summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/viper.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/viper.c')
-rw-r--r--arch/arm/mach-pxa/viper.c35
1 files changed, 24 insertions, 11 deletions
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d33c232b686..5352b4e5a7d 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -47,6 +47,7 @@
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include <mach/regs-uart.h>
+#include <mach/arcom-pcmcia.h>
#include <mach/viper.h>
#include <asm/setup.h>
@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit)
}
/* This function is used from the pcmcia module to reset the CF */
-void viper_cf_rst(int state)
+static void viper_cf_reset(int state)
{
if (state)
viper_icr_set_bit(VIPER_ICR_CF_RST);
else
viper_icr_clear_bit(VIPER_ICR_CF_RST);
}
-EXPORT_SYMBOL(viper_cf_rst);
+
+static struct arcom_pcmcia_pdata viper_pcmcia_info = {
+ .cd_gpio = VIPER_CF_CD_GPIO,
+ .rdy_gpio = VIPER_CF_RDY_GPIO,
+ .pwr_gpio = VIPER_CF_POWER_GPIO,
+ .reset = viper_cf_reset,
+};
+
+static struct platform_device viper_pcmcia_device = {
+ .name = "viper-pcmcia",
+ .id = -1,
+ .dev = {
+ .platform_data = &viper_pcmcia_info,
+ },
+};
/*
* The CPLD version register was not present on VIPER boards prior to
@@ -301,15 +316,6 @@ static void __init viper_init_irq(void)
set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
viper_irq_handler);
set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-
-#ifndef CONFIG_SERIAL_PXA
- /*
- * 8250 doesn't support IRQ_TYPE being passed as part
- * of the plat_serial8250_port structure...
- */
- set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
- set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
-#endif
}
/* Flat Panel */
@@ -539,6 +545,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = VIPER_UARTA_PHYS,
.irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -548,6 +555,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = VIPER_UARTB_PHYS,
.irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -692,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = {
&viper_mtd_devices[0],
&viper_mtd_devices[1],
&viper_backlight_device,
+ &viper_pcmcia_device,
};
static mfp_cfg_t viper_pin_config[] __initdata = {
@@ -908,6 +917,10 @@ static void __init viper_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* Wake-up serial console */
viper_init_serial_gpio();