5 files changed, 36 insertions, 32 deletions
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 14252f57375..212141baebe 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -24,6 +24,7 @@ config MACH_SMDK2443
 	bool "SMDK2443"
 	select CPU_S3C2443
 	select MACH_SMDK
+	select S3C_DEV_HSMMC
 	help
 	  Say Y here if you are using an SMDK2443
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index f854e7385e3..2785d69c95b 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -29,7 +29,6 @@
 #include <linux/sysdev.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -39,6 +38,8 @@
 
 #include <mach/regs-s3c2443-clock.h>
 
+#include <plat/cpu-freq.h>
+
 #include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -145,12 +146,6 @@ static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
 
 /* clock selections */
 
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-	.name		= "ext",
-	.id		= -1,
-};
-
 static struct clk clk_mpllref = {
 	.name		= "mpllref",
 	.parent		= &clk_xtal,
@@ -165,14 +160,6 @@ static struct clk clk_mpll = {
 };
 #endif
 
-static struct clk clk_epllref;
-
-static struct clk clk_epll = {
-	.name		= "epll",
-	.parent		= &clk_epllref,
-	.id		= -1,
-};
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
@@ -1011,22 +998,20 @@ static struct clk *clks[] __initdata = {
 	&clk_prediv,
 };
 
-void __init s3c2443_init_clocks(int xtal)
+void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
 	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	struct clk *xtal_clk;
+	unsigned long xtal;
 	unsigned long pll;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
-	struct clk *clkp;
-	int ret;
-	int ptr;
 
-	/* s3c2443 parents h and p clocks from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_p.parent = &clk_prediv;
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
 
 	pll = s3c2443_get_mpll(mpllcon, xtal);
 	clk_msysclk.rate = pll;
@@ -1036,13 +1021,29 @@ void __init s3c2443_init_clocks(int xtal)
 	hclk /= s3c2443_get_hdiv(clkdiv0);
  	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
 
 	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
 	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
 	       print_mhz(pll), print_mhz(fclk),
 	       print_mhz(hclk), print_mhz(pclk));
 
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2443_init_clocks(int xtal)
+{
+	struct clk *clkp;
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	int ret;
+	int ptr;
+
+	/* s3c2443 parents h and p clocks from prediv */
+	clk_h.parent = &clk_prediv;
+	clk_p.parent = &clk_prediv;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c2443_setup_clocks();
 	s3c2443_clk_initparents();
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -1056,7 +1057,7 @@ void __init s3c2443_init_clocks(int xtal)
 	}
 
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-
+	clk_epll.parent = &clk_epllref;
 	clk_usb_bus.parent = &clk_usb_bus_host;
 
 	/* ensure usb bus clock is within correct rate of 48MHz */
@@ -1105,4 +1106,6 @@ void __init s3c2443_init_clocks(int xtal)
 
 		(clkp->enable)(clkp, 0);
 	}
+
+	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f73ccb25ff9..2a58a4d5aa5 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,7 +18,6 @@
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
 #include <mach/dma.h>
 
 #include <plat/dma.h>
@@ -26,12 +25,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 
 #define MAP(x) { \
 		[0]	= (x) | DMA_CH_VALID,	\
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index a7fe65f3dcc..039a4624310 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -37,6 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
 
 static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_hsmmc,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc0,
 };
 
 static void __init smdk2443_map_io(void)
@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void)
 
 static void __init smdk2443_machine_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index bbeddf9ddcb..ce2ec329893 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
  */
 
-void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2443_map_io(void)
 {
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
 /* need to register class before we actually register the device, and