diff options
Diffstat (limited to 'arch/arm/mach-s3c2410')
| -rw-r--r-- | arch/arm/mach-s3c2410/h1940-bluetooth.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/pm-core.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 241 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/regs-mem.h | 28 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 28 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-qt2410.c | 34 |
7 files changed, 11 insertions, 330 deletions
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 2c126bbca08..a5eeb62ce1c 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -18,7 +18,6 @@ #include <linux/leds.h> #include <linux/gpio.h> #include <linux/rfkill.h> -#include <linux/leds.h> #include <mach/regs-gpio.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index f453c4f2cb8..bab13920176 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -52,12 +52,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); extern int s3c2410_gpio_getirq(unsigned int pin); -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_gpio_getirq(unsigned int pin); - -#endif /* CONFIG_CPU_S3C2400 */ - /* s3c2410_gpio_irqfilter * * set the irq filtering on the given pin diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index 70a83b209e2..45eea5210c8 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -62,3 +62,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) { } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void s3c_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index a0a89d42929..cac1ad6b582 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -16,11 +16,7 @@ #include <mach/gpio-nrs.h> -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_MISCCR S3C2400_MISCCR -#else #define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) -#endif /* CONFIG_CPU_S3C2400 */ /* general configuration options */ @@ -42,67 +38,33 @@ /* configure GPIO ports A..G */ /* port A - S3C2410: 22bits, zero in bit X makes pin X output - * S3C2400: 18bits, zero in bit X makes pin X output * 1 makes port special function, this is default */ #define S3C2410_GPACON S3C2410_GPIOREG(0x00) #define S3C2410_GPADAT S3C2410_GPIOREG(0x04) -#define S3C2400_GPACON S3C2410_GPIOREG(0x00) -#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) - #define S3C2410_GPA0_ADDR0 (1<<0) - #define S3C2410_GPA1_ADDR16 (1<<1) - #define S3C2410_GPA2_ADDR17 (1<<2) - #define S3C2410_GPA3_ADDR18 (1<<3) - #define S3C2410_GPA4_ADDR19 (1<<4) - #define S3C2410_GPA5_ADDR20 (1<<5) - #define S3C2410_GPA6_ADDR21 (1<<6) - #define S3C2410_GPA7_ADDR22 (1<<7) - #define S3C2410_GPA8_ADDR23 (1<<8) - #define S3C2410_GPA9_ADDR24 (1<<9) - #define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2400_GPA10_SCKE (1<<10) - #define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2400_GPA11_nCAS0 (1<<11) - #define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2400_GPA12_nCAS1 (1<<12) - #define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2400_GPA13_nGCS1 (1<<13) - #define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2400_GPA14_nGCS2 (1<<14) - #define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2400_GPA15_nGCS3 (1<<15) - #define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2400_GPA16_nGCS4 (1<<16) - #define S3C2410_GPA17_CLE (1<<17) -#define S3C2400_GPA17_nGCS5 (1<<17) - #define S3C2410_GPA18_ALE (1<<18) - #define S3C2410_GPA19_nFWE (1<<19) - #define S3C2410_GPA20_nFRE (1<<20) - #define S3C2410_GPA21_nRSTOUT (1<<21) - #define S3C2410_GPA22_nFCE (1<<22) /* 0x08 and 0x0c are reserved on S3C2410 */ @@ -111,10 +73,6 @@ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. * 00 = input, 01 = output, 10=special function, 11=reserved - * S3C2400: - * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=data, 11=special function - * bit 0,1 = pin 0, 2,3= pin 1... * * CPBUP = pull up resistor control, 1=disabled, 0=enabled @@ -124,78 +82,35 @@ #define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) #define S3C2410_GPBUP S3C2410_GPIOREG(0x18) -#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) -#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) -#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) - /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ #define S3C2410_GPB0_TOUT0 (0x02 << 0) -#define S3C2400_GPB0_DATA16 (0x02 << 0) #define S3C2410_GPB1_TOUT1 (0x02 << 2) -#define S3C2400_GPB1_DATA17 (0x02 << 2) #define S3C2410_GPB2_TOUT2 (0x02 << 4) -#define S3C2400_GPB2_DATA18 (0x02 << 4) -#define S3C2400_GPB2_TCLK1 (0x03 << 4) #define S3C2410_GPB3_TOUT3 (0x02 << 6) -#define S3C2400_GPB3_DATA19 (0x02 << 6) -#define S3C2400_GPB3_TXD1 (0x03 << 6) #define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2400_GPB4_DATA20 (0x02 << 8) #define S3C2410_GPB4_MASK (0x03 << 8) -#define S3C2400_GPB4_RXD1 (0x03 << 8) -#define S3C2400_GPB4_MASK (0x03 << 8) #define S3C2410_GPB5_nXBACK (0x02 << 10) #define S3C2443_GPB5_XBACK (0x03 << 10) -#define S3C2400_GPB5_DATA21 (0x02 << 10) -#define S3C2400_GPB5_nCTS1 (0x03 << 10) #define S3C2410_GPB6_nXBREQ (0x02 << 12) #define S3C2443_GPB6_XBREQ (0x03 << 12) -#define S3C2400_GPB6_DATA22 (0x02 << 12) -#define S3C2400_GPB6_nRTS1 (0x03 << 12) #define S3C2410_GPB7_nXDACK1 (0x02 << 14) #define S3C2443_GPB7_XDACK1 (0x03 << 14) -#define S3C2400_GPB7_DATA23 (0x02 << 14) #define S3C2410_GPB8_nXDREQ1 (0x02 << 16) -#define S3C2400_GPB8_DATA24 (0x02 << 16) #define S3C2410_GPB9_nXDACK0 (0x02 << 18) #define S3C2443_GPB9_XDACK0 (0x03 << 18) -#define S3C2400_GPB9_DATA25 (0x02 << 18) -#define S3C2400_GPB9_I2SSDI (0x03 << 18) #define S3C2410_GPB10_nXDRE0 (0x02 << 20) #define S3C2443_GPB10_XDREQ0 (0x03 << 20) -#define S3C2400_GPB10_DATA26 (0x02 << 20) -#define S3C2400_GPB10_nSS (0x03 << 20) - -#define S3C2400_GPB11_INP (0x00 << 22) -#define S3C2400_GPB11_OUTP (0x01 << 22) -#define S3C2400_GPB11_DATA27 (0x02 << 22) - -#define S3C2400_GPB12_INP (0x00 << 24) -#define S3C2400_GPB12_OUTP (0x01 << 24) -#define S3C2400_GPB12_DATA28 (0x02 << 24) - -#define S3C2400_GPB13_INP (0x00 << 26) -#define S3C2400_GPB13_OUTP (0x01 << 26) -#define S3C2400_GPB13_DATA29 (0x02 << 26) - -#define S3C2400_GPB14_INP (0x00 << 28) -#define S3C2400_GPB14_OUTP (0x01 << 28) -#define S3C2400_GPB14_DATA30 (0x02 << 28) - -#define S3C2400_GPB15_INP (0x00 << 30) -#define S3C2400_GPB15_OUTP (0x01 << 30) -#define S3C2400_GPB15_DATA31 (0x02 << 30) #define S3C2410_GPB_PUPDIS(x) (1<<(x)) @@ -208,59 +123,22 @@ #define S3C2410_GPCCON S3C2410_GPIOREG(0x20) #define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) #define S3C2410_GPCUP S3C2410_GPIOREG(0x28) - -#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) -#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) -#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) - #define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2400_GPC0_VD0 (0x02 << 0) - #define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2400_GPC1_VD1 (0x02 << 2) - #define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2400_GPC2_VD2 (0x02 << 4) - #define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2400_GPC3_VD3 (0x02 << 6) - #define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2400_GPC4_VD4 (0x02 << 8) - #define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2400_GPC5_VD5 (0x02 << 10) - #define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2400_GPC6_VD6 (0x02 << 12) - #define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2400_GPC7_VD7 (0x02 << 14) - #define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2400_GPC8_VD8 (0x02 << 16) - #define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2400_GPC9_VD9 (0x02 << 18) - #define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2400_GPC10_VD10 (0x02 << 20) - #define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2400_GPC11_VD11 (0x02 << 22) - #define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2400_GPC12_VD12 (0x02 << 24) - #define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2400_GPC13_VD13 (0x02 << 26) - #define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2400_GPC14_VD14 (0x02 << 28) - #define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2400_GPC15_VD15 (0x02 << 30) - #define S3C2410_GPC_PUPDIS(x) (1<<(x)) /* @@ -269,8 +147,6 @@ * almost identical setup to port b, but the special functions are mostly * to do with the video system's data. * - * S3C2400: Port D consists of 11 GPIO/Special function - * * almost identical setup to port c */ @@ -278,46 +154,31 @@ #define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) #define S3C2410_GPDUP S3C2410_GPIOREG(0x38) -#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) -#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) -#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) - #define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2400_GPD0_VFRAME (0x02 << 0) #define S3C2442_GPD0_nSPICS1 (0x03 << 0) #define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2400_GPD1_VM (0x02 << 2) #define S3C2442_GPD1_SPICLK1 (0x03 << 2) #define S3C2410_GPD2_VD10 (0x02 << 4) -#define S3C2400_GPD2_VLINE (0x02 << 4) #define S3C2410_GPD3_VD11 (0x02 << 6) -#define S3C2400_GPD3_VCLK (0x02 << 6) #define S3C2410_GPD4_VD12 (0x02 << 8) -#define S3C2400_GPD4_LEND (0x02 << 8) #define S3C2410_GPD5_VD13 (0x02 << 10) -#define S3C2400_GPD5_TOUT0 (0x02 << 10) #define S3C2410_GPD6_VD14 (0x02 << 12) -#define S3C2400_GPD6_TOUT1 (0x02 << 12) #define S3C2410_GPD7_VD15 (0x02 << 14) -#define S3C2400_GPD7_TOUT2 (0x02 << 14) #define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2400_GPD8_TOUT3 (0x02 << 16) #define S3C2440_GPD8_SPIMISO1 (0x03 << 16) #define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2400_GPD9_TCLK0 (0x02 << 18) #define S3C2440_GPD9_SPIMOSI1 (0x03 << 18) #define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2400_GPD10_nWAIT (0x02 << 20) #define S3C2440_GPD10_SPICLK1 (0x03 << 20) #define S3C2410_GPD11_VD19 (0x02 << 22) @@ -340,9 +201,6 @@ * again, the same as port B, but dealing with I2S, SDI, and * more miscellaneous functions * - * S3C2400: - * Port E consists of 12 GPIO/Special function - * * GPIO / interrupt inputs */ @@ -350,74 +208,51 @@ #define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) #define S3C2410_GPEUP S3C2410_GPIOREG(0x48) -#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) -#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) -#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) - #define S3C2410_GPE0_I2SLRCK (0x02 << 0) #define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2400_GPE0_EINT0 (0x02 << 0) #define S3C2410_GPE0_MASK (0x03 << 0) #define S3C2410_GPE1_I2SSCLK (0x02 << 2) #define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2400_GPE1_EINT1 (0x02 << 2) -#define S3C2400_GPE1_nSS (0x03 << 2) #define S3C2410_GPE1_MASK (0x03 << 2) #define S3C2410_GPE2_CDCLK (0x02 << 4) #define S3C2443_GPE2_AC_BITCLK (0x03 << 4) -#define S3C2400_GPE2_EINT2 (0x02 << 4) -#define S3C2400_GPE2_I2SSDI (0x03 << 4) #define S3C2410_GPE3_I2SSDI (0x02 << 6) #define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2400_GPE3_EINT3 (0x02 << 6) -#define S3C2400_GPE3_nCTS1 (0x03 << 6) #define S3C2410_GPE3_nSS0 (0x03 << 6) #define S3C2410_GPE3_MASK (0x03 << 6) #define S3C2410_GPE4_I2SSDO (0x02 << 8) #define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2400_GPE4_EINT4 (0x02 << 8) -#define S3C2400_GPE4_nRTS1 (0x03 << 8) #define S3C2410_GPE4_I2SSDI (0x03 << 8) #define S3C2410_GPE4_MASK (0x03 << 8) #define S3C2410_GPE5_SDCLK (0x02 << 10) #define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2400_GPE5_EINT5 (0x02 << 10) -#define S3C2400_GPE5_TCLK1 (0x03 << 10) #define S3C2443_GPE5_AC_BITCLK (0x03 << 10) #define S3C2410_GPE6_SDCMD (0x02 << 12) #define S3C2443_GPE6_SD1_CMD (0x02 << 12) #define S3C2443_GPE6_AC_SDI (0x03 << 12) -#define S3C2400_GPE6_EINT6 (0x02 << 12) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) #define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) #define S3C2443_GPE7_AC_SDO (0x03 << 14) -#define S3C2400_GPE7_EINT7 (0x02 << 14) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) #define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) #define S3C2443_GPE8_AC_SYNC (0x03 << 16) -#define S3C2400_GPE8_nXDACK0 (0x02 << 16) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) #define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) #define S3C2443_GPE9_AC_nRESET (0x03 << 18) -#define S3C2400_GPE9_nXDACK1 (0x02 << 18) -#define S3C2400_GPE9_nXBACK (0x03 << 18) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) -#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) #define S3C2410_GPE11_SPIMISO0 (0x02 << 22) -#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) -#define S3C2400_GPE11_nXBREQ (0x03 << 22) #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) @@ -447,9 +282,6 @@ * * pull up works like all other ports. * - * S3C2400: - * Port F consists of 7 GPIO/Special function - * * GPIO/serial/misc pins */ @@ -457,37 +289,14 @@ #define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) #define S3C2410_GPFUP S3C2410_GPIOREG(0x58) -#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) -#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) -#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) - #define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2400_GPF0_RXD0 (0x02 << 0) - #define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2400_GPF1_RXD1 (0x02 << 2) -#define S3C2400_GPF1_IICSDA (0x03 << 2) - #define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2400_GPF2_TXD0 (0x02 << 4) - #define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2400_GPF3_TXD1 (0x02 << 6) -#define S3C2400_GPF3_IICSCL (0x03 << 6) - #define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2400_GPF4_nRTS0 (0x02 << 8) -#define S3C2400_GPF4_nXBACK (0x03 << 8) - #define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2400_GPF5_nCTS0 (0x02 << 10) -#define S3C2400_GPF5_nXBREQ (0x03 << 10) - #define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2400_GPF6_CLKOUT (0x02 << 12) - #define S3C2410_GPF7_EINT7 (0x02 << 14) - #define S3C2410_GPF_PUPDIS(x) (1<<(x)) /* S3C2410: @@ -497,62 +306,38 @@ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. - * - * S3C2400: - * Port G consists of 10 GPIO/Special function */ #define S3C2410_GPGCON S3C2410_GPIOREG(0x60) #define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) #define S3C2410_GPGUP S3C2410_GPIOREG(0x68) -#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) -#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) -#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) - #define S3C2410_GPG0_EINT8 (0x02 << 0) -#define S3C2400_GPG0_I2SLRCK (0x02 << 0) #define S3C2410_GPG1_EINT9 (0x02 << 2) -#define S3C2400_GPG1_I2SSCLK (0x02 << 2) #define S3C2410_GPG2_EINT10 (0x02 << 4) #define S3C2410_GPG2_nSS0 (0x03 << 4) -#define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3_EINT11 (0x02 << 6) #define S3C2410_GPG3_nSS1 (0x03 << 6) -#define S3C2400_GPG3_I2SSDO (0x02 << 6) -#define S3C2400_GPG3_I2SSDI (0x03 << 6) #define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2400_GPG4_MMCCLK (0x02 << 8) -#define S3C2400_GPG4_I2SSDI (0x03 << 8) #define S3C2410_GPG4_LCDPWREN (0x03 << 8) #define S3C2443_GPG4_LCDPWRDN (0x03 << 8) #define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2400_GPG5_MMCCMD (0x02 << 10) -#define S3C2400_GPG5_IICSDA (0x03 << 10) #define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ #define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2400_GPG6_MMCDAT (0x02 << 12) -#define S3C2400_GPG6_IICSCL (0x03 << 12) #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) #define S3C2410_GPG7_EINT15 (0x02 << 14) #define S3C2410_GPG7_SPICLK1 (0x03 << 14) -#define S3C2400_GPG7_SPIMISO (0x02 << 14) -#define S3C2400_GPG7_IICSDA (0x03 << 14) #define S3C2410_GPG8_EINT16 (0x02 << 16) -#define S3C2400_GPG8_SPIMOSI (0x02 << 16) -#define S3C2400_GPG8_IICSCL (0x03 << 16) #define S3C2410_GPG9_EINT17 (0x02 << 18) -#define S3C2400_GPG9_SPICLK (0x02 << 18) -#define S3C2400_GPG9_MMCCLK (0x03 << 18) #define S3C2410_GPG10_EINT18 (0x02 << 20) @@ -660,7 +445,6 @@ #define S3C2443_GPMUP S3C2410_GPIOREG(0x108) /* miscellaneous control */ -#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) @@ -674,14 +458,6 @@ #define S3C2410_MISCCR_SPUCR_LEN (0<<1) #define S3C2410_MISCCR_SPUCR_LDIS (1<<1) -#define S3C2400_MISCCR_SPUCR_LEN (0<<0) -#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) -#define S3C2400_MISCCR_SPUCR_HEN (0<<1) -#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) - -#define S3C2400_MISCCR_HZ_STOPEN (0<<2) -#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) - #define S3C2410_MISCCR_USBDEV (0<<3) #define S3C2410_MISCCR_USBHOST (1<<3) @@ -728,7 +504,6 @@ * * Samsung datasheet p9-25 */ -#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) #define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) @@ -796,22 +571,6 @@ #define S3C2410_GSTATUS2_OFFRESET (1<<1) #define S3C2410_GSTATUS2_PONRESET (1<<0) -/* open drain control register */ -#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) - -#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) -#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) -#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) -#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) -#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) -#define S3C2400_OPENCR_OPC_CMDEN (1<<2) -#define S3C2400_OPENCR_OPC_DATDIS (0<<3) -#define S3C2400_OPENCR_OPC_DATEN (1<<3) -#define S3C2400_OPENCR_OPC_MISODIS (0<<4) -#define S3C2400_OPENCR_OPC_MISOEN (1<<4) -#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) -#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) - /* 2412/2413 sleep configuration registers */ #define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 988a6863e54..e0c67b0163d 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -145,29 +145,8 @@ #define S3C2410_BANKCON_Tacs_SHIFT (13) #define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2400_BANKCON_EDODRAM (0x2 << 15) #define S3C2410_BANKCON_SDRAM (0x3 << 15) -/* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) - -/* CAS pulse width */ -#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) -#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) - -/* CAS pre-charge */ -#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) -#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) - -/* control column address select */ -#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) -#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) -#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) -#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) - /* next bits only for SDRAM in 6,7 */ #define S3C2410_BANKCON_Trcd2 (0x00 << 2) #define S3C2410_BANKCON_Trcd3 (0x01 << 2) @@ -194,12 +173,6 @@ #define S3C2410_REFRESH_TRP_3clk (1<<20) #define S3C2410_REFRESH_TRP_4clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20) -#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20) -#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20) -#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20) - #define S3C2410_REFRESH_TSRC_MASK (3<<18) #define S3C2410_REFRESH_TSRC_4clk (0<<18) #define S3C2410_REFRESH_TSRC_5clk (1<<18) @@ -222,7 +195,6 @@ #define S3C2410_BANKSIZE_4M (0x5 << 0) #define S3C2410_BANKSIZE_2M (0x4 << 0) #define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2400_BANKSIZE_MASK (0x4 << 0) #define S3C2410_BANKSIZE_SCLK_EN (1<<4) #define S3C2410_BANKSIZE_SCKE_EN (1<<5) #define S3C2410_BANKSIZE_BURST (1<<7) diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h deleted file mode 100644 index dcef2287cb3..00000000000 --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPIGPIO_H -#define __ASM_ARCH_SPIGPIO_H __FILE__ - -struct s3c2410_spigpio_info { - unsigned long pin_clk; - unsigned long pin_mosi; - unsigned long pin_miso; - - int num_chipselect; - int bus_num; - - void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -}; - - -#endif /* __ASM_ARCH_SPIGPIO_H */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index e8f49feef28..f44f77531b1 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -32,7 +32,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> +#include <linux/spi/spi_gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -53,8 +53,6 @@ #include <mach/fb.h> #include <plat/nand.h> #include <plat/udc.h> -#include <mach/spi.h> -#include <mach/spi-gpio.h> #include <plat/iic.h> #include <plat/common-smdk.h> @@ -216,32 +214,16 @@ static struct platform_device qt2410_led = { /* SPI */ -static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) -{ - switch (cs) { - case BITBANG_CS_ACTIVE: - gpio_set_value(S3C2410_GPB(5), 0); - break; - case BITBANG_CS_INACTIVE: - gpio_set_value(S3C2410_GPB(5), 1); - break; - } -} - -static struct s3c2410_spigpio_info spi_gpio_cfg = { - .pin_clk = S3C2410_GPG(7), - .pin_mosi = S3C2410_GPG(6), - .pin_miso = S3C2410_GPG(5), - .chip_select = &spi_gpio_cs, +static struct spi_gpio_platform_data spi_gpio_cfg = { + .sck = S3C2410_GPG(7), + .mosi = S3C2410_GPG(6), + .miso = S3C2410_GPG(5), }; - static struct platform_device qt2410_spi = { - .name = "s3c24xx-spi-gpio", - .id = 1, - .dev = { - .platform_data = &spi_gpio_cfg, - }, + .name = "spi-gpio", + .id = 1, + .dev.platform_data = &spi_gpio_cfg, }; /* Board devices */ |