diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx')
-rw-r--r-- | arch/arm/mach-s3c64xx/Kconfig | 29 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/clock.c | 1007 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/common.c | 33 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/common.h | 12 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/dma.c | 13 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/regs-clock.h | 132 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/irq-pm.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-anw6410.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410.c | 15 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-hmt.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-mini6410.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-ncp.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c | 85 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-smartq.c | 12 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-smdk6400.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/pm.c | 21 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/s3c6400.c | 15 | ||||
-rw-r--r-- | arch/arm/mach-s3c64xx/s3c6410.c | 16 |
20 files changed, 195 insertions, 1221 deletions
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 041da517242..2cb8dc55b50 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -3,16 +3,7 @@ # # Licensed under GPLv2 -# temporary until we can eliminate all drivers using it. -config PLAT_S3C64XX - bool - depends on ARCH_S3C64XX - default y - select PM_GENERIC_DOMAINS - select SAMSUNG_WAKEMASK - help - Base platform code for any Samsung S3C64XX device - +if ARCH_S3C64XX # Configuration options for the S3C6410 CPU @@ -306,3 +297,21 @@ config MACH_WLF_CRAGG_6410 select SAMSUNG_GPIO_EXTRA128 help Machine support for the Wolfson Cragganmore S3C6410 variant. + +config MACH_S3C64XX_DT + bool "Samsung S3C6400/S3C6410 machine using Device Tree" + select CLKSRC_OF + select CPU_S3C6400 + select CPU_S3C6410 + select PINCTRL + select PINCTRL_S3C64XX + select USE_OF + help + Machine support for Samsung S3C6400/S3C6410 machines with Device Tree + enabled. + Select this if a fdt blob is available for your S3C64XX SoC based + board. + Note: This is under development and not all peripherals can be + supported with this machine file. + +endif diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 31d0c910127..6faedcffce0 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -12,7 +12,7 @@ obj- := # Core -obj-y += common.o clock.o +obj-y += common.o # Core support @@ -57,3 +57,4 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o +obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c deleted file mode 100644 index c1bcc4a6d3a..00000000000 --- a/arch/arm/mach-s3c64xx/clock.c +++ /dev/null @@ -1,1007 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/clock.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX Base clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pll.h> - -#include "regs-sys.h" - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * ext_xtal_mux for want of an actual name from the manual. -*/ - -static struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", -}; - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux - -#define clk_fout_mpll clk_mpll -#define clk_fout_epll clk_epll - -struct clk clk_h2 = { - .name = "hclk2", - .rate = 0, -}; - -struct clk clk_27m = { - .name = "clk_27m", - .rate = 27000000, -}; - -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S3C64XX_OTHERS); - if (enable) - val |= S3C64XX_OTHERS_USBMASK; - else - val &= ~S3C64XX_OTHERS_USBMASK; - - __raw_writel(val, S3C64XX_OTHERS); - local_irq_restore(flags); - - return 0; -} - -struct clk clk_48m = { - .name = "clk_48m", - .rate = 48000000, - .enable = clk_48m_ctrl, -}; - -struct clk clk_xusbxti = { - .name = "xusbxti", - .rate = 48000000, -}; - -static int inline s3c64xx_gate(void __iomem *reg, - struct clk *clk, - int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); -} - -static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); -} - -int s3c64xx_sclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); -} - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_RTC, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_I2C1, - }, { - .name = "keypad", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, - }, { - .name = "spi", - .devname = "s3c6410-spi.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .devname = "s3c6410-spi.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI1, - }, { - .name = "48m", - .devname = "s3c-sdhci.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.2", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - }, { - .name = "cfcon", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_IHOST, - }, { - .name = "dma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA0, - }, { - .name = "dma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA1, - }, { - .name = "3dse", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_3DSE, - }, { - .name = "hclk_secur", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SECUR, - }, { - .name = "sdma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA1, - }, { - .name = "sdma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA0, - }, { - .name = "hclk_jpeg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_JPEG, - }, { - .name = "camif", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_CAMIF, - }, { - .name = "hclk_scaler", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SCALER, - }, { - .name = "2d", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_2D, - }, { - .name = "tv", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_TV, - }, { - .name = "post0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_POST0, - }, { - .name = "rot", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_ROT, - }, { - .name = "hclk_mfc", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_MFC, - }, { - .name = "pclk_mfc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_MFC, - }, { - .name = "dac27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_DAC27, - }, { - .name = "tv27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_TV27, - }, { - .name = "scaler27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER27, - }, { - .name = "sclk_scaler", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER, - }, { - .name = "post0_27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_POST0_27, - }, { - .name = "secur", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SECUR, - }, { - .name = "sclk_mfc", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MFC, - }, { - .name = "sclk_jpeg", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_JPEG, - }, -}; - -static struct clk clk_48m_spi0 = { - .name = "spi_48m", - .devname = "s3c6410-spi.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, -}; - -static struct clk clk_48m_spi1 = { - .name = "spi_48m", - .devname = "s3c6410-spi.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS0, -}; - -static struct clk clk_i2s1 = { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk clk_i2s2 = { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, -}; -#endif - -static struct clk init_clocks[] = { - { - .name = "lcd", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_LCD, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_UHOST, - }, { - .name = "otg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_USB, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_PWM, - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART3, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, -}; - -static struct clk clk_hsmmc0 = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, -}; - -static struct clk clk_hsmmc1 = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, -}; - -static struct clk clk_hsmmc2 = { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, -}; - -static struct clk clk_fout_apll = { - .name = "fout_apll", -}; - -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -static struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, - .sources = &clk_src_apll, -}; - -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -static struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, - .sources = &clk_src_epll, -}; - -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, - .sources = &clk_src_mpll, -}; - -static unsigned int armclk_mask; - -static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; - - return rate / (clkdiv + 1); -} - -static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - - if (parent < rate) - return parent; - - div = (parent / rate) - 1; - if (div > armclk_mask) - div = armclk_mask; - - return parent / (div + 1); -} - -static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - u32 val; - - if (rate < parent / (armclk_mask + 1)) - return -EINVAL; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - - val = __raw_readl(S3C_CLK_DIV0); - val &= ~armclk_mask; - val |= (div - 1); - __raw_writel(val, S3C_CLK_DIV0); - - return 0; - -} - -static struct clk clk_arm = { - .name = "armclk", - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c64xx_clk_arm_get_rate, - .set_rate = s3c64xx_clk_arm_set_rate, - .round_rate = s3c64xx_clk_arm_round_rate, - }, -}; - -static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) - rate /= 2; - - return rate; -} - -static struct clk_ops clk_dout_ops = { - .get_rate = s3c64xx_clk_doutmpll_get_rate, -}; - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", - .parent = &clk_mout_mpll.clk, - .ops = &clk_dout_ops, -}; - -static struct clk *clkset_spi_mmc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_27m, -}; - -static struct clksrc_sources clkset_spi_mmc = { - .sources = clkset_spi_mmc_list, - .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), -}; - -static struct clk *clkset_irda_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - &clk_27m, -}; - -static struct clksrc_sources clkset_irda = { - .sources = clkset_irda_list, - .nr_sources = ARRAY_SIZE(clkset_irda_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - NULL -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_uhost_list[] = { - &clk_48m, - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_uhost = { - .sources = clkset_uhost_list, - .nr_sources = ARRAY_SIZE(clkset_uhost_list), -}; - -/* The peripheral clocks are all controlled via clocksource followed - * by an optional divider and gate stage. We currently roll this into - * one clock which hides the intermediate clock from the mux. - * - * Note, the JPEG clock can only be an even divider... - * - * The scaler and LCD clocks depend on the S3C64XX version, and also - * have a common parent divisor so are not included here. - */ - -/* clocks that feed other parts of the clock source tree */ - -static struct clk clk_iis_cd0 = { - .name = "iis_cdclk0", -}; - -static struct clk clk_iis_cd1 = { - .name = "iis_cdclk1", -}; - -static struct clk clk_iisv4_cd = { - .name = "iis_cdclk_v4", -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", -}; - -static struct clk *clkset_audio0_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd0, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio0 = { - .sources = clkset_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_audio0_list), -}; - -static struct clk *clkset_audio1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd1, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio1 = { - .sources = clkset_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_audio1_list), -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk *clkset_audio2_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iisv4_cd, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio2 = { - .sources = clkset_audio2_list, - .nr_sources = ARRAY_SIZE(clkset_audio2_list), -}; -#endif - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "usb-bus-host", - .ctrlbit = S3C_CLKCON_SCLK_UHOST, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 }, - .sources = &clkset_uhost, - }, { - .clk = { - .name = "irda-bus", - .ctrlbit = S3C_CLKCON_SCLK_IRDA, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 }, - .sources = &clkset_irda, - }, { - .clk = { - .name = "camera", - .ctrlbit = S3C_CLKCON_SCLK_CAM, - .enable = s3c64xx_sclk_ctrl, - .parent = &clk_h2, - }, - .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, - }, -}; - -/* Where does UCLK0 come from? */ -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, - .sources = &clkset_uart, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.0", - .ctrlbit = S3C_CLKCON_SCLK_MMC0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.1", - .ctrlbit = S3C_CLKCON_SCLK_MMC1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.2", - .ctrlbit = S3C_CLKCON_SCLK_MMC2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.0", - .ctrlbit = S3C_CLKCON_SCLK_SPI0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.1", - .ctrlbit = S3C_CLKCON_SCLK_SPI1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_audio_bus0 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.0", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, - .sources = &clkset_audio0, -}; - -static struct clksrc_clk clk_audio_bus1 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.1", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, - .sources = &clkset_audio1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clksrc_clk clk_audio_bus2 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.2", - .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 }, - .sources = &clkset_audio2, -}; -#endif -/* Clock initialisation code */ - -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_audio_bus0, - &clk_audio_bus1, -}; - -static struct clk *clk_cdev[] = { - &clk_hsmmc0, - &clk_hsmmc1, - &clk_hsmmc2, - &clk_48m_spi0, - &clk_48m_spi1, - &clk_i2s0, - &clk_i2s1, -}; - -static struct clk_lookup s3c64xx_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk), -#ifdef CONFIG_CPU_S3C6410 - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk), -#endif -}; - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -void __init_or_cpufreq s3c64xx_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk2; - unsigned long pclk; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - u32 clkdiv0; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S3C_CLK_DIV0); - printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - /* For now assume the mux always selects the crystal */ - clk_ext_xtal_mux.parent = xtal_clk; - - epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); - mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); - apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); - - fclk = mpll; - - printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", - apll, mpll, epll); - - if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) - /* Synchronous mode */ - hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - else - /* Asynchronous mode */ - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - - hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); - pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); - - printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", - hclk2, hclk, pclk); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - clk_h2.rate = hclk2; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks1[] __initdata = { - &clk_ext_xtal_mux, - &clk_iis_cd0, - &clk_iis_cd1, - &clk_iisv4_cd, - &clk_pcm_cd, - &clk_mout_epll.clk, - &clk_mout_mpll.clk, - &clk_dout_mpll, - &clk_arm, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_27m, - &clk_48m, - &clk_h2, - &clk_xusbxti, -}; - -/** - * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410 - * @xtal: The rate for the clock crystal feeding the PLLs. - * @armclk_divlimit: Divisor mask for ARMCLK. - * - * Register the clocks for the S3C6400 and S3C6410 SoC range, such - * as ARMCLK as well as the necessary parent clocks. - * - * This call does not setup the clocks, which is left to the - * s3c64xx_setup_clocks() call which may be needed by the cpufreq - * or resume code to re-set the clocks if the bootloader has changed - * them. - */ -void __init s3c64xx_register_clocks(unsigned long xtal, - unsigned armclk_divlimit) -{ - unsigned int cnt; - - armclk_mask = armclk_divlimit; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) - s3c_register_clksrc(clksrc_cdev[cnt], 1); - clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); -} diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 73d79cf5e14..7a3ce4c39e5 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -14,9 +14,14 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/clk-provider.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> @@ -38,7 +43,6 @@ #include <mach/regs-gpio.h> #include <plat/cpu.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/pm.h> #include <plat/gpio-cfg.h> @@ -50,6 +54,19 @@ #include "common.h" +/* External clock frequency */ +static unsigned long xtal_f = 12000000, xusbxti_f = 48000000; + +void __init s3c64xx_set_xtal_freq(unsigned long freq) +{ + xtal_f = freq; +} + +void __init s3c64xx_set_xusbxti_freq(unsigned long freq) +{ + xusbxti_f = freq; +} + /* uart registration process */ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) @@ -67,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6400_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, - .init_clocks = s3c6400_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6400_init, .name = name_s3c6400, @@ -75,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6410_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, - .init_clocks = s3c6410_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6410_init, .name = name_s3c6410, @@ -192,6 +207,10 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) static __init int s3c64xx_dev_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + subsys_system_register(&s3c64xx_subsys, NULL); return device_register(&s3c64xx_dev); } @@ -213,8 +232,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { /* * FIXME: there is no better place to put this at the moment - * (samsung_wdt_reset_init needs clocks) + * (s3c64xx_clk_init needs ioremap and must happen before init_time + * samsung_wdt_reset_init needs clocks) */ + s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS); samsung_wdt_reset_init(S3C_VA_WATCHDOG); printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); @@ -391,6 +412,10 @@ static int __init s3c64xx_init_irq_eint(void) { int irq; + /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */ + if (of_have_populated_dt()) + return -ENODEV; + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index e8f990b3766..bd3bd562011 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -22,21 +22,21 @@ void s3c64xx_init_irq(u32 vic0, u32 vic1); void s3c64xx_init_io(struct map_desc *mach_desc, int size); -void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); -void s3c64xx_setup_clocks(void); - void s3c64xx_restart(enum reboot_mode mode, const char *cmd); void s3c64xx_init_late(void); +void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, + unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base); +void s3c64xx_set_xtal_freq(unsigned long freq); +void s3c64xx_set_xusbxti_freq(unsigned long freq); + #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); extern void s3c6400_init_irq(void); extern void s3c6400_map_io(void); -extern void s3c6400_init_clocks(int xtal); #else -#define s3c6400_init_clocks NULL #define s3c6400_map_io NULL #define s3c6400_init NULL #endif @@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal); extern int s3c6410_init(void); extern void s3c6410_init_irq(void); extern void s3c6410_map_io(void); -extern void s3c6410_init_clocks(int xtal); #else -#define s3c6410_init_clocks NULL #define s3c6410_map_io NULL #define s3c6410_init NULL #endif diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 759846c28d1..7e22c211381 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -12,6 +12,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -24,6 +28,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/amba/pl080.h> +#include <linux/of.h> #include <mach/dma.h> #include <mach/map.h> @@ -677,7 +682,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, goto err_map; } - clk_enable(dmac->clk); + clk_prepare_enable(dmac->clk); dmac->regs = regs; dmac->chanbase = chbase; @@ -711,7 +716,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, return 0; err_clk: - clk_disable(dmac->clk); + clk_disable_unprepare(dmac->clk); clk_put(dmac->clk); err_map: iounmap(regs); @@ -726,6 +731,10 @@ static int __init s3c64xx_dma_init(void) { int ret; + /* This driver is not supported when booting with device tree. */ + if (of_have_populated_dt()) + return -ENODEV; + printk(KERN_INFO "%s: Registering DMA channels\n", __func__); dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h index 05332b998ec..4f44aac7709 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -15,145 +15,21 @@ #ifndef __PLAT_REGS_CLOCK_H #define __PLAT_REGS_CLOCK_H __FILE__ +/* + * FIXME: Remove remaining definitions + */ + #define S3C_CLKREG(x) (S3C_VA_SYS + (x)) -#define S3C_APLL_LOCK S3C_CLKREG(0x00) -#define S3C_MPLL_LOCK S3C_CLKREG(0x04) -#define S3C_EPLL_LOCK S3C_CLKREG(0x08) -#define S3C_APLL_CON S3C_CLKREG(0x0C) -#define S3C_MPLL_CON S3C_CLKREG(0x10) -#define S3C_EPLL_CON0 S3C_CLKREG(0x14) -#define S3C_EPLL_CON1 S3C_CLKREG(0x18) -#define S3C_CLK_SRC S3C_CLKREG(0x1C) -#define S3C_CLK_DIV0 S3C_CLKREG(0x20) -#define S3C_CLK_DIV1 S3C_CLKREG(0x24) -#define S3C_CLK_DIV2 S3C_CLKREG(0x28) -#define S3C_CLK_OUT S3C_CLKREG(0x2C) -#define S3C_HCLK_GATE S3C_CLKREG(0x30) #define S3C_PCLK_GATE S3C_CLKREG(0x34) -#define S3C_SCLK_GATE S3C_CLKREG(0x38) -#define S3C_MEM0_GATE S3C_CLKREG(0x3C) #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C) #define S3C_MEM_SYS_CFG S3C_CLKREG(0x120) -/* CLKDIV0 */ -#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) -#define S3C6400_CLKDIV0_PCLK_SHIFT (12) -#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) -#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) -#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) -#define S3C6400_CLKDIV0_HCLK_SHIFT (8) -#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S3C6400_CLKDIV0_MPLL_SHIFT (4) - -#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) -#define S3C6400_CLKDIV0_ARM_SHIFT (0) - -/* HCLK GATE Registers */ -#define S3C_CLKCON_HCLK_3DSE (1<<31) -#define S3C_CLKCON_HCLK_UHOST (1<<29) -#define S3C_CLKCON_HCLK_SECUR (1<<28) -#define S3C_CLKCON_HCLK_SDMA1 (1<<27) -#define S3C_CLKCON_HCLK_SDMA0 (1<<26) -#define S3C_CLKCON_HCLK_IROM (1<<25) -#define S3C_CLKCON_HCLK_DDR1 (1<<24) -#define S3C_CLKCON_HCLK_DDR0 (1<<23) -#define S3C_CLKCON_HCLK_MEM1 (1<<22) -#define S3C_CLKCON_HCLK_MEM0 (1<<21) -#define S3C_CLKCON_HCLK_USB (1<<20) -#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) -#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) -#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) -#define S3C_CLKCON_HCLK_MDP (1<<16) -#define S3C_CLKCON_HCLK_DHOST (1<<15) -#define S3C_CLKCON_HCLK_IHOST (1<<14) -#define S3C_CLKCON_HCLK_DMA1 (1<<13) -#define S3C_CLKCON_HCLK_DMA0 (1<<12) -#define S3C_CLKCON_HCLK_JPEG (1<<11) -#define S3C_CLKCON_HCLK_CAMIF (1<<10) -#define S3C_CLKCON_HCLK_SCALER (1<<9) -#define S3C_CLKCON_HCLK_2D (1<<8) -#define S3C_CLKCON_HCLK_TV (1<<7) -#define S3C_CLKCON_HCLK_POST0 (1<<5) -#define S3C_CLKCON_HCLK_ROT (1<<4) -#define S3C_CLKCON_HCLK_LCD (1<<3) -#define S3C_CLKCON_HCLK_TZIC (1<<2) -#define S3C_CLKCON_HCLK_INTC (1<<1) -#define S3C_CLKCON_HCLK_MFC (1<<0) - /* PCLK GATE Registers */ -#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) -#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) -#define S3C_CLKCON_PCLK_SKEY (1<<24) -#define S3C_CLKCON_PCLK_CHIPID (1<<23) -#define S3C_CLKCON_PCLK_SPI1 (1<<22) -#define S3C_CLKCON_PCLK_SPI0 (1<<21) -#define S3C_CLKCON_PCLK_HSIRX (1<<20) -#define S3C_CLKCON_PCLK_HSITX (1<<19) -#define S3C_CLKCON_PCLK_GPIO (1<<18) -#define S3C_CLKCON_PCLK_IIC (1<<17) -#define S3C_CLKCON_PCLK_IIS1 (1<<16) -#define S3C_CLKCON_PCLK_IIS0 (1<<15) -#define S3C_CLKCON_PCLK_AC97 (1<<14) -#define S3C_CLKCON_PCLK_TZPC (1<<13) -#define S3C_CLKCON_PCLK_TSADC (1<<12) -#define S3C_CLKCON_PCLK_KEYPAD (1<<11) -#define S3C_CLKCON_PCLK_IRDA (1<<10) -#define S3C_CLKCON_PCLK_PCM1 (1<<9) -#define S3C_CLKCON_PCLK_PCM0 (1<<8) -#define S3C_CLKCON_PCLK_PWM (1<<7) -#define S3C_CLKCON_PCLK_RTC (1<<6) -#define S3C_CLKCON_PCLK_WDT (1<<5) #define S3C_CLKCON_PCLK_UART3 (1<<4) #define S3C_CLKCON_PCLK_UART2 (1<<3) #define S3C_CLKCON_PCLK_UART1 (1<<2) #define S3C_CLKCON_PCLK_UART0 (1<<1) -#define S3C_CLKCON_PCLK_MFC (1<<0) - -/* SCLK GATE Registers */ -#define S3C_CLKCON_SCLK_UHOST (1<<30) -#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) -#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) -#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) -#define S3C_CLKCON_SCLK_MMC2 (1<<26) -#define S3C_CLKCON_SCLK_MMC1 (1<<25) -#define S3C_CLKCON_SCLK_MMC0 (1<<24) -#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) -#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) -#define S3C_CLKCON_SCLK_SPI1 (1<<21) -#define S3C_CLKCON_SCLK_SPI0 (1<<20) -#define S3C_CLKCON_SCLK_DAC27 (1<<19) -#define S3C_CLKCON_SCLK_TV27 (1<<18) -#define S3C_CLKCON_SCLK_SCALER27 (1<<17) -#define S3C_CLKCON_SCLK_SCALER (1<<16) -#define S3C_CLKCON_SCLK_LCD27 (1<<15) -#define S3C_CLKCON_SCLK_LCD (1<<14) -#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) -#define S3C6410_CLKCON_FIMC (1<<13) -#define S3C_CLKCON_SCLK_POST0_27 (1<<12) -#define S3C6400_CLKCON_SCLK_POST1 (1<<11) -#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) -#define S3C_CLKCON_SCLK_POST0 (1<<10) -#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) -#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) -#define S3C_CLKCON_SCLK_SECUR (1<<7) -#define S3C_CLKCON_SCLK_IRDA (1<<6) -#define S3C_CLKCON_SCLK_UART (1<<5) -#define S3C_CLKCON_SCLK_ONENAND (1<<4) -#define S3C_CLKCON_SCLK_MFC (1<<3) -#define S3C_CLKCON_SCLK_CAM (1<<2) -#define S3C_CLKCON_SCLK_JPEG (1<<1) - -/* CLKSRC */ - -#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) -#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) -#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) -#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) -#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) -#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) -#define S3C6400_CLKSRC_MFC (1 << 4) /* MEM_SYS_CFG */ #define MEM_SYS_CFG_INDEP_CF 0x4000 diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index c3da1b68d03..1649c0d1c1b 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -12,12 +12,17 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/map.h> @@ -101,6 +106,10 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = { static __init int s3c64xx_syscore_init(void) { + /* Appropriate drivers (pinctrl, uart) handle this when using DT. */ + if (of_have_populated_dt()) + return 0; + register_syscore_ops(&s3c64xx_irq_syscore_ops); return 0; diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 35e3f54574e..d266dd5f706 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = { static void __init anw6410_map_io(void) { s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index eb8e5a1aca4..758e31b2655 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -114,6 +114,7 @@ static struct platform_pwm_backlight_data crag6410_backlight_data = { .max_brightness = 1000, .dft_brightness = 600, .pwm_period_ns = 100000, /* about 1kHz */ + .enable_gpio = -1, }; static struct platform_device crag6410_backlight_device = { @@ -310,10 +311,6 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDDL", "spi0.1"), REGULATOR_SUPPLY("SPKVDDR", "spi0.1"), - REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"), - REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"), - REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"), - REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"), REGULATOR_SUPPLY("DC1VDD", "0-0034"), REGULATOR_SUPPLY("DC2VDD", "0-0034"), @@ -653,14 +650,6 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] = { REGULATOR_SUPPLY("DBVDD3", "spi0.1"), REGULATOR_SUPPLY("LDOVDD", "spi0.1"), REGULATOR_SUPPLY("CPVDD", "spi0.1"), - - REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"), - REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"), - REGULATOR_SUPPLY("CPVDD", "wm5102-codec"), - - REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"), - REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"), - REGULATOR_SUPPLY("CPVDD", "wm5110-codec"), }; static struct regulator_init_data pvdd_1v8 = { @@ -743,7 +732,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = { static void __init crag6410_map_io(void) { s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index f39569e0f2e..614a03a92cf 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -114,6 +114,7 @@ static struct platform_pwm_backlight_data hmt_backlight_data = { .max_brightness = 100 * 256, .dft_brightness = 40 * 256, .pwm_period_ns = 1000000000 / (100 * 256 * 20), + .enable_gpio = -1, .init = hmt_bl_init, .notify = hmt_bl_notify, .exit = hmt_bl_exit, @@ -247,7 +248,7 @@ static struct platform_device *hmt_devices[] __initdata = { static void __init hmt_map_io(void) { s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index fc043e3ecdf..58d46a3d7b7 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -231,7 +231,7 @@ static void __init mini6410_map_io(void) u32 tmp; s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 7e2c3908f1f..2067b0bf55b 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {}; static void __init ncp_map_io(void) { s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c new file mode 100644 index 00000000000..7eb9a10fc1a --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -0,0 +1,85 @@ +/* + * Samsung's S3C64XX flattened device tree enabled machine + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clk-provider.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> + +#include <plat/cpu.h> +#include <plat/watchdog-reset.h> + +#include <mach/map.h> + +#include "common.h" + +/* + * IO mapping for shared system controller IP. + * + * FIXME: Make remaining drivers use dynamic mapping. + */ +static struct map_desc s3c64xx_dt_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init s3c64xx_dt_map_io(void) +{ + debug_ll_io_init(); + iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc)); + + s3c64xx_init_cpu(); + + if (!soc_is_s3c64xx()) + panic("SoC is not S3C64xx!"); +} + +static void __init s3c64xx_dt_init_irq(void) +{ + of_clk_init(NULL); + samsung_wdt_reset_of_init(); + irqchip_init(); +}; + +static void __init s3c64xx_dt_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode != REBOOT_SOFT) + samsung_wdt_reset(); + + /* if all else fails, or mode was for soft, jump to 0 */ + soft_restart(0); +} + +static char const *s3c64xx_dt_compat[] __initdata = { + "samsung,s3c6400", + "samsung,s3c6410", + NULL +}; + +DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)") + /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */ + .dt_compat = s3c64xx_dt_compat, + .map_io = s3c64xx_dt_map_io, + .init_irq = s3c64xx_dt_init_irq, + .init_machine = s3c64xx_dt_init_machine, + .restart = s3c64xx_dt_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 86d980b448f..a6b338fd047 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -151,6 +151,7 @@ static struct platform_pwm_backlight_data smartq_backlight_data = { .max_brightness = 1000, .dft_brightness = 600, .pwm_period_ns = 1000000000 / (1000 * 20), + .enable_gpio = -1, .init = smartq_bl_init, }; @@ -337,13 +338,6 @@ err: return ret; } -static int __init smartq_usb_otg_init(void) -{ - clk_xusbxti.rate = 12000000; - - return 0; -} - static int __init smartq_wifi_init(void) { int ret; @@ -377,7 +371,8 @@ static struct map_desc smartq_iodesc[] __initdata = {}; void __init smartq_map_io(void) { s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); + s3c64xx_set_xusbxti_freq(12000000); s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -399,7 +394,6 @@ void __init smartq_machine_init(void) WARN_ON(smartq_lcd_setup_gpio()); WARN_ON(smartq_power_off_init()); WARN_ON(smartq_usb_host_init()); - WARN_ON(smartq_usb_otg_init()); WARN_ON(smartq_wifi_init()); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index d70c0843aea..27381cfcabb 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {}; static void __init smdk6400_map_io(void) { s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d90b450c564..d5ea938cc9a 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -625,6 +625,7 @@ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { static struct platform_pwm_backlight_data smdk6410_bl_data = { .pwm_id = 1, + .enable_gpio = -1, }; static struct s3c_hsotg_plat smdk6410_hsotg_pdata; @@ -634,7 +635,7 @@ static void __init smdk6410_map_io(void) u32 tmp; s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 6a1f91fea67..8cdb824a3b4 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear) #endif static struct sleep_save core_save[] = { - SAVE_ITEM(S3C_APLL_LOCK), - SAVE_ITEM(S3C_MPLL_LOCK), - SAVE_ITEM(S3C_EPLL_LOCK), - SAVE_ITEM(S3C_CLK_SRC), - SAVE_ITEM(S3C_CLK_DIV0), - SAVE_ITEM(S3C_CLK_DIV1), - SAVE_ITEM(S3C_CLK_DIV2), - SAVE_ITEM(S3C_CLK_OUT), - SAVE_ITEM(S3C_HCLK_GATE), - SAVE_ITEM(S3C_PCLK_GATE), - SAVE_ITEM(S3C_SCLK_GATE), - SAVE_ITEM(S3C_MEM0_GATE), - - SAVE_ITEM(S3C_EPLL_CON1), - SAVE_ITEM(S3C_EPLL_CON0), - SAVE_ITEM(S3C64XX_MEM0DRVCON), SAVE_ITEM(S3C64XX_MEM1DRVCON), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C_APLL_CON), - SAVE_ITEM(S3C_MPLL_CON), -#endif }; static struct sleep_save misc_save[] = { diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 4869714c6f1..3db0c98222f 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -9,6 +9,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -20,6 +24,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -58,12 +63,6 @@ void __init s3c6400_map_io(void) s3c64xx_onenand1_setname("s3c6400-onenand"); } -void __init s3c6400_init_clocks(int xtal) -{ - s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6400_init_irq(void) { /* VIC0 does not have IRQS 5..7, @@ -82,6 +81,10 @@ static struct device s3c6400_dev = { static int __init s3c6400_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6400_subsys, NULL); } diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 31c29fdf180..72b2278953a 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -10,6 +10,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -21,6 +25,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -62,13 +67,6 @@ void __init s3c6410_map_io(void) s3c_cfcon_setname("s3c64xx-pata"); } -void __init s3c6410_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6410_init_irq(void) { /* VIC0 is missing IRQ7, VIC1 is fully populated. */ @@ -86,6 +84,10 @@ static struct device s3c6410_dev = { static int __init s3c6410_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6410_subsys, NULL); } |