diff options
Diffstat (limited to 'arch/arm/mach-s3c24xx')
22 files changed, 50 insertions, 247 deletions
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b7..d56b0f7f2b2 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 8702ecfaab3..14a81c2317a 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -144,7 +144,8 @@ static struct clk_lookup s3c2416_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk), + /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), }; void __init s3c2416_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index a4c5a520d99..7f689ce1be6 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -181,7 +181,7 @@ static struct clk *clks[] __initdata = { static struct clk_lookup s3c2443_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk), + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), }; void __init s3c2443_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index aeeb2be283f..aeb4a24ff3e 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -559,7 +559,7 @@ static struct clk hsmmc1_clk = { static struct clk hsspi_clk = { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "s3c2443-spi.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_HSSPI, @@ -633,7 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk), + CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), }; void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 084604be6ad..87e75a250d5 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -182,19 +182,21 @@ static struct platform_device __initdata *smdk_devs[] = { &smdk_led7, }; +static const struct gpio smdk_led_gpios[] = { + { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL }, +}; + void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); - - s3c2410_gpio_setpin(S3C2410_GPF(4), 1); - s3c2410_gpio_setpin(S3C2410_GPF(5), 1); - s3c2410_gpio_setpin(S3C2410_GPF(6), 1); - s3c2410_gpio_setpin(S3C2410_GPF(7), 1); + int ret = gpio_request_array(smdk_led_gpios, + ARRAY_SIZE(smdk_led_gpios)); + if (!WARN_ON(ret < 0)) + gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios)); if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 56cdd34cce4..0c9e9a785ef 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -41,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h deleted file mode 100644 index 4c38b39b741..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * Machine BAST - Power Management chip - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTPMU_H -#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" - -#define BASTPMU_REG_IDENT (0x00) -#define BASTPMU_REG_VERSION (0x01) -#define BASTPMU_REG_DDCCTRL (0x02) -#define BASTPMU_REG_POWER (0x03) -#define BASTPMU_REG_RESET (0x04) -#define BASTPMU_REG_GWO (0x05) -#define BASTPMU_REG_WOL (0x06) -#define BASTPMU_REG_WOR (0x07) -#define BASTPMU_REG_UID (0x09) - -#define BASTPMU_EEPROM (0xC0) - -#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) -#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) -#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) - -#define BASTPMU_IDENT_0 0x53 -#define BASTPMU_IDENT_1 0x42 -#define BASTPMU_IDENT_2 0x50 -#define BASTPMU_IDENT_3 0x4d - -#define BASTPMU_RESET_GUARD (0x55) - -#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b6603..ee99fd56c04 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h index 019ea86057f..3890a05948f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h @@ -93,26 +93,5 @@ enum s3c_gpio_number { #define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) #define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) -/* compatibility until drivers can be modified */ - -#define S3C2410_GPA0 S3C2410_GPA(0) -#define S3C2410_GPA1 S3C2410_GPA(1) -#define S3C2410_GPA3 S3C2410_GPA(3) -#define S3C2410_GPA7 S3C2410_GPA(7) - -#define S3C2410_GPE0 S3C2410_GPE(0) -#define S3C2410_GPE1 S3C2410_GPE(1) -#define S3C2410_GPE2 S3C2410_GPE(2) -#define S3C2410_GPE3 S3C2410_GPE(3) -#define S3C2410_GPE4 S3C2410_GPE(4) -#define S3C2410_GPE5 S3C2410_GPE(5) -#define S3C2410_GPE6 S3C2410_GPE(6) -#define S3C2410_GPE7 S3C2410_GPE(7) -#define S3C2410_GPE8 S3C2410_GPE(8) -#define S3C2410_GPE9 S3C2410_GPE(9) -#define S3C2410_GPE10 S3C2410_GPE(10) - -#define S3C2410_GPH10 S3C2410_GPH(10) - #endif /* __MACH_GPIONRS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h index 3a56a229cac..21739348215 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h @@ -3,82 +3,13 @@ #include <mach/regs-gpio.h> -/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ -#define GTA02v1_SYSTEM_REV 0x00000310 -#define GTA02v2_SYSTEM_REV 0x00000320 -#define GTA02v3_SYSTEM_REV 0x00000330 -#define GTA02v4_SYSTEM_REV 0x00000340 -#define GTA02v5_SYSTEM_REV 0x00000350 -/* since A7 is basically same as A6, we use A6 PCB ID */ -#define GTA02v6_SYSTEM_REV 0x00000360 - -#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */ - -#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0) -#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1) #define GTA02_GPIO_AUX_LED S3C2410_GPB(2) -#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3) -#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5) -#define GTA02_GPIO_BT_EN S3C2410_GPB(6) -#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7) -#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8) #define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) - -#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */ - -#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */ -#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */ -#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */ - -#define GTA02_GPIO_nG1_INT S3C2410_GPF(0) -#define GTA02_GPIO_IO1 S3C2410_GPF(1) -#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4) -#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */ #define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) #define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) - -#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4) -#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */ -#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */ - #define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */ -#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2) #define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4) -#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5) -#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */ -#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7) -#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8) -#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8) -#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10) -#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */ -#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 -#define GTA02_IRQ_MODEM IRQ_EINT1 -#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ -#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 -#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 -#define GTA02_IRQ_AUX IRQ_EINT6 -#define GTA02_IRQ_nHOLD IRQ_EINT7 #define GTA02_IRQ_PCF50633 IRQ_EINT9 -#define GTA02_IRQ_3D IRQ_EINT12 -#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ -#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ - -/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ -#define GTA02_PCB_ID1_0 S3C2410_GPC(13) -#define GTA02_PCB_ID1_1 S3C2410_GPC(15) -#define GTA02_PCB_ID1_2 S3C2410_GPD(0) -#define GTA02_PCB_ID2_0 S3C2410_GPD(3) -#define GTA02_PCB_ID2_1 S3C2410_GPD(4) - -int gta02_get_pcb_revision(void); #endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index cac1ad6b582..a11a638bd59 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -302,7 +302,7 @@ /* S3C2410: * Port G consists of 8 GPIO/IRQ/Special function * - * GPGCON has 2 bits for each of the input pins on port F + * GPGCON has 2 bits for each of the input pins on port G * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -366,7 +366,7 @@ /* Port H consists of11 GPIO/serial/Misc pins * - * GPGCON has 2 bits for each of the input pins on port F + * GPHCON has 2 bits for each of the input pins on port H * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -427,6 +427,19 @@ * for the 2412/2413 from the 2410/2440/2442 */ +/* + * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits + * for each of the pins on port J. + * 00 - input, 01 output, 10 - camera + * + * Pull up works like all other ports. + */ + +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + /* S3C2443 and above */ #define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) #define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h deleted file mode 100644 index 19575e06111..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 0f29f64a3ee..92e1f93a6bc 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -71,7 +71,6 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/fb.h> #include <plat/usb-control.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index f092b188ab7..bd6d2525deb 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -634,8 +634,8 @@ static void __init mini2440_init(void) s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); - gpio_direction_output(S3C2410_GPG(4), 1); + WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPG(4)); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b868dddcb83..678bbca2b5e 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -47,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/regs-gpio.h> #include <mach/leds-gpio.h> #include <mach/regs-lcd.h> #include <plat/regs-serial.h> @@ -325,8 +324,9 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(0), 1); + /* set initial state of the LED GPIO */ + WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPB(0)); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index a6762aae472..7ee73f27f20 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -42,7 +42,6 @@ #include <asm/mach-types.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-lcd.h> #include <mach/h1940.h> #include <mach/fb.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 03f706dd600..949ae05e07c 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c @@ -77,8 +77,10 @@ static void s3c2410_pm_prepare(void) __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPF(2)); + } if (machine_is_rx1950()) { /* According to S3C2442 user's manual, page 7-17, @@ -103,8 +105,10 @@ static void s3c2410_pm_resume(void) tmp &= S3C2410_GSTATUS2_OFFRESET; __raw_writel(tmp, S3C2410_GSTATUS2); - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); + gpio_free(S3C2410_GPF(2)); + } } struct syscore_ops s3c2410_pm_syscore_ops = { diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d04588506ec..c60f67a75af 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <mach/regs-power.h> -#include <mach/regs-gpioj.h> #include <mach/regs-gpio.h> #include <mach/regs-dsc.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index d4bc7f960bb..6c5f4031ff0 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -39,7 +39,6 @@ #include <plat/regs-serial.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/regs-spi.h> #include <mach/regs-s3c2412.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 6f74118f60c..b0b60a1154d 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -36,7 +36,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c index 5712c85f39b..3d47e023ce9 100644 --- a/arch/arm/mach-s3c24xx/setup-spi.c +++ b/arch/arm/mach-s3c24xx/setup-spi.c @@ -13,20 +13,12 @@ #include <linux/platform_device.h> #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, - .high_speed = 1, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev) +int s3c64xx_spi0_cfg_gpio(void) { /* enable hsspi bit in misccr */ s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1); diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index ed263866367..4e11affce3a 100644 --- a/arch/arm/mach-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c @@ -16,7 +16,6 @@ struct platform_device; /* don't need the contents */ #include <mach/hardware.h> -#include <mach/regs-gpio.h> /** * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems @@ -27,8 +26,5 @@ struct platform_device; /* don't need the contents */ */ void s3c24xx_ts_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); - s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); + s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3)); } |