diff options
Diffstat (limited to 'arch/arm/mach-realview')
24 files changed, 1088 insertions, 609 deletions
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index b6ec1062777..d4cfa214538 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP config REALVIEW_EB_ARM11MP_REVB bool "Support ARM11MPCore RevB tile" depends on REALVIEW_EB_ARM11MP - default n help Enable support for the ARM11MPCore RevB tile on the Realview platform. Since there are device address differences, a @@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176 help Include support for the ARM(R) RealView ARM1176 Platform Baseboard. +config REALVIEW_PB1176_SECURE_FLASH + bool "Allow access to the secure flash memory block" + depends on MACH_REALVIEW_PB1176 + default n + help + Select this option if Linux will only run in secure mode on the + RealView PB1176 platform and access to the secure flash memory + block (64MB @ 0x3c000000) is required. + config MACH_REALVIEW_PBA8 bool "Support RealView/PB-A8 platform" select CPU_V7 @@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8 PB-A8 is a platform with an on-board Cortex-A8 and has support for PCI-E and Compact Flash. +config MACH_REALVIEW_PBX + bool "Support RealView/PBX platform" + select ARM_GIC + select HAVE_PATA_PLATFORM + help + Include support for the ARM(R) RealView PBX platform. + config REALVIEW_HIGH_PHYS_OFFSET bool "High physical base address for the RealView platform" depends on !MACH_REALVIEW_PB1176 diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 7bea8ffc4b5..e704edb733c 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o +obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 076acbc5070..9ea9c05093c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -48,6 +48,9 @@ #include <asm/hardware/gic.h> +#include <mach/platform.h> +#include <mach/irqs.h> + #include "core.h" #include "clock.h" @@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt) { unsigned long flags; u32 val; + u32 led = 1 << smp_processor_id(); local_irq_save(flags); val = readl(VA_LEDS_BASE); switch (ledevt) { case led_idle_start: - val = val & ~REALVIEW_SYS_LED0; + val = val & ~led; break; case led_idle_end: - val = val | REALVIEW_SYS_LED0; + val = val | led; break; case led_timer: - val = val ^ REALVIEW_SYS_LED1; + val = val ^ REALVIEW_SYS_LED7; break; case led_halted: diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 21c08637683..59a337ba4be 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data; extern struct mmc_platform_data realview_mmc1_plat_data; extern struct clcd_board clcd_plat_data; extern void __iomem *gic_cpu_base_addr; -#ifdef CONFIG_LOCAL_TIMERS -extern void __iomem *twd_base; -#endif extern void __iomem *timer0_va_base; extern void __iomem *timer1_va_base; extern void __iomem *timer2_va_base; diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 268d7701fa9..794a8d91a6a 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -62,111 +62,6 @@ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ #endif -#define IRQ_EB_GIC_START 32 - -/* - * RealView EB interrupt sources - */ -#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ -#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ -#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ -#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ -#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ -#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ -#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ -#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ -#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ -#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ -#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ -#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ -#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ -#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ -#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ -#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ - -/* - * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) - */ -#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) -#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) -#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) -#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) -#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) -#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) -#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) -#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) -#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) -#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) -#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ -#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ -#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ -#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ -#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) -#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) - -#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) -#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) -#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) -#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) -#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) -#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) -#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) -#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) -#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) -#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) -#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) -#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) - -#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) -#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) -#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) - -#define IRQ_EB11MP_UART2 -1 -#define IRQ_EB11MP_UART3 -1 -#define IRQ_EB11MP_CLCD -1 -#define IRQ_EB11MP_DMA -1 -#define IRQ_EB11MP_WDOG -1 -#define IRQ_EB11MP_GPIO0 -1 -#define IRQ_EB11MP_GPIO1 -1 -#define IRQ_EB11MP_GPIO2 -1 -#define IRQ_EB11MP_SCI -1 -#define IRQ_EB11MP_SSP -1 - -#define NR_GIC_EB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - /* * Core tile identification (REALVIEW_SYS_PROCID) */ diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 858eea7b1ad..98f8e7eeacc 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -32,6 +32,8 @@ #define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ #define REALVIEW_PB1176_FLASH_BASE 0x30000000 #define REALVIEW_PB1176_FLASH_SIZE SZ_64M +#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */ +#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M #define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ #define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ @@ -71,82 +73,4 @@ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ -/* - * Irqs - */ -#define IRQ_DC1176_GIC_START 32 -#define IRQ_PB1176_GIC_START 64 - -/* - * ARM1176 DevChip interrupt sources (primary GIC) - */ -#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ -#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ -#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ -#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ -#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ -#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) -#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) -#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) -#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) -#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ -#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ -#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ -#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ - -#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ -#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ - -/* - * RealView PB1176 interrupt sources (secondary GIC) - */ -#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ -#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ -#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ -#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ -#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) -#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ -#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ -#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) -#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) -#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ -#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ - -#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) - -#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ - -#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) -#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) -#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ -#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ - -#define IRQ_PB1176_GPIO0 -1 -#define IRQ_PB1176_SSP -1 -#define IRQ_PB1176_SCTL -1 - -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB1176 */ - #endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index 53ea0e7a126..f0d68e0fea0 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -81,105 +81,4 @@ #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ -/* - * Irqs - */ -#define IRQ_TC11MP_GIC_START 32 -#define IRQ_PB11MP_GIC_START 64 - -/* - * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) - */ -#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) -#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) -#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) -#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) -#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) -#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) -#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) -#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) -#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) -#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) -#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ -#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ -#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ -#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ -#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) -#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) - -#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) -#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) -#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) -#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) -#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) -#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) -#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) -#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) -#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) -#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) -#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) -#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) - -#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) -#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) -#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) - -/* - * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) - */ -#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ -#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ -#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ -#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ -#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ -#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ -#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ -#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ -#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - #endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h index 307f97b16e5..4dfc67a4f45 100644 --- a/arch/arm/mach-realview/include/mach/board-pba8.h +++ b/arch/arm/mach-realview/include/mach/board-pba8.h @@ -70,81 +70,4 @@ #define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ #define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ -/* - * Irqs - */ -#define IRQ_PBA8_GIC_START 32 - -/* L220 -#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) -#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) -#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) -*/ - -/* - * PB-A8 on-board gic irq sources - */ -#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ -#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ -#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ -#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ -#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ - -/* ... */ -#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) -#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) -#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) -#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) - -#define IRQ_PBA8_SMC -1 -#define IRQ_PBA8_SCTL -1 - -#define NR_GIC_PBA8 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBA8 - */ -#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) - -#if defined(CONFIG_MACH_REALVIEW_PBA8) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBA8 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBA8 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBA8 */ - #endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h new file mode 100644 index 00000000000..848bfff6d8f --- /dev/null +++ b/arch/arm/mach-realview/include/mach/board-pbx.h @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-realview/include/mach/board-pbx.h + * + * Copyright (C) 2009 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_BOARD_PBX_H +#define __ASM_ARCH_BOARD_PBX_H + +#include <mach/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PBX_FLASH0_BASE 0x40000000 +#define REALVIEW_PBX_FLASH0_SIZE SZ_64M +#define REALVIEW_PBX_FLASH1_BASE 0x44000000 +#define REALVIEW_PBX_FLASH1_SIZE SZ_64M +#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +/* + * Tile-specific addresses + */ +#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */ +#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */ +#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600 +#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700 +#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100 +#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */ +#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */ + +#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74 + +/* + * PBX PCI regions + */ +#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Core tile identification (REALVIEW_SYS_PROCID) + */ +#define REALVIEW_PBX_PROC_MASK 0xFF000000 +#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000 +#define REALVIEW_PBX_PROC_ARM9 0x02000000 +#define REALVIEW_PBX_PROC_ARM11 0x04000000 +#define REALVIEW_PBX_PROC_ARM11MP 0x06000000 +#define REALVIEW_PBX_PROC_A9MP 0x0C000000 +#define REALVIEW_PBX_PROC_A8 0x0E000000 + +#define check_pbx_proc(proc_type) \ + ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \ + == proc_type) + +#ifdef CONFIG_MACH_REALVIEW_PBX +#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP) +#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP) +#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8) +#else +#define core_tile_pbx11mp() 0 +#define core_tile_pbxa9mp() 0 +#define core_tile_pbxa8() 0 +#endif + +#endif /* __ASM_ARCH_BOARD_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 92dbcb9e179..932d8af1806 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -12,7 +12,8 @@ #if defined(CONFIG_MACH_REALVIEW_EB) || \ defined(CONFIG_MACH_REALVIEW_PB11MP) || \ - defined(CONFIG_MACH_REALVIEW_PBA8) + defined(CONFIG_MACH_REALVIEW_PBA8) || \ + defined(CONFIG_MACH_REALVIEW_PBX) #ifndef DEBUG_LL_UART_OFFSET #define DEBUG_LL_UART_OFFSET 0x00009000 #elif DEBUG_LL_UART_OFFSET != 0x00009000 diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h new file mode 100644 index 00000000000..204d5378f30 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-eb.h @@ -0,0 +1,129 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-eb.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_EB_H +#define __MACH_IRQS_EB_H + +#define IRQ_EB_GIC_START 32 + +/* + * RealView EB interrupt sources + */ +#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ +#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ +#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ +#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ +#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ +#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ +#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ +#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ +#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ +#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ +#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ +#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ +#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ +#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ +#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ +#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ + +/* + * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) + */ +#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) +#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) +#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) +#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) +#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) +#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) +#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) +#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) +#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) +#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) +#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ +#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ +#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ +#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ +#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) +#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) + +#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) +#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) +#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) +#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) +#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) +#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) +#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) +#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) +#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) +#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) +#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) +#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) + +#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) +#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) +#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) + +#define IRQ_EB11MP_UART2 -1 +#define IRQ_EB11MP_UART3 -1 +#define IRQ_EB11MP_CLCD -1 +#define IRQ_EB11MP_DMA -1 +#define IRQ_EB11MP_WDOG -1 +#define IRQ_EB11MP_GPIO0 -1 +#define IRQ_EB11MP_GPIO1 -1 +#define IRQ_EB11MP_GPIO2 -1 +#define IRQ_EB11MP_SCI -1 +#define IRQ_EB11MP_SSP -1 + +#define NR_GIC_EB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_EB + */ +#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_EB) \ + && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_EB +#endif + +#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ + && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_EB11MP +#endif + +#endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h new file mode 100644 index 00000000000..2410d4f8ddd --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -0,0 +1,99 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB1176_H +#define __MACH_IRQS_PB1176_H + +#define IRQ_DC1176_GIC_START 32 +#define IRQ_PB1176_GIC_START 64 + +/* + * ARM1176 DevChip interrupt sources (primary GIC) + */ +#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ +#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ +#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ +#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ +#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ +#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) +#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) +#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) +#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) +#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ +#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ +#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ +#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ + +#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ +#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ + +/* + * RealView PB1176 interrupt sources (secondary GIC) + */ +#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ +#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ +#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ +#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ +#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) +#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ +#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ +#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) +#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) +#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ +#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ + +#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) + +#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ + +#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) +#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) +#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ +#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ + +#define IRQ_PB1176_GPIO0 -1 +#define IRQ_PB1176_SSP -1 +#define IRQ_PB1176_SCTL -1 + +#define NR_GIC_PB1176 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB1176 + */ +#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB1176) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB1176 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB1176 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB1176 */ + +#endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h new file mode 100644 index 00000000000..34e255add21 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h @@ -0,0 +1,122 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB11MP_H +#define __MACH_IRQS_PB11MP_H + +#define IRQ_TC11MP_GIC_START 32 +#define IRQ_PB11MP_GIC_START 64 + +/* + * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) + */ +#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) +#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) +#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) +#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) +#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) +#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) +#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) +#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) +#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) +#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) +#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ +#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ +#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ +#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ +#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) +#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) + +#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) +#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) +#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) +#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) +#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) +#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) +#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) +#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) +#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) +#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) +#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) +#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) + +#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) +#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) + +/* + * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) + */ +#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ +#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ +#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ +#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ +#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ +#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ +#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ +#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ +#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PB11MP_SMC -1 +#define IRQ_PB11MP_SCTL -1 + +#define NR_GIC_PB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB11MP + */ +#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB11MP) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB11MP +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB11MP +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB11MP */ + +#endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h new file mode 100644 index 00000000000..86792a9f2ab --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h @@ -0,0 +1,98 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pba8.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PBA8_H +#define __MACH_IRQS_PBA8_H + +#define IRQ_PBA8_GIC_START 32 + +/* L220 +#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) +#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) +#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) +*/ + +/* + * PB-A8 on-board gic irq sources + */ +#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ +#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ +#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ +#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ +#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ + +/* ... */ +#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) +#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) +#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) +#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) + +#define IRQ_PBA8_SMC -1 +#define IRQ_PBA8_SCTL -1 + +#define NR_GIC_PBA8 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBA8 + */ +#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) + +#if defined(CONFIG_MACH_REALVIEW_PBA8) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBA8 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBA8 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBA8 */ + +#endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h new file mode 100644 index 00000000000..deaad4302b1 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pbx.h + * + * Copyright (C) 2009 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __MACH_IRQS_PBX_H +#define __MACH_IRQS_PBX_H + +#define IRQ_PBX_GIC_START 32 + +/* L220 +#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29) +#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30) +#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31) +*/ + +/* + * PBX on-board gic irq sources + */ +#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */ +#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */ +#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */ +#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */ +#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */ +#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33) +#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34) +#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35) +#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36) +#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37) +#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38) +#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39) + +#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */ +#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ +/* ... */ +#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ +#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45) +#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46) +#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47) + +/* ... */ +#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) +#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51) +#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52) +#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53) + +#define IRQ_PBX_SMC -1 +#define IRQ_PBX_SCTL -1 + +#define NR_GIC_PBX 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBX + */ +#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PBX) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBX +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBX +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBX */ + +#endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h index fe5cb987aa2..78854f2fa32 100644 --- a/arch/arm/mach-realview/include/mach/irqs.h +++ b/arch/arm/mach-realview/include/mach/irqs.h @@ -22,10 +22,11 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#include <mach/board-eb.h> -#include <mach/board-pb11mp.h> -#include <mach/board-pb1176.h> -#include <mach/board-pba8.h> +#include <mach/irqs-eb.h> +#include <mach/irqs-pb11mp.h> +#include <mach/irqs-pb1176.h> +#include <mach/irqs-pba8.h> +#include <mach/irqs-pbx.h> #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h deleted file mode 100644 index d55802d645a..00000000000 --- a/arch/arm/mach-realview/include/mach/scu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASMARM_ARCH_SCU_H -#define __ASMARM_ARCH_SCU_H - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h index 415d634d52a..83050378ffd 100644 --- a/arch/arm/mach-realview/include/mach/uncompress.h +++ b/arch/arm/mach-realview/include/mach/uncompress.h @@ -24,6 +24,7 @@ #include <mach/board-pb11mp.h> #include <mach/board-pb1176.h> #include <mach/board-pba8.h> +#include <mach/board-pbx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) #define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) @@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void) return REALVIEW_PB1176_UART0_BASE; else if (machine_is_realview_pba8()) return REALVIEW_PBA8_UART0_BASE; + else if (machine_is_realview_pbx()) + return REALVIEW_PBX_UART0_BASE; else return 0; } diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index 1c01d13460f..60b4e111f45 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -9,196 +9,18 @@ * published by the Free Software Foundation. */ #include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/device.h> #include <linux/smp.h> -#include <linux/jiffies.h> -#include <linux/percpu.h> #include <linux/clockchips.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/hardware/arm_twd.h> -#include <asm/hardware/gic.h> -#include <mach/hardware.h> #include <asm/irq.h> - -static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); - -/* - * Used on SMP for either the local timer or IPI_TIMER - */ -void local_timer_interrupt(void) -{ - struct clock_event_device *clk = &__get_cpu_var(local_clockevent); - - clk->event_handler(clk); -} - -#ifdef CONFIG_LOCAL_TIMERS - -/* set up by the platform code */ -void __iomem *twd_base; - -static unsigned long mpcore_timer_rate; - -static void local_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ - ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE - | TWD_TIMER_CONTROL_PERIODIC; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); -} - -static int local_timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); - - __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); - __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL); - - return 0; -} - -/* - * local_timer_ack: checks for a local timer interrupt. - * - * If a local timer interrupt has occurred, acknowledge and return 1. - * Otherwise, return 0. - */ -int local_timer_ack(void) -{ - if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { - __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); - return 1; - } - - return 0; -} - -static void __cpuinit twd_calibrate_rate(void) -{ - unsigned long load, count; - u64 waitjiffies; - - /* - * If this is the first time round, we need to work out how fast - * the timer ticks - */ - if (mpcore_timer_rate == 0) { - printk("Calibrating local timer... "); - - /* Wait for a tick to start */ - waitjiffies = get_jiffies_64() + 1; - - while (get_jiffies_64() < waitjiffies) - udelay(10); - - /* OK, now the tick has started, let's get the timer going */ - waitjiffies += 5; - - /* enable, no interrupt or reload */ - __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); - - /* maximum value */ - __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); - - while (get_jiffies_64() < waitjiffies) - udelay(10); - - count = __raw_readl(twd_base + TWD_TIMER_COUNTER); - - mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); - - printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000, - (mpcore_timer_rate / 100000) % 100); - } - - load = mpcore_timer_rate / HZ; - - __raw_writel(load, twd_base + TWD_TIMER_LOAD); -} +#include <asm/smp_twd.h> +#include <asm/localtimer.h> /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - unsigned long flags; - - twd_calibrate_rate(); - - clk->name = "local_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - clk->rating = 350; - clk->set_mode = local_timer_set_mode; - clk->set_next_event = local_timer_set_next_event; - clk->irq = IRQ_LOCALTIMER; - clk->cpumask = cpumask_of(cpu); - clk->shift = 20; - clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift); - clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); - clk->min_delta_ns = clockevent_delta2ns(0xf, clk); - - /* Make sure our local interrupt controller has this enabled */ - local_irq_save(flags); - get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER); - local_irq_restore(flags); - - clockevents_register_device(clk); -} - -/* - * take a local timer down - */ -void __cpuexit local_timer_stop(void) +void __cpuinit local_timer_setup(struct clock_event_device *evt) { - __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); } - -#else /* CONFIG_LOCAL_TIMERS */ - -static void dummy_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ -} - -void __cpuinit local_timer_setup(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - - clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_DUMMY; - clk->rating = 400; - clk->mult = 1; - clk->set_mode = dummy_timer_set_mode; - clk->broadcast = smp_timer_broadcast; - clk->cpumask = cpumask_of(cpu); - - clockevents_register_device(clk); -} - -#endif /* !CONFIG_LOCAL_TIMERS */ diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 30a9c68591f..ac0e83f1cc3 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -19,10 +19,12 @@ #include <asm/cacheflush.h> #include <mach/hardware.h> #include <asm/mach-types.h> +#include <asm/localtimer.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> -#include <mach/scu.h> +#include <mach/board-pbx.h> +#include <asm/smp_scu.h> #include "core.h" @@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void) return __io_address(REALVIEW_EB11MP_SCU_BASE); else if (machine_is_realview_pb11mp()) return __io_address(REALVIEW_TC11MP_SCU_BASE); + else if (machine_is_realview_pbx() && + (core_tile_pbx11mp() || core_tile_pbxa9mp())) + return __io_address(REALVIEW_PBX_TILE_SCU_BASE); else return (void __iomem *)0; } -static unsigned int __init get_core_count(void) +static inline unsigned int get_core_count(void) { - unsigned int ncores; void __iomem *scu_base = scu_base_addr(); - - if (scu_base) { - ncores = __raw_readl(scu_base + SCU_CONFIG); - ncores = (ncores & 0x03) + 1; - } else - ncores = 1; - - return ncores; -} - -/* - * Setup the SCU - */ -static void scu_enable(void) -{ - u32 scu_ctrl; - void __iomem *scu_base = scu_base_addr(); - - scu_ctrl = __raw_readl(scu_base + SCU_CTRL); - scu_ctrl |= 1; - __raw_writel(scu_ctrl, scu_base + SCU_CTRL); + if (scu_base) + return scu_get_core_count(scu_base); + return 1; } static DEFINE_SPINLOCK(boot_lock); @@ -184,7 +170,7 @@ void __init smp_init_cpus(void) unsigned int i, ncores = get_core_count(); for (i = 0; i < ncores; i++) - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -217,19 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; -#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) - /* - * Enable the local timer or broadcast device for the boot CPU. - */ - local_timer_setup(); -#endif - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ for (i = 0; i < max_cpus; i++) - cpu_set(i, cpu_present_map); + set_cpu_present(i, true); /* * Initialise the SCU if there are more than one CPU and let @@ -239,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * WFI */ if (max_cpus > 1) { - scu_enable(); + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + scu_enable(scu_base_addr()); poke_milo(); } } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c20fbef122b..8dfa44e08a9 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,6 +32,7 @@ #include <asm/hardware/gic.h> #include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/localtimer.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a64b84a7a3d..25efe71a67c 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = { /* * RealView PB1176 platform devices */ -static struct resource realview_pb1176_flash_resource = { - .start = REALVIEW_PB1176_FLASH_BASE, - .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, +static struct resource realview_pb1176_flash_resources[] = { + [0] = { + .start = REALVIEW_PB1176_FLASH_BASE, + .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PB1176_SEC_FLASH_BASE, + .end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, }; +#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH +#define PB1176_FLASH_BLOCKS 2 +#else +#define PB1176_FLASH_BLOCKS 1 +#endif static struct resource realview_pb1176_smsc911x_resources[] = { [0] = { @@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void) l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); #endif - realview_flash_register(&realview_pb1176_flash_resource, 1); + realview_flash_register(realview_pb1176_flash_resources, + PB1176_FLASH_BLOCKS); realview_eth_register(NULL, realview_pb1176_smsc911x_resources); platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index ea1e60eca35..dc4b1694390 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,6 +32,7 @@ #include <asm/hardware/gic.h> #include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/localtimer.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c new file mode 100644 index 00000000000..1fe294d0bf9 --- /dev/null +++ b/arch/arm/mach-realview/realview_pbx.c @@ -0,0 +1,335 @@ +/* + * arch/arm/mach-realview/realview_pbx.c + * + * Copyright (C) 2009 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/amba/bus.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> +#include <asm/mach/time.h> + +#include <mach/hardware.h> +#include <mach/board-pbx.h> +#include <mach/irqs.h> + +#include "core.h" + +static struct map_desc realview_pbx_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_PCI + { + .virtual = PCIX_UNIT_BASE, + .pfn = __phys_to_pfn(REALVIEW_PBX_PCI_BASE), + .length = REALVIEW_PBX_PCI_BASE_SIZE, + .type = MT_DEVICE, + }, +#endif +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static struct map_desc realview_local_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + } +}; + +static void __init realview_pbx_map_io(void) +{ + iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc)); + if (core_tile_pbx11mp() || core_tile_pbxa9mp()) + iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc)); +} + +/* + * RealView PBXCore AMBA devices + */ + +#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } +#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } +#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } +#define PBX_SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } +#define PBX_CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } +#define DMAC_DMA { 0, 0 } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } +#define PBX_WATCHDOG_DMA { 0, 0 } +#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } +#define PBX_GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } +#define PBX_RTC_DMA { 0, 0 } +#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } +#define PBX_UART0_DMA { 15, 14 } +#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } +#define PBX_UART1_DMA { 13, 12 } +#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } +#define PBX_UART2_DMA { 11, 10 } +#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } +#define PBX_UART3_DMA { 0x86, 0x87 } +#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } +#define PBX_SSP_DMA { 9, 8 } + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", PBX_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", PBX_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", PBX_SSP, NULL); + +/* Primecells on the NEC ISSP chip */ +AMBA_DEVICE(clcd, "issp:20", PBX_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +/* + * RealView PB-X platform devices + */ +static struct resource realview_pbx_flash_resources[] = { + [0] = { + .start = REALVIEW_PBX_FLASH0_BASE, + .end = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PBX_FLASH1_BASE, + .end = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource realview_pbx_smsc911x_resources[] = { + [0] = { + .start = REALVIEW_PBX_ETH_BASE, + .end = REALVIEW_PBX_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PBX_ETH, + .end = IRQ_PBX_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource realview_pbx_isp1761_resources[] = { + [0] = { + .start = REALVIEW_PBX_USB_BASE, + .end = REALVIEW_PBX_USB_BASE + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PBX_USB, + .end = IRQ_PBX_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static void __init gic_init_irq(void) +{ + /* ARM PBX on-board GIC */ + if (core_tile_pbx11mp() || core_tile_pbxa9mp()) { + gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE), + 29); + gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE)); + } else { + gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE), + IRQ_PBX_GIC_START); + gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE)); + } +} + +static void __init realview_pbx_timer_init(void) +{ + timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20; + +#ifdef CONFIG_LOCAL_TIMERS + if (core_tile_pbx11mp() || core_tile_pbxa9mp()) + twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE); +#endif + realview_timer_init(IRQ_PBX_TIMER0_1); +} + +static struct sys_timer realview_pbx_timer = { + .init = realview_pbx_timer_init, +}; + +static void __init realview_pbx_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + if (core_tile_pbxa9mp()) { + void __iomem *l2x0_base = + __io_address(REALVIEW_PBX_TILE_L220_BASE); + + /* set RAM latencies to 1 cycle for eASIC */ + writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); + + /* 16KB way size, 8-way associativity, parity disabled + * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ + l2x0_init(l2x0_base, 0x02520000, 0xc0000fff); + } +#endif + + realview_flash_register(realview_pbx_flash_resources, + ARRAY_SIZE(realview_pbx_flash_resources)); + realview_eth_register(NULL, realview_pbx_smsc911x_resources); + platform_device_register(&realview_i2c_device); + platform_device_register(&realview_cf_device); + realview_usb_register(realview_pbx_isp1761_resources); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_io = REALVIEW_PBX_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = realview_pbx_map_io, + .init_irq = gic_init_irq, + .timer = &realview_pbx_timer, + .init_machine = realview_pbx_init, +MACHINE_END |