summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa')
-rw-r--r--arch/arm/mach-pxa/Kconfig51
-rw-r--r--arch/arm/mach-pxa/Makefile2
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.c27
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.h14
-rw-r--r--arch/arm/mach-pxa/cm-x270.c405
-rw-r--r--arch/arm/mach-pxa/em-x270.c373
-rw-r--r--arch/arm/mach-pxa/ezx.c220
-rw-r--r--arch/arm/mach-pxa/magician.c48
-rw-r--r--arch/arm/mach-pxa/palmtx.c416
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c74
-rw-r--r--arch/arm/mach-pxa/spitz.c1
-rw-r--r--arch/arm/mach-pxa/ssp.c2
-rw-r--r--arch/arm/mach-pxa/tosa.c4
13 files changed, 1376 insertions, 261 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index faa2c3f6c1a..1a7ceb8866f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -189,7 +189,6 @@ config MACH_ARMCORE
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- depends on ARCH_PXA
select PXA27x
select IWMMXT
@@ -199,6 +198,20 @@ config MACH_PCM027
select IWMMXT
select PXA_SSP
+config ARCH_PXA_PALM
+ bool "PXA based Palm PDAs"
+ select HAVE_PWM
+
+config MACH_PALMTX
+ bool "Palm T|X"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm T|X
+ handheld computer.
+
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
@@ -220,6 +233,42 @@ config PCM990_DISPLAY_NONE
endchoice
+config PXA_EZX
+ bool "Motorola EZX Platform"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
+
+config MACH_EZX_A780
+ bool "Motorola EZX A780"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E680
+ bool "Motorola EZX E680"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A1200
+ bool "Motorola EZX A1200"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A910
+ bool "Motorola EZX A910"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E6
+ bool "Motorola EZX E6"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E2
+ bool "Motorola EZX E2"
+ default y
+ depends on PXA_EZX
+
endmenu
config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4..0865236513c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
+obj-$(CONFIG_MACH_PALMTX)+= palmtx.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
@@ -46,6 +47,7 @@ endif
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
+obj-$(CONFIG_PXA_EZX) += ezx.o
# Support for blinky lights
led-y := leds.o
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 319c9ff3ab9..bcf0cde6ccc 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
*
* Bits taken from various places.
*
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
- pr_info("Adjusting zones for CM-x270\n");
+ pr_info("Adjusting zones for CM-X270\n");
/*
* Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
- GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+ GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
it8152_irq_demux(irq, desc);
}
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
- pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
- set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
- set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
- cmx270_it8152_irq_demux);
+ cmx270_it8152_irq_gpio = irq_gpio;
+
+ set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+
+ set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
}
#ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
Here comes the ugly part. The routing is baseboard specific,
- but defining a platform for each possible base of CM-x270 is
- unrealistic. Here we keep mapping for ATXBase and SB-x270.
+ but defining a platform for each possible base of CM-X270 is
+ unrealistic. Here we keep mapping for ATXBase and SB-X270.
*/
/* ATXBASE PCI slot */
if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a..48f532f4cb5 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
extern void __cmx270_pci_suspend(void);
extern void __cmx270_pci_resume(void);
#ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
#else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index b3c3fd72d04..402e807eae5 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-pxa/cm-x270.c
*
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
* published by the Free Software Foundation.
*/
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
#include <linux/platform_device.h>
-#include <linux/irq.h>
#include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
#include <video/mbxfb.h>
+#include <linux/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
#include <asm/hardware/it8152.h>
#include "generic.h"
#include "cm-x270-pci.h"
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE (0xe8000000)
+#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
+
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ (10)
+#define GPIO22_IT8152_IRQ (22)
+#define GPIO83_MMC_IRQ (83)
+#define GPIO95_GFXIRQ (95)
+
+#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER (105)
+
+static unsigned long cmx270_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MCI controller */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_SSP2_SFRM,
+ GPIO87_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+ GPIO49_nPWE,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
+ GPIO53_GPIO, /* PC card reset */
+
+ /* NAND controls */
+ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO89_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO10_GPIO, /* DM9000 interrupt */
+ GPIO83_GPIO, /* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
[0] = {
.start = DM9000_PHYS_BASE,
.end = DM9000_PHYS_BASE + 4,
@@ -60,35 +172,49 @@ static struct resource cmx270_dm9k_resource[] = {
[2] = {
.start = CMX270_ETHIRQ,
.end = CMX270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
.name = "dm9000",
.id = 0,
- .num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
- .resource = cmx270_dm9k_resource,
+ .num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
+ .resource = cmx270_dm9000_resource,
.dev = {
- .platform_data = &cmx270_dm9k_platdata,
+ .platform_data = &cmx270_dm9000_platdata,
}
};
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+ platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx270_ts_device = {
.name = "ucb1400_ts",
.id = -1,
};
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+ platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
[0] = {
.start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
}
};
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+ platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+ [0] = {
+ .name = "cm-x270:red",
+ .default_trigger = "nand-disk",
+ .gpio = 93,
+ .active_low = 1,
+ },
+ [1] = {
+ .name = "cm-x270:green",
+ .default_trigger = "heartbeat",
+ .gpio = 94,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cmx270_leds),
+ .leds = cmx270_leds,
+};
+
static struct platform_device cmx270_led_device = {
- .name = "cm-x270-led",
+ .name = "leds-gpio",
.id = -1,
+ .dev = {
+ .platform_data = &cmx270_gpio_led_pdata,
+ },
};
+static void __init cmx270_init_leds(void)
+{
+ platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
/* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
static u64 fb_dma_mask = ~(u64)0;
static struct resource cmx270_2700G_resource[] = {
/* frame buffer memory including ODFB and External SDRAM */
[0] = {
- .start = MARATHON_PHYS,
- .end = MARATHON_PHYS + 0x02000000,
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 0x01ffffff,
.flags = IORESOURCE_MEM,
},
/* Marathon registers */
[1] = {
- .start = MARATHON_PHYS + 0x03fe0000,
- .end = MARATHON_PHYS + 0x03ffffff,
+ .start = PXA_CS2_PHYS + 0x03fe0000,
+ .end = PXA_CS2_PHYS + 0x03ffffff,
.flags = IORESOURCE_MEM,
},
};
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
.id = -1,
};
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
- .name = "pata_cm_x270",
- .id = -1,
- .dev = {
- .dma_mask = &ata_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
- &cmx270_device_dm9k,
- &cmx270_rtc_device,
- &cmx270_2700G,
- &cmx270_led_device,
- &cmx270_ts_device,
- &cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
- [0] = { /* IDE/general purpose space */
- .virtual = CMX270_IDE104_VIRT,
- .pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
- .length = SZ_64M - SZ_8M,
- .type = MT_DEVICE
- },
- [1] = { /* PCI bridge */
- .virtual = CMX270_IT8152_VIRT,
- .pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
- .length = SZ_64M,
- .type = MT_DEVICE
- },
-};
+static void __init cmx270_init_2700G(void)
+{
+ platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
/*
Display definitions
keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
*/
__setup("monitor=", cmx270_set_display);
+static void __init cmx270_init_display(void)
+{
+ set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int cmx270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
.init = cmx270_ohci_init,
};
+static void __init cmx270_init_ohci(void)
+{
+ pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int cmx270_mci_init(struct device *dev,
irq_handler_t cmx270_detect_int,
void *data)
{
int err;
- /*
- * setup GPIO for PXA27x MMC controller
- */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
- /* SB-X270 uses GPIO105 as SD power enable */
- pxa_gpio_mode(105 | GPIO_OUT);
+ err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+ if (err) {
+ dev_warn(dev, "power gpio unavailable\n");
+ return err;
+ }
- /* card detect IRQ on GPIO 83 */
- pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+ gpio_direction_output(GPIO105_MMC_POWER, 0);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err)
- printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
- " request MMC card detect IRQ\n");
+ if (err) {
+ gpio_free(GPIO105_MMC_POWER);
+ dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+ " request MMC card detect IRQ\n");
+ }
return err;
}
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
- printk(KERN_DEBUG "%s: on\n", __func__);
- GPCR(105) = GPIO_bit(105);
+ dev_dbg(dev, "power on\n");
+ gpio_set_value(GPIO105_MMC_POWER, 0);
} else {
- GPSR(105) = GPIO_bit(105);
- printk(KERN_DEBUG "%s: off\n", __func__);
+ gpio_set_value(GPIO105_MMC_POWER, 1);
+ dev_dbg(dev, "power off\n");
}
}
static void cmx270_mci_exit(struct device *dev, void *data)
{
free_irq(CMX270_MMC_IRQ, data);
+ gpio_free(GPIO105_MMC_POWER);
}
static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
.exit = cmx270_mci_exit,
};
+static void __init cmx270_init_mmc(void)
+{
+ pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
#ifdef CONFIG_PM
static unsigned long sleep_save_msc[10];
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
static int __init cmx270_pm_init(void) { return 0; }
#endif
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
{
- cmx270_pm_init();
-
- set_pxa_fb_info(cmx270_display);
-
- /* register CM-X270 platform devices */
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
- /* set MCI and OHCI platform parameters */
- pxa_set_mci_info(&cmx270_mci_platform_data);
- pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
- /* This enables the STUART */
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+ cmx270_pm_init();
- /* This enables the BTUART */
- pxa_gpio_mode(GPIO42_BTRXD_MD);
- pxa_gpio_mode(GPIO43_BTTXD_MD);
- pxa_gpio_mode(GPIO44_BTCTS_MD);
- pxa_gpio_mode(GPIO45_BTRTS_MD);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+ cmx270_init_dm9000();
+ cmx270_init_rtc();
+ cmx270_init_display();
+ cmx270_init_mmc();
+ cmx270_init_ohci();
+ cmx270_init_ac97();
+ cmx270_init_touchscreen();
+ cmx270_init_leds();
+ cmx270_init_2700G();
}
static void __init cmx270_init_irq(void)
{
pxa27x_init_irq();
+ cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
- cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+ [0] = { /* PCI bridge */
+ .virtual = CMX270_IT8152_VIRT,
+ .pfn = __phys_to_pfn(PXA_CS4_PHYS),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
+};
- /* Setup interrupt for dm9000 */
- pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
- set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
- /* Setup interrupt for 2700G */
- pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
- set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+ it8152_base_address = CMX270_IT8152_VIRT;
}
-
+#else
static void __init cmx270_map_io(void)
{
pxa_map_io();
- iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
}
-
+#endif
MACHINE_START(ARMCORE, "Compulab CM-x270")
.boot_params = 0xa0000100,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e23865affc0..e5cc6ca63c7 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
/*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
*
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
-
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
-
#include <asm/mach/arch.h>
+#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
#include "generic.h"
/* GPIO IRQ usage */
-#define EM_X270_MMC_PD (105)
-#define EM_X270_ETHIRQ IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ IRQ_GPIO(13)
+#define GPIO41_ETHIRQ (41)
+#define GPIO13_MMC_CD (13)
+#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS (11)
+#define GPIO56_NAND_RB (56)
+
+static unsigned long em_x270_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MCI controller */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* QCI */
+ GPIO84_CIF_FV,
+ GPIO25_CIF_LV,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO81_CIF_DD_0,
+ GPIO55_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO50_CIF_DD_3,
+ GPIO52_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* Keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+ GPIO22_KP_MKOUT_7,
+
+ /* SSP1 */
+ GPIO26_SSP1_RXD,
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO57_SSP1_TXD,
+
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_SSP2_SFRM,
+ GPIO89_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO49_nPWE,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* power controls */
+ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
+ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
+
+ /* NAND controls */
+ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO41_GPIO, /* DM9000 interrupt */
+};
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
[0] = {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 3,
@@ -52,36 +180,34 @@ static struct resource em_x270_dm9k_resource[] = {
[2] = {
.start = EM_X270_ETHIRQ,
.end = EM_X270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
.name = "dm9000",
.id = 0,
- .num_resources = ARRAY_SIZE(em_x270_dm9k_resource),
- .resource = em_x270_dm9k_resource,
+ .num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
+ .resource = em_x270_dm9000_resource,
.dev = {
- .platform_data = &em_x270_dm9k_platdata,
+ .platform_data = &em_x270_dm9000_platdata,
}
};
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
- .name = "wm97xx-ts",
- .id = -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+ platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource em_x270_v3020_resource[] = {
[0] = {
.start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
}
};
-/* NAND flash */
-#define GPIO_NAND_CS (11)
-#define GPIO_NAND_RB (56)
+static void __init em_x270_init_rtc(void)
+{
+ platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static inline void nand_cs_on(void)
{
- GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO11_NAND_CS, 0);
}
static void nand_cs_off(void)
{
dsb();
- GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO11_NAND_CS, 1);
}
/* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
{
dsb();
- return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+ return gpio_get_value(GPIO56_NAND_RB);
}
static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
}
};
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
- &em_x270_dm9k,
- &em_x270_ts,
- &em_x270_rtc,
- &em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+ int err;
+ err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+ if (err) {
+ pr_warning("EM-X270: failed to request NAND CS gpio\n");
+ return;
+ }
+
+ gpio_direction_output(GPIO11_NAND_CS, 1);
+
+ err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+ if (err) {
+ pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+ gpio_free(GPIO11_NAND_CS);
+ return;
+ }
+
+ gpio_direction_input(GPIO56_NAND_RB);
+
+ platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.init = em_x270_ohci_init,
};
+static void __init em_x270_init_ohci(void)
+{
+ pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
- int err;
-
- /* setup GPIO for PXA27x MMC controller */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
- /* EM-X270 uses GPIO13 as SD power enable */
- pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
- err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
+ int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
__func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
- free_irq(EM_X270_MMC_IRQ, data);
+ int irq = gpio_to_irq(GPIO13_MMC_CD);
+ free_irq(irq, data);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
.exit = em_x270_mci_exit,
};
+static void __init em_x270_init_mmc(void)
+{
+ pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
/* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info em_x270_lcd_mode = {
.pixclock = 50000,
.bpp = 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
static struct pxafb_mach_info em_x270_lcd = {
.modes = &em_x270_lcd_mode,
.num_modes = 1,
- .cmap_inverse = 0,
- .cmap_static = 0,
- .lccr0 = LCCR0_PAS,
- .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
};
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
{
- /* setup LCD */
set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
- /* register EM-X270 platform devices */
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+ KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+ KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+ KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
- /* set MCI and OHCI platform parameters */
- pxa_set_mci_info(&em_x270_mci_platform_data);
- pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+ /* code map for the matrix keys */
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 3,
+ .matrix_key_map = em_x270_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+ pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
- /* setup STUART GPIOs */
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+ [0] = {
+ .desc = "sleep/wakeup",
+ .code = KEY_SUSPEND,
+ .type = EV_PWR,
+ .gpio = 1,
+ .wakeup = 1,
+ },
+};
- /* setup BTUART GPIOs */
- pxa_gpio_mode(GPIO42_BTRXD_MD);
- pxa_gpio_mode(GPIO43_BTTXD_MD);
- pxa_gpio_mode(GPIO44_BTCTS_MD);
- pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+ .buttons = gpio_keys_button,
+ .nbuttons = 1,
+};
- /* Setup interrupt for dm9000 */
- set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &em_x270_gpio_keys_data,
+ },
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+ platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+ em_x270_init_dm9000();
+ em_x270_init_rtc();
+ em_x270_init_nand();
+ em_x270_init_lcd();
+ em_x270_init_mmc();
+ em_x270_init_ohci();
+ em_x270_init_keypad();
+ em_x270_init_gpio_keys();
+ em_x270_init_ac97();
}
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 00000000000..0143eed6539
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ * ezx.c - Common code for the EZX platform.
+ *
+ * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/i2c.h>
+
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1023,
+ .dft_brightness = 1023,
+ .pwm_period_ns = 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &ezx_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+ .pixclock = 150000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 10,
+ .left_margin = 20,
+ .right_margin = 10,
+ .vsync_len = 2,
+ .upper_margin = 3,
+ .lower_margin = 2,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+ .modes = &mode_ezx_old,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+ .pixclock = 192308,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 32,
+ .depth = 18,
+ .hsync_len = 10,
+ .left_margin = 20,
+ .right_margin = 10,
+ .vsync_len = 2,
+ .upper_margin = 3,
+ .lower_margin = 2,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+ .modes = &mode_72r89803y01,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+ /* PWM backlight */
+ GPIO16_PWM0_OUT,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* For A780 support (connected with Neptune GSM chip) */
+ GPIO30_USB_P3_2, /* ICL_TXENB */
+ GPIO31_USB_P3_6, /* ICL_VPOUT */
+ GPIO90_USB_P3_5, /* ICL_VPIN */
+ GPIO91_USB_P3_1, /* ICL_XRXD */
+ GPIO56_USB_P3_4, /* ICL_VMOUT */
+ GPIO113_USB_P3_3, /* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa_set_i2c_info(NULL);
+ if (machine_is_ezx_a780() || machine_is_ezx_e680())
+ set_pxa_fb_info(&ezx_fb_info_1);
+ else
+ set_pxa_fb_info(&ezx_fb_info_2);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+ char **cmdline, struct meminfo *mi)
+{
+ /* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+ * 16MB one at 0xAC000000
+ */
+ mi->nr_banks = 2;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (32*1024*1024);
+ mi->bank[1].start = 0xac000000;
+ mi->bank[1].node = 1;
+ mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 01b2fa79021..bad5821be41 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,17 +17,15 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mfd/htc-egpio.h>
#include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
-#include <asm/gpio.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -44,7 +42,7 @@
#include "devices.h"
#include "generic.h"
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
/* SDRAM and Static Memory I/O Signals */
GPIO20_nSDCS_2,
@@ -399,6 +397,7 @@ static struct platform_pwm_backlight_data backlight_data = {
static struct platform_device backlight = {
.name = "pwm-backlight",
+ .id = -1,
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &backlight_data,
@@ -511,6 +510,37 @@ static struct platform_device pasic3 = {
* External power
*/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+ if (ret)
+ goto err_cs_ac;
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+ if (ret)
+ goto err_cs_usb;
+ ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+ if (ret)
+ goto err_chg_en;
+ ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+ if (!ret)
+ ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+ if (ret)
+ goto err_nchg_en;
+
+ return 0;
+
+err_nchg_en:
+ gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+ return ret;
+}
+
static int magician_is_ac_online(void)
{
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +557,24 @@ static void magician_set_charge(int flags)
gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
}
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+ gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
static char *magician_supplicants[] = {
"ds2760-battery.0", "backup-battery"
};
static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
.is_ac_online = magician_is_ac_online,
.is_usb_online = magician_is_usb_online,
.set_charge = magician_set_charge,
+ .exit = power_supply_exit,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
};
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 00000000000..408657a24f8
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ * Cristiano P. <cristianop@users.sourceforge.net>
+ * Jan Herman <2hp@seznam.cz>
+ * Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO13_GPIO,
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ return err;
+ }
+
+ err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+ if (err)
+ goto pwr_err;
+
+ err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto ro_err;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+ro_err:
+ gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+ free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+ gpio_free(GPIO_NR_PALMTX_SD_POWER);
+ free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmtx_mci_power,
+ .get_ro = palmtx_mci_get_ro,
+ .init = palmtx_mci_init,
+ .exit = palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmtx_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmtx_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+ .buttons = palmtx_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+
+ return 0;
+err2:
+ gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_BL_POWER);
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMTX_MAX_INTENSITY,
+ .dft_brightness = PALMTX_MAX_INTENSITY,
+ .pwm_period_ns = PALMTX_PERIOD_NS,
+ .init = palmtx_backlight_init,
+ .notify = palmtx_backlight_notify,
+ .exit = palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmtx_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+ gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+ udelay(50);
+ gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .udc_command = palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err_cs_ac;
+
+ ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+ if (ret)
+ goto err_cs_usb;
+
+ return 0;
+
+err_cs_usb:
+ gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+ return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+ return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+ gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmtx_is_ac_online,
+ .is_usb_online = palmtx_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmtx_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+ .modes = palmtx_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmtx_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmtx_pxa_keys,
+#endif
+ &palmtx_backlight,
+ &power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+ .virtual = PALMTX_PCMCIA_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+ .length = PALMTX_PCMCIA_SIZE,
+ .type = MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+ set_pxa_fb_info(&palmtx_lcd_screen);
+ pxa_set_mci_info(&palmtx_mci_platform_data);
+ pxa_set_udc_info(&palmtx_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmtx_ficp_platform_data);
+ pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+ .phys_io = PALMTX_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = palmtx_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e..30023b00e47 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -33,14 +33,30 @@
#include <asm/arch/camera.h>
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/audio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pcm990_baseboard.h>
#include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
#include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ /* USB */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ /* PWM0 */
+ GPIO16_PWM0_OUT,
+};
/*
* pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
{
int err;
- /*
- * enable GPIO for PXA27x MMC controller
- */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
"MMC card detect", data);
if (err)
@@ -333,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
*/
static int pcm990_ohci_init(struct device *dev)
{
- pxa_gpio_mode(PCM990_USB_OVERCURRENT);
- pxa_gpio_mode(PCM990_USB_PWR_EN);
/*
* disable USB port 2 and 3
* power sense is active low
@@ -361,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
* PXA27x Camera specific stuff
*/
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+ /* CIF */
+ GPIO98_CIF_DD_0,
+ GPIO105_CIF_DD_1,
+ GPIO104_CIF_DD_2,
+ GPIO103_CIF_DD_3,
+ GPIO95_CIF_DD_4,
+ GPIO94_CIF_DD_5,
+ GPIO93_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+ GPIO107_CIF_DD_8,
+ GPIO106_CIF_DD_9,
+ GPIO42_CIF_MCLK,
+ GPIO45_CIF_PCLK,
+ GPIO43_CIF_FV,
+ GPIO44_CIF_LV,
+};
+
static int pcm990_pxacamera_init(struct device *dev)
{
- pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
- pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
- pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
- pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
- pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
- pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
- pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
- pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
- pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
- pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
- pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
- pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
- pxa_gpio_mode(GPIO43_CIF_FV_MD);
- pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
return 0;
}
@@ -449,8 +457,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
*/
void __init pcm990_baseboard_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
/* register CPLD access */
- iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+ iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
/* register CPLD's IRQ controller */
pcm990_init_irq();
@@ -458,7 +468,6 @@ void __init pcm990_baseboard_init(void)
#ifndef CONFIG_PCM990_DISPLAY_NONE
set_pxa_fb_info(&pcm990_fbinfo);
#endif
- pxa_gpio_mode(GPIO16_PWM0_MD);
platform_device_register(&pcm990_backlight_device);
/* MMC */
@@ -473,9 +482,8 @@ void __init pcm990_baseboard_init(void)
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
- i2c_register_board_info(0, pcm990_i2c_devices,
- ARRAY_SIZE(pcm990_i2c_devices));
+ i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
#endif
- printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+ printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
}
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dace3820f1e..e7d0fcd9b43 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,7 +38,6 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 00af7f2fed6..0bb31982fb6 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label)
mutex_unlock(&ssp_lock);
- if (ssp->port_id != port)
+ if (&ssp->node == &ssp_list)
return NULL;
return ssp;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c2cbd66db81..ab4a9f57991 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,8 +467,8 @@ static struct platform_device *devices[] __initdata = {
static void tosa_poweroff(void)
{
- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
- GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+ gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+ gpio_set_value(TOSA_GPIO_ON_RESET, 1);
mdelay(1000);
arm_machine_restart('h');
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-11 13:49:01 +0000