diff options
Diffstat (limited to 'arch/arm/mach-pxa/include')
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/arcom-pcmcia.h | 11 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/entry-macro.S | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/hardware.h | 7 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palmld.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palmt5.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palmtc.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palmte2.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palmtreo.h | 67 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palmtx.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palmz72.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/pxa3xx_nand.h | 63 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/pxafb.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/regs-u2d.h | 199 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/treo680.h | 49 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/viper.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/zeus.h | 82 |
16 files changed, 372 insertions, 124 deletions
diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h new file mode 100644 index 00000000000..d428be4db44 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h @@ -0,0 +1,11 @@ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index 241880608ac..a73bc86a3c2 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -46,5 +46,6 @@ beq 1001f bic \irqstat, \irqstat, #0x80000000 mov \irqnr, \irqstat, lsr #16 + add \irqnr, \irqnr, #(PXA_IRQ(0)) 1001: .endm diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index aa3d9f70a08..50f1297bf5a 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -105,6 +105,7 @@ * * PXA935 A0 0x56056931 0x1E653013 * PXA935 B0 0x56056936 0x6E653013 + * PXA935 B1 0x56056938 0x8E653013 */ #ifdef CONFIG_PXA25x #define __cpu_is_pxa210(id) \ @@ -283,7 +284,7 @@ _id == 0x3; \ }) -#define __cpu_is_pxa9xx(id) \ +#define __cpu_is_pxa93x(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ _id == 0x683 || _id == 0x693; \ @@ -299,9 +300,9 @@ __cpu_is_pxa3xx(read_cpuid_id()); \ }) -#define cpu_is_pxa9xx() \ +#define cpu_is_pxa93x() \ ({ \ - __cpu_is_pxa9xx(read_cpuid_id()); \ + __cpu_is_pxa93x(read_cpuid_id()); \ }) /* * return current memory and LCD clock frequency in units of 10kHz diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 8721b801022..ae536e86d8e 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -91,7 +91,7 @@ /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */ #define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ #define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ #define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index d15662aba00..6baf7469d4e 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -66,7 +66,7 @@ /* BATTERY */ #define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */ #define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ #define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ #define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3dc9b074ab4..3f9dd3fd463 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -68,7 +68,7 @@ /* BATTERY */ #define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTC_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTC_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTC_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h index 12361341f9d..f89e989a763 100644 --- a/arch/arm/mach-pxa/include/mach/palmte2.h +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -59,7 +59,7 @@ /* BATTERY */ #define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h new file mode 100644 index 00000000000..2d3f14e3be2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmtreo.h @@ -0,0 +1,67 @@ +/* + * GPIOs and interrupts for Palm Treo smartphones + * + * currently supported: + * Palm Treo 680 (GSM) + * Palm Centro 685 (GSM) + * + * Author: Tomas Cech <sleep_walker@suse.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * find more info at www.hackndev.com + * + */ + +#ifndef _INCLUDE_TREO_H_ +#define _INCLUDE_TREO_H_ + +/* GPIOs */ +#define GPIO_NR_TREO_POWER_DETECT 0 +#define GPIO_NR_TREO_AMP_EN 27 +#define GPIO_NR_TREO_GREEN_LED 20 +#define GPIO_NR_TREO_RED_LED 79 +#define GPIO_NR_TREO_SD_DETECT_N 113 +#define GPIO_NR_TREO_EP_DETECT_N 116 +#define GPIO_NR_TREO_USB_DETECT 1 +#define GPIO_NR_TREO_USB_PULLUP 114 +#define GPIO_NR_TREO_GSM_POWER 40 +#define GPIO_NR_TREO_GSM_RESET 87 +#define GPIO_NR_TREO_GSM_WAKE 57 +#define GPIO_NR_TREO_GSM_HOST_WAKE 14 +#define GPIO_NR_TREO_GSM_TRIGGER 10 +#define GPIO_NR_TREO_IR_EN 115 +#define GPIO_NR_TREO_IR_TXD 47 +#define GPIO_NR_TREO_BL_POWER 38 +#define GPIO_NR_TREO_LCD_POWER 25 + +/* Treo680 specific GPIOs */ +#ifdef CONFIG_MACH_TREO680 +#define GPIO_NR_TREO680_SD_READONLY 33 +#define GPIO_NR_TREO680_SD_POWER 42 +#define GPIO_NR_TREO680_VIBRATE_EN 44 +#define GPIO_NR_TREO680_KEYB_BL 24 +#define GPIO_NR_TREO680_BT_EN 43 +#endif /* CONFIG_MACH_TREO680 */ + +/* Centro685 specific GPIOs */ +#define GPIO_NR_CENTRO_SD_POWER 21 +#define GPIO_NR_CENTRO_VIBRATE_EN 22 +#define GPIO_NR_CENTRO_KEYB_BL 33 +#define GPIO_NR_CENTRO_BT_EN 80 + +/* Various addresses */ +#define TREO_PHYS_RAM_START 0xa0000000 +#define TREO_PHYS_IO_START 0x40000000 +#define TREO_STR_BASE 0xa2000000 + +/* BACKLIGHT */ +#define TREO_MAX_INTENSITY 254 +#define TREO_DEFAULT_INTENSITY 160 +#define TREO_LIMIT_MASK 0x7F +#define TREO_PRESCALER 63 +#define TREO_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1be0db6ed55..10abc4f2e8e 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -94,7 +94,7 @@ /* BATTERY */ #define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2806ef69ba5..2bbcf70dd93 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -49,7 +49,7 @@ /* Battery */ #define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */ #define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h deleted file mode 100644 index 3478eae32d8..00000000000 --- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef __ASM_ARCH_PXA3XX_NAND_H -#define __ASM_ARCH_PXA3XX_NAND_H - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -struct pxa3xx_nand_timing { - unsigned int tCH; /* Enable signal hold time */ - unsigned int tCS; /* Enable signal setup time */ - unsigned int tWH; /* ND_nWE high duration */ - unsigned int tWP; /* ND_nWE pulse time */ - unsigned int tRH; /* ND_nRE high duration */ - unsigned int tRP; /* ND_nRE pulse width */ - unsigned int tR; /* ND_nWE high to ND_nRE low for read */ - unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */ - unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ -}; - -struct pxa3xx_nand_cmdset { - uint16_t read1; - uint16_t read2; - uint16_t program; - uint16_t read_status; - uint16_t read_id; - uint16_t erase; - uint16_t reset; - uint16_t lock; - uint16_t unlock; - uint16_t lock_status; -}; - -struct pxa3xx_nand_flash { - const struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ - const struct pxa3xx_nand_cmdset *cmdset; - - uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */ - uint32_t page_size; /* Page size in bytes (PAGE_SZ) */ - uint32_t flash_width; /* Width of Flash memory (DWIDTH_M) */ - uint32_t dfc_width; /* Width of flash controller(DWIDTH_C) */ - uint32_t num_blocks; /* Number of physical blocks in Flash */ - uint32_t chip_id; -}; - -struct pxa3xx_nand_platform_data { - - /* the data flash bus is shared between the Static Memory - * Controller and the Data Flash Controller, the arbiter - * controls the ownership of the bus - */ - int enable_arbiter; - - /* allow platform code to keep OBM/bootloader defined NFC config */ - int keep_config; - - const struct mtd_partition *parts; - unsigned int nr_parts; - - const struct pxa3xx_nand_flash * flash; - size_t num_flash; -}; - -extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); -#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index f73061c90b5..160ec83f51a 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -76,7 +76,8 @@ struct pxafb_mode_info { u_char bpp; u_int cmap_greyscale:1, depth:8, - unused:23; + transparency:1, + unused:22; /* Parallel Mode Timing */ u_char hsync_len; diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h new file mode 100644 index 00000000000..44b0b20b69a --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h @@ -0,0 +1,199 @@ +#ifndef __ASM_ARCH_PXA3xx_U2D_H +#define __ASM_ARCH_PXA3xx_U2D_H + +#include <mach/bitfield.h> + +/* + * USB2 device controller registers and bits definitions + */ +#define U2DCR (0x0000) /* U2D Control Register */ +#define U2DCR_NDC (1 << 31) /* NAK During Config */ +#define U2DCR_HSTC (0x7 << 28) /* High Speed Timeout Calibration */ +#define U2DCR_SPEOREN (1 << 27) /* Short Packet EOR INTR generation Enable */ +#define U2DCR_FSTC (0x7 << 24) /* Full Speed Timeout Calibration */ +#define U2DCR_UCLKOVR (1 << 22) /* UTM Clock Override */ +#define U2DCR_ABP (1 << 21) /* Application Bus Power */ +#define U2DCR_ADD (1 << 20) /* Application Device Disconnect */ +#define U2DCR_CC (1 << 19) /* Configuration Change */ +#define U2DCR_HS (1 << 18) /* High Speed USB Detection */ +#define U2DCR_SMAC (1 << 17) /* Switch Endpoint Memory to Active Configuration */ +#define U2DCR_DWRE (1 << 16) /* Device Remote Wake-up Feature */ +#define U2DCR_ACN (0xf << 12) /* Active U2D Configuration Number */ +#define U2DCR_AIN (0xf << 8) /* Active U2D Interface Number */ +#define U2DCR_AAISN (0xf << 4) /* Active U2D Alternate Interface Setting Number */ +#define U2DCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */ +#define U2DCR_UDR (1 << 2) /* U2D Resume */ +#define U2DCR_UDA (1 << 1) /* U2D Active */ +#define U2DCR_UDE (1 << 0) /* U2D Enable */ + +#define U2DICR (0x0004) /* U2D Interrupt Control Register */ +#define U2DISR (0x000C) /* U2D Interrupt Status Register */ +#define U2DINT_CC (1 << 31) /* Interrupt - Configuration Change */ +#define U2DINT_SOF (1 << 30) /* Interrupt - SOF */ +#define U2DINT_USOF (1 << 29) /* Interrupt - micro SOF */ +#define U2DINT_RU (1 << 28) /* Interrupt - Resume */ +#define U2DINT_SU (1 << 27) /* Interrupt - Suspend */ +#define U2DINT_RS (1 << 26) /* Interrupt - Reset */ +#define U2DINT_DPE (1 << 25) /* Interrupt - Data Packet Error */ +#define U2DINT_FIFOERR (0x4) /* Interrupt - endpoint FIFO error */ +#define U2DINT_PACKETCMP (0x2) /* Interrupt - endpoint packet complete */ +#define U2DINT_SPACKETCMP (0x1) /* Interrupt - endpoint short packet complete */ + +#define U2DFNR (0x0014) /* U2D Frame Number Register */ + +#define U2DINT(n, intr) (((intr) & 0x07) << (((n) & 0x07) * 3)) +#define U2DICR2 (0x0008) /* U2D Interrupt Control Register 2 */ +#define U2DISR2 (0x0010) /* U2D Interrupt Status Register 2 */ + +#define U2DOTGCR (0x0020) /* U2D OTG Control Register */ +#define U2DOTGCR_OTGEN (1 << 31) /* On-The-Go Enable */ +#define U2DOTGCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocal Port Support */ +#define U2DOTGCR_AHNP (1 << 29) /* A-device Host Negotiation Protocal Support */ +#define U2DOTGCR_BHNP (1 << 28) /* B-device Host Negotiation Protocal Enable */ + +#ifdef CONFIG_CPU_PXA930 +#define U2DOTGCR_LPA (1 << 15) /* ULPI low power mode active */ +#define U2DOTGCR_IESI (1 << 13) /* OTG interrupt Enable */ +#define U2DOTGCR_ISSI (1 << 12) /* OTG interrupt status */ +#endif + +#define U2DOTGCR_CKAF (1 << 5) /* Carkit Mode Alternate Function Select */ +#define U2DOTGCR_UTMID (1 << 4) /* UTMI Interface Disable */ +#define U2DOTGCR_ULAF (1 << 3) /* ULPI Mode Alternate Function Select */ +#define U2DOTGCR_SMAF (1 << 2) /* Serial Mode Alternate Function Select */ +#define U2DOTGCR_RTSM (1 << 1) /* Return to Synchronous Mode (ULPI Mode) */ +#define U2DOTGCR_ULE (1 << 0) /* ULPI Wrapper Enable */ + +#define U2DOTGICR (0x0024) /* U2D OTG Interrupt Control Register */ +#define U2DOTGISR (0x0028) /* U2D OTG Interrupt Status Register */ + +#define U2DOTGINT_SF (1 << 17) /* OTG Set Feature Command Received */ +#define U2DOTGINT_SI (1 << 16) /* OTG Interrupt */ +#define U2DOTGINT_RLS1 (1 << 14) /* RXCMD Linestate[1] Change Interrupt Rise */ +#define U2DOTGINT_RLS0 (1 << 13) /* RXCMD Linestate[0] Change Interrupt Rise */ +#define U2DOTGINT_RID (1 << 12) /* RXCMD OTG ID Change Interrupt Rise */ +#define U2DOTGINT_RSE (1 << 11) /* RXCMD OTG Session End Interrupt Rise */ +#define U2DOTGINT_RSV (1 << 10) /* RXCMD OTG Session Valid Interrupt Rise */ +#define U2DOTGINT_RVV (1 << 9) /* RXCMD OTG Vbus Valid Interrupt Rise */ +#define U2DOTGINT_RCK (1 << 8) /* RXCMD Carkit Interrupt Rise */ +#define U2DOTGINT_FLS1 (1 << 6) /* RXCMD Linestate[1] Change Interrupt Fall */ +#define U2DOTGINT_FLS0 (1 << 5) /* RXCMD Linestate[0] Change Interrupt Fall */ +#define U2DOTGINT_FID (1 << 4) /* RXCMD OTG ID Change Interrupt Fall */ +#define U2DOTGINT_FSE (1 << 3) /* RXCMD OTG Session End Interrupt Fall */ +#define U2DOTGINT_FSV (1 << 2) /* RXCMD OTG Session Valid Interrupt Fall */ +#define U2DOTGINT_FVV (1 << 1) /* RXCMD OTG Vbus Valid Interrupt Fall */ +#define U2DOTGINT_FCK (1 << 0) /* RXCMD Carkit Interrupt Fall */ + +#define U2DOTGUSR (0x002C) /* U2D OTG ULPI Status Register */ +#define U2DOTGUSR_LPA (1 << 31) /* ULPI Low Power Mode Active */ +#define U2DOTGUSR_S6A (1 << 30) /* ULPI Serial Mode (6-pin) Active */ +#define U2DOTGUSR_S3A (1 << 29) /* ULPI Serial Mode (3-pin) Active */ +#define U2DOTGUSR_CKA (1 << 28) /* ULPI Car Kit Mode Active */ +#define U2DOTGUSR_LS1 (1 << 6) /* RXCMD Linestate 1 Status */ +#define U2DOTGUSR_LS0 (1 << 5) /* RXCMD Linestate 0 Status */ +#define U2DOTGUSR_ID (1 << 4) /* OTG IDGnd Status */ +#define U2DOTGUSR_SE (1 << 3) /* OTG Session End Status */ +#define U2DOTGUSR_SV (1 << 2) /* OTG Session Valid Status */ +#define U2DOTGUSR_VV (1 << 1) /* OTG Vbus Valid Status */ +#define U2DOTGUSR_CK (1 << 0) /* Carkit Interrupt Status */ + +#define U2DOTGUCR (0x0030) /* U2D OTG ULPI Control Register */ +#define U2DOTGUCR_RUN (1 << 25) /* RUN */ +#define U2DOTGUCR_RNW (1 << 24) /* Read or Write operation */ +#define U2DOTGUCR_ADDR (0x3f << 16) /* Address of the ULPI PHY register */ +#define U2DOTGUCR_WDATA (0xff << 8) /* The data for a WRITE command */ +#define U2DOTGUCR_RDATA (0xff << 0) /* The data for a READ command */ + +#define U2DP3CR (0x0034) /* U2D Port 3 Control Register */ +#define U2DP3CR_P2SS (0x3 << 8) /* Host Port 2 Serial Mode Select */ +#define U2DP3CR_P3SS (0x7 << 4) /* Host Port 3 Serial Mode Select */ +#define U2DP3CR_VPVMBEN (0x1 << 2) /* Host Port 3 Vp/Vm Block Enable */ +#define U2DP3CR_CFG (0x3 << 0) /* Host Port 3 Configuration */ + +#define U2DCSR0 (0x0100) /* U2D Control/Status Register - Endpoint 0 */ +#define U2DCSR0_IPA (1 << 8) /* IN Packet Adjusted */ +#define U2DCSR0_SA (1 << 7) /* SETUP Active */ +#define U2DCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define U2DCSR0_FST (1 << 5) /* Force Stall */ +#define U2DCSR0_SST (1 << 4) /* Send Stall */ +#define U2DCSR0_DME (1 << 3) /* DMA Enable */ +#define U2DCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define U2DCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define U2DCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define U2DCSR(x) (0x0100 + ((x) << 2)) /* U2D Control/Status Register - Endpoint x */ +#define U2DCSR_BF (1 << 10) /* Buffer Full, for OUT eps */ +#define U2DCSR_BE (1 << 10) /* Buffer Empty, for IN eps */ +#define U2DCSR_DPE (1 << 9) /* Data Packet Error, for ISO eps only */ +#define U2DCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define U2DCSR_SP (1 << 7) /* Short Packet Control/Status, for OUT eps only, readonly */ +#define U2DCSR_BNE (1 << 6) /* Buffer Not Empty, for OUT eps */ +#define U2DCSR_BNF (1 << 6) /* Buffer Not Full, for IN eps */ +#define U2DCSR_FST (1 << 5) /* Force STALL, write 1 set */ +#define U2DCSR_SST (1 << 4) /* Sent STALL, write 1 clear */ +#define U2DCSR_DME (1 << 3) /* DMA Enable */ +#define U2DCSR_TRN (1 << 2) /* Tx/Rx NAK, write 1 clear */ +#define U2DCSR_PC (1 << 1) /* Packet Complete, write 1 clear */ +#define U2DCSR_FS (1 << 0) /* FIFO needs Service */ + +#define U2DBCR0 (0x0200) /* U2D Byte Count Register - Endpoint 0 */ +#define U2DBCR(x) (0x0200 + ((x) << 2)) /* U2D Byte Count Register - Endpoint x */ + +#define U2DDR0 (0x0300) /* U2D Data Register - Endpoint 0 */ + +#define U2DEPCR(x) (0x0400 + ((x) << 2)) /* U2D Configuration Register - Endpoint x */ +#define U2DEPCR_EE (1 << 0) /* Endpoint Enable */ +#define U2DEPCR_BS_MASK (0x3FE) /* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */ + +#define U2DSCA (0x0500) /* U2D Setup Command Address */ +#define U2DSCA_VALUE (0x0120) + +#define U2DEN0 (0x0504) /* U2D Endpoint Information Register - Endpoint 0 */ +#define U2DEN(x) (0x0504 + ((x) << 2)) /* U2D Endpoint Information Register - Endpoint x */ + +/* U2DMA registers */ +#define U2DMACSR0 (0x1000) /* U2DMA Control/Status Register - Channel 0 */ +#define U2DMACSR(x) (0x1000 + ((x) << 2)) /* U2DMA Control/Status Register - Channel x */ +#define U2DMACSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define U2DMACSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#define U2DMACSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define U2DMACSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define U2DMACSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define U2DMACSR_RASIRQEN (1 << 23) /* Request After Cnannel Stopped Interrupt Enable */ +#define U2DMACSR_MASKRUN (1 << 22) /* Mask Run */ +#define U2DMACSR_SCEMC (3 << 18) /* System Bus Split Completion Error Message Class */ +#define U2DMACSR_SCEMI (0x1f << 13) /* System Bus Split Completion Error Message Index */ +#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */ +#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */ +#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */ +#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ +#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */ +#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */ +#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */ + +#define U2DMACR (0x1080) /* U2DMA Control Register */ +#define U2DMAINT (0x10F0) /* U2DMA Interrupt Register */ + +#define U2DMABR0 (0x1100) /* U2DMA Branch Register - Channel 0 */ +#define U2DMABR(x) (0x1100 + (x) << 2) /* U2DMA Branch Register - Channel x */ + +#define U2DMADADR0 (0x1200) /* U2DMA Descriptor Address Register - Channel 0 */ +#define U2DMADADR(x) (0x1200 + (x) * 0x10) /* U2DMA Descriptor Address Register - Channel x */ + +#define U2DMADADR_STOP (1U << 0) + +#define U2DMASADR0 (0x1204) /* U2DMA Source Address Register - Channel 0 */ +#define U2DMASADR(x) (0x1204 + (x) * 0x10) /* U2DMA Source Address Register - Channel x */ +#define U2DMATADR0 (0x1208) /* U2DMA Target Address Register - Channel 0 */ +#define U2DMATADR(x) (0x1208 + (x) * 0x10) /* U2DMA Target Address Register - Channel x */ + +#define U2DMACMDR0 (0x120C) /* U2DMA Command Address Register - Channel 0 */ +#define U2DMACMDR(x) (0x120C + (x) * 0x10) /* U2DMA Command Address Register - Channel x */ + +#define U2DMACMDR_XFRDIS (1 << 31) /* Transfer Direction */ +#define U2DMACMDR_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define U2DMACMDR_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define U2DMACMDR_PACKCOMP (1 << 13) /* Packet Complete */ +#define U2DMACMDR_LEN (0x07ff) /* length mask (max = 2K - 1) */ + +#endif /* __ASM_ARCH_PXA3xx_U2D_H */ diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h deleted file mode 100644 index af443b24d99..00000000000 --- a/arch/arm/mach-pxa/include/mach/treo680.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * GPIOs and interrupts for Palm Treo 680 smartphone - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _INCLUDE_TREO680_H_ -#define _INCLUDE_TREO680_H_ - -/* GPIOs */ -#define GPIO_NR_TREO680_POWER_DETECT 0 -#define GPIO_NR_TREO680_AMP_EN 27 -#define GPIO_NR_TREO680_KEYB_BL 24 -#define GPIO_NR_TREO680_VIBRATE_EN 44 -#define GPIO_NR_TREO680_GREEN_LED 20 -#define GPIO_NR_TREO680_RED_LED 79 -#define GPIO_NR_TREO680_SD_DETECT_N 113 -#define GPIO_NR_TREO680_SD_READONLY 33 -#define GPIO_NR_TREO680_EP_DETECT_N 116 -#define GPIO_NR_TREO680_SD_POWER 42 -#define GPIO_NR_TREO680_USB_DETECT 1 -#define GPIO_NR_TREO680_USB_PULLUP 114 -#define GPIO_NR_TREO680_GSM_POWER 40 -#define GPIO_NR_TREO680_GSM_RESET 87 -#define GPIO_NR_TREO680_GSM_WAKE 57 -#define GPIO_NR_TREO680_GSM_HOST_WAKE 14 -#define GPIO_NR_TREO680_GSM_TRIGGER 10 -#define GPIO_NR_TREO680_BT_EN 43 -#define GPIO_NR_TREO680_IR_EN 115 -#define GPIO_NR_TREO680_IR_TXD 47 -#define GPIO_NR_TREO680_BL_POWER 38 -#define GPIO_NR_TREO680_LCD_POWER 25 - -/* Various addresses */ -#define TREO680_PHYS_RAM_START 0xa0000000 -#define TREO680_PHYS_IO_START 0x40000000 -#define TREO680_STR_BASE 0xa2000000 - -/* BACKLIGHT */ -#define TREO680_MAX_INTENSITY 254 -#define TREO680_DEFAULT_INTENSITY 160 -#define TREO680_LIMIT_MASK 0x7F -#define TREO680_PRESCALER 63 -#define TREO680_PERIOD_NS 3500 - -#endif diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h index 10988c270ca..5f5fbf1f648 100644 --- a/arch/arm/mach-pxa/include/mach/viper.h +++ b/arch/arm/mach-pxa/include/mach/viper.h @@ -85,8 +85,6 @@ /* Interrupt and Configuration Register (VIPER_ICR) */ /* This is a write only register. Only CF_RST is used under Linux */ -extern void viper_cf_rst(int state); - #define VIPER_ICR_RETRIG (1 << 0) #define VIPER_ICR_AUTO_CLR (1 << 1) #define VIPER_ICR_R_DIS (1 << 2) diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h new file mode 100644 index 00000000000..c387046d2f2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -0,0 +1,82 @@ +/* + * arch/arm/mach-pxa/include/mach/zeus.h + * + * Author: David Vrabel + * Created: Sept 28, 2005 + * Copyright: Arcom Control Systems Ltd. + * + * Maintained by: Marc Zyngier <maz@misterjones.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _MACH_ZEUS_H +#define _MACH_ZEUS_H + +/* Physical addresses */ +#define ZEUS_FLASH_PHYS PXA_CS0_PHYS +#define ZEUS_ETH0_PHYS PXA_CS1_PHYS +#define ZEUS_ETH1_PHYS PXA_CS2_PHYS +#define ZEUS_CPLD_PHYS (PXA_CS4_PHYS+0x2000000) +#define ZEUS_SRAM_PHYS PXA_CS5_PHYS +#define ZEUS_PC104IO_PHYS (0x30000000) + +#define ZEUS_CPLD_VERSION_PHYS (ZEUS_CPLD_PHYS + 0x00000000) +#define ZEUS_CPLD_ISA_IRQ_PHYS (ZEUS_CPLD_PHYS + 0x00800000) +#define ZEUS_CPLD_CONTROL_PHYS (ZEUS_CPLD_PHYS + 0x01000000) +#define ZEUS_CPLD_EXTWDOG_PHYS (ZEUS_CPLD_PHYS + 0x01800000) + +/* GPIOs */ +#define ZEUS_AC97_GPIO 0 +#define ZEUS_WAKEUP_GPIO 1 +#define ZEUS_UARTA_GPIO 9 +#define ZEUS_UARTB_GPIO 10 +#define ZEUS_UARTC_GPIO 12 +#define ZEUS_UARTD_GPIO 11 +#define ZEUS_ETH0_GPIO 14 +#define ZEUS_ISA_GPIO 17 +#define ZEUS_BKLEN_GPIO 19 +#define ZEUS_USB2_PWREN_GPIO 22 +#define ZEUS_PTT_GPIO 27 +#define ZEUS_CF_CD_GPIO 35 +#define ZEUS_MMC_WP_GPIO 52 +#define ZEUS_MMC_CD_GPIO 53 +#define ZEUS_EXTGPIO_GPIO 91 +#define ZEUS_CF_PWEN_GPIO 97 +#define ZEUS_CF_RDY_GPIO 99 +#define ZEUS_LCD_EN_GPIO 101 +#define ZEUS_ETH1_GPIO 113 +#define ZEUS_CAN_GPIO 116 + +#define ZEUS_EXT0_GPIO_BASE 128 +#define ZEUS_EXT1_GPIO_BASE 160 +#define ZEUS_USER_GPIO_BASE 192 + +#define ZEUS_EXT0_GPIO(x) (ZEUS_EXT0_GPIO_BASE + (x)) +#define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x)) +#define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x)) + +/* + * CPLD registers: + * Only 4 registers, but spreaded over a 32MB address space. + * Be gentle, and remap that over 32kB... + */ + +#define ZEUS_CPLD (0xf0000000) +#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000) +#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000) +#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000) +#define ZEUS_CPLD_EXTWDOG (ZEUS_CPLD + 0x3000) + +/* CPLD register bits */ +#define ZEUS_CPLD_CONTROL_CF_RST 0x01 + +#define ZEUS_PC104IO (0xf1000000) + +#define ZEUS_SRAM_SIZE (256 * 1024) + +#endif + + |