diff options
Diffstat (limited to 'arch/arm/mach-pxa')
55 files changed, 230 insertions, 139 deletions
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 20822934251..2f71b3fbd31 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -822,7 +822,7 @@ MACHINE_START(BALLOON3, "Balloon3") .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = balloon3_init, .atag_offset = 0x100, .restart = pxa_restart, diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 9a8760b7291..c092730749b 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -153,7 +153,7 @@ MACHINE_START(CAPC7117, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = capc7117_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index a103c8ffea9..bb99f59a36d 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -520,7 +520,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .init_irq = cmx2xx_init_irq, /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */ .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = cmx2xx_init, #ifdef CONFIG_PCI .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index cc2b23afcaa..8091aac89ed 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -854,7 +854,7 @@ MACHINE_START(CM_X300, "CM-X300 module") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = cm_x300_init, .fixup = cm_x300_fixup, .restart = pxa_restart, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index b2f227d3612..5f9d9303b34 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -313,7 +313,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END @@ -324,7 +324,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index a9c9c163dd9..f1a1ac1fbd8 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -189,7 +189,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 25515cd7e68..f6cc8b0ab82 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -259,7 +259,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 7c83f52c549..a5b8fead7d6 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -733,7 +733,7 @@ MACHINE_START(CORGI, "SHARP Corgi") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = corgi_restart, MACHINE_END #endif @@ -746,7 +746,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = corgi_restart, MACHINE_END #endif @@ -759,7 +759,7 @@ MACHINE_START(HUSKY, "SHARP Husky") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = corgi_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 7039f44b364..fadfff8feae 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -278,6 +278,6 @@ MACHINE_START(CSB726, "Cogent CSB726") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = csb726_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 1b6411439ec..446563a7d1a 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1298,7 +1298,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = em_x270_init, .restart = pxa_restart, MACHINE_END @@ -1309,7 +1309,7 @@ MACHINE_START(EXEDA, "Compulab eXeda") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = em_x270_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index be2ee9bf5c6..8280ebcaab9 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -195,7 +195,7 @@ MACHINE_START(E330, "Toshiba e330") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e330_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -246,7 +246,7 @@ MACHINE_START(E350, "Toshiba e350") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e350_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -370,7 +370,7 @@ MACHINE_START(E400, "Toshiba e400") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e400_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -566,7 +566,7 @@ MACHINE_START(E740, "Toshiba e740") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e740_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -765,7 +765,7 @@ MACHINE_START(E750, "Toshiba e750") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e750_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -977,7 +977,7 @@ MACHINE_START(E800, "Toshiba e800") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e800_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index dc58fa0edb6..dca10709be8 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -802,7 +802,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = a780_init, .restart = pxa_restart, MACHINE_END @@ -869,7 +869,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = e680_init, .restart = pxa_restart, MACHINE_END @@ -936,7 +936,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = a1200_init, .restart = pxa_restart, MACHINE_END @@ -1128,7 +1128,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = a910_init, .restart = pxa_restart, MACHINE_END @@ -1195,7 +1195,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = e6_init, .restart = pxa_restart, MACHINE_END @@ -1236,7 +1236,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = e2_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 42d5cca6625..fd7ea39b78c 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -10,9 +10,8 @@ */ struct irq_data; -struct sys_timer; -extern struct sys_timer pxa_timer; +extern void pxa_timer_init(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 60755a6bb1c..00b92dad7b8 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -238,7 +238,7 @@ MACHINE_START(GUMSTIX, "Gumstix") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = gumstix_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index e7dec589f01..875ec335149 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -208,7 +208,7 @@ MACHINE_START(H5400, "HP iPAQ H5000") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = h5000_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index 2962de898da..7a8d749a07b 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -164,6 +164,6 @@ MACHINE_START(HIMALAYA, "HTC Himalaya") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = himalaya_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index e2c6391863f..133109ec733 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -900,6 +900,6 @@ MACHINE_START(H4700, "HP iPAQ HX4700") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = hx4700_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 1d02eabc9c6..fe31bfcbb8d 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -196,7 +196,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = icontrol_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 64507cdd2e8..343c4e3a7c5 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -279,7 +279,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = idp_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h index 2d3f14e3be2..714b6574393 100644 --- a/arch/arm/mach-pxa/include/mach/palmtreo.h +++ b/arch/arm/mach-pxa/include/mach/palmtreo.h @@ -38,13 +38,14 @@ #define GPIO_NR_TREO_LCD_POWER 25 /* Treo680 specific GPIOs */ -#ifdef CONFIG_MACH_TREO680 #define GPIO_NR_TREO680_SD_READONLY 33 #define GPIO_NR_TREO680_SD_POWER 42 #define GPIO_NR_TREO680_VIBRATE_EN 44 #define GPIO_NR_TREO680_KEYB_BL 24 #define GPIO_NR_TREO680_BT_EN 43 -#endif /* CONFIG_MACH_TREO680 */ +#define GPIO_NR_TREO680_LCD_POWER 77 +#define GPIO_NR_TREO680_LCD_EN 86 +#define GPIO_NR_TREO680_LCD_EN_N 25 /* Centro685 specific GPIOs */ #define GPIO_NR_CENTRO_SD_POWER 21 diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index b7de471b273..b802f285fe0 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -37,6 +37,7 @@ #define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */ #define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */ #define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */ +#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */ /* * More handy macros for PCMCIA diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 5519a34b667..8c27757e68f 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -72,8 +72,3 @@ static inline void arch_decomp_setup(void) uart_is_pxa = 0; } } - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 402874f9021..e848c4607ba 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -443,7 +443,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = littleton_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 1a63eaa8986..1255ee00f3d 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -503,7 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = lpd270_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 553056d9a3c..d8a1be619f2 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -650,7 +650,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") .nr_irqs = LUBBOCK_NR_IRQS, .init_irq = lubbock_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = lubbock_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index f7922404d94..f44532fc648 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -774,6 +774,6 @@ MACHINE_START(MAGICIAN, "HTC Magician") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = magician_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index f27a61ee7ac..7a12c1ba90f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -714,7 +714,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = mainstone_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 2831308dba6..f8979b943cb 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -762,6 +762,6 @@ MACHINE_START(MIOA701, "MIO A701") .init_irq = &pxa27x_init_irq, .handle_irq = &pxa27x_handle_irq, .init_machine = mioa701_machine_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = mioa701_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 152efbf093f..854f1f562d6 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -93,7 +93,7 @@ static void __init mp900c_init(void) /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */ MACHINE_START(NEC_MP900, "MobilePro900/C") .atag_offset = 0x220100, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .map_io = pxa25x_map_io, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 8bcc96e3b0d..909b713e578 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -347,7 +347,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmld_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 5ca7b904a30..5033fd07968 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -208,7 +208,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmt5_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index ca924cfedfc..100b176f7e8 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -542,7 +542,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmtc_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 32e0d799835..0742721ced2 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -363,7 +363,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmte2_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 3f3c48f2f7c..d82a50b4a80 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -98,9 +98,6 @@ static unsigned long treo_pin_config[] __initdata = { GPIO96_KP_MKOUT_6, GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */ - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - /* Quick Capture Interface */ GPIO84_CIF_FV, GPIO85_CIF_LV, @@ -140,6 +137,12 @@ static unsigned long treo680_pin_config[] __initdata = { /* MATRIX KEYPAD - different wake up source */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, GPIO99_KP_MKIN_5, + + /* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */ + GPIOxx_LCD_16BPP, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, }; #endif /* CONFIG_MACH_TREO680 */ @@ -155,13 +158,16 @@ static unsigned long centro685_pin_config[] __initdata = { /* MATRIX KEYPAD - different wake up source */ GPIO100_KP_MKIN_0, GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + + /* LCD */ + GPIOxx_LCD_TFT_16BPP, }; #endif /* CONFIG_MACH_CENTRO */ /****************************************************************************** * GPIO keyboard ******************************************************************************/ -#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x) static unsigned int treo680_matrix_keys[] = { KEY(0, 0, KEY_F8), /* Red/Off/Power */ KEY(0, 1, KEY_LEFT), @@ -309,7 +315,7 @@ static inline void palmtreo_kpc_init(void) {} /****************************************************************************** * USB host ******************************************************************************/ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) static struct pxaohci_platform_data treo680_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT1 | ENABLE_PORT3, @@ -328,7 +334,6 @@ static inline void palmtreo_uhc_init(void) {} /****************************************************************************** * Vibra and LEDs ******************************************************************************/ -#ifdef CONFIG_MACH_TREO680 static struct gpio_led treo680_gpio_leds[] = { { .name = "treo680:vibra:vibra", @@ -379,20 +384,46 @@ static struct gpio_led_platform_data centro_gpio_led_info = { static struct platform_device palmtreo_leds = { .name = "leds-gpio", .id = -1, - .dev = { - .platform_data = &treo680_gpio_led_info, - } }; static void __init palmtreo_leds_init(void) { if (machine_is_centro()) palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info; + else if (machine_is_treo680()) + palmtreo_leds.dev.platform_data = &treo680_gpio_led_info; platform_device_register(&palmtreo_leds); } + +/****************************************************************************** + * diskonchip docg4 flash + ******************************************************************************/ +#if defined(CONFIG_MACH_TREO680) +/* REVISIT: does the centro have this device also? */ +#if IS_ENABLED(CONFIG_MTD_NAND_DOCG4) +static struct resource docg4_resources[] = { + { + .start = 0x00000000, + .end = 0x00001FFF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device treo680_docg4_flash = { + .name = "docg4", + .id = -1, + .resource = docg4_resources, + .num_resources = ARRAY_SIZE(docg4_resources), +}; + +static void __init treo680_docg4_flash_init(void) +{ + platform_device_register(&treo680_docg4_flash); +} #else -static inline void palmtreo_leds_init(void) {} +static inline void treo680_docg4_flash_init(void) {} +#endif #endif /****************************************************************************** @@ -424,12 +455,62 @@ static void __init palmphone_common_init(void) } #ifdef CONFIG_MACH_TREO680 +void __init treo680_gpio_init(void) +{ + unsigned int gpio; + + /* drive all three lcd gpios high initially */ + const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT; + + /* + * LCD GPIO initialization... + */ + + /* + * This is likely the power to the lcd. Toggling it low/high appears to + * turn the lcd off/on. Can be toggled after lcd is initialized without + * any apparent adverse effects to the lcd operation. Note that this + * gpio line is used by the lcd controller as the L_BIAS signal, but + * treo680 configures it as gpio. + */ + gpio = GPIO_NR_TREO680_LCD_POWER; + if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0) + goto fail; + + /* + * These two are called "enables", for lack of a better understanding. + * If either of these are toggled after the lcd is initialized, the + * image becomes degraded. N.B. The IPL shipped with the treo + * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high. If + * the IPL is ever reprogrammed, this initialization may be need to be + * revisited. + */ + gpio = GPIO_NR_TREO680_LCD_EN; + if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0) + goto fail; + gpio = GPIO_NR_TREO680_LCD_EN_N; + if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0) + goto fail; + + /* driving this low turns LCD on */ + gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0); + + return; + fail: + pr_err("gpio %d initialization failed\n", gpio); + gpio_free(GPIO_NR_TREO680_LCD_POWER); + gpio_free(GPIO_NR_TREO680_LCD_EN); + gpio_free(GPIO_NR_TREO680_LCD_EN_N); +} + static void __init treo680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); palmphone_common_init(); + treo680_gpio_init(); palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); + treo680_docg4_flash_init(); } #endif @@ -451,7 +532,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = treo680_init, .restart = pxa_restart, MACHINE_END @@ -465,7 +546,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = centro_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 8b4366628a1..627c93a7364 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -366,7 +366,7 @@ MACHINE_START(PALMTX, "Palm T|X") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmtx_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 8cdd4f58e25..18b7fcd9859 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -404,7 +404,7 @@ MACHINE_START(PALMZ72, "Palm Zire72") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmz72_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index fe9054435b6..69918c7e3f1 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -263,7 +263,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = pcm027_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 2910bb935c7..50ccd5f1d56 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -469,7 +469,7 @@ MACHINE_START(POODLE, "SHARP Poodle") .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = poodle_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index c9192cea003..3835979a0dd 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -55,7 +55,7 @@ DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)") .map_io = pxa3xx_map_io, .init_irq = pxa3xx_dt_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, .init_machine = pxa3xx_dt_init, .dt_compat = pxa3xx_dt_board_compat, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 616cb87b617..3203a9f5b4a 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -53,17 +53,25 @@ static unsigned long ac97_reset_config[] = { GPIO95_AC97_nRESET, }; -void pxa27x_assert_ac97reset(int reset_gpio, int on) +void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio) { + /* + * This helper function is used to work around a bug in the pxa27x's + * ac97 controller during a warm reset. The configuration of the + * reset_gpio is changed as follows: + * to_gpio == true: configured to generic output gpio and driven high + * to_gpio == false: configured to ac97 controller alt fn AC97_nRESET + */ + if (reset_gpio == 113) - pxa2xx_mfp_config(on ? &ac97_reset_config[0] : - &ac97_reset_config[1], 1); + pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] : + &ac97_reset_config[1], 1); if (reset_gpio == 95) - pxa2xx_mfp_config(on ? &ac97_reset_config[2] : - &ac97_reset_config[3], 1); + pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] : + &ac97_reset_config[3], 1); } -EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset); +EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); /* Crystal clock: 13MHz */ #define BASE_CLK 13000000 @@ -230,6 +238,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 25b08bfa997..af41888acbd 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -1095,7 +1095,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -1108,7 +1108,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -1121,7 +1121,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 08d87a5d263..710c493eac8 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -601,7 +601,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = saar_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 79923058d10..f38aa890b2c 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void) __raw_writel(csadrcfg[1], CSADRCFG1); __raw_writel(csadrcfg[2], CSADRCFG2); __raw_writel(csadrcfg[3], CSADRCFG3); + /* CSMSADRCFG wakes up in its default state (0), so we need to set it */ + __raw_writel(0x2, CSMSADRCFG); } static struct syscore_ops smemc_syscore_ops = { @@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_ops = { static int __init smemc_init(void) { - if (cpu_is_pxa3xx()) + if (cpu_is_pxa3xx()) { + /* + * The only documentation we have on the + * Chip Select Configuration Register (CSMSADRCFG) is that + * it must be programmed to 0x2. + * Moreover, in the bit definitions, the second bit + * (CSMSADRCFG[1]) is called "SETALWAYS". + * Other bits are reserved in this register. + */ + __raw_writel(0x2, CSMSADRCFG); + register_syscore_ops(&smemc_syscore_ops); + } return 0; } diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2073f0e6db0..362726c49c7 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -732,7 +732,7 @@ static inline void spitz_lcd_init(void) {} #endif /****************************************************************************** - * Framebuffer + * NAND Flash ******************************************************************************/ #if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE) static struct mtd_partition spitz_nand_partitions[] = { @@ -858,7 +858,7 @@ static inline void spitz_nor_init(void) {} #endif /****************************************************************************** - * GPIO expander + * I2C devices ******************************************************************************/ #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) static struct pca953x_platform_data akita_pca953x_pdata = { @@ -986,7 +986,7 @@ MACHINE_START(SPITZ, "SHARP Spitz") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = spitz_restart, MACHINE_END #endif @@ -1000,7 +1000,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = spitz_restart, MACHINE_END #endif @@ -1014,7 +1014,7 @@ MACHINE_START(AKITA, "SHARP Akita") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = spitz_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 456560b5aad..88fde43c948 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1006,7 +1006,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = imote2_init, .atag_offset = 0x100, .restart = pxa_restart, @@ -1019,7 +1019,7 @@ MACHINE_START(STARGATE2, "Stargate 2") .nr_irqs = STARGATE_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = stargate2_init, .atag_offset = 0x100, .restart = pxa_restart, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 1a25f8a7b0c..f55979c09a5 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -494,7 +494,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = tavorevb_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 4bc47d63698..8f1ee92aea3 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -89,48 +89,10 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) } } -static struct clock_event_device ckevt_pxa_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = pxa_osmr0_set_next_event, - .set_mode = pxa_osmr0_set_mode, -}; - -static struct irqaction pxa_ost0_irq = { - .name = "ost0", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = pxa_ost0_interrupt, - .dev_id = &ckevt_pxa_osmr0, -}; - -static void __init pxa_timer_init(void) -{ - unsigned long clock_tick_rate = get_clock_tick_rate(); - - writel_relaxed(0, OIER); - writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); - - setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); - - clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); - ckevt_pxa_osmr0.max_delta_ns = - clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); - ckevt_pxa_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1; - ckevt_pxa_osmr0.cpumask = cpumask_of(0); - - setup_irq(IRQ_OST0, &pxa_ost0_irq); - - clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, - clocksource_mmio_readl_up); - clockevents_register_device(&ckevt_pxa_osmr0); -} - #ifdef CONFIG_PM static unsigned long osmr[4], oier, oscr; -static void pxa_timer_suspend(void) +static void pxa_timer_suspend(struct clock_event_device *cedev) { osmr[0] = readl_relaxed(OSMR0); osmr[1] = readl_relaxed(OSMR1); @@ -140,7 +102,7 @@ static void pxa_timer_suspend(void) oscr = readl_relaxed(OSCR); } -static void pxa_timer_resume(void) +static void pxa_timer_resume(struct clock_event_device *cedev) { /* * Ensure that we have at least MIN_OSCR_DELTA between match @@ -163,8 +125,38 @@ static void pxa_timer_resume(void) #define pxa_timer_resume NULL #endif -struct sys_timer pxa_timer = { - .init = pxa_timer_init, +static struct clock_event_device ckevt_pxa_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = pxa_osmr0_set_next_event, + .set_mode = pxa_osmr0_set_mode, .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, }; + +static struct irqaction pxa_ost0_irq = { + .name = "ost0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = pxa_ost0_interrupt, + .dev_id = &ckevt_pxa_osmr0, +}; + +void __init pxa_timer_init(void) +{ + unsigned long clock_tick_rate = get_clock_tick_rate(); + + writel_relaxed(0, OIER); + writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); + + setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); + + ckevt_pxa_osmr0.cpumask = cpumask_of(0); + + setup_irq(IRQ_OST0, &pxa_ost0_irq); + + clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, + clocksource_mmio_readl_up); + clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate, + MIN_OSCR_DELTA * 2, 0x7fffffff); +} diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 233629edf7e..9e7998d3635 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -982,6 +982,6 @@ MACHINE_START(TOSA, "SHARP Tosa") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = tosa_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = tosa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index fbbcbed4d1d..c58043462ac 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -561,7 +561,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END @@ -573,6 +573,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index c773e4dded6..9c363c081d3 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -997,7 +997,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") .nr_irqs = PXA_NR_IRQS, .init_irq = viper_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = viper_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 491b6c9a2a9..aa89488f961 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -719,7 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = vpac270_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 4275713ccd1..13b1d4586d7 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -185,7 +185,7 @@ MACHINE_START(XCEP, "Iskratel XCEP") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 97529face7a..989903a7e46 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -722,7 +722,7 @@ MACHINE_START(ZIPIT2, "Zipit Z2") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = z2_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index abd3aa14508..f5d43643456 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -910,7 +910,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = zeus_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 226279fac9d..1f00d650ac2 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -428,7 +428,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = zylonite_init, .restart = pxa_restart, MACHINE_END |