diff options
Diffstat (limited to 'arch/arm/mach-pxa')
128 files changed, 9333 insertions, 337 deletions
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c index 254892ac30c..5c67b188a3b 100644 --- a/arch/arm/mach-pxa/akita-ioexp.c +++ b/arch/arm/mach-pxa/akita-ioexp.c @@ -19,7 +19,7 @@ #include <linux/i2c.h> #include <linux/slab.h> #include <linux/workqueue.h> -#include <asm/arch/akita.h> +#include <mach/akita.h> /* MAX7310 Regiser Map */ #define MAX7310_INPUT 0x00 diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index 630063ffa6f..c01eea88f78 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -12,9 +12,9 @@ #include <linux/platform_device.h> #include <linux/delay.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/hardware.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 31f5bd411ce..2d5bcea1e52 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -22,7 +22,7 @@ #include <linux/gpio.h> #include <asm/mach/pci.h> -#include <asm/arch/pxa-regs.h> +#include <mach/pxa-regs.h> #include <asm/mach-types.h> #include <asm/hardware/it8152.h> diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 402e807eae5..af003a26953 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -23,14 +23,14 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/audio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/ohci.h> -#include <asm/arch/mmc.h> -#include <asm/arch/bitfield.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pxa-regs.h> +#include <mach/audio.h> +#include <mach/pxafb.h> +#include <mach/ohci.h> +#include <mach/mmc.h> +#include <mach/bitfield.h> #include <asm/hardware/it8152.h> diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c index 574839d7c13..abce13c846c 100644 --- a/arch/arm/mach-pxa/colibri.c +++ b/arch/arm/mach-pxa/colibri.c @@ -21,16 +21,16 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/colibri.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/colibri.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index e58504edb14..123a950db46 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -26,7 +26,7 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/system.h> @@ -35,14 +35,14 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/irda.h> -#include <asm/arch/mmc.h> -#include <asm/arch/udc.h> -#include <asm/arch/corgi.h> -#include <asm/arch/sharpsl.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/irda.h> +#include <mach/mmc.h> +#include <mach/udc.h> +#include <mach/corgi.h> +#include <mach/sharpsl.h> #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 9328df37afd..311baf149b0 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -20,12 +20,12 @@ #include <linux/platform_device.h> #include <linux/module.h> #include <linux/string.h> -#include <asm/arch/akita.h> -#include <asm/arch/corgi.h> -#include <asm/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/sharpsl.h> -#include <asm/arch/spitz.h> +#include <mach/akita.h> +#include <mach/corgi.h> +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/sharpsl.h> +#include <mach/spitz.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index e91c0f26c41..35bbfccd2df 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -20,14 +20,14 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/hardware/scoop.h> -#include <asm/arch/sharpsl.h> -#include <asm/arch/corgi.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> +#include <mach/sharpsl.h> +#include <mach/corgi.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index eccc45d21f7..8e2f2215c4b 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -16,13 +16,13 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/platform_device.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/arch/ssp.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/regs-ssp.h> +#include <mach/ssp.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/regs-ssp.h> #include "sharpsl.h" static DEFINE_SPINLOCK(corgi_ssp_lock); diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c index fb9ba1ab282..6f5569bac13 100644 --- a/arch/arm/mach-pxa/cpu-pxa.c +++ b/arch/arm/mach-pxa/cpu-pxa.c @@ -37,9 +37,9 @@ #include <linux/init.h> #include <linux/cpufreq.h> -#include <asm/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> #ifdef DEBUG static unsigned int freq_debug; diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 84489dc51d8..35736fc0863 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,19 +4,19 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <asm/arch/gpio.h> -#include <asm/arch/udc.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/mmc.h> -#include <asm/arch/irda.h> -#include <asm/arch/i2c.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/ohci.h> -#include <asm/arch/pxa27x_keypad.h> -#include <asm/arch/pxa2xx_spi.h> -#include <asm/arch/camera.h> -#include <asm/arch/audio.h> -#include <asm/arch/pxa3xx_nand.h> +#include <mach/gpio.h> +#include <mach/udc.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <mach/irda.h> +#include <mach/i2c.h> +#include <mach/mfp-pxa27x.h> +#include <mach/ohci.h> +#include <mach/pxa27x_keypad.h> +#include <mach/pxa2xx_spi.h> +#include <mach/camera.h> +#include <mach/audio.h> +#include <mach/pxa3xx_nand.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c index 3215316d7b0..c0be17e0ab8 100644 --- a/arch/arm/mach-pxa/dma.c +++ b/arch/arm/mach-pxa/dma.c @@ -20,10 +20,10 @@ #include <asm/system.h> #include <asm/irq.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/dma.h> -#include <asm/arch/pxa-regs.h> +#include <mach/pxa-regs.h> struct dma_channel { char *name; diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c index 16c02363062..263884165f5 100644 --- a/arch/arm/mach-pxa/e400_lcd.c +++ b/arch/arm/mach-pxa/e400_lcd.c @@ -14,8 +14,8 @@ #include <linux/module.h> #include <asm/mach-types.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxafb.h> +#include <mach/pxa-regs.h> +#include <mach/pxafb.h> static struct pxafb_mode_info e400_pxafb_mode_info = { .pixclock = 140703, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index e5cc6ca63c7..7a0a681a584 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -23,14 +23,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa27x-udc.h> -#include <asm/arch/audio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/ohci.h> -#include <asm/arch/mmc.h> -#include <asm/arch/pxa27x_keypad.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pxa-regs.h> +#include <mach/pxa27x-udc.h> +#include <mach/audio.h> +#include <mach/pxafb.h> +#include <mach/ohci.h> +#include <mach/mmc.h> +#include <mach/pxa27x_keypad.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index c29b7b21c11..03942450885 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -14,7 +14,7 @@ #include <asm/setup.h> #include <asm/mach/arch.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c index 362847a1099..d622c04c0d4 100644 --- a/arch/arm/mach-pxa/eseries_udc.c +++ b/arch/arm/mach-pxa/eseries_udc.c @@ -14,10 +14,10 @@ #include <linux/init.h> #include <linux/device.h> -#include <asm/arch/udc.h> -#include <asm/arch/eseries-gpio.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pxa-regs.h> +#include <mach/udc.h> +#include <mach/eseries-gpio.h> +#include <mach/hardware.h> +#include <mach/pxa-regs.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 0143eed6539..cc3d850cc0b 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -18,13 +18,13 @@ #include <linux/pwm_backlight.h> #include <asm/setup.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/ohci.h> -#include <asm/arch/i2c.h> +#include <mach/pxafb.h> +#include <mach/ohci.h> +#include <mach/i2c.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 36638926c5c..ceaed007636 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -20,13 +20,13 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/reset.h> +#include <mach/pxa-regs.h> +#include <mach/reset.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c index 7d3e16970be..07acc1b2385 100644 --- a/arch/arm/mach-pxa/gpio.c +++ b/arch/arm/mach-pxa/gpio.c @@ -18,10 +18,10 @@ #include <linux/sysdev.h> #include <asm/gpio.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index bdf23975403..c0092472fa5 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -26,7 +26,7 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/sizes.h> @@ -34,13 +34,13 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <asm/arch/mmc.h> -#include <asm/arch/udc.h> -#include <asm/arch/gumstix.h> +#include <mach/mmc.h> +#include <mach/udc.h> +#include <mach/gumstix.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 2637633f916..5aa0270d560 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -25,18 +25,18 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/idp.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/bitfield.h> -#include <asm/arch/mmc.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/idp.h> +#include <mach/pxafb.h> +#include <mach/bitfield.h> +#include <mach/mmc.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h new file mode 100644 index 00000000000..5d8cc1d9cb1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/akita.h @@ -0,0 +1,32 @@ +/* + * Hardware specific definitions for SL-C1000 (Akita) + * + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* Akita IO Expander GPIOs */ + +#define AKITA_IOEXP_RESERVED_7 (1 << 7) +#define AKITA_IOEXP_IR_ON (1 << 6) +#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) +#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) +#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) +#define AKITA_IOEXP_MIC_BIAS (1 << 2) +#define AKITA_IOEXP_RESERVED_1 (1 << 1) +#define AKITA_IOEXP_RESERVED_0 (1 << 0) + +/* Direction Bitfield 0=output 1=input */ +#define AKITA_IOEXP_IO_DIR 0 +/* Default Values */ +#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP) + +extern struct platform_device akitaioexp_device; + +void akita_set_ioexp(struct device *dev, unsigned char bitmask); +void akita_reset_ioexp(struct device *dev, unsigned char bitmask); + diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h new file mode 100644 index 00000000000..f82f96dd105 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -0,0 +1,17 @@ +#ifndef __ASM_ARCH_AUDIO_H__ +#define __ASM_ARCH_AUDIO_H__ + +#include <sound/core.h> +#include <sound/pcm.h> + +typedef struct { + int (*startup)(struct snd_pcm_substream *, void *); + void (*shutdown)(struct snd_pcm_substream *, void *); + void (*suspend)(void *); + void (*resume)(void *); + void *priv; +} pxa2xx_audio_ops_t; + +extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); + +#endif diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h new file mode 100644 index 00000000000..f1f0e3387d9 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/bitfield.h @@ -0,0 +1,113 @@ +/* + * FILE bitfield.h + * + * Version 1.1 + * Author Copyright (c) Marc A. Viredaz, 1998 + * DEC Western Research Laboratory, Palo Alto, CA + * Date April 1998 (April 1997) + * System Advanced RISC Machine (ARM) + * Language C or ARM Assembly + * Purpose Definition of macros to operate on bit fields. + */ + + + +#ifndef __BITFIELD_H +#define __BITFIELD_H + +#ifndef __ASSEMBLY__ +#define UData(Data) ((unsigned long) (Data)) +#else +#define UData(Data) (Data) +#endif + + +/* + * MACRO: Fld + * + * Purpose + * The macro "Fld" encodes a bit field, given its size and its shift value + * with respect to bit 0. + * + * Note + * A more intuitive way to encode bit fields would have been to use their + * mask. However, extracting size and shift value information from a bit + * field's mask is cumbersome and might break the assembler (255-character + * line-size limit). + * + * Input + * Size Size of the bit field, in number of bits. + * Shft Shift value of the bit field with respect to bit 0. + * + * Output + * Fld Encoded bit field. + */ + +#define Fld(Size, Shft) (((Size) << 16) + (Shft)) + + +/* + * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit + * + * Purpose + * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return + * the size, shift value, mask, aligned mask, and first bit of a + * bit field. + * + * Input + * Field Encoded bit field (using the macro "Fld"). + * + * Output + * FSize Size of the bit field, in number of bits. + * FShft Shift value of the bit field with respect to bit 0. + * FMsk Mask for the bit field. + * FAlnMsk Mask for the bit field, aligned on bit 0. + * F1stBit First bit of the bit field. + */ + +#define FSize(Field) ((Field) >> 16) +#define FShft(Field) ((Field) & 0x0000FFFF) +#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) +#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) +#define F1stBit(Field) (UData (1) << FShft (Field)) + + +/* + * MACRO: FInsrt + * + * Purpose + * The macro "FInsrt" inserts a value into a bit field by shifting the + * former appropriately. + * + * Input + * Value Bit-field value. + * Field Encoded bit field (using the macro "Fld"). + * + * Output + * FInsrt Bit-field value positioned appropriately. + */ + +#define FInsrt(Value, Field) \ + (UData (Value) << FShft (Field)) + + +/* + * MACRO: FExtr + * + * Purpose + * The macro "FExtr" extracts the value of a bit field by masking and + * shifting it appropriately. + * + * Input + * Data Data containing the bit-field to be extracted. + * Field Encoded bit field (using the macro "Fld"). + * + * Output + * FExtr Bit-field value. + */ + +#define FExtr(Data, Field) \ + ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) + + +#endif /* __BITFIELD_H */ diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h new file mode 100644 index 00000000000..39516ced8b1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/camera.h @@ -0,0 +1,48 @@ +/* + camera.h - PXA camera driver header file + + Copyright (C) 2003, Intel Corporation + Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define PXA_CAMERA_MASTER 1 +#define PXA_CAMERA_DATAWIDTH_4 2 +#define PXA_CAMERA_DATAWIDTH_5 4 +#define PXA_CAMERA_DATAWIDTH_8 8 +#define PXA_CAMERA_DATAWIDTH_9 0x10 +#define PXA_CAMERA_DATAWIDTH_10 0x20 +#define PXA_CAMERA_PCLK_EN 0x40 +#define PXA_CAMERA_MCLK_EN 0x80 +#define PXA_CAMERA_PCP 0x100 +#define PXA_CAMERA_HSP 0x200 +#define PXA_CAMERA_VSP 0x400 + +struct pxacamera_platform_data { + int (*init)(struct device *); + int (*power)(struct device *, int); + int (*reset)(struct device *, int); + + unsigned long flags; + unsigned long mclk_10khz; +}; + +extern void pxa_set_camera_info(struct pxacamera_platform_data *); + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h new file mode 100644 index 00000000000..2ae373fb567 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -0,0 +1,19 @@ +#ifndef _COLIBRI_H_ +#define _COLIBRI_H_ + +/* physical memory regions */ +#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ +#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ +#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ + +/* virtual memory regions */ +#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ + +/* size of flash */ +#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ + +/* Ethernet Controller Davicom DM9000 */ +#define GPIO_DM9000 114 +#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) + +#endif /* _COLIBRI_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h new file mode 100644 index 00000000000..bf856503baf --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -0,0 +1,109 @@ +/* + * Hardware specific definitions for SL-C7xx series of PDAs + * + * Copyright (c) 2004-2005 Richard Purdie + * + * Based on Sharp's 2.4 kernel patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASM_ARCH_CORGI_H +#define __ASM_ARCH_CORGI_H 1 + + +/* + * Corgi (Non Standard) GPIO Definitions + */ +#define CORGI_GPIO_KEY_INT (0) /* Keyboard Interrupt */ +#define CORGI_GPIO_AC_IN (1) /* Charger Detection */ +#define CORGI_GPIO_WAKEUP (3) /* System wakeup notification? */ +#define CORGI_GPIO_AK_INT (4) /* Headphone Jack Control Interrupt */ +#define CORGI_GPIO_TP_INT (5) /* Touch Panel Interrupt */ +#define CORGI_GPIO_nSD_WP (7) /* SD Write Protect? */ +#define CORGI_GPIO_nSD_DETECT (9) /* MMC/SD Card Detect */ +#define CORGI_GPIO_nSD_INT (10) /* SD Interrupt for SDIO? */ +#define CORGI_GPIO_MAIN_BAT_LOW (11) /* Main Battery Low Notification */ +#define CORGI_GPIO_BAT_COVER (11) /* Battery Cover Detect */ +#define CORGI_GPIO_LED_ORANGE (13) /* Orange LED Control */ +#define CORGI_GPIO_CF_CD (14) /* Compact Flash Card Detect */ +#define CORGI_GPIO_CHRG_FULL (16) /* Charging Complete Notification */ +#define CORGI_GPIO_CF_IRQ (17) /* Compact Flash Interrupt */ +#define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */ +#define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */ +#define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */ +#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */ +#define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */ +#define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */ +#define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */ +#define CORGI_GPIO_DISCHARGE_ON (42) /* Enable battery Discharge */ +#define CORGI_GPIO_CHRG_UKN (43) /* Unknown Charging (Bypass Control?) */ +#define CORGI_GPIO_HSYNC (44) /* LCD HSync Pulse */ +#define CORGI_GPIO_USB_PULLUP (45) /* USB show presence to host */ + + +/* + * Corgi Keyboard Definitions + */ +#define CORGI_KEY_STROBE_NUM (12) +#define CORGI_KEY_SENSE_NUM (8) +#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc) +#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000) +#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26) +#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003) +#define CORGI_GPIO_LOW_SENSE_LSHIFT (6) +#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a)) +#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a)) +#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0) +#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000) +#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f) +#define CORGI_GPIO_KEY_SENSE(a) (58+(a)) +#define CORGI_GPIO_KEY_STROBE(a) (66+(a)) + + +/* + * Corgi Interrupts + */ +#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0) +#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1) +#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3) +#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4) +#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5) +#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) +#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10) +#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11) +#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14) +#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */ +#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) +#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */ + + +/* + * Corgi SCOOP GPIOs and Config + */ +#define CORGI_SCP_LED_GREEN SCOOP_GPCR_PA11 +#define CORGI_SCP_SWA SCOOP_GPCR_PA12 /* Hinge Switch A */ +#define CORGI_SCP_SWB SCOOP_GPCR_PA13 /* Hinge Switch B */ +#define CORGI_SCP_MUTE_L SCOOP_GPCR_PA14 +#define CORGI_SCP_MUTE_R SCOOP_GPCR_PA15 +#define CORGI_SCP_AKIN_PULLUP SCOOP_GPCR_PA16 +#define CORGI_SCP_APM_ON SCOOP_GPCR_PA17 +#define CORGI_SCP_BACKLIGHT_CONT SCOOP_GPCR_PA18 +#define CORGI_SCP_MIC_BIAS SCOOP_GPCR_PA19 + +#define CORGI_SCOOP_IO_DIR ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \ + CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \ + CORGI_SCP_MIC_BIAS ) +#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) + + +/* + * Shared data structures + */ +extern struct platform_device corgiscoop_device; +extern struct platform_device corgissp_device; + +#endif /* __ASM_ARCH_CORGI_H */ + diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S new file mode 100644 index 00000000000..55d6a175ab1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/debug-macro.S @@ -0,0 +1,25 @@ +/* arch/arm/mach-pxa/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include "hardware.h" + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x40000000 @ physical + movne \rx, #io_p2v(0x40000000) @ virtual + orr \rx, \rx, #0x00100000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h new file mode 100644 index 00000000000..955bfe60606 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/dma.h @@ -0,0 +1,50 @@ +/* + * arch/arm/mach-pxa/include/mach/dma.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +/* + * Descriptor structure for PXA's DMA engine + * Note: this structure must always be aligned to a 16-byte boundary. + */ + +typedef struct pxa_dma_desc { + volatile u32 ddadr; /* Points to the next descriptor + flags */ + volatile u32 dsadr; /* DSADR value for the current transfer */ + volatile u32 dtadr; /* DTADR value for the current transfer */ + volatile u32 dcmd; /* DCMD value for the current transfer */ +} pxa_dma_desc; + +typedef enum { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +} pxa_dma_prio; + +#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) +#define HAVE_ARCH_PCI_SET_DMA_MASK 1 +#endif + +/* + * DMA registration + */ + +int __init pxa_init_dma(int num_ch); + +int pxa_request_dma (char *name, + pxa_dma_prio prio, + void (*irq_handler)(int, void *), + void *data); + +void pxa_free_dma (int dma_ch); + +#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S new file mode 100644 index 00000000000..de16c12d523 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-pxa/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for PXA-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> +#include <mach/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mrc p15, 0, \tmp, c0, c0, 0 @ CPUID + mov \tmp, \tmp, lsr #13 + and \tmp, \tmp, #0x7 @ Core G + cmp \tmp, #1 + bhi 1004f + + mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 + add \base, \base, #0x00d00000 + ldr \irqstat, [\base, #0] @ ICIP + ldr \irqnr, [\base, #4] @ ICMR + b 1002f + +1004: + mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2 + mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2 + ands \irqnr, \irqstat, \irqnr + beq 1003f + rsb \irqstat, \irqnr, #0 + and \irqstat, \irqstat, \irqnr + clz \irqnr, \irqstat + rsb \irqnr, \irqnr, #31 + add \irqnr, \irqnr, #32 + b 1001f +1003: + mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP + mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR +1002: + ands \irqnr, \irqstat, \irqnr + beq 1001f + rsb \irqstat, \irqnr, #0 + and \irqstat, \irqstat, \irqnr + clz \irqnr, \irqstat + rsb \irqnr, \irqnr, #31 +1001: + .endm diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h new file mode 100644 index 00000000000..4c90b131027 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -0,0 +1,50 @@ +/* + * eseries-gpio.h + * + * Copyright (C) Ian Molton <spyro@f2s.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* e-series power button */ +#define GPIO_ESERIES_POWERBTN 0 + +/* UDC GPIO definitions */ +#define GPIO_E7XX_USB_DISC 13 +#define GPIO_E7XX_USB_PULLUP 3 + +#define GPIO_E800_USB_DISC 4 +#define GPIO_E800_USB_PULLUP 84 + +/* e740 PCMCIA GPIO definitions */ +/* Note: PWR1 seems to be inverted */ +#define GPIO_E740_PCMCIA_CD0 8 +#define GPIO_E740_PCMCIA_CD1 44 +#define GPIO_E740_PCMCIA_RDY0 11 +#define GPIO_E740_PCMCIA_RDY1 6 +#define GPIO_E740_PCMCIA_RST0 27 +#define GPIO_E740_PCMCIA_RST1 24 +#define GPIO_E740_PCMCIA_PWR0 20 +#define GPIO_E740_PCMCIA_PWR1 23 + +/* e750 PCMCIA GPIO definitions */ +#define GPIO_E750_PCMCIA_CD0 8 +#define GPIO_E750_PCMCIA_RDY0 12 +#define GPIO_E750_PCMCIA_RST0 27 +#define GPIO_E750_PCMCIA_PWR0 20 + +/* e800 PCMCIA GPIO definitions */ +#define GPIO_E800_PCMCIA_RST0 69 +#define GPIO_E800_PCMCIA_RST1 72 +#define GPIO_E800_PCMCIA_PWR0 20 +#define GPIO_E800_PCMCIA_PWR1 73 + +/* e7xx IrDA power control */ +#define GPIO_E7XX_IR_ON 38 + +/* ASIC related GPIOs */ +#define GPIO_ESERIES_TMIO_IRQ 5 +#define GPIO_E800_ANGELX_IRQ 8 diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h new file mode 100644 index 00000000000..f2a93d5e31d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h @@ -0,0 +1,27 @@ +/* + * eseries-irq.h + * + * Copyright (C) Ian Molton <spyro@f2s.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8) +#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n)) + +#define ANGELX_RDY0_IRQ IRQ_ANGELX(0) +#define ANGELX_ST0_IRQ IRQ_ANGELX(1) +#define ANGELX_CD0_IRQ IRQ_ANGELX(2) +#define ANGELX_RDY1_IRQ IRQ_ANGELX(3) +#define ANGELX_ST1_IRQ IRQ_ANGELX(4) +#define ANGELX_CD1_IRQ IRQ_ANGELX(5) + +#define TMIO_IRQ_BASE (IRQ_BOARD_START+0) +#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n)) + +#define TMIO_SD_IRQ IRQ_TMIO(1) +#define TMIO_USB_IRQ IRQ_TMIO(2) + diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h new file mode 100644 index 00000000000..2c538d8c362 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -0,0 +1,65 @@ +/* + * arch/arm/mach-pxa/include/mach/gpio.h + * + * PXA GPIO wrappers for arch-neutral GPIO calls + * + * Written by Philipp Zabel <philipp.zabel@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_PXA_GPIO_H +#define __ASM_ARCH_PXA_GPIO_H + +#include <mach/pxa-regs.h> +#include <asm/irq.h> +#include <mach/hardware.h> + +#include <asm-generic/gpio.h> + + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space. + */ +#define NR_BUILTIN_GPIO 128 + +static inline int gpio_get_value(unsigned gpio) +{ + if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) + return GPLR(gpio) & GPIO_bit(gpio); + else + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { + if (value) + GPSR(gpio) = GPIO_bit(gpio); + else + GPCR(gpio) = GPIO_bit(gpio); + } else { + __gpio_set_value(gpio, value); + } +} + +#define gpio_cansleep __gpio_cansleep + +#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + + +#endif diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h new file mode 100644 index 00000000000..42ee1956750 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-pxa/include/mach/gumstix.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/* BTRESET - Reset line to Bluetooth module, active low signal. */ +#define GPIO_GUMSTIX_BTRESET 7 +#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) + + +/* +GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean +interrupt signal for determining cable presence. On the original gumstix, +this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +this moves to GPIO17 and GPIO37. */ + +/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn +has detected a cable insertion; driven low otherwise. */ + +#ifdef CONFIG_ARCH_GUMSTIX_ORIG + +#define GPIO_GUMSTIX_USB_GPIOn 81 +#define GPIO_GUMSTIX_USB_GPIOx 83 + +#else + +#define GPIO_GUMSTIX_USB_GPIOn 35 +#define GPIO_GUMSTIX_USB_GPIOx 41 + +#endif + +/* usb state change */ +#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) + +#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) +#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) +#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) + +/* + * SD/MMC definitions + */ +#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ +#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ +#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) + +/* + * SMC Ethernet definitions + * ETH_RST provides a hardware reset line to the ethernet chip + * ETH is the IRQ line in from the ethernet chip to the PXA + */ +#define GPIO_GUMSTIX_ETH0_RST 80 +#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) +#define GPIO_GUMSTIX_ETH1_RST 52 +#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) + +#define GPIO_GUMSTIX_ETH0 36 +#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) +#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GPIO_GUMSTIX_ETH1 27 +#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) +#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) + + +/* CF reset line */ +#define GPIO8_RESET 8 + +/* CF slot 0 */ +#define GPIO4_nBVD1 4 +#define GPIO4_nSTSCHG GPIO4_nBVD1 +#define GPIO11_nCD 11 +#define GPIO26_PRDY_nBSY 26 +#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) + +/* CF slot 1 */ +#define GPIO18_nBVD1 18 +#define GPIO18_nSTSCHG GPIO18_nBVD1 +#define GPIO36_nCD 36 +#define GPIO27_PRDY_nBSY 27 +#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) + +/* CF GPIO line modes */ +#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) +#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) +#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) +#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) +#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) +#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) +#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h new file mode 100644 index 00000000000..e89df4d0d23 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -0,0 +1,235 @@ +/* + * arch/arm/mach-pxa/include/mach/hardware.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* + * We requires absolute addresses. + */ +#define PCIO_BASE 0 + +/* + * Workarounds for at least 2 errata so far require this. + * The mapping is set in mach-pxa/generic.c. + */ +#define UNCACHED_PHYS_0 0xff000000 +#define UNCACHED_ADDR UNCACHED_PHYS_0 + +/* + * Intel PXA2xx internal register mapping: + * + * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff + * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff + * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff + * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff + * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff + * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff + * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff + * + * Note that not all PXA2xx chips implement all those addresses, and the + * kernel only maps the minimum needed range of this mapping. + */ +#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) +#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) + +#ifndef __ASSEMBLY__ + +# define __REG(x) (*((volatile u32 *)io_p2v(x))) + +/* With indexed regs we don't want to feed the index through io_p2v() + especially if it is a variable, otherwise horrible code will result. */ +# define __REG2(x,y) \ + (*(volatile u32 *)((u32)&__REG(x) + (y))) + +# define __PREG(x) (io_v2p((u32)&(x))) + +#else + +# define __REG(x) io_p2v(x) +# define __PREG(x) io_v2p(x) + +#endif + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_PXA25x +#define __cpu_is_pxa21x(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xf3f; \ + _id == 0x212; \ + }) + +#define __cpu_is_pxa255(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x2d0; \ + }) + +#define __cpu_is_pxa25x(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x2d0 || _id == 0x290; \ + }) +#else +#define __cpu_is_pxa21x(id) (0) +#define __cpu_is_pxa255(id) (0) +#define __cpu_is_pxa25x(id) (0) +#endif + +#ifdef CONFIG_PXA27x +#define __cpu_is_pxa27x(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x411; \ + }) +#else +#define __cpu_is_pxa27x(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA300 +#define __cpu_is_pxa300(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x688; \ + }) +#else +#define __cpu_is_pxa300(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA310 +#define __cpu_is_pxa310(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x689; \ + }) +#else +#define __cpu_is_pxa310(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA320 +#define __cpu_is_pxa320(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x603 || _id == 0x682; \ + }) +#else +#define __cpu_is_pxa320(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA930 +#define __cpu_is_pxa930(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x683; \ + }) +#else +#define __cpu_is_pxa930(id) (0) +#endif + +#define cpu_is_pxa21x() \ + ({ \ + __cpu_is_pxa21x(read_cpuid_id()); \ + }) + +#define cpu_is_pxa255() \ + ({ \ + __cpu_is_pxa255(read_cpuid_id()); \ + }) + +#define cpu_is_pxa25x() \ + ({ \ + __cpu_is_pxa25x(read_cpuid_id()); \ + }) + +#define cpu_is_pxa27x() \ + ({ \ + __cpu_is_pxa27x(read_cpuid_id()); \ + }) + +#define cpu_is_pxa300() \ + ({ \ + __cpu_is_pxa300(read_cpuid_id()); \ + }) + +#define cpu_is_pxa310() \ + ({ \ + __cpu_is_pxa310(read_cpuid_id()); \ + }) + +#define cpu_is_pxa320() \ + ({ \ + __cpu_is_pxa320(read_cpuid_id()); \ + }) + +#define cpu_is_pxa930() \ + ({ \ + unsigned int id = read_cpuid(CPUID_ID); \ + __cpu_is_pxa930(id); \ + }) + +/* + * CPUID Core Generation Bit + * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x + * == 0x3 for pxa300/pxa310/pxa320 + */ +#define __cpu_is_pxa2xx(id) \ + ({ \ + unsigned int _id = (id) >> 13 & 0x7; \ + _id <= 0x2; \ + }) + +#define __cpu_is_pxa3xx(id) \ + ({ \ + unsigned int _id = (id) >> 13 & 0x7; \ + _id == 0x3; \ + }) + +#define cpu_is_pxa2xx() \ + ({ \ + __cpu_is_pxa2xx(read_cpuid_id()); \ + }) + +#define cpu_is_pxa3xx() \ + ({ \ + __cpu_is_pxa3xx(read_cpuid_id()); \ + }) + +/* + * Handy routine to set GPIO alternate functions + */ +extern int pxa_gpio_mode( int gpio_mode ); + +/* + * Return GPIO level, nonzero means high, zero is low + */ +extern int pxa_gpio_get_value(unsigned gpio); + +/* + * Set output GPIO level + */ +extern void pxa_gpio_set_value(unsigned gpio, int value); + +/* + * return current memory and LCD clock frequency in units of 10kHz + */ +extern unsigned int get_memclk_frequency_10khz(void); + +#endif + +#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) +#define PCIBIOS_MIN_IO 0 +#define PCIBIOS_MIN_MEM 0 +#define pcibios_assign_all_busses() 1 +#endif + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h new file mode 100644 index 00000000000..80596b01344 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/i2c.h @@ -0,0 +1,77 @@ +/* + * i2c_pxa.h + * + * Copyright (C) 2002 Intrinsyc Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _I2C_PXA_H_ +#define _I2C_PXA_H_ + +#if 0 +#define DEF_TIMEOUT 3 +#else +/* need a longer timeout if we're dealing with the fact we may well be + * looking at a multi-master environment +*/ +#define DEF_TIMEOUT 32 +#endif + +#define BUS_ERROR (-EREMOTEIO) +#define XFER_NAKED (-ECONNREFUSED) +#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ + +/* ICR initialize bit values +* +* 15. FM 0 (100 Khz operation) +* 14. UR 0 (No unit reset) +* 13. SADIE 0 (Disables the unit from interrupting on slave addresses +* matching its slave address) +* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration +* in master mode) +* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) +* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) +* 9. IRFIE 1 (Enable interrupts from full buffer received) +* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) +* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) +* 6. IUE 0 (Disable unit until we change settings) +* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) +* 4. MA 0 (Only send stop with the ICR stop bit) +* 3. TB 0 (We are not transmitting a byte initially) +* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) +* 1. STOP 0 (Do not send a STOP) +* 0. START 0 (Do not send a START) +* +*/ +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) + +/* I2C status register init values + * + * 10. BED 1 (Clear bus error detected) + * 9. SAD 1 (Clear slave address detected) + * 7. IRF 1 (Clear IDBR Receive Full) + * 6. ITE 1 (Clear IDBR Transmit Empty) + * 5. ALD 1 (Clear Arbitration Loss Detected) + * 4. SSD 1 (Clear Slave Stop Detected) + */ +#define I2C_ISR_INIT 0x7FF /* status register init */ + +struct i2c_slave_client; + +struct i2c_pxa_platform_data { + unsigned int slave_addr; + struct i2c_slave_client *slave; + unsigned int class; + int use_pio; +}; + +extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); + +#ifdef CONFIG_PXA27x +extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info); +#endif + +#endif diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h new file mode 100644 index 00000000000..5eff96fcc94 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/idp.h @@ -0,0 +1,199 @@ +/* + * arch/arm/mach-pxa/include/mach/idp.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc. + * + * 2001-09-13: Cliff Brake <cbrake@accelent.com> + * Initial code + * + * 2005-02-15: Cliff Brake <cliff.brake@gmail.com> + * <http://www.vibren.com> <http://bec-systems.com> + * Changes for 2.6 kernel. + */ + + +/* + * Note: this file must be safe to include in assembly files + * + * Support for the Vibren PXA255 IDP requires rev04 or later + * IDP hardware. + */ + + +#define IDP_FLASH_PHYS (PXA_CS0_PHYS) +#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) +#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS) +#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000) +#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000) +#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000) +#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000) + + +/* + * virtual memory map + */ + +#define IDP_COREVOLT_VIRT (0xf0000000) +#define IDP_COREVOLT_SIZE (1*1024*1024) + +#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE) +#define IDP_CPLD_SIZE (1*1024*1024) + +#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000 +#error Your custom IO space is getting a bit large !! +#endif + +#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT) +#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS) + +#ifndef __ASSEMBLY__ +# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x))) +#else +# define __CPLD_REG(x) CPLD_P2V(x) +#endif + +/* board level registers in the CPLD: (offsets from CPLD_VIRT) */ + +#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00) +#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04) +#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08) +#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C) +#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10) +#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14) +#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18) +#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C) +#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20) +#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24) +#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28) +#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C) +#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30) +#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34) + +#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50) +#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54) +#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58) +#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C) + +/* FPGA register virtual addresses */ + +#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV) +#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR) +#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL) +#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH) +#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW) +#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN) +#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR) +#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE) +#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR) +#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE) +#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR) +#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL) +#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD) +#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE) + +#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW) +#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS) +#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS) +#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS) + + +/* + * Bit masks for various registers + */ + +// IDP_CPLD_PCCARD_PWR +#define PCC0_PWR0 (1 << 0) +#define PCC0_PWR1 (1 << 1) +#define PCC0_PWR2 (1 << 2) +#define PCC0_PWR3 (1 << 3) +#define PCC1_PWR0 (1 << 4) +#define PCC1_PWR1 (1 << 5) +#define PCC1_PWR2 (1 << 6) +#define PCC1_PWR3 (1 << 7) + +// IDP_CPLD_PCCARD_EN +#define PCC0_RESET (1 << 6) +#define PCC1_RESET (1 << 7) +#define PCC0_ENABLE (1 << 0) +#define PCC1_ENABLE (1 << 1) + +// IDP_CPLD_PCCARDx_STATUS +#define _PCC_WRPROT (1 << 7) // 7-4 read as low true +#define _PCC_RESET (1 << 6) +#define _PCC_IRQ (1 << 5) +#define _PCC_INPACK (1 << 4) +#define PCC_BVD2 (1 << 3) +#define PCC_BVD1 (1 << 2) +#define PCC_VS2 (1 << 1) +#define PCC_VS1 (1 << 0) + +#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) + +/* A listing of interrupts used by external hardware devices */ + +#define TOUCH_PANEL_IRQ IRQ_GPIO(5) +#define IDE_IRQ IRQ_GPIO(21) + +#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING + +#define ETHERNET_IRQ IRQ_GPIO(4) +#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING + +#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING + +#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) +#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH + +#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) +#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH + +#define PCMCIA_S0_RDYINT IRQ_GPIO(19) +#define PCMCIA_S1_RDYINT IRQ_GPIO(22) + + +/* + * Macros for LED Driver + */ + +/* leds 0 = ON */ +#define IDP_HB_LED (1<<5) +#define IDP_BUSY_LED (1<<6) + +#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED) + +/* + * macros for MTD driver + */ + +#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1)) +#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1)) + +/* + * macros for matrix keyboard driver + */ + +#define KEYBD_MATRIX_NUMBER_INPUTS 7 +#define KEYBD_MATRIX_NUMBER_OUTPUTS 14 + +#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE +#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE + +#define KEYBD_MATRIX_SETTLING_TIME_US 100 +#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2 + +#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \ +{\ + IDP_CPLD_KB_COL_LOW = outputs;\ + IDP_CPLD_KB_COL_HIGH = outputs >> 7;\ +} + +#define KEYBD_MATRIX_GET_INPUTS(inputs) \ +{\ + inputs = (IDP_CPLD_KB_ROW & 0x7f);\ +} + + diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h new file mode 100644 index 00000000000..600fd4f7660 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/io.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-pxa/include/mach/io.h + * + * Copied from asm/arch/sa1100/io.h + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include <mach/hardware.h> + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h new file mode 100644 index 00000000000..0a50c3c763d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/irda.h @@ -0,0 +1,23 @@ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_OFF 1 +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 + +struct pxaficp_platform_data { + int transceiver_cap; + void (*transceiver_mode)(struct device *dev, int mode); + int (*startup)(struct device *dev); + void (*shutdown)(struct device *dev); +}; + +extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); + +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +void pxa2xx_transceiver_mode(struct device *dev, int mode); +#endif + +#endif diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h new file mode 100644 index 00000000000..32772bc6925 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -0,0 +1,264 @@ +/* + * arch/arm/mach-pxa/include/mach/irqs.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#define PXA_IRQ(x) (x) + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ +#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ +#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */ +#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */ +#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */ +#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */ +#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */ +#endif + +#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */ +#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */ +#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */ +#define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */ +#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */ +#define IRQ_USB PXA_IRQ(11) /* USB Service */ +#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */ +#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */ +#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */ +#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */ +#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */ +#define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */ +#define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */ +#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */ +#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */ +#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */ +#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */ +#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */ +#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/ +#define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */ +#define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */ +#define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */ +#define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */ +#define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */ +#define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */ +#define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */ +#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */ +#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */ + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */ +#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */ +#endif + +#ifdef CONFIG_PXA3xx +#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */ +#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */ +#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */ +#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */ +#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */ +#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */ +#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */ +#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */ +#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */ +#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */ +#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */ +#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */ +#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ +#endif + +#define PXA_GPIO_IRQ_BASE (64) +#define PXA_GPIO_IRQ_NUM (128) + +#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) +#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) + +#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) +#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) + +/* + * The next 16 interrupts are for board specific purposes. Since + * the kernel can only run on one machine at a time, we can re-use + * these. If you need more, increase IRQ_BOARD_END, but keep it + * within sensible limits. + */ +#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) +#define IRQ_BOARD_END (IRQ_BOARD_START + 16) + +#define IRQ_SA1111_START (IRQ_BOARD_END) +#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) +#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) +#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) +#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) +#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) +#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) +#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) +#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) +#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) +#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) +#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) +#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) +#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) +#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) +#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) +#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) +#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) +#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) +#define IRQ_MSTXINT (IRQ_BOARD_END + 18) +#define IRQ_MSRXINT (IRQ_BOARD_END + 19) +#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) +#define IRQ_TPTXINT (IRQ_BOARD_END + 21) +#define IRQ_TPRXINT (IRQ_BOARD_END + 22) +#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) +#define SSPXMTINT (IRQ_BOARD_END + 24) +#define SSPRCVINT (IRQ_BOARD_END + 25) +#define SSPROR (IRQ_BOARD_END + 26) +#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) +#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) +#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) +#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) +#define AUDTFSR (IRQ_BOARD_END + 36) +#define AUDRFSR (IRQ_BOARD_END + 37) +#define AUDTUR (IRQ_BOARD_END + 38) +#define AUDROR (IRQ_BOARD_END + 39) +#define AUDDTS (IRQ_BOARD_END + 40) +#define AUDRDD (IRQ_BOARD_END + 41) +#define AUDSTO (IRQ_BOARD_END + 42) +#define IRQ_USBPWR (IRQ_BOARD_END + 43) +#define IRQ_HCIM (IRQ_BOARD_END + 44) +#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) +#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) +#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) +#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) +#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) +#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) +#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) +#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) +#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) +#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) + +#define IRQ_LOCOMO_START (IRQ_BOARD_END) +#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) +#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) +#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) +#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) +#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) +#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) +#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) +#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) +#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) +#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) +#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) +#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) +#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) +#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) +#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) +#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) +#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) +#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) +#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) +#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) +#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20) +#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) + +/* + * Figure out the MAX IRQ number. + * + * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. + * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 + * Otherwise, we have the standard IRQs only. + */ +#ifdef CONFIG_SA1111 +#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) +#elif defined(CONFIG_SHARP_LOCOMO) +#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) +#elif defined(CONFIG_ARCH_LUBBOCK) || \ + defined(CONFIG_MACH_LOGICPD_PXA270) || \ + defined(CONFIG_MACH_TOSA) || \ + defined(CONFIG_MACH_MAINSTONE) || \ + defined(CONFIG_MACH_PCM027) || \ + defined(CONFIG_MACH_MAGICIAN) +#define NR_IRQS (IRQ_BOARD_END) +#elif defined(CONFIG_MACH_ZYLONITE) +#define NR_IRQS (IRQ_BOARD_START + 32) +#else +#define NR_IRQS (IRQ_BOARD_START) +#endif + +/* + * Board specific IRQs. Define them here. + * Do not surround them with ifdefs. + */ +#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) +#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) +#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) +#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ +#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3) +#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4) +#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5) +#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ +#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) + +#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) +#define LPD270_USBC_IRQ LPD270_IRQ(2) +#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) +#define LPD270_AC97_IRQ LPD270_IRQ(4) + +#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) +#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) +#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) +#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) +#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3) +#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4) +#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5) +#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6) +#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7) +#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9) +#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10) +#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11) +#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13) +#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) +#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) + +/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ +#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) +#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) +#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) +#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) + +/* phyCORE-PXA270 (PCM027) Interrupts */ +#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) +#define PCM027_BTDET_IRQ PCM027_IRQ(0) +#define PCM027_FF_RI_IRQ PCM027_IRQ(1) +#define PCM027_MMCDET_IRQ PCM027_IRQ(2) +#define PCM027_PM_5V_IRQ PCM027_IRQ(3) + +/* ITE8152 irqs */ +/* add IT8152 IRQs beyond BOARD_END */ +#ifdef CONFIG_PCI_HOST_ITE8152 +#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) + +/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ +#define IT8152_LD_IRQ_COUNT 9 +#define IT8152_LP_IRQ_COUNT 16 +#define IT8152_PD_IRQ_COUNT 15 + +/* Priorities: */ +#define IT8152_PD_IRQ(i) IT8152_IRQ(i) +#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) +#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) + +#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) + +#if NR_IRQS < (IT8152_LAST_IRQ+1) +#undef NR_IRQS +#define NR_IRQS (IT8152_LAST_IRQ+1) +#endif + +#endif /* CONFIG_PCI_HOST_ITE8152 */ diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h new file mode 100644 index 00000000000..79d209b826f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_ZYLONITE_H +#define __ASM_ARCH_ZYLONITE_H + +#define LITTLETON_ETH_PHYS 0x30000000 + +#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h new file mode 100644 index 00000000000..f89fb715266 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/lpd270.h @@ -0,0 +1,38 @@ +/* + * arch/arm/mach-pxa/include/mach/lpd270.h + * + * Author: Lennert Buytenhek + * Created: Feb 10, 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_LPD270_H +#define __ASM_ARCH_LPD270_H + +#define LPD270_CPLD_PHYS PXA_CS2_PHYS +#define LPD270_CPLD_VIRT 0xf0000000 +#define LPD270_CPLD_SIZE 0x00100000 + +#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) + +/* CPLD registers */ +#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) +#define LPD270_CONTROL LPD270_CPLD_REG(0x00) +#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) +#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) +#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14) +#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20) +#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24) +#define LPD270_EGPIO LPD270_CPLD_REG(0x30) +#define LPD270_INT_MASK LPD270_CPLD_REG(0x40) +#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50) + +#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ +#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ +#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */ + + +#endif diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h new file mode 100644 index 00000000000..4cb24154a5a --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-pxa/include/mach/lubbock.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS + +#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS +#define LUBBOCK_FPGA_VIRT (0xf0000000) +#define LUB_P2V(x) ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT) +#define LUB_V2P(x) ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS) + +#ifndef __ASSEMBLY__ +# define __LUB_REG(x) (*((volatile unsigned long *)LUB_P2V(x))) +#else +# define __LUB_REG(x) LUB_P2V(x) +#endif + +/* FPGA register virtual addresses */ +#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000) +#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) +#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040) +#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050) +#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060) +#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) +#define LUB_MISC_RD __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090) +#define LUB_IRQ_MASK_EN __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0) +#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0) +#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100) + +#ifndef __ASSEMBLY__ +extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); +#endif diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h new file mode 100644 index 00000000000..38d68d99f58 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -0,0 +1,117 @@ +/* + * GPIO and IRQ definitions for HTC Magician PDA phones + * + * Copyright (c) 2007 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _MAGICIAN_H_ +#define _MAGICIAN_H_ + +#include <mach/irqs.h> + +/* + * PXA GPIOs + */ + +#define GPIO0_MAGICIAN_KEY_POWER 0 +#define GPIO9_MAGICIAN_UNKNOWN 9 +#define GPIO10_MAGICIAN_GSM_IRQ 10 +#define GPIO11_MAGICIAN_GSM_OUT1 11 +#define GPIO13_MAGICIAN_CPLD_IRQ 13 +#define GPIO18_MAGICIAN_UNKNOWN 18 +#define GPIO22_MAGICIAN_VIBRA_EN 22 +#define GPIO26_MAGICIAN_GSM_POWER 26 +#define GPIO27_MAGICIAN_USBC_PUEN 27 +#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO37_MAGICIAN_KEY_HANGUP 37 +#define GPIO38_MAGICIAN_KEY_CONTACTS 38 +#define GPIO40_MAGICIAN_GSM_OUT2 40 +#define GPIO48_MAGICIAN_UNKNOWN 48 +#define GPIO56_MAGICIAN_UNKNOWN 56 +#define GPIO57_MAGICIAN_CAM_RESET 57 +#define GPIO75_MAGICIAN_SAMSUNG_POWER 75 +#define GPIO83_MAGICIAN_nIR_EN 83 +#define GPIO86_MAGICIAN_GSM_RESET 86 +#define GPIO87_MAGICIAN_GSM_SELECT 87 +#define GPIO90_MAGICIAN_KEY_CALENDAR 90 +#define GPIO91_MAGICIAN_KEY_CAMERA 91 +#define GPIO93_MAGICIAN_KEY_UP 93 +#define GPIO94_MAGICIAN_KEY_DOWN 94 +#define GPIO95_MAGICIAN_KEY_LEFT 95 +#define GPIO96_MAGICIAN_KEY_RIGHT 96 +#define GPIO97_MAGICIAN_KEY_ENTER 97 +#define GPIO98_MAGICIAN_KEY_RECORD 98 +#define GPIO99_MAGICIAN_HEADPHONE_IN 99 +#define GPIO100_MAGICIAN_KEY_VOL_UP 100 +#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 +#define GPIO102_MAGICIAN_KEY_PHONE 102 +#define GPIO103_MAGICIAN_LED_KP 103 +#define GPIO104_MAGICIAN_LCD_POWER_1 104 +#define GPIO105_MAGICIAN_LCD_POWER_2 105 +#define GPIO106_MAGICIAN_LCD_POWER_3 106 +#define GPIO107_MAGICIAN_DS1WM_IRQ 107 +#define GPIO108_MAGICIAN_GSM_READY 108 +#define GPIO114_MAGICIAN_UNKNOWN 114 +#define GPIO115_MAGICIAN_nPEN_IRQ 115 +#define GPIO116_MAGICIAN_nCAM_EN 116 +#define GPIO119_MAGICIAN_UNKNOWN 119 +#define GPIO120_MAGICIAN_UNKNOWN 120 + +/* + * CPLD IRQs + */ + +#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) +#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) +#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) +#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) + +/* + * CPLD EGPIOs + */ + +#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ +#define MAGICIAN_EGPIO(reg,bit) \ + (MAGICIAN_EGPIO_BASE + 8*reg + bit) + +/* output */ + +#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) +#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) +#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) +#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) +#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) +#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) +#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) +#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) +#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) +#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) +#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) +#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) + +/* input */ + +#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) +#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) + +#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) +#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) +#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) +#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) +#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) + +#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) + +#endif /* _MAGICIAN_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h new file mode 100644 index 00000000000..3461c4302ff --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -0,0 +1,120 @@ +/* + * arch/arm/mach-pxa/include/mach/mainstone.h + * + * Author: Nicolas Pitre + * Created: Nov 14, 2002 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARCH_MAINSTONE_H +#define ASM_ARCH_MAINSTONE_H + +#define MST_ETH_PHYS PXA_CS4_PHYS + +#define MST_FPGA_PHYS PXA_CS2_PHYS +#define MST_FPGA_VIRT (0xf0000000) +#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT) +#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS) + +#ifndef __ASSEMBLY__ +# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x))) +#else +# define __MST_REG(x) MST_P2V(x) +#endif + +/* board level registers in the FPGA */ + +#define MST_LEDDAT1 __MST_REG(0x08000010) +#define MST_LEDDAT2 __MST_REG(0x08000014) +#define MST_LEDCTRL __MST_REG(0x08000040) +#define MST_GPSWR __MST_REG(0x08000060) +#define MST_MSCWR1 __MST_REG(0x08000080) +#define MST_MSCWR2 __MST_REG(0x08000084) +#define MST_MSCWR3 __MST_REG(0x08000088) +#define MST_MSCRD __MST_REG(0x08000090) +#define MST_INTMSKENA __MST_REG(0x080000c0) +#define MST_INTSETCLR __MST_REG(0x080000d0) +#define MST_PCMCIA0 __MST_REG(0x080000e0) +#define MST_PCMCIA1 __MST_REG(0x080000e4) + +#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */ +#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */ +#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */ +#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */ +#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */ +#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */ +#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */ +#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */ +#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */ + +#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */ +#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */ +#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */ +#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */ +#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */ + +#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */ +#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */ +#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */ +#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */ +#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */ + +#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */ +#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */ +#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */ +#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */ +#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */ +#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */ +#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */ + +#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */ +#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */ +#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */ + +#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */ +#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */ +#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */ +#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */ +#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */ +#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */ +#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */ +#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */ +#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */ +#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */ + +#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */ +#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */ +#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */ +#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */ +#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */ +#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */ +#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */ +#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */ +#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */ +#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ +#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ +#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */ +#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */ +#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */ + +#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */ +#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */ +#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */ +#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */ +#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */ +#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */ +#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */ +#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */ + +#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */ +#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/ +#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */ +#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */ +#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */ +#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ + +#endif diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h new file mode 100644 index 00000000000..552eb7fa657 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -0,0 +1,52 @@ +/* + * arch/arm/mach-pxa/include/mach/memory.h + * + * Author: Nicolas Pitre + * Copyright: (C) 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0xa0000000) + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +/* + * The nodes are matched with the physical SDRAM banks as follows: + * + * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff + * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff + * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff + * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff + * + * This needs a node mem size of 26 bits. + */ +#define NODE_MEM_SIZE_BITS 26 + +#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) +void cmx270_pci_adjust_zones(int node, unsigned long *size, + unsigned long *holes); + +#define arch_adjust_zones(node, size, holes) \ + cmx270_pci_adjust_zones(node, size, holes) + +#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) +#endif + +#endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h new file mode 100644 index 00000000000..6c8e72238bf --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -0,0 +1,161 @@ +#ifndef __ASM_ARCH_MFP_PXA25X_H +#define __ASM_ARCH_MFP_PXA25X_H + +#include <mach/mfp.h> +#include <mach/mfp-pxa2xx.h> + +/* GPIO */ +#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0) + +#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1) + +/* Crystal and Clock Signals */ +#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) +#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW) +#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW) +#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) +#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW) +#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW) +#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1) +#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1) + +/* PC CARD */ +#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH) +#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) + +/* FFUART */ +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) + +/* BTUART */ +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* HWUART */ +#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3) +#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH) +#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH) +#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH) +#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1) +#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1 */ +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) + +/* AC97 */ +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1) + +/* SSP 2 - NSSP */ +#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1) +#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW) +#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1) +#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW) +#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW) +#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2) + +/* MMC */ +#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW) +#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW) +#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW) +#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW) +#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW) +#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW) +#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) + +#endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h new file mode 100644 index 00000000000..122bdbd5318 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -0,0 +1,433 @@ +#ifndef __ASM_ARCH_MFP_PXA27X_H +#define __ASM_ARCH_MFP_PXA27X_H + +/* + * NOTE: for those special-function bidirectional GPIOs, as described + * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input + * alternative is preserved, the direction is actually selected by the + * specific controller, and this should work in most cases. + */ + +#include <mach/mfp.h> +#include <mach/mfp-pxa2xx.h> + +/* GPIO */ +#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0) + +/* Crystal and Clock Signals */ +#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW) +#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW) +#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1) + +/* OS Timer Signals */ +#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1) +#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1) +#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW) +#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW) +#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH) +#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH) +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH) +#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH) +#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH) +#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH) +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1) +#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1) +#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2) +#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2) +#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2) +#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2) +#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2) +#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3) +#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW) +#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW) +#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW) +#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW) + +/* PC CARD */ +#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH) +#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH) +#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH) +#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH) +#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) +#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH) +#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) +#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH) + +/* I2C */ +#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) +#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1) + +/* FFUART */ +#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3) +#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3) +#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3) +#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3) +#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1) +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1) +#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1) +#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1) +#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3) +#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3) +#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH) +#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH) +#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH) +#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH) +#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH) + +/* BTUART */ +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2) +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1/2/3 */ +#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW) +#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW) +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) +#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW) +#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW) +#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW) +#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW) +#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW) +#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW) + +/* AC97 */ +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW) +#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW) +#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW) +#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW) +#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW) +#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW) +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2) +#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3) +#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) +#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2) +#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2) + +/* SSP 2 */ +#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1) +#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3) +#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW) +#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2) +#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3) +#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW) +#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2) +#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2) +#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW) +#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3) +#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW) +#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW) +#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW) +#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW) +#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2) +#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW) +#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1) +#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1) +#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2) +#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1) +#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1) +#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2) +#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2) + +/* SSP 3 */ +#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3) +#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW) +#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2) +#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1) +#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW) +#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3) +#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3) +#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1) +#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW) +#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW) +#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3) +#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1) +#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1) + +/* MMC */ +#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW) +#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1) +#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1) +#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1) +#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1) +#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW) +#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) +#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1) +#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW) + +/* Keypad */ +#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1) +#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1) +#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1) +#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1) +#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1) +#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1) +#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1) +#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2) +#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1) +#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1) +#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1) +#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2) +#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3) +#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3) +#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3) +#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2) +#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1) +#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1) +#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1) +#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3) +#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1) +#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1) +#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3) +#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3) +#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3) +#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH) +#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH) +#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH) +#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH) +#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH) +#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH) +#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH) +#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH) +#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH) +#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH) +#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH) + +/* USB P3 */ +#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3) +#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3) +#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) +#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) +#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW) +#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3) +#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3) +#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2) +#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2) +#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3) + +/* USB P2 */ +#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW) +#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2) +#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW) +#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW) +#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3) +#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3) +#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2) +#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2) + +/* USB Host Port 1/2 */ +#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1) +#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW) +#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1) +#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW) + +/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */ +#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2) +#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1) +#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2) +#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2) +#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW) +#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1) +#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1) +#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2) +#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3) +#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW) +#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3) +#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3) +#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1) +#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1) +#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1) +#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1) +#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW) +#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3) +#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1) +#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2) +#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3) +#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3) +#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3) +#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3) +#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3) +#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3) +#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2) +#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2) +#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2) +#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2) +#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1) +#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1) +#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1) +#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1) +#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1) +#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1) +#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1) + +/* Universal Subscriber ID Interface */ +#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW) +#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW) +#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW) +#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW) +#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW) +#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW) +#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW) +#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3) +#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW) +#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW) + +/* Mobile Scalable Link (MSL) Interface */ +#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW) +#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW) +#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW) +#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW) +#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW) +#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2) +#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2) +#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2) +#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2) +#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2) +#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2) +#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW) + +/* Memory Stick Host Controller */ +#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW) +#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2) +#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) +#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +extern int keypad_set_wake(unsigned int on); +#endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h new file mode 100644 index 00000000000..3e9211591e2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -0,0 +1,133 @@ +#ifndef __ASM_ARCH_MFP_PXA2XX_H +#define __ASM_ARCH_MFP_PXA2XX_H + +#include <mach/mfp.h> + +/* + * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: + * + * MFP_PIN(x) + * MFP_AFx + * MFP_LPM_DRIVE_{LOW, HIGH} + * MFP_LPM_EDGE_x + * + * other MFP_x bit definitions will be ignored + * + * and adds the below two bits specifically for pxa2xx: + * + * bit 23 - Input/Output (PXA2xx specific) + * bit 24 - Wakeup Enable(PXA2xx specific) + */ + +#define MFP_DIR_IN (0x0 << 23) +#define MFP_DIR_OUT (0x1 << 23) +#define MFP_DIR_MASK (0x1 << 23) +#define MFP_DIR(x) (((x) >> 23) & 0x1) + +#define MFP_LPM_CAN_WAKEUP (0x1 << 24) +#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) +#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) +#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) + +/* specifically for enabling wakeup on keypad GPIOs */ +#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP) + +#define MFP_CFG_IN(pin, af) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN)) + +/* NOTE: pins configured as output _must_ provide a low power state, + * and this state should help to minimize the power dissipation. + */ +#define MFP_CFG_OUT(pin, af, state) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) + +/* Common configurations for pxa25x and pxa27x + * + * Note: pins configured as GPIO are always initialized to input + * so not to cause any side effect + */ +#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0) +#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0) +#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0) +#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0) +#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0) +#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0) +#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0) +#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0) +#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0) +#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) + +extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); +extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm); +extern int gpio_set_wake(unsigned int gpio, unsigned int on); +#endif /* __ASM_ARCH_MFP_PXA2XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h new file mode 100644 index 00000000000..bc1fb33a6e7 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -0,0 +1,575 @@ +/* + * arch/arm/mach-pxa/include/mach/mfp-pxa300.h + * + * PXA300/PXA310 specific MFP configuration definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * 2007-08-21: eric miao <eric.miao@marvell.com> + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_PXA300_H +#define __ASM_ARCH_MFP_PXA300_H + +#include <mach/mfp.h> +#include <mach/mfp-pxa3xx.h> + +/* GPIO */ +#define GPIO46_GPIO MFP_CFG(GPIO46, AF1) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF3) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF2) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF3) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF3) +#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) +#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) + +#ifdef CONFIG_CPU_PXA310 +#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) +#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) +#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) +#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) +#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) +#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) +#endif + +/* Chip Select */ +#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) + +/* AC97 */ +#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1) +#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1) +#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1) +#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1) +#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1) +#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3) +#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2) +#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3) +#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2) +#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) +#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1) + +/* I2C */ +#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH) +#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH) + +/* QCI */ +#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X) +#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X) +#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X) +#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X) +#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X) +#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X) +#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X) +#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) +#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) +#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) +#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) +#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) +#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) +#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) + +/* KEYPAD */ +#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) +#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT) +#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT) +#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT) +#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT) +#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT) +#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT) +#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT) +#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT) +#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT) +#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT) +#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT) +#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT) +#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT) +#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT) +#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT) +#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT) +#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT) +#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT) +#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT) +#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT) +#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT) +#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT) +#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT) +#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) +#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) +#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) +#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) +#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT) +#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) +#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT) +#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) +#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) +#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) +#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT) + +#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT) +#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT) +#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT) +#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT) +#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT) +#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT) +#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT) +#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT) +#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT) +#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT) +#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT) +#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT) +#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT) +#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT) +#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT) +#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT) +#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) +#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT) +#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT) + +#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) +#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH) +#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH) +#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) +#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH) +#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH) +#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH) +#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH) +#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH) +#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) +#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) +#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH) +#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH) +#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH) +#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH) +#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) +#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) +#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) +#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) +#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) +#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH) +#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) +#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH) +#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH) + +/* LCD */ +#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X) +#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X) +#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X) +#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X) +#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X) +#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X) +#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X) +#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X) +#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X) +#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X) +#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X) +#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X) +#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X) +#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X) +#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) +#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) +#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) +#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) +#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) +#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) +#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) +#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X) +#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) +#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) + +#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) +#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) +#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X) + +/* Mini-LCD */ +#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X) +#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X) +#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X) +#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X) +#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X) +#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X) +#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X) +#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X) +#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X) +#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X) +#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X) +#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X) +#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X) +#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X) +#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X) +#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X) +#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X) +#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X) +#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X) +#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X) + +/* MMC1 */ +#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) +#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) +#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH) +#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH) +#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH) +#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH) +#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) +#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) + +/* MMC2 */ +#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH) +#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH) +#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH) +#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH) +#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH) +#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH) +#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) +#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) +#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) +#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) +#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH) +#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH) + +/* SSP1 */ +#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1) +#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1) +#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6) +#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2) +#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5) +#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5) +#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1) +#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1) +#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7) +#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2) +#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2) +#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7) +#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5) +#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4) +#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5) +#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6) +#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1) +#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6) +#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6) +#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1) + +/* SSP2 */ +#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2) +#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2) +#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2) +#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2) +#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2) +#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6) +#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6) +#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2) +#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2) +#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2) +#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7) +#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5) +#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4) +#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) +#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) +#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5) +#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2) +#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7) +#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6) +#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4) +#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2) +#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2) +#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4) +#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7) + +/* SSP3 */ +#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW) +#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT) +#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW) +#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT) +#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) +#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT) +#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW) +#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT) +#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW) +#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT) +#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW) +#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) + +/* SSP4 */ +#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) +#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) +#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH) +#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH) +#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH) +#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH) + +/* UART1 */ +#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT) +#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT) +#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT) +#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT) +#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT) +#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT) + +#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT) +#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT) +#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT) +#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT) +#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT) +#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) + +#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT) +#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT) +#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT) +#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT) +#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT) +#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT) + +#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT) +#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT) +#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT) +#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT) +#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT) +#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT) + +#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT) +#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT) +#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT) + +#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT) +#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT) +#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT) + +#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) +#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT) +#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT) +#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT) +#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT) +#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT) +#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT) +#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT) + +#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT) +#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) +#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT) +#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT) +#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT) +#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT) +#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT) + +/* UART2 */ +#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT) +#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT) +#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT) +#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT) + +#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT) +#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT) +#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT) +#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT) + +#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT) +#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT) +#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT) +#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT) + +#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT) +#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT) +#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT) +#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT) + +/* UART3 */ +#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT) +#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT) +#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT) +#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT) + +#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT) +#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT) +#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT) +#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT) + +#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT) +#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) +#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT) +#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT) +#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT) +#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) + +#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT) +#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) +#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT) +#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT) +#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT) +#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) + +/* USB Host */ +#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1) +#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1) + +/* USB P3 */ +#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2) +#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2) +#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2) +#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2) +#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2) +#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2) + +/* PWM */ +#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1) +#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1) +#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1) +#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1) + +/* CIR */ +#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5) +#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3) + +#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5) +#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2) + +#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1) +#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7) +#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6) +#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6) +#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6) +#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6) +#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2) +#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3) +#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7) +#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6) + +#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1) + +#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1) +#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1) +#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1) +#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1) + +#define GPIO9_SCIO MFP_CFG(GPIO9, AF1) +#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4) +#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1) + +/* + * PXA300 specific MFP configurations + */ +#ifdef CONFIG_CPU_PXA300 +#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2) +#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3) +#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4) +#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4) +#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5) +#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2) +#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2) +#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2) +#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2) +#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2) +#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2) +#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2) + +/* U2D UTMI */ +#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1) +#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3) +#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1) +#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5) +#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3) +#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2) +#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5) +#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3) +#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2) +#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1) +#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5) +#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1) +#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3) +#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3) +#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3) +#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4) +#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3) +#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3) +#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3) +#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4) +#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2) +#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7) +#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4) +#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2) +#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3) +#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5) +#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1) +#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2) +#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3) +#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3) +#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2) +#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3) +#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5) +#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3) +#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5) +#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3) +#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4) +#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3) +#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7) +#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5) +#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3) +#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5) +#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3) +#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3) +#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3) +#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3) +#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3) +#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3) +#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3) +#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3) +#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3) +#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3) +#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3) +#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3) +#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3) +#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3) +#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3) +#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3) +#endif /* CONFIG_CPU_PXA300 */ + +/* + * PXA310 specific MFP configurations + */ +#ifdef CONFIG_CPU_PXA310 +/* USB P2 */ +#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1) +#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1) +#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1) +#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1) +#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1) +#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1) + +/* MMC1 */ +#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3) +#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3) + +/* MMC3 */ +#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2) +#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2) +#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1) +#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1) +#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1) +#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1) +#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1) +#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1) + +/* ULPI */ +#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1) +#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3) +#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3) +#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3) +#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3) +#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3) +#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3) +#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3) +#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) +#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) + +#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) +#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) +#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) +#endif /* CONFIG_CPU_PXA310 */ + +#endif /* __ASM_ARCH_MFP_PXA300_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h new file mode 100644 index 00000000000..74990510cf3 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h @@ -0,0 +1,447 @@ +/* + * arch/arm/mach-pxa/include/mach/mfp-pxa320.h + * + * PXA320 specific MFP configuration definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * 2007-08-21: eric miao <eric.miao@marvell.com> + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_PXA320_H +#define __ASM_ARCH_MFP_PXA320_H + +#include <mach/mfp.h> +#include <mach/mfp-pxa3xx.h> + +/* GPIO */ +#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) + +#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) +#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) +#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) +#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) +#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) +#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) +#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0) +#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0) +#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0) +#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0) +#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) + +/* Chip Select */ +#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) + +/* AC97 */ +#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1) +#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1) +#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1) +#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1) +#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1) +#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2) +#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2) +#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3) +#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3) +#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1) +#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1) + +/* I2C */ +#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH) +#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH) + +/* QCI */ +#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X) +#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X) +#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X) +#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X) +#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X) +#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X) +#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X) +#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X) +#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X) +#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X) +#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X) +#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X) +#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X) +#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X) + +#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5) + +#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3) +#define GPIO0_DRQ MFP_CFG(GPIO0, AF2) +#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5) +#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6) +#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1) +#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4) +#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1) +#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1) + +#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT) +#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT) +#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT) +#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT) + +#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT) +#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT) +#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT) +#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT) +#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT) +#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT) +#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT) +#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT) + +#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT) +#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT) +#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT) +#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT) +#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT) +#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT) +#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT) +#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT) + +#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT) +#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT) + +#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) +#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) +#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) +#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) +#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) +#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) +#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) +#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) + +#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT) +#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT) +#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT) +#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT) +#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT) +#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT) +#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT) +#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT) + +#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH) +#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH) +#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) +#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) +#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) +#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH) + +#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) +#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) +#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) +#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) +#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) +#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH) +#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH) +#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) + +/* LCD */ +#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X) +#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X) +#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X) +#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X) +#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X) +#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X) +#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X) +#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X) +#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X) +#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X) +#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X) +#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X) +#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X) +#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X) +#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X) +#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X) +#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X) +#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X) +#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X) +#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X) +#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X) +#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X) +#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X) +#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X) +#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X) +#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X) + +#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X) +#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X) +#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X) +#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X) +#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X) +#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X) +#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X) +#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X) +#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X) +#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X) +#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X) +#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X) +#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X) +#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X) +#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X) +#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X) +#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X) +#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X) +#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X) +#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X) +#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X) +#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X) +#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X) +#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X) + +/* MMC1 */ +#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH) +#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH) +#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH) +#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH) +#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH) +#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) +#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) +#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) +#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) +#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH) +#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH) +#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH) +#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH) + +#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH) +#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH) +#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH) +#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH) +#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) +#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) + +#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH) +#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH) +#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH) +#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) +#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH) +#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH) +#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH) +#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH) +#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH) +#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) +#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH) +#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) + +/* 1-Wire */ +#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT) +#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) + +/* SSP1 */ +#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1) +#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1) +#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1) +#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1) +#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6) +#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1) +#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1) +#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6) + +/* SSP2 */ +#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2) +#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2) +#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2) +#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2) +#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2) +#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5) +#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2) +#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) +#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) + +#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) +#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) +#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) +#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) +#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) +#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) +#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) +#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW) +#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT) +#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW) +#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT) +#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW) + +#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH) +#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH) +#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH) +#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH) +#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) +#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) +#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH) + +/* UART1 */ +#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT) +#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) +#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) +#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) +#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) +#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) +#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) +#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT) +#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT) +#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) +#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) +#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) +#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) +#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) +#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) +#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT) +#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT) +#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) +#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) +#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) +#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) +#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) +#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) +#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) +#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) +#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) +#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) +#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) + +/* UART2 */ +#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT) +#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT) +#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT) +#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT) +#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) +#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) +#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT) +#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT) + +/* UART3 */ +#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT) +#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT) +#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT) +#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT) +#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT) +#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT) +#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT) +#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) +#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) +#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT) +#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT) +#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) +#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT) +#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT) +#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT) +#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT) +#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT) +#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT) +#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT) +#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT) + + +/* USB 2.0 UTMI */ +#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1) +#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3) +#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1) +#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5) +#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3) +#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2) +#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5) +#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3) +#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1) +#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5) +#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1) +#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3) +#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3) +#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3) +#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4) +#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3) +#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3) +#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3) + +#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3) +#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3) +#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3) +#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3) +#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3) +#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3) +#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3) +#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3) + +#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3) +#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3) +#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3) +#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3) +#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3) +#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3) +#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3) +#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3) + +#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4) +#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2) +#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7) + +#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4) +#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2) +#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4) +#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5) + +#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1) +#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2) +#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3) + +#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3) +#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2) +#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3) + +#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5) +#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3) +#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7) +#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5) + +#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4) +#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5) +#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7) + +#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5) +#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3) +#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5) + +/* USB Host 1.1 */ +#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1) +#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1) + +/* USB P2 */ +#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2) +#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4) +#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4) +#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2) +#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2) +#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2) +#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2) +#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2) +#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2) +#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2) + +/* USB P3 */ +#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2) +#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2) +#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2) +#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2) +#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2) +#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2) + +#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6) +#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6) + +#define GPIO2_RDY MFP_CFG(GPIO2, AF1) +#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) + +#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) +#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) +#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1) +#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1) + +#endif /* __ASM_ARCH_MFP_PXA320_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h new file mode 100644 index 00000000000..1f6b35c015d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h @@ -0,0 +1,252 @@ +#ifndef __ASM_ARCH_MFP_PXA3XX_H +#define __ASM_ARCH_MFP_PXA3XX_H + +#define MFPR_BASE (0x40e10000) +#define MFPR_SIZE (PAGE_SIZE) + +/* MFPR register bit definitions */ +#define MFPR_PULL_SEL (0x1 << 15) +#define MFPR_PULLUP_EN (0x1 << 14) +#define MFPR_PULLDOWN_EN (0x1 << 13) +#define MFPR_SLEEP_SEL (0x1 << 9) +#define MFPR_SLEEP_OE_N (0x1 << 7) +#define MFPR_EDGE_CLEAR (0x1 << 6) +#define MFPR_EDGE_FALL_EN (0x1 << 5) +#define MFPR_EDGE_RISE_EN (0x1 << 4) + +#define MFPR_SLEEP_DATA(x) ((x) << 8) +#define MFPR_DRIVE(x) (((x) & 0x7) << 10) +#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) + +#define MFPR_EDGE_NONE (0) +#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) +#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) +#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) + +/* + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFPR_LPM_INPUT (0) +#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) +#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) +#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) +#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) +#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) +#define MFPR_LPM_MASK (0xe080) + +/* + * The pullup and pulldown state of the MFP pin at run mode is by default + * determined by the selected alternate function. In case that some buggy + * devices need to override this default behavior, the definitions below + * indicates the setting of corresponding MFPR bits + * + * Definition pull_sel pullup_en pulldown_en + * MFPR_PULL_NONE 0 0 0 + * MFPR_PULL_LOW 1 0 1 + * MFPR_PULL_HIGH 1 1 0 + * MFPR_PULL_BOTH 1 1 1 + */ +#define MFPR_PULL_NONE (0) +#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) +#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) +#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) + +/* PXA3xx common MFP configurations - processor specific ones defined + * in mfp-pxa300.h and mfp-pxa320.h + */ +#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) +#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) +#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) + +#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) + +#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) + +#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) + +#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) +#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) +#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) +#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) +#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) +#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) + +#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) +#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) +#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) +#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) +#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) +#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) +#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) + +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by pxa3xx_mfp_init_addr() + * + * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" + * structure, which represents a range of MFP pins from "start" to + * "end", with the offset begining at "offset", to define a single + * pin, let "end" = -1 + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct pxa3xx_mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +/* + * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access + * to the MFPR register + */ +unsigned long pxa3xx_mfp_read(int mfp); +void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); + +/* + * pxa3xx_mfp_config - configure the MFPR registers + * + * used by board specific initialization code + */ +void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); + +/* + * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin + * index and MFPR register offset + * + * used by processor specific code + */ +void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); +void __init pxa3xx_init_mfp(void); +#endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h new file mode 100644 index 00000000000..fabd9b4df82 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h @@ -0,0 +1,491 @@ +/* + * arch/arm/mach-pxa/include/mach/mfp-pxa930.h + * + * PXA930 specific MFP configuration definitions + * + * Copyright (C) 2007-2008 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_PXA9xx_H +#define __ASM_ARCH_MFP_PXA9xx_H + +#include <mach/mfp.h> +#include <mach/mfp-pxa3xx.h> + +/* GPIO */ +#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) +#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) +#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) + +#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0) +#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0) +#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0) +#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0) + +#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0) +#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0) +#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0) +#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0) +#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0) +#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0) +#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0) +#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0) +#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0) +#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0) +#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0) +#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0) +#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0) +#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0) +#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0) +#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0) +#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0) +#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0) +#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0) +#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0) +#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0) +#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0) +#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0) +#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0) +#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0) + +#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0) +#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0) +#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0) +#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0) +#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0) +#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0) +#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0) +#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0) +#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0) +#define RDY_GPIO_62 MFP_CFG(RDY, AF0) + +/* Chip Select */ +#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH) +#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH) + +/* AC97 */ +#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3) +#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3) +#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3) +#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3) +#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3) +#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3) + +/* I2C */ +#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH) +#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH) + +#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH) +#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH) + +#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH) +#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH) + +#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH) +#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH) + +#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH) +#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH) + +#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) +#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) + +#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH) +#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH) + +/* QCI */ +#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW) +#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW) +#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW) +#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW) +#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW) +#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW) +#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW) +#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW) +#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW) +#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW) +#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW) +#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW) +#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW) +#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW) + +/* KEYPAD */ +#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT) +#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT) +#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT) +#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT) +#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT) +#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT) +#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT) +#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT) + +#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT) +#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT) +#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT) +#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT) + +#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT) +#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT) +#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT) +#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT) +#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT) +#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT) + +#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT) +#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT) +#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT) +#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT) +#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT) +#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT) +#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT) +#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1) +#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4) + +#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH) +#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH) +#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH) +#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) +#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH) +#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH) +#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH) +#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH) +#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH) + +/* LCD */ +#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1) +#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1) +#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1) +#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1) +#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1) +#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2) +#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1) +#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1) +#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1) +#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1) +#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1) +#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1) +#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1) +#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1) +#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1) +#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1) +#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1) +#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1) +#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1) +#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1) +#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1) +#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1) +#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1) +#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1) +#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1) +#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3) +#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3) +#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1) + +/* Mini-LCD */ +#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3) +#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3) +#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3) +#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3) +#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3) +#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3) +#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3) +#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3) +#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3) +#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3) +#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3) +#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3) +#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3) +#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3) +#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3) +#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3) +#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3) +#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3) +#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3) +#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3) +#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5) + +/* MMC1 */ +#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4) +#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4) +#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4) +#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4) +#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4) +#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4) +#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3) +#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3) +#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3) +#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3) +#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3) +#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3) + +#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2) +#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2) +#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2) +#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3) +#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2) + +/* MMC2 */ +#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7) +#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7) +#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7) +#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7) +#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7) +#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7) + +#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1) +#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1) +#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1) +#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1) +#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1) +#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1) + +#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3) +#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3) +#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3) +#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3) +#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3) +#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3) + +/* BSSP1 */ +#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3) +#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3) +#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3) +#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3) +#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5) +#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5) + +/* BSSP2 */ +#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1) +#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1) +#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1) +#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1) +#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1) +#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4) + +/* BSSP3 */ +#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1) +#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1) +#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1) +#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1) +#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1) + +/* BSSP4 */ +#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4) +#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4) +#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4) +#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4) + +#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4) +#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4) +#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4) +#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4) + +/* GSSP1 */ +#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2) +#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2) +#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2) +#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2) +#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2) + +#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4) +#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4) +#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4) +#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4) + +/* GSSP2 */ +#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4) +#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4) +#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4) +#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4) + +#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4) +#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4) +#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4) +#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4) + +#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2) +#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2) +#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2) +#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2) +#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2) +#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5) + +#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2) +#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2) +#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2) +#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2) + +/* UART1 - FFUART */ +#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1) +#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1) +#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1) +#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1) +#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1) +#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1) +#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1) +#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1) + +#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2) +#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2) +#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2) +#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2) +#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2) +#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2) +#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2) +#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2) + +/* UART2 - BTUART */ +#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1) +#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1) +#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1) +#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1) + +/* UART3 - STUART */ +#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3) +#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3) +#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3) +#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3) + +#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5) +#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5) +#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5) +#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5) + +/* DFI */ +#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2) +#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2) +#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2) +#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2) +#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2) +#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2) +#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2) +#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2) +#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2) +#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2) +#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2) +#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2) +#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2) +#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2) +#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2) +#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2) +#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2) +#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2) +#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2) +#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2) +#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2) +#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2) + +/* DFI - NAND */ +#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH) +#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW) +#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW) +#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW) +#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW) +#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW) +#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW) +#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW) +#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW) +#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW) +#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW) +#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW) +#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW) +#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW) +#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW) +#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW) +#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW) +#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW) +#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH) +#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH) +#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH) +#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH) +#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH) +#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH) +#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH) + +/* PWM */ +#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW) +#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW) +#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW) +#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW) +#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW) +#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW) + +/* CIR */ +#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1) +#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3) + +/* USB P2 */ +#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3) +#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5) +#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2) +#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7) +#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6) +#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3) + +#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2) +#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT) +#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2) +#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2) +#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2) +#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2) +#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2) +#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2) + +#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3) +#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3) +#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3) +#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3) +#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3) +#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3) +#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3) +#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3) + +/* ULPI */ +#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4) +#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7) +#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5) +#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5) +#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5) +#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5) +#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5) +#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5) +#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4) +#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4) +#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4) +#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4) + +#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3) +#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7) +#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5) +#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4) +#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3) +#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3) + +#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5) +#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7) +#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5) +#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4) + +#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3) +#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7) +#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3) +#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5) +#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4) +#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3) + +/* 1 wire */ +#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5) + +#endif /* __ASM_ARCH_MFP_PXA9xx_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h new file mode 100644 index 00000000000..8769567b389 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mfp.h @@ -0,0 +1,319 @@ +/* + * arch/arm/mach-pxa/include/mach/mfp.h + * + * Multi-Function Pin Definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * 2007-8-21: eric miao <eric.miao@marvell.com> + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_H +#define __ASM_ARCH_MFP_H + +#define mfp_to_gpio(m) ((m) % 128) + +/* list of all the configurable MFP pins */ +enum { + MFP_PIN_INVALID = -1, + + MFP_PIN_GPIO0 = 0, + MFP_PIN_GPIO1, + MFP_PIN_GPIO2, + MFP_PIN_GPIO3, + MFP_PIN_GPIO4, + MFP_PIN_GPIO5, + MFP_PIN_GPIO6, + MFP_PIN_GPIO7, + MFP_PIN_GPIO8, + MFP_PIN_GPIO9, + MFP_PIN_GPIO10, + MFP_PIN_GPIO11, + MFP_PIN_GPIO12, + MFP_PIN_GPIO13, + MFP_PIN_GPIO14, + MFP_PIN_GPIO15, + MFP_PIN_GPIO16, + MFP_PIN_GPIO17, + MFP_PIN_GPIO18, + MFP_PIN_GPIO19, + MFP_PIN_GPIO20, + MFP_PIN_GPIO21, + MFP_PIN_GPIO22, + MFP_PIN_GPIO23, + MFP_PIN_GPIO24, + MFP_PIN_GPIO25, + MFP_PIN_GPIO26, + MFP_PIN_GPIO27, + MFP_PIN_GPIO28, + MFP_PIN_GPIO29, + MFP_PIN_GPIO30, + MFP_PIN_GPIO31, + MFP_PIN_GPIO32, + MFP_PIN_GPIO33, + MFP_PIN_GPIO34, + MFP_PIN_GPIO35, + MFP_PIN_GPIO36, + MFP_PIN_GPIO37, + MFP_PIN_GPIO38, + MFP_PIN_GPIO39, + MFP_PIN_GPIO40, + MFP_PIN_GPIO41, + MFP_PIN_GPIO42, + MFP_PIN_GPIO43, + MFP_PIN_GPIO44, + MFP_PIN_GPIO45, + MFP_PIN_GPIO46, + MFP_PIN_GPIO47, + MFP_PIN_GPIO48, + MFP_PIN_GPIO49, + MFP_PIN_GPIO50, + MFP_PIN_GPIO51, + MFP_PIN_GPIO52, + MFP_PIN_GPIO53, + MFP_PIN_GPIO54, + MFP_PIN_GPIO55, + MFP_PIN_GPIO56, + MFP_PIN_GPIO57, + MFP_PIN_GPIO58, + MFP_PIN_GPIO59, + MFP_PIN_GPIO60, + MFP_PIN_GPIO61, + MFP_PIN_GPIO62, + MFP_PIN_GPIO63, + MFP_PIN_GPIO64, + MFP_PIN_GPIO65, + MFP_PIN_GPIO66, + MFP_PIN_GPIO67, + MFP_PIN_GPIO68, + MFP_PIN_GPIO69, + MFP_PIN_GPIO70, + MFP_PIN_GPIO71, + MFP_PIN_GPIO72, + MFP_PIN_GPIO73, + MFP_PIN_GPIO74, + MFP_PIN_GPIO75, + MFP_PIN_GPIO76, + MFP_PIN_GPIO77, + MFP_PIN_GPIO78, + MFP_PIN_GPIO79, + MFP_PIN_GPIO80, + MFP_PIN_GPIO81, + MFP_PIN_GPIO82, + MFP_PIN_GPIO83, + MFP_PIN_GPIO84, + MFP_PIN_GPIO85, + MFP_PIN_GPIO86, + MFP_PIN_GPIO87, + MFP_PIN_GPIO88, + MFP_PIN_GPIO89, + MFP_PIN_GPIO90, + MFP_PIN_GPIO91, + MFP_PIN_GPIO92, + MFP_PIN_GPIO93, + MFP_PIN_GPIO94, + MFP_PIN_GPIO95, + MFP_PIN_GPIO96, + MFP_PIN_GPIO97, + MFP_PIN_GPIO98, + MFP_PIN_GPIO99, + MFP_PIN_GPIO100, + MFP_PIN_GPIO101, + MFP_PIN_GPIO102, + MFP_PIN_GPIO103, + MFP_PIN_GPIO104, + MFP_PIN_GPIO105, + MFP_PIN_GPIO106, + MFP_PIN_GPIO107, + MFP_PIN_GPIO108, + MFP_PIN_GPIO109, + MFP_PIN_GPIO110, + MFP_PIN_GPIO111, + MFP_PIN_GPIO112, + MFP_PIN_GPIO113, + MFP_PIN_GPIO114, + MFP_PIN_GPIO115, + MFP_PIN_GPIO116, + MFP_PIN_GPIO117, + MFP_PIN_GPIO118, + MFP_PIN_GPIO119, + MFP_PIN_GPIO120, + MFP_PIN_GPIO121, + MFP_PIN_GPIO122, + MFP_PIN_GPIO123, + MFP_PIN_GPIO124, + MFP_PIN_GPIO125, + MFP_PIN_GPIO126, + MFP_PIN_GPIO127, + MFP_PIN_GPIO0_2, + MFP_PIN_GPIO1_2, + MFP_PIN_GPIO2_2, + MFP_PIN_GPIO3_2, + MFP_PIN_GPIO4_2, + MFP_PIN_GPIO5_2, + MFP_PIN_GPIO6_2, + MFP_PIN_GPIO7_2, + MFP_PIN_GPIO8_2, + MFP_PIN_GPIO9_2, + MFP_PIN_GPIO10_2, + MFP_PIN_GPIO11_2, + MFP_PIN_GPIO12_2, + MFP_PIN_GPIO13_2, + MFP_PIN_GPIO14_2, + MFP_PIN_GPIO15_2, + MFP_PIN_GPIO16_2, + MFP_PIN_GPIO17_2, + + MFP_PIN_ULPI_STP, + MFP_PIN_ULPI_NXT, + MFP_PIN_ULPI_DIR, + + MFP_PIN_nXCVREN, + MFP_PIN_DF_CLE_nOE, + MFP_PIN_DF_nADV1_ALE, + MFP_PIN_DF_SCLK_E, + MFP_PIN_DF_SCLK_S, + MFP_PIN_nBE0, + MFP_PIN_nBE1, + MFP_PIN_DF_nADV2_ALE, + MFP_PIN_DF_INT_RnB, + MFP_PIN_DF_nCS0, + MFP_PIN_DF_nCS1, + MFP_PIN_nLUA, + MFP_PIN_nLLA, + MFP_PIN_DF_nWE, + MFP_PIN_DF_ALE_nWE, + MFP_PIN_DF_nRE_nOE, + MFP_PIN_DF_ADDR0, + MFP_PIN_DF_ADDR1, + MFP_PIN_DF_ADDR2, + MFP_PIN_DF_ADDR3, + MFP_PIN_DF_IO0, + MFP_PIN_DF_IO1, + MFP_PIN_DF_IO2, + MFP_PIN_DF_IO3, + MFP_PIN_DF_IO4, + MFP_PIN_DF_IO5, + MFP_PIN_DF_IO6, + MFP_PIN_DF_IO7, + MFP_PIN_DF_IO8, + MFP_PIN_DF_IO9, + MFP_PIN_DF_IO10, + MFP_PIN_DF_IO11, + MFP_PIN_DF_IO12, + MFP_PIN_DF_IO13, + MFP_PIN_DF_IO14, + MFP_PIN_DF_IO15, + + /* additional pins on PXA930 */ + MFP_PIN_GSIM_UIO, + MFP_PIN_GSIM_UCLK, + MFP_PIN_GSIM_UDET, + MFP_PIN_GSIM_nURST, + MFP_PIN_PMIC_INT, + MFP_PIN_RDY, + + MFP_PIN_MAX, +}; + +/* + * a possible MFP configuration is represented by a 32-bit integer + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State + * + * to facilitate the definition, the following macros are provided + * + * MFP_CFG_DEFAULT - default MFP configuration value, with + * alternate function = 0, + * drive strength = fast 3mA (MFP_DS03X) + * low power mode = default + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + */ + +typedef unsigned long mfp_cfg_t; + +#define MFP_PIN(x) ((x) & 0x3ff) + +#define MFP_AF0 (0x0 << 10) +#define MFP_AF1 (0x1 << 10) +#define MFP_AF2 (0x2 << 10) +#define MFP_AF3 (0x3 << 10) +#define MFP_AF4 (0x4 << 10) +#define MFP_AF5 (0x5 << 10) +#define MFP_AF6 (0x6 << 10) +#define MFP_AF7 (0x7 << 10) +#define MFP_AF_MASK (0x7 << 10) +#define MFP_AF(x) (((x) >> 10) & 0x7) + +#define MFP_DS01X (0x0 << 13) +#define MFP_DS02X (0x1 << 13) +#define MFP_DS03X (0x2 << 13) +#define MFP_DS04X (0x3 << 13) +#define MFP_DS06X (0x4 << 13) +#define MFP_DS08X (0x5 << 13) +#define MFP_DS10X (0x6 << 13) +#define MFP_DS13X (0x7 << 13) +#define MFP_DS_MASK (0x7 << 13) +#define MFP_DS(x) (((x) >> 13) & 0x7) + +#define MFP_LPM_INPUT (0x0 << 16) +#define MFP_LPM_DRIVE_LOW (0x1 << 16) +#define MFP_LPM_DRIVE_HIGH (0x2 << 16) +#define MFP_LPM_PULL_LOW (0x3 << 16) +#define MFP_LPM_PULL_HIGH (0x4 << 16) +#define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_STATE_MASK (0x7 << 16) +#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) + +#define MFP_LPM_EDGE_NONE (0x0 << 19) +#define MFP_LPM_EDGE_RISE (0x1 << 19) +#define MFP_LPM_EDGE_FALL (0x2 << 19) +#define MFP_LPM_EDGE_BOTH (0x3 << 19) +#define MFP_LPM_EDGE_MASK (0x3 << 19) +#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) + +#define MFP_PULL_NONE (0x0 << 21) +#define MFP_PULL_LOW (0x1 << 21) +#define MFP_PULL_HIGH (0x2 << 21) +#define MFP_PULL_BOTH (0x3 << 21) +#define MFP_PULL_MASK (0x3 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x3) + +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ + MFP_LPM_EDGE_NONE | MFP_PULL_NONE) + +#define MFP_CFG(pin, af) \ + ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) + +#define MFP_CFG_DRV(pin, af, drv) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) + +#define MFP_CFG_LPM(pin, af, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) + +#define MFP_CFG_X(pin, af, drv, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) + +#endif /* __ASM_ARCH_MFP_H */ diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h new file mode 100644 index 00000000000..6d1304c9270 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mmc.h @@ -0,0 +1,23 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include <linux/mmc/host.h> +#include <linux/interrupt.h> + +struct device; +struct mmc_host; + +struct pxamci_platform_data { + unsigned int ocr_mask; /* available voltages */ + unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ + int (*init)(struct device *, irq_handler_t , void *); + int (*get_ro)(struct device *); + void (*setpower)(struct device *, unsigned int); + void (*exit)(struct device *, void *); +}; + +extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); + +#endif diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h new file mode 100644 index 00000000000..351f32f13ce --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -0,0 +1,37 @@ +/* + * MTD primitives for XIP support. Architecture specific functions + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ + */ + +#ifndef __ARCH_PXA_MTD_XIP_H__ +#define __ARCH_PXA_MTD_XIP_H__ + +#include <mach/pxa-regs.h> + +#define xip_irqpending() (ICIP & ICMR) + +/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ +#define xip_currtime() (OSCR) +#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) + +/* + * xip_cpu_idle() is used when waiting for a delay equal or larger than + * the system timer tick period. This should put the CPU into idle mode + * to save power and to be woken up only when some interrupts are pending. + * As above, this should not rely upon standard kernel code. + */ + +#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) + +#endif /* __ARCH_PXA_MTD_XIP_H__ */ diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h new file mode 100644 index 00000000000..e848a47128c --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/ohci.h @@ -0,0 +1,20 @@ +#ifndef ASMARM_ARCH_OHCI_H +#define ASMARM_ARCH_OHCI_H + +struct device; + +struct pxaohci_platform_data { + int (*init)(struct device *); + void (*exit)(struct device *); + + int port_mode; +#define PMM_NPS_MODE 1 +#define PMM_GLOBAL_MODE 2 +#define PMM_PERPORT_MODE 3 + + int power_budget; +}; + +extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h new file mode 100644 index 00000000000..1e8bccbda51 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -0,0 +1,106 @@ +/* + * GPIOs and interrupts for Palm T|X Handheld Computer + * + * Based on palmld-gpio.h by Alex Osborne + * + * Authors: Marek Vasut <marek.vasut@gmail.com> + * Cristiano P. <cristianop@users.sourceforge.net> + * Jan Herman <2hp@seznam.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTX_H_ +#define _INCLUDE_PALMTX_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTX_GPIO_RESET 1 + +#define GPIO_NR_PALMTX_POWER_DETECT 12 /* 90 */ +#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMTX_EARPHONE_DETECT 107 + +/* SD/MMC */ +#define GPIO_NR_PALMTX_SD_DETECT_N 14 +#define GPIO_NR_PALMTX_SD_POWER 114 /* probably */ +#define GPIO_NR_PALMTX_SD_READONLY 115 /* probably */ + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMTX_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTX_IR_DISABLE 40 + +/* USB */ +#define GPIO_NR_PALMTX_USB_DETECT_N 13 +#define GPIO_NR_PALMTX_USB_POWER 95 +#define GPIO_NR_PALMTX_USB_PULLUP 93 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTX_BL_POWER 84 +#define GPIO_NR_PALMTX_LCD_POWER 96 + +/* LCD BORDER */ +#define GPIO_NR_PALMTX_BORDER_SWITCH 98 +#define GPIO_NR_PALMTX_BORDER_SELECT 22 + +/* BLUETOOTH */ +#define GPIO_NR_PALMTX_BT_POWER 17 +#define GPIO_NR_PALMTX_BT_RESET 83 + +/* PCMCIA (WiFi) */ +#define GPIO_NR_PALMTX_PCMCIA_POWER1 94 +#define GPIO_NR_PALMTX_PCMCIA_POWER2 108 +#define GPIO_NR_PALMTX_PCMCIA_RESET 79 +#define GPIO_NR_PALMTX_PCMCIA_READY 116 + +/* NAND Flash ... this GPIO may be incorrect! */ +#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) +#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) +#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) +#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) + +/** HERE ARE INIT VALUES **/ + +/* Various addresses */ +#define PALMTX_PCMCIA_PHYS 0x28000000 +#define PALMTX_PCMCIA_VIRT 0xf0000000 +#define PALMTX_PCMCIA_SIZE 0x100000 + +#define PALMTX_PHYS_RAM_START 0xa0000000 +#define PALMTX_PHYS_IO_START 0x40000000 + +#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ +#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ + +/* TOUCHSCREEN */ +#define AC97_LINK_FRAME 21 + + +/* BATTERY */ +#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTX_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#define PALMTX_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMTX_MAX_INTENSITY 0xFE +#define PALMTX_DEFAULT_INTENSITY 0x7E +#define PALMTX_LIMIT_MASK 0x7F +#define PALMTX_PRESCALER 0x3F +#define PALMTX_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h new file mode 100644 index 00000000000..4dcd2e8baa6 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -0,0 +1,75 @@ +/* + * arch/arm/mach-pxa/include/mach/pcm027.h + * + * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> + * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Definitions of CPU card resources only + */ + +/* I2C RTC */ +#define PCM027_RTC_IRQ_GPIO 0 +#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) +#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define ADR_PCM027_RTC 0x51 /* I2C address */ + +/* I2C EEPROM */ +#define ADR_PCM027_EEPROM 0x54 /* I2C address */ + +/* Ethernet chip (SMSC91C111) */ +#define PCM027_ETH_IRQ_GPIO 52 +#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) +#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING +#define PCM027_ETH_PHYS PXA_CS5_PHYS +#define PCM027_ETH_SIZE (1*1024*1024) + +/* CAN controller SJA1000 (unsupported yet) */ +#define PCM027_CAN_IRQ_GPIO 114 +#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) +#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define PCM027_CAN_PHYS 0x22000000 +#define PCM027_CAN_SIZE 0x100 + +/* SPI GPIO expander (unsupported yet) */ +#define PCM027_EGPIO_IRQ_GPIO 27 +#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) +#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define PCM027_EGPIO_CS 24 +/* + * TODO: Switch this pin from dedicated usage to GPIO if + * more than the MAX7301 device is connected to this SPI bus + */ +#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD + +/* Flash memory */ +#define PCM027_FLASH_PHYS 0x00000000 +#define PCM027_FLASH_SIZE 0x02000000 + +/* onboard LEDs connected to GPIO */ +#define PCM027_LED_CPU 90 +#define PCM027_LED_HEARD_BEAT 91 + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + * TODO: Add your own basebaord init function and call it from + * inside pcm027_init(). This example here is for the developmen board. + * Refer pcm990-baseboard.c + */ +extern void pcm990_baseboard_init(void); diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h new file mode 100644 index 00000000000..8a4383b776d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -0,0 +1,275 @@ +/* + * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h + * + * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> + * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <mach/pcm027.h> + +/* + * definitions relevant only when the PCM-990 + * development base board is in use + */ + +/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ +#define PCM990_CTRL_INT_IRQ_GPIO 9 +#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) +#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING +#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ +#define PCM990_CTRL_BASE 0xea000000 +#define PCM990_CTRL_SIZE (1*1024*1024) + +#define PCM990_CTRL_PWR_IRQ_GPIO 14 +#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) +#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING + +/* visible CPLD (U7) registers */ +#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ +#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */ +#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */ +#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */ + +#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */ +#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */ +#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */ +#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */ + +#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */ +#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */ +#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */ +#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */ + +#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */ +#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */ +#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */ +#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */ +#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */ + +#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */ +#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */ + +#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */ +#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */ +#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */ +#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ +#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ + +#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */ +#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */ +#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */ +#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */ +#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */ + +#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */ +#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */ +#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */ +#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */ +#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */ + +#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */ +#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */ +#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */ +#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */ +#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */ + +#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */ +#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */ +#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */ +#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */ + +#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */ +#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */ +#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */ + +#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */ +#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */ +#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */ +#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */ +#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */ + +#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE) +#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS) + +#ifndef __ASSEMBLY__ +# define __PCM990_CTRL_REG(x) \ + (*((volatile unsigned char *)PCM990_CTRL_P2V(x))) +#else +# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x) +#endif + +#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) +#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) +#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0) +#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1) +#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2) +#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) +#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4) +#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) +#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) +#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) +#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8) +#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9) +#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10) +#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11) + + +/* + * IDE + */ +#define PCM990_IDE_IRQ_GPIO 13 +#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) +#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING +#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ +#define PCM990_IDE_PLD_BASE 0xee000000 +#define PCM990_IDE_PLD_SIZE (1*1024*1024) + +/* visible CPLD (U6) registers */ +#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */ +#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */ +#define PCM990_IDE_STBY 0x0008 /* R System StandBy */ + +#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */ +#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */ +#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */ +#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */ + +#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */ +#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */ +#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */ +#define PCM990_IDE_RDY 0x0008 /* RDY */ + +#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */ +#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */ +#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */ +#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */ + +#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */ +#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */ +#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */ +#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */ + +#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE) +#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS) + +#ifndef __ASSEMBLY__ +# define __PCM990_IDE_PLD_REG(x) \ + (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x))) +#else +# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x) +#endif + +#define PCM990_IDE0 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0) +#define PCM990_IDE1 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1) +#define PCM990_IDE2 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2) +#define PCM990_IDE3 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3) +#define PCM990_IDE4 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4) + +/* + * Compact Flash + */ +#define PCM990_CF_IRQ_GPIO 11 +#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) +#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING + +#define PCM990_CF_CD_GPIO 12 +#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) +#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING + +#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ +#define PCM990_CF_PLD_BASE 0xef000000 +#define PCM990_CF_PLD_SIZE (1*1024*1024) +#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE) +#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS) + +/* visible CPLD (U6) registers */ +#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */ +#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */ +#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */ +#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */ +#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */ + +#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */ +#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */ +#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */ + +#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */ +#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */ +#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */ +#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */ + +#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */ +#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */ +#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */ +#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */ +#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */ + +#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */ +#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */ +#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */ +#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */ +#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */ + +#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */ +#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */ +#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */ +#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */ +#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */ + +#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */ +#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ +#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ + +#ifndef __ASSEMBLY__ +# define __PCM990_CF_PLD_REG(x) \ + (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x))) +#else +# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x) +#endif + +#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0) +#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1) +#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2) +#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3) +#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4) +#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5) +#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6) + +/* + * Wolfson AC97 Touch + */ +#define PCM990_AC97_IRQ_GPIO 10 +#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) +#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING + +/* + * MMC phyCORE + */ +#define PCM990_MMC0_IRQ_GPIO 9 +#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) +#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING + +/* + * USB phyCore + */ +#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN) +#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT) diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h new file mode 100644 index 00000000000..261e5bc958d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/suspend.h> + +struct pxa_cpu_pm_fns { + int save_count; + void (*save)(unsigned long *); + void (*restore)(unsigned long *); + int (*valid)(suspend_state_t state); + void (*enter)(suspend_state_t state); +}; + +extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; + +/* sleep.S */ +extern void pxa25x_cpu_suspend(unsigned int); +extern void pxa27x_cpu_suspend(unsigned int); +extern void pxa_cpu_resume(void); + +extern int pxa_pm_enter(suspend_state_t state); diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h new file mode 100644 index 00000000000..8956afe8195 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -0,0 +1,75 @@ +/* + * arch/arm/mach-pxa/include/mach/poodle.h + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on: + * arch/arm/mach-sa1100/include/mach/collie.h + * + * ChangeLog: + * 04-06-2001 Lineo Japan, Inc. + * 04-16-2001 SHARP Corporation + * Update to 2.6 John Lenz + */ +#ifndef __ASM_ARCH_POODLE_H +#define __ASM_ARCH_POODLE_H 1 + +/* + * GPIOs + */ +/* PXA GPIOs */ +#define POODLE_GPIO_ON_KEY (0) +#define POODLE_GPIO_AC_IN (1) +#define POODLE_GPIO_CO 16 +#define POODLE_GPIO_TP_INT (5) +#define POODLE_GPIO_WAKEUP (11) /* change battery */ +#define POODLE_GPIO_GA_INT (10) +#define POODLE_GPIO_IR_ON (22) +#define POODLE_GPIO_HP_IN (4) +#define POODLE_GPIO_CF_IRQ (17) +#define POODLE_GPIO_CF_CD (14) +#define POODLE_GPIO_CF_STSCHG (14) +#define POODLE_GPIO_SD_PWR (33) +#define POODLE_GPIO_SD_PWR1 (3) +#define POODLE_GPIO_nSD_CLK (6) +#define POODLE_GPIO_nSD_WP (7) +#define POODLE_GPIO_nSD_INT (8) +#define POODLE_GPIO_nSD_DETECT (9) +#define POODLE_GPIO_MAIN_BAT_LOW (13) +#define POODLE_GPIO_BAT_COVER (13) +#define POODLE_GPIO_USB_PULLUP (20) +#define POODLE_GPIO_ADC_TEMP_ON (21) +#define POODLE_GPIO_BYPASS_ON (36) +#define POODLE_GPIO_CHRG_ON (38) +#define POODLE_GPIO_CHRG_FULL (16) +#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ + +/* PXA GPIOs */ +#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) +#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1) +#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4) +#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16) +#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5) +#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11) +#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10) +#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) +#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14) +#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8) +#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) +#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13) + +/* SCOOP GPIOs */ +#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 +#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13 +#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18 +#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20 +#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21 +#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22 + +#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) +#define POODLE_SCOOP_IO_OUT ( 0 ) + +extern struct platform_device poodle_locomo_device; + +#endif /* __ASM_ARCH_POODLE_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h new file mode 100644 index 00000000000..12288ca3cbb --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -0,0 +1,1070 @@ +/* + * arch/arm/mach-pxa/include/mach/pxa-regs.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PXA_REGS_H +#define __PXA_REGS_H + + +/* + * PXA Chip selects + */ + +#define PXA_CS0_PHYS 0x00000000 +#define PXA_CS1_PHYS 0x04000000 +#define PXA_CS2_PHYS 0x08000000 +#define PXA_CS3_PHYS 0x0C000000 +#define PXA_CS4_PHYS 0x10000000 +#define PXA_CS5_PHYS 0x14000000 + + +/* + * Personal Computer Memory Card International Association (PCMCIA) sockets + */ + +#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ +#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ +#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ +#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ +#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ + +#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ +#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ +#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ +#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ + +#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ +#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ +#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ +#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ + +#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ + (0x20000000 + (Nb)*PCMCIASp) +#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ +#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ + (_PCMCIA (Nb) + 2*PCMCIAPrtSp) +#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ + (_PCMCIA (Nb) + 3*PCMCIAPrtSp) + +#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ +#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ +#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ +#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ + +#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ +#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ +#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ +#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ + + + +/* + * DMA Controller + */ + +#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ +#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ +#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ +#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ +#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ +#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ +#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ +#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ +#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ +#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ +#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ +#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ +#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ +#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ +#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ +#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ + +#define DCSR(x) __REG2(0x40000000, (x) << 2) + +#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#ifdef CONFIG_PXA27x +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ +#endif +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ + +#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ +#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ + +#define DRCMR(n) (*(((n) < 64) ? \ + &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ + &__REG2(0x40001100, ((n) & 0x3f) << 2))) + +#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ +#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ +#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ +#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ +#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ +#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ +#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ +#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ +#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ +#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ +#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ +#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ +#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ +#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ +#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ +#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ +#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ +#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ +#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ +#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ +#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ +#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ +#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ +#define DRCMR23 __REG(0x4000015c) /* Reserved */ +#define DRCMR24 __REG(0x40000160) /* Reserved */ +#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ +#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ +#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ +#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ +#define DRCMR29 __REG(0x40000174) /* Reserved */ +#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ +#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ +#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ +#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ +#define DRCMR34 __REG(0x40000188) /* Reserved */ +#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ +#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ +#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ +#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ +#define DRCMR39 __REG(0x4000019C) /* Reserved */ +#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ +#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ +#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ +#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ +#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ + +#define DRCMRRXSADR DRCMR2 +#define DRCMRTXSADR DRCMR3 +#define DRCMRRXBTRBR DRCMR4 +#define DRCMRTXBTTHR DRCMR5 +#define DRCMRRXFFRBR DRCMR6 +#define DRCMRTXFFTHR DRCMR7 +#define DRCMRRXMCDR DRCMR8 +#define DRCMRRXMODR DRCMR9 +#define DRCMRTXMODR DRCMR10 +#define DRCMRRXPCDR DRCMR11 +#define DRCMRTXPCDR DRCMR12 +#define DRCMRRXSSDR DRCMR13 +#define DRCMRTXSSDR DRCMR14 +#define DRCMRRXSS2DR DRCMR15 +#define DRCMRTXSS2DR DRCMR16 +#define DRCMRRXICDR DRCMR17 +#define DRCMRTXICDR DRCMR18 +#define DRCMRRXSTRBR DRCMR19 +#define DRCMRTXSTTHR DRCMR20 +#define DRCMRRXMMC DRCMR21 +#define DRCMRTXMMC DRCMR22 +#define DRCMRRXSS3DR DRCMR66 +#define DRCMRTXSS3DR DRCMR67 +#define DRCMRUDC(x) DRCMR((x) + 24) + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ +#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ + +#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ +#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ +#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ +#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ +#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ +#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ +#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ +#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ +#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ +#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ +#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ +#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ +#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ +#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ +#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ +#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ +#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ +#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ +#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ +#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ +#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ +#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ +#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ +#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ +#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ +#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ +#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ +#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ +#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ +#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ +#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ +#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ +#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ +#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ +#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ +#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ +#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ +#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ +#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ +#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ +#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ +#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ +#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ +#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ +#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ +#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ +#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ +#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ +#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ +#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ +#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ +#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ +#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ +#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ +#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ +#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ +#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ +#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ +#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ +#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ +#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ +#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ +#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ +#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ + +#define DDADR(x) __REG2(0x40000200, (x) << 4) +#define DSADR(x) __REG2(0x40000204, (x) << 4) +#define DTADR(x) __REG2(0x40000208, (x) << 4) +#define DCMD(x) __REG2(0x4000020c, (x) << 4) + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ +#define DDADR_STOP (1 << 0) /* Stop (read / write) */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + + +/* + * UARTs + */ + +/* Full Function UART (FFUART) */ +#define FFUART FFRBR +#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ +#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ +#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ +#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ +#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ +#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ +#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ +#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ +#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ +#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ +#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ +#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Bluetooth UART (BTUART) */ +#define BTUART BTRBR +#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ +#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ +#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ +#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ +#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ +#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ +#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ +#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ +#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ +#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ +#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ +#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Standard UART (STUART) */ +#define STUART STRBR +#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ +#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ +#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ +#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ +#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ +#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ +#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ +#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ +#define STMSR __REG(0x40700018) /* Reserved */ +#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ +#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ +#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Hardware UART (HWUART) */ +#define HWUART HWRBR +#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ +#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ +#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ +#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ +#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ +#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ +#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ +#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ +#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ +#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ +#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ +#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ +#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ +#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ +#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +#define IER_DMAE (1 << 7) /* DMA Requests Enable */ +#define IER_UUE (1 << 6) /* UART Unit Enable */ +#define IER_NRZE (1 << 5) /* NRZ coding Enable */ +#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ +#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ +#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ +#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ +#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ + +#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ +#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ +#define IIR_TOD (1 << 3) /* Time Out Detected */ +#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ +#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ +#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ + +#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ +#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ +#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ +#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ +#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ +#define FCR_ITL_1 (0) +#define FCR_ITL_8 (FCR_ITL1) +#define FCR_ITL_16 (FCR_ITL2) +#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) + +#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ +#define LCR_SB (1 << 6) /* Set Break */ +#define LCR_STKYP (1 << 5) /* Sticky Parity */ +#define LCR_EPS (1 << 4) /* Even Parity Select */ +#define LCR_PEN (1 << 3) /* Parity Enable */ +#define LCR_STB (1 << 2) /* Stop Bit */ +#define LCR_WLS1 (1 << 1) /* Word Length Select */ +#define LCR_WLS0 (1 << 0) /* Word Length Select */ + +#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ +#define LSR_TEMT (1 << 6) /* Transmitter Empty */ +#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ +#define LSR_BI (1 << 4) /* Break Interrupt */ +#define LSR_FE (1 << 3) /* Framing Error */ +#define LSR_PE (1 << 2) /* Parity Error */ +#define LSR_OE (1 << 1) /* Overrun Error */ +#define LSR_DR (1 << 0) /* Data Ready */ + +#define MCR_LOOP (1 << 4) +#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ +#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ +#define MCR_RTS (1 << 1) /* Request to Send */ +#define MCR_DTR (1 << 0) /* Data Terminal Ready */ + +#define MSR_DCD (1 << 7) /* Data Carrier Detect */ +#define MSR_RI (1 << 6) /* Ring Indicator */ +#define MSR_DSR (1 << 5) /* Data Set Ready */ +#define MSR_CTS (1 << 4) /* Clear To Send */ +#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ +#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ +#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ +#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ + +/* + * IrSR (Infrared Selection Register) + */ +#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ +#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ +#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ +#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ +#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ + + +/* + * I2C registers + */ + +#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ +#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ +#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ +#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ +#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ + +#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ +#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ +#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ + +#define ICR_START (1 << 0) /* start bit */ +#define ICR_STOP (1 << 1) /* stop bit */ +#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +#define ICR_TB (1 << 3) /* transfer byte bit */ +#define ICR_MA (1 << 4) /* master abort */ +#define ICR_SCLE (1 << 5) /* master clock enable */ +#define ICR_IUE (1 << 6) /* unit enable */ +#define ICR_GCD (1 << 7) /* general call disable */ +#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ +#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ +#define ICR_BEIE (1 << 10) /* enable bus error ints */ +#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ +#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ +#define ICR_SADIE (1 << 13) /* slave address detected int enable */ +#define ICR_UR (1 << 14) /* unit reset */ + +#define ISR_RWM (1 << 0) /* read/write mode */ +#define ISR_ACKNAK (1 << 1) /* ack/nak status */ +#define ISR_UB (1 << 2) /* unit busy */ +#define ISR_IBB (1 << 3) /* bus busy */ +#define ISR_SSD (1 << 4) /* slave stop detected */ +#define ISR_ALD (1 << 5) /* arbitration loss detected */ +#define ISR_ITE (1 << 6) /* tx buffer empty */ +#define ISR_IRF (1 << 7) /* rx buffer full */ +#define ISR_GCAD (1 << 8) /* general call address detected */ +#define ISR_SAD (1 << 9) /* slave address detected */ +#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ + + +/* + * Serial Audio Controller + */ + +#define SACR0 __REG(0x40400000) /* Global Control Register */ +#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ +#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ +#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ +#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ +#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ + +#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ +#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ +#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ +#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ +#define SACR0_ENB (1 << 0) /* Enable I2S Link */ +#define SACR1_ENLBF (1 << 5) /* Enable Loopback */ +#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ +#define SACR1_DREC (1 << 3) /* Disable Recording Function */ +#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ + +#define SASR0_I2SOFF (1 << 7) /* Controller Status */ +#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ +#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ +#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ +#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ +#define SASR0_BSY (1 << 2) /* I2S Busy */ +#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ +#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ + +#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ +#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ + +#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ +#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ +#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ +#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ + +/* + * AC97 Controller registers + */ + +#define POCR __REG(0x40500000) /* PCM Out Control Register */ +#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ +#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ + +#define PICR __REG(0x40500004) /* PCM In Control Register */ +#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ +#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ + +#define MCCR __REG(0x40500008) /* Mic In Control Register */ +#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ +#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ + +#define GCR __REG(0x4050000C) /* Global Control Register */ +#ifdef CONFIG_PXA3xx +#define GCR_CLKBPB (1 << 31) /* Internal clock enable */ +#endif +#define GCR_nDMAEN (1 << 24) /* non DMA Enable */ +#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ +#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ +#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ +#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ +#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ +#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ +#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ +#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ +#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ +#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ + +#define POSR __REG(0x40500010) /* PCM Out Status Register */ +#define POSR_FIFOE (1 << 4) /* FIFO error */ +#define POSR_FSR (1 << 2) /* FIFO Service Request */ + +#define PISR __REG(0x40500014) /* PCM In Status Register */ +#define PISR_FIFOE (1 << 4) /* FIFO error */ +#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ +#define PISR_FSR (1 << 2) /* FIFO Service Request */ + +#define MCSR __REG(0x40500018) /* Mic In Status Register */ +#define MCSR_FIFOE (1 << 4) /* FIFO error */ +#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ +#define MCSR_FSR (1 << 2) /* FIFO Service Request */ + +#define GSR __REG(0x4050001C) /* Global Status Register */ +#define GSR_CDONE (1 << 19) /* Command Done */ +#define GSR_SDONE (1 << 18) /* Status Done */ +#define GSR_RDCS (1 << 15) /* Read Completion Status */ +#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ +#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ +#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ +#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ +#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ +#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ +#define GSR_PCR (1 << 8) /* Primary Codec Ready */ +#define GSR_MCINT (1 << 7) /* Mic In Interrupt */ +#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ +#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ +#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ +#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ +#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ +#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ + +#define CAR __REG(0x40500020) /* CODEC Access Register */ +#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ + +#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ +#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ + +#define MOCR __REG(0x40500100) /* Modem Out Control Register */ +#define MOCR_FEIE (1 << 3) /* FIFO Error */ +#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ + +#define MICR __REG(0x40500108) /* Modem In Control Register */ +#define MICR_FEIE (1 << 3) /* FIFO Error */ +#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ + +#define MOSR __REG(0x40500110) /* Modem Out Status Register */ +#define MOSR_FIFOE (1 << 4) /* FIFO error */ +#define MOSR_FSR (1 << 2) /* FIFO Service Request */ + +#define MISR __REG(0x40500118) /* Modem In Status Register */ +#define MISR_FIFOE (1 << 4) /* FIFO error */ +#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ +#define MISR_FSR (1 << 2) /* FIFO Service Request */ + +#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ + +#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ +#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ +#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ +#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ + + +/* + * Fast Infrared Communication Port + */ + +#define FICP __REG(0x40800000) /* Start of FICP area */ +#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ +#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ +#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ +#define ICDR __REG(0x4080000c) /* ICP Data Register */ +#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ +#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ + +#define ICCR0_AME (1 << 7) /* Address match enable */ +#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ +#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ +#define ICCR0_RXE (1 << 4) /* Receive enable */ +#define ICCR0_TXE (1 << 3) /* Transmit enable */ +#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ +#define ICCR0_LBM (1 << 1) /* Loopback mode */ +#define ICCR0_ITR (1 << 0) /* IrDA transmission */ + +#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ +#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ +#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ +#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ +#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ +#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ + +#ifdef CONFIG_PXA27x +#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ +#endif +#define ICSR0_FRE (1 << 5) /* Framing error */ +#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ +#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ +#define ICSR0_RAB (1 << 2) /* Receiver abort */ +#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ +#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ + +#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ +#define ICSR1_CRE (1 << 5) /* CRC error */ +#define ICSR1_EOF (1 << 4) /* End of frame */ +#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ +#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ +#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ +#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ + + +/* + * Real Time Clock + */ + +#define RCNR __REG(0x40900000) /* RTC Count Register */ +#define RTAR __REG(0x40900004) /* RTC Alarm Register */ +#define RTSR __REG(0x40900008) /* RTC Status Register */ +#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ + +#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + + +/* + * OS Timer & Match Registers + */ + +#define OSMR0 __REG(0x40A00000) /* */ +#define OSMR1 __REG(0x40A00004) /* */ +#define OSMR2 __REG(0x40A00008) /* */ +#define OSMR3 __REG(0x40A0000C) /* */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ +#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ +#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ + +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + + +/* + * Pulse Width Modulator + */ + +#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ +#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ +#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ + +#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ +#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ +#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ + + +/* + * Interrupt Controller + */ + +#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ +#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ +#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ +#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ +#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ +#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +/* + * General Purpose I/O + */ + +#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) +#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) +#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) +#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 + +#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ +#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ +#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ + +#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ +#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ +#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ + +#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ +#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ +#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ + +#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ +#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ +#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ + +#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ +#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ +#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ + +#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ +#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ + +#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ +#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ +#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ + +#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ +#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ +#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ +#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ +#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ +#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ +#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ +#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ + +#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ +#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ +#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + +/* Interrupt Controller */ + +#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) +#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) +#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) +#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) +#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) +#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) +#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) +#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) +#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) +#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) +#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) +#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) +#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) +#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ + ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) +#else + +#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) +#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) +#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) +#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) +#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) +#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) +#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +#endif + +/* + * Power Manager - see pxa2xx-regs.h + */ + +/* + * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h + */ + +/* + * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h + */ + +/* + * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h + */ + +#ifdef CONFIG_PXA27x + +/* Camera Interface */ +#define CICR0 __REG(0x50000000) +#define CICR1 __REG(0x50000004) +#define CICR2 __REG(0x50000008) +#define CICR3 __REG(0x5000000C) +#define CICR4 __REG(0x50000010) +#define CISR __REG(0x50000014) +#define CIFR __REG(0x50000018) +#define CITOR __REG(0x5000001C) +#define CIBR0 __REG(0x50000028) +#define CIBR1 __REG(0x50000030) +#define CIBR2 __REG(0x50000038) + +#define CICR0_DMAEN (1 << 31) /* DMA request enable */ +#define CICR0_PAR_EN (1 << 30) /* Parity enable */ +#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ +#define CICR0_ENB (1 << 28) /* Camera interface enable */ +#define CICR0_DIS (1 << 27) /* Camera interface disable */ +#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ +#define CICR0_TOM (1 << 9) /* Time-out mask */ +#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ +#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ +#define CICR0_EOLM (1 << 6) /* End-of-line mask */ +#define CICR0_PERRM (1 << 5) /* Parity-error mask */ +#define CICR0_QDM (1 << 4) /* Quick-disable mask */ +#define CICR0_CDM (1 << 3) /* Disable-done mask */ +#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ +#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ +#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ + +#define CICR1_TBIT (1 << 31) /* Transparency bit */ +#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ +#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ +#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ +#define CICR1_RGB_F (1 << 11) /* RGB format */ +#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ +#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ +#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ +#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ +#define CICR1_DW (0x7 << 0) /* Data width mask */ + +#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock + wait count mask */ +#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock + wait count mask */ +#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ +#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR2_FSW (0x7 << 0) /* Frame stabilization + wait count mask */ + +#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock + wait count mask */ +#define CICR3_EFW (0xff << 16) /* End-of-frame line clock + wait count mask */ +#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ +#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ + +#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ +#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ +#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ +#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ +#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ +#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ +#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ +#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ + +#define CISR_FTO (1 << 15) /* FIFO time-out */ +#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ +#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ +#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ +#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ +#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ +#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ +#define CISR_EOL (1 << 8) /* End of line */ +#define CISR_PAR_ERR (1 << 7) /* Parity error */ +#define CISR_CQD (1 << 6) /* Camera interface quick disable */ +#define CISR_CDD (1 << 5) /* Camera interface disable done */ +#define CISR_SOF (1 << 4) /* Start of frame */ +#define CISR_EOF (1 << 3) /* End of frame */ +#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ +#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ +#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ + +#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ +#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ +#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ +#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ +#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ +#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ +#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ +#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ + +#define SRAM_SIZE 0x40000 /* 4x64K */ + +#define SRAM_MEM_PHYS 0x5C000000 + +#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ +#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ + +#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ +#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ +#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ +#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ + +#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ +#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ +#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ +#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ + +#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ +#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ +#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ +#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ + +#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ +#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ +#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ +#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ + +#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ +#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ +#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ +#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ + +#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ + +#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ +#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ +#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ + +#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ +#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ +#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ + +#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ +#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ +#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ + +#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ +#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ +#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ + +#endif + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +/* + * UHC: USB Host Controller (OHCI-like) register definitions + */ +#define UHC_BASE_PHYS (0x4C000000) +#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ +#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ +#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ +#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ +#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ +#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ +#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ +#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ +#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ +#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ +#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ +#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ +#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ +#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ +#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ +#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ +#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ +#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ + +#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ +#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ + +#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ +#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ +#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ +#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ +#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ + +#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ +#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ +#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ +#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ +#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ +#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ +#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ +#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ +#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ +#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ + +#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ +#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ +#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ +#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ +#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ +#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ +#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ +#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ +#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ +#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ +#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ +#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ + +#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ +#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ +#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ +#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ +#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ +#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort + Interrupt Enable*/ +#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ +#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ + +#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ + +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ + +/* PWRMODE register M field values */ + +#define PWRMODE_IDLE 0x1 +#define PWRMODE_STANDBY 0x2 +#define PWRMODE_SLEEP 0x3 +#define PWRMODE_DEEPSLEEP 0x7 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h new file mode 100644 index 00000000000..1b80a4805a6 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h @@ -0,0 +1,163 @@ +#ifndef _ASM_ARCH_PXA25X_UDC_H +#define _ASM_ARCH_PXA25X_UDC_H + +#ifdef _ASM_ARCH_PXA27X_UDC_H +#error "You can't include both PXA25x and PXA27x UDC support" +#endif + +#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ +#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ +#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_UDE (1 << 0) /* UDC enable */ +#define UDCCR_UDA (1 << 1) /* UDC active */ +#define UDCCR_RSM (1 << 2) /* Device resume */ +#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ +#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ +#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ +#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ +#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ + +#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ +#define UDCCS0_IPR (1 << 1) /* IN packet ready */ +#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ +#define UDCCS0_SST (1 << 4) /* Sent stall */ +#define UDCCS0_FST (1 << 5) /* Force stall */ +#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ +#define UDCCS0_SA (1 << 7) /* Setup active */ + +/* Bulk IN - Endpoint 1,6,11 */ +#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ + +#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_BI_SST (1 << 4) /* Sent stall */ +#define UDCCS_BI_FST (1 << 5) /* Force stall */ +#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ + +/* Bulk OUT - Endpoint 2,7,12 */ +#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ + +#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_BO_DME (1 << 3) /* DMA enable */ +#define UDCCS_BO_SST (1 << 4) /* Sent stall */ +#define UDCCS_BO_FST (1 << 5) /* Force stall */ +#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ + +/* Isochronous IN - Endpoint 3,8,13 */ +#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ + +#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ + +/* Isochronous OUT - Endpoint 4,9,14 */ +#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ + +#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ +#define UDCCS_IO_DME (1 << 3) /* DMA enable */ +#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ + +/* Interrupt IN - Endpoint 5,10,15 */ +#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ + +#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_INT_SST (1 << 4) /* Sent stall */ +#define UDCCS_INT_FST (1 << 5) /* Force stall */ +#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ + +#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ +#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ +#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ +#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ +#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ +#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ +#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ +#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ +#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ +#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ +#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ +#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ +#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ +#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ +#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ +#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ +#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ +#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ +#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ +#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ +#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ +#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ +#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ +#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ + +#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ + +#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ +#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ +#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ +#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ +#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ +#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ +#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ +#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ + +#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ + +#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ +#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ +#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ +#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ +#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ +#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ +#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ +#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ + +#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ + +#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ +#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ +#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ +#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ +#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ +#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ +#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ +#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ + +#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ + +#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ +#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ +#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ +#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ +#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ +#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ +#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ +#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h new file mode 100644 index 00000000000..ab1443f8bd8 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h @@ -0,0 +1,257 @@ +#ifndef _ASM_ARCH_PXA27X_UDC_H +#define _ASM_ARCH_PXA27X_UDC_H + +#ifdef _ASM_ARCH_PXA25X_UDC_H +#error You cannot include both PXA25x and PXA27x UDC support +#endif + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ +#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation + Protocol Port Support */ +#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol + Support */ +#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol + Enable */ +#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ +#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ +#define UDCCR_ACN_S 11 +#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ +#define UDCCR_AIN_S 8 +#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface + Setting Number */ +#define UDCCR_AAISN_S 5 +#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active + Configuration */ +#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration + Error */ +#define UDCCR_UDR (1 << 2) /* UDC Resume */ +#define UDCCR_UDA (1 << 1) /* UDC Active */ +#define UDCCR_UDE (1 << 0) /* UDC Enable */ + +#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ +#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ +#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ +#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ +#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ +#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ +#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ +#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ + +#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ +#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ +#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ +#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ +#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ +#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ +#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ + +#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ +#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ +#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt + Rising Edge Interrupt Enable */ +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt + Falling Edge Interrupt Enable */ +#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising + Edge Interrupt Enable */ +#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling + Edge Interrupt Enable */ +#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge + Interrupt Enable */ + +#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ +#define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */ + +#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ +#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ +#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ +#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ +#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ +#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ +#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ +#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ +#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ +#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ +#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ +#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ +#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ +#define UP2OCR_SEOS(x) ((x & 7) << 24) /* Single-Ended Output Select */ + +#define UDCCSN(x) __REG2(0x40600100, (x) << 2) +#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ +#define UDCCSR0_SA (1 << 7) /* Setup Active */ +#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define UDCCSR0_FST (1 << 5) /* Force Stall */ +#define UDCCSR0_SST (1 << 4) /* Sent Stall */ +#define UDCCSR0_DME (1 << 3) /* DMA Enable */ +#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ +#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ +#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ +#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ +#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ +#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ +#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ +#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ +#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ +#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ +#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ +#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ +#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ +#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ +#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ +#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ +#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ +#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ +#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ +#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ +#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ +#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ +#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ + +#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ +#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ +#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ +#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ +#define UDCCSR_FST (1 << 5) /* Force STALL */ +#define UDCCSR_SST (1 << 4) /* Sent STALL */ +#define UDCCSR_DME (1 << 3) /* DMA Enable */ +#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ +#define UDCCSR_PC (1 << 1) /* Packet Complete */ +#define UDCCSR_FS (1 << 0) /* FIFO needs service */ + +#define UDCBCN(x) __REG2(0x40600200, (x)<<2) +#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ +#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ +#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ +#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ +#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ +#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ +#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ +#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ +#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ +#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ +#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ +#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ +#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ +#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ +#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ +#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ +#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ +#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ +#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ +#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ +#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ +#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ +#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ +#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ + +#define UDCDN(x) __REG2(0x40600300, (x)<<2) +#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) +#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) +#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ +#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ +#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ +#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ +#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ +#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ +#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ +#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ +#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ +#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ +#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ +#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ +#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ +#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ +#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ +#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ +#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ +#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ +#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ +#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ +#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ +#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ +#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ +#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ + +#define UDCCN(x) __REG2(0x40600400, (x)<<2) +#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ +#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ +#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ +#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ +#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ +#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ +#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ +#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ +#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ +#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ +#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ +#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ +#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ +#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ +#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ +#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ +#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ +#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ +#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ +#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ +#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ +#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ +#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ + +#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ +#define UDCCONR_CN_S (25) +#define UDCCONR_IN (0x07 << 22) /* Interface Number */ +#define UDCCONR_IN_S (22) +#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ +#define UDCCONR_AISN_S (19) +#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ +#define UDCCONR_EN_S (15) +#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ +#define UDCCONR_ET_S (13) +#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ +#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ +#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ +#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ +#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ +#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ +#define UDCCONR_MPS_S (2) +#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ +#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ + + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDC_FNR_MASK (0x7ff) + +#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) +#define UDC_BCR_MASK (0x3ff) + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h new file mode 100644 index 00000000000..d5a48a96dea --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h @@ -0,0 +1,58 @@ +#ifndef __ASM_ARCH_PXA27x_KEYPAD_H +#define __ASM_ARCH_PXA27x_KEYPAD_H + +#include <linux/input.h> + +#define MAX_MATRIX_KEY_ROWS (8) +#define MAX_MATRIX_KEY_COLS (8) + +/* pxa3xx keypad platform specific parameters + * + * NOTE: + * 1. direct_key_num indicates the number of keys in the direct keypad + * _plus_ the number of rotary-encoder sensor inputs, this can be + * left as 0 if only rotary encoders are enabled, the driver will + * automatically calculate this + * + * 2. direct_key_map is the key code map for the direct keys, if rotary + * encoder(s) are enabled, direct key 0/1(2/3) will be ignored + * + * 3. rotary can be either interpreted as a relative input event (e.g. + * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) + * + * 4. matrix key and direct key will use the same debounce_interval by + * default, which should be sufficient in most cases + */ +struct pxa27x_keypad_platform_data { + + /* code map for the matrix keys */ + unsigned int matrix_key_rows; + unsigned int matrix_key_cols; + unsigned int *matrix_key_map; + int matrix_key_map_size; + + /* direct keys */ + int direct_key_num; + unsigned int direct_key_map[8]; + + /* rotary encoders 0 */ + int enable_rotary0; + int rotary0_rel_code; + int rotary0_up_key; + int rotary0_down_key; + + /* rotary encoders 1 */ + int enable_rotary1; + int rotary1_rel_code; + int rotary1_up_key; + int rotary1_down_key; + + /* key debounce interval */ + unsigned int debounce_interval; +}; + +#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) + +extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); + +#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h new file mode 100644 index 00000000000..6ef1dd09970 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h @@ -0,0 +1,368 @@ +#ifndef __ASM_ARCH_PXA2XX_GPIO_H +#define __ASM_ARCH_PXA2XX_GPIO_H + +#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h + +/* GPIO alternate function assignments */ + +#define GPIO1_RST 1 /* reset */ +#define GPIO6_MMCCLK 6 /* MMC Clock */ +#define GPIO7_48MHz 7 /* 48 MHz clock output */ +#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ +#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ +#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ +#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ +#define GPIO12_32KHz 12 /* 32 kHz out */ +#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ +#define GPIO13_MBGNT 13 /* memory controller grant */ +#define GPIO14_MBREQ 14 /* alternate bus master request */ +#define GPIO15_nCS_1 15 /* chip select 1 */ +#define GPIO16_PWM0 16 /* PWM0 output */ +#define GPIO17_PWM1 17 /* PWM1 output */ +#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ +#define GPIO18_RDY 18 /* Ext. Bus Ready */ +#define GPIO19_DREQ1 19 /* External DMA Request */ +#define GPIO20_DREQ0 20 /* External DMA Request */ +#define GPIO23_SCLK 23 /* SSP clock */ +#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ +#define GPIO24_SFRM 24 /* SSP Frame */ +#define GPIO24_CIF_FV 24 /* Camera frame start signal */ +#define GPIO25_STXD 25 /* SSP transmit */ +#define GPIO25_CIF_LV 25 /* Camera line start signal */ +#define GPIO26_SRXD 26 /* SSP receive */ +#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ +#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ +#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ +#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ +#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ +#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ +#define GPIO31_SYNC 31 /* AC97/I2S sync */ +#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ +#define GPIO32_SYSCLK 32 /* I2S System Clock */ +#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ +#define GPIO33_nCS_5 33 /* chip select 5 */ +#define GPIO34_FFRXD 34 /* FFUART receive */ +#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ +#define GPIO35_FFCTS 35 /* FFUART Clear to send */ +#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ +#define GPIO37_FFDSR 37 /* FFUART data set ready */ +#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ +#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ +#define GPIO39_FFTXD 39 /* FFUART transmit data */ +#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ +#define GPIO41_FFRTS 41 /* FFUART request to send */ +#define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO42_HWRXD 42 /* HWUART receive data */ +#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ +#define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO43_HWTXD 43 /* HWUART transmit data */ +#define GPIO43_CIF_FV 43 /* Camera frame start signal */ +#define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO44_HWCTS 44 /* HWUART clear to send */ +#define GPIO44_CIF_LV 44 /* Camera line start signal */ +#define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO45_HWRTS 45 /* HWUART request to send */ +#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ +#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ +#define GPIO46_ICPRXD 46 /* ICP receive data */ +#define GPIO46_STRXD 46 /* STD_UART receive data */ +#define GPIO47_ICPTXD 47 /* ICP transmit data */ +#define GPIO47_STTXD 47 /* STD_UART transmit data */ +#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ +#define GPIO48_nPOE 48 /* Output Enable for Card Space */ +#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ +#define GPIO49_nPWE 49 /* Write Enable for Card Space */ +#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ +#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ +#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ +#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ +#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ +#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ +#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ +#define GPIO53_MMCCLK 53 /* MMC Clock */ +#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ +#define GPIO54_MMCCLK 54 /* MMC Clock */ +#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ +#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ +#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ +#define GPIO55_nPREG 55 /* Card Address bit 26 */ +#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ +#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ +#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ +#define GPIO58_LDD_0 58 /* LCD data pin 0 */ +#define GPIO59_LDD_1 59 /* LCD data pin 1 */ +#define GPIO60_LDD_2 60 /* LCD data pin 2 */ +#define GPIO61_LDD_3 61 /* LCD data pin 3 */ +#define GPIO62_LDD_4 62 /* LCD data pin 4 */ +#define GPIO63_LDD_5 63 /* LCD data pin 5 */ +#define GPIO64_LDD_6 64 /* LCD data pin 6 */ +#define GPIO65_LDD_7 65 /* LCD data pin 7 */ +#define GPIO66_LDD_8 66 /* LCD data pin 8 */ +#define GPIO66_MBREQ 66 /* alternate bus master req */ +#define GPIO67_LDD_9 67 /* LCD data pin 9 */ +#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ +#define GPIO68_LDD_10 68 /* LCD data pin 10 */ +#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ +#define GPIO69_LDD_11 69 /* LCD data pin 11 */ +#define GPIO69_MMCCLK 69 /* MMC_CLK */ +#define GPIO70_LDD_12 70 /* LCD data pin 12 */ +#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ +#define GPIO71_LDD_13 71 /* LCD data pin 13 */ +#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ +#define GPIO72_LDD_14 72 /* LCD data pin 14 */ +#define GPIO72_32kHz 72 /* 32 kHz clock */ +#define GPIO73_LDD_15 73 /* LCD data pin 15 */ +#define GPIO73_MBGNT 73 /* Memory controller grant */ +#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ +#define GPIO75_LCD_LCLK 75 /* LCD line clock */ +#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ +#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ +#define GPIO78_nCS_2 78 /* chip select 2 */ +#define GPIO79_nCS_3 79 /* chip select 3 */ +#define GPIO80_nCS_4 80 /* chip select 4 */ +#define GPIO81_NSCLK 81 /* NSSP clock */ +#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ +#define GPIO82_NSFRM 82 /* NSSP Frame */ +#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ +#define GPIO83_NSTXD 83 /* NSSP transmit */ +#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ +#define GPIO84_NSRXD 84 /* NSSP receive */ +#define GPIO84_CIF_FV 84 /* Camera frame start signal */ +#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ +#define GPIO85_CIF_LV 85 /* Camera line start signal */ +#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ +#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ +#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ +#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ +#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ +#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ +#define GPIO96_FFRXD 96 /* FFUART recieve */ +#define GPIO98_FFRTS 98 /* FFUART request to send */ +#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ +#define GPIO99_FFTXD 99 /* FFUART transmit data */ +#define GPIO100_FFCTS 100 /* FFUART Clear to send */ +#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ +#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ +#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ +#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ +#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ +#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ +#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ +#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ +#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ +#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ +#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ +#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ +#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ +#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ +#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ +#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ +#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ +#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ + +/* GPIO alternate function mode & direction */ + +#define GPIO_IN 0x000 +#define GPIO_OUT 0x080 +#define GPIO_ALT_FN_1_IN 0x100 +#define GPIO_ALT_FN_1_OUT 0x180 +#define GPIO_ALT_FN_2_IN 0x200 +#define GPIO_ALT_FN_2_OUT 0x280 +#define GPIO_ALT_FN_3_IN 0x300 +#define GPIO_ALT_FN_3_OUT 0x380 +#define GPIO_MD_MASK_NR 0x07f +#define GPIO_MD_MASK_DIR 0x080 +#define GPIO_MD_MASK_FN 0x300 +#define GPIO_DFLT_LOW 0x400 +#define GPIO_DFLT_HIGH 0x800 + +#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) +#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) +#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) +#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) +#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) +#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) +#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) +#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) +#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) +#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) +#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) +#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) +#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) +#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) +#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) +#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) +#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) +#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) +#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) +#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) +#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) +#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) +#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) +#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) +#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) +#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) +#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) +#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) +#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) +#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) +#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) +#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) +#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) +#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) +#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) +#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) +#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) +#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) +#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) +#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) +#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) +#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) +#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) +#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) +#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) +#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) +#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) +#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) +#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) +#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) +#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) +#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) +#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) +#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) +#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) +#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) +#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) +#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) +#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) +#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) +#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) +#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) +#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) +#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) +#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) +#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) +#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) +#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) +#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) +#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) +#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) +#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) +#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) +#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) +#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) +#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) +#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) +#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) +#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) +#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) +#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) +#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) +#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) +#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) +#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) +#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) +#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) +#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) +#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) +#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) +#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) +#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) +#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) +#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) +#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) +#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) +#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) +#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) +#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) +#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) +#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) +#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) +#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) +#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) +#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) +#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) +#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) +#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) +#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) +#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) +#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) +#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) +#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) +#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) +#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) +#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) +#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) +#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) +#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) +#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) +#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) +#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) +#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) +#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) +#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) +#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) +#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) +#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) +#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) +#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) +#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) +#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) +#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) +#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) +#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) +#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) +#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) +#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) +#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) +#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) +#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) +#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) +#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) +#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) +#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) +#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) +#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) +#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) +#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) +#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) +#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) +#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) + +#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h new file mode 100644 index 00000000000..806ecfea44b --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -0,0 +1,246 @@ +/* + * arch/arm/mach-pxa/include/mach/pxa2xx-regs.h + * + * Taken from pxa-regs.h by Russell King + * + * Author: Nicolas Pitre + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PXA2XX_REGS_H +#define __PXA2XX_REGS_H + +/* + * Memory controller + */ + +#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ +#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ +#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ +#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ +#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ +#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ +#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ +#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ +#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ +#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ +#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ + +/* + * More handy macros for PCMCIA + * + * Arg is socket number + */ +#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ +#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ +#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ + +/* MECR register defines */ +#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ +#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ + +#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ +#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ +#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ +#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ +#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ +#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ +#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ +#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ +#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ +#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ +#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ +#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ +#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ +#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ + + +#ifdef CONFIG_PXA27x + +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + +#endif + + +/* + * Power Manager + */ + +#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ +#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ +#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ +#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ +#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ +#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ +#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ +#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ +#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ +#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ +#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ +#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ + +#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ +#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ +#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ +#define PCMD(x) __REG2(0x40F00080, (x)<<2) +#define PCMD0 __REG(0x40F00080 + 0 * 4) +#define PCMD1 __REG(0x40F00080 + 1 * 4) +#define PCMD2 __REG(0x40F00080 + 2 * 4) +#define PCMD3 __REG(0x40F00080 + 3 * 4) +#define PCMD4 __REG(0x40F00080 + 4 * 4) +#define PCMD5 __REG(0x40F00080 + 5 * 4) +#define PCMD6 __REG(0x40F00080 + 6 * 4) +#define PCMD7 __REG(0x40F00080 + 7 * 4) +#define PCMD8 __REG(0x40F00080 + 8 * 4) +#define PCMD9 __REG(0x40F00080 + 9 * 4) +#define PCMD10 __REG(0x40F00080 + 10 * 4) +#define PCMD11 __REG(0x40F00080 + 11 * 4) +#define PCMD12 __REG(0x40F00080 + 12 * 4) +#define PCMD13 __REG(0x40F00080 + 13 * 4) +#define PCMD14 __REG(0x40F00080 + 14 * 4) +#define PCMD15 __REG(0x40F00080 + 15 * 4) +#define PCMD16 __REG(0x40F00080 + 16 * 4) +#define PCMD17 __REG(0x40F00080 + 17 * 4) +#define PCMD18 __REG(0x40F00080 + 18 * 4) +#define PCMD19 __REG(0x40F00080 + 19 * 4) +#define PCMD20 __REG(0x40F00080 + 20 * 4) +#define PCMD21 __REG(0x40F00080 + 21 * 4) +#define PCMD22 __REG(0x40F00080 + 22 * 4) +#define PCMD23 __REG(0x40F00080 + 23 * 4) +#define PCMD24 __REG(0x40F00080 + 24 * 4) +#define PCMD25 __REG(0x40F00080 + 25 * 4) +#define PCMD26 __REG(0x40F00080 + 26 * 4) +#define PCMD27 __REG(0x40F00080 + 27 * 4) +#define PCMD28 __REG(0x40F00080 + 28 * 4) +#define PCMD29 __REG(0x40F00080 + 29 * 4) +#define PCMD30 __REG(0x40F00080 + 30 * 4) +#define PCMD31 __REG(0x40F00080 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) +/* FIXME: PCMD_SQC need be checked. */ +#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, + bit 9 should be 0 all day. */ +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +#define PCFR_PI2C_EN (0x1 << 6) + +#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ +#define PSSR_RDH (1 << 5) /* Read Disable Hold */ +#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ +#define PSSR_STS (1 << 3) /* Standby Mode Status */ +#define PSSR_VFS (1 << 2) /* VDD Fault Status */ +#define PSSR_BFS (1 << 1) /* Battery Fault Status */ +#define PSSR_SSS (1 << 0) /* Software Sleep Status */ + +#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ + +#define PCFR_RO (1 << 15) /* RDH Override */ +#define PCFR_PO (1 << 14) /* PH Override */ +#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ +#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ +#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ +#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ +#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ +#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ +#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ +#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ +#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ +#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ + +#define RCSR_GPR (1 << 3) /* GPIO Reset */ +#define RCSR_SMR (1 << 2) /* Sleep Mode */ +#define RCSR_WDR (1 << 1) /* Watchdog Reset */ +#define RCSR_HWR (1 << 0) /* Hardware Reset */ + +#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ +#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ +#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ +#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ +#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ +#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ +#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ +#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ +#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ +#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ +#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ +#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ +#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ +#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ +#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ +#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ +#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ +#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ + +/* + * PXA2xx specific Core clock definitions + */ +#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ +#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ +#define CKEN __REG(0x41300004) /* Clock Enable Register */ +#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ + +#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ + +#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ +#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ +#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ +#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ +#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ +#define CKEN_IM (20) /* Internal Memory Clock Enable */ +#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ +#define CKEN_USIM (18) /* USIM Unit Clock Enable */ +#define CKEN_MSL (17) /* MSL Unit Clock Enable */ +#define CKEN_LCD (16) /* LCD Unit Clock Enable */ +#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ +#define CKEN_I2C (14) /* I2C Unit Clock Enable */ +#define CKEN_FICP (13) /* FICP Unit Clock Enable */ +#define CKEN_MMC (12) /* MMC Unit Clock Enable */ +#define CKEN_USB (11) /* USB Unit Clock Enable */ +#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ +#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ +#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ +#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ +#define CKEN_I2S (8) /* I2S Unit Clock Enable */ +#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ +#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ +#define CKEN_STUART (5) /* STUART Unit Clock Enable */ +#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ +#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ +#define CKEN_SSP (3) /* SSP Unit Clock Enable */ +#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ +#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ +#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ +#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ + +#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ +#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h new file mode 100644 index 00000000000..2206cb61a9f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PXA2XX_SPI_H_ +#define PXA2XX_SPI_H_ + +#define PXA2XX_CS_ASSERT (0x01) +#define PXA2XX_CS_DEASSERT (0x02) + +/* device.platform_data for SSP controller devices */ +struct pxa2xx_spi_master { + u32 clock_enable; + u16 num_chipselect; + u8 enable_dma; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout; + u8 enable_loopback; + void (*cs_control)(u32 command); +}; + +extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); + +#endif /*PXA2XX_SPI_H_*/ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h new file mode 100644 index 00000000000..39eb68319e2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -0,0 +1,183 @@ +/* + * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h + * + * PXA3xx specific register definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_PXA3XX_REGS_H +#define __ASM_ARCH_PXA3XX_REGS_H + +/* + * Oscillator Configuration Register (OSCC) + */ +#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ + +#define OSCC_PEN (1 << 11) /* 13MHz POUT */ + + +/* + * Service Power Management Unit (MPMU) + */ +#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ +#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ +#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ +#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ +#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ +#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ +#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ +#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ +#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ +#define PCMD(x) __REG(0x40F50110 + ((x) << 2)) + +/* + * Slave Power Managment Unit + */ +#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ +#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ +#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ +#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ +#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ +#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ +#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ +#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ +#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ +#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ +#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ +#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ +#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ +#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ + +/* + * Application Subsystem Configuration bits. + */ +#define ASCR_RDH (1 << 31) +#define ASCR_D1S (1 << 2) +#define ASCR_D2S (1 << 1) +#define ASCR_D3S (1 << 0) + +/* + * Application Reset Status bits. + */ +#define ARSR_GPR (1 << 3) +#define ARSR_LPMR (1 << 2) +#define ARSR_WDT (1 << 1) +#define ARSR_HWR (1 << 0) + +/* + * Application Subsystem Wake-Up bits. + */ +#define ADXER_WRTC (1 << 31) /* RTC */ +#define ADXER_WOST (1 << 30) /* OS Timer */ +#define ADXER_WTSI (1 << 29) /* Touchscreen */ +#define ADXER_WUSBH (1 << 28) /* USB host */ +#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ +#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ +#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ +#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ +#define ADXER_WKP (1 << 21) /* Keypad */ +#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ +#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ +#define ADXER_WOTG (1 << 16) /* USBOTG input */ +#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ +#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ +#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ +#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ +#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ +#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ +#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ +#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ +#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ +#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ +#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ +#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ +#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ +#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ +#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ +#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ + +/* + * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. + */ +#define ADXR_L2 (1 << 8) +#define ADXR_R5 (1 << 5) +#define ADXR_R4 (1 << 4) +#define ADXR_R3 (1 << 3) +#define ADXR_R2 (1 << 2) +#define ADXR_R1 (1 << 1) +#define ADXR_R0 (1 << 0) + +/* + * Values for PWRMODE CP15 register + */ +#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ +#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ +#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ +#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ +#define PXA3xx_PM_S0D0C1 0x01 + +/* + * Application Subsystem Clock + */ +#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ +#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ +#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ +#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ +#define CKENB __REG(0x41340010) /* B Clock Enable Register */ +#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ + +/* + * Clock Enable Bit + */ +#define CKEN_LCD 1 /* < LCD Clock Enable */ +#define CKEN_USBH 2 /* < USB host clock enable */ +#define CKEN_CAMERA 3 /* < Camera interface clock enable */ +#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ +#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ +#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ +#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ +#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ +#define CKEN_BOOT 11 /* < Boot rom clock enable */ +#define CKEN_MMC1 12 /* < MMC1 Clock enable */ +#define CKEN_MMC2 13 /* < MMC2 clock enable */ +#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ +#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ +#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ +#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ +#define CKEN_TPM 19 /* < TPM clock enable */ +#define CKEN_UDC 20 /* < UDC clock enable */ +#define CKEN_BTUART 21 /* < BTUART clock enable */ +#define CKEN_FFUART 22 /* < FFUART clock enable */ +#define CKEN_STUART 23 /* < STUART clock enable */ +#define CKEN_AC97 24 /* < AC97 clock enable */ +#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ +#define CKEN_SSP1 26 /* < SSP1 clock enable */ +#define CKEN_SSP2 27 /* < SSP2 clock enable */ +#define CKEN_SSP3 28 /* < SSP3 clock enable */ +#define CKEN_SSP4 29 /* < SSP4 clock enable */ +#define CKEN_MSL0 30 /* < MSL0 clock enable */ +#define CKEN_PWM0 32 /* < PWM[0] clock enable */ +#define CKEN_PWM1 33 /* < PWM[1] clock enable */ +#define CKEN_I2C 36 /* < I2C clock enable */ +#define CKEN_INTC 38 /* < Interrupt controller clock enable */ +#define CKEN_GPIO 39 /* < GPIO clock enable */ +#define CKEN_1WIRE 40 /* < 1-wire clock enable */ +#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ +#define CKEN_MINI_IM 48 /* < Mini-IM */ +#define CKEN_MINI_LCD 49 /* < Mini LCD */ + +#if defined(CONFIG_CPU_PXA310) +#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ +#define CKEN_MVED 43 /* < MVED clock enable */ +#endif + +/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ +#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ +#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ + +#endif /* __ASM_ARCH_PXA3XX_REGS_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h new file mode 100644 index 00000000000..eb4b190b665 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h @@ -0,0 +1,20 @@ +#ifndef __ASM_ARCH_PXA3XX_NAND_H +#define __ASM_ARCH_PXA3XX_NAND_H + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +struct pxa3xx_nand_platform_data { + + /* the data flash bus is shared between the Static Memory + * Controller and the Data Flash Controller, the arbiter + * controls the ownership of the bus + */ + int enable_arbiter; + + struct mtd_partition *parts; + unsigned int nr_parts; +}; + +extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); +#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h new file mode 100644 index 00000000000..65447549616 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -0,0 +1,151 @@ +/* + * arch/arm/mach-pxa/include/mach/pxafb.h + * + * Support for the xscale frame buffer. + * + * Author: Jean-Frederic Clere + * Created: Sep 22, 2003 + * Copyright: jfclere@sinix.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/fb.h> +#include <mach/regs-lcd.h> + +/* + * Supported LCD connections + * + * bits 0 - 3: for LCD panel type: + * + * STN - for passive matrix + * DSTN - for dual scan passive matrix + * TFT - for active matrix + * + * bits 4 - 9 : for bus width + * bits 10-17 : for AC Bias Pin Frequency + * bit 18 : for output enable polarity + * bit 19 : for pixel clock edge + */ +#define LCD_CONN_TYPE(_x) ((_x) & 0x0f) +#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) + +#define LCD_TYPE_UNKNOWN 0 +#define LCD_TYPE_MONO_STN 1 +#define LCD_TYPE_MONO_DSTN 2 +#define LCD_TYPE_COLOR_STN 3 +#define LCD_TYPE_COLOR_DSTN 4 +#define LCD_TYPE_COLOR_TFT 5 +#define LCD_TYPE_SMART_PANEL 6 +#define LCD_TYPE_MAX 7 + +#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) +#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) +#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) +#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) + +#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) +#define LCD_BIAS_ACTIVE_HIGH (0 << 17) +#define LCD_BIAS_ACTIVE_LOW (1 << 17) +#define LCD_PCLK_EDGE_RISE (0 << 18) +#define LCD_PCLK_EDGE_FALL (1 << 18) + +/* + * This structure describes the machine which we are running on. + * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine + * of linux/drivers/video/pxafb.c + */ +struct pxafb_mode_info { + u_long pixclock; + + u_short xres; + u_short yres; + + u_char bpp; + u_int cmap_greyscale:1, + depth:8, + unused:23; + + /* Parallel Mode Timing */ + u_char hsync_len; + u_char left_margin; + u_char right_margin; + + u_char vsync_len; + u_char upper_margin; + u_char lower_margin; + u_char sync; + + /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details + * Note: + * 1. all parameters in nanosecond (ns) + * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits + * in pxa27x and pxa3xx, initialize them to the same value or + * the larger one will be used + * 3. same to {rd,wr}_pulse_width + */ + unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ + unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ + unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ + unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ + unsigned cmd_inh_time; /* Command Inhibit time between two writes */ + unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ +}; + +struct pxafb_mach_info { + struct pxafb_mode_info *modes; + unsigned int num_modes; + + unsigned int lcd_conn; + + u_int fixed_modes:1, + cmap_inverse:1, + cmap_static:1, + unused:29; + + /* The following should be defined in LCCR0 + * LCCR0_Act or LCCR0_Pas Active or Passive + * LCCR0_Sngl or LCCR0_Dual Single/Dual panel + * LCCR0_Mono or LCCR0_Color Mono/Color + * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) + * LCCR0_DMADel(Tcpu) (optional) DMA request delay + * + * The following should not be defined in LCCR0: + * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM + * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB + */ + u_int lccr0; + /* The following should be defined in LCCR3 + * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity + * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type + * LCCR3_Acb(X) AB Bias pin frequency + * LCCR3_DPC (optional) Double Pixel Clock mode (untested) + * + * The following should not be defined in LCCR3 + * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp + */ + u_int lccr3; + /* The following should be defined in LCCR4 + * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 + * + * All other bits in LCCR4 should be left alone. + */ + u_int lccr4; + void (*pxafb_backlight_power)(int); + void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); + void (*smart_update)(struct fb_info *); +}; +void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); +void set_pxa_fb_parent(struct device *parent_dev); +unsigned long pxafb_get_hsync_time(struct device *dev); + +extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); +extern int pxafb_smart_flush(struct fb_info *info); diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h new file mode 100644 index 00000000000..c689c4ea769 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h @@ -0,0 +1,180 @@ +#ifndef __ASM_ARCH_REGS_LCD_H +#define __ASM_ARCH_REGS_LCD_H + +#include <mach/bitfield.h> + +/* + * LCD Controller Registers and Bits Definitions + */ +#define LCCR0 (0x000) /* LCD Controller Control Register 0 */ +#define LCCR1 (0x004) /* LCD Controller Control Register 1 */ +#define LCCR2 (0x008) /* LCD Controller Control Register 2 */ +#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */ +#define LCCR4 (0x010) /* LCD Controller Control Register 4 */ +#define LCCR5 (0x014) /* LCD Controller Control Register 5 */ +#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */ +#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */ +#define LCSR (0x038) /* LCD Controller Status Register */ +#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */ +#define TMEDRGBR (0x040) /* TMED RGB Seed Register */ +#define TMEDCR (0x044) /* TMED Control Register */ + +#define CMDCR (0x100) /* Command Control Register */ +#define PRSR (0x104) /* Panel Read Status Register */ + +#define LCCR3_1BPP (0 << 24) +#define LCCR3_2BPP (1 << 24) +#define LCCR3_4BPP (2 << 24) +#define LCCR3_8BPP (3 << 24) +#define LCCR3_16BPP (4 << 24) +#define LCCR3_18BPP (5 << 24) +#define LCCR3_18BPP_P (6 << 24) +#define LCCR3_19BPP (7 << 24) +#define LCCR3_19BPP_P (1 << 29) +#define LCCR3_24BPP ((1 << 29) | (1 << 24)) +#define LCCR3_25BPP ((1 << 29) | (2 << 24)) + +#define LCCR3_PDFOR_0 (0 << 30) +#define LCCR3_PDFOR_1 (1 << 30) +#define LCCR3_PDFOR_2 (2 << 30) +#define LCCR3_PDFOR_3 (3 << 30) + +#define LCCR4_PAL_FOR_0 (0 << 15) +#define LCCR4_PAL_FOR_1 (1 << 15) +#define LCCR4_PAL_FOR_2 (2 << 15) +#define LCCR4_PAL_FOR_MASK (3 << 15) + +#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */ +#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */ +#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */ +#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */ +#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */ +#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */ +#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */ +#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */ +#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */ +#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */ +#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */ + +#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ +#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ +#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ +#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ +#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */ +#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ +#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ + +#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ +#define LCCR0_SFM (1 << 4) /* Start of frame mask */ +#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ +#define LCCR0_EFM (1 << 6) /* End of Frame mask */ +#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ +#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ +#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ +#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */ +#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */ +#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */ +#define LCCR0_DIS (1 << 10) /* LCD Disable */ +#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ +#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ +#define LCCR0_PDD_S 12 +#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ +#define LCCR0_LCDT (1 << 22) /* LCD panel type */ +#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ +#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ +#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ +#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ + +#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ +#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL)) + +#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ +#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW)) + +#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */ +#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW)) + +#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ +#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW)) + +#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ +#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP)) + +#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */ +#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW)) + +#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ +#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW)) + +#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ +#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW)) + +#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ +#define LCCR3_API_S 16 +#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ +#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ +#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ +#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ +#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ + +#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */ +#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ +#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ + +#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ +#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ +#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD))) + +#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ +#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP))) + +#define LCCR3_ACB Fld (8, 8) /* AC Bias */ +#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB))) + +#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */ +#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */ + +#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */ +#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */ + +#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */ +#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */ +#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */ +#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */ + +#define LCSR_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR_SOF (1 << 1) /* Start of frame */ +#define LCSR_BER (1 << 2) /* Bus error */ +#define LCSR_ABC (1 << 3) /* AC Bias count */ +#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR_OU (1 << 6) /* output FIFO underrun */ +#define LCSR_QD (1 << 7) /* quick disable */ +#define LCSR_EOF (1 << 8) /* end of frame */ +#define LCSR_BS (1 << 9) /* branch status */ +#define LCSR_SINT (1 << 10) /* subsequent interrupt */ +#define LCSR_RD_ST (1 << 11) /* read status */ +#define LCSR_CMD_INT (1 << 12) /* command interrupt */ + +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ + +/* smartpanel related */ +#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */ +#define PRSR_A0 (1 << 8) /* Read Data Source */ +#define PRSR_ST_OK (1 << 9) /* Status OK */ +#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */ + +#define SMART_CMD_A0 (0x1 << 8) +#define SMART_CMD_READ_STATUS_REG (0x0 << 9) +#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0) +#define SMART_CMD_WRITE_COMMAND (0x1 << 9) +#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0) +#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0) +#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9) +#define SMART_CMD_NOOP (0x4 << 9) +#define SMART_CMD_INTERRUPT (0x5 << 9) + +#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff)) +#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff)) +#endif /* __ASM_ARCH_REGS_LCD_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h new file mode 100644 index 00000000000..3c04cde2cf1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -0,0 +1,127 @@ +#ifndef __ASM_ARCH_REGS_SSP_H +#define __ASM_ARCH_REGS_SSP_H + +/* + * SSP Serial Port Registers + * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. + * PXA255, PXA26x and PXA27x have extra ports, registers and bits. + */ + +#define SSCR0 (0x00) /* SSP Control Register 0 */ +#define SSCR1 (0x04) /* SSP Control Register 1 */ +#define SSSR (0x08) /* SSP Status Register */ +#define SSITR (0x0C) /* SSP Interrupt Test Register */ +#define SSDR (0x10) /* SSP Data Write/Data Read Register */ + +#define SSTO (0x28) /* SSP Time Out Register */ +#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ +#define SSTSA (0x30) /* SSP Tx Timeslot Active */ +#define SSRSA (0x34) /* SSP Rx Timeslot Active */ +#define SSTSS (0x38) /* SSP Timeslot Status */ +#define SSACD (0x3C) /* SSP Audio Clock Divider */ + +#if defined(CONFIG_PXA3xx) +#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ +#endif + +/* Common PXA2xx bits first */ +#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ +#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ +#define SSCR0_National (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ + +#if defined(CONFIG_PXA25x) +#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ + +#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ +#define SSCR0_EDSS (1 << 20) /* Extended data size select */ +#define SSCR0_NCS (1 << 21) /* Network clock select */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ +#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ +#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ +#endif + +#if defined(CONFIG_PXA3xx) +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ +#endif + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ + +#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ +#define SSCR0_NCS (1 << 21) /* Network Clock Select */ +#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ + +/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ +#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ +#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ +#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ +#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ +#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ +#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ +#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ +#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ +#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ +#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ +#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ +#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ +#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ +#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ +#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ +#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ +#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ + +#define SSSR_BCE (1 << 23) /* Bit Count Error */ +#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ +#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ +#define SSSR_EOC (1 << 20) /* End Of Chain */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ +#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ + +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ + +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ +#if defined(CONFIG_PXA3xx) +#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ +#endif + + +#endif /* __ASM_ARCH_REGS_SSP_H */ diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h new file mode 100644 index 00000000000..9489a48871a --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARCH_RESET_H +#define __ASM_ARCH_RESET_H + +#define RESET_STATUS_HARDWARE (1 << 0) /* Hardware Reset */ +#define RESET_STATUS_WATCHDOG (1 << 1) /* Watchdog Reset */ +#define RESET_STATUS_LOWPOWER (1 << 2) /* Low Power/Sleep Exit */ +#define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ +#define RESET_STATUS_ALL (0xf) + +extern unsigned int reset_status; +extern void clear_reset_status(unsigned int mask); + +/* + * register GPIO as reset generator + */ +extern int init_gpio_reset(int gpio); + +#endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h new file mode 100644 index 00000000000..3b1d4a72d4d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/sharpsl.h @@ -0,0 +1,34 @@ +/* + * SharpSL SSP Driver + */ + +unsigned long corgi_ssp_ads7846_putget(unsigned long); +unsigned long corgi_ssp_ads7846_get(void); +void corgi_ssp_ads7846_put(unsigned long data); +void corgi_ssp_ads7846_lock(void); +void corgi_ssp_ads7846_unlock(void); +void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); +void corgi_ssp_blduty_set(int duty); +int corgi_ssp_max1111_get(unsigned long data); + +/* + * SharpSL Touchscreen Driver + */ + +struct corgits_machinfo { + unsigned long (*get_hsync_invperiod)(void); + void (*put_hsync)(void); + void (*wait_hsync)(void); +}; + + +/* + * SharpSL Backlight + */ +extern void corgibl_limit_intensity(int limit); + + +/* + * SharpSL Battery/PM Driver + */ +extern void sharpsl_battery_kick(void); diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h new file mode 100644 index 00000000000..bd14365f7ed --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -0,0 +1,158 @@ +/* + * Hardware specific definitions for SL-Cx000 series of PDAs + * + * Copyright (c) 2005 Alexander Wykes + * Copyright (c) 2005 Richard Purdie + * + * Based on Sharp's 2.4 kernel patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASM_ARCH_SPITZ_H +#define __ASM_ARCH_SPITZ_H 1 +#endif + +#include <linux/fb.h> + +/* Spitz/Akita GPIOs */ + +#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ +#define SPITZ_GPIO_RESET (1) +#define SPITZ_GPIO_nSD_DETECT (9) +#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */ +#define SPITZ_GPIO_AK_INT (13) /* Remote Control */ +#define SPITZ_GPIO_ADS7846_CS (14) +#define SPITZ_GPIO_SYNC (16) +#define SPITZ_GPIO_MAX1111_CS (20) +#define SPITZ_GPIO_FATAL_BAT (21) +#define SPITZ_GPIO_HSYNC (22) +#define SPITZ_GPIO_nSD_CLK (32) +#define SPITZ_GPIO_USB_DEVICE (35) +#define SPITZ_GPIO_USB_HOST (37) +#define SPITZ_GPIO_USB_CONNECT (41) +#define SPITZ_GPIO_LCDCON_CS (53) +#define SPITZ_GPIO_nPCE (54) +#define SPITZ_GPIO_nSD_WP (81) +#define SPITZ_GPIO_ON_RESET (89) +#define SPITZ_GPIO_BAT_COVER (90) +#define SPITZ_GPIO_CF_CD (94) +#define SPITZ_GPIO_ON_KEY (95) +#define SPITZ_GPIO_SWA (97) +#define SPITZ_GPIO_SWB (96) +#define SPITZ_GPIO_CHRG_FULL (101) +#define SPITZ_GPIO_CO (101) +#define SPITZ_GPIO_CF_IRQ (105) +#define SPITZ_GPIO_AC_IN (115) +#define SPITZ_GPIO_HP_IN (116) + +/* Spitz Only GPIOs */ + +#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ +#define SPITZ_GPIO_CF2_CD (93) + + +/* Spitz/Akita Keyboard Definitions */ + +#define SPITZ_KEY_STROBE_NUM (11) +#define SPITZ_KEY_SENSE_NUM (7) +#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 +#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 +#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 +#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 +#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 +#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 +#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 +#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 + +#define SPITZ_GPIO_KEY_STROBE0 88 +#define SPITZ_GPIO_KEY_STROBE1 23 +#define SPITZ_GPIO_KEY_STROBE2 24 +#define SPITZ_GPIO_KEY_STROBE3 25 +#define SPITZ_GPIO_KEY_STROBE4 26 +#define SPITZ_GPIO_KEY_STROBE5 27 +#define SPITZ_GPIO_KEY_STROBE6 52 +#define SPITZ_GPIO_KEY_STROBE7 103 +#define SPITZ_GPIO_KEY_STROBE8 107 +#define SPITZ_GPIO_KEY_STROBE9 108 +#define SPITZ_GPIO_KEY_STROBE10 114 + +#define SPITZ_GPIO_KEY_SENSE0 12 +#define SPITZ_GPIO_KEY_SENSE1 17 +#define SPITZ_GPIO_KEY_SENSE2 91 +#define SPITZ_GPIO_KEY_SENSE3 34 +#define SPITZ_GPIO_KEY_SENSE4 36 +#define SPITZ_GPIO_KEY_SENSE5 38 +#define SPITZ_GPIO_KEY_SENSE6 39 + + +/* Spitz Scoop Device (No. 1) GPIOs */ +/* Suspend States in comments */ +#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */ +#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */ +#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */ +#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */ +#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */ +#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */ +#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */ +#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ +#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ + +#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ + SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ + SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) +#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) +#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) +#define SPITZ_SCP_SUS_SET 0 + +/* Spitz Scoop Device (No. 2) GPIOs */ +/* Suspend States in comments */ +#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ +#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */ +#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ +#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ +#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ +#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ +#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */ +#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ +#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ + +#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ + SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ + SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) + +#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) +#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ + SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) +#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) + + +/* Spitz IRQ Definitions */ + +#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) +#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) +#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) +#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) +#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) +#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) +#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) +#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) +#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) +#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) +#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) +#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) +#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) +#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) +#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) +#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) +#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) + +/* + * Shared data structures + */ +extern struct platform_device spitzscoop_device; +extern struct platform_device spitzscoop2_device; +extern struct platform_device spitzssp_device; +extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h new file mode 100644 index 00000000000..a012882c9ee --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/ssp.h @@ -0,0 +1,83 @@ +/* + * ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver supports the following PXA CPU/SSP ports:- + * + * PXA250 SSP + * PXA255 SSP, NSSP + * PXA26x SSP, NSSP, ASSP + * PXA27x SSP1, SSP2, SSP3 + * PXA3xx SSP1, SSP2, SSP3, SSP4 + */ + +#ifndef __ASM_ARCH_SSP_H +#define __ASM_ARCH_SSP_H + +#include <linux/list.h> + +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, +}; + +struct ssp_device { + struct platform_device *pdev; + struct list_head node; + + struct clk *clk; + void __iomem *mmio_base; + unsigned long phys_base; + + const char *label; + int port_id; + int type; + int use_count; + int irq; + int drcmr_rx; + int drcmr_tx; +}; + +/* + * SSP initialisation flags + */ +#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */ + +struct ssp_state { + u32 cr0; + u32 cr1; + u32 to; + u32 psp; +}; + +struct ssp_dev { + struct ssp_device *ssp; + u32 port; + u32 mode; + u32 flags; + u32 psp_flags; + u32 speed; + int irq; +}; + +int ssp_write_word(struct ssp_dev *dev, u32 data); +int ssp_read_word(struct ssp_dev *dev, u32 *data); +int ssp_flush(struct ssp_dev *dev); +void ssp_enable(struct ssp_dev *dev); +void ssp_disable(struct ssp_dev *dev); +void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); +void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); +int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); +int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); +void ssp_exit(struct ssp_dev *dev); + +struct ssp_device *ssp_request(int port, const char *label); +void ssp_free(struct ssp_device *); +#endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h new file mode 100644 index 00000000000..0f381e69299 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/system.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-pxa/include/mach/system.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/proc-fns.h> +#include "hardware.h" +#include "pxa2xx-regs.h" +#include "pxa-regs.h" + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + + +void arch_reset(char mode); diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h new file mode 100644 index 00000000000..b05fc6683c4 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/timex.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-pxa/include/mach/timex.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#if defined(CONFIG_PXA25x) +/* PXA250/210 timer base */ +#define CLOCK_TICK_RATE 3686400 +#elif defined(CONFIG_PXA27x) +/* PXA27x timer base */ +#ifdef CONFIG_MACH_MAINSTONE +#define CLOCK_TICK_RATE 3249600 +#else +#define CLOCK_TICK_RATE 3250000 +#endif +#else +#define CLOCK_TICK_RATE 3250000 +#endif diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h new file mode 100644 index 00000000000..a72803f0461 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -0,0 +1,198 @@ +/* + * Hardware specific definitions for Sharp SL-C6000x series of PDAs + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on Sharp's 2.4 kernel patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _ASM_ARCH_TOSA_H_ +#define _ASM_ARCH_TOSA_H_ 1 + +/* TOSA Chip selects */ +#define TOSA_LCDC_PHYS PXA_CS4_PHYS +/* Internel Scoop */ +#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000) +/* Jacket Scoop */ +#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) + +/* + * SCOOP2 internal GPIOs + */ +#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO +#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 +#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) +#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) +#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) +#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) +#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 +#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6) +#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7) +#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ + TOSA_SCOOP_AUD_PWR_ON) + +/* + * SCOOP2 jacket GPIOs + */ +#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) +#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) +#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) +#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) +#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4) +#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) +#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 +#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) +#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) + +/* + * TC6393XB GPIOs + */ +#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) +#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) + +#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) +#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) +#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) +#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) +#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) +#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) +#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) +#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) +#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) +#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) +#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) +#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) + +/* + * Timing Generator + */ +#define TG_PNLCTL 0x00 +#define TG_TPOSCTL 0x01 +#define TG_DUTYCTL 0x02 +#define TG_GPOSR 0x03 +#define TG_GPODR1 0x04 +#define TG_GPODR2 0x05 +#define TG_PINICTL 0x06 +#define TG_HPOSCTL 0x07 + +/* + * PXA GPIOs + */ +#define TOSA_GPIO_POWERON (0) +#define TOSA_GPIO_RESET (1) +#define TOSA_GPIO_AC_IN (2) +#define TOSA_GPIO_RECORD_BTN (3) +#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */ +#define TOSA_GPIO_USB_IN (5) +#define TOSA_GPIO_JACKET_DETECT (7) +#define TOSA_GPIO_nSD_DETECT (9) +#define TOSA_GPIO_nSD_INT (10) +#define TOSA_GPIO_TC6393XB_CLK (11) +#define TOSA_GPIO_BAT1_CRG (12) +#define TOSA_GPIO_CF_CD (13) +#define TOSA_GPIO_BAT0_CRG (14) +#define TOSA_GPIO_TC6393XB_INT (15) +#define TOSA_GPIO_BAT0_LOW (17) +#define TOSA_GPIO_TC6393XB_RDY (18) +#define TOSA_GPIO_ON_RESET (19) +#define TOSA_GPIO_EAR_IN (20) +#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ +#define TOSA_GPIO_ON_KEY (22) +#define TOSA_GPIO_VGA_LINE (27) +#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ +#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ +#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_IRDA_TX (47) +#define TOSA_GPIO_TG_SPI_SCLK (81) +#define TOSA_GPIO_TG_SPI_CS (82) +#define TOSA_GPIO_TG_SPI_MOSI (83) +#define TOSA_GPIO_BAT1_LOW (84) + +#define TOSA_GPIO_HP_IN GPIO_EAR_IN + +#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW + +#define TOSA_KEY_STROBE_NUM (11) +#define TOSA_KEY_SENSE_NUM (7) + +#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000) +#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f) +#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0) +#define TOSA_GPIO_ALL_SENSE_RSHIFT (5) +#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a)) +#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a)) +#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000) +#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff) +#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00) +#define TOSA_GPIO_KEY_SENSE(a) (69+(a)) +#define TOSA_GPIO_KEY_STROBE(a) (58+(a)) + +/* + * Interrupts + */ +#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) +#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) +#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) +#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) +#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) +#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) +#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) +#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) +#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) +#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) +#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) +#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) +#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) +#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) +#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) +#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) +#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) +#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) +#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) +#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) +#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) +#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) + +#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) + +#define TOSA_KEY_SYNC KEY_102ND /* ??? */ + +#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES +#define TOSA_KEY_RECORD KEY_YEN +#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA +#define TOSA_KEY_CANCEL KEY_ESC +#define TOSA_KEY_CENTER KEY_HIRAGANA +#define TOSA_KEY_OK KEY_HENKAN +#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA +#define TOSA_KEY_HOMEPAGE KEY_HANGEUL +#define TOSA_KEY_LIGHT KEY_MUHENKAN +#define TOSA_KEY_MENU KEY_HANJA +#define TOSA_KEY_FN KEY_RIGHTALT +#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU +#else +#define TOSA_KEY_RECORD KEY_RECORD +#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK +#define TOSA_KEY_CANCEL KEY_CANCEL +#define TOSA_KEY_CENTER KEY_SELECT /* ??? */ +#define TOSA_KEY_OK KEY_OK +#define TOSA_KEY_CALENDAR KEY_CALENDAR +#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE +#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE +#define TOSA_KEY_MENU KEY_MENU +#define TOSA_KEY_FN KEY_FN +#define TOSA_KEY_MAIL KEY_MAIL +#endif + +#endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h new file mode 100644 index 00000000000..efc3c3d3b75 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/tosa_bt.h @@ -0,0 +1,22 @@ +/* + * Tosa bluetooth built-in chip control. + * + * Later it may be shared with some other platforms. + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef TOSA_BT_H +#define TOSA_BT_H + +struct tosa_bt_data { + int gpio_pwr; + int gpio_reset; +}; + +#endif + diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h new file mode 100644 index 00000000000..641d0ec110b --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -0,0 +1,106 @@ +/************************************************************************ + * Include file for TRIZEPS4 SoM and ConXS eval-board + * Copyright (c) Jürgen Schindele + * 2006 + ************************************************************************/ + +/* + * Includes/Defines + */ +#ifndef _TRIPEPS4_H_ +#define _TRIPEPS4_H_ + +/* physical memory regions */ +#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ +#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */ +#define TRIZEPS4_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ +#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */ +#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */ + +#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */ +#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */ +#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/ +#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/ +#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/ + +/* virtual memory regions */ +#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */ + +#define TRIZEPS4_PIC_VIRT 0xF0100000 /* not used */ +#define TRIZEPS4_CFSR_VIRT 0xF0100000 +#define TRIZEPS4_BOCR_VIRT 0xF0200000 +#define TRIZEPS4_DICR_VIRT 0xF0300000 +#define TRIZEPS4_IRCR_VIRT 0xF0400000 +#define TRIZEPS4_UPSR_VIRT 0xF0500000 + +/* size of flash */ +#define TRIZEPS4_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ + +/* Ethernet Controller Davicom DM9000 */ +#define GPIO_DM9000 101 +#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000) + +/* UCB1400 audio / TS-controller */ +#define GPIO_UCB1400 1 +#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400) + +/* PCMCIA socket Compact Flash */ +#define GPIO_PCD 11 /* PCMCIA Card Detect */ +#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD) +#define GPIO_PRDY 13 /* READY / nINT */ +#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY) + +/* MMC socket */ +#define GPIO_MMC_DET 12 +#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) + +/* LEDS using tx2 / rx2 */ +#define GPIO_SYS_BUSY_LED 46 +#define GPIO_HEARTBEAT_LED 47 + +/* Off-module PIC on ConXS board */ +#define GPIO_PIC 0 +#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) + +#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) +#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) + +#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) +#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) + +#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) +#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) + +#ifndef __ASSEMBLY__ +#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000))) +#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000))) +#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000))) +#else +#define ConXS_CFSR CFSR_P2V(0x0C000000) +#define ConXS_BCR BCR_P2V(0x0E000000) +#define ConXS_DCR DCR_P2V(0x0F800000) +#endif + +#define ConXS_CFSR_BVD_MASK 0x0003 +#define ConXS_CFSR_BVD1 (1 << 0) +#define ConXS_CFSR_BVD2 (1 << 1) +#define ConXS_CFSR_VS_MASK 0x000C +#define ConXS_CFSR_VS1 (1 << 2) +#define ConXS_CFSR_VS2 (1 << 3) +#define ConXS_CFSR_VS_5V (0x3 << 2) +#define ConXS_CFSR_VS_3V3 0x0 + +#define ConXS_BCR_S0_POW_EN0 (1 << 0) +#define ConXS_BCR_S0_POW_EN1 (1 << 1) +#define ConXS_BCR_L_DISP (1 << 4) +#define ConXS_BCR_CF_BUF_EN (1 << 5) +#define ConXS_BCR_CF_RESET (1 << 7) +#define ConXS_BCR_S0_VCC_3V3 0x1 +#define ConXS_BCR_S0_VCC_5V0 0x2 +#define ConXS_BCR_S0_VPP_12V 0x4 +#define ConXS_BCR_S0_VPP_3V3 0x8 + +#define ConXS_IRCR_MODE (1 << 0) +#define ConXS_IRCR_SD (1 << 1) + +#endif /* _TRIPEPS4_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h new file mode 100644 index 00000000000..2f82332e81a --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/udc.h @@ -0,0 +1,8 @@ +/* + * arch/arm/mach-pxa/include/mach/udc.h + * + */ +#include <asm/mach/udc_pxa2xx.h> + +extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); + diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h new file mode 100644 index 00000000000..21e3e890af9 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -0,0 +1,45 @@ +/* + * arch/arm/mach-pxa/include/mach/uncompress.h + * + * Author: Nicolas Pitre + * Copyright: (C) 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/serial_reg.h> +#include <mach/pxa-regs.h> +#include <asm/mach-types.h> + +#define __REG(x) ((volatile unsigned long *)x) + +static volatile unsigned long *UART = FFUART; + +static inline void putc(char c) +{ + if (!(UART[UART_IER] & IER_UUE)) + return; + while (!(UART[UART_LSR] & LSR_TDRQ)) + barrier(); + UART[UART_TX] = c; +} + +/* + * This does not append a newline + */ +static inline void flush(void) +{ +} + +static inline void arch_decomp_setup(void) +{ + if (machine_is_littleton()) + UART = STUART; +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h new file mode 100644 index 00000000000..e90c5eeb81d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/vmalloc.h @@ -0,0 +1,11 @@ +/* + * arch/arm/mach-pxa/include/mach/vmalloc.h + * + * Author: Nicolas Pitre + * Copyright: (C) 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define VMALLOC_END (0xe8000000) diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h new file mode 100644 index 00000000000..0d35ca04731 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -0,0 +1,47 @@ +#ifndef __ASM_ARCH_ZYLONITE_H +#define __ASM_ARCH_ZYLONITE_H + +#define ZYLONITE_ETH_PHYS 0x14000000 + +#define EXT_GPIO(x) (128 + (x)) + +/* the following variables are processor specific and initialized + * by the corresponding zylonite_pxa3xx_init() + */ +struct platform_mmc_slot { + int gpio_cd; + int gpio_wp; +}; + +extern struct platform_mmc_slot zylonite_mmc_slot[]; + +extern int gpio_eth_irq; +extern int gpio_debug_led1; +extern int gpio_debug_led2; + +extern int wm9713_irq; + +extern int lcd_id; +extern int lcd_orientation; + +#ifdef CONFIG_CPU_PXA300 +extern void zylonite_pxa300_init(void); +#else +static inline void zylonite_pxa300_init(void) +{ + if (cpu_is_pxa300() || cpu_is_pxa310()) + panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__); +} +#endif + +#ifdef CONFIG_CPU_PXA320 +extern void zylonite_pxa320_init(void); +#else +static inline void zylonite_pxa320_init(void) +{ + if (cpu_is_pxa320()) + panic("%s: PXA320 not supported\n", __FUNCTION__); +} +#endif + +#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index fbff557bb22..5e95c5372fe 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -17,10 +17,10 @@ #include <linux/interrupt.h> #include <linux/sysdev.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <asm/arch/pxa-regs.h> +#include <mach/pxa-regs.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c index 38aa9270540..18b20d46941 100644 --- a/arch/arm/mach-pxa/leds-idp.c +++ b/arch/arm/mach-pxa/leds-idp.c @@ -14,12 +14,12 @@ #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/idp.h> +#include <mach/pxa-regs.h> +#include <mach/idp.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c index afbc6698e27..1a258029c33 100644 --- a/arch/arm/mach-pxa/leds-lubbock.c +++ b/arch/arm/mach-pxa/leds-lubbock.c @@ -13,11 +13,11 @@ #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/lubbock.h> +#include <mach/pxa-regs.h> +#include <mach/lubbock.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c index 065293eb0d8..95e06b84963 100644 --- a/arch/arm/mach-pxa/leds-mainstone.c +++ b/arch/arm/mach-pxa/leds-mainstone.c @@ -12,12 +12,12 @@ #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/mainstone.h> +#include <mach/pxa-regs.h> +#include <mach/mainstone.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c index 21880daabaf..3bc29007df3 100644 --- a/arch/arm/mach-pxa/leds-trizeps4.c +++ b/arch/arm/mach-pxa/leds-trizeps4.c @@ -12,14 +12,14 @@ #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/system.h> #include <asm/types.h> #include <asm/leds.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/trizeps4.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/trizeps4.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index dd759d03a9f..58f3402a037 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -26,21 +26,21 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/mfp-pxa300.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/ssp.h> -#include <asm/arch/pxa27x_keypad.h> -#include <asm/arch/pxa3xx_nand.h> -#include <asm/arch/littleton.h> +#include <mach/pxa-regs.h> +#include <mach/mfp-pxa300.h> +#include <mach/gpio.h> +#include <mach/pxafb.h> +#include <mach/ssp.h> +#include <mach/pxa27x_keypad.h> +#include <mach/pxa3xx_nand.h> +#include <mach/littleton.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 8d1ab54e7b2..b7038948d1d 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -29,7 +29,7 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/sizes.h> @@ -38,15 +38,15 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/lpd270.h> -#include <asm/arch/audio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/mmc.h> -#include <asm/arch/irda.h> -#include <asm/arch/ohci.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/lpd270.h> +#include <mach/audio.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <mach/irda.h> +#include <mach/ohci.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index af7375bb46a..bb9e09208b9 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -25,12 +25,12 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <asm/arch/pxa2xx_spi.h> +#include <mach/pxa2xx_spi.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/sizes.h> @@ -41,15 +41,15 @@ #include <asm/hardware/sa1111.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa25x.h> -#include <asm/arch/audio.h> -#include <asm/arch/lubbock.h> -#include <asm/arch/udc.h> -#include <asm/arch/irda.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/mmc.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> +#include <mach/audio.h> +#include <mach/lubbock.h> +#include <mach/udc.h> +#include <mach/irda.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> #include "generic.h" #include "devices.h" @@ -224,7 +224,7 @@ static struct platform_device sa1111_device = { * for the temperature sensors. */ static struct pxa2xx_spi_master pxa_ssp_master_info = { - .num_chipselect = 0, + .num_chipselect = 1, }; static int lubbock_ads7846_pendown_state(void) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index c9d274f0048..143f28adaf9 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -26,18 +26,18 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/arch/magician.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/i2c.h> -#include <asm/arch/mmc.h> -#include <asm/arch/irda.h> -#include <asm/arch/ohci.h> +#include <mach/magician.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxafb.h> +#include <mach/i2c.h> +#include <mach/mmc.h> +#include <mach/irda.h> +#include <mach/ohci.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index c8e38b5ff1c..d44af761564 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -32,7 +32,7 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/sizes.h> @@ -41,17 +41,17 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/mainstone.h> -#include <asm/arch/audio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/i2c.h> -#include <asm/arch/mmc.h> -#include <asm/arch/irda.h> -#include <asm/arch/ohci.h> -#include <asm/arch/pxa27x_keypad.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> +#include <mach/mainstone.h> +#include <mach/audio.h> +#include <mach/pxafb.h> +#include <mach/i2c.h> +#include <mach/mmc.h> +#include <mach/irda.h> +#include <mach/ohci.h> +#include <mach/pxa27x_keypad.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index fd4545eab80..925575f10ac 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -18,10 +18,10 @@ #include <linux/init.h> #include <linux/sysdev.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa2xx.h> +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa2xx.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 3a5b0fcbaf1..eb197a6e8e9 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -19,10 +19,10 @@ #include <linux/io.h> #include <linux/sysdev.h> -#include <asm/hardware.h> -#include <asm/arch/mfp.h> -#include <asm/arch/mfp-pxa3xx.h> -#include <asm/arch/pxa3xx-regs.h> +#include <mach/hardware.h> +#include <mach/mfp.h> +#include <mach/mfp-pxa3xx.h> +#include <mach/pxa3xx-regs.h> /* mfp_spin_lock is used to ensure that MFP register configuration * (most likely a read-modify-write operation) is atomic, and that diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 408657a24f8..fe924a23deb 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -30,15 +30,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/arch/audio.h> -#include <asm/arch/palmtx.h> -#include <asm/arch/mmc.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/irda.h> -#include <asm/arch/pxa27x_keypad.h> -#include <asm/arch/udc.h> +#include <mach/audio.h> +#include <mach/palmtx.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/pxa-regs.h> +#include <mach/mfp-pxa27x.h> +#include <mach/irda.h> +#include <mach/pxa27x_keypad.h> +#include <mach/udc.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 377f3be8ce5..730b9f6ede1 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -29,12 +29,12 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx_spi.h> -#include <asm/arch/pcm027.h> +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx_spi.h> +#include <mach/pcm027.h> #include "generic.h" /* diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 30023b00e47..420c9b3813f 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -22,23 +22,22 @@ #include <linux/irq.h> #include <linux/platform_device.h> -#include <linux/ide.h> #include <linux/i2c.h> #include <linux/pwm_backlight.h> #include <media/soc_camera.h> #include <asm/gpio.h> -#include <asm/arch/i2c.h> -#include <asm/arch/camera.h> +#include <mach/i2c.h> +#include <mach/camera.h> #include <asm/mach/map.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/audio.h> -#include <asm/arch/mmc.h> -#include <asm/arch/ohci.h> -#include <asm/arch/pcm990_baseboard.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/mfp-pxa27x.h> +#include <mach/pxa-regs.h> +#include <mach/audio.h> +#include <mach/mmc.h> +#include <mach/ohci.h> +#include <mach/pcm990_baseboard.h> +#include <mach/pxafb.h> +#include <mach/mfp-pxa27x.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 7d4debbdcca..1b539e67557 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -16,12 +16,12 @@ #include <linux/errno.h> #include <linux/time.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/memory.h> #include <asm/system.h> -#include <asm/arch/pm.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/lubbock.h> +#include <mach/pm.h> +#include <mach/pxa-regs.h> +#include <mach/lubbock.h> #include <asm/mach/time.h> struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 39612cfa0b4..055ec63d768 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -21,7 +21,7 @@ #include <linux/pm.h> #include <linux/delay.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/setup.h> @@ -31,16 +31,16 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/mmc.h> -#include <asm/arch/udc.h> -#include <asm/arch/irda.h> -#include <asm/arch/poodle.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/sharpsl.h> -#include <asm/arch/ssp.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/mmc.h> +#include <mach/udc.h> +#include <mach/irda.h> +#include <mach/poodle.h> +#include <mach/pxafb.h> +#include <mach/sharpsl.h> +#include <mach/ssp.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c index ce28cd9fed1..316cd986da5 100644 --- a/arch/arm/mach-pxa/pwm.c +++ b/arch/arm/mach-pxa/pwm.c @@ -20,7 +20,7 @@ #include <linux/pwm.h> #include <asm/div64.h> -#include <asm/arch/pxa-regs.h> +#include <mach/pxa-regs.h> /* PWM registers and bits definitions */ #define PWMCR (0x00) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 49a7a296ff3..9e5d8a8c642 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -23,14 +23,14 @@ #include <linux/suspend.h> #include <linux/sysdev.h> -#include <asm/hardware.h> -#include <asm/arch/irqs.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa25x.h> -#include <asm/arch/reset.h> -#include <asm/arch/pm.h> -#include <asm/arch/dma.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> +#include <mach/reset.h> +#include <mach/pm.h> +#include <mach/dma.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index a8c12347a5a..f9f6a9c31f4 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -18,17 +18,17 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> -#include <asm/arch/irqs.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa27x.h> -#include <asm/arch/reset.h> -#include <asm/arch/ohci.h> -#include <asm/arch/pm.h> -#include <asm/arch/dma.h> -#include <asm/arch/i2c.h> +#include <mach/irqs.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> +#include <mach/reset.h> +#include <mach/ohci.h> +#include <mach/pm.h> +#include <mach/dma.h> +#include <mach/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index d93d3e6a6e2..73d04d81c75 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -14,12 +14,12 @@ #include <linux/kernel.h> #include <linux/device.h> -#include <asm/hardware.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa2xx.h> -#include <asm/arch/mfp-pxa25x.h> -#include <asm/arch/reset.h> -#include <asm/arch/irda.h> +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa2xx.h> +#include <mach/mfp-pxa25x.h> +#include <mach/reset.h> +#include <mach/irda.h> void pxa2xx_clear_reset_status(unsigned int mask) { diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index da92e973388..494fc1f032d 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -17,9 +17,9 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <asm/hardware.h> -#include <asm/arch/pxa3xx-regs.h> -#include <asm/arch/mfp-pxa300.h> +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa300.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index c557c23a1ef..016eb18f01a 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -17,10 +17,10 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <asm/hardware.h> -#include <asm/arch/mfp.h> -#include <asm/arch/pxa3xx-regs.h> -#include <asm/arch/mfp-pxa320.h> +#include <mach/hardware.h> +#include <mach/mfp.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa320.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 3d36c790f5c..03cbc38103e 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -22,13 +22,13 @@ #include <linux/io.h> #include <linux/sysdev.h> -#include <asm/hardware.h> -#include <asm/arch/pxa3xx-regs.h> -#include <asm/arch/reset.h> -#include <asm/arch/ohci.h> -#include <asm/arch/pm.h> -#include <asm/arch/dma.h> -#include <asm/arch/ssp.h> +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/reset.h> +#include <mach/ohci.h> +#include <mach/pm.h> +#include <mach/dma.h> +#include <mach/ssp.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index 9503897d049..13e6bfdfff6 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -16,8 +16,8 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <asm/hardware.h> -#include <asm/arch/mfp-pxa930.h> +#include <mach/hardware.h> +#include <mach/mfp-pxa930.h> static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = { diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 56f60d923a9..9996c612c3d 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -10,8 +10,8 @@ #include <asm/io.h> #include <asm/proc-fns.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/reset.h> +#include <mach/pxa-regs.h> +#include <mach/reset.h> unsigned int reset_status; EXPORT_SYMBOL(reset_status); diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index d02bc6f8bb9..e7ea91ce7f0 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -21,9 +21,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware.h> -#include <asm/arch/pxa3xx-regs.h> -#include <asm/arch/mfp-pxa930.h> +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa930.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 23e9b928330..e804ae09370 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -22,12 +22,12 @@ #include <linux/platform_device.h> #include <linux/apm-emulation.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/arch/pm.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/sharpsl.h> +#include <mach/pm.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/sharpsl.h> #include "sharpsl.h" struct battery_thresh spitz_battery_levels_acin[] = { diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 784716eb7fc..a62c8375eb5 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -13,10 +13,10 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/hardware.h> +#include <mach/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> #define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 207fe3e6a3d..cd39005c98f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -26,7 +26,7 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/system.h> @@ -35,19 +35,19 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/pxa27x-udc.h> -#include <asm/arch/reset.h> -#include <asm/arch/irda.h> -#include <asm/arch/mmc.h> -#include <asm/arch/ohci.h> -#include <asm/arch/udc.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/akita.h> -#include <asm/arch/spitz.h> -#include <asm/arch/sharpsl.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/pxa27x-udc.h> +#include <mach/reset.h> +#include <mach/irda.h> +#include <mach/mmc.h> +#include <mach/ohci.h> +#include <mach/udc.h> +#include <mach/pxafb.h> +#include <mach/akita.h> +#include <mach/spitz.h> +#include <mach/sharpsl.h> #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 360354084ae..8a40505dfd2 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -20,14 +20,14 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/hardware/scoop.h> -#include <asm/arch/sharpsl.h> -#include <asm/arch/spitz.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> +#include <mach/sharpsl.h> +#include <mach/spitz.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 89f38683787..9bd93c5f28b 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -31,10 +31,10 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/arch/ssp.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/regs-ssp.h> +#include <mach/hardware.h> +#include <mach/ssp.h> +#include <mach/pxa-regs.h> +#include <mach/regs-ssp.h> #define TIMEOUT 100000 diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 40bb70eff3f..f3821cfda72 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -11,10 +11,10 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/hardware.h> +#include <mach/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> .text diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index ac283507e42..589d32b4fc4 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -21,9 +21,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware.h> -#include <asm/arch/pxa3xx-regs.h> -#include <asm/arch/mfp-pxa930.h> +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa930.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 7b7c0179795..67e18509d7b 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -22,7 +22,7 @@ #include <asm/cnt32_to_63.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <asm/arch/pxa-regs.h> +#include <mach/pxa-regs.h> #include <asm/mach-types.h> /* diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c index 7d8505466e5..fb0294bd431 100644 --- a/arch/arm/mach-pxa/tosa-bt.c +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -16,7 +16,7 @@ #include <linux/delay.h> #include <linux/rfkill.h> -#include <asm/arch/tosa_bt.h> +#include <mach/tosa_bt.h> static void tosa_bt_on(struct tosa_bt_data *data) { diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 4bd7d4f006e..5dab30eafdd 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -34,17 +34,17 @@ #include <asm/setup.h> #include <asm/mach-types.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/mfp-pxa25x.h> -#include <asm/arch/reset.h> -#include <asm/arch/irda.h> -#include <asm/arch/i2c.h> -#include <asm/arch/mmc.h> -#include <asm/arch/udc.h> -#include <asm/arch/tosa_bt.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> +#include <mach/reset.h> +#include <mach/irda.h> +#include <mach/i2c.h> +#include <mach/mmc.h> +#include <mach/udc.h> +#include <mach/tosa_bt.h> #include <asm/mach/arch.h> -#include <asm/arch/tosa.h> +#include <mach/tosa.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 12811b7aea0..3ed757e6bcc 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -31,7 +31,7 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/sizes.h> @@ -40,15 +40,15 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> -#include <asm/arch/trizeps4.h> -#include <asm/arch/audio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/mmc.h> -#include <asm/arch/irda.h> -#include <asm/arch/ohci.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/trizeps4.h> +#include <mach/audio.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <mach/irda.h> +#include <mach/ohci.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 8fca6d890b7..0cb65b5772f 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -23,14 +23,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware.h> -#include <asm/arch/audio.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/zylonite.h> -#include <asm/arch/mmc.h> -#include <asm/arch/pxa27x_keypad.h> -#include <asm/arch/pxa3xx_nand.h> +#include <mach/hardware.h> +#include <mach/audio.h> +#include <mach/gpio.h> +#include <mach/pxafb.h> +#include <mach/zylonite.h> +#include <mach/mmc.h> +#include <mach/pxa27x_keypad.h> +#include <mach/pxa3xx_nand.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index b28d46e081d..095f5c64823 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -20,9 +20,9 @@ #include <linux/i2c/pca953x.h> #include <asm/gpio.h> -#include <asm/arch/mfp-pxa300.h> -#include <asm/arch/i2c.h> -#include <asm/arch/zylonite.h> +#include <mach/mfp-pxa300.h> +#include <mach/i2c.h> +#include <mach/zylonite.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 2b7fba7a292..9879d7da2df 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -17,9 +17,9 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <asm/arch/gpio.h> -#include <asm/arch/mfp-pxa320.h> -#include <asm/arch/zylonite.h> +#include <mach/gpio.h> +#include <mach/mfp-pxa320.h> +#include <mach/zylonite.h> #include "generic.h" |