diff options
Diffstat (limited to 'arch/arm/mach-s3c24xx')
55 files changed, 275 insertions, 1647 deletions
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 37f513d1588..0a8663c5f2b 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -30,6 +30,7 @@ config CPU_S3C2410 select S3C2410_CLOCK select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -41,6 +42,7 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM + select SAMSUNG_HRT help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -53,6 +55,7 @@ config CPU_S3C2416 select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2416 SoC from the S3C24XX line @@ -63,6 +66,7 @@ config CPU_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA + select SAMSUNG_HRT help Support for S3C2440 Samsung Mobile CPU based systems. @@ -72,6 +76,7 @@ config CPU_S3C2442 select CPU_LLSERIAL_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2442 Samsung Mobile CPU based systems. @@ -87,6 +92,7 @@ config CPU_S3C2443 select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2443 SoC from the S3C24XX line @@ -401,6 +407,7 @@ config S3C2412_DMA config S3C2412_PM bool select S3C2412_PM_SLEEP + select SAMSUNG_WAKEMASK help Internal config node to apply S3C2412 power management diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index af53d27d5c3..6f46ecfc839 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,7 +14,7 @@ obj- := # core -obj-y += common.o irq.o +obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o @@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o @@ -31,9 +31,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index c0daa9590b4..cb1b791954d 100644 --- a/arch/arm/mach-s3c24xx/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c @@ -34,8 +34,6 @@ #include <mach/hardware.h> #include <mach/regs-irq.h> -#include <plat/irq.h> - #include "bast.h" #define irqdbf(x...) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index 641266f3d15..34fffdf6fc1 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -40,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d10b695a906..2cc017da88f 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -41,7 +41,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 14a81c2317a..036056cea57 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/clk.h> -#include <plat/s3c2416.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index bdaba59b42d..0a53051b078 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -41,7 +41,6 @@ #include <plat/cpu-freq.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 3b2cf6db363..404444dd384 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -41,11 +41,12 @@ #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/pm.h> +#include "common-smdk.h" + /* LED devices */ static struct s3c24xx_led_platdata smdk_pdata_led4 = { diff --git a/arch/arm/mach-s3c24xx/common-smdk.h b/arch/arm/mach-s3c24xx/common-smdk.h new file mode 100644 index 00000000000..98f733e1cb4 --- /dev/null +++ b/arch/arm/mach-s3c24xx/common-smdk.h @@ -0,0 +1,14 @@ +/* + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Common code for SMDK2410 and SMDK2440 boards + * + * http://www.fluff.org/ben/smdk2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void smdk_machine_init(void); diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 6bcf87f65f9..d97533d21ac 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -47,14 +47,11 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> -#include <plat/s3c2416.h> -#include <plat/s3c244x.h> -#include <plat/s3c2443.h> #include <plat/cpu-freq.h> #include <plat/pll.h> +#include "common.h" + /* table of supported CPUs */ static const char name_s3c2410[] = "S3C2410"; diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index ed6276fcaa3..307c3714be5 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -12,8 +12,98 @@ #ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H #define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ -void s3c2410_restart(char mode, const char *cmd); -void s3c244x_restart(char mode, const char *cmd); +struct s3c2410_uartcfg; + +#ifdef CONFIG_CPU_S3C2410 +extern int s3c2410_init(void); +extern int s3c2410a_init(void); +extern void s3c2410_map_io(void); +extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2410_init_clocks(int xtal); +extern void s3c2410_restart(char mode, const char *cmd); +extern void s3c2410_init_irq(void); +#else +#define s3c2410_init_clocks NULL +#define s3c2410_init_uarts NULL +#define s3c2410_map_io NULL +#define s3c2410_init NULL +#define s3c2410a_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2412 +extern int s3c2412_init(void); +extern void s3c2412_map_io(void); +extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2412_init_clocks(int xtal); +extern int s3c2412_baseclk_add(void); +extern void s3c2412_restart(char mode, const char *cmd); +extern void s3c2412_init_irq(void); +#else +#define s3c2412_init_clocks NULL +#define s3c2412_init_uarts NULL +#define s3c2412_map_io NULL +#define s3c2412_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2416 +extern int s3c2416_init(void); +extern void s3c2416_map_io(void); +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2416_init_clocks(int xtal); +extern int s3c2416_baseclk_add(void); +extern void s3c2416_restart(char mode, const char *cmd); +extern void s3c2416_init_irq(void); + +extern struct syscore_ops s3c2416_irq_syscore_ops; +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +extern void s3c244x_map_io(void); +extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c244x_init_clocks(int xtal); +extern void s3c244x_restart(char mode, const char *cmd); +#else +#define s3c244x_init_clocks NULL +#define s3c244x_init_uarts NULL +#endif + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +extern void s3c2440_map_io(void); +extern void s3c2440_init_irq(void); +#else +#define s3c2440_init NULL +#define s3c2440_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +extern void s3c2442_map_io(void); +extern void s3c2442_init_irq(void); +#else +#define s3c2442_init NULL +#define s3c2442_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2443 +extern int s3c2443_init(void); +extern void s3c2443_map_io(void); +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2443_init_clocks(int xtal); +extern int s3c2443_baseclk_add(void); +extern void s3c2443_restart(char mode, const char *cmd); +extern void s3c2443_init_irq(void); +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif extern struct syscore_ops s3c24xx_irq_syscore_ops; diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 25d085adc93..a6c94b82095 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index d2408ba372c..c0e8c3f5057 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 0b86e74d104..1c08eccd942 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 05536254a3f..000e4c69fce 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -28,7 +28,6 @@ #include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> #include <plat/regs-iis.h> #include <plat/regs-spi.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 13ed33c6911..2558952e314 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -98,4 +98,4 @@ /* include the reset of the code which will do the work */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S deleted file mode 100644 index 6a21beeba1d..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include <mach/hardware.h> -#include <asm/irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [\base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [\base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index b7a9f4d469e..43cada8019b 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -59,49 +59,53 @@ #define IRQ_ADCPARENT S3C2410_IRQ(31) /* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) +#define IRQ_EINT0_2412 S3C2410_IRQ(32) +#define IRQ_EINT1_2412 S3C2410_IRQ(33) +#define IRQ_EINT2_2412 S3C2410_IRQ(34) +#define IRQ_EINT3_2412 S3C2410_IRQ(35) +#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */ +#define IRQ_EINT5 S3C2410_IRQ(37) +#define IRQ_EINT6 S3C2410_IRQ(38) +#define IRQ_EINT7 S3C2410_IRQ(39) +#define IRQ_EINT8 S3C2410_IRQ(40) +#define IRQ_EINT9 S3C2410_IRQ(41) +#define IRQ_EINT10 S3C2410_IRQ(42) +#define IRQ_EINT11 S3C2410_IRQ(43) +#define IRQ_EINT12 S3C2410_IRQ(44) +#define IRQ_EINT13 S3C2410_IRQ(45) +#define IRQ_EINT14 S3C2410_IRQ(46) +#define IRQ_EINT15 S3C2410_IRQ(47) +#define IRQ_EINT16 S3C2410_IRQ(48) +#define IRQ_EINT17 S3C2410_IRQ(49) +#define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT19 S3C2410_IRQ(51) +#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */ +#define IRQ_EINT21 S3C2410_IRQ(53) +#define IRQ_EINT22 S3C2410_IRQ(54) +#define IRQ_EINT23 S3C2410_IRQ(55) #define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) +#define IRQ_LCD_FIFO S3C2410_IRQ(56) +#define IRQ_LCD_FRAME S3C2410_IRQ(57) /* IRQs for the interal UARTs, and ADC * these need to be ordered in number of appearance in the * SUBSRC mask register */ -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58) -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */ #define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) #define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */ #define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) #define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */ #define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) #define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) @@ -136,7 +140,7 @@ /* second interrupt-register of s3c2416/s3c2450 */ -#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29) +#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29) #define IRQ_S3C2416_2D S3C2416_IRQ(0) #define IRQ_S3C2416_IIC1 S3C2416_IRQ(1) #define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h deleted file mode 100644 index cbf2d8884e3..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h +++ /dev/null @@ -1,127 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 MMC/SDIO register definitions -*/ - -#ifndef __ASM_ARM_REGS_SDI -#define __ASM_ARM_REGS_SDI "regs-sdi.h" - -#define S3C2410_SDICON (0x00) -#define S3C2410_SDIPRE (0x04) -#define S3C2410_SDICMDARG (0x08) -#define S3C2410_SDICMDCON (0x0C) -#define S3C2410_SDICMDSTAT (0x10) -#define S3C2410_SDIRSP0 (0x14) -#define S3C2410_SDIRSP1 (0x18) -#define S3C2410_SDIRSP2 (0x1C) -#define S3C2410_SDIRSP3 (0x20) -#define S3C2410_SDITIMER (0x24) -#define S3C2410_SDIBSIZE (0x28) -#define S3C2410_SDIDCON (0x2C) -#define S3C2410_SDIDCNT (0x30) -#define S3C2410_SDIDSTA (0x34) -#define S3C2410_SDIFSTA (0x38) - -#define S3C2410_SDIDATA (0x3C) -#define S3C2410_SDIIMSK (0x40) - -#define S3C2440_SDIDATA (0x40) -#define S3C2440_SDIIMSK (0x3C) - -#define S3C2440_SDICON_SDRESET (1<<8) -#define S3C2440_SDICON_MMCCLOCK (1<<5) -#define S3C2410_SDICON_BYTEORDER (1<<4) -#define S3C2410_SDICON_SDIOIRQ (1<<3) -#define S3C2410_SDICON_RWAITEN (1<<2) -#define S3C2410_SDICON_FIFORESET (1<<1) -#define S3C2410_SDICON_CLOCKTYPE (1<<0) - -#define S3C2410_SDICMDCON_ABORT (1<<12) -#define S3C2410_SDICMDCON_WITHDATA (1<<11) -#define S3C2410_SDICMDCON_LONGRSP (1<<10) -#define S3C2410_SDICMDCON_WAITRSP (1<<9) -#define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -#define S3C2410_SDICMDCON_INDEX (0x3f) - -#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -#define S3C2410_SDICMDSTAT_XFERING (1<<8) -#define S3C2410_SDICMDSTAT_INDEX (0xff) - -#define S3C2440_SDIDCON_DS_BYTE (0<<22) -#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -#define S3C2440_SDIDCON_DS_WORD (2<<22) -#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -#define S3C2410_SDIDCON_WIDEBUS (1<<16) -#define S3C2410_SDIDCON_DMAEN (1<<15) -#define S3C2410_SDIDCON_STOP (1<<14) -#define S3C2440_SDIDCON_DATSTART (1<<14) -#define S3C2410_SDIDCON_DATMODE (3<<12) -#define S3C2410_SDIDCON_BLKNUM (0x7ff) - -/* constants for S3C2410_SDIDCON_DATMODE */ -#define S3C2410_SDIDCON_XFER_READY (0<<12) -#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) - -#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) - -#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -#define S3C2410_SDIDSTA_TXDATAON (1<<1) -#define S3C2410_SDIDSTA_RXDATAON (1<<0) - -#define S3C2440_SDIFSTA_FIFORESET (1<<16) -#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -#define S3C2410_SDIFSTA_TFDET (1<<13) -#define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TFHALF (1<<11) -#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -#define S3C2410_SDIFSTA_RFLAST (1<<9) -#define S3C2410_SDIFSTA_RFFULL (1<<8) -#define S3C2410_SDIFSTA_RFHALF (1<<7) -#define S3C2410_SDIFSTA_COUNTMASK (0x7f) - -#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -#define S3C2410_SDIIMSK_CMDSENT (1<<16) -#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -#define S3C2410_SDIIMSK_READWAIT (1<<13) -#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -#define S3C2410_SDIIMSK_DATACRC (1<<9) -#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) - -#endif /* __ASM_ARM_REGS_SDI */ diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c index e1199599873..b91341ef2b2 100644 --- a/arch/arm/mach-s3c24xx/irq-pm.c +++ b/arch/arm/mach-s3c24xx/irq-pm.c @@ -16,10 +16,15 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/syscore_ops.h> +#include <linux/io.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/irq.h> +#include <plat/map-base.h> +#include <plat/map-s3c.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> #include <asm/irq.h> diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c deleted file mode 100644 index 67d763178d3..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2412.c +++ /dev/null @@ -1,215 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/irq.h> -#include <plat/pm.h> - -#include "s3c2412-power.h" - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) -#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) - -/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by - * having them turn up in both the INT* and the EINT* registers. Whilst - * both show the status, they both now need to be acked when the IRQs - * go off. -*/ - -static void -s3c2412_irq_mask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask | bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); -} - -static inline void -s3c2412_irq_ack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c2412_irq_maskack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static void -s3c2412_irq_unmask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask & ~bitval, S3C2412_EINTMASK); - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask & ~bitval, S3C2410_INTMSK); -} - -static struct irq_chip s3c2412_irq_eint0t4 = { - .irq_ack = s3c2412_irq_ack, - .irq_mask = s3c2412_irq_mask, - .irq_unmask = s3c2412_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext_type, -}; - -#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0))) - -/* CF and SDI sub interrupts */ - -static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - - if (subsrc & INTBIT(IRQ_S3C2412_SDI)) - generic_handle_irq(IRQ_S3C2412_SDI); - - if (subsrc & INTBIT(IRQ_S3C2412_CF)) - generic_handle_irq(IRQ_S3C2412_CF); -} - -#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0)) -#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF) - -static void s3c2412_irq_cfsdi_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static struct irq_chip s3c2412_irq_cfsdi = { - .name = "s3c2412-cfsdi", - .irq_ack = s3c2412_irq_cfsdi_ack, - .irq_mask = s3c2412_irq_cfsdi_mask, - .irq_unmask = s3c2412_irq_cfsdi_unmask, -}; - -static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) -{ - unsigned long pwrcfg; - - pwrcfg = __raw_readl(S3C2412_PWRCFG); - if (state) - pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; - else - pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; - __raw_writel(pwrcfg, S3C2412_PWRCFG); - - return s3c_irq_chip.irq_set_wake(data, state); -} - -static struct irq_chip s3c2412_irq_rtc_chip; - -static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add demux support for CF/SDI */ - - irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); - - for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* change RTC IRQ's set wake method */ - - s3c2412_irq_rtc_chip = s3c_irq_chip; - s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake; - - irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); - - return 0; -} - -static struct subsys_interface s3c2412_irq_interface = { - .name = "s3c2412_irq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_irq_add, -}; - -static int s3c2412_irq_init(void) -{ - return subsys_interface_register(&s3c2412_irq_interface); -} - -arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c deleted file mode 100644 index 4a18cde439c..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2440.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_WDT); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_AC97); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); -} - -static void -s3c_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .irq_mask = s3c_irq_wdtac97_mask, - .irq_unmask = s3c_irq_wdtac97_unmask, - .irq_ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c deleted file mode 100644 index 5fe8e58d3af..00000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c244x.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); -} - -static void -s3c_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); -} - -static struct irq_chip s3c_irq_cam = { - .irq_mask = s3c_irq_cam_mask, - .irq_unmask = s3c_irq_cam_unmask, - .irq_ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, - handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_cam, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - -static struct subsys_interface s3c2442_irq_interface = { - .name = "s3c2442_irq", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_irq_add, -}; - - -static int s3c2442_irq_init(void) -{ - return subsys_interface_register(&s3c2442_irq_interface); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c deleted file mode 100644 index cb9f5e011e7..00000000000 --- a/arch/arm/mach-s3c24xx/irq.c +++ /dev/null @@ -1,822 +0,0 @@ -/* - * S3C24XX IRQ handling - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irqdomain.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/regs-irqtype.h> -#include <plat/pm.h> -#include <plat/irq.h> - -#define S3C_IRQTYPE_NONE 0 -#define S3C_IRQTYPE_EINT 1 -#define S3C_IRQTYPE_EDGE 2 -#define S3C_IRQTYPE_LEVEL 3 - -struct s3c_irq_data { - unsigned int type; - unsigned long parent_irq; - - /* data gets filled during init */ - struct s3c_irq_intc *intc; - unsigned long sub_bits; - struct s3c_irq_intc *sub_intc; -}; - -/* - * Sructure holding the controller data - * @reg_pending register holding pending irqs - * @reg_intpnd special register intpnd in main intc - * @reg_mask mask register - * @domain irq_domain of the controller - * @parent parent controller for ext and sub irqs - * @irqs irq-data, always s3c_irq_data[32] - */ -struct s3c_irq_intc { - void __iomem *reg_pending; - void __iomem *reg_intpnd; - void __iomem *reg_mask; - struct irq_domain *domain; - struct s3c_irq_intc *parent; - struct s3c_irq_data *irqs; -}; - -static void s3c_irq_mask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - struct s3c_irq_data *parent_data; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc && irq_data->parent_irq) { - parent_data = &parent_intc->irqs[irq_data->parent_irq]; - - /* check to see if we need to mask the parent IRQ */ - if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_mask(irq_get_irq_data(irqno)); - } - } -} - -static void s3c_irq_unmask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc && irq_data->parent_irq) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_unmask(irq_get_irq_data(irqno)); - } -} - -static inline void s3c_irq_ack(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; - - __raw_writel(bitval, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(bitval, intc->reg_intpnd); -} - -static int s3c_irqext_type_set(void __iomem *gpcon_reg, - void __iomem *extint_reg, - unsigned long gpcon_offset, - unsigned long extint_offset, - unsigned int type) -{ - unsigned long newvalue = 0, value; - - /* Set the GPIO to external interrupt mode */ - value = __raw_readl(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - __raw_writel(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQ_TYPE_NONE: - pr_warn("No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - pr_err("No such irq type %d", type); - return -EINVAL; - } - - value = __raw_readl(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - __raw_writel(value, extint_reg); - - return 0; -} - -/* FIXME: make static when it's out of plat-samsung/irq.h */ -int s3c_irqext_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 4) && (data->hwirq <= 7)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 8) * 4; - } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 16) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static int s3c_irqext0_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 0) && (data->hwirq <= 3)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -struct irq_chip s3c_irq_chip = { - .name = "s3c", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake -}; - -struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, -}; - -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irqext_type, - .irq_set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext0_type, -}; - -static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; - struct s3c_irq_intc *sub_intc = irq_data->sub_intc; - unsigned long src; - unsigned long msk; - unsigned int n; - - chained_irq_enter(chip, desc); - - src = __raw_readl(sub_intc->reg_pending); - msk = __raw_readl(sub_intc->reg_mask); - - src &= ~msk; - src &= irq_data->sub_bits; - - while (src) { - n = __ffs(src); - src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); - } - - chained_irq_exit(chip, desc); -} - -#ifdef CONFIG_FIQ -/** - * s3c24xx_set_fiq - set the FIQ routing - * @irq: IRQ number to route to FIQ on processor. - * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. - * - * Change the state of the IRQ to FIQ routing depending on @irq and @on. If - * @on is true, the @irq is checked to see if it can be routed and the - * interrupt controller updated to route the IRQ. If @on is false, the FIQ - * routing is cleared, regardless of which @irq is specified. - */ -int s3c24xx_set_fiq(unsigned int irq, bool on) -{ - u32 intmod; - unsigned offs; - - if (on) { - offs = irq - FIQ_START; - if (offs > 31) - return -EINVAL; - - intmod = 1 << offs; - } else { - intmod = 0; - } - - __raw_writel(intmod, S3C2410_INTMOD); - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); -#endif - -static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct s3c_irq_intc *intc = h->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[hw]; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *parent_irq_data; - unsigned int irqno; - - if (!intc) { - pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); - return -EINVAL; - } - - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); - return -EINVAL; - } - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - - /* set handler and flags */ - switch (irq_data->type) { - case S3C_IRQTYPE_NONE: - return 0; - case S3C_IRQTYPE_EINT: - if (irq_data->parent_irq) - irq_set_chip_and_handler(virq, &s3c_irqext_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, - handle_edge_irq); - break; - case S3C_IRQTYPE_EDGE: - if (irq_data->parent_irq || - intc->reg_pending == S3C2416_SRCPND2) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_edge_irq); - break; - case S3C_IRQTYPE_LEVEL: - if (irq_data->parent_irq) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_level_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_level_irq); - break; - default: - pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); - return -EINVAL; - } - set_irq_flags(virq, IRQF_VALID); - - if (irq_data->parent_irq) { - parent_intc = intc->parent; - if (!parent_intc) { - pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", - hw); - goto err; - } - - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", - hw); - goto err; - } - - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << hw); - - /* attach the demuxer to the parent irq */ - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - if (!irqno) { - pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", - irq_data->parent_irq); - goto err; - } - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; - -err: - set_irq_flags(virq, 0); - - /* the only error can result from bad mapping data*/ - return -EINVAL; -} - -static struct irq_domain_ops s3c24xx_irq_ops = { - .map = s3c24xx_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) -{ - void __iomem *reg_source; - unsigned long pend; - unsigned long last; - int i; - - /* if intpnd is set, read the next pending irq from there */ - reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(reg_source); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(pend, intc->reg_intpnd); - - pr_info("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } -} - -struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, - struct s3c_irq_data *irq_data, - struct s3c_irq_intc *parent, - unsigned long address) -{ - struct s3c_irq_intc *intc; - void __iomem *base = (void *)0xf6000000; /* static mapping */ - int irq_num; - int irq_start; - int irq_offset; - int ret; - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return ERR_PTR(-ENOMEM); - - intc->irqs = irq_data; - - if (parent) - intc->parent = parent; - - /* select the correct data for the controller. - * Need to hard code the irq num start and offset - * to preserve the static mapping for now - */ - switch (address) { - case 0x4a000000: - pr_debug("irq: found main intc\n"); - intc->reg_pending = base; - intc->reg_mask = base + 0x08; - intc->reg_intpnd = base + 0x10; - irq_num = 32; - irq_start = S3C2410_IRQ(0); - irq_offset = 0; - break; - case 0x4a000018: - pr_debug("irq: found subintc\n"); - intc->reg_pending = base + 0x18; - intc->reg_mask = base + 0x1c; - irq_num = 29; - irq_start = S3C2410_IRQSUB(0); - irq_offset = 0; - break; - case 0x4a000040: - pr_debug("irq: found intc2\n"); - intc->reg_pending = base + 0x40; - intc->reg_mask = base + 0x48; - intc->reg_intpnd = base + 0x50; - irq_num = 8; - irq_start = S3C2416_IRQ(0); - irq_offset = 0; - break; - case 0x560000a4: - pr_debug("irq: found eintc\n"); - base = (void *)0xfd000000; - - intc->reg_mask = base + 0xa4; - intc->reg_pending = base + 0x08; - irq_num = 20; - irq_start = S3C2410_IRQ(32); - irq_offset = 4; - break; - default: - pr_err("irq: unsupported controller address\n"); - ret = -EINVAL; - goto err; - } - - /* now that all the data is complete, init the irq-domain */ - s3c24xx_clear_intc(intc); - intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - irq_offset, &s3c24xx_irq_ops, - intc); - if (!intc->domain) { - pr_err("irq: could not create irq-domain\n"); - ret = -EINVAL; - goto err; - } - - return intc; - -err: - kfree(intc); - return ERR_PTR(ret); -} - -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ - -static struct s3c_irq_data init_base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -static struct s3c_irq_data init_subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ -}; - -void __init s3c24xx_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); -} - -#ifdef CONFIG_CPU_S3C2416 -static struct s3c_irq_data init_s3c2416base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2416subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -static struct s3c_irq_data init_s3c2416_second[32] = { - { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ -}; - -void __init s3c2416_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2416: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); - - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); -} - -#endif - -#ifdef CONFIG_CPU_S3C2443 -static struct s3c_irq_data init_s3c2443base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - - -static struct s3c_irq_data init_s3c2443subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2443_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2443: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); -} -#endif diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 0e0279e7915..e27b5c91b3d 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -63,6 +63,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> + #include "common.h" static struct resource amlm5900_nor_resource = @@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void) s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } #ifdef CONFIG_FB_S3C2410 @@ -235,8 +238,8 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index bb595f15ce3..c1fb6c37867 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/samsung-time.h> #include "anubis.h" #include "common.h" @@ -410,6 +411,7 @@ static void __init anubis_map_io(void) s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -443,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index b4bc60c78eb..6dfeeb7ef46 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -48,6 +48,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> +#include <plat/samsung-time.h> #include "common.h" @@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void) s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init at2440evb_init(void) @@ -209,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index ca661808104..22d6ae926d9 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -55,6 +55,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -576,6 +577,7 @@ static void __init bast_map_io(void) s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init bast_init(void) @@ -603,8 +605,8 @@ MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index a25e8c5a7b4..13d8d073675 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -81,6 +81,7 @@ #include <plat/gpio-cfg.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "gta02.h" @@ -501,6 +502,7 @@ static void __init gta02_map_io(void) s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -587,8 +589,8 @@ MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ .atag_offset = 0x100, .map_io = gta02_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 79bc0830d74..af4334d6b4d 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -62,7 +62,7 @@ #include <plat/pll.h> #include <plat/pm.h> #include <plat/regs-serial.h> - +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -646,6 +646,7 @@ static void __init h1940_map_io(void) s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -666,11 +667,6 @@ static void __init h1940_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init h1940_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init h1940_init(void) { u32 tmp; @@ -739,8 +735,8 @@ MACHINE_START(H1940, "IPAQ-H1940") .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, - .init_irq = h1940_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 54e83c1f780..a45fcd8ccf7 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -46,14 +46,15 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/s3c2412.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> +#include "common.h" #include "s3c2412-power.h" static struct map_desc jive_iodesc[] __initdata = { @@ -506,6 +507,7 @@ static void __init jive_map_io(void) s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void jive_power_off(void) @@ -658,9 +660,9 @@ MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 2865e5919f2..a83db46320b 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -56,6 +56,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include <sound/s3c24xx_uda134x.h> @@ -525,6 +526,7 @@ static void __init mini2440_map_io(void) s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* @@ -686,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440") .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index d9d04b24029..2cb46c37c92 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -48,8 +48,8 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> -#include <plat/s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> #include "common.h" @@ -536,6 +536,7 @@ static void __init n30_map_io(void) n30_hwinit(); s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* GPB3 is the line that controls the pull-up for the USB D+ line */ @@ -589,9 +590,9 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END @@ -600,9 +601,9 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index a454e246186..01f4354206f 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -41,11 +41,10 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -137,6 +136,7 @@ static void __init nexcoder_map_io(void) s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } @@ -152,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index ae2cbdf3e3c..58d6fbe5bf1 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -45,6 +45,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> @@ -384,6 +385,7 @@ static void __init osiris_map_io(void) s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -424,8 +426,8 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 40a47d6c6a8..7e16b0740ec 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -33,7 +33,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> -#include <plat/s3c2410.h> +#include <plat/samsung-time.h> #include "common.h" #include "otom.h" @@ -102,6 +102,7 @@ static void __init otom11_map_io(void) s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init otom11_init(void) @@ -115,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 56175f0941b..f8feaeadb55 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -55,13 +55,14 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc qt2410_iodesc[] __initdata = { { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } @@ -304,6 +305,7 @@ static void __init qt2410_map_io(void) s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init qt2410_machine_init(void) @@ -341,8 +343,8 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, .map_io = qt2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 1f9ba2ae528..e4d67a33ebe 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -58,6 +58,7 @@ #include <plat/pm.h> #include <plat/regs-iic.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -741,6 +742,7 @@ static void __init rx1950_map_io(void) s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -811,8 +813,8 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index f20418a2fb1..3bc6231d0a1 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -179,6 +180,7 @@ static void __init rx3715_map_io(void) s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -188,11 +190,6 @@ static void __init rx3715_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init rx3715_init_machine(void) { #ifdef CONFIG_PM_H1940 @@ -210,8 +207,8 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, - .init_irq = rx3715_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index e184bfa9613..a773789e4f3 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -51,10 +51,10 @@ #include <plat/devs.h> #include <plat/cpu.h> - -#include <plat/common-smdk.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ @@ -101,6 +101,7 @@ static void __init smdk2410_map_io(void) s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2410_init(void) @@ -115,8 +116,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, .map_io = smdk2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 86d7847c9d4..8146e920f10 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -41,13 +41,13 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <mach/fb.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2413_iodesc[] __initdata = { }; @@ -106,6 +106,7 @@ static void __init smdk2413_map_io(void) s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2413_machine_init(void) @@ -129,10 +130,10 @@ MACHINE_START(S3C2413, "S3C2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -141,10 +142,10 @@ MACHINE_START(SMDK2412, "SMDK2412") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -153,9 +154,9 @@ MACHINE_START(SMDK2413, "SMDK2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index ebb2e61f3d0..cb46847c66b 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -42,7 +42,6 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2416.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> @@ -51,10 +50,12 @@ #include <plat/sdhci.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/s3c-hsudc.h> +#include <plat/samsung-time.h> #include <plat/fb.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2416_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void) s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2416_machine_init(void) @@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 08cc38c8a4a..de2e5d39a84 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,15 +38,13 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> - -#include <plat/common-smdk.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -163,6 +161,7 @@ static void __init smdk2440_map_io(void) s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2440_machine_init(void) @@ -178,9 +177,9 @@ MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index fc65d74d3c7..9435c3bef18 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -38,13 +38,13 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2443_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -122,6 +122,7 @@ static void __init smdk2443_map_io(void) s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2443_machine_init(void) @@ -143,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 24b3d79e7b2..7fad8f055ca 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -53,6 +53,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> #include "common.h" @@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void) s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init tct_hammer_init(void) @@ -147,8 +149,8 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, .map_io = tct_hammer_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index ec42d1e4e46..42e7187fed6 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -45,6 +45,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -332,6 +333,7 @@ static void __init vr1000_map_io(void) s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vr1000_init(void) @@ -353,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 3e2bfddc9df..b66588428ec 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -41,12 +41,12 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> +#include "common.h" static struct map_desc vstms_iodesc[] __initdata = { }; @@ -143,6 +143,7 @@ static void __init vstms_map_io(void) s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vstms_init(void) @@ -157,9 +158,9 @@ MACHINE_START(VSTMS, "VSTMS") .atag_offset = 0x100, .fixup = vstms_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index 668a78a8b19..d75f95e487e 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -29,7 +29,7 @@ #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/s3c2412.h> +#include <plat/wakeup-mask.h> #include "regs-dsc.h" #include "s3c2412-power.h" @@ -52,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg) return 1; /* Aborting suspend */ } +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask wake_irqs[] = { + { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, +}; + static void s3c2412_pm_prepare(void) { + samsung_sync_wakemask(S3C2412_PWRCFG, + wake_irqs, ARRAY_SIZE(wake_irqs)); } static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 9ebef95da72..d850ea5adac 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -37,7 +37,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> -#include <plat/s3c2410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 0d592159a5c..0f864d4c97d 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -44,7 +44,6 @@ #include <plat/pm.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> -#include <plat/s3c2412.h> #include "common.h" #include "regs-dsc.h" diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index e30476db029..b9c5d382daf 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -50,7 +50,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2416.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/sdhci.h> diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 559e394e898..5f9d6569475 100644 --- a/arch/arm/mach-s3c24xx/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -33,7 +33,6 @@ #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index f732826c235..6819961f6b1 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -44,7 +44,6 @@ #include <plat/clock.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 165b6a6b3da..8328cd65bf3 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -36,7 +36,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2443.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index ad2671baa91..2a35edb6735 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -37,8 +37,6 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> |