diff options
Diffstat (limited to 'arch/arm/mach-pxa')
| -rw-r--r-- | arch/arm/mach-pxa/cm-x2xx.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/cm-x300.c | 58 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/hx4700.c | 70 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/corgi.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/magician.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/memory.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/pm.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/pxa27x-udc.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/magician.c | 57 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/mfp-pxa2xx.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/mioa701.c | 70 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/palmz72.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pm.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa25x.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa27x.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa3xx.c | 14 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/raumfeld.c | 36 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/saarb.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/sleep.S | 55 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/zeus.c | 3 |
20 files changed, 151 insertions, 254 deletions
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index a1099678247..bc55d07566c 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -518,4 +518,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .init_irq = cmx2xx_init_irq, .timer = &pxa_timer, .init_machine = cmx2xx_init, +#ifdef CONFIG_PCI + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b2248e76ec8..b199596f9c3 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -12,6 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/module.h> #include <linux/kernel.h> @@ -161,10 +162,10 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = { GPIO99_GPIO, /* Ethernet IRQ */ /* RTC GPIOs */ - GPIO95_GPIO, /* RTC CS */ - GPIO96_GPIO, /* RTC WR */ - GPIO97_GPIO, /* RTC RD */ - GPIO98_GPIO, /* RTC IO */ + GPIO95_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC CS */ + GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC WR */ + GPIO97_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC RD */ + GPIO98_GPIO, /* RTC IO */ /* Standard I2C */ GPIO21_I2C_SCL, @@ -484,14 +485,13 @@ static int cm_x300_ulpi_phy_reset(void) int err; /* reset the PHY */ - err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset"); + err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW, + "ulpi reset"); if (err) { - pr_err("%s: failed to request ULPI reset GPIO: %d\n", - __func__, err); + pr_err("failed to request ULPI reset GPIO: %d\n", err); return err; } - gpio_direction_output(GPIO_ULPI_PHY_RST, 0); msleep(10); gpio_set_value(GPIO_ULPI_PHY_RST, 1); msleep(10); @@ -510,8 +510,7 @@ static inline int cm_x300_u2d_init(struct device *dev) pout_clk = clk_get(NULL, "CLK_POUT"); if (IS_ERR(pout_clk)) { err = PTR_ERR(pout_clk); - pr_err("%s: failed to get CLK_POUT: %d\n", - __func__, err); + pr_err("failed to get CLK_POUT: %d\n", err); return err; } clk_enable(pout_clk); @@ -768,39 +767,36 @@ static void __init cm_x300_init_da9030(void) irq_set_irq_wake(IRQ_WAKEUP0, 1); } +/* wi2wi gpio setting for system_rev >= 130 */ +static struct gpio cm_x300_wi2wi_gpios[] __initdata = { + { 71, GPIOF_OUT_INIT_HIGH, "wlan en" }, + { 70, GPIOF_OUT_INIT_HIGH, "bt reset" }, +}; + static void __init cm_x300_init_wi2wi(void) { int bt_reset, wlan_en; int err; if (system_rev < 130) { - wlan_en = 77; - bt_reset = 78; - } else { - wlan_en = 71; - bt_reset = 70; + cm_x300_wi2wi_gpios[0].gpio = 77; /* wlan en */ + cm_x300_wi2wi_gpios[1].gpio = 78; /* bt reset */ } /* Libertas and CSR reset */ - err = gpio_request(wlan_en, "wlan en"); + err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios)); if (err) { - pr_err("CM-X300: failed to request wlan en gpio: %d\n", err); - } else { - gpio_direction_output(wlan_en, 1); - gpio_free(wlan_en); + pr_err("failed to request wifi/bt gpios: %d\n", err); + return; } - err = gpio_request(bt_reset, "bt reset"); - if (err) { - pr_err("CM-X300: failed to request bt reset gpio: %d\n", err); - } else { - gpio_direction_output(bt_reset, 1); - udelay(10); - gpio_set_value(bt_reset, 0); - udelay(10); - gpio_set_value(bt_reset, 1); - gpio_free(bt_reset); - } + udelay(10); + gpio_set_value(bt_reset, 0); + udelay(10); + gpio_set_value(bt_reset, 1); + + gpio_free(wlan_en); + gpio_free(bt_reset); } /* MFP */ diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index f941a495a4a..99960a1814e 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -135,42 +135,6 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO66_GPIO, /* nSDIO_IRQ */ }; -#define HX4700_GPIO_IN(num, _desc) \ - { .gpio = (num), .dir = 0, .desc = (_desc) } -#define HX4700_GPIO_OUT(num, _init, _desc) \ - { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } -struct gpio_ress { - unsigned gpio : 8; - unsigned dir : 1; - unsigned init : 1; - char *desc; -}; - -static int hx4700_gpio_request(struct gpio_ress *gpios, int size) -{ - int i, rc = 0; - int gpio; - int dir; - - for (i = 0; (!rc) && (i < size); i++) { - gpio = gpios[i].gpio; - dir = gpios[i].dir; - rc = gpio_request(gpio, gpios[i].desc); - if (rc) { - pr_err("Error requesting GPIO %d(%s) : %d\n", - gpio, gpios[i].desc, rc); - continue; - } - if (dir) - gpio_direction_output(gpio, gpios[i].init); - else - gpio_direction_input(gpio); - } - while ((rc) && (--i >= 0)) - gpio_free(gpios[i].gpio); - return rc; -} - /* * IRDA */ @@ -829,26 +793,30 @@ static struct platform_device *devices[] __initdata = { &pcmcia, }; -static struct gpio_ress global_gpios[] = { - HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"), - HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"), - HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"), - HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1, 1, "LCD_PC1"), - HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET, 1, "LCD_RESET"), - HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1, 1, "LCD_SLIN1"), - HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN, 1, "LCD_SQN"), - HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"), - HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"), - HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON, 1, "RS232_ON"), - HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET, 1, "ASIC3_nRESET"), - HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET, 1, "EUART_RESET"), - HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON, 1, "nIR_EN"), +static struct gpio global_gpios[] = { + { GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" }, + { GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" }, + { GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" }, + { GPIO59_HX4700_LCD_PC1, GPIOF_OUT_INIT_HIGH, "LCD_PC1" }, + { GPIO62_HX4700_LCD_nRESET, GPIOF_OUT_INIT_HIGH, "LCD_RESET" }, + { GPIO70_HX4700_LCD_SLIN1, GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" }, + { GPIO84_HX4700_LCD_SQN, GPIOF_OUT_INIT_HIGH, "LCD_SQN" }, + { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, + { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, + { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, + { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, + { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, + { GPIO105_HX4700_nIR_ON, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, }; static void __init hx4700_init(void) { + int ret; + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); - hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios)); + ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); + if (ret) + pr_err ("hx4700: Failed to request GPIOs.\n"); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 0011055bc3f..5dfd1195a5a 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -34,7 +34,7 @@ #define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */ #define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */ #define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */ -#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */ +#define CORGI_GPIO_IR_ON (22) /* Enable IR Transceiver */ #define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */ #define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */ #define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */ diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 0a2efcf7947..7cbfc5d3f9d 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -12,6 +12,7 @@ #ifndef _MAGICIAN_H_ #define _MAGICIAN_H_ +#include <linux/gpio.h> #include <mach/irqs.h> /* @@ -77,7 +78,7 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ +#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index 07734f37f8f..d05a59727d6 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -17,8 +17,4 @@ */ #define PLAT_PHYS_OFFSET UL(0xa0000000) -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define ARM_DMA_ZONE_SIZE SZ_64M -#endif - #endif diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index f15afe01299..51558bcee99 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; /* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int, long); -extern void pxa27x_cpu_suspend(unsigned int, long); +extern int pxa25x_finish_suspend(unsigned long); +extern int pxa27x_finish_suspend(unsigned long); extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h index ab1443f8bd8..4cf28f67070 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h @@ -56,9 +56,9 @@ #define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ #define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ #define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt Falling Edge Interrupt Enable */ #define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */ diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index e1920572948..0e42798942f 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -344,22 +344,14 @@ static struct pxafb_mach_info samsung_info = { * Backlight */ +static struct gpio magician_bl_gpios[] = { + { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, + { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, +}; + static int magician_backlight_init(struct device *dev) { - int ret; - - ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER"); - if (ret) - goto err; - ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2"); - if (ret) - goto err2; - return 0; - -err2: - gpio_free(EGPIO_MAGICIAN_BL_POWER); -err: - return ret; + return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios)); } static int magician_backlight_notify(struct device *dev, int brightness) @@ -376,8 +368,7 @@ static int magician_backlight_notify(struct device *dev, int brightness) static void magician_backlight_exit(struct device *dev) { - gpio_free(EGPIO_MAGICIAN_BL_POWER); - gpio_free(EGPIO_MAGICIAN_BL_POWER2); + gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); } static struct platform_pwm_backlight_data backlight_data = { @@ -712,16 +703,25 @@ static struct platform_device *devices[] __initdata = { &leds_gpio, }; +static struct gpio magician_global_gpios[] = { + { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, + { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, + { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, + { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, + { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" }, + { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, +}; + static void __init magician_init(void) { void __iomem *cpld; int lcd_select; int err; - gpio_request(GPIO13_MAGICIAN_CPLD_IRQ, "CPLD_IRQ"); - gpio_request(GPIO107_MAGICIAN_DS1WM_IRQ, "DS1WM_IRQ"); - pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); + err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios)); + if (err) + pr_err("magician: Failed to request GPIOs: %d\n", err); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); @@ -729,11 +729,7 @@ static void __init magician_init(void) platform_add_devices(ARRAY_AND_SIZE(devices)); - err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN"); - if (!err) { - gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1); - pxa_set_ficp_info(&magician_ficp_info); - } + pxa_set_ficp_info(&magician_ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(&i2c_info); pxa_set_mci_info(&magician_mci_info); @@ -747,16 +743,9 @@ static void __init magician_init(void) system_rev = board_id & 0x7; lcd_select = board_id & 0x8; pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); - if (lcd_select && (system_rev < 3)) { - gpio_request(GPIO75_MAGICIAN_SAMSUNG_POWER, "SAMSUNG_POWER"); - gpio_direction_output(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); - } - gpio_request(GPIO104_MAGICIAN_LCD_POWER_1, "LCD_POWER_1"); - gpio_request(GPIO105_MAGICIAN_LCD_POWER_2, "LCD_POWER_2"); - gpio_request(GPIO106_MAGICIAN_LCD_POWER_3, "LCD_POWER_3"); - gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); - gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); - gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); + if (lcd_select && (system_rev < 3)) + gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, + GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER"); pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 87ae3129f4f..b27544bcafc 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void) if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && (GPDR(i) & GPIO_bit(i))) { if (GPLR(i) & GPIO_bit(i)) - PGSR(i) |= GPIO_bit(i); + PGSR(gpio_to_bank(i)) |= GPIO_bit(i); else - PGSR(i) &= ~GPIO_bit(i); + PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i); } } diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index e3470137c93..aa67637ae41 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -177,50 +177,6 @@ static unsigned long mioa701_pin_config[] = { MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), }; -#define MIO_GPIO_IN(num, _desc) \ - { .gpio = (num), .dir = 0, .desc = (_desc) } -#define MIO_GPIO_OUT(num, _init, _desc) \ - { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } -struct gpio_ress { - unsigned gpio : 8; - unsigned dir : 1; - unsigned init : 1; - char *desc; -}; - -static int mio_gpio_request(struct gpio_ress *gpios, int size) -{ - int i, rc = 0; - int gpio; - int dir; - - for (i = 0; (!rc) && (i < size); i++) { - gpio = gpios[i].gpio; - dir = gpios[i].dir; - rc = gpio_request(gpio, gpios[i].desc); - if (rc) { - printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n", - gpio, gpios[i].desc, rc); - continue; - } - if (dir) - gpio_direction_output(gpio, gpios[i].init); - else - gpio_direction_input(gpio); - } - while ((rc) && (--i >= 0)) - gpio_free(gpios[i].gpio); - return rc; -} - -static void mio_gpio_free(struct gpio_ress *gpios, int size) -{ - int i; - - for (i = 0; i < size; i++) - gpio_free(gpios[i].gpio); -} - /* LCD Screen and Backlight */ static struct platform_pwm_backlight_data mioa701_backlight_data = { .pwm_id = 0, @@ -346,16 +302,16 @@ irqreturn_t gsm_on_irq(int irq, void *p) return IRQ_HANDLED; } -struct gpio_ress gsm_gpios[] = { - MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"), - MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"), +static struct gpio gsm_gpios[] = { + { GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" }, + { GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" }, }; static int __init gsm_init(void) { int rc; - rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios)); + rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios)); if (rc) goto err_gpio; rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq, @@ -369,7 +325,7 @@ static int __init gsm_init(void) err_irq: printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n"); - mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); + gpio_free_array(ARRAY_AND_SIZE(gsm_gpios)); err_gpio: printk(KERN_ERR "Mioa701: gsm not available\n"); return rc; @@ -378,7 +334,7 @@ err_gpio: static void gsm_exit(void) { free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL); - mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); + gpio_free_array(ARRAY_AND_SIZE(gsm_gpios)); } /* @@ -749,14 +705,16 @@ static void mioa701_restart(char c, const char *cmd) arm_machine_restart('s', cmd); } -static struct gpio_ress global_gpios[] = { - MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"), - MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), - MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"), +static struct gpio global_gpios[] = { + { GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" }, + { GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" }, + { GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" }, }; static void __init mioa701_machine_init(void) { + int rc; + PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */ PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE; RTTR = 32768 - 1; /* Reset crazy WinCE value */ @@ -766,7 +724,9 @@ static void __init mioa701_machine_init(void) pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); + rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); + if (rc) + pr_err("MioA701: Failed to request GPIOs: %d", rc); bootstrap_init(); pxa_set_fb_info(NULL, &mioa701_pxafb_info); pxa_set_mci_info(&mioa701_mci_info); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 65f24f0b77e..5a5329bc33f 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -33,6 +33,7 @@ #include <linux/i2c-gpio.h> #include <asm/mach-types.h> +#include <asm/suspend.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 51e1583265b..37178a8559b 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -42,7 +42,6 @@ int pxa_pm_enter(suspend_state_t state) /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); - cpu_init(); if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fed363cec9c..9c434d21a27 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,6 +25,7 @@ #include <linux/irq.h> #include <asm/mach/map.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/gpio.h> @@ -244,7 +245,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 2fecbec58d8..9d2400b5f50 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include <asm/mach/map.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/suspend.h> #include <mach/irqs.h> #include <mach/gpio.h> #include <mach/pxa27x.h> @@ -284,6 +285,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save) void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); +#ifndef CONFIG_IWMMXT + u64 acc0; + + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -299,7 +305,10 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(pwrmode, pxa27x_finish_suspend); +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif break; } } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 8521d7d6f1d..ef1c56a67af 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,6 +24,7 @@ #include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/gpio.h> #include <mach/pxa3xx-regs.h> @@ -141,8 +142,13 @@ static void pxa3xx_cpu_pm_suspend(void) { volatile unsigned long *p = (volatile void *)0xc0000000; unsigned long saved_data = *p; +#ifndef CONFIG_IWMMXT + u64 acc0; - extern void pxa3xx_cpu_suspend(long); + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif + + extern int pxa3xx_finish_suspend(unsigned long); /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); @@ -162,11 +168,15 @@ static void pxa3xx_cpu_pm_suspend(void) /* overwrite with the resume address */ *p = virt_to_phys(cpu_resume); - pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, pxa3xx_finish_suspend); *p = saved_data; AD3ER = 0; + +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif } static void pxa3xx_cpu_pm_enter(suspend_state_t state) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d130f77b6d1..2f37d43f51b 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = { .xres = 480, .yres = 272, .bpp = 16, - .hsync_len = 4, + .hsync_len = 41, .left_margin = 2, .right_margin = 1, - .vsync_len = 1, + .vsync_len = 10, .upper_margin = 3, .lower_margin = 1, .sync = 0, @@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void) { int ret; - pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - - /* Earlier devices had the backlight regulator controlled - * via PWM, later versions use another controller for that */ - if ((system_rev & 0xff) < 2) { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - platform_device_register(&raumfeld_pwm_backlight_device); - } else - platform_device_register(&raumfeld_lt3593_device); - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) pr_warning("Unable to request GPIO_TFT_VA_EN\n"); else gpio_direction_output(GPIO_TFT_VA_EN, 1); + msleep(100); + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); if (ret < 0) pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); else gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); + /* Hardware revision 2 has the backlight regulator controlled + * by an LT3593, earlier and later devices use PWM for that. */ + if ((system_rev & 0xff) == 2) { + platform_device_register(&raumfeld_lt3593_device); + } else { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } + + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); platform_device_register(&pxa3xx_device_gcu); } @@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = { #define SPI_AK4104 \ { \ - .modalias = "ak4104", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ + .modalias = "ak4104-codec", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ .controller_data = (void *) GPIO_SPDIF_CS, \ } diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index 9322fe527c7..e53a3334c94 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -104,7 +104,7 @@ static void __init saarb_init(void) MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") .boot_params = 0xa0000100, - .map_io = pxa_map_io, + .map_io = pxa3xx_map_io, .nr_irqs = SAARB_NR_IRQS, .init_irq = pxa95x_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 6f5368899d8..1e544be9905 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -24,20 +24,9 @@ #ifdef CONFIG_PXA3xx /* - * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4) - * - * r0 = v:p offset + * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4) */ -ENTRY(pxa3xx_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r1, r0 - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend - +ENTRY(pxa3xx_finish_suspend) mov r0, #0x06 @ S2D3C4 mode mcr p14, 0, r0, c7, c0, 0 @ enter sleep @@ -46,28 +35,18 @@ ENTRY(pxa3xx_cpu_suspend) #ifdef CONFIG_PXA27x /* - * pxa27x_cpu_suspend() + * pxa27x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa27x_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend - +ENTRY(pxa27x_finish_suspend) @ Put the processor to sleep @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -99,21 +78,16 @@ ENTRY(pxa27x_cpu_suspend) #ifdef CONFIG_PXA25x /* - * pxa25x_cpu_suspend() + * pxa25x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa25x_cpu_suspend) - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend +ENTRY(pxa25x_finish_suspend) @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -195,16 +169,3 @@ pxa_cpu_do_suspend: mcr p14, 0, r1, c7, c0, 0 @ PWRMODE 20: b 20b @ loop waiting for sleep - -/* - * pxa_cpu_resume() - * - * entry point from bootloader into kernel during resume - */ - .align 5 -pxa_cpu_resume: - ldmfd sp!, {r2, r3} -#ifndef CONFIG_IWMMXT - mar acc0, r2, r3 -#endif - ldmfd sp!, {r4 - r12, pc} @ return to caller diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 00363c7ac18..9b99cc164de 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -31,6 +31,7 @@ #include <linux/can/platform/mcp251x.h> #include <asm/mach-types.h> +#include <asm/suspend.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -676,7 +677,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { static void zeus_power_off(void) { local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend); } #else #define zeus_power_off NULL |