diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx/include/mach')
43 files changed, 2520 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S new file mode 100644 index 00000000000..b18ac5266df --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -0,0 +1,39 @@ +/* arch/arm/mach-s3c6400/include/mach/debug-macro.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> +#include <plat/regs-serial.h> + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C_PA_UART + ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h new file mode 100644 index 00000000000..0a5d9268a23 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -0,0 +1,127 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/dma.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - DMA support + */ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H __FILE__ + +#define S3C_DMA_CHANNELS (16) + +/* see mach-s3c2410/dma.h for notes on dma channel numbers */ + +/* Note, for the S3C64XX architecture we keep the DMACH_ + * defines in the order they are allocated to [S]DMA0/[S]DMA1 + * so that is easy to do DHACH_ -> DMA controller conversion + */ +enum dma_ch { + /* DMA0/SDMA0 */ + DMACH_UART0 = 0, + DMACH_UART0_SRC2, + DMACH_UART1, + DMACH_UART1_SRC2, + DMACH_UART2, + DMACH_UART2_SRC2, + DMACH_UART3, + DMACH_UART3_SRC2, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_OUT, + DMACH_I2S0_IN, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_HSI_I2SV40_TX, + DMACH_HSI_I2SV40_RX, + + /* DMA1/SDMA1 */ + DMACH_PCM1_TX = 16, + DMACH_PCM1_RX, + DMACH_I2S1_OUT, + DMACH_I2S1_IN, + DMACH_SPI1_TX, + DMACH_SPI1_RX, + DMACH_AC97_PCMOUT, + DMACH_AC97_PCMIN, + DMACH_AC97_MICIN, + DMACH_PWM, + DMACH_IRDA, + DMACH_EXTERNAL, + DMACH_RES1, + DMACH_RES2, + DMACH_SECURITY_RX, /* SDMA1 only */ + DMACH_SECURITY_TX, /* SDMA1 only */ + DMACH_MAX /* the end */ +}; + +static __inline__ bool s3c_dma_has_circular(void) +{ + return true; +} + +#define S3C2410_DMAF_CIRCULAR (1 << 0) + +#include <plat/dma.h> + +#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ + +struct s3c64xx_dma_buff; + +/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor + * @next: Pointer to next buffer in queue or ring. + * @pw: Client provided identifier + * @lli: Pointer to hardware descriptor this buffer is associated with. + * @lli_dma: Hardare address of the descriptor. + */ +struct s3c64xx_dma_buff { + struct s3c64xx_dma_buff *next; + + void *pw; + struct pl080s_lli *lli; + dma_addr_t lli_dma; +}; + +struct s3c64xx_dmac; + +struct s3c2410_dma_chan { + unsigned char number; /* number of this dma channel */ + unsigned char in_use; /* channel allocated */ + unsigned char bit; /* bit for enable/disable/etc */ + unsigned char hw_width; + unsigned char peripheral; + + unsigned int flags; + enum s3c2410_dmasrc source; + + + dma_addr_t dev_addr; + + struct s3c2410_dma_client *client; + struct s3c64xx_dmac *dmac; /* pointer to controller */ + + void __iomem *regs; + + /* cdriver callbacks */ + s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ + s3c2410_dma_opfn_t op_fn; /* channel op callback */ + + /* buffer list and information */ + struct s3c64xx_dma_buff *curr; /* current dma buffer */ + struct s3c64xx_dma_buff *next; /* next buffer to load */ + struct s3c64xx_dma_buff *end; /* end of queue */ + + /* note, when channel is running in circular mode, curr is the + * first buffer enqueued, end is the last and curr is where the + * last buffer-done event is set-at. The buffers are not freed + * and the last buffer hardware descriptor points back to the + * first. + */ +}; + +#include <plat/dma-core.h> + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S new file mode 100644 index 00000000000..dd362604dcc --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S @@ -0,0 +1,18 @@ +/* arch/arm/mach-s3c6400/include/mach/entry-macro.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Low-level IRQ helper macros for the Samsung S3C64XX series + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include <mach/map.h> +#include <mach/irqs.h> + +#include <asm/entry-macro-vic2.S> diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h new file mode 100644 index 00000000000..34212e1a7e8 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h @@ -0,0 +1,48 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank A register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) +#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) +#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) +#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) +#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) + +#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) +#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) + +#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) +#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) + +#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) +#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) + +#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) +#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) + +#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) +#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) + +#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) +#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) + +#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) +#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) + +#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) +#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h new file mode 100644 index 00000000000..7232c037e64 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h @@ -0,0 +1,60 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank B register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) +#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) +#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) +#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) +#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) + +#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) +#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) +#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) +#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) +#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) + +#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) +#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) +#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) +#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) +#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) + +#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) +#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) +#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) +#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) +#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) +#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) + +#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) +#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) +#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) +#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) +#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) + +#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) +#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) +#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) +#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) + +#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) +#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) + +#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) +#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h new file mode 100644 index 00000000000..db189ab1639 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h @@ -0,0 +1,53 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank C register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) +#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) +#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) +#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) +#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) + +#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) +#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) + +#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) +#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) + +#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) +#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) + +#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) +#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) + +#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) +#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) +#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) +#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) + +#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) +#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) +#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) +#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) + +#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) +#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) + +#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) +#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) +#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h new file mode 100644 index 00000000000..1a01cee7aca --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h @@ -0,0 +1,49 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank D register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) +#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) +#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) +#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) +#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) + +#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) +#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) +#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) +#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) + +#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) +#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) +#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) +#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) + +#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) +#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) +#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) +#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) + +#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) +#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) +#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) +#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) + +#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) +#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) +#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) +#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h new file mode 100644 index 00000000000..f057adb627d --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h @@ -0,0 +1,44 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank E register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) +#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) +#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) +#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) +#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) + +#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) +#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) +#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) + +#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) +#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) +#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) + +#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) +#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) +#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) + +#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) +#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) +#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) + +#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) +#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) +#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h new file mode 100644 index 00000000000..62ab8f5e783 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h @@ -0,0 +1,71 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank F register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) +#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) +#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) +#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) +#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) + +#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) +#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) + +#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) +#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) + +#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) +#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) + +#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) +#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) + +#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) +#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) + +#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) +#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) + +#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) +#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) + +#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) +#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) + +#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) +#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) + +#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) +#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) + +#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) +#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) + +#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) +#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) + +#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) +#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) + +#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) +#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) + +#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) +#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) + +#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h new file mode 100644 index 00000000000..b94954af159 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h @@ -0,0 +1,42 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank G register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) +#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) +#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) +#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) +#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) + +#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) +#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) + +#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) +#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) + +#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) +#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) + +#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) +#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) + +#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) +#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) + +#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) +#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h new file mode 100644 index 00000000000..5d75aaad865 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h @@ -0,0 +1,74 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank H register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) +#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) +#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) +#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) +#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) +#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) + +#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) +#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) +#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) + +#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) +#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) +#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) + +#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) +#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) +#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) + +#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) +#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) +#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) + +#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) +#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) +#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) + +#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) +#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) +#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) + +#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) +#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) +#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) +#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) +#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) +#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) + +#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) +#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) +#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) +#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) +#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) +#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) + +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) + +#define S3C64XX_GPH9_OUTPUT (0x01 << 4) +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h new file mode 100644 index 00000000000..4ceaa6098bc --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h @@ -0,0 +1,40 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank I register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) +#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) +#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) +#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) +#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) + +#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPI0_VD0 (0x02 << 0) +#define S3C64XX_GPI1_VD1 (0x02 << 2) +#define S3C64XX_GPI2_VD2 (0x02 << 4) +#define S3C64XX_GPI3_VD3 (0x02 << 6) +#define S3C64XX_GPI4_VD4 (0x02 << 8) +#define S3C64XX_GPI5_VD5 (0x02 << 10) +#define S3C64XX_GPI6_VD6 (0x02 << 12) +#define S3C64XX_GPI7_VD7 (0x02 << 14) +#define S3C64XX_GPI8_VD8 (0x02 << 16) +#define S3C64XX_GPI9_VD9 (0x02 << 18) +#define S3C64XX_GPI10_VD10 (0x02 << 20) +#define S3C64XX_GPI11_VD11 (0x02 << 22) +#define S3C64XX_GPI12_VD12 (0x02 << 24) +#define S3C64XX_GPI13_VD13 (0x02 << 26) +#define S3C64XX_GPI14_VD14 (0x02 << 28) +#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h new file mode 100644 index 00000000000..6f25cd079a4 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h @@ -0,0 +1,36 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank J register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) +#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) +#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) +#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) +#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) + +#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPJ0_VD16 (0x02 << 0) +#define S3C64XX_GPJ1_VD17 (0x02 << 2) +#define S3C64XX_GPJ2_VD18 (0x02 << 4) +#define S3C64XX_GPJ3_VD19 (0x02 << 6) +#define S3C64XX_GPJ4_VD20 (0x02 << 8) +#define S3C64XX_GPJ5_VD21 (0x02 << 10) +#define S3C64XX_GPJ6_VD22 (0x02 << 12) +#define S3C64XX_GPJ7_VD23 (0x02 << 14) +#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) +#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) +#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) +#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h new file mode 100644 index 00000000000..d0aeda1cd9d --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h @@ -0,0 +1,54 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank N register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) +#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) +#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) + +#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPN0_EINT0 (0x02 << 0) +#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) + +#define S3C64XX_GPN1_EINT1 (0x02 << 2) +#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) + +#define S3C64XX_GPN2_EINT2 (0x02 << 4) +#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) + +#define S3C64XX_GPN3_EINT3 (0x02 << 6) +#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) + +#define S3C64XX_GPN4_EINT4 (0x02 << 8) +#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) + +#define S3C64XX_GPN5_EINT5 (0x02 << 10) +#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) + +#define S3C64XX_GPN6_EINT6 (0x02 << 12) +#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) + +#define S3C64XX_GPN7_EINT7 (0x02 << 14) +#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) + +#define S3C64XX_GPN8_EINT8 (0x02 << 16) +#define S3C64XX_GPN9_EINT9 (0x02 << 18) +#define S3C64XX_GPN10_EINT10 (0x02 << 20) +#define S3C64XX_GPN11_EINT11 (0x02 << 22) +#define S3C64XX_GPN12_EINT12 (0x02 << 24) +#define S3C64XX_GPN13_EINT13 (0x02 << 26) +#define S3C64XX_GPN14_EINT14 (0x02 << 28) +#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h new file mode 100644 index 00000000000..21868fa102d --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank O register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) +#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) +#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) +#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) +#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) + +#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) +#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) + +#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) +#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) + +#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) +#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) + +#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) +#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) + +#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) + +#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) + +#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) +#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) + +#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) +#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) + +#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) +#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) + +#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) +#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) + +#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) +#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) + +#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) +#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) + +#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) +#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) + +#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) +#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) + +#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) +#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) + +#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) +#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h new file mode 100644 index 00000000000..46bcfb63b8d --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h @@ -0,0 +1,69 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank P register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) +#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) +#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) +#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) +#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) + +#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) +#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) + +#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) +#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) + +#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) +#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) + +#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) +#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) + +#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) +#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) + +#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) +#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) + +#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) +#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) + +#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) +#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) + +#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) +#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) + +#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) +#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) + +#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) +#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) + +#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) +#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) + +#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) +#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) + +#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) +#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) + +#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) +#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h new file mode 100644 index 00000000000..1712223487b --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank Q register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) +#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) +#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) +#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) +#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) + +#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) +#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) + +#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) +#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) + +#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) + +#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) + +#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) + +#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) + +#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) + +#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) +#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) + +#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) +#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) + diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h new file mode 100644 index 00000000000..0d46e994048 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -0,0 +1,100 @@ +/* arch/arm/mach-s3c6400/include/mach/gpio.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ +#define S3C64XX_GPIO_A_NR (8) +#define S3C64XX_GPIO_B_NR (7) +#define S3C64XX_GPIO_C_NR (8) +#define S3C64XX_GPIO_D_NR (5) +#define S3C64XX_GPIO_E_NR (5) +#define S3C64XX_GPIO_F_NR (16) +#define S3C64XX_GPIO_G_NR (7) +#define S3C64XX_GPIO_H_NR (10) +#define S3C64XX_GPIO_I_NR (16) +#define S3C64XX_GPIO_J_NR (12) +#define S3C64XX_GPIO_K_NR (16) +#define S3C64XX_GPIO_L_NR (15) +#define S3C64XX_GPIO_M_NR (6) +#define S3C64XX_GPIO_N_NR (16) +#define S3C64XX_GPIO_O_NR (16) +#define S3C64XX_GPIO_P_NR (15) +#define S3C64XX_GPIO_Q_NR (9) + +/* GPIO bank numbes */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S3C64XX_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s3c_gpio_number { + S3C64XX_GPIO_A_START = 0, + S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A), + S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B), + S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C), + S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D), + S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E), + S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F), + S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G), + S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H), + S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I), + S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J), + S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K), + S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L), + S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M), + S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N), + S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O), + S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P), +}; + +/* S3C64XX GPIO number definitions. */ + +#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr)) +#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr)) +#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr)) +#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr)) +#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr)) +#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr)) +#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr)) +#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr)) +#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr)) +#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr)) +#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr)) +#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr)) +#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr)) +#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr)) +#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr)) +#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr)) +#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr)) + +/* the end of the S3C64XX specific gpios */ +#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) +#define S3C_GPIO_END S3C64XX_GPIO_END + +/* define the number of gpios we need to the one after the GPQ() range */ +#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) + +#define BOARD_NR_GPIOS 16 + +#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) + +#include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h new file mode 100644 index 00000000000..862d033e57a --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/hardware.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - Hardware support + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h new file mode 100644 index 00000000000..de5716dbbd6 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/io.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s3c64xxinclude/mach/io.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S3C64XX based + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h new file mode 100644 index 00000000000..e9ab4ac0b9a --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -0,0 +1,216 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - IRQ support + */ + +#ifndef __ASM_MACH_S3C64XX_IRQS_H +#define __ASM_MACH_S3C64XX_IRQS_H __FILE__ + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + * + * note, since we're using the VICs, our start must be a + * mulitple of 32 to allow the common code to work + */ + +#define S3C_IRQ_OFFSET (32) + +#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) + +#define IRQ_VIC0_BASE S3C_IRQ(0) +#define IRQ_VIC1_BASE S3C_IRQ(32) + +/* UART interrupts, each UART has 4 intterupts per channel so + * use the space between the ISA and S3C main interrupts. Note, these + * are not in the same order as the S3C24XX series! */ + +#define IRQ_S3CUART_BASE0 (16) +#define IRQ_S3CUART_BASE1 (20) +#define IRQ_S3CUART_BASE2 (24) +#define IRQ_S3CUART_BASE3 (28) + +#define UART_IRQ_RXD (0) +#define UART_IRQ_ERR (1) +#define UART_IRQ_TXD (2) +#define UART_IRQ_MODEM (3) + +#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) + +/* VIC based IRQs */ + +#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x)) +#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x)) + +/* VIC0 */ + +#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0) +#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1) +#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2) +#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3) +#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4) +#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5) +#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5) +#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6) +#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6) +#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7) +#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8) +#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8) +#define IRQ_POST0 S3C64XX_IRQ_VIC0(9) +#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10) +#define IRQ_2D S3C64XX_IRQ_VIC0(11) +#define IRQ_TVENC S3C64XX_IRQ_VIC0(12) +#define IRQ_SCALER S3C64XX_IRQ_VIC0(13) +#define IRQ_BATF S3C64XX_IRQ_VIC0(14) +#define IRQ_JPEG S3C64XX_IRQ_VIC0(15) +#define IRQ_MFC S3C64XX_IRQ_VIC0(16) +#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17) +#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18) +#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19) +#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20) +#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21) +#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22) +#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23) +#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24) +#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25) +#define IRQ_WDT S3C64XX_IRQ_VIC0(26) +#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27) +#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28) +#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29) +#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30) +#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31) + +/* VIC1 */ + +#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0) +#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1) +#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2) +#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3) +#define IRQ_AC97 S3C64XX_IRQ_VIC1(4) +#define IRQ_UART0 S3C64XX_IRQ_VIC1(5) +#define IRQ_UART1 S3C64XX_IRQ_VIC1(6) +#define IRQ_UART2 S3C64XX_IRQ_VIC1(7) +#define IRQ_UART3 S3C64XX_IRQ_VIC1(8) +#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9) +#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10) +#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11) +#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) +#define IRQ_NFC S3C64XX_IRQ_VIC1(13) +#define IRQ_CFCON S3C64XX_IRQ_VIC1(14) +#define IRQ_USBH S3C64XX_IRQ_VIC1(15) +#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) +#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) +#define IRQ_IIC S3C64XX_IRQ_VIC1(18) +#define IRQ_HSItx S3C64XX_IRQ_VIC1(19) +#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20) +#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21) +#define IRQ_MSM S3C64XX_IRQ_VIC1(22) +#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23) +#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24) +#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25) +#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ +#define IRQ_OTG S3C64XX_IRQ_VIC1(26) +#define IRQ_IRDA S3C64XX_IRQ_VIC1(27) +#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28) +#define IRQ_SEC S3C64XX_IRQ_VIC1(29) +#define IRQ_PENDN S3C64XX_IRQ_VIC1(30) +#define IRQ_TC IRQ_PENDN +#define IRQ_ADC S3C64XX_IRQ_VIC1(31) + +#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x)) + +#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0) +#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1) +#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2) +#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3) +#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4) + +/* compatibility for device defines */ + +#define IRQ_IIC1 IRQ_S3C6410_IIC1 + +/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series + * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE + * which we place after the pair of VICs. */ + +#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5) + +#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) +#define IRQ_EINT(x) S3C_EINT(x) +#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0)) + +/* Next the external interrupt groups. These are similar to the IRQ_EINT(x) + * that they are sourced from the GPIO pins but with a different scheme for + * priority and source indication. + * + * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO + * interrupts, but for historical reasons they are kept apart from these + * next interrupts. + * + * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the + * machine specific support files. + */ + +#define IRQ_EINT_GROUP1_NR (15) +#define IRQ_EINT_GROUP2_NR (8) +#define IRQ_EINT_GROUP3_NR (5) +#define IRQ_EINT_GROUP4_NR (14) +#define IRQ_EINT_GROUP5_NR (7) +#define IRQ_EINT_GROUP6_NR (10) +#define IRQ_EINT_GROUP7_NR (16) +#define IRQ_EINT_GROUP8_NR (15) +#define IRQ_EINT_GROUP9_NR (9) + +#define IRQ_EINT_GROUP_BASE S3C_EINT(28) +#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00) +#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) +#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) +#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR) +#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR) +#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) +#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) +#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR) +#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR) + +#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) + +/* Define a group of interrupts for board-specific use (eg, for MFD + * interrupt controllers). */ +#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) + +#ifdef CONFIG_SMDK6410_WM1190_EV1 +#define IRQ_BOARD_NR 64 +#elif defined(CONFIG_SMDK6410_WM1192_EV1) +#define IRQ_BOARD_NR 64 +#else +#define IRQ_BOARD_NR 16 +#endif + +#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) + +/* Set the default NR_IRQS */ + +#define NR_IRQS (IRQ_BOARD_END + 1) + +#endif /* __ASM_MACH_S3C64XX_IRQS_H */ + diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h new file mode 100644 index 00000000000..801c1c0f3a9 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -0,0 +1,107 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/map.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> + +/* + * Post-mux Chip Select Regions Xm0CSn_ + * These may be used by SROM, NAND or CF depending on settings + */ + +#define S3C64XX_PA_XM0CSN0 (0x10000000) +#define S3C64XX_PA_XM0CSN1 (0x18000000) +#define S3C64XX_PA_XM0CSN2 (0x20000000) +#define S3C64XX_PA_XM0CSN3 (0x28000000) +#define S3C64XX_PA_XM0CSN4 (0x30000000) +#define S3C64XX_PA_XM0CSN5 (0x38000000) + +/* HSMMC units */ +#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000)) +#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0) +#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1) +#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2) + +#define S3C_PA_UART (0x7F005000) +#define S3C_PA_UART0 (S3C_PA_UART + 0x00) +#define S3C_PA_UART1 (S3C_PA_UART + 0x400) +#define S3C_PA_UART2 (S3C_PA_UART + 0x800) +#define S3C_PA_UART3 (S3C_PA_UART + 0xC00) +#define S3C_UART_OFFSET (0x400) + +/* See notes on UART VA mapping in debug-macro.S */ +#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET)) + +#define S3C_VA_UART0 S3C_VA_UARTx(0) +#define S3C_VA_UART1 S3C_VA_UARTx(1) +#define S3C_VA_UART2 S3C_VA_UARTx(2) +#define S3C_VA_UART3 S3C_VA_UARTx(3) + +#define S3C64XX_PA_SROM (0x70000000) + +#define S3C64XX_PA_NAND (0x70200000) +#define S3C64XX_PA_FB (0x77100000) +#define S3C64XX_PA_USB_HSOTG (0x7C000000) +#define S3C64XX_PA_WATCHDOG (0x7E004000) +#define S3C64XX_PA_RTC (0x7E005000) +#define S3C64XX_PA_ADC (0x7E00B000) +#define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_AC97 (0x7F001000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) +#define S3C64XX_PA_TIMER (0x7F006000) +#define S3C64XX_PA_IIC0 (0x7F004000) +#define S3C64XX_PA_SPI0 (0x7F00B000) +#define S3C64XX_PA_SPI1 (0x7F00C000) +#define S3C64XX_PA_PCM0 (0x7F009000) +#define S3C64XX_PA_PCM1 (0x7F00A000) +#define S3C64XX_PA_IISV4 (0x7F00D000) +#define S3C64XX_PA_IIC1 (0x7F00F000) + +#define S3C64XX_PA_GPIO (0x7F008000) +#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) +#define S3C64XX_SZ_GPIO SZ_4K + +#define S3C64XX_PA_SDRAM (0x50000000) +#define S3C64XX_PA_VIC0 (0x71200000) +#define S3C64XX_PA_VIC1 (0x71300000) + +#define S3C64XX_PA_MODEM (0x74108000) +#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) + +#define S3C64XX_PA_USBHOST (0x74300000) + +#define S3C64XX_PA_USB_HSPHY (0x7C100000) +#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) + +/* place VICs close together */ +#define VA_VIC0 (S3C_VA_IRQ + 0x00) +#define VA_VIC1 (S3C_VA_IRQ + 0x10000) + +/* compatibiltiy defines. */ +#define S3C_PA_TIMER S3C64XX_PA_TIMER +#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 +#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 +#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2 +#define S3C_PA_IIC S3C64XX_PA_IIC0 +#define S3C_PA_IIC1 S3C64XX_PA_IIC1 +#define S3C_PA_NAND S3C64XX_PA_NAND +#define S3C_PA_FB S3C64XX_PA_FB +#define S3C_PA_USBHOST S3C64XX_PA_USBHOST +#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG +#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY + +#endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h new file mode 100644 index 00000000000..a3ac84a6548 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/memory.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s3c6400/include/mach/memory.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x50000000) + +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h new file mode 100644 index 00000000000..90bbd72fdc4 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/pll.h @@ -0,0 +1,74 @@ +/* arch/arm/plat-s3c64xx/include/plat/pll.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX PLL code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) +#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) +#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) +#define S3C6400_PLL_MDIV_SHIFT (16) +#define S3C6400_PLL_PDIV_SHIFT (8) +#define S3C6400_PLL_SDIV_SHIFT (0) + +#include <asm/div64.h> + +static inline unsigned long s3c6400_get_pll(unsigned long baseclk, + u32 pllcon) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; + pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; + sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1) +#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1) +#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1) +#define S3C6400_EPLL_MDIV_SHIFT (16) +#define S3C6400_EPLL_PDIV_SHIFT (8) +#define S3C6400_EPLL_SDIV_SHIFT (0) +#define S3C6400_EPLL_KDIV_MASK (0xffff) + +static inline unsigned long s3c6400_get_epll(unsigned long baseclk) +{ + unsigned long result; + u32 epll0 = __raw_readl(S3C_EPLL_CON0); + u32 epll1 = __raw_readl(S3C_EPLL_CON1); + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK; + pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK; + sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK; + kdiv = epll1 & S3C6400_EPLL_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h new file mode 100644 index 00000000000..1e9f20f0bb7 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -0,0 +1,98 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/regs-gpio.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + u32 tmp = __raw_readl(S3C_PCLK_GATE); + + /* As a note, since the S3C64XX UARTs generally have multiple + * clock sources, we simply enable PCLK at the moment and hope + * that the resume settings for the UART are suitable for the + * use with PCLK. + */ + + tmp |= S3C_CLKCON_PCLK_UART0; + tmp |= S3C_CLKCON_PCLK_UART1; + tmp |= S3C_CLKCON_PCLK_UART2; + tmp |= S3C_CLKCON_PCLK_UART3; + + __raw_writel(tmp, S3C_PCLK_GATE); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + /* VIC should have already been taken care of */ + + /* clear any pending EINT0 interrupts */ + __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ +} + +/* make these defines, we currently do not have any need to change + * the IRQ wake controls depending on the CPU we are running on */ + +#define s3c_irqwake_eintallow ((1 << 28) - 1) +#define s3c_irqwake_intallow (0) + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + u32 ucon = __raw_readl(regs + S3C2410_UCON); + u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; + u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; + u32 new_ucon; + u32 delta; + + /* S3C64XX UART blocks only support level interrupts, so ensure that + * when we restore unused UART blocks we force the level interrupt + * settigs. */ + save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; + + /* We have a constraint on changing the clock type of the UART + * between UCLKx and PCLK, so ensure that when we restore UCON + * that the CLK field is correctly modified if the bootloader + * has changed anything. + */ + if (ucon_clk != save_clk) { + new_ucon = save->ucon; + delta = ucon_clk ^ save_clk; + + /* change from UCLKx => wrong PCLK, + * either UCLK can be tested for by a bit-test + * with UCLK0 */ + if (ucon_clk & S3C6400_UCON_UCLK0 && + !(save_clk & S3C6400_UCON_UCLK0) && + delta & S3C6400_UCON_PCLK2) { + new_ucon &= ~S3C6400_UCON_UCLK0; + } else if (delta == S3C6400_UCON_PCLK2) { + /* as an precaution, don't change from + * PCLK2 => PCLK or vice-versa */ + new_ucon ^= S3C6400_UCON_PCLK2; + } + + S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", + ucon, new_ucon, save->ucon); + save->ucon = new_ucon; + } +} diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h new file mode 100644 index 00000000000..b25bedee0d5 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h @@ -0,0 +1,56 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64xx - pwm clock and timer support + */ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @tcfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg >= S3C64XX_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << tcfg1; +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 1; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div); +} + +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h new file mode 100644 index 00000000000..3ef62741e5d --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -0,0 +1,156 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_CLOCK_H +#define __PLAT_REGS_CLOCK_H __FILE__ + +#define S3C_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S3C_APLL_LOCK S3C_CLKREG(0x00) +#define S3C_MPLL_LOCK S3C_CLKREG(0x04) +#define S3C_EPLL_LOCK S3C_CLKREG(0x08) +#define S3C_APLL_CON S3C_CLKREG(0x0C) +#define S3C_MPLL_CON S3C_CLKREG(0x10) +#define S3C_EPLL_CON0 S3C_CLKREG(0x14) +#define S3C_EPLL_CON1 S3C_CLKREG(0x18) +#define S3C_CLK_SRC S3C_CLKREG(0x1C) +#define S3C_CLK_DIV0 S3C_CLKREG(0x20) +#define S3C_CLK_DIV1 S3C_CLKREG(0x24) +#define S3C_CLK_DIV2 S3C_CLKREG(0x28) +#define S3C_CLK_OUT S3C_CLKREG(0x2C) +#define S3C_HCLK_GATE S3C_CLKREG(0x30) +#define S3C_PCLK_GATE S3C_CLKREG(0x34) +#define S3C_SCLK_GATE S3C_CLKREG(0x38) +#define S3C_MEM0_GATE S3C_CLKREG(0x3C) + +/* CLKDIV0 */ +#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) +#define S3C6400_CLKDIV0_PCLK_SHIFT (12) +#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) +#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) +#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) +#define S3C6400_CLKDIV0_HCLK_SHIFT (8) +#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) +#define S3C6400_CLKDIV0_MPLL_SHIFT (4) + +#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) +#define S3C6400_CLKDIV0_ARM_SHIFT (0) + +/* HCLK GATE Registers */ +#define S3C_CLKCON_HCLK_3DSE (1<<31) +#define S3C_CLKCON_HCLK_UHOST (1<<29) +#define S3C_CLKCON_HCLK_SECUR (1<<28) +#define S3C_CLKCON_HCLK_SDMA1 (1<<27) +#define S3C_CLKCON_HCLK_SDMA0 (1<<26) +#define S3C_CLKCON_HCLK_IROM (1<<25) +#define S3C_CLKCON_HCLK_DDR1 (1<<24) +#define S3C_CLKCON_HCLK_DDR0 (1<<23) +#define S3C_CLKCON_HCLK_MEM1 (1<<22) +#define S3C_CLKCON_HCLK_MEM0 (1<<21) +#define S3C_CLKCON_HCLK_USB (1<<20) +#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) +#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) +#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) +#define S3C_CLKCON_HCLK_MDP (1<<16) +#define S3C_CLKCON_HCLK_DHOST (1<<15) +#define S3C_CLKCON_HCLK_IHOST (1<<14) +#define S3C_CLKCON_HCLK_DMA1 (1<<13) +#define S3C_CLKCON_HCLK_DMA0 (1<<12) +#define S3C_CLKCON_HCLK_JPEG (1<<11) +#define S3C_CLKCON_HCLK_CAMIF (1<<10) +#define S3C_CLKCON_HCLK_SCALER (1<<9) +#define S3C_CLKCON_HCLK_2D (1<<8) +#define S3C_CLKCON_HCLK_TV (1<<7) +#define S3C_CLKCON_HCLK_POST0 (1<<5) +#define S3C_CLKCON_HCLK_ROT (1<<4) +#define S3C_CLKCON_HCLK_LCD (1<<3) +#define S3C_CLKCON_HCLK_TZIC (1<<2) +#define S3C_CLKCON_HCLK_INTC (1<<1) +#define S3C_CLKCON_HCLK_MFC (1<<0) + +/* PCLK GATE Registers */ +#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) +#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) +#define S3C_CLKCON_PCLK_SKEY (1<<24) +#define S3C_CLKCON_PCLK_CHIPID (1<<23) +#define S3C_CLKCON_PCLK_SPI1 (1<<22) +#define S3C_CLKCON_PCLK_SPI0 (1<<21) +#define S3C_CLKCON_PCLK_HSIRX (1<<20) +#define S3C_CLKCON_PCLK_HSITX (1<<19) +#define S3C_CLKCON_PCLK_GPIO (1<<18) +#define S3C_CLKCON_PCLK_IIC (1<<17) +#define S3C_CLKCON_PCLK_IIS1 (1<<16) +#define S3C_CLKCON_PCLK_IIS0 (1<<15) +#define S3C_CLKCON_PCLK_AC97 (1<<14) +#define S3C_CLKCON_PCLK_TZPC (1<<13) +#define S3C_CLKCON_PCLK_TSADC (1<<12) +#define S3C_CLKCON_PCLK_KEYPAD (1<<11) +#define S3C_CLKCON_PCLK_IRDA (1<<10) +#define S3C_CLKCON_PCLK_PCM1 (1<<9) +#define S3C_CLKCON_PCLK_PCM0 (1<<8) +#define S3C_CLKCON_PCLK_PWM (1<<7) +#define S3C_CLKCON_PCLK_RTC (1<<6) +#define S3C_CLKCON_PCLK_WDT (1<<5) +#define S3C_CLKCON_PCLK_UART3 (1<<4) +#define S3C_CLKCON_PCLK_UART2 (1<<3) +#define S3C_CLKCON_PCLK_UART1 (1<<2) +#define S3C_CLKCON_PCLK_UART0 (1<<1) +#define S3C_CLKCON_PCLK_MFC (1<<0) + +/* SCLK GATE Registers */ +#define S3C_CLKCON_SCLK_UHOST (1<<30) +#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) +#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) +#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) +#define S3C_CLKCON_SCLK_MMC2 (1<<26) +#define S3C_CLKCON_SCLK_MMC1 (1<<25) +#define S3C_CLKCON_SCLK_MMC0 (1<<24) +#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) +#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) +#define S3C_CLKCON_SCLK_SPI1 (1<<21) +#define S3C_CLKCON_SCLK_SPI0 (1<<20) +#define S3C_CLKCON_SCLK_DAC27 (1<<19) +#define S3C_CLKCON_SCLK_TV27 (1<<18) +#define S3C_CLKCON_SCLK_SCALER27 (1<<17) +#define S3C_CLKCON_SCLK_SCALER (1<<16) +#define S3C_CLKCON_SCLK_LCD27 (1<<15) +#define S3C_CLKCON_SCLK_LCD (1<<14) +#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) +#define S3C6410_CLKCON_FIMC (1<<13) +#define S3C_CLKCON_SCLK_POST0_27 (1<<12) +#define S3C6400_CLKCON_SCLK_POST1 (1<<11) +#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) +#define S3C_CLKCON_SCLK_POST0 (1<<10) +#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) +#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) +#define S3C_CLKCON_SCLK_SECUR (1<<7) +#define S3C_CLKCON_SCLK_IRDA (1<<6) +#define S3C_CLKCON_SCLK_UART (1<<5) +#define S3C_CLKCON_SCLK_ONENAND (1<<4) +#define S3C_CLKCON_SCLK_MFC (1<<3) +#define S3C_CLKCON_SCLK_CAM (1<<2) +#define S3C_CLKCON_SCLK_JPEG (1<<1) + +/* CLKSRC */ + +#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) +#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) +#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) +#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) +#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) +#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) +#define S3C6400_CLKSRC_MFC (1 << 4) + +#endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h new file mode 100644 index 00000000000..f56611526c6 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h @@ -0,0 +1,41 @@ +/* + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Copyright 2009 Samsung Electronics Co. + * + * Pawel Osciak <p.osciak@samsung.com> + * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk> + * + * Framebuffer register definitions for Samsung S3C64xx. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MACH_REGS_FB_H +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ + +#include <plat/regs-fb-v4.h> + +/* Palette registers */ +#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2)) +#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2)) +#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2)) +#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4)) +#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4)) + +static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) +{ + switch (window) { + case 0: return WIN0_PAL(reg); + case 1: return WIN1_PAL(reg); + case 2: return WIN2_PAL(reg); + case 3: return WIN3_PAL(reg); + case 4: return WIN4_PAL(reg); + } + + BUG(); +} + +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h new file mode 100644 index 00000000000..82342f6fd27 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIO memory port register definitions + */ + +#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H +#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__ + +#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0) +#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4) + +#define S3C64XX_MEM0CONSLP0 S3C64XX_GPIOREG(0x1C0) +#define S3C64XX_MEM0CONSLP1 S3C64XX_GPIOREG(0x1C4) +#define S3C64XX_MEM1CONSLP S3C64XX_GPIOREG(0x1C8) + +#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0) +#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4) + +#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */ + diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h new file mode 100644 index 00000000000..81f7f6e6832 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h @@ -0,0 +1,187 @@ +/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIO register definitions + */ + +#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H +#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__ + +/* Base addresses for each of the banks */ + +#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg)) + +#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000) +#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020) +#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040) +#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060) +#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080) +#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0) +#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0) +#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0) +#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100) +#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120) +#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800) +#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810) +#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820) +#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830) +#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140) +#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160) +#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180) + +/* SPCON */ + +#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0) + +#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30) +#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30) + +#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28) +#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28) + +#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26) +#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26) + +#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24) +#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24) + +#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22) +#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22) + +#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21) + +#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18) + +#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16) + +#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14) +#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14) +#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14) +#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14) +#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14) + +#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12) +#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12) +#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12) +#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12) +#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12) + +#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8) +#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8) +#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8) +#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8) +#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8) + +#define S3C64XX_SPCON_USBH_DMPD (1 << 7) +#define S3C64XX_SPCON_USBH_DPPD (1 << 6) +#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5) +#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4) +#define S3C64XX_SPCON_USBH_SUSPND (1 << 3) + +#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0) +#define S3C64XX_SPCON_LCD_SEL_SHIFT (0) +#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0) +#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0) +#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0) + + +/* External interrupt registers */ + +#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200) +#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204) +#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208) +#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C) +#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210) + +#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220) +#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224) +#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228) +#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C) +#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230) + +#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240) +#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244) +#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248) +#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C) +#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250) + +#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260) +#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264) +#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268) +#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C) +#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270) + +#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280) +#define S3C64XX_PRIORITY_ARB(x) (1 << (x)) + +#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284) +#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288) + +#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900) +#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904) +#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910) +#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914) +#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918) +#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C) + +#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920) +#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924) + +/* GPIO sleep configuration */ + +#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880) + +#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14) +#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5) + +#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12) +#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12) +#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12) +#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12) + +#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0) +#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0) +#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0) +#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0) + + +#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930) + +#define S3C64XX_SLPEN_USE_xSLP (1 << 0) +#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1) + +#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */ + diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h new file mode 100644 index 00000000000..bcce68a0bb7 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/vic.h> + +#endif /* __ASM_ARCH_6400_REGS_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h new file mode 100644 index 00000000000..49f7759dedf --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h @@ -0,0 +1,31 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - modem block registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C64XX_REGS_MODEM_H +#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__ + +#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x)) + +#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0) +#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4) +#define S3C64XX_MODEM_MIFCON S3C64XX_MODEMREG(0x8) +#define S3C64XX_MODEM_MIFPCON S3C64XX_MODEMREG(0xC) +#define S3C64XX_MODEM_INTCLR S3C64XX_MODEMREG(0x10) +#define S3C64XX_MODEM_DMA_TXADDR S3C64XX_MODEMREG(0x14) +#define S3C64XX_MODEM_DMA_RXADDR S3C64XX_MODEMREG(0x18) + +#define MIFPCON_INT2M_LEVEL (1 << 4) +#define MIFPCON_LCD_BYPASS (1 << 3) + +#endif /* __PLAT_S3C64XX_REGS_MODEM_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h new file mode 100644 index 00000000000..756731b3629 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h @@ -0,0 +1,59 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h + * + * Copyright 2009 Andy Green <andy@warmcat.com> + * + * S3C64XX SROM definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_SROM_H +#define __PLAT_REGS_SROM_H __FILE__ + +#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x)) + +#define S3C64XX_SROM_BW S3C64XX_SROMREG(0) +#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4) +#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8) +#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc) +#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10) +#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14) +#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18) + +/* + * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4 + */ + +#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0 +#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2 +#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3 +#define S3C64XX_SROM_BW__CS_MASK 0xf + +#define S3C64XX_SROM_BW__NCS0__SHIFT 0 +#define S3C64XX_SROM_BW__NCS1__SHIFT 4 +#define S3C64XX_SROM_BW__NCS2__SHIFT 8 +#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc +#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10 + +/* + * applies to same to BCS0 - BCS4 + */ + +#define S3C64XX_SROM_BCX__PMC__SHIFT 0 +#define S3C64XX_SROM_BCX__PMC__MASK 3 +#define S3C64XX_SROM_BCX__TACP__SHIFT 4 +#define S3C64XX_SROM_BCX__TACP__MASK 0xf +#define S3C64XX_SROM_BCX__TCAH__SHIFT 8 +#define S3C64XX_SROM_BCX__TCAH__MASK 0xf +#define S3C64XX_SROM_BCX__TCOH__SHIFT 12 +#define S3C64XX_SROM_BCX__TCOH__MASK 0xf +#define S3C64XX_SROM_BCX__TACC__SHIFT 16 +#define S3C64XX_SROM_BCX__TACC__MASK 0x1f +#define S3C64XX_SROM_BCX__TCOS__SHIFT 24 +#define S3C64XX_SROM_BCX__TCOS__MASK 0xf +#define S3C64XX_SROM_BCX__TACS__SHIFT 28 +#define S3C64XX_SROM_BCX__TACS__MASK 0xf + +#endif /* _PLAT_REGS_SROM_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h new file mode 100644 index 00000000000..69b78d9f83b --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h @@ -0,0 +1,28 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX system register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_SYS_H +#define __PLAT_REGS_SYS_H __FILE__ + +#define S3C_SYSREG(x) (S3C_VA_SYS + (x)) + +#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100) +#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) +#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) + +#define S3C64XX_OTHERS S3C_SYSREG(0x900) + +#define S3C64XX_OTHERS_USBMASK (1 << 16) + +#endif /* _PLAT_REGS_SYS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h new file mode 100644 index 00000000000..270d96ac970 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h @@ -0,0 +1,116 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - syscon power and sleep control registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H +#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__ + +#define S3C64XX_PWR_CFG S3C_SYSREG(0x804) + +#define S3C64XX_PWRCFG_OSC_OTG_DISABLE (1 << 17) +#define S3C64XX_PWRCFG_MMC2_DISABLE (1 << 16) +#define S3C64XX_PWRCFG_MMC1_DISABLE (1 << 15) +#define S3C64XX_PWRCFG_MMC0_DISABLE (1 << 14) +#define S3C64XX_PWRCFG_HSI_DISABLE (1 << 13) +#define S3C64XX_PWRCFG_TS_DISABLE (1 << 12) +#define S3C64XX_PWRCFG_RTC_TICK_DISABLE (1 << 11) +#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE (1 << 10) +#define S3C64XX_PWRCFG_MSM_DISABLE (1 << 9) +#define S3C64XX_PWRCFG_KEY_DISABLE (1 << 8) +#define S3C64XX_PWRCFG_BATF_DISABLE (1 << 7) + +#define S3C64XX_PWRCFG_CFG_WFI_MASK (0x3 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_SHIFT (5) +#define S3C64XX_PWRCFG_CFG_WFI_IGNORE (0x0 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_IDLE (0x1 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_STOP (0x2 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_SLEEP (0x3 << 5) + +#define S3C64XX_PWRCFG_CFG_BATFLT_MASK (0x3 << 3) +#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT (3) +#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE (0x0 << 3) +#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ (0x1 << 3) +#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP (0x3 << 3) + +#define S3C64XX_PWRCFG_CFG_BAT_WAKE (1 << 2) +#define S3C64XX_PWRCFG_OSC27_EN (1 << 0) + +#define S3C64XX_EINT_MASK S3C_SYSREG(0x808) + +#define S3C64XX_NORMAL_CFG S3C_SYSREG(0x810) + +#define S3C64XX_NORMALCFG_IROM_ON (1 << 30) +#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON (1 << 16) +#define S3C64XX_NORMALCFG_DOMAIN_S_ON (1 << 15) +#define S3C64XX_NORMALCFG_DOMAIN_F_ON (1 << 14) +#define S3C64XX_NORMALCFG_DOMAIN_P_ON (1 << 13) +#define S3C64XX_NORMALCFG_DOMAIN_I_ON (1 << 12) +#define S3C64XX_NORMALCFG_DOMAIN_G_ON (1 << 10) +#define S3C64XX_NORMALCFG_DOMAIN_V_ON (1 << 9) + +#define S3C64XX_STOP_CFG S3C_SYSREG(0x814) + +#define S3C64XX_STOPCFG_MEMORY_ARM_ON (1 << 29) +#define S3C64XX_STOPCFG_TOP_MEMORY_ON (1 << 20) +#define S3C64XX_STOPCFG_ARM_LOGIC_ON (1 << 17) +#define S3C64XX_STOPCFG_TOP_LOGIC_ON (1 << 8) +#define S3C64XX_STOPCFG_OSC_EN (1 << 0) + +#define S3C64XX_SLEEP_CFG S3C_SYSREG(0x818) + +#define S3C64XX_SLEEPCFG_OSC_EN (1 << 0) + +#define S3C64XX_STOP_MEM_CFG S3C_SYSREG(0x81c) + +#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN (1 << 6) +#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN (1 << 5) +#define S3C64XX_STOPMEMCFG_OTG_RETAIN (1 << 4) +#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN (1 << 3) +#define S3C64XX_STOPMEMCFG_IROM_RETAIN (1 << 2) +#define S3C64XX_STOPMEMCFG_IRDA_RETAIN (1 << 1) +#define S3C64XX_STOPMEMCFG_NFCON_RETAIN (1 << 0) + +#define S3C64XX_OSC_STABLE S3C_SYSREG(0x824) +#define S3C64XX_PWR_STABLE S3C_SYSREG(0x828) + +#define S3C64XX_WAKEUP_STAT S3C_SYSREG(0x908) + +#define S3C64XX_WAKEUPSTAT_MMC2 (1 << 11) +#define S3C64XX_WAKEUPSTAT_MMC1 (1 << 10) +#define S3C64XX_WAKEUPSTAT_MMC0 (1 << 9) +#define S3C64XX_WAKEUPSTAT_HSI (1 << 8) +#define S3C64XX_WAKEUPSTAT_BATFLT (1 << 6) +#define S3C64XX_WAKEUPSTAT_MSM (1 << 5) +#define S3C64XX_WAKEUPSTAT_KEY (1 << 4) +#define S3C64XX_WAKEUPSTAT_TS (1 << 3) +#define S3C64XX_WAKEUPSTAT_RTC_TICK (1 << 2) +#define S3C64XX_WAKEUPSTAT_RTC_ALARM (1 << 1) +#define S3C64XX_WAKEUPSTAT_EINT (1 << 0) + +#define S3C64XX_BLK_PWR_STAT S3C_SYSREG(0x90c) + +#define S3C64XX_BLKPWRSTAT_G (1 << 7) +#define S3C64XX_BLKPWRSTAT_ETM (1 << 6) +#define S3C64XX_BLKPWRSTAT_S (1 << 5) +#define S3C64XX_BLKPWRSTAT_F (1 << 4) +#define S3C64XX_BLKPWRSTAT_P (1 << 3) +#define S3C64XX_BLKPWRSTAT_I (1 << 2) +#define S3C64XX_BLKPWRSTAT_V (1 << 1) +#define S3C64XX_BLKPWRSTAT_TOP (1 << 0) + +#define S3C64XX_INFORM0 S3C_SYSREG(0xA00) +#define S3C64XX_INFORM1 S3C_SYSREG(0xA04) +#define S3C64XX_INFORM2 S3C_SYSREG(0xA08) +#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C) + +#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h new file mode 100644 index 00000000000..f86958d0535 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h @@ -0,0 +1,36 @@ +/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Header file for s3c6400 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S3C6400 related SoCs */ + +extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c6400_setup_clocks(void); + +extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); + +#ifdef CONFIG_CPU_S3C6400 + +extern int s3c6400_init(void); +extern void s3c6400_init_irq(void); +extern void s3c6400_map_io(void); +extern void s3c6400_init_clocks(int xtal); + +#define s3c6400_init_uarts s3c6400_common_init_uarts + +#else +#define s3c6400_init_clocks NULL +#define s3c6400_init_uarts NULL +#define s3c6400_map_io NULL +#define s3c6400_init NULL +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h new file mode 100644 index 00000000000..24f1141ffcb --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h @@ -0,0 +1,29 @@ +/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Header file for s3c6410 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C6410 + +extern int s3c6410_init(void); +extern void s3c6410_init_irq(void); +extern void s3c6410_map_io(void); +extern void s3c6410_init_clocks(int xtal); + +#define s3c6410_init_uarts s3c6400_common_init_uarts + +#else +#define s3c6410_init_clocks NULL +#define s3c6410_init_uarts NULL +#define s3c6410_map_io NULL +#define s3c6410_init NULL +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h new file mode 100644 index 00000000000..9d0c43b4b68 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_CLKS_H +#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__ + +#define S3C64XX_SPI_SRCCLK_PCLK 0 +#define S3C64XX_SPI_SRCCLK_SPIBUS 1 +#define S3C64XX_SPI_SRCCLK_48M 2 + +#endif /* __S3C64XX_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h new file mode 100644 index 00000000000..2e58cb7a714 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/system.h @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/system.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - system implementation + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +#include <plat/watchdog-reset.h> + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +static void arch_reset(char mode, const char *cmd) +{ + if (mode != 's') + arch_wdt_reset(); + + /* if all else fails, or mode was for soft, jump to 0 */ + cpu_reset(0); +} + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h new file mode 100644 index 00000000000..ebe18a9469b --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/tick.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/tick.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - Timer tick support definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TICK_H +#define __ASM_ARCH_TICK_H __FILE__ + +/* note, the timer interrutps turn up in 2 places, the vic and then + * the timer block. We take the VIC as the base at the moment. + */ +static inline u32 s3c24xx_ostimer_pending(void) +{ + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); + return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); +} + +#define TICK_MAX (0xffffffff) + +#endif /* __ASM_ARCH_6400_TICK_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h new file mode 100644 index 00000000000..fb2e8cd4082 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/timex.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s3c64xx/include/mach/timex.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h new file mode 100644 index 00000000000..c6a82a20bf2 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/uncompress.h @@ -0,0 +1,28 @@ +/* arch/arm/mach-s3c6400/include/mach/uncompress.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ + fifo_mask = S3C2440_UFSTAT_TXMASK; + fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h new file mode 100644 index 00000000000..7411ef3711a --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h + * + * from arch/arm/mach-iop3xx/include/mach/vmalloc.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C6400 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ |