1 files changed, 83 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index d774430d02c..167412e6bec 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -17,6 +17,7 @@
 
 		.text
 
+#ifdef CONFIG_PXA27x
 ENTRY(pxa_cpu_standby)
 	ldr	r0, =PSSR
 	mov	r1, #(PSSR_PH | PSSR_STS)
@@ -29,3 +30,85 @@ ENTRY(pxa_cpu_standby)
 1:	mcr	p14, 0, r2, c7, c0, 0	@ put the system into Standby
 	str	r1, [r0]		@ make sure PSSR_PH/STS are clear
 	mov	pc, lr
+
+#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define MDCNFG		0x0000
+#define MDCNFG_DMCEN	(1 << 30)
+#define DDR_HCAL	0x0060
+#define DDR_HCAL_HCRNG	0x1f
+#define DDR_HCAL_HCPROG	(1 << 28)
+#define DDR_HCAL_HCEN	(1 << 31)
+#define DMCIER		0x0070
+#define DMCIER_EDLP	(1 << 29)
+#define DMCISR		0x0078
+#define RCOMP		0x0100
+#define RCOMP_SWEVAL	(1 << 31)
+
+ENTRY(pm_enter_standby_start)
+	mov	r1, #0xf6000000		@ DMEMC_REG_BASE (MDCNFG)
+	add	r1, r1, #0x00100000
+
+	/*
+	 * Preload the TLB entry for accessing the dynamic memory
+	 * controller registers.  Note that page table lookups will
+	 * fail until the dynamic memory controller has been
+	 * reinitialised - and that includes MMU page table walks.
+	 * This also means that only the dynamic memory controller
+	 * can be reliably accessed in the code following standby.
+	 */
+	ldr	r2, [r1]		@ Dummy read MDCNFG
+
+	mcr	p14, 0, r0, c7, c0, 0
+	.rept	8
+	nop
+	.endr
+
+	ldr	r0, [r1, #DDR_HCAL]	@ Clear (and wait for) HCEN
+	bic	r0, r0, #DDR_HCAL_HCEN
+	str	r0, [r1, #DDR_HCAL]
+1:	ldr	r0, [r1, #DDR_HCAL]
+	tst	r0, #DDR_HCAL_HCEN
+	bne	1b
+
+	ldr	r0, [r1, #RCOMP]	@ Initiate RCOMP
+	orr	r0, r0, #RCOMP_SWEVAL
+	str	r0, [r1, #RCOMP]
+
+	mov	r0, #~0			@ Clear interrupts
+	str	r0, [r1, #DMCISR]
+
+	ldr	r0, [r1, #DMCIER]	@ set DMIER[EDLP]
+	orr	r0, r0, #DMCIER_EDLP
+	str	r0, [r1, #DMCIER]
+
+	ldr	r0, [r1, #DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
+	bic	r0, r0, #DDR_HCAL_HCRNG
+	orr	r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
+	str	r0, [r1, #DDR_HCAL]
+
+1:	ldr	r0, [r1, #DMCISR]
+	tst	r0, #DMCIER_EDLP
+	beq	1b
+
+	ldr	r0, [r1, #MDCNFG]	@ set MDCNFG[DMCEN]
+	orr	r0, r0, #MDCNFG_DMCEN
+	str	r0, [r1, #MDCNFG]
+1:	ldr	r0, [r1, #MDCNFG]
+	tst	r0, #MDCNFG_DMCEN
+	beq	1b
+
+	ldr	r0, [r1, #DDR_HCAL]	@ set DDR_HCAL[HCRNG]
+	orr	r0, r0, #2 @ HCRNG
+	str	r0, [r1, #DDR_HCAL]
+
+	ldr	r0, [r1, #DMCIER]	@ Clear the interrupt
+	bic	r0, r0, #0x20000000
+	str	r0, [r1, #DMCIER]
+
+	mov	pc, lr
+ENTRY(pm_enter_standby_end)
+
+#endif