summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa')
-rw-r--r--arch/arm/mach-pxa/Kconfig14
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/clock.c1
-rw-r--r--arch/arm/mach-pxa/cm-x300.c5
-rw-r--r--arch/arm/mach-pxa/corgi.c32
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c57
-rw-r--r--arch/arm/mach-pxa/devices.c95
-rw-r--r--arch/arm/mach-pxa/devices.h1
-rw-r--r--arch/arm/mach-pxa/ezx.c4
-rw-r--r--arch/arm/mach-pxa/gpio.c59
-rw-r--r--arch/arm/mach-pxa/h5000.c200
-rw-r--r--arch/arm/mach-pxa/include/mach/h5000.h113
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h48
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa25x.h31
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa27x.h6
-rw-r--r--arch/arm/mach-pxa/include/mach/mioa701.h9
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa-regs.h507
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h5
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa2xx-regs.h12
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-ac97.h99
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-uart.h143
-rw-r--r--arch/arm/mach-pxa/include/mach/uncompress.h2
-rw-r--r--arch/arm/mach-pxa/littleton.c2
-rw-r--r--arch/arm/mach-pxa/magician.c4
-rw-r--r--arch/arm/mach-pxa/mainstone.c4
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c62
-rw-r--r--arch/arm/mach-pxa/mioa701.c203
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c4
-rw-r--r--arch/arm/mach-pxa/poodle.c32
-rw-r--r--arch/arm/mach-pxa/pxa25x.c18
-rw-r--r--arch/arm/mach-pxa/pxa27x.c26
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c24
-rw-r--r--arch/arm/mach-pxa/spitz.c36
-rw-r--r--arch/arm/mach-pxa/tosa.c74
-rw-r--r--arch/arm/mach-pxa/zylonite.c2
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c2
36 files changed, 1171 insertions, 766 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 740f0a382ba..6755c7d6bb3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -19,6 +19,9 @@ config CPU_PXA320
config CPU_PXA930
bool "PXA930 (codename Tavor-P)"
+config CPU_PXA935
+ bool "PXA935 (codename Tavor-P65)"
+
endmenu
endif
@@ -199,6 +202,10 @@ config MACH_E800
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+config MACH_H5000
+ bool "HP iPAQ h5000"
+ select PXA25x
+
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
@@ -283,7 +290,6 @@ config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
- select LEDS_GPIO
select HAVE_PWM
select GPIO_SYSFS
help
@@ -396,6 +402,12 @@ config PXA27x
help
Select code specific to PXA27x variants
+config CPU_PXA26x
+ bool
+ select PXA25x
+ help
+ Select code specific to PXA26x (codename Dalhart)
+
config PXA3xx
bool
select CPU_XSC3
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d64c68b232e..dc184eae510 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
+obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index a3e0e1989a6..40b77408451 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -14,7 +14,6 @@
#include <asm/clkdev.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
#include <mach/hardware.h>
#include "devices.h"
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index deb46cd144b..ff0c577cd1a 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -31,7 +31,6 @@
#include <mach/mfp-pxa300.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
@@ -137,6 +136,10 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
+
+ /* Standard I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 65558d6aa22..c5e28a46b29 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -19,6 +19,7 @@
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/backlight.h>
@@ -541,11 +542,42 @@ err_free_1:
static inline void corgi_init_spi(void) {}
#endif
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
&corgifb_device,
&corgikbd_device,
&corgiled_device,
+ &sharpsl_rom_device,
};
static void corgi_poweroff(void)
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 1f272ea83f3..771dd4eac93 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -64,7 +64,7 @@ typedef struct {
/* Define the refresh period in mSec for the SDRAM and the number of rows */
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
+static unsigned int sdram_rows;
#define CCLKCFG_TURBO 0x1
#define CCLKCFG_FCS 0x2
@@ -73,6 +73,9 @@ typedef struct {
#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
#define MDREFR_DRI_MASK 0xFFF
+#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
+
/*
* PXA255 definitions
*/
@@ -109,6 +112,10 @@ static struct cpufreq_frequency_table
static struct cpufreq_frequency_table
pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+static unsigned int pxa255_turbo_table;
+module_param(pxa255_turbo_table, uint, 0);
+MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
+
/*
* PXA270 definitions
*
@@ -158,22 +165,16 @@ static struct cpufreq_frequency_table
extern unsigned get_clk_frequency_khz(int info);
-static void find_freq_tables(struct cpufreq_policy *policy,
- struct cpufreq_frequency_table **freq_table,
+static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
pxa_freqs_t **pxa_freqs)
{
if (cpu_is_pxa25x()) {
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ if (!pxa255_turbo_table) {
*pxa_freqs = pxa255_run_freqs;
*freq_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ } else {
*pxa_freqs = pxa255_turbo_freqs;
*freq_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- *pxa_freqs = pxa255_run_freqs;
- *freq_table = pxa255_run_freq_table;
}
}
if (cpu_is_pxa27x()) {
@@ -194,14 +195,28 @@ static void pxa27x_guess_max_freq(void)
}
}
+static void init_sdram_rows(void)
+{
+ uint32_t mdcnfg = MDCNFG;
+ unsigned int drac2 = 0, drac0 = 0;
+
+ if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+ drac2 = MDCNFG_DRAC2(mdcnfg);
+
+ if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+ drac0 = MDCNFG_DRAC0(mdcnfg);
+
+ sdram_rows = 1 << (11 + max(drac0, drac2));
+}
+
static u32 mdrefr_dri(unsigned int freq)
{
u32 dri = 0;
if (cpu_is_pxa25x())
- dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+ dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
if (cpu_is_pxa27x())
- dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+ dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
return dri;
}
@@ -212,7 +227,7 @@ static int pxa_verify_policy(struct cpufreq_policy *policy)
pxa_freqs_t *pxa_freqs;
int ret;
- find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
+ find_freq_tables(&pxa_freqs_table, &pxa_freqs);
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
if (freq_debug)
@@ -240,7 +255,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
/* Get the current policy */
- find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
+ find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
/* Lookup the next frequency */
if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
@@ -329,11 +344,15 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
{
int i;
unsigned int freq;
+ struct cpufreq_frequency_table *pxa255_freq_table;
+ pxa_freqs_t *pxa255_freqs;
/* try to guess pxa27x cpu */
if (cpu_is_pxa27x())
pxa27x_guess_max_freq();
+ init_sdram_rows();
+
/* set default policy and cpuinfo */
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
policy->cur = get_clk_frequency_khz(0); /* current freq */
@@ -354,6 +373,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
}
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+ pxa255_turbo_table = !!pxa255_turbo_table;
+
/* Generate the pxa27x cpufreq_frequency_table struct */
for (i = 0; i < NUM_PXA27x_FREQS; i++) {
freq = pxa27x_freqs[i].khz;
@@ -368,8 +389,12 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
* Set the policy's minimum and maximum frequencies from the tables
* just constructed. This sets cpuinfo.mxx_freq, min and max.
*/
- if (cpu_is_pxa25x())
- cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+ if (cpu_is_pxa25x()) {
+ find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
+ pr_info("PXA255 cpufreq using %s frequency table\n",
+ pxa255_turbo_table ? "turbo" : "run");
+ cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
+ }
else if (cpu_is_pxa27x())
cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 35736fc0863..e16f8e3d58d 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,13 +4,12 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <mach/gpio.h>
+#include <mach/pxa-regs.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/i2c.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
@@ -156,8 +155,8 @@ void __init set_pxa_fb_parent(struct device *parent_dev)
static struct resource pxa_resource_ffuart[] = {
{
- .start = __PREG(FFUART),
- .end = __PREG(FFUART) + 35,
+ .start = 0x40100000,
+ .end = 0x40100023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_FFUART,
@@ -175,8 +174,8 @@ struct platform_device pxa_device_ffuart= {
static struct resource pxa_resource_btuart[] = {
{
- .start = __PREG(BTUART),
- .end = __PREG(BTUART) + 35,
+ .start = 0x40200000,
+ .end = 0x40200023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_BTUART,
@@ -194,8 +193,8 @@ struct platform_device pxa_device_btuart = {
static struct resource pxa_resource_stuart[] = {
{
- .start = __PREG(STUART),
- .end = __PREG(STUART) + 35,
+ .start = 0x40700000,
+ .end = 0x40700023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_STUART,
@@ -213,8 +212,8 @@ struct platform_device pxa_device_stuart = {
static struct resource pxa_resource_hwuart[] = {
{
- .start = __PREG(HWUART),
- .end = __PREG(HWUART) + 47,
+ .start = 0x41600000,
+ .end = 0x4160002F,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_HWUART,
@@ -249,18 +248,53 @@ struct platform_device pxa_device_i2c = {
.num_resources = ARRAY_SIZE(pxai2c_resources),
};
-static unsigned long pxa27x_i2c_mfp_cfg[] = {
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-};
-
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
- if (cpu_is_pxa27x())
- pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
pxa_register_device(&pxa_device_i2c, info);
}
+#ifdef CONFIG_PXA27x
+static struct resource pxa27x_resources_i2c_power[] = {
+ {
+ .start = 0x40f00180,
+ .end = 0x40f001a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = pxa27x_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa27x_resources_i2c_power),
+};
+#endif
+
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_resources_i2c_power[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = pxa3xx_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+#endif
+
static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
@@ -296,11 +330,36 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
pxa_register_device(&pxa_device_ficp, info);
}
-struct platform_device pxa_device_rtc = {
+static struct resource pxa_rtc_resources[] = {
+ [0] = {
+ .start = 0x40900000,
+ .end = 0x40900000 + 0x3b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC1Hz,
+ .end = IRQ_RTC1Hz,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_RTCAlrm,
+ .end = IRQ_RTCAlrm,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device sa1100_device_rtc = {
.name = "sa1100-rtc",
.id = -1,
};
+struct platform_device pxa_device_rtc = {
+ .name = "pxa-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_rtc_resources),
+ .resource = pxa_rtc_resources,
+};
+
static struct resource pxa_ac97_resources[] = {
[0] = {
.start = 0x40500000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index bb04af4b0aa..ecc24a4dca6 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -11,6 +11,7 @@ extern struct platform_device pxa_device_hwuart;
extern struct platform_device pxa_device_i2c;
extern struct platform_device pxa_device_i2s;
extern struct platform_device pxa_device_ficp;
+extern struct platform_device sa1100_device_rtc;
extern struct platform_device pxa_device_rtc;
extern struct platform_device pxa_device_ac97;
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 83c56d3abac..3e6aa33a2c7 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -113,6 +113,10 @@ static unsigned long ezx_pin_config[] __initdata = {
GPIO91_USB_P3_1, /* ICL_XRXD */
GPIO56_USB_P3_4, /* ICL_VMOUT */
GPIO113_USB_P3_3, /* /ICL_VMIN */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
};
static void __init ezx_init(void)
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 14930cf8be7..5fec1e479cb 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -25,6 +25,18 @@
#include "generic.h"
+#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
struct pxa_gpio_chip {
struct gpio_chip chip;
@@ -33,6 +45,18 @@ struct pxa_gpio_chip {
int pxa_last_gpio;
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+#define __gpio_is_inverted(gpio) (0)
+#endif
+
/*
* Configure pins for GPIO or other functions
*/
@@ -75,7 +99,10 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags);
value = __raw_readl(gpdr);
- value &= ~mask;
+ if (__gpio_is_inverted(chip->base + offset))
+ value |= mask;
+ else
+ value &= ~mask;
__raw_writel(value, gpdr);
local_irq_restore(flags);
@@ -97,7 +124,10 @@ static int pxa_gpio_direction_output(struct gpio_chip *chip,
gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags);
tmp = __raw_readl(gpdr);
- tmp |= mask;
+ if (__gpio_is_inverted(chip->base + offset))
+ tmp &= ~mask;
+ else
+ tmp |= mask;
__raw_writel(tmp, gpdr);
local_irq_restore(flags);
@@ -173,10 +203,17 @@ static unsigned long GPIO_IRQ_mask[4];
*/
static int __gpio_is_occupied(unsigned gpio)
{
- if (cpu_is_pxa25x() || cpu_is_pxa27x())
- return GAFR(gpio) & (0x3 << (((gpio) & 0xf) * 2));
- else
- return 0;
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ }
+
+ return 0;
}
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
@@ -190,9 +227,8 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
/* Don't mess with enabled GPIOs using preconfigured edges or
* GPIOs set to alternate function or to output during probe
*/
- if ((GPIO_IRQ_rising_edge[idx] |
- GPIO_IRQ_falling_edge[idx] |
- GPDR(gpio)) & GPIO_bit(gpio))
+ if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
+ (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
return 0;
if (__gpio_is_occupied(gpio))
@@ -201,7 +237,10 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
- GPDR(gpio) &= ~GPIO_bit(gpio);
+ if (__gpio_is_inverted(gpio))
+ GPDR(gpio) |= GPIO_bit(gpio);
+ else
+ GPDR(gpio) &= ~GPIO_bit(gpio);
if (type & IRQ_TYPE_EDGE_RISING)
__set_bit(gpio, GPIO_IRQ_rising_edge);
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
new file mode 100644
index 00000000000..da6e4422c0f
--- /dev/null
+++ b/arch/arm/mach-pxa/h5000.c
@@ -0,0 +1,200 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright 2000-2003 Hewlett-Packard Company.
+ * Copyright 2002 Jamey Hicks <jamey.hicks@hp.com>
+ * Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
+ * Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/h5000.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/udc.h>
+#include "generic.h"
+
+/*
+ * Flash
+ */
+
+static struct mtd_partition h5000_flash0_partitions[] = {
+ {
+ .name = "bootldr",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "root",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct mtd_partition h5000_flash1_partitions[] = {
+ {
+ .name = "second root",
+ .size = SZ_16M - 0x00040000,
+ .offset = 0,
+ },
+ {
+ .name = "asset",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data h5000_flash0_data = {
+ .width = 4,
+ .parts = h5000_flash0_partitions,
+ .nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
+};
+
+static struct physmap_flash_data h5000_flash1_data = {
+ .width = 4,
+ .parts = h5000_flash1_partitions,
+ .nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
+};
+
+static struct resource h5000_flash0_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct resource h5000_flash1_resources = {
+ .start = PXA_CS0_PHYS + SZ_32M,
+ .end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device h5000_flash[] = {
+ {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &h5000_flash0_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &h5000_flash0_data,
+ },
+ },
+ {
+ .name = "physmap-flash",
+ .id = 1,
+ .resource = &h5000_flash1_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &h5000_flash1_data,
+ },
+ },
+};
+
+/*
+ * USB Device Controller
+ */
+
+static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
+ .gpio_pullup = H5000_GPIO_USB_PULLUP,
+};
+
+/*
+ * GPIO setup
+ */
+
+static unsigned long h5000_pin_config[] __initdata = {
+ /* Crystal and Clock Signals */
+ GPIO12_32KHz,
+
+ /* SDRAM and Static Memory I/O Signals */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+};
+
+/*
+ * Localbus setup:
+ * CS0: Flash;
+ * CS1: MediaQ chip, select 16-bit bus and vlio;
+ * CS5: SAMCOP.
+ */
+
+static void fix_msc(void)
+{
+ MSC0 = 0x129c24f2;
+ MSC1 = 0x7ff424fa;
+ MSC2 = 0x7ff47ff4;
+
+ MDREFR |= 0x02080000;
+}
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &h5000_flash[0],
+ &h5000_flash[1],
+};
+
+static void __init h5000_init(void)
+{
+ fix_msc();
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+ pxa_set_udc_info(&h5000_udc_mach_info);
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+}
+
+MACHINE_START(H5400, "HP iPAQ H5000")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = h5000_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/h5000.h b/arch/arm/mach-pxa/include/mach/h5000.h
new file mode 100644
index 00000000000..2a5ae380278
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/h5000.h
@@ -0,0 +1,113 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include <mach/mfp-pxa25x.h>
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT (2)
+#define H5000_GPIO_BACKUP_POWER (3)
+#define H5000_GPIO_ACTION_BUTTON (4)
+#define H5000_GPIO_COM_DCD_SOMETHING (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N (9) /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N (10) /* from companion asic */
+#define H5000_GPIO_BT_ENV_0 (11) /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1 (13) /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU (14) /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR (21) /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK (23) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN (26) /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK (28) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT (29) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN (30) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK (31) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK (32) /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD (34) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS (35) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD (36) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR (37) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI (38) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD (39) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR (40) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS (41) /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD (42) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD (43) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS (44) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS (45) /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD (46)
+#define H5000_GPIO_IRDA_TXD (47)
+
+#define H5000_GPIO_POE_N (48) /* used for pcmcia */
+#define H5000_GPIO_PWE_N (49) /* used for pcmcia */
+#define H5000_GPIO_PIOR_N (50) /* used for pcmcia */
+#define H5000_GPIO_PIOW_N (51) /* used for pcmcia */
+#define H5000_GPIO_PCE1_N (52) /* used for pcmcia */
+#define H5000_GPIO_PCE2_N (53) /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL (54) /* used for pcmcia */
+#define H5000_GPIO_PREG_N (55) /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N (56) /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N (57) /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD (58) /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N (60) /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N (61) /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N (62) /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM (64) /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN (65) /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP (66) /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N (67) /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68) /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET (70) /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N (71)
+#define H5000_GPIO_BT_M_RESET (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N (74)
+#define H5000_GPIO_MOTOR_ON_N (75) /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT (76)
+#define H5000_GPIO_USB_CHG_RATE (77) /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index a582a6d9b92..e2d6784aa7e 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -102,6 +102,9 @@
* PXA930 B0 0x69056835 0x5E643013
* PXA930 B1 0x69056837 0x7E643013
* PXA930 B2 0x69056838 0x8E643013
+ *
+ * PXA935 A0 0x56056931 0x1E653013
+ * PXA935 B0 0x56056936 0x6E653013
*/
#ifdef CONFIG_PXA25x
#define __cpu_is_pxa210(id) \
@@ -178,12 +181,22 @@
#define __cpu_is_pxa930(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x683; \
+ _id == 0x683; \
})
#else
#define __cpu_is_pxa930(id) (0)
#endif
+#ifdef CONFIG_CPU_PXA935
+#define __cpu_is_pxa935(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x693; \
+ })
+#else
+#define __cpu_is_pxa935(id) (0)
+#endif
+
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
@@ -204,8 +217,6 @@
__cpu_is_pxa25x(read_cpuid_id()); \
})
-extern int cpu_is_pxa26x(void);
-
#define cpu_is_pxa27x() \
({ \
__cpu_is_pxa27x(read_cpuid_id()); \
@@ -232,6 +243,12 @@ extern int cpu_is_pxa26x(void);
__cpu_is_pxa930(id); \
})
+#define cpu_is_pxa935() \
+ ({ \
+ unsigned int id = read_cpuid(CPUID_ID); \
+ __cpu_is_pxa935(id); \
+ })
+
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
@@ -249,6 +266,12 @@ extern int cpu_is_pxa26x(void);
_id == 0x3; \
})
+#define __cpu_is_pxa9xx(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x683 || _id == 0x693; \
+ })
+
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
@@ -259,21 +282,10 @@ extern int cpu_is_pxa26x(void);
__cpu_is_pxa3xx(read_cpuid_id()); \
})
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
+#define cpu_is_pxa9xx() \
+ ({ \
+ __cpu_is_pxa9xx(read_cpuid_id()); \
+ })
/*
* return current memory and LCD clock frequency in units of 10kHz
*/
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 617cab2cc8d..a72869b73ee 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -158,4 +158,35 @@
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO */
+#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF1)
+#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF1)
+#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF1)
+
+/* SDRAM */
+#define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
+#define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
+#define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
+#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+
+/* USB */
+#define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1)
+#define GPIO32_USB_VP MFP_CFG_IN(GPIO32, AF2)
+#define GPIO34_USB_VM MFP_CFG_IN(GPIO34, AF2)
+#define GPIO39_USB_VPO MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
+#define GPIO56_USB_VMO MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO57_USB_nOE MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
+
+/* ASSP */
+#define GPIO28_ASSP_BITCLK_IN MFP_CFG_IN(GPIO28, AF3)
+#define GPIO28_ASSP_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
+#define GPIO29_ASSP_RXD MFP_CFG_IN(GPIO29, AF3)
+#define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1)
+#define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#endif
+
#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 122bdbd5318..da4f85a4f99 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -11,6 +11,12 @@
#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
+
/* GPIO */
#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
index 8483cb51183..02868447b0b 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -10,12 +10,14 @@
(MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
/* Global GPIOs */
-#define GPIO9_CHARGE_nEN 9
+#define GPIO9_CHARGE_EN 9
#define GPIO18_POWEROFF 18
#define GPIO87_LCD_POWER 87
+#define GPIO96_AC_DETECT 96
+#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
/* USB */
-#define GPIO13_USB_DETECT 13
+#define GPIO13_nUSB_DETECT 13
#define GPIO22_USB_ENABLE 22
/* SDIO bits */
@@ -24,7 +26,10 @@
#define GPIO91_SDIO_EN 91
/* Bluetooth */
+#define GPIO14_BT_nACTIVITY 14
#define GPIO83_BT_ON 83
+#define GPIO77_BT_UNKNOWN1 77
+#define GPIO86_BT_MAYBE_nRESET 86
/* GPS */
#define GPIO23_GPS_UNKNOWN1 23
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 15295d96000..31d615aa772 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -13,6 +13,7 @@
#ifndef __PXA_REGS_H
#define __PXA_REGS_H
+#include <mach/hardware.h>
/*
* PXA Chip selects
@@ -123,298 +124,6 @@
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART FFRBR
-#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
-#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
-#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
-#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
-#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
-#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
-#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
-#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
-#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
-#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
-#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
-#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART BTRBR
-#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
-#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
-#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
-#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
-#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
-#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
-#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
-#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
-#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
-#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
-#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
-#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART STRBR
-#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
-#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
-#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
-#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
-#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
-#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
-#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
-#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
-#define STMSR __REG(0x40700018) /* Reserved */
-#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
-#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
-#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART HWRBR
-#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
-#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
-#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
-#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
-#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
-#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
-#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
-#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
-#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
-#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
-#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
-#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
-#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
-#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
-#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE (1 << 7) /* DMA Requests Enable */
-#define IER_UUE (1 << 6) /* UART Unit Enable */
-#define IER_NRZE (1 << 5) /* NRZ coding Enable */
-#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
-#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
-#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
-#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
-#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
-#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
-#define IIR_TOD (1 << 3) /* Time Out Detected */
-#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
-#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
-#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
-
-#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
-#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
-#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
-#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
-#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1 (0)
-#define FCR_ITL_8 (FCR_ITL1)
-#define FCR_ITL_16 (FCR_ITL2)
-#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
-#define LCR_SB (1 << 6) /* Set Break */
-#define LCR_STKYP (1 << 5) /* Sticky Parity */
-#define LCR_EPS (1 << 4) /* Even Parity Select */
-#define LCR_PEN (1 << 3) /* Parity Enable */
-#define LCR_STB (1 << 2) /* Stop Bit */
-#define LCR_WLS1 (1 << 1) /* Word Length Select */
-#define LCR_WLS0 (1 << 0) /* Word Length Select */
-
-#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
-#define LSR_TEMT (1 << 6) /* Transmitter Empty */
-#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
-#define LSR_BI (1 << 4) /* Break Interrupt */
-#define LSR_FE (1 << 3) /* Framing Error */
-#define LSR_PE (1 << 2) /* Parity Error */
-#define LSR_OE (1 << 1) /* Overrun Error */
-#define LSR_DR (1 << 0) /* Data Ready */
-
-#define MCR_LOOP (1 << 4)
-#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
-#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
-#define MCR_RTS (1 << 1) /* Request to Send */
-#define MCR_DTR (1 << 0) /* Data Terminal Ready */
-
-#define MSR_DCD (1 << 7) /* Data Carrier Detect */
-#define MSR_RI (1 << 6) /* Ring Indicator */
-#define MSR_DSR (1 << 5) /* Data Set Ready */
-#define MSR_CTS (1 << 4) /* Clear To Send */
-#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
-#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
-#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
-#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
-#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
-#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
-#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
- */
-
-/*
- * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
- */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR __REG(0x40500000) /* PCM Out Control Register */
-#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define PICR __REG(0x40500004) /* PCM In Control Register */
-#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MCCR __REG(0x40500008) /* Mic In Control Register */
-#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define GCR __REG(0x4050000C) /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
-#endif
-#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
-#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
-#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
-#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
-#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
-
-#define POSR __REG(0x40500010) /* PCM Out Status Register */
-#define POSR_FIFOE (1 << 4) /* FIFO error */
-#define POSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define PISR __REG(0x40500014) /* PCM In Status Register */
-#define PISR_FIFOE (1 << 4) /* FIFO error */
-#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MCSR __REG(0x40500018) /* Mic In Status Register */
-#define MCSR_FIFOE (1 << 4) /* FIFO error */
-#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define GSR __REG(0x4050001C) /* Global Status Register */
-#define GSR_CDONE (1 << 19) /* Command Done */
-#define GSR_SDONE (1 << 18) /* Status Done */
-#define GSR_RDCS (1 << 15) /* Read Completion Status */
-#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
-#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
-#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
-#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
-#define GSR_PCR (1 << 8) /* Primary Codec Ready */
-#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
-#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
-#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
-#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
-#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
-#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
-#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
-
-#define CAR __REG(0x40500020) /* CODEC Access Register */
-#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
-
-#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
-#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
-
-#define MOCR __REG(0x40500100) /* Modem Out Control Register */
-#define MOCR_FEIE (1 << 3) /* FIFO Error */
-#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MICR __REG(0x40500108) /* Modem In Control Register */
-#define MICR_FEIE (1 << 3) /* FIFO Error */
-#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MOSR __REG(0x40500110) /* Modem Out Status Register */
-#define MOSR_FIFOE (1 << 4) /* FIFO error */
-#define MOSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MISR __REG(0x40500118) /* Modem In Status Register */
-#define MISR_FIFOE (1 << 4) /* FIFO error */
-#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
-#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
-#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
-#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
-
-
-/*
- * Fast Infrared Communication Port
- */
-
-#define FICP __REG(0x40800000) /* Start of FICP area */
-#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
-#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
-#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
-#define ICDR __REG(0x4080000c) /* ICP Data Register */
-#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
-#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
-
-#define ICCR0_AME (1 << 7) /* Address match enable */
-#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
-#define ICCR0_RXE (1 << 4) /* Receive enable */
-#define ICCR0_TXE (1 << 3) /* Transmit enable */
-#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
-#define ICCR0_LBM (1 << 1) /* Loopback mode */
-#define ICCR0_ITR (1 << 0) /* IrDA transmission */
-
-#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
-#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
-#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
-#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
-#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
-#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
-
-#ifdef CONFIG_PXA27x
-#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
-#endif
-#define ICSR0_FRE (1 << 5) /* Framing error */
-#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
-#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
-#define ICSR0_RAB (1 << 2) /* Receiver abort */
-#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
-#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
-
-#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
-#define ICSR1_CRE (1 << 5) /* CRC error */
-#define ICSR1_EOF (1 << 4) /* End of frame */
-#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
-#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
-#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
-#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
-
-
/*
* Real Time Clock
*/
@@ -463,19 +172,6 @@
/*
- * Pulse Width Modulator
- */
-
-#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
-#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
-
-#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
-#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
-
-
-/*
* Interrupt Controller
*/
@@ -496,19 +192,6 @@
* General Purpose I/O
*/
-#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
@@ -558,10 +241,6 @@
#define GPIO_bit(x) (1 << ((x) & 0x1f))
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/* Interrupt Controller */
-
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
@@ -580,189 +259,5 @@
#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
-/*
- * Power Manager - see pxa2xx-regs.h
- */
-
-/*
- * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
- */
-
-/*
- * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
- */
-
-/*
- * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
- */
-
-#ifdef CONFIG_PXA27x
-
-/* Camera Interface */
-#define CICR0 __REG(0x50000000)
-#define CICR1 __REG(0x50000004)
-#define CICR2 __REG(0x50000008)
-#define CICR3 __REG(0x5000000C)
-#define CICR4 __REG(0x50000010)
-#define CISR __REG(0x50000014)
-#define CIFR __REG(0x50000018)
-#define CITOR __REG(0x5000001C)
-#define CIBR0 __REG(0x50000028)
-#define CIBR1 __REG(0x50000030)
-#define CIBR2 __REG(0x50000038)
-
-#define CICR0_DMAEN (1 << 31) /* DMA request enable */
-#define CICR0_PAR_EN (1 << 30) /* Parity enable */
-#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
-#define CICR0_ENB (1 << 28) /* Camera interface enable */
-#define CICR0_DIS (1 << 27) /* Camera interface disable */
-#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
-#define CICR0_TOM (1 << 9) /* Time-out mask */
-#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
-#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
-#define CICR0_EOLM (1 << 6) /* End-of-line mask */
-#define CICR0_PERRM (1 << 5) /* Parity-error mask */
-#define CICR0_QDM (1 << 4) /* Quick-disable mask */
-#define CICR0_CDM (1 << 3) /* Disable-done mask */
-#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
-#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
-#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
-
-#define CICR1_TBIT (1 << 31) /* Transparency bit */
-#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
-#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
-#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
-#define CICR1_RGB_F (1 << 11) /* RGB format */
-#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
-#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
-#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
-#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
-#define CICR1_DW (0x7 << 0) /* Data width mask */
-
-#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
- wait count mask */
-#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
- wait count mask */
-#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
-#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR2_FSW (0x7 << 0) /* Frame stabilization
- wait count mask */
-
-#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
- wait count mask */
-#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
- wait count mask */
-#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
-#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
-
-#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
-#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
-#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
-#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
-#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
-#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
-#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
-#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
-
-#define CISR_FTO (1 << 15) /* FIFO time-out */
-#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
-#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
-#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
-#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
-#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
-#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
-#define CISR_EOL (1 << 8) /* End of line */
-#define CISR_PAR_ERR (1 << 7) /* Parity error */
-#define CISR_CQD (1 << 6) /* Camera interface quick disable */
-#define CISR_CDD (1 << 5) /* Camera interface disable done */
-#define CISR_SOF (1 << 4) /* Start of frame */
-#define CISR_EOF (1 << 3) /* End of frame */
-#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
-#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
-#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
-
-#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
-#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
-#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
-#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
-#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
-#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
-#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
-#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
-
-#define SRAM_SIZE 0x40000 /* 4x64K */
-
-#define SRAM_MEM_PHYS 0x5C000000
-
-#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
-#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
-#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
-
-#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
-#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
-#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
-
-#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
-#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
-#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
-
-#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
-#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
-#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
-
-#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
-#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
-
-#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
-#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
-
-#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
-#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
-
-#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
-#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
-
-#endif
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE 0x1
-#define PWRMODE_STANDBY 0x2
-#define PWRMODE_SLEEP 0x3
-#define PWRMODE_DEEPSLEEP 0x7
#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index 6ef1dd09970..d83393e2527 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -365,4 +365,9 @@
#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN)
#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 806ecfea44b..77102d695cc 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -49,6 +49,11 @@
#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
@@ -243,4 +248,11 @@
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
#endif
diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h
new file mode 100644
index 00000000000..e41b9d202b8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ac97.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define GCR __REG(0x4050000C) /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
+#endif
+#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
+#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
+#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
+#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
+
+#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR_FIFOE (1 << 4) /* FIFO error */
+#define POSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR_FIFOE (1 << 4) /* FIFO error */
+#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR_FIFOE (1 << 4) /* FIFO error */
+#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR_CDONE (1 << 19) /* Command Done */
+#define GSR_SDONE (1 << 18) /* Status Done */
+#define GSR_RDCS (1 << 15) /* Read Completion Status */
+#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
+#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
+#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
+#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
+#define GSR_PCR (1 << 8) /* Primary Codec Ready */
+#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
+#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
+#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
+#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
+#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
+#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
+#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
+
+#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
+
+#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
+#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+
+#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR_FEIE (1 << 3) /* FIFO Error */
+#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR_FEIE (1 << 3) /* FIFO Error */
+#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR_FIFOE (1 << 4) /* FIFO error */
+#define MOSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR_FIFOE (1 << 4) /* FIFO error */
+#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
+#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
+#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
+#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/include/mach/regs-uart.h
new file mode 100644
index 00000000000..55aeb7fb72f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-uart.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_ARCH_REGS_UART_H
+#define __ASM_ARCH_REGS_UART_H
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART FFRBR
+#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
+#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
+#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
+#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
+#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
+#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
+#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
+#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
+#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
+#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
+#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
+#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART BTRBR
+#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
+#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
+#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
+#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
+#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
+#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
+#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
+#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
+#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
+#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
+#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
+#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART STRBR
+#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
+#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
+#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
+#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
+#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
+#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
+#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
+#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
+#define STMSR __REG(0x40700018) /* Reserved */
+#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
+#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
+#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART HWRBR
+#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
+#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
+#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
+#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
+#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
+#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
+#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
+#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
+#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
+#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
+#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
+#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
+#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
+#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
+#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4)
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
+#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
+#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
+#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
+#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
+
+#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 21e3e890af9..a9a4f302b6e 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,7 +10,7 @@
*/
#include <linux/serial_reg.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
#include <asm/mach-types.h>
#define __REG(x) ((volatile unsigned long *)x)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index b4d00aba0e3..5609f52e36b 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/smc91x.h>
@@ -36,7 +37,6 @@
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa300.h>
-#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 519138bc5f8..bf59cec27de 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -123,6 +123,10 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO107_GPIO, /* DS1WM_IRQ */
GPIO108_GPIO, /* GSM_READY */
GPIO115_GPIO, /* nPEN_IRQ */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
};
/*
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2c7ad8f2b6..5f224968043 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -128,6 +128,10 @@ static unsigned long mainstone_pin_config[] = {
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 2061c00c8ea..33626de8cbf 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -38,12 +38,13 @@ struct gpio_desc {
unsigned valid : 1;
unsigned can_wakeup : 1;
unsigned keypad_gpio : 1;
+ unsigned dir_inverted : 1;
unsigned int mask; /* bit mask in PWER or PKWR */
+ unsigned int mux_mask; /* bit mask of muxed gpio bits, 0 if no mux */
unsigned long config;
};
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
-static int gpio_nr;
static unsigned long gpdr_lpm[4];
@@ -54,7 +55,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
int shft = (gpio & 0xf) << 1;
int fn = MFP_AF(c);
- int dir = c & MFP_DIR_OUT;
+ int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
if (fn > 3)
return -EINVAL;
@@ -68,7 +69,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
else
GAFR_U(bank) = gafr;
- if (dir == MFP_DIR_OUT)
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
GPDR(gpio) |= mask;
else
GPDR(gpio) &= ~mask;
@@ -77,11 +78,11 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
switch (c & MFP_LPM_STATE_MASK) {
case MFP_LPM_DRIVE_HIGH:
PGSR(bank) |= mask;
- dir = MFP_DIR_OUT;
+ is_out = 1;
break;
case MFP_LPM_DRIVE_LOW:
PGSR(bank) &= ~mask;
- dir = MFP_DIR_OUT;
+ is_out = 1;
break;
case MFP_LPM_DEFAULT:
break;
@@ -92,7 +93,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
break;
}
- if (dir == MFP_DIR_OUT)
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
gpdr_lpm[bank] |= mask;
else
gpdr_lpm[bank] &= ~mask;
@@ -106,7 +107,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
return -EINVAL;
}
- if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
+ if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
pr_warning("%s: output GPIO%d unable to wakeup\n",
__func__, gpio);
return -EINVAL;
@@ -169,7 +170,7 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
int gpio_set_wake(unsigned int gpio, unsigned int on)
{
struct gpio_desc *d;
- unsigned long c;
+ unsigned long c, mux_taken;
if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
return -EINVAL;
@@ -183,9 +184,13 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
if (d->keypad_gpio)
return -EINVAL;
+ mux_taken = (PWER & d->mux_mask) & (~d->mask);
+ if (on && mux_taken)
+ return -EBUSY;
+
if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
if (on) {
- PWER |= d->mask;
+ PWER = (PWER & ~d->mux_mask) | d->mask;
if (c & MFP_LPM_EDGE_RISE)
PRER |= d->mask;
@@ -210,7 +215,7 @@ static void __init pxa25x_mfp_init(void)
{
int i;
- for (i = 0; i <= 84; i++)
+ for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1;
for (i = 0; i <= 15; i++) {
@@ -218,7 +223,11 @@ static void __init pxa25x_mfp_init(void)
gpio_desc[i].mask = GPIO_bit(i);
}
- gpio_nr = 85;
+ /* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
+ * direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
+ */
+ for (i = 86; i <= pxa_last_gpio; i++)
+ gpio_desc[i].dir_inverted = 1;
}
#else
static inline void pxa25x_mfp_init(void) {}
@@ -251,11 +260,27 @@ int keypad_set_wake(unsigned int on)
return 0;
}
+#define PWER_WEMUX2_GPIO38 (1 << 16)
+#define PWER_WEMUX2_GPIO53 (2 << 16)
+#define PWER_WEMUX2_GPIO40 (3 << 16)
+#define PWER_WEMUX2_GPIO36 (4 << 16)
+#define PWER_WEMUX2_MASK (7 << 16)
+#define PWER_WEMUX3_GPIO31 (1 << 19)
+#define PWER_WEMUX3_GPIO113 (2 << 19)
+#define PWER_WEMUX3_MASK (3 << 19)
+
+#define INIT_GPIO_DESC_MUXED(mux, gpio) \
+do { \
+ gpio_desc[(gpio)].can_wakeup = 1; \
+ gpio_desc[(gpio)].mask = PWER_ ## mux ## _GPIO ##gpio; \
+ gpio_desc[(gpio)].mux_mask = PWER_ ## mux ## _MASK; \
+} while (0)
+
static void __init pxa27x_mfp_init(void)
{
int i, gpio;
- for (i = 0; i <= 120; i++) {
+ for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration
*/
@@ -286,7 +311,12 @@ static void __init pxa27x_mfp_init(void)
gpio_desc[35].can_wakeup = 1;
gpio_desc[35].mask = PWER_WE35;
- gpio_nr = 121;
+ INIT_GPIO_DESC_MUXED(WEMUX3, 31);
+ INIT_GPIO_DESC_MUXED(WEMUX3, 113);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 38);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 53);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 40);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 36);
}
#else
static inline void pxa27x_mfp_init(void) {}
@@ -300,7 +330,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
int i;
- for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
@@ -315,7 +345,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
{
int i;
- for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
@@ -348,7 +378,7 @@ static int __init pxa2xx_mfp_init(void)
pxa27x_mfp_init();
/* initialize gafr_run[], pgsr_lpm[] from existing values */
- for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
return sysdev_class_register(&pxa2xx_mfp_sysclass);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 782903fe9c6..2b427e015b6 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -34,7 +34,7 @@
#include <linux/irq.h>
#include <linux/pda_power.h>
#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
+#include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
@@ -46,6 +46,9 @@
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <media/soc_camera.h>
#include <mach/mioa701.h>
@@ -54,10 +57,11 @@
static unsigned long mioa701_pin_config[] = {
/* Mio global */
- MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
/* Backlight PWM 0 */
GPIO16_PWM0_OUT,
@@ -74,7 +78,7 @@ static unsigned long mioa701_pin_config[] = {
MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
/* USB */
- MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+ MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
/* LCD */
@@ -98,12 +102,29 @@ static unsigned long mioa701_pin_config[] = {
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
+ /* QCI */
+ GPIO12_CIF_DD_7,
+ GPIO17_CIF_DD_6,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO81_CIF_DD_0,
+ GPIO82_CIF_DD_5,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+
/* Bluetooth */
+ MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
GPIO44_BTUART_CTS,
GPIO42_BTUART_RXD,
GPIO45_BTUART_RTS,
GPIO43_BTUART_TXD,
MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
/* GPS */
MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
@@ -151,16 +172,16 @@ static unsigned long mioa701_pin_config[] = {
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
/* Unknown */
- MFP_CFG_IN(GPIO14, AF0),
MFP_CFG_IN(GPIO20, AF0),
MFP_CFG_IN(GPIO21, AF0),
MFP_CFG_IN(GPIO33, AF0),
MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
- MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
- MFP_CFG_IN(GPIO80, AF0),
- MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
MFP_CFG_IN(GPIO96, AF0),
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
};
@@ -407,7 +428,7 @@ static void udc_power_command(int cmd)
static int is_usb_connected(void)
{
- return !!gpio_get_value(GPIO13_USB_DETECT);
+ return !gpio_get_value(GPIO13_nUSB_DETECT);
}
static struct pxa2xx_udc_mach_info mioa701_udc_info = {
@@ -659,13 +680,19 @@ static char *supplicants[] = {
"mioa701_battery"
};
+static int is_ac_connected(void)
+{
+ return gpio_get_value(GPIO96_AC_DETECT);
+}
+
static void mioa701_set_charge(int flags)
{
- gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+ gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
}
static struct pda_power_pdata power_pdata = {
- .is_ac_online = is_usb_connected,
+ .is_ac_online = is_ac_connected,
+ .is_usb_online = is_usb_connected,
.set_charge = mioa701_set_charge,
.supplied_to = supplicants,
.num_supplicants = ARRAY_SIZE(supplicants),
@@ -674,8 +701,15 @@ static struct pda_power_pdata power_pdata = {
static struct resource power_resources[] = {
[0] = {
.name = "ac",
- .start = gpio_to_irq(GPIO13_USB_DETECT),
- .end = gpio_to_irq(GPIO13_USB_DETECT),
+ .start = gpio_to_irq(GPIO96_AC_DETECT),
+ .end = gpio_to_irq(GPIO96_AC_DETECT),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+ [1] = {
+ .name = "usb",
+ .start = gpio_to_irq(GPIO13_nUSB_DETECT),
+ .end = gpio_to_irq(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
@@ -691,120 +725,43 @@ static struct platform_device power_dev = {
},
};
-#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
-static struct wm97xx *battery_wm;
-
-static enum power_supply_property battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, /* Necessary for apm */
+static struct wm97xx_batt_info mioa701_battery_data = {
+ .batt_aux = WM97XX_AUX_ID1,
+ .temp_aux = -1,
+ .charge_gpio = -1,
+ .min_voltage = 0xc00,
+ .max_voltage = 0xfc0,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
+ .batt_div = 1,
+ .batt_mult = 1,
+ .batt_name = "mioa701_battery",
};
-static int get_battery_voltage(void)
-{
- int adc = -1;
-
- if (battery_wm)
- adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
- return adc;
-}
-
-static int get_battery_status(struct power_supply *b)
-{
- int status;
-
- if (is_usb_connected())
- status = POWER_SUPPLY_STATUS_CHARGING;
- else
- status = POWER_SUPPLY_STATUS_DISCHARGING;
-
- return status;
-}
-
-static int get_property(struct power_supply *b,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- int rc = 0;
-
- switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- val->intval = get_battery_status(b);
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- val->intval = 0xfd0;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
- val->intval = 0xc00;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- val->intval = get_battery_voltage();
- break;
- case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
- val->intval = 100;
- break;
- default:
- val->intval = -1;
- rc = -1;
- }
-
- return rc;
+/*
+ * Camera interface
+ */
+struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 5000,
};
-static struct power_supply battery_ps = {
- .name = "mioa701_battery",
- .type = POWER_SUPPLY_TYPE_BATTERY,
- .get_property = get_property,
- .properties = battery_props,
- .num_properties = ARRAY_SIZE(battery_props),
+static struct soc_camera_link iclink = {
+ .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
};
-static int battery_probe(struct platform_device *pdev)
-{
- struct wm97xx *wm = platform_get_drvdata(pdev);
- int rc;
-
- battery_wm = wm;
-
- rc = power_supply_register(NULL, &battery_ps);
- if (rc)
- dev_err(&pdev->dev,
- "Could not register mioa701 battery -> %d\n", rc);
- return rc;
-}
-
-static int battery_remove(struct platform_device *pdev)
-{
- battery_wm = NULL;
- return 0;
-}
-
-static struct platform_driver mioa701_battery_driver = {
- .driver = {
- .name = "wm97xx-battery",
+/* Board I2C devices. */
+static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+ {
+ /* Must initialize before the camera(s) */
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+ .platform_data = &iclink,
},
- .probe = battery_probe,
- .remove = battery_remove
};
-static int __init mioa701_battery_init(void)
-{
- int rc;
-
- rc = platform_driver_register(&mioa701_battery_driver);
- if (rc)
- printk(KERN_ERR "Could not register mioa701 battery driver\n");
- return rc;
-}
-
-#else
-static int __init mioa701_battery_init(void)
-{
- return 0;
-}
-#endif
+struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
/*
* Mio global
@@ -851,17 +808,17 @@ static void mioa701_machine_exit(void);
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
- gpio_set_value(GPIO18_POWEROFF, 1);
+ arm_machine_restart('s');
}
static void mioa701_restart(char c)
{
mioa701_machine_exit();
- arm_machine_restart(c);
+ arm_machine_restart('s');
}
struct gpio_ress global_gpios[] = {
- MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+ MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
};
@@ -879,12 +836,16 @@ static void __init mioa701_machine_init(void)
set_pxa_fb_info(&mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
+ wm97xx_bat_set_pdata(&mioa701_battery_data);
udc_init();
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
- mioa701_battery_init();
+
+ pxa_set_i2c_info(&i2c_pdata);
+ pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
}
static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index f601425f1b1..1e751545228 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -55,6 +55,10 @@ static unsigned long pcm990_pin_config[] __initdata = {
GPIO89_USBH1_PEN,
/* PWM0 */
GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
};
/*
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 2e3bd8b1523..ae88855bf97 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -20,6 +20,7 @@
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -413,9 +414,40 @@ static struct pxafb_mach_info poodle_fb_info = {
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
+ &sharpsl_rom_device,
};
static void poodle_poweroff(void)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 344b3282caf..6c57522e246 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -36,12 +36,6 @@
#include "devices.h"
#include "clock.h"
-int cpu_is_pxa26x(void)
-{
- return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
-}
-EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
-
/*
* Various clock factors driven by the CCCR register.
*/
@@ -319,13 +313,21 @@ void __init pxa25x_init_irq(void)
pxa_init_gpio(85, pxa25x_set_wake);
}
+#ifdef CONFIG_CPU_PXA26x
+void __init pxa26x_init_irq(void)
+{
+ pxa_init_irq(32, pxa25x_set_wake);
+ pxa_init_gpio(90, pxa25x_set_wake);
+}
+#endif
+
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
&pxa_device_i2s,
- &pxa_device_rtc,
+ &sa1100_device_rtc,
&pxa25x_device_ssp,
&pxa25x_device_nssp,
&pxa25x_device_assp,
@@ -371,7 +373,7 @@ static int __init pxa25x_init(void)
}
/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
- if (cpu_is_pxa255() || cpu_is_pxa26x()) {
+ if (cpu_is_pxa255()) {
clks_register(&pxa25x_hwuart_clkreg, 1);
ret = platform_device_register(&pxa_device_hwuart);
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 15c8e5b9f9b..411bec54fdc 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -332,38 +332,18 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
- pxa_init_gpio(128, pxa27x_set_wake);
+ pxa_init_gpio(121, pxa27x_set_wake);
}
/*
* device registration specific to PXA27x.
*/
-
-static struct resource i2c_power_resources[] = {
- {
- .start = 0x40f00180,
- .end = 0x40f001a3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa27x_device_i2c_power = {
- .name = "pxa2xx-i2c",
- .id = 1,
- .resource = i2c_power_resources,
- .num_resources = ARRAY_SIZE(i2c_power_resources),
-};
-
void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
local_irq_disable();
PCFR |= PCFR_PI2CEN;
local_irq_enable();
- pxa27x_device_i2c_power.dev.platform_data = info;
+ pxa_register_device(&pxa27x_device_i2c_power, info);
}
static struct platform_device *devices[] __initdata = {
@@ -372,8 +352,8 @@ static struct platform_device *devices[] __initdata = {
&pxa_device_btuart,
&pxa_device_stuart,
&pxa_device_i2s,
+ &sa1100_device_rtc,
&pxa_device_rtc,
- &pxa27x_device_i2c_power,
&pxa27x_device_ssp1,
&pxa27x_device_ssp2,
&pxa27x_device_ssp3,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b7e53829d37..490893824e7 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -29,6 +29,7 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/ssp.h>
+#include <mach/i2c.h>
#include "generic.h"
#include "devices.h"
@@ -544,28 +545,9 @@ void __init pxa3xx_init_irq(void)
* device registration specific to PXA3xx.
*/
-static struct resource i2c_power_resources[] = {
- {
- .start = 0x40f500c0,
- .end = 0x40f500d3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
- .name = "pxa2xx-i2c",
- .id = 1,
- .resource = i2c_power_resources,
- .num_resources = ARRAY_SIZE(i2c_power_resources),
-};
-
void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
- pxa3xx_device_i2c_power.dev.platform_data = info;
+ pxa_register_device(&pxa3xx_device_i2c_power, info);
}
static struct platform_device *devices[] __initdata = {
@@ -574,6 +556,7 @@ static struct platform_device *devices[] __initdata = {
&pxa_device_btuart,
&pxa_device_stuart,
&pxa_device_i2s,
+ &sa1100_device_rtc,
&pxa_device_rtc,
&pxa27x_device_ssp1,
&pxa27x_device_ssp2,
@@ -581,7 +564,6 @@ static struct platform_device *devices[] __initdata = {
&pxa3xx_device_ssp4,
&pxa27x_device_pwm0,
&pxa27x_device_pwm1,
- &pxa3xx_device_i2c_power,
};
static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3be76ee2bdb..7299d87a1cb 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -22,6 +22,7 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/backlight.h>
#include <linux/io.h>
@@ -122,6 +123,10 @@ static unsigned long spitz_pin_config[] __initdata = {
GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
};
@@ -609,10 +614,41 @@ static struct pxafb_mach_info spitz_pxafb_info = {
};
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00140000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
&spitzkbd_device,
&spitzled_device,
+ &sharpsl_rom_device,
};
static void spitz_poweroff(void)
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 224897a67d1..3332e5d0356 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -25,6 +25,7 @@
#include <linux/mfd/tmio.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
@@ -733,6 +734,45 @@ static void tosa_tc6393xb_teardown(struct platform_device *dev)
gpio_free(TOSA_GPIO_CARD_VCC_ON);
}
+#ifdef CONFIG_MFD_TC6393XB
+static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
+ {
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 0x002cdf00,/* PLL divisor */
+ .left_margin = 0x004c,
+ .right_margin = 0x005b,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },{
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 0x00e7f203,/* PLL divisor */
+ .left_margin = 0x0024,
+ .right_margin = 0x002f,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
+};
+
+static struct tmio_fb_data tosa_tc6393xb_fb_config = {
+ .lcd_set_power = tc6393xb_lcd_set_power,
+ .lcd_mode = tc6393xb_lcd_mode,
+ .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
+ .modes = &tosa_tc6393xb_lcd_mode[0],
+ .height = 82,
+ .width = 60,
+};
+#endif
+
static struct tc6393xb_platform_data tosa_tc6393xb_data = {
.scr_pll2cr = 0x0cc1,
.scr_gper = 0x3300,
@@ -748,6 +788,9 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = {
.resume = tosa_tc6393xb_resume,
.nand_data = &tosa_tc6393xb_nand_config,
+#ifdef CONFIG_MFD_TC6393XB
+ .fb_data = &tosa_tc6393xb_fb_config,
+#endif
.resume_restore = 1,
};
@@ -789,6 +832,36 @@ static struct spi_board_info spi_board_info[] __initdata = {
},
};
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00160000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
@@ -798,6 +871,7 @@ static struct platform_device *devices[] __initdata = {
&tosa_gpio_keys_device,
&tosaled_device,
&tosa_bt_device,
+ &sharpsl_rom_device,
};
static void tosa_poweroff(void)
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 81380443346..218d2001f1d 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
@@ -25,7 +26,6 @@
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/audio.h>
-#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/zylonite.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 0f244744daa..28e4e623780 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -16,8 +16,8 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/gpio.h>
-#include <mach/gpio.h>
#include <mach/mfp-pxa320.h>
#include <mach/zylonite.h>