diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx/mach-crag6410.c')
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410.c | 106 |
1 files changed, 26 insertions, 80 deletions
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index f32ec68002e..30afaa537fc 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -47,6 +47,7 @@ #include <mach/regs-sys.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> +#include <mach/crag6410.h> #include <mach/regs-gpio-memport.h> @@ -65,17 +66,6 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8996.h> -#include <sound/wm8962.h> -#include <sound/wm9081.h> - -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) - -#define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) - /* serial port setup */ #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) @@ -287,6 +277,11 @@ static struct platform_device speyside_device = { .id = -1, }; +static struct platform_device lowland_device = { + .name = "lowland", + .id = -1, +}; + static struct platform_device speyside_wm8962_device = { .name = "speyside-wm8962", .id = -1, @@ -295,6 +290,8 @@ static struct platform_device speyside_wm8962_device = { static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), + REGULATOR_SUPPLY("SPKVDDL", "1-001a"), + REGULATOR_SUPPLY("SPKVDDR", "1-001a"), }; static struct regulator_init_data wallvdd_data = { @@ -342,6 +339,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_backlight_device, &speyside_device, &speyside_wm8962_device, + &lowland_device, &wallvdd_device, }; @@ -350,6 +348,12 @@ static struct pca953x_platform_data crag6410_pca_data = { .irq_base = 0, }; +/* VDDARM is controlled by DVS1 connected to GPK(0) */ +static struct wm831x_buckv_pdata vddarm_pdata = { + .dvs_control_src = 1, + .dvs_gpio = S3C64XX_GPK(0), +}; + static struct regulator_consumer_supply vddarm_consumers[] __initdata = { REGULATOR_SUPPLY("vddarm", NULL), }; @@ -365,6 +369,7 @@ static struct regulator_init_data vddarm __initdata = { .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers), .consumer_supplies = vddarm_consumers, .supply_regulator = "WALLVDD", + .driver_data = &vddarm_pdata, }; static struct regulator_init_data vddint __initdata = { @@ -500,6 +505,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = { .backup = &banff_backup_pdata, .gpio_defaults = { + /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */ + [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8, /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/ [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6, /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/ @@ -557,8 +564,12 @@ static struct regulator_init_data pvdd_1v2 __initdata = { }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { + REGULATOR_SUPPLY("LDOVDD", "1-001a"), REGULATOR_SUPPLY("PLLVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD1", "1-001a"), + REGULATOR_SUPPLY("DBVDD2", "1-001a"), + REGULATOR_SUPPLY("DBVDD3", "1-001a"), REGULATOR_SUPPLY("CPVDD", "1-001a"), REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), @@ -611,81 +622,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8996_retune_mobile_config wm8996_retune[] = { - { - .name = "Sub LPF", - .rate = 48000, - .regs = { - 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, - { - .name = "Sub HPF", - .rate = 48000, - .regs = { - 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, -}; - -static struct wm8996_pdata wm8996_pdata __initdata = { - .ldo_ena = S3C64XX_GPN(7), - .gpio_base = CODEC_GPIO_BASE, - .micdet_def = 1, - .inl_mode = WM8996_DIFFERRENTIAL_1, - .inr_mode = WM8996_DIFFERRENTIAL_1, - - .irq_flags = IRQF_TRIGGER_RISING, - - .gpio_default = { - 0x8001, /* GPIO1 == ADCLRCLK1 */ - 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ - 0x0141, /* GPIO3 == HP_SEL */ - 0x0002, /* GPIO4 == IRQ */ - 0x020e, /* GPIO5 == CLKOUT */ - }, - - .retune_mobile_cfgs = wm8996_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), -}; - -static struct wm8962_pdata wm8962_pdata __initdata = { - .gpio_init = { - 0, - WM8962_GPIO_FN_OPCLK, - WM8962_GPIO_FN_DMICCLK, - 0, - 0x8000 | WM8962_GPIO_FN_DMICDAT, - WM8962_GPIO_FN_IRQ, /* Open drain mode */ - }, - .irq_active_low = true, -}; - -static struct wm9081_pdata wm9081_pdata __initdata = { - .irq_high = false, - .irq_cmos = false, -}; - static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, + { I2C_BOARD_INFO("wlf-gf-module", 0x24) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8996", 0x1a), - .platform_data = &wm8996_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, - { I2C_BOARD_INFO("wm9081", 0x6c), - .platform_data = &wm9081_pdata, }, - { I2C_BOARD_INFO("wm8962", 0x1a), - .platform_data = &wm8962_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, }; static void __init crag6410_map_io(void) |