - * - * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <mach/hardware.h> - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define PWR_CTRL_REG_OFFS 0x44 - -#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE) -#define MPMC_STATUS_REG_OFFS 0x4 - - .text - -ENTRY(pnx4008_cpu_suspend) - @this function should be entered in Direct run mode. - - @ save registers on stack - stmfd sp!, {r0 - r6, lr} - - @ setup Power Manager base address in r4 - @ and put it's value in r5 - mov r4, #(PWRMAN_VA_BASE & 0xff000000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00) - orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff) - ldr r5, [r4, #PWR_CTRL_REG_OFFS] - - @ setup SDRAM controller base address in r2 - @ and put it's value in r3 - mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff) - ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do save current bit settings in r1 - mov r1, r5 - - @ set SDRAM self-refresh bit - orr r5, r5, #(1 << 9) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get into self-refresh mode -2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #(1 << 2) - beq 2b - - @ to prepare SDRAM to get out of self-refresh mode after wakeup - orr r5, r5, #(1 << 7) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do enter stop mode - orr r5, r5, #(1 << 0) - str r5, [r4, #PWR_CTRL_REG_OFFS] - nop - nop - nop - nop - nop - nop - nop - nop - nop - - @ sleeping now... - - @ coming out of STOP mode into Direct Run mode - @ clear STOP mode and SDRAM self-refresh bits - str r1, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get out self-refresh mode -3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #5 - bne 3b - - @ restore regs and return - ldmfd sp!, {r0 - r6, pc} - -ENTRY(pnx4008_cpu_suspend_sz) - .word . - pnx4008_cpu_suspend - -ENTRY(pnx4008_cpu_standby) - @ save registers on stack - stmfd sp!, {r0 - r6, lr} - - @ setup Power Manager base address in r4 - @ and put it's value in r5 - mov r4, #(PWRMAN_VA_BASE & 0xff000000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00) - orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff) - ldr r5, [r4, #PWR_CTRL_REG_OFFS] - - @ setup SDRAM controller base address in r2 - @ and put it's value in r3 - mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff) - ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do save current bit settings in r1 - mov r1, r5 - - @ set SDRAM self-refresh bit - orr r5, r5, #(1 << 9) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get into self-refresh mode -2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #(1 << 2) - beq 2b - - @ set 'get out of self-refresh mode after wakeup' bit - orr r5, r5, #(1 << 7) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - mcr p15, 0, r0, c7, c0, 4 @ kinda sleeping now... - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get out self-refresh mode -3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #5 - bne 3b - - @ restore regs and return - ldmfd sp!, {r0 - r6, pc} - -ENTRY(pnx4008_cpu_standby_sz) - .word . - pnx4008_cpu_standby - -ENTRY(pnx4008_cache_clean_invalidate) - stmfd sp!, {r0 - r6, lr} -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -#else -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate - bne 1b -#endif - ldmfd sp!, {r0 - r6, pc} diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c deleted file mode 100644 index 0cfe8af3d3b..00000000000 --- a/arch/arm/mach-pnx4008/time.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * arch/arm/mach-pnx4008/time.c - * - * PNX4008 Timers - * - * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/kallsyms.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/mach/time.h> -#include <asm/errno.h> - -#include "time.h" - -/*! Note: all timers are UPCOUNTING */ - -/*! - * Returns number of us since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long pnx4008_gettimeoffset(void) -{ - u32 ticks_to_match = - __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER); - u32 elapsed = LATCH - ticks_to_match; - return (elapsed * (tick_nsec / 1000)) / LATCH; -} - -/*! - * IRQ handler for the timer - */ -static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id) -{ - if (__raw_readl(HSTIM_INT) & MATCH0_INT) { - - do { - timer_tick(); - - /* - * this algorithm takes care of possible delay - * for this interrupt handling longer than a normal - * timer period - */ - __raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH, - HSTIM_MATCH0); - __raw_writel(MATCH0_INT, HSTIM_INT); /* clear interrupt */ - - /* - * The goal is to keep incrementing HSTIM_MATCH0 - * register until HSTIM_MATCH0 indicates time after - * what HSTIM_COUNTER indicates. - */ - } while ((signed) - (__raw_readl(HSTIM_MATCH0) - - __raw_readl(HSTIM_COUNTER)) < 0); - } - - return IRQ_HANDLED; -} - -static struct irqaction pnx4008_timer_irq = { - .name = "PNX4008 Tick Timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = pnx4008_timer_interrupt -}; - -/*! - * Set up timer and timer interrupt. - */ -static __init void pnx4008_setup_timer(void) -{ - __raw_writel(RESET_COUNT, MSTIM_CTRL); - while (__raw_readl(MSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */ - __raw_writel(0, MSTIM_CTRL); /* stop the timer */ - __raw_writel(0, MSTIM_MCTRL); - - __raw_writel(RESET_COUNT, HSTIM_CTRL); - while (__raw_readl(HSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */ - __raw_writel(0, HSTIM_CTRL); - __raw_writel(0, HSTIM_MCTRL); - __raw_writel(0, HSTIM_CCR); - __raw_writel(12, HSTIM_PMATCH); /* scale down to 1 MHZ */ - __raw_writel(LATCH, HSTIM_MATCH0); - __raw_writel(MR0_INT, HSTIM_MCTRL); - - setup_irq(HSTIMER_INT, &pnx4008_timer_irq); - - __raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL); /*start timer, stop when JTAG active */ -} - -/* Timer Clock Control in PM register */ -#define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC)) -#define WATCHDOG_CLK_EN 1 -#define TIMER_CLK_EN 2 /* HS and MS timers? */ - -static u32 timclk_ctrl_reg_save; - -void pnx4008_timer_suspend(void) -{ - timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG); - __raw_writel(0, TIMCLK_CTRL_REG); /* disable timers */ -} - -void pnx4008_timer_resume(void) -{ - __raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG); /* enable timers */ -} - -struct sys_timer pnx4008_timer = { - .init = pnx4008_setup_timer, - .offset = pnx4008_gettimeoffset, - .suspend = pnx4008_timer_suspend, - .resume = pnx4008_timer_resume, -}; - diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h deleted file mode 100644 index 75e88c570aa..00000000000 --- a/arch/arm/mach-pnx4008/time.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef PNX_TIME_H -#define PNX_TIME_H - -#include <linux/io.h> -#include <mach/hardware.h> - -#define TICKS2USECS(x) (x) - -/* MilliSecond Timer - Chapter 21 Page 202 */ - -#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) -#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) -#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) -#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) -#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) -#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) - -/* High Speed Timer - Chpater 22, Page 205 */ - -#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) -#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) -#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) -#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) -#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) -#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) -#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) -#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) -#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) -#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) -#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) -#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) - -/* IMPORTANT: both timers are UPCOUNTING */ - -/* xSTIM_MCTRL bit definitions */ -#define MR0_INT 1 -#define RESET_COUNT0 (1<<1) -#define STOP_COUNT0 (1<<2) -#define MR1_INT (1<<3) -#define RESET_COUNT1 (1<<4) -#define STOP_COUNT1 (1<<5) -#define MR2_INT (1<<6) -#define RESET_COUNT2 (1<<7) -#define STOP_COUNT2 (1<<8) - -/* xSTIM_CTRL bit definitions */ -#define COUNT_ENAB 1 -#define RESET_COUNT (1<<1) -#define DEBUG_EN (1<<2) - -/* xSTIM_INT bit definitions */ -#define MATCH0_INT 1 -#define MATCH1_INT (1<<1) -#define MATCH2_INT (1<<2) -#define RTC_TICK0 (1<<4) -#define RTC_TICK1 (1<<5) - -#endif |