diff options
Diffstat (limited to 'arch/arm/mach-pxa/vpac270.c')
| -rw-r--r-- | arch/arm/mach-pxa/vpac270.c | 126 |
1 files changed, 119 insertions, 7 deletions
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 9884fa978f1..c9b747cedea 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -25,6 +25,7 @@ #include <linux/dm9000.h> #include <linux/ucb1400.h> #include <linux/ata_platform.h> +#include <linux/regulator/max1586.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,6 +38,7 @@ #include <mach/ohci.h> #include <mach/pxa27x-udc.h> #include <mach/udc.h> +#include <mach/pata_pxa.h> #include <plat/i2c.h> @@ -464,7 +466,6 @@ static struct i2c_board_info __initdata vpac270_i2c_devs[] = { static void __init vpac270_rtc_init(void) { - pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs)); } #else @@ -492,7 +493,55 @@ static struct pxafb_mode_info vpac270_lcd_modes[] = { .vsync_len = 2, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -}, +}, { /* CRT 640x480 */ + .pixclock = 35000, + .xres = 640, + .yres = 480, + .bpp = 16, + .depth = 16, + + .left_margin = 96, + .right_margin = 48, + .upper_margin = 33, + .lower_margin = 10, + + .hsync_len = 48, + .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}, { /* CRT 800x600 H=30kHz V=48HZ */ + .pixclock = 25000, + .xres = 800, + .yres = 600, + .bpp = 16, + .depth = 16, + + .left_margin = 50, + .right_margin = 1, + .upper_margin = 21, + .lower_margin = 12, + + .hsync_len = 8, + .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}, { /* CRT 1024x768 H=40kHz V=50Hz */ + .pixclock = 15000, + .xres = 1024, + .yres = 768, + .bpp = 16, + .depth = 16, + + .left_margin = 220, + .right_margin = 8, + .upper_margin = 33, + .lower_margin = 2, + + .hsync_len = 48, + .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +} }; static struct pxafb_mach_info vpac270_lcd_screen = { @@ -538,9 +587,10 @@ static inline void vpac270_lcd_init(void) {} /****************************************************************************** * PATA IDE ******************************************************************************/ -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -static struct pata_platform_info vpac270_pata_pdata = { - .ioport_shift = 1, +#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE) +static struct pata_pxa_pdata vpac270_pata_pdata = { + .reg_shift = 1, + .dma_dreq = 1, .irq_flags = IRQF_TRIGGER_RISING, }; @@ -555,7 +605,12 @@ static struct resource vpac270_ide_resources[] = { .end = PXA_CS3_PHYS + 0x15f, .flags = IORESOURCE_MEM }, - [2] = { /* IDE IRQ pin */ + [2] = { /* DMA Base address */ + .start = PXA_CS3_PHYS + 0x20, + .end = PXA_CS3_PHYS + 0x2f, + .flags = IORESOURCE_DMA + }, + [3] = { /* IDE IRQ pin */ .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), .flags = IORESOURCE_IRQ @@ -563,11 +618,12 @@ static struct resource vpac270_ide_resources[] = { }; static struct platform_device vpac270_ide_device = { - .name = "pata_platform", + .name = "pata_pxa", .num_resources = ARRAY_SIZE(vpac270_ide_resources), .resource = vpac270_ide_resources, .dev = { .platform_data = &vpac270_pata_pdata, + .coherent_dma_mask = 0xffffffff, } }; @@ -580,6 +636,59 @@ static inline void vpac270_ide_init(void) {} #endif /****************************************************************************** + * Core power regulator + ******************************************************************************/ +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +static struct regulator_consumer_supply vpac270_max1587a_consumers[] = { + { + .supply = "vcc_core", + } +}; + +static struct regulator_init_data vpac270_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 900000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = vpac270_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers), +}; + +static struct max1586_subdev_data vpac270_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &vpac270_max1587a_v3_info, + } +}; + +static struct max1586_platform_data vpac270_max1587a_info = { + .subdevs = vpac270_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs), + .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ +}; + +static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &vpac270_max1587a_info, + }, +}; + +static void __init vpac270_pmic_init(void) +{ + i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info)); +} +#else +static inline void vpac270_pmic_init(void) {} +#endif + + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init vpac270_init(void) @@ -589,7 +698,10 @@ static void __init vpac270_init(void) pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + vpac270_pmic_init(); vpac270_lcd_init(); vpac270_mmc_init(); vpac270_nor_init(); |