diff options
Diffstat (limited to 'arch/arm/mach-s3c2410/cpu.c')
| -rw-r--r-- | arch/arm/mach-s3c2410/cpu.c | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c new file mode 100644 index 00000000000..ca366e9e264 --- /dev/null +++ b/arch/arm/mach-s3c2410/cpu.c @@ -0,0 +1,241 @@ +/* linux/arch/arm/mach-s3c2410/cpu.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/delay.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/regs-gpio.h> + +#include "cpu.h" +#include "clock.h" +#include "s3c2410.h" +#include "s3c2440.h" + +struct cpu_table { + unsigned long idcode; + unsigned long idmask; + void (*map_io)(struct map_desc *mach_desc, int size); + void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no); + void (*init_clocks)(int xtal); + int (*init)(void); + const char *name; +}; + +/* table of supported CPUs */ + +static const char name_s3c2410[] = "S3C2410"; +static const char name_s3c2440[] = "S3C2440"; +static const char name_s3c2410a[] = "S3C2410A"; +static const char name_s3c2440a[] = "S3C2440A"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = 0x32410000, + .idmask = 0xffffffff, + .map_io = s3c2410_map_io, + .init_clocks = s3c2410_init_clocks, + .init_uarts = s3c2410_init_uarts, + .init = s3c2410_init, + .name = name_s3c2410 + }, + { + .idcode = 0x32410002, + .idmask = 0xffffffff, + .map_io = s3c2410_map_io, + .init_clocks = s3c2410_init_clocks, + .init_uarts = s3c2410_init_uarts, + .init = s3c2410_init, + .name = name_s3c2410a + }, + { + .idcode = 0x32440000, + .idmask = 0xffffffff, + .map_io = s3c2440_map_io, + .init_clocks = s3c2440_init_clocks, + .init_uarts = s3c2440_init_uarts, + .init = s3c2440_init, + .name = name_s3c2440 + }, + { + .idcode = 0x32440001, + .idmask = 0xffffffff, + .map_io = s3c2440_map_io, + .init_clocks = s3c2440_init_clocks, + .init_uarts = s3c2440_init_uarts, + .init = s3c2440_init, + .name = name_s3c2440a + } +}; + +/* minimal IO mapping */ + +static struct map_desc s3c_iodesc[] __initdata = { + IODESC_ENT(GPIO), + IODESC_ENT(IRQ), + IODESC_ENT(MEMCTRL), + IODESC_ENT(UART) +}; + + +static struct cpu_table * +s3c_lookup_cpu(unsigned long idcode) +{ + struct cpu_table *tab; + int count; + + tab = cpu_ids; + for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) { + if ((idcode & tab->idmask) == tab->idcode) + return tab; + } + + return NULL; +} + +/* board information */ + +static struct s3c24xx_board *board; + +void s3c24xx_set_board(struct s3c24xx_board *b) +{ + int i; + + board = b; + + if (b->clocks_count != 0) { + struct clk **ptr = b->clocks;; + + for (i = b->clocks_count; i > 0; i--, ptr++) + s3c24xx_register_clock(*ptr); + } +} + +/* cpu information */ + +static struct cpu_table *cpu; + +void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) +{ + unsigned long idcode; + + /* initialise the io descriptors we need for initialisation */ + iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); + + idcode = __raw_readl(S3C2410_GSTATUS1); + cpu = s3c_lookup_cpu(idcode); + + if (cpu == NULL) { + printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); + panic("Unknown S3C24XX CPU"); + } + + if (cpu->map_io == NULL || cpu->init == NULL) { + printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); + panic("Unsupported S3C24XX CPU"); + } + + printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); + + (cpu->map_io)(mach_desc, size); +} + +/* s3c24xx_init_clocks + * + * Initialise the clock subsystem and associated information from the + * given master crystal value. + * + * xtal = 0 -> use default PLL crystal value (normally 12MHz) + * != 0 -> PLL crystal value in Hz +*/ + +void __init s3c24xx_init_clocks(int xtal) +{ + if (xtal == 0) + xtal = 12*1000*1000; + + if (cpu == NULL) + panic("s3c24xx_init_clocks: no cpu setup?\n"); + + if (cpu->init_clocks == NULL) + panic("s3c24xx_init_clocks: cpu has no clock init\n"); + else + (cpu->init_clocks)(xtal); +} + +void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + if (cpu == NULL) + return; + + if (cpu->init_uarts == NULL) { + printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); + } else + (cpu->init_uarts)(cfg, no); +} + +static int __init s3c_arch_init(void) +{ + int ret; + + // do the correct init for cpu + + if (cpu == NULL) + panic("s3c_arch_init: NULL cpu\n"); + + ret = (cpu->init)(); + if (ret != 0) + return ret; + + if (board != NULL) { + struct platform_device **ptr = board->devices; + int i; + + for (i = 0; i < board->devices_count; i++, ptr++) { + ret = platform_device_register(*ptr); + + if (ret) { + printk(KERN_ERR "s3c24xx: failed to add board device %s (%d) @%p\n", (*ptr)->name, ret, *ptr); + } + } + + /* mask any error, we may not need all these board + * devices */ + ret = 0; + } + + return ret; +} + +arch_initcall(s3c_arch_init); |