diff options
Diffstat (limited to 'arch/arm/mach-s5p64x0/include/mach')
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/debug-macro.S | 32 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/dma.h | 26 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/gpio.h | 132 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/hardware.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/irqs.h | 148 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/map.h | 96 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/pm-core.h | 119 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/regs-clock.h | 98 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/regs-gpio.h | 68 | ||||
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/regs-irq.h | 18 |
10 files changed, 0 insertions, 755 deletions
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S deleted file mode 100644 index 8759e7882bc..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <linux/serial_s3c.h> -#include <plat/map-base.h> -#include <plat/map-s5p.h> - - .macro addruart, rp, rv, tmp - mov \rp, #0xE0000000 - orr \rp, \rp, #0x00100000 - ldr \rp, [\rp, #0x118 ] - and \rp, \rp, #0xff000 - teq \rp, #0x50000 @@ S5P6450 - ldreq \rp, =0xEC800000 - movne \rp, #0xEC000000 @@ S5P6440 - ldrne \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h deleted file mode 100644 index 5a622af461d..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common common DMA API driver for PL330 */ -#include <plat/dma-pl330.h> - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h deleted file mode 100644 index 06cd3c9b16a..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/gpio.h +++ /dev/null @@ -1,132 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -/* GPIO bank sizes */ - -#define S5P6440_GPIO_A_NR (6) -#define S5P6440_GPIO_B_NR (7) -#define S5P6440_GPIO_C_NR (8) -#define S5P6440_GPIO_F_NR (16) -#define S5P6440_GPIO_G_NR (7) -#define S5P6440_GPIO_H_NR (10) -#define S5P6440_GPIO_I_NR (16) -#define S5P6440_GPIO_J_NR (12) -#define S5P6440_GPIO_N_NR (16) -#define S5P6440_GPIO_P_NR (8) -#define S5P6440_GPIO_R_NR (15) - -#define S5P6450_GPIO_A_NR (6) -#define S5P6450_GPIO_B_NR (7) -#define S5P6450_GPIO_C_NR (8) -#define S5P6450_GPIO_D_NR (8) -#define S5P6450_GPIO_F_NR (16) -#define S5P6450_GPIO_G_NR (14) -#define S5P6450_GPIO_H_NR (10) -#define S5P6450_GPIO_I_NR (16) -#define S5P6450_GPIO_J_NR (12) -#define S5P6450_GPIO_K_NR (5) -#define S5P6450_GPIO_N_NR (16) -#define S5P6450_GPIO_P_NR (11) -#define S5P6450_GPIO_Q_NR (14) -#define S5P6450_GPIO_R_NR (15) -#define S5P6450_GPIO_S_NR (8) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P64X0_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p6440_gpio_number { - S5P6440_GPIO_A_START = 0, - S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A), - S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B), - S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C), - S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F), - S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G), - S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H), - S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I), - S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J), - S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N), - S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P), -}; - -enum s5p6450_gpio_number { - S5P6450_GPIO_A_START = 0, - S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A), - S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B), - S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C), - S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D), - S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F), - S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G), - S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H), - S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I), - S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J), - S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K), - S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N), - S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P), - S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q), - S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R), -}; - -/* GPIO number definitions */ - -#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) -#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) -#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) -#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) -#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) -#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) -#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) -#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) -#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) -#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) -#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) - -#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr)) -#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr)) -#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr)) -#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr)) -#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr)) -#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr)) -#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr)) -#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr)) -#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr)) -#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr)) -#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr)) -#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr)) -#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr)) -#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr)) -#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr)) - -/* the end of the S5P64X0 specific gpios */ - -#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) -#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1) - -#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \ - S5P6440_GPIO_END : S5P6450_GPIO_END) - -#define S3C_GPIO_END S5P64X0_GPIO_END - -/* define the number of gpios we need to the one after the last GPIO range */ - -#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h deleted file mode 100644 index d3e87996dd9..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h deleted file mode 100644 index 53982db9d25..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ /dev/null @@ -1,148 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h - * - * Copyright 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0 */ - -#define IRQ_EINT0_3 S5P_IRQ_VIC0(0) -#define IRQ_EINT4_11 S5P_IRQ_VIC0(1) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(2) -#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */ -#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */ -#define IRQ_IIC1 S5P_IRQ_VIC0(5) -#define IRQ_I2SV40 S5P_IRQ_VIC0(6) -#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */ - -#define IRQ_2D S5P_IRQ_VIC0(11) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25) -#define IRQ_WDT S5P_IRQ_VIC0(26) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28) -#define IRQ_DISPCON0 S5P_IRQ_VIC0(29) -#define IRQ_DISPCON1 S5P_IRQ_VIC0(30) -#define IRQ_DISPCON2 S5P_IRQ_VIC0(31) - -/* VIC1 */ - -#define IRQ_EINT12_15 S5P_IRQ_VIC1(0) -#define IRQ_PCM0 S5P_IRQ_VIC1(2) -#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */ -#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */ -#define IRQ_UART0 S5P_IRQ_VIC1(5) -#define IRQ_UART1 S5P_IRQ_VIC1(6) -#define IRQ_UART2 S5P_IRQ_VIC1(7) -#define IRQ_UART3 S5P_IRQ_VIC1(8) -#define IRQ_DMA0 S5P_IRQ_VIC1(9) -#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */ -#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */ -#define IRQ_NFC S5P_IRQ_VIC1(13) -#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */ -#define IRQ_SPI0 S5P_IRQ_VIC1(16) -#define IRQ_SPI1 S5P_IRQ_VIC1(17) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */ -#define IRQ_IIC S5P_IRQ_VIC1(18) -#define IRQ_DISPCON3 S5P_IRQ_VIC1(19) -#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */ -#define IRQ_HSMMC0 S5P_IRQ_VIC1(24) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(25) -#define IRQ_OTG S5P_IRQ_VIC1(26) -#define IRQ_DSI S5P_IRQ_VIC1(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) -#define IRQ_TSI S5P_IRQ_VIC1(29) -#define IRQ_PENDN S5P_IRQ_VIC1(30) -#define IRQ_TC IRQ_PENDN -#define IRQ_ADC S5P_IRQ_VIC1(31) - -/* UART interrupts, S5P6450 has 5 UARTs */ -#define IRQ_S5P_UART_BASE4 (96) -#define IRQ_S5P_UART_BASE5 (100) - -#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR) - -/* S3C compatibilty defines */ -#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 -#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 - -#define IRQ_I2S0 IRQ_I2SV40 - -#define IRQ_LCD_FIFO IRQ_DISPCON0 -#define IRQ_LCD_VSYNC IRQ_DISPCON1 -#define IRQ_LCD_SYSTEM IRQ_DISPCON2 - -/* S5P6450 EINT feature will be added */ - -/* - * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined - * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place - * after the pair of VICs. - */ - -#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) - -#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) - -#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) -/* - * S5P6440 has 0-15 external interrupts in group 0. Only these can be used - * to wake up from sleep. If request is beyond this range, by mistake, a large - * return value for an irq number should be indication of something amiss. - */ -#define S5P_EINT_BASE2 (0xf0000000) - -/* - * Next the external interrupt groups. These are similar to the IRQ_EINT(x) - * that they are sourced from the GPIO pins but with a different scheme for - * priority and source indication. - * - * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO - * interrupts, but for historical reasons they are kept apart from these - * next interrupts. - * - * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the - * machine specific support files. - */ - -/* Actually, #6 and #7 are missing in the EINT_GROUP1 */ -#define IRQ_EINT_GROUP1_NR (15) -#define IRQ_EINT_GROUP2_NR (8) -#define IRQ_EINT_GROUP5_NR (7) -#define IRQ_EINT_GROUP6_NR (10) -/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */ -#define IRQ_EINT_GROUP8_NR (11) - -#define IRQ_EINT_GROUP_BASE S5P_EINT(16) -#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0) -#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) -#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) -#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) -#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) - -#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h deleted file mode 100644 index 50a6e96d638..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/map.h - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P64X0_PA_SDRAM 0x20000000 - -#define S5P64X0_PA_CHIPID 0xE0000000 - -#define S5P64X0_PA_SYSCON 0xE0100000 - -#define S5P64X0_PA_GPIO 0xE0308000 - -#define S5P64X0_PA_VIC0 0xE4000000 -#define S5P64X0_PA_VIC1 0xE4100000 - -#define S5P64X0_PA_SROMC 0xE7000000 - -#define S5P64X0_PA_PDMA 0xE9000000 - -#define S5P64X0_PA_TIMER 0xEA000000 -#define S5P64X0_PA_RTC 0xEA100000 -#define S5P64X0_PA_WDT 0xEA200000 - -#define S5P6440_PA_IIC0 0xEC104000 -#define S5P6440_PA_IIC1 0xEC20F000 -#define S5P6450_PA_IIC0 0xEC100000 -#define S5P6450_PA_IIC1 0xEC200000 - -#define S5P64X0_PA_SPI0 0xEC400000 -#define S5P64X0_PA_SPI1 0xEC500000 - -#define S5P64X0_PA_HSOTG 0xED100000 - -#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) - -#define S5P64X0_PA_FB 0xEE000000 - -#define S5P64X0_PA_I2S 0xF2000000 -#define S5P6450_PA_I2S1 0xF2800000 -#define S5P6450_PA_I2S2 0xF2900000 - -#define S5P64X0_PA_PCM 0xF2100000 - -#define S5P64X0_PA_ADC 0xF3000000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2) -#define S3C_PA_IIC S5P6440_PA_IIC0 -#define S3C_PA_IIC1 S5P6440_PA_IIC1 -#define S3C_PA_RTC S5P64X0_PA_RTC -#define S3C_PA_WDT S5P64X0_PA_WDT -#define S3C_PA_FB S5P64X0_PA_FB -#define S3C_PA_SPI0 S5P64X0_PA_SPI0 -#define S3C_PA_SPI1 S5P64X0_PA_SPI1 - -#define S5P_PA_CHIPID S5P64X0_PA_CHIPID -#define S5P_PA_SROMC S5P64X0_PA_SROMC -#define S5P_PA_SYSCON S5P64X0_PA_SYSCON -#define S5P_PA_TIMER S5P64X0_PA_TIMER - -#define SAMSUNG_PA_ADC S5P64X0_PA_ADC -#define SAMSUNG_PA_TIMER S5P64X0_PA_TIMER - -/* UART */ - -#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) -#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) - -#define S5P_PA_UART0 S5P6450_PA_UART(0) -#define S5P_PA_UART1 S5P6450_PA_UART(1) -#define S5P_PA_UART2 S5P6450_PA_UART(2) -#define S5P_PA_UART3 S5P6450_PA_UART(3) -#define S5P_PA_UART4 S5P6450_PA_UART(4) -#define S5P_PA_UART5 S5P6450_PA_UART(5) - -#define S5P_SZ_UART SZ_256 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h deleted file mode 100644 index 1e0eb65b2b8..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/pm-core.h +++ /dev/null @@ -1,119 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c - * - * Based on PM core support for S3C64XX by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/serial_s3c.h> - -#include <mach/regs-gpio.h> - -static inline void s3c_pm_debug_init_uart(void) -{ - u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK); - - /* - * As a note, since the S5P64X0 UARTs generally have multiple - * clock sources, we simply enable PCLK at the moment and hope - * that the resume settings for the UART are suitable for the - * use with PCLK. - */ - tmp |= S5P64X0_CLK_GATE_PCLK_UART0; - tmp |= S5P64X0_CLK_GATE_PCLK_UART1; - tmp |= S5P64X0_CLK_GATE_PCLK_UART2; - tmp |= S5P64X0_CLK_GATE_PCLK_UART3; - - __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - /* VIC should have already been taken care of */ - - /* clear any pending EINT0 interrupts */ - __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND); -} - -static inline void s3c_pm_arch_stop_clocks(void) { } -static inline void s3c_pm_arch_show_resume_irqs(void) { } - -/* - * make these defines, we currently do not have any need to change - * the IRQ wake controls depending on the CPU we are running on - */ -#define s3c_irqwake_eintallow ((1 << 16) - 1) -#define s3c_irqwake_intallow (~0) - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ - u32 ucon = __raw_readl(regs + S3C2410_UCON); - u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; - u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; - u32 new_ucon; - u32 delta; - - /* - * S5P64X0 UART blocks only support level interrupts, so ensure that - * when we restore unused UART blocks we force the level interrupt - * settings. - */ - save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; - - /* - * We have a constraint on changing the clock type of the UART - * between UCLKx and PCLK, so ensure that when we restore UCON - * that the CLK field is correctly modified if the bootloader - * has changed anything. - */ - if (ucon_clk != save_clk) { - new_ucon = save->ucon; - delta = ucon_clk ^ save_clk; - - /* - * change from UCLKx => wrong PCLK, - * either UCLK can be tested for by a bit-test - * with UCLK0 - */ - if (ucon_clk & S3C6400_UCON_UCLK0 && - !(save_clk & S3C6400_UCON_UCLK0) && - delta & S3C6400_UCON_PCLK2) { - new_ucon &= ~S3C6400_UCON_UCLK0; - } else if (delta == S3C6400_UCON_PCLK2) { - /* - * as a precaution, don't change from - * PCLK2 => PCLK or vice-versa - */ - new_ucon ^= S3C6400_UCON_PCLK2; - } - - S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", - ucon, new_ucon, save->ucon); - save->ucon = new_ucon; - } -} - -static inline void s3c_pm_restored_gpios(void) -{ - /* ensure sleep mode has been cleared from the system */ - __raw_writel(0, S5P64X0_SLPEN); -} - -static inline void samsung_pm_saved_gpios(void) -{ - /* - * turn on the sleep mode and keep it there, as it seems that during - * suspend the xCON registers get re-set and thus you can end up with - * problems between going to sleep and resuming. - */ - __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN); -} diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h deleted file mode 100644 index bd91112c813..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h +++ /dev/null @@ -1,98 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P64X0_APLL_CON S5P_CLKREG(0x0C) -#define S5P64X0_MPLL_CON S5P_CLKREG(0x10) -#define S5P64X0_EPLL_CON S5P_CLKREG(0x14) -#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18) - -#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C) - -#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20) -#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24) -#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28) - -#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30) -#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34) -#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38) -#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C) - -#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40) - -#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44) -#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48) - -#define S5P6450_DPLL_CON S5P_CLKREG(0x50) -#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) - -#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100) -#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) - -#define S5P64X0_SYS_ID S5P_CLKREG(0x118) -#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) - -#define S5P64X0_PWR_CFG S5P_CLKREG(0x804) -#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808) -#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818) -#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828) - -#define S5P64X0_OTHERS S5P_CLKREG(0x900) -#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908) - -#define S5P64X0_INFORM0 S5P_CLKREG(0xA00) - -#define S5P64X0_CLKDIV0_HCLK_SHIFT (8) -#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) - -/* HCLK GATE Registers */ -#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2) -#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2) - -/* PCLK GATE Registers */ -#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4) -#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3) -#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2) -#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1) - -#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15) -#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14) -#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11) -#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10) -#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5) -#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5) - -#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0) - -#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0) - -#define S5P6450_OTHERS_DISABLE_INT (1 << 31) -#define S5P64X0_OTHERS_RET_UART (1 << 26) -#define S5P64X0_OTHERS_RET_MMC1 (1 << 25) -#define S5P64X0_OTHERS_RET_MMC0 (1 << 24) -#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) - -/* Compatibility defines */ - -#define ARM_CLK_DIV S5P64X0_CLK_DIV0 -#define ARM_DIV_RATIO_SHIFT 0 -#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) - -#define S5P_EPLL_CON S5P64X0_EPLL_CON - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h deleted file mode 100644 index cfdfa4fdadf..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIO register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> - -/* Base addresses for each of the banks */ - -#define S5P64X0_GPA_BASE (S5P_VA_GPIO + 0x0000) -#define S5P64X0_GPB_BASE (S5P_VA_GPIO + 0x0020) -#define S5P64X0_GPC_BASE (S5P_VA_GPIO + 0x0040) -#define S5P64X0_GPF_BASE (S5P_VA_GPIO + 0x00A0) -#define S5P64X0_GPG_BASE (S5P_VA_GPIO + 0x00C0) -#define S5P64X0_GPH_BASE (S5P_VA_GPIO + 0x00E0) -#define S5P64X0_GPI_BASE (S5P_VA_GPIO + 0x0100) -#define S5P64X0_GPJ_BASE (S5P_VA_GPIO + 0x0120) -#define S5P64X0_GPN_BASE (S5P_VA_GPIO + 0x0830) -#define S5P64X0_GPP_BASE (S5P_VA_GPIO + 0x0160) -#define S5P64X0_GPR_BASE (S5P_VA_GPIO + 0x0290) - -#define S5P6450_GPD_BASE (S5P_VA_GPIO + 0x0060) -#define S5P6450_GPK_BASE (S5P_VA_GPIO + 0x0140) -#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) -#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) - -#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0) -#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0) -#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0) -#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0) - -#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0) -#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4) -#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0) -#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4) - -#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200) -#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220) -#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240) - -/* External interrupt control registers for group0 */ - -#define EINT0CON0_OFFSET (0x900) -#define EINT0FLTCON0_OFFSET (0x910) -#define EINT0FLTCON1_OFFSET (0x914) -#define EINT0MASK_OFFSET (0x920) -#define EINT0PEND_OFFSET (0x924) - -#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET) -#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET) -#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET) -#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET) -#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET) - -#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930) -#define S5P64X0_SLPEN_USE_xSLP (1 << 0) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h deleted file mode 100644 index d60397d1ff4..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ |