diff options
Diffstat (limited to 'arch/arm/mach-pxa/spitz.c')
| -rw-r--r-- | arch/arm/mach-pxa/spitz.c | 45 |
1 files changed, 37 insertions, 8 deletions
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2df1b56615b..c094d99ebf5 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -36,6 +36,7 @@ #include <asm/arch/irq.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> +#include <asm/arch/ohci.h> #include <asm/arch/udc.h> #include <asm/arch/pxafb.h> #include <asm/arch/akita.h> @@ -126,10 +127,12 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) cpr &= ~0x0002; if (device == SPITZ_PWR_SD) cpr &= ~0x0004; - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); mdelay(1); reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } else { + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); } } } @@ -293,15 +296,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); - err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, SA_INTERRUPT, - "MMC card detect", data); + err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, + SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING, + "MMC card detect", data); if (err) { printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); return -1; } - set_irq_type(SPITZ_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); - return 0; } @@ -335,6 +337,35 @@ static struct pxamci_platform_data spitz_mci_platform_data = { /* + * USB Host (OHCI) + */ +static int spitz_ohci_init(struct device *dev) +{ + /* Only Port 2 is connected */ + pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN); + pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT); + pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN); + + /* Setup USB Port 2 Output Control Register */ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + + GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST); + + UHCHR = (UHCHR) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + UHCRHDA |= UHCRHDA_NOCP; + + return 0; +} + +static struct pxaohci_platform_data spitz_ohci_platform_data = { + .port_mode = PMM_NPS_MODE, + .init = spitz_ohci_init, +}; + + +/* * Irda */ static void spitz_irda_transceiver_mode(struct device *dev, int mode) @@ -411,6 +442,7 @@ static void __init common_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_mci_info(&spitz_mci_platform_data); + pxa_set_ohci_info(&spitz_ohci_platform_data); pxa_set_ficp_info(&spitz_ficp_platform_data); set_pxa_fb_parent(&spitzssp_device.dev); set_pxa_fb_info(&spitz_pxafb_info); @@ -465,7 +497,6 @@ static void __init fixup_spitz(struct machine_desc *desc, #ifdef CONFIG_MACH_SPITZ MACHINE_START(SPITZ, "SHARP Spitz") - .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_spitz, @@ -478,7 +509,6 @@ MACHINE_END #ifdef CONFIG_MACH_BORZOI MACHINE_START(BORZOI, "SHARP Borzoi") - .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_spitz, @@ -491,7 +521,6 @@ MACHINE_END #ifdef CONFIG_MACH_AKITA MACHINE_START(AKITA, "SHARP Akita") - .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_spitz, |