1 files changed, 0 insertions, 284 deletions
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
deleted file mode 100644
index d1afcf9252d..00000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk clk_lcd = {
-	.name		= "lcd",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
-	.name		= "gpio",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
-	.name		= "usb-host",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
-	.name		= "usb-device",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
-	.name		= "timers",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.0",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.1",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.2",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
-	.name		= "rtc",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
-	.name		= "watchdog",
-	.parent		= &clk_p,
-	.ctrlbit	= 0,
-};
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
-	.name		= "usb-bus-gadget",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
-	&clk_lcd,
-	&clk_gpio,
-	&clk_usb_host,
-	&clk_usb_device,
-	&clk_timers,
-	&s3c24xx_clk_uart0,
-	&s3c24xx_clk_uart1,
-	&s3c24xx_clk_uart2,
-	&clk_rtc,
-	&clk_watchdog,
-	&clk_usb_bus_host,
-	&clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-		struct clk *clkp = init_clocks[ptr];
-
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}