summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2410
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2410')
-rw-r--r--arch/arm/mach-s3c2410/Kconfig15
-rw-r--r--arch/arm/mach-s3c2410/Makefile5
-rw-r--r--arch/arm/mach-s3c2410/bast-irq.c77
-rw-r--r--arch/arm/mach-s3c2410/devs.c11
-rw-r--r--arch/arm/mach-s3c2410/irq.c22
-rw-r--r--arch/arm/mach-s3c2410/mach-anubis.c270
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c51
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c30
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c2
-rw-r--r--arch/arm/mach-s3c2410/pm-simtec.c2
-rw-r--r--arch/arm/mach-s3c2410/pm.c6
-rw-r--r--arch/arm/mach-s3c2410/s3c2440-irq.c8
-rw-r--r--arch/arm/mach-s3c2410/time.c2
14 files changed, 443 insertions, 60 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index d4d03d0daae..06807c6ee68 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,6 +2,13 @@ if ARCH_S3C2410
menu "S3C24XX Implementations"
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select CPU_S3C2440
+ help
+ Say Y gere if you are using the Simtec Electronics ANUBIS
+ development system
+
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
@@ -11,6 +18,14 @@ config ARCH_BAST
Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
+config BAST_PC104_IRQ
+ bool "BAST PC104 IRQ support"
+ depends on ARCH_BAST
+ default y
+ help
+ Say Y here to enable the PC104 IRQ routing on the
+ Simtec BAST (EB2410ITX)
+
config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 55ed7c7e57d..b4f1e051c76 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -26,8 +26,13 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
+# bast extras
+
+obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
+
# machine specific support
+obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 5e5bbe893cb..fbbeb055300 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/bast-irq.c
*
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2003,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@@ -21,7 +21,8 @@
*
* Modifications:
* 08-Jan-2003 BJD Moved from central IRQ code
- */
+ * 21-Aug-2005 BJD Fixed missing code and compile errors
+*/
#include <linux/init.h>
@@ -30,12 +31,19 @@
#include <linux/ptrace.h>
#include <linux/sysdev.h>
+#include <asm/mach-types.h>
+
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
-#include <asm/hardware/s3c2410/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-irq.h>
+
+#include "irq.h"
#if 0
#include <asm/debug-ll.h>
@@ -79,15 +87,15 @@ bast_pc104_mask(unsigned int irqno)
temp = __raw_readb(BAST_VA_PC104_IRQMASK);
temp &= ~bast_pc104_irqmasks[irqno];
__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-
- if (temp == 0)
- bast_extint_mask(IRQ_ISA);
}
static void
-bast_pc104_ack(unsigned int irqno)
+bast_pc104_maskack(unsigned int irqno)
{
- bast_extint_ack(IRQ_ISA);
+ struct irqdesc *desc = irq_desc + IRQ_ISA;
+
+ bast_pc104_mask(irqno);
+ desc->chip->ack(IRQ_ISA);
}
static void
@@ -98,14 +106,12 @@ bast_pc104_unmask(unsigned int irqno)
temp = __raw_readb(BAST_VA_PC104_IRQMASK);
temp |= bast_pc104_irqmasks[irqno];
__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-
- bast_extint_unmask(IRQ_ISA);
}
-static struct bast_pc104_chip = {
+static struct irqchip bast_pc104_chip = {
.mask = bast_pc104_mask,
.unmask = bast_pc104_unmask,
- .ack = bast_pc104_ack
+ .ack = bast_pc104_maskack
};
static void
@@ -119,14 +125,49 @@ bast_irq_pc104_demux(unsigned int irq,
stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
- for (i = 0; i < 4 && stat != 0; i++) {
- if (stat & 1) {
- irqno = bast_pc104_irqs[i];
- desc = irq_desc + irqno;
+ if (unlikely(stat == 0)) {
+ /* ack if we get an irq with nothing (ie, startup) */
+
+ desc = irq_desc + IRQ_ISA;
+ desc->chip->ack(IRQ_ISA);
+ } else {
+ /* handle the IRQ */
+
+ for (i = 0; stat != 0; i++, stat >>= 1) {
+ if (stat & 1) {
+ irqno = bast_pc104_irqs[i];
- desc->handle(irqno, desc, regs);
+ desc_handle_irq(irqno, irq_desc + irqno, regs);
+ }
}
+ }
+}
- stat >>= 1;
+static __init int bast_irq_init(void)
+{
+ unsigned int i;
+
+ if (machine_is_bast()) {
+ printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+
+ /* zap all the IRQs */
+
+ __raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
+
+ set_irq_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
+
+ /* reigster our IRQs */
+
+ for (i = 0; i < 4; i++) {
+ unsigned int irqno = bast_pc104_irqs[i];
+
+ set_irq_chip(irqno, &bast_pc104_chip);
+ set_irq_handler(irqno, do_level_IRQ);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
}
+
+ return 0;
}
+
+arch_initcall(bast_irq_init);
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 4664bd11adc..0077937a7ab 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -29,7 +29,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-
+#include <asm/arch/fb.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -103,6 +103,15 @@ struct platform_device s3c_device_lcd = {
EXPORT_SYMBOL(s3c_device_lcd);
+static struct s3c2410fb_mach_info s3c2410fb_info;
+
+void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info)
+{
+ memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info));
+ s3c_device_lcd.dev.platform_data = &s3c2410fb_info;
+}
+EXPORT_SYMBOL(set_s3c2410fb_info);
+
/* NAND Controller */
static struct resource s3c_nand_resource[] = {
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 973a5fe6769..66d8c068e94 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -184,14 +184,14 @@ struct irqchip s3c_irq_level_chip = {
.ack = s3c_irq_maskack,
.mask = s3c_irq_mask,
.unmask = s3c_irq_unmask,
- .wake = s3c_irq_wake
+ .set_wake = s3c_irq_wake
};
static struct irqchip s3c_irq_chip = {
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
.unmask = s3c_irq_unmask,
- .wake = s3c_irq_wake
+ .set_wake = s3c_irq_wake
};
/* S3C2410_EINTMASK
@@ -350,16 +350,16 @@ static struct irqchip s3c_irqext_chip = {
.mask = s3c_irqext_mask,
.unmask = s3c_irqext_unmask,
.ack = s3c_irqext_ack,
- .type = s3c_irqext_type,
- .wake = s3c_irqext_wake
+ .set_type = s3c_irqext_type,
+ .set_wake = s3c_irqext_wake
};
static struct irqchip s3c_irq_eint0t4 = {
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
.unmask = s3c_irq_unmask,
- .wake = s3c_irq_wake,
- .type = s3c_irqext_type,
+ .set_wake = s3c_irq_wake,
+ .set_type = s3c_irqext_type,
};
/* mask values for the parent registers for each of the interrupt types */
@@ -496,11 +496,11 @@ static void s3c_irq_demux_adc(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
mydesc = irq_desc + IRQ_TC;
- mydesc->handle( IRQ_TC, mydesc, regs);
+ desc_handle_irq(IRQ_TC, mydesc, regs);
}
if (subsrc & 2) {
mydesc = irq_desc + IRQ_ADC;
- mydesc->handle(IRQ_ADC, mydesc, regs);
+ desc_handle_irq(IRQ_ADC, mydesc, regs);
}
}
}
@@ -529,17 +529,17 @@ static void s3c_irq_demux_uart(unsigned int start,
desc = irq_desc + start;
if (subsrc & 1)
- desc->handle(start, desc, regs);
+ desc_handle_irq(start, desc, regs);
desc++;
if (subsrc & 2)
- desc->handle(start+1, desc, regs);
+ desc_handle_irq(start+1, desc, regs);
desc++;
if (subsrc & 4)
- desc->handle(start+2, desc, regs);
+ desc_handle_irq(start+2, desc, regs);
}
}
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
new file mode 100644
index 00000000000..f87aa0b669a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -0,0 +1,270 @@
+/* linux/arch/arm/mach-s3c2410/mach-anubis.c
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 02-May-2005 BJD Copied from mach-bast.c
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/anubis-map.h>
+#include <asm/arch/anubis-irq.h>
+#include <asm/arch/anubis-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+ /* ISA IO areas */
+
+ { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE },
+ { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE },
+
+ /* we could possibly compress the next set down into a set of smaller tables
+ * pagetables, but that would mean using an L2 section, and it still means
+ * we cannot actually feed the same register to an LDR due to 16K spacing
+ */
+
+ /* CPLD control registers */
+
+ { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE },
+ { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE },
+
+ /* IDE drives */
+
+ { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE },
+ { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE },
+
+ { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE },
+ { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
+ [0] = {
+ .name = "uclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0.
+ }
+};
+
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = anubis_serial_clocks,
+ .clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+ },
+ [1] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = anubis_serial_clocks,
+ .clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+ },
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+struct mtd_partition anubis_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set anubis_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part
+ },
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(ANUBIS_VA_CTRL1);
+ tmp &= ~ANUBIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand anubis_nand_info = {
+ .tacls = 25,
+ .twrph0 = 80,
+ .twrph1 = 80,
+ .nr_sets = ARRAY_SIZE(anubis_nand_sets),
+ .sets = anubis_nand_sets,
+ .select_chip = anubis_nand_select,
+};
+
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+};
+
+static struct clk *anubis_clocks[] = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c24xx_board anubis_board __initdata = {
+ .devices = anubis_devices,
+ .devices_count = ARRAY_SIZE(anubis_devices),
+ .clocks = anubis_clocks,
+ .clocks_count = ARRAY_SIZE(anubis_clocks)
+};
+
+void __init anubis_map_io(void)
+{
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = NULL;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = NULL;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c_device_nand.dev.platform_data = &anubis_nand_info;
+
+ s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ s3c24xx_set_board(&anubis_board);
+
+ /* ensure that the GPIO is setup */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .phys_ram = S3C2410_SDRAM_PA,
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = anubis_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index e9182242da9..1a3367da640 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -381,7 +381,7 @@ static struct plat_serial8250_port bast_sio_data[] = {
static struct platform_device bast_sio = {
.name = "serial8250",
- .id = 0,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = &bast_sio_data,
},
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index ea4fb1a97a5..6ff1889fbd2 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -45,6 +45,9 @@
//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/fb.h>
#include <linux/serial_core.h>
@@ -88,6 +91,48 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = {
+/**
+ * Set lcd on or off
+ **/
+static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
+ .fixed_syncs= 1,
+ .regs={
+ .lcdcon1= S3C2410_LCDCON1_TFT16BPP | \
+ S3C2410_LCDCON1_TFT | \
+ S3C2410_LCDCON1_CLKVAL(0x0C),
+
+ .lcdcon2= S3C2410_LCDCON2_VBPD(7) | \
+ S3C2410_LCDCON2_LINEVAL(319) | \
+ S3C2410_LCDCON2_VFPD(6) | \
+ S3C2410_LCDCON2_VSPW(0),
+
+ .lcdcon3= S3C2410_LCDCON3_HBPD(19) | \
+ S3C2410_LCDCON3_HOZVAL(239) | \
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4= S3C2410_LCDCON4_MVAL(0) | \
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5= S3C2410_LCDCON5_FRM565 | \
+ S3C2410_LCDCON5_INVVLINE | \
+ S3C2410_LCDCON5_HWSWP,
+ },
+ .lpcsel= 0x02,
+ .gpccon= 0xaa940659,
+ .gpccon_mask= 0xffffffff,
+ .gpcup= 0x0000ffff,
+ .gpcup_mask= 0xffffffff,
+ .gpdcon= 0xaa84aaa0,
+ .gpdcon_mask= 0xffffffff,
+ .gpdup= 0x0000faff,
+ .gpdup_mask= 0xffffffff,
+
+ .width= 240,
+ .height= 320,
+ .xres= {240,240,240},
+ .yres= {320,320,320},
+ .bpp= {16,16,16},
+};
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
@@ -116,6 +161,11 @@ void __init h1940_init_irq(void)
}
+void __init h1940_init(void)
+{
+ set_s3c2410fb_info(&h1940_lcdcfg);
+}
+
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_ram = S3C2410_SDRAM_PA,
@@ -124,5 +174,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.init_irq = h1940_init_irq,
+ .init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 79044d9bce3..66bf5bb2b3d 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -110,34 +110,24 @@ void __init n30_init_irq(void)
s3c24xx_init_irq();
}
-
-static int n30_usbstart_thread(void *unused)
-{
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
- writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR);
-
- /* Turn off the D+ pull up for 3 seconds so that the USB host
- * at the other end will do a rescan of the USB bus. */
- s3c2410_gpio_setpin(S3C2410_GPB3, 0);
-
- msleep_interruptible(3*HZ);
-
- s3c2410_gpio_setpin(S3C2410_GPB3, 1);
-
- return 0;
-}
-
+/* GPB3 is the line that controls the pull-up for the USB D+ line */
void __init n30_init(void)
{
s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
- kthread_run(n30_usbstart_thread, NULL, "n30_usbstart");
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
}
MACHINE_START(N30, "Acer-N30")
- /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */
+ /* Maintainer: Christer Weinigel <christer@weinigel.se>,
+ Ben Dooks <ben-linux@fluff.org>
+ */
.phys_ram = S3C2410_SDRAM_PA,
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 924e8464c21..8f9ab2893df 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -221,7 +221,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
static struct platform_device serial_device = {
.name = "serial8250",
- .id = 0,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
index 2cb79883222..4c7ccef6c20 100644
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -48,7 +48,7 @@ static __init int pm_simtec_init(void)
/* check which machine we are running on */
- if (!machine_is_bast() && !machine_is_vr1000())
+ if (!machine_is_bast() && !machine_is_vr1000() && !machine_is_anubis())
return 0;
printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 13a48ee7748..fe57d966a34 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -585,14 +585,16 @@ static int s3c2410_pm_enter(suspend_state_t state)
s3c2410_pm_check_store();
- // need to make some form of time-delta
-
/* send the cpu to sleep... */
__raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
s3c2410_cpu_suspend(regs_save);
+ /* restore the cpu state */
+
+ cpu_init();
+
/* unset the return-from-sleep flag, to ensure reset */
tmp = __raw_readl(S3C2410_GSTATUS2);
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c
index 7cb9912242a..278d0044c85 100644
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2440-irq.c
@@ -64,11 +64,11 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
mydesc = irq_desc + IRQ_S3C2440_WDT;
- mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_WDT, mydesc, regs);
}
if (subsrc & 2) {
mydesc = irq_desc + IRQ_S3C2440_AC97;
- mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_AC97, mydesc, regs);
}
}
}
@@ -122,11 +122,11 @@ static void s3c_irq_demux_cam(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
mydesc = irq_desc + IRQ_S3C2440_CAM_C;
- mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc, regs);
}
if (subsrc & 2) {
mydesc = irq_desc + IRQ_S3C2440_CAM_P;
- mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+ desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc, regs);
}
}
}
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c
index 765a3a9ae03..c0acfb2ad79 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/mach-s3c2410/time.c
@@ -164,7 +164,7 @@ static void s3c2410_timer_setup (void)
/* configure the system for whichever machine is in use */
- if (machine_is_bast() || machine_is_vr1000()) {
+ if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) {
/* timer is at 12MHz, scaler is 1 */
timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
tcnt = 12000000 / HZ;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 18:58:31 +0000