1 files changed, 132 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
new file mode 100644
index 00000000000..d91c1a72513
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -0,0 +1,132 @@
+/* linux/arch/arm/mach-s3c2410/usb-simtec.c
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.simtec.co.uk/products/EB2410ITX/
+ *
+ * Simtec BAST and Thorcom VR1000 USB port support functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/gpio.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/usb-control.h>
+#include <plat/devs.h>
+
+#include "simtec.h"
+
+/* control power and monitor over-current events on various Simtec
+ * designed boards.
+*/
+
+static unsigned int power_state[2];
+
+static void
+usb_simtec_powercontrol(int port, int to)
+{
+	pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
+
+	power_state[port] = to;
+
+	if (power_state[0] && power_state[1])
+		gpio_set_value(S3C2410_GPB(4), 0);
+	else
+		gpio_set_value(S3C2410_GPB(4), 1);
+}
+
+static irqreturn_t
+usb_simtec_ocirq(int irq, void *pw)
+{
+	struct s3c2410_hcd_info *info = pw;
+
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
+		pr_debug("usb_simtec: over-current irq (oc detected)\n");
+		s3c2410_usb_report_oc(info, 3);
+	} else {
+		pr_debug("usb_simtec: over-current irq (oc cleared)\n");
+		s3c2410_usb_report_oc(info, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
+{
+	int ret;
+
+	if (on) {
+		ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+				  IRQF_DISABLED | IRQF_TRIGGER_RISING |
+				   IRQF_TRIGGER_FALLING,
+				  "USB Over-current", info);
+		if (ret != 0) {
+			printk(KERN_ERR "failed to request usb oc irq\n");
+		}
+	} else {
+		free_irq(IRQ_USBOC, info);
+	}
+}
+
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED
+	},
+	.port[1]	= {
+		.flags	= S3C_HCDFLG_USED
+	},
+
+	.power_control	= usb_simtec_powercontrol,
+	.enable_oc	= usb_simtec_enableoc,
+};
+
+
+int usb_simtec_init(void)
+{
+	int ret;
+
+	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
+
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_ohci_set_platdata(&usb_simtec_info);
+	return 0;
+}