summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2410/pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2410/pm.c')
-rw-r--r--arch/arm/mach-s3c2410/pm.c72
1 files changed, 27 insertions, 45 deletions
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index a589fe76d91..b49a0b3b72b 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -1,9 +1,9 @@
/* linux/arch/arm/mach-s3c2410/pm.c
*
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 Power Manager (Suspend-To-RAM) support
+ * S3C24XX Power Manager (Suspend-To-RAM) support
*
* See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
*
@@ -24,9 +24,6 @@
* Parts based on arch/arm/mach-pxa/pm.c
*
* Thanks to Dimitry Andric for debugging
- *
- * Modifications:
- * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART
*/
#include <linux/init.h>
@@ -38,6 +35,7 @@
#include <linux/ioport.h>
#include <linux/delay.h>
+#include <asm/cacheflush.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -55,14 +53,6 @@
unsigned long s3c_pm_flags;
-/* cache functions from arch/arm/mm/proc-arm920.S */
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-extern void arm920_flush_kern_cache_all(void);
-#else
-static void arm920_flush_kern_cache_all(void) { }
-#endif
-
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
@@ -92,19 +82,6 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_REFRESH),
};
-/* this lot should be really saved by the IRQ code */
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2410_EXTINT0),
- SAVE_ITEM(S3C2410_EXTINT1),
- SAVE_ITEM(S3C2410_EXTINT2),
- SAVE_ITEM(S3C2410_EINFLT0),
- SAVE_ITEM(S3C2410_EINFLT1),
- SAVE_ITEM(S3C2410_EINFLT2),
- SAVE_ITEM(S3C2410_EINFLT3),
- SAVE_ITEM(S3C2410_EINTMASK),
- SAVE_ITEM(S3C2410_INTMSK)
-};
-
static struct sleep_save gpio_save[] = {
SAVE_ITEM(S3C2410_GPACON),
SAVE_ITEM(S3C2410_GPADAT),
@@ -165,7 +142,7 @@ static struct sleep_save uart_save[] = {
extern void printascii(const char *);
-static void pm_dbg(const char *fmt, ...)
+void pm_dbg(const char *fmt, ...)
{
va_list va;
char buff[256];
@@ -509,6 +486,9 @@ static void s3c2410_pm_configure_extint(void)
}
}
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
/* s3c2410_pm_enter
@@ -519,7 +499,6 @@ static void s3c2410_pm_configure_extint(void)
static int s3c2410_pm_enter(suspend_state_t state)
{
unsigned long regs_save[16];
- unsigned long tmp;
/* ensure the debug is initialised (if enabled) */
@@ -527,6 +506,11 @@ static int s3c2410_pm_enter(suspend_state_t state)
DBG("s3c2410_pm_enter(%d)\n", state);
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+ return -EINVAL;
+ }
+
if (state != PM_SUSPEND_MEM) {
printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
return -EINVAL;
@@ -554,17 +538,9 @@ static int s3c2410_pm_enter(suspend_state_t state)
DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
- /* ensure at least GESTATUS3 has the resume address */
-
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
/* save all necessary core registers not covered by the drivers */
s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
@@ -581,10 +557,16 @@ static int s3c2410_pm_enter(suspend_state_t state)
/* ack any outstanding external interrupts before we go to sleep */
__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+ __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+ /* call cpu specific preperation */
+
+ pm_cpu_prep();
/* flush cache back to ram */
- arm920_flush_kern_cache_all();
+ flush_cache_all();
s3c2410_pm_check_store();
@@ -592,23 +574,23 @@ static int s3c2410_pm_enter(suspend_state_t state)
__raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
- s3c2410_cpu_suspend(regs_save);
+ /* s3c2410_cpu_save will also act as our return point from when
+ * we resume as it saves its own register state, so use the return
+ * code to differentiate return from save and return from sleep */
+
+ if (s3c2410_cpu_save(regs_save) == 0) {
+ flush_cache_all();
+ pm_cpu_sleep();
+ }
/* restore the cpu state */
cpu_init();
- /* unset the return-from-sleep flag, to ensure reset */
-
- tmp = __raw_readl(S3C2410_GSTATUS2);
- tmp &= S3C2410_GSTATUS2_OFFRESET;
- __raw_writel(tmp, S3C2410_GSTATUS2);
-
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
s3c2410_pm_debug_init();