diff options
Diffstat (limited to 'arch/arm/mach-s5p64x0')
31 files changed, 0 insertions, 4494 deletions
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig deleted file mode 100644 index 26003e23796..00000000000 --- a/arch/arm/mach-s5p64x0/Kconfig +++ /dev/null @@ -1,102 +0,0 @@ -# arch/arm/mach-s5p64x0/Kconfig -# -# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -if ARCH_S5P64X0 - -config CPU_S5P6440 - bool - select ARM_AMBA - select PL330_DMA if DMADEVICES - select S5P_SLEEP if PM - select SAMSUNG_WAKEMASK if PM - help - Enable S5P6440 CPU support - -config CPU_S5P6450 - bool - select ARM_AMBA - select PL330_DMA if DMADEVICES - select S5P_SLEEP if PM - select SAMSUNG_WAKEMASK if PM - help - Enable S5P6450 CPU support - -config S5P64X0_SETUP_FB_24BPP - bool - help - Common setup code for S5P64X0 based boards with a LCD display - through RGB interface. - -config S5P64X0_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5P64X0_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations - -config S5P64X0_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -# machine support - -config MACH_SMDK6440 - bool "SMDK6440" - select CPU_S5P6440 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5P64X0_SETUP_FB_24BPP - select S5P64X0_SETUP_I2C1 - select S5P64X0_SETUP_SDHCI_GPIO - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6440 - -config MACH_SMDK6450 - bool "SMDK6450" - select CPU_S5P6450 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5P64X0_SETUP_FB_24BPP - select S5P64X0_SETUP_I2C1 - select S5P64X0_SETUP_SDHCI_GPIO - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6450 - -menu "Use 8-bit SDHCI bus width" - -config S5P64X0_SD_CH1_8BIT - bool "SDHCI Channel 1 (Slot 1)" - depends on MACH_SMDK6450 || MACH_SMDK6440 - help - Support SDHCI Channel 1 8-bit bus. - If selected, Channel 2 is disabled. - -endmenu - -endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile deleted file mode 100644 index 12bb951187a..00000000000 --- a/arch/arm/mach-s5p64x0/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# arch/arm/mach-s5p64x0/Makefile -# -# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core - -obj-y += common.o clock.o -obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o -obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o - -obj-$(CONFIG_PM) += pm.o irq-pm.o - -obj-y += dma.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o -obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o - -# device support - -obj-y += dev-audio.o - -obj-y += setup-i2c0.o -obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o -obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5p64x0/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot deleted file mode 100644 index 79ece4055b0..00000000000 --- a/arch/arm/mach-s5p64x0/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c deleted file mode 100644 index ae34a1d5e10..00000000000 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ /dev/null @@ -1,632 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P6440 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "clock.h" -#include "common.h" - -static u32 epll_div[][5] = { - { 36000000, 0, 48, 1, 4 }, - { 48000000, 0, 32, 1, 3 }, - { 60000000, 0, 40, 1, 3 }, - { 72000000, 0, 48, 1, 3 }, - { 84000000, 0, 28, 1, 2 }, - { 96000000, 0, 32, 1, 2 }, - { 32768000, 45264, 43, 1, 4 }, - { 45158000, 6903, 30, 1, 3 }, - { 49152000, 50332, 32, 1, 3 }, - { 67738000, 10398, 45, 1, 3 }, - { 73728000, 9961, 49, 1, 3 } -}; - -static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P64X0_EPLL_CON); - epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P64X0_EPLL_CON); - __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); - - printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", - clk->rate, rate); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6440_epll_ops = { - .get_rate = s5p_epll_get_rate, - .set_rate = s5p6440_epll_set_rate, -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - .parent = &clk_armclk.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, -}; -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "clk_hclk_low", - }, - .sources = &clkset_hclk_low, - .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "clk_pclk_low", - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_hclk.clk, - .enable = s5p64x0_mem_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "post", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 5) - }, { - .name = "2d", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "dma", - .devname = "dma-pl330", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "otg", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 20) - }, { - .name = "irom", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "lcd", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "hclk_fimgvg", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "tsi", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "watchdog", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "rtc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "timers", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "pcm", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "adc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "s5p64x0-spi.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "spi", - .devname = "s5p64x0-spi.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "gps", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "dsim", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "etm", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 29), - }, { - .name = "dmc0", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 30), - }, { - .name = "pclk_fimgvg", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 31), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.0", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.1", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.2", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 29), - }, -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "intc", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "mem", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "gpio", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 18), - }, -}; - -static struct clk clk_iis_cd_v40 = { - .name = "iis_cdclk_v40", -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", -}; - -static struct clk *clkset_group1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_group1 = { - .sources = clkset_group1_list, - .nr_sources = ARRAY_SIZE(clkset_group1_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio = { - .sources = clkset_audio_list, - .nr_sources = ARRAY_SIZE(clkset_audio_list), -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_post", - .ctrlbit = (1 << 10), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .ctrlbit = (1 << 1), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimgvg", - .ctrlbit = (1 << 2), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, - }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 26), -}; - -static struct clksrc_clk clk_audio_bus2 = { - .clk = { - .name = "sclk_audio2", - .devname = "samsung-i2s.0", - .ctrlbit = (1 << 11), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_audio, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.0", - .ctrlbit = (1 << 20), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.1", - .ctrlbit = (1 << 21), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -static struct clk *clk_cdev[] = { - &clk_i2s0, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_audio_bus2, -}; - -static struct clk_lookup s5p6440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus2.clk), -}; - -void __init_or_cpufreq s5p6440_setup_clocks(void) -{ - struct clk *xtal_clk; - - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned int ptr; - - /* Set S5P6440 functions for clk_fout_epll */ - - clk_fout_epll.enable = s5p_epll_enable; - clk_fout_epll.ops = &s5p6440_epll_ops; - - clk_48m.enable = s5p64x0_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), - __raw_readl(S5P64X0_EPLL_CON_K)); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - - printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -void __init s5p6440_register_clocks(void) -{ - int ptr; - unsigned int cnt; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup)); - - s3c24xx_register_clock(&dummy_apb_pclk); -} diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c deleted file mode 100644 index 0b3ca2ed53e..00000000000 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ /dev/null @@ -1,701 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P6450 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "clock.h" -#include "common.h" - -static struct clksrc_clk clk_mout_dpll = { - .clk = { - .name = "mout_dpll", - }, - .sources = &clk_src_dpll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 }, -}; - -static u32 epll_div[][5] = { - { 133000000, 27307, 55, 2, 2 }, - { 100000000, 43691, 41, 2, 2 }, - { 480000000, 0, 80, 2, 0 }, -}; - -static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P64X0_EPLL_CON); - epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P64X0_EPLL_CON); - __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); - - printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", - clk->rate, rate); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6450_epll_ops = { - .get_rate = s5p_epll_get_rate, - .set_rate = s5p6450_epll_set_rate, -}; - -static struct clksrc_clk clk_dout_epll = { - .clk = { - .name = "dout_epll", - .parent = &clk_mout_epll.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 }, -}; - -static struct clksrc_clk clk_mout_hclk_sel = { - .clk = { - .name = "mout_hclk_sel", - }, - .sources = &clkset_hclk_low, - .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 }, -}; - -static struct clk *clkset_hclk_list[] = { - &clk_mout_hclk_sel.clk, - &clk_armclk.clk, -}; - -static struct clksrc_sources clkset_hclk = { - .sources = clkset_hclk_list, - .nr_sources = ARRAY_SIZE(clkset_hclk_list), -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - }, - .sources = &clkset_hclk, - .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, -}; -static struct clksrc_clk clk_dout_pwm_ratio0 = { - .clk = { - .name = "clk_dout_pwm_ratio0", - .parent = &clk_mout_hclk_sel.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_to_wdt_pwm = { - .clk = { - .name = "clk_pclk_to_wdt_pwm", - .parent = &clk_dout_pwm_ratio0.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 }, -}; - -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "clk_hclk_low", - }, - .sources = &clkset_hclk_low, - .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "clk_pclk_low", - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_off[] = { - { - .name = "usbhost", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "dma", - .devname = "dma-pl330", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "usbotg", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "watchdog", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "rtc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "adc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "s5p64x0-spi.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "spi", - .devname = "s5p64x0-spi.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "dmc0", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 30), - } -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "intc", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "mem", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "timers", - .parent = &clk_pclk_to_wdt_pwm.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "gpio", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 18), - }, -}; - -static struct clk *clkset_uart_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_mali_list[] = { - &clk_mout_epll.clk, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_mali = { - .sources = clkset_mali_list, - .nr_sources = ARRAY_SIZE(clkset_mali_list), -}; - -static struct clk *clkset_group2_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, - &clk_ext_xtal_mux, -}; - -static struct clksrc_sources clkset_group2 = { - .sources = clkset_group2_list, - .nr_sources = ARRAY_SIZE(clkset_group2_list), -}; - -static struct clk *clkset_dispcon_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, - &clk_ext_xtal_mux, - &clk_mout_dpll.clk, -}; - -static struct clksrc_sources clkset_dispcon = { - .sources = clkset_dispcon_list, - .nr_sources = ARRAY_SIZE(clkset_dispcon_list), -}; - -static struct clk *clkset_hsmmc44_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, - &clk_ext_xtal_mux, - &s5p_clk_27m, - &clk_48m, -}; - -static struct clksrc_sources clkset_hsmmc44 = { - .sources = clkset_hsmmc44_list, - .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list), -}; - -static struct clk *clkset_sclk_audio0_list[] = { - [0] = &clk_dout_epll.clk, - [1] = &clk_dout_mpll.clk, - [2] = &clk_ext_xtal_mux, - [3] = NULL, - [4] = NULL, -}; - -static struct clksrc_sources clkset_sclk_audio0 = { - .sources = clkset_sclk_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), -}; - -static struct clksrc_clk clk_sclk_audio0 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.0", - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 8), - .parent = &clk_dout_epll.clk, - }, - .sources = &clkset_sclk_audio0, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_fimc", - .ctrlbit = (1 << 10), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "aclk_mali", - .ctrlbit = (1 << 2), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_mali, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_2d", - .ctrlbit = (1 << 12), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_mali, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_usi", - .ctrlbit = (1 << 7), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_camif", - .ctrlbit = (1 << 6), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .ctrlbit = (1 << 1), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_dispcon, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_hsmmc44", - .ctrlbit = (1 << 30), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_hsmmc44, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 }, - }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.0", - .ctrlbit = (1 << 20), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.1", - .ctrlbit = (1 << 21), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 26), -}; - -static struct clk clk_i2s1 = { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 15), -}; - -static struct clk clk_i2s2 = { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 16), -}; - -static struct clk *clk_cdev[] = { - &clk_i2s0, - &clk_i2s1, - &clk_i2s2, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_audio0, -}; - -static struct clk_lookup s5p6450_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_sclk_audio0.clk), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), -}; - -/* Clock initialization code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_dout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_mout_hclk_sel, - &clk_dout_pwm_ratio0, - &clk_pclk_to_wdt_pwm, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -void __init_or_cpufreq s5p6450_setup_clocks(void) -{ - struct clk *xtal_clk; - - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long dpll; - unsigned int ptr; - - /* Set S5P6450 functions for clk_fout_epll */ - - clk_fout_epll.enable = s5p_epll_enable; - clk_fout_epll.ops = &s5p6450_epll_ops; - - clk_48m.enable = s5p64x0_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), - __raw_readl(S5P64X0_EPLL_CON_K)); - dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON), - __raw_readl(S5P6450_DPLL_CON_K), pll_4650c); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_dpll.rate = dpll; - - printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz, D=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll), - print_mhz(dpll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -void __init s5p6450_register_clocks(void) -{ - int ptr; - unsigned int cnt; - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup)); - - s3c24xx_register_clock(&dummy_apb_pclk); -} diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c deleted file mode 100644 index 57e718957ef..00000000000 --- a/arch/arm/mach-s5p64x0/clock.c +++ /dev/null @@ -1,236 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "common.h" - -struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 }, -}; - -struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 }, -}; - -enum perf_level { - L0 = 532*1000, - L1 = 266*1000, - L2 = 133*1000, -}; - -static const u32 clock_table[][3] = { - /*{ARM_CLK, DIVarm, DIVhclk}*/ - {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, - {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, - {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, -}; - -static unsigned long s5p64x0_armclk_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; - - return rate / (clkdiv + 1); -} - -static unsigned long s5p64x0_armclk_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 iter; - - for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (rate > clock_table[iter][0]) - return clock_table[iter-1][0]; - } - - return clock_table[ARRAY_SIZE(clock_table) - 1][0]; -} - -static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 round_tmp; - u32 iter; - u32 clk_div0_tmp; - u32 cur_rate = clk->ops->get_rate(clk); - unsigned long flags; - - round_tmp = clk->ops->round_rate(clk, rate); - if (round_tmp == cur_rate) - return 0; - - - for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (round_tmp == clock_table[iter][0]) - break; - } - - if (iter >= ARRAY_SIZE(clock_table)) - iter = ARRAY_SIZE(clock_table) - 1; - - local_irq_save(flags); - if (cur_rate > round_tmp) { - /* Frequency Down */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P64X0_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - - } else { - /* Frequency Up */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P64X0_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - } - local_irq_restore(flags); - - clk->rate = clock_table[iter][0]; - - return 0; -} - -static struct clk_ops s5p64x0_clkarm_ops = { - .get_rate = s5p64x0_armclk_get_rate, - .set_rate = s5p64x0_armclk_set_rate, - .round_rate = s5p64x0_armclk_round_rate, -}; - -struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .id = 1, - .parent = &clk_mout_apll.clk, - .ops = &s5p64x0_clkarm_ops, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 }, -}; - -struct clksrc_clk clk_dout_mpll = { - .clk = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_mpll.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_hclk_low_list[] = { - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -struct clksrc_sources clkset_hclk_low = { - .sources = clkset_hclk_low_list, - .nr_sources = ARRAY_SIZE(clkset_hclk_low_list), -}; - -int s5p64x0_pclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable); -} - -int s5p64x0_hclk0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable); -} - -int s5p64x0_hclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable); -} - -int s5p64x0_sclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable); -} - -int s5p64x0_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable); -} - -int s5p64x0_mem_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable); -} - -int s5p64x0_clk48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5P64X0_OTHERS); - if (enable) - val |= S5P64X0_OTHERS_USB_SIG_MASK; - else - val &= ~S5P64X0_OTHERS_USB_SIG_MASK; - - __raw_writel(val, S5P64X0_OTHERS); - - local_irq_restore(flags); - - return 0; -} diff --git a/arch/arm/mach-s5p64x0/clock.h b/arch/arm/mach-s5p64x0/clock.h deleted file mode 100644 index 28b8e3c6bd2..00000000000 --- a/arch/arm/mach-s5p64x0/clock.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p64x0 clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_S5P64X0_CLOCK_H -#define __MACH_S5P64X0_CLOCK_H __FILE__ - -#include <linux/clk.h> - -extern struct clksrc_clk clk_mout_apll; -extern struct clksrc_clk clk_mout_mpll; -extern struct clksrc_clk clk_mout_epll; - -extern int s5p64x0_epll_enable(struct clk *clk, int enable); -extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); - -extern struct clksrc_clk clk_armclk; -extern struct clksrc_clk clk_dout_mpll; - -extern struct clksrc_sources clkset_hclk_low; - -extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); -extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable); -extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable); -extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable); -extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable); -extern int s5p64x0_mem_ctrl(struct clk *clk, int enable); - -extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable); - -#endif /* __MACH_S5P64X0_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c deleted file mode 100644 index 9a43be002d7..00000000000 --- a/arch/arm/mach-s5p64x0/common.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Codes for S5P64X0 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <clocksource/samsung_pwm.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/reboot.h> - -#include <asm/irq.h> -#include <asm/proc-fns.h> -#include <asm/system_misc.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/map.h> -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/pm.h> -#include <plat/sdhci.h> -#include <plat/adc-core.h> -#include <plat/fb-core.h> -#include <plat/spi-core.h> -#include <plat/gpio-cfg.h> -#include <plat/pwm-core.h> -#include <plat/regs-irqtype.h> -#include <plat/watchdog-reset.h> - -#include "common.h" - -static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6450[] = "S5P6450"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S5P6440_CPU_ID, - .idmask = S5P64XX_CPU_MASK, - .map_io = s5p6440_map_io, - .init_clocks = s5p6440_init_clocks, - .init_uarts = s5p6440_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6440, - }, { - .idcode = S5P6450_CPU_ID, - .idmask = S5P64XX_CPU_MASK, - .map_io = s5p6450_map_io, - .init_clocks = s5p6450_init_clocks, - .init_uarts = s5p6450_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6450, - }, -}; - -/* Initial IO mappings */ - -static struct map_desc s5p64x0_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S5P64X0_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S5P64X0_PA_WDT), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5P64X0_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc s5p6440_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc s5p6450_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), - .length = SZ_512K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART + SZ_512K, - .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void s5p64x0_idle(void) -{ - unsigned long val; - - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); - - cpu_do_idle(); -} - -static struct samsung_pwm_variant s5p64x0_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = 0, -}; - -void __init samsung_set_timer_source(unsigned int event, unsigned int source) -{ - s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); -} - -void __init samsung_timer_init(void) -{ - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, - IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, - }; - - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &s5p64x0_pwm_variant); -} - -/* - * s5p64x0_map_io - * - * register the standard CPU IO areas - */ - -void __init s5p64x0_init_io(struct map_desc *mach_desc, int size) -{ - /* initialize the io descriptors we need for initialization */ - iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); - if (mach_desc) - iotable_init(mach_desc, size); - - /* detect cpu id and rev. */ - s5p_init_cpu(S5P64X0_SYS_ID); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); - samsung_wdt_reset_init(S3C_VA_WATCHDOG); - - samsung_pwm_set_platdata(&s5p64x0_pwm_variant); -} - -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - s3c_fb_setname("s5p64x0-fb"); - s3c64xx_spi_setname("s5p64x0-spi"); - - s5p64x0_default_sdhci0(); - s5p64x0_default_sdhci1(); - s5p6440_default_sdhci2(); - - iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - s3c_fb_setname("s5p64x0-fb"); - s3c64xx_spi_setname("s5p64x0-spi"); - - s5p64x0_default_sdhci0(); - s5p64x0_default_sdhci1(); - s5p6450_default_sdhci2(); - - iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); -} -#endif - -/* - * s5p64x0_init_clocks - * - * register and setup the CPU clocks - */ -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6440_register_clocks(); - s5p6440_setup_clocks(); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6450_register_clocks(); - s5p6450_setup_clocks(); -} -#endif - -/* - * s5p64x0_init_irq - * - * register the CPU interrupts - */ -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_init_irq(void) -{ - /* S5P6440 supports 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] - * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] - */ - vic[0] = 0xff800ae7; - vic[1] = 0xffbf23e5; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_init_irq(void) -{ - /* S5P6450 supports only 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] - * VIC1 is missing IRQ VIC1[12, 14, 23] - */ - vic[0] = 0xff9f1fff; - vic[1] = 0xff7fafff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} -#endif - -struct bus_type s5p64x0_subsys = { - .name = "s5p64x0-core", - .dev_name = "s5p64x0-core", -}; - -static struct device s5p64x0_dev = { - .bus = &s5p64x0_subsys, -}; - -static int __init s5p64x0_core_init(void) -{ - return subsys_system_register(&s5p64x0_subsys, NULL); -} -core_initcall(s5p64x0_core_init); - -int __init s5p64x0_init(void) -{ - printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); - - /* set idle function */ - arm_pm_idle = s5p64x0_idle; - - return device_register(&s5p64x0_dev); -} - -/* uart registration process */ -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - int uart; - - for (uart = 0; uart < no; uart++) { - s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); - s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; - } - - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} -#endif - -#define eint_offset(irq) ((irq) - IRQ_EINT(0)) - -static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = eint_offset(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - if (offs > 15) - return -EINVAL; - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs / 2) * 4; - mask = 0x7 << shift; - - ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P64X0_EINT0CON0); - - /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ - if (soc_is_s5p6450()) - s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); - - return 0; -} - -/* - * s5p64x0_irq_demux_eint - * - * This function demuxes the IRQ from the group0 external interrupts, - * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into - * the specific handlers s5p64x0_irq_demux_eintX_Y. - */ -static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end) -{ - u32 status = __raw_readl(S5P64X0_EINT0PEND); - u32 mask = __raw_readl(S5P64X0_EINT0MASK); - unsigned int irq; - - status &= ~mask; - status >>= start; - status &= (1 << (end - start + 1)) - 1; - - for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { - if (status & 1) - generic_handle_irq(irq); - status >>= 1; - } -} - -static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(0, 3); -} - -static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(4, 11); -} - -static void s5p64x0_irq_demux_eint12_15(unsigned int irq, - struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(12, 15); -} - -static int s5p64x0_alloc_gc(void) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE, - S5P_VA_GPIO, handle_level_irq); - if (!gc) { - printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0" - "external interrupts failed\n", __func__); - return -EINVAL; - } - - ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; - ct->chip.irq_set_wake = s3c_irqext_wake; - ct->regs.ack = EINT0PEND_OFFSET; - ct->regs.mask = EINT0MASK_OFFSET; - irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); - return 0; -} - -static int __init s5p64x0_init_irq_eint(void) -{ - int ret = s5p64x0_alloc_gc(); - irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3); - irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11); - irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15); - - return ret; -} -arch_initcall(s5p64x0_init_irq_eint); - -void s5p64x0_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode != REBOOT_SOFT) - samsung_wdt_reset(); - - soft_restart(0); -} diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h deleted file mode 100644 index cbe7f3d731d..00000000000 --- a/arch/arm/mach-s5p64x0/common.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S5P64X0 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H -#define __ARCH_ARM_MACH_S5P64X0_COMMON_H - -#include <linux/reboot.h> - -void s5p6440_init_irq(void); -void s5p6450_init_irq(void); -void s5p64x0_init_io(struct map_desc *mach_desc, int size); - -void s5p6440_register_clocks(void); -void s5p6440_setup_clocks(void); - -void s5p6450_register_clocks(void); -void s5p6450_setup_clocks(void); - -void s5p64x0_restart(enum reboot_mode mode, const char *cmd); -extern int s5p64x0_init(void); - -#ifdef CONFIG_CPU_S5P6440 - -extern void s5p6440_map_io(void); -extern void s5p6440_init_clocks(int xtal); - -extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6440_init_clocks NULL -#define s5p6440_init_uarts NULL -#define s5p6440_map_io NULL -#endif - -#ifdef CONFIG_CPU_S5P6450 - -extern void s5p6450_map_io(void); -extern void s5p6450_init_clocks(int xtal); - -extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6450_init_clocks NULL -#define s5p6450_init_uarts NULL -#define s5p6450_map_io NULL -#endif - -#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */ diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c deleted file mode 100644 index 723d4773c32..00000000000 --- a/arch/arm/mach-s5p64x0/dev-audio.c +++ /dev/null @@ -1,176 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6440_cfg_i2s(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s5p6440_i2s_pdata = { - .cfg_gpio = s5p6440_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN, - }, - }, -}; - -static struct resource s5p64x0_i2s0_resource[] = { - [0] = DEFINE_RES_MEM(S5P64X0_PA_I2S, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), -}; - -struct platform_device s5p6440_device_iis = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource), - .resource = s5p64x0_i2s0_resource, - .dev = { - .platform_data = &s5p6440_i2s_pdata, - }, -}; - -static int s5p6450_cfg_i2s(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5)); - break; - case 1: - s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5)); - break; - case 2: - s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s5p6450_i2s0_pdata = { - .cfg_gpio = s5p6450_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN, - }, - }, -}; - -struct platform_device s5p6450_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource), - .resource = s5p64x0_i2s0_resource, - .dev = { - .platform_data = &s5p6450_i2s0_pdata, - }, -}; - -static struct s3c_audio_pdata s5p6450_i2s_pdata = { - .cfg_gpio = s5p6450_cfg_i2s, -}; - -static struct resource s5p6450_i2s1_resource[] = { - [0] = DEFINE_RES_MEM(S5P6450_PA_I2S1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), -}; - -struct platform_device s5p6450_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6450_i2s1_resource), - .resource = s5p6450_i2s1_resource, - .dev = { - .platform_data = &s5p6450_i2s_pdata, - }, -}; - -static struct resource s5p6450_i2s2_resource[] = { - [0] = DEFINE_RES_MEM(S5P6450_PA_I2S2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), -}; - -struct platform_device s5p6450_device_iis2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(s5p6450_i2s2_resource), - .resource = s5p6450_i2s2_resource, - .dev = { - .platform_data = &s5p6450_i2s_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2)); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s5p6440_pcm_pdata = { - .cfg_gpio = s5p6440_pcm_cfg_gpio, -}; - -static struct resource s5p6440_pcm0_resource[] = { - [0] = DEFINE_RES_MEM(S5P64X0_PA_PCM, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), -}; - -struct platform_device s5p6440_device_pcm = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), - .resource = s5p6440_pcm0_resource, - .dev = { - .platform_data = &s5p6440_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c deleted file mode 100644 index 9c4ce085f58..00000000000 --- a/arch/arm/mach-s5p64x0/dma.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/dma.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl330.h> - -#include <asm/irq.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/regs-clock.h> -#include <mach/dma.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/irqs.h> - -static u8 s5p6440_pdma_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_TX, - DMACH_I2S0_RX, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_MAX, - DMACH_MAX, - DMACH_MAX, - DMACH_MAX, - DMACH_SPI1_TX, - DMACH_SPI1_RX, -}; - -static struct dma_pl330_platdata s5p6440_pdma_pdata = { - .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), - .peri_id = s5p6440_pdma_peri, -}; - -static u8 s5p6450_pdma_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_TX, - DMACH_I2S0_RX, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_PCM1_TX, - DMACH_PCM1_RX, - DMACH_PCM2_TX, - DMACH_PCM2_RX, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_USI_TX, - DMACH_USI_RX, - DMACH_MAX, - DMACH_I2S1_TX, - DMACH_I2S1_RX, - DMACH_I2S2_TX, - DMACH_I2S2_RX, - DMACH_PWM, - DMACH_UART5_RX, - DMACH_UART5_TX, -}; - -static struct dma_pl330_platdata s5p6450_pdma_pdata = { - .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), - .peri_id = s5p6450_pdma_peri, -}; - -static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, - S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL); - -static int __init s5p64x0_dma_init(void) -{ - if (soc_is_s5p6450()) { - dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); - s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata; - } else { - dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); - s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata; - } - - amba_device_register(&s5p64x0_pdma_device, &iomem_resource); - - return 0; -} -arch_initcall(s5p64x0_dma_init); diff --git a/arch/arm/mach-s5p64x0/i2c.h b/arch/arm/mach-s5p64x0/i2c.h deleted file mode 100644 index 1e5bb4ea200..00000000000 --- a/arch/arm/mach-s5p64x0/i2c.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 I2C configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev); -extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev); - -extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev); -extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S deleted file mode 100644 index 8759e7882bc..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <linux/serial_s3c.h> -#include <plat/map-base.h> -#include <plat/map-s5p.h> - - .macro addruart, rp, rv, tmp - mov \rp, #0xE0000000 - orr \rp, \rp, #0x00100000 - ldr \rp, [\rp, #0x118 ] - and \rp, \rp, #0xff000 - teq \rp, #0x50000 @@ S5P6450 - ldreq \rp, =0xEC800000 - movne \rp, #0xEC000000 @@ S5P6440 - ldrne \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h deleted file mode 100644 index 5a622af461d..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common common DMA API driver for PL330 */ -#include <plat/dma-pl330.h> - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h deleted file mode 100644 index 06cd3c9b16a..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/gpio.h +++ /dev/null @@ -1,132 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -/* GPIO bank sizes */ - -#define S5P6440_GPIO_A_NR (6) -#define S5P6440_GPIO_B_NR (7) -#define S5P6440_GPIO_C_NR (8) -#define S5P6440_GPIO_F_NR (16) -#define S5P6440_GPIO_G_NR (7) -#define S5P6440_GPIO_H_NR (10) -#define S5P6440_GPIO_I_NR (16) -#define S5P6440_GPIO_J_NR (12) -#define S5P6440_GPIO_N_NR (16) -#define S5P6440_GPIO_P_NR (8) -#define S5P6440_GPIO_R_NR (15) - -#define S5P6450_GPIO_A_NR (6) -#define S5P6450_GPIO_B_NR (7) -#define S5P6450_GPIO_C_NR (8) -#define S5P6450_GPIO_D_NR (8) -#define S5P6450_GPIO_F_NR (16) -#define S5P6450_GPIO_G_NR (14) -#define S5P6450_GPIO_H_NR (10) -#define S5P6450_GPIO_I_NR (16) -#define S5P6450_GPIO_J_NR (12) -#define S5P6450_GPIO_K_NR (5) -#define S5P6450_GPIO_N_NR (16) -#define S5P6450_GPIO_P_NR (11) -#define S5P6450_GPIO_Q_NR (14) -#define S5P6450_GPIO_R_NR (15) -#define S5P6450_GPIO_S_NR (8) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P64X0_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p6440_gpio_number { - S5P6440_GPIO_A_START = 0, - S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A), - S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B), - S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C), - S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F), - S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G), - S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H), - S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I), - S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J), - S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N), - S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P), -}; - -enum s5p6450_gpio_number { - S5P6450_GPIO_A_START = 0, - S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A), - S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B), - S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C), - S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D), - S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F), - S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G), - S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H), - S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I), - S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J), - S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K), - S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N), - S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P), - S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q), - S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R), -}; - -/* GPIO number definitions */ - -#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) -#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) -#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) -#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) -#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) -#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) -#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) -#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) -#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) -#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) -#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) - -#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr)) -#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr)) -#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr)) -#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr)) -#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr)) -#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr)) -#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr)) -#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr)) -#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr)) -#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr)) -#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr)) -#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr)) -#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr)) -#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr)) -#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr)) - -/* the end of the S5P64X0 specific gpios */ - -#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) -#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1) - -#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \ - S5P6440_GPIO_END : S5P6450_GPIO_END) - -#define S3C_GPIO_END S5P64X0_GPIO_END - -/* define the number of gpios we need to the one after the last GPIO range */ - -#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h deleted file mode 100644 index d3e87996dd9..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h deleted file mode 100644 index 53982db9d25..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ /dev/null @@ -1,148 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h - * - * Copyright 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0 */ - -#define IRQ_EINT0_3 S5P_IRQ_VIC0(0) -#define IRQ_EINT4_11 S5P_IRQ_VIC0(1) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(2) -#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */ -#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */ -#define IRQ_IIC1 S5P_IRQ_VIC0(5) -#define IRQ_I2SV40 S5P_IRQ_VIC0(6) -#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */ - -#define IRQ_2D S5P_IRQ_VIC0(11) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25) -#define IRQ_WDT S5P_IRQ_VIC0(26) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28) -#define IRQ_DISPCON0 S5P_IRQ_VIC0(29) -#define IRQ_DISPCON1 S5P_IRQ_VIC0(30) -#define IRQ_DISPCON2 S5P_IRQ_VIC0(31) - -/* VIC1 */ - -#define IRQ_EINT12_15 S5P_IRQ_VIC1(0) -#define IRQ_PCM0 S5P_IRQ_VIC1(2) -#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */ -#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */ -#define IRQ_UART0 S5P_IRQ_VIC1(5) -#define IRQ_UART1 S5P_IRQ_VIC1(6) -#define IRQ_UART2 S5P_IRQ_VIC1(7) -#define IRQ_UART3 S5P_IRQ_VIC1(8) -#define IRQ_DMA0 S5P_IRQ_VIC1(9) -#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */ -#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */ -#define IRQ_NFC S5P_IRQ_VIC1(13) -#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */ -#define IRQ_SPI0 S5P_IRQ_VIC1(16) -#define IRQ_SPI1 S5P_IRQ_VIC1(17) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */ -#define IRQ_IIC S5P_IRQ_VIC1(18) -#define IRQ_DISPCON3 S5P_IRQ_VIC1(19) -#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */ -#define IRQ_HSMMC0 S5P_IRQ_VIC1(24) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(25) -#define IRQ_OTG S5P_IRQ_VIC1(26) -#define IRQ_DSI S5P_IRQ_VIC1(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) -#define IRQ_TSI S5P_IRQ_VIC1(29) -#define IRQ_PENDN S5P_IRQ_VIC1(30) -#define IRQ_TC IRQ_PENDN -#define IRQ_ADC S5P_IRQ_VIC1(31) - -/* UART interrupts, S5P6450 has 5 UARTs */ -#define IRQ_S5P_UART_BASE4 (96) -#define IRQ_S5P_UART_BASE5 (100) - -#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR) - -/* S3C compatibilty defines */ -#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 -#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 - -#define IRQ_I2S0 IRQ_I2SV40 - -#define IRQ_LCD_FIFO IRQ_DISPCON0 -#define IRQ_LCD_VSYNC IRQ_DISPCON1 -#define IRQ_LCD_SYSTEM IRQ_DISPCON2 - -/* S5P6450 EINT feature will be added */ - -/* - * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined - * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place - * after the pair of VICs. - */ - -#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) - -#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) - -#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) -/* - * S5P6440 has 0-15 external interrupts in group 0. Only these can be used - * to wake up from sleep. If request is beyond this range, by mistake, a large - * return value for an irq number should be indication of something amiss. - */ -#define S5P_EINT_BASE2 (0xf0000000) - -/* - * Next the external interrupt groups. These are similar to the IRQ_EINT(x) - * that they are sourced from the GPIO pins but with a different scheme for - * priority and source indication. - * - * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO - * interrupts, but for historical reasons they are kept apart from these - * next interrupts. - * - * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the - * machine specific support files. - */ - -/* Actually, #6 and #7 are missing in the EINT_GROUP1 */ -#define IRQ_EINT_GROUP1_NR (15) -#define IRQ_EINT_GROUP2_NR (8) -#define IRQ_EINT_GROUP5_NR (7) -#define IRQ_EINT_GROUP6_NR (10) -/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */ -#define IRQ_EINT_GROUP8_NR (11) - -#define IRQ_EINT_GROUP_BASE S5P_EINT(16) -#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0) -#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) -#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) -#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) -#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) - -#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h deleted file mode 100644 index 50a6e96d638..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/map.h - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P64X0_PA_SDRAM 0x20000000 - -#define S5P64X0_PA_CHIPID 0xE0000000 - -#define S5P64X0_PA_SYSCON 0xE0100000 - -#define S5P64X0_PA_GPIO 0xE0308000 - -#define S5P64X0_PA_VIC0 0xE4000000 -#define S5P64X0_PA_VIC1 0xE4100000 - -#define S5P64X0_PA_SROMC 0xE7000000 - -#define S5P64X0_PA_PDMA 0xE9000000 - -#define S5P64X0_PA_TIMER 0xEA000000 -#define S5P64X0_PA_RTC 0xEA100000 -#define S5P64X0_PA_WDT 0xEA200000 - -#define S5P6440_PA_IIC0 0xEC104000 -#define S5P6440_PA_IIC1 0xEC20F000 -#define S5P6450_PA_IIC0 0xEC100000 -#define S5P6450_PA_IIC1 0xEC200000 - -#define S5P64X0_PA_SPI0 0xEC400000 -#define S5P64X0_PA_SPI1 0xEC500000 - -#define S5P64X0_PA_HSOTG 0xED100000 - -#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) - -#define S5P64X0_PA_FB 0xEE000000 - -#define S5P64X0_PA_I2S 0xF2000000 -#define S5P6450_PA_I2S1 0xF2800000 -#define S5P6450_PA_I2S2 0xF2900000 - -#define S5P64X0_PA_PCM 0xF2100000 - -#define S5P64X0_PA_ADC 0xF3000000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2) -#define S3C_PA_IIC S5P6440_PA_IIC0 -#define S3C_PA_IIC1 S5P6440_PA_IIC1 -#define S3C_PA_RTC S5P64X0_PA_RTC -#define S3C_PA_WDT S5P64X0_PA_WDT -#define S3C_PA_FB S5P64X0_PA_FB -#define S3C_PA_SPI0 S5P64X0_PA_SPI0 -#define S3C_PA_SPI1 S5P64X0_PA_SPI1 - -#define S5P_PA_CHIPID S5P64X0_PA_CHIPID -#define S5P_PA_SROMC S5P64X0_PA_SROMC -#define S5P_PA_SYSCON S5P64X0_PA_SYSCON -#define S5P_PA_TIMER S5P64X0_PA_TIMER - -#define SAMSUNG_PA_ADC S5P64X0_PA_ADC -#define SAMSUNG_PA_TIMER S5P64X0_PA_TIMER - -/* UART */ - -#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) -#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) - -#define S5P_PA_UART0 S5P6450_PA_UART(0) -#define S5P_PA_UART1 S5P6450_PA_UART(1) -#define S5P_PA_UART2 S5P6450_PA_UART(2) -#define S5P_PA_UART3 S5P6450_PA_UART(3) -#define S5P_PA_UART4 S5P6450_PA_UART(4) -#define S5P_PA_UART5 S5P6450_PA_UART(5) - -#define S5P_SZ_UART SZ_256 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h deleted file mode 100644 index 1e0eb65b2b8..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/pm-core.h +++ /dev/null @@ -1,119 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c - * - * Based on PM core support for S3C64XX by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/serial_s3c.h> - -#include <mach/regs-gpio.h> - -static inline void s3c_pm_debug_init_uart(void) -{ - u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK); - - /* - * As a note, since the S5P64X0 UARTs generally have multiple - * clock sources, we simply enable PCLK at the moment and hope - * that the resume settings for the UART are suitable for the - * use with PCLK. - */ - tmp |= S5P64X0_CLK_GATE_PCLK_UART0; - tmp |= S5P64X0_CLK_GATE_PCLK_UART1; - tmp |= S5P64X0_CLK_GATE_PCLK_UART2; - tmp |= S5P64X0_CLK_GATE_PCLK_UART3; - - __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - /* VIC should have already been taken care of */ - - /* clear any pending EINT0 interrupts */ - __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND); -} - -static inline void s3c_pm_arch_stop_clocks(void) { } -static inline void s3c_pm_arch_show_resume_irqs(void) { } - -/* - * make these defines, we currently do not have any need to change - * the IRQ wake controls depending on the CPU we are running on - */ -#define s3c_irqwake_eintallow ((1 << 16) - 1) -#define s3c_irqwake_intallow (~0) - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ - u32 ucon = __raw_readl(regs + S3C2410_UCON); - u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; - u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; - u32 new_ucon; - u32 delta; - - /* - * S5P64X0 UART blocks only support level interrupts, so ensure that - * when we restore unused UART blocks we force the level interrupt - * settings. - */ - save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; - - /* - * We have a constraint on changing the clock type of the UART - * between UCLKx and PCLK, so ensure that when we restore UCON - * that the CLK field is correctly modified if the bootloader - * has changed anything. - */ - if (ucon_clk != save_clk) { - new_ucon = save->ucon; - delta = ucon_clk ^ save_clk; - - /* - * change from UCLKx => wrong PCLK, - * either UCLK can be tested for by a bit-test - * with UCLK0 - */ - if (ucon_clk & S3C6400_UCON_UCLK0 && - !(save_clk & S3C6400_UCON_UCLK0) && - delta & S3C6400_UCON_PCLK2) { - new_ucon &= ~S3C6400_UCON_UCLK0; - } else if (delta == S3C6400_UCON_PCLK2) { - /* - * as a precaution, don't change from - * PCLK2 => PCLK or vice-versa - */ - new_ucon ^= S3C6400_UCON_PCLK2; - } - - S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", - ucon, new_ucon, save->ucon); - save->ucon = new_ucon; - } -} - -static inline void s3c_pm_restored_gpios(void) -{ - /* ensure sleep mode has been cleared from the system */ - __raw_writel(0, S5P64X0_SLPEN); -} - -static inline void samsung_pm_saved_gpios(void) -{ - /* - * turn on the sleep mode and keep it there, as it seems that during - * suspend the xCON registers get re-set and thus you can end up with - * problems between going to sleep and resuming. - */ - __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN); -} diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h deleted file mode 100644 index bd91112c813..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h +++ /dev/null @@ -1,98 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P64X0_APLL_CON S5P_CLKREG(0x0C) -#define S5P64X0_MPLL_CON S5P_CLKREG(0x10) -#define S5P64X0_EPLL_CON S5P_CLKREG(0x14) -#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18) - -#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C) - -#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20) -#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24) -#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28) - -#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30) -#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34) -#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38) -#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C) - -#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40) - -#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44) -#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48) - -#define S5P6450_DPLL_CON S5P_CLKREG(0x50) -#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) - -#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100) -#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) - -#define S5P64X0_SYS_ID S5P_CLKREG(0x118) -#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) - -#define S5P64X0_PWR_CFG S5P_CLKREG(0x804) -#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808) -#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818) -#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828) - -#define S5P64X0_OTHERS S5P_CLKREG(0x900) -#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908) - -#define S5P64X0_INFORM0 S5P_CLKREG(0xA00) - -#define S5P64X0_CLKDIV0_HCLK_SHIFT (8) -#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) - -/* HCLK GATE Registers */ -#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2) -#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2) - -/* PCLK GATE Registers */ -#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4) -#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3) -#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2) -#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1) - -#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15) -#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14) -#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11) -#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10) -#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5) -#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5) - -#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0) - -#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0) - -#define S5P6450_OTHERS_DISABLE_INT (1 << 31) -#define S5P64X0_OTHERS_RET_UART (1 << 26) -#define S5P64X0_OTHERS_RET_MMC1 (1 << 25) -#define S5P64X0_OTHERS_RET_MMC0 (1 << 24) -#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) - -/* Compatibility defines */ - -#define ARM_CLK_DIV S5P64X0_CLK_DIV0 -#define ARM_DIV_RATIO_SHIFT 0 -#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) - -#define S5P_EPLL_CON S5P64X0_EPLL_CON - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h deleted file mode 100644 index cfdfa4fdadf..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIO register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> - -/* Base addresses for each of the banks */ - -#define S5P64X0_GPA_BASE (S5P_VA_GPIO + 0x0000) -#define S5P64X0_GPB_BASE (S5P_VA_GPIO + 0x0020) -#define S5P64X0_GPC_BASE (S5P_VA_GPIO + 0x0040) -#define S5P64X0_GPF_BASE (S5P_VA_GPIO + 0x00A0) -#define S5P64X0_GPG_BASE (S5P_VA_GPIO + 0x00C0) -#define S5P64X0_GPH_BASE (S5P_VA_GPIO + 0x00E0) -#define S5P64X0_GPI_BASE (S5P_VA_GPIO + 0x0100) -#define S5P64X0_GPJ_BASE (S5P_VA_GPIO + 0x0120) -#define S5P64X0_GPN_BASE (S5P_VA_GPIO + 0x0830) -#define S5P64X0_GPP_BASE (S5P_VA_GPIO + 0x0160) -#define S5P64X0_GPR_BASE (S5P_VA_GPIO + 0x0290) - -#define S5P6450_GPD_BASE (S5P_VA_GPIO + 0x0060) -#define S5P6450_GPK_BASE (S5P_VA_GPIO + 0x0140) -#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) -#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) - -#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0) -#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0) -#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0) -#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0) - -#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0) -#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4) -#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0) -#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4) - -#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200) -#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220) -#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240) - -/* External interrupt control registers for group0 */ - -#define EINT0CON0_OFFSET (0x900) -#define EINT0FLTCON0_OFFSET (0x910) -#define EINT0FLTCON1_OFFSET (0x914) -#define EINT0MASK_OFFSET (0x920) -#define EINT0PEND_OFFSET (0x924) - -#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET) -#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET) -#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET) -#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET) -#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET) - -#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930) -#define S5P64X0_SLPEN_USE_xSLP (1 << 0) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h deleted file mode 100644 index d60397d1ff4..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c deleted file mode 100644 index 2ed921e095d..00000000000 --- a/arch/arm/mach-s5p64x0/irq-pm.c +++ /dev/null @@ -1,98 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/irq-pm.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Interrupt handling Power Management - * - * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/syscore_ops.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <plat/pm.h> - -#include <mach/regs-gpio.h> - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S5P64X0_EINT0CON0), - SAVE_ITEM(S5P64X0_EINT0FLTCON0), - SAVE_ITEM(S5P64X0_EINT0FLTCON1), - SAVE_ITEM(S5P64X0_EINT0MASK), -}; - -static struct irq_grp_save { - u32 con; - u32 fltcon; - u32 mask; -} eint_grp_save[4]; - -#ifdef CONFIG_SERIAL_SAMSUNG -static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; -#endif - -static int s5p64x0_irq_pm_suspend(void) -{ - struct irq_grp_save *grp = eint_grp_save; - int i; - - S3C_PMDBG("%s: suspending IRQs\n", __func__); - - s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - -#ifdef CONFIG_SERIAL_SAMSUNG - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) - irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); -#endif - - for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { - grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4)); - grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4)); - grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4)); - } - - return 0; -} - -static void s5p64x0_irq_pm_resume(void) -{ - struct irq_grp_save *grp = eint_grp_save; - int i; - - S3C_PMDBG("%s: resuming IRQs\n", __func__); - - s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - -#ifdef CONFIG_SERIAL_SAMSUNG - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) - __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); -#endif - - for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { - __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4)); - __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4)); - __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4)); - } - - S3C_PMDBG("%s: IRQ configuration restored\n", __func__); -} - -static struct syscore_ops s5p64x0_irq_syscore_ops = { - .suspend = s5p64x0_irq_pm_suspend, - .resume = s5p64x0_irq_pm_resume, -}; - -static int __init s5p64x0_syscore_init(void) -{ - register_syscore_ops(&s5p64x0_irq_syscore_ops); - - return 0; -} -core_initcall(s5p64x0_syscore_init); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c deleted file mode 100644 index 6840e197cb2..00000000000 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ /dev/null @@ -1,280 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/pwm_backlight.h> -#include <linux/fb.h> -#include <linux/mmc/host.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/pll.h> -#include <plat/adc.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/samsung-time.h> -#include <plat/backlight.h> -#include <plat/fb.h> -#include <plat/sdhci.h> - -#include "common.h" -#include "i2c.h" - -#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2440_UFCON_TXTRIG16 | \ - S3C2410_UFCON_RXTRIG8) - -static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win smdk6440_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdk6440_lcd_timing = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = { - .win[0] = &smdk6440_fb_win0, - .vtiming = &smdk6440_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, -}; - -/* LCD power controller */ -static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd, - unsigned int power) -{ - int err; - - if (power) { - err = gpio_request(S5P6440_GPN(5), "GPN"); - if (err) { - printk(KERN_ERR "failed to request GPN for lcd reset\n"); - return; - } - - gpio_direction_output(S5P6440_GPN(5), 1); - gpio_set_value(S5P6440_GPN(5), 0); - gpio_set_value(S5P6440_GPN(5), 1); - gpio_free(S5P6440_GPN(5)); - } -} - -static struct plat_lcd_data smdk6440_lcd_power_data = { - .set_power = smdk6440_lte480_reset_power, -}; - -static struct platform_device smdk6440_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdk6440_lcd_power_data, -}; - -static struct platform_device *smdk6440_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_i2c0, - &s3c_device_i2c1, - &samsung_device_pwm, - &s3c_device_ts, - &s3c_device_wdt, - &s5p6440_device_iis, - &s3c_device_fb, - &smdk6440_lcd_lte480wv, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, -}; - -static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6440_i2c0_cfg_gpio, -}; - -static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { - .flags = 0, - .bus_num = 1, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6440_i2c1_cfg_gpio, -}; - -static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { - /* To be populated */ -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = { - .no = S5P6440_GPF(15), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdk6440_bl_data = { - .pwm_id = 1, - .enable_gpio = -1, -}; - -static void __init smdk6440_map_io(void) -{ - s5p64x0_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void s5p6440_set_lcd_interface(void) -{ - unsigned int cfg; - - /* select TFT LCD type (RGB I/F) */ - cfg = __raw_readl(S5P64X0_SPCON0); - cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; - cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; - __raw_writel(cfg, S5P64X0_SPCON0); -} - -static void __init smdk6440_machine_init(void) -{ - s3c24xx_ts_set_platdata(NULL); - - s3c_i2c0_set_platdata(&s5p6440_i2c0_data); - s3c_i2c1_set_platdata(&s5p6440_i2c1_data); - i2c_register_board_info(0, smdk6440_i2c_devs0, - ARRAY_SIZE(smdk6440_i2c_devs0)); - i2c_register_board_info(1, smdk6440_i2c_devs1, - ARRAY_SIZE(smdk6440_i2c_devs1)); - - s5p6440_set_lcd_interface(); - s3c_fb_set_platdata(&smdk6440_lcd_pdata); - - s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata); - - platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); - - samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data); -} - -MACHINE_START(SMDK6440, "SMDK6440") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - - .init_irq = s5p6440_init_irq, - .map_io = smdk6440_map_io, - .init_machine = smdk6440_machine_init, - .init_time = samsung_timer_init, - .restart = s5p64x0_restart, -MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c deleted file mode 100644 index fa1341c074c..00000000000 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ /dev/null @@ -1,299 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/pwm_backlight.h> -#include <linux/fb.h> -#include <linux/mmc/host.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/pll.h> -#include <plat/adc.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/samsung-time.h> -#include <plat/backlight.h> -#include <plat/fb.h> -#include <plat/sdhci.h> - -#include "common.h" -#include "i2c.h" - -#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2440_UFCON_TXTRIG16 | \ - S3C2410_UFCON_RXTRIG8) - -static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, -#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 - [4] = { - .hwport = 4, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, -#endif -#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 - [5] = { - .hwport = 5, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, -#endif -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win smdk6450_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdk6450_lcd_timing = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = { - .win[0] = &smdk6450_fb_win0, - .vtiming = &smdk6450_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, -}; - -/* LCD power controller */ -static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd, - unsigned int power) -{ - int err; - - if (power) { - err = gpio_request(S5P6450_GPN(5), "GPN"); - if (err) { - printk(KERN_ERR "failed to request GPN for lcd reset\n"); - return; - } - - gpio_direction_output(S5P6450_GPN(5), 1); - gpio_set_value(S5P6450_GPN(5), 0); - gpio_set_value(S5P6450_GPN(5), 1); - gpio_free(S5P6450_GPN(5)); - } -} - -static struct plat_lcd_data smdk6450_lcd_power_data = { - .set_power = smdk6450_lte480_reset_power, -}; - -static struct platform_device smdk6450_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdk6450_lcd_power_data, -}; - -static struct platform_device *smdk6450_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_i2c0, - &s3c_device_i2c1, - &samsung_device_pwm, - &s3c_device_ts, - &s3c_device_wdt, - &s5p6450_device_iis0, - &s3c_device_fb, - &smdk6450_lcd_lte480wv, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - /* s5p6450_device_spi0 will be added */ -}; - -static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6450_i2c0_cfg_gpio, -}; - -static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { - .flags = 0, - .bus_num = 1, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6450_i2c1_cfg_gpio, -}; - -static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("wm8580", 0x1b), }, - { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ -}; - -static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { - { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = { - .no = S5P6450_GPF(15), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdk6450_bl_data = { - .pwm_id = 1, - .enable_gpio = -1, -}; - -static void __init smdk6450_map_io(void) -{ - s5p64x0_init_io(NULL, 0); - s3c24xx_init_clocks(19200000); - s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void s5p6450_set_lcd_interface(void) -{ - unsigned int cfg; - - /* select TFT LCD type (RGB I/F) */ - cfg = __raw_readl(S5P64X0_SPCON0); - cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; - cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; - __raw_writel(cfg, S5P64X0_SPCON0); -} - -static void __init smdk6450_machine_init(void) -{ - s3c24xx_ts_set_platdata(NULL); - - s3c_i2c0_set_platdata(&s5p6450_i2c0_data); - s3c_i2c1_set_platdata(&s5p6450_i2c1_data); - i2c_register_board_info(0, smdk6450_i2c_devs0, - ARRAY_SIZE(smdk6450_i2c_devs0)); - i2c_register_board_info(1, smdk6450_i2c_devs1, - ARRAY_SIZE(smdk6450_i2c_devs1)); - - s5p6450_set_lcd_interface(); - s3c_fb_set_platdata(&smdk6450_lcd_pdata); - - s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata); - - platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); - - samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data); -} - -MACHINE_START(SMDK6450, "SMDK6450") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - - .init_irq = s5p6450_init_irq, - .map_io = smdk6450_map_io, - .init_machine = smdk6450_machine_init, - .init_time = samsung_timer_init, - .restart = s5p64x0_restart, -MACHINE_END diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c deleted file mode 100644 index ec8229cee71..00000000000 --- a/arch/arm/mach-s5p64x0/pm.c +++ /dev/null @@ -1,202 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/pm.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 Power Management Support - * - * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/suspend.h> -#include <linux/syscore_ops.h> -#include <linux/io.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/wakeup-mask.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -static struct sleep_save s5p64x0_core_save[] = { - SAVE_ITEM(S5P64X0_APLL_CON), - SAVE_ITEM(S5P64X0_MPLL_CON), - SAVE_ITEM(S5P64X0_EPLL_CON), - SAVE_ITEM(S5P64X0_EPLL_CON_K), - SAVE_ITEM(S5P64X0_CLK_SRC0), - SAVE_ITEM(S5P64X0_CLK_SRC1), - SAVE_ITEM(S5P64X0_CLK_DIV0), - SAVE_ITEM(S5P64X0_CLK_DIV1), - SAVE_ITEM(S5P64X0_CLK_DIV2), - SAVE_ITEM(S5P64X0_CLK_DIV3), - SAVE_ITEM(S5P64X0_CLK_GATE_MEM0), - SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1), - SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1), -}; - -static struct sleep_save s5p64x0_misc_save[] = { - SAVE_ITEM(S5P64X0_AHB_CON0), - SAVE_ITEM(S5P64X0_SPCON0), - SAVE_ITEM(S5P64X0_SPCON1), - SAVE_ITEM(S5P64X0_MEM0CONSLP0), - SAVE_ITEM(S5P64X0_MEM0CONSLP1), - SAVE_ITEM(S5P64X0_MEM0DRVCON), - SAVE_ITEM(S5P64X0_MEM1DRVCON), -}; - -/* DPLL is present only in S5P6450 */ -static struct sleep_save s5p6450_core_save[] = { - SAVE_ITEM(S5P6450_DPLL_CON), - SAVE_ITEM(S5P6450_DPLL_CON_K), -}; - -void s3c_pm_configure_extint(void) -{ - __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK); -} - -void s3c_pm_restore_core(void) -{ - __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK); - - s3c_pm_do_restore_core(s5p64x0_core_save, - ARRAY_SIZE(s5p64x0_core_save)); - - if (soc_is_s5p6450()) - s3c_pm_do_restore_core(s5p6450_core_save, - ARRAY_SIZE(s5p6450_core_save)); - - s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save)); -} - -void s3c_pm_save_core(void) -{ - s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save)); - - if (soc_is_s5p6450()) - s3c_pm_do_save(s5p6450_core_save, - ARRAY_SIZE(s5p6450_core_save)); - - s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save)); -} - -static int s5p64x0_cpu_suspend(unsigned long arg) -{ - unsigned long tmp = 0; - - /* - * Issue the standby signal into the pm unit. Note, we - * issue a write-buffer drain just in case. - */ - asm("b 1f\n\t" - ".align 5\n\t" - "1:\n\t" - "mcr p15, 0, %0, c7, c10, 5\n\t" - "mcr p15, 0, %0, c7, c10, 4\n\t" - "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp)); - - pr_info("Failed to suspend the system\n"); - return 1; /* Aborting suspend */ -} - -/* mapping of interrupts to parts of the wakeup mask */ -static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = { - { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, }, - { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, }, - { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, }, - { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, }, -}; - -static void s5p64x0_pm_prepare(void) -{ - u32 tmp; - - samsung_sync_wakemask(S5P64X0_PWR_CFG, - s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs)); - - /* store the resume address in INFORM0 register */ - __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0); - - /* setup clock gating for FIMGVG block */ - __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \ - (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1); - __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \ - (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1); - - /* Configure the stabilization counter with wait time required */ - __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE); - - /* set WFI to SLEEP mode configuration */ - tmp = __raw_readl(S5P64X0_SLEEP_CFG); - tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN); - __raw_writel(tmp, S5P64X0_SLEEP_CFG); - - tmp = __raw_readl(S5P64X0_PWR_CFG); - tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK); - tmp |= S5P64X0_PWR_CFG_WFI_SLEEP; - __raw_writel(tmp, S5P64X0_PWR_CFG); - - /* - * set OTHERS register to disable interrupt before going to - * sleep. This bit is present only in S5P6450, it is reserved - * in S5P6440. - */ - if (soc_is_s5p6450()) { - tmp = __raw_readl(S5P64X0_OTHERS); - tmp |= S5P6450_OTHERS_DISABLE_INT; - __raw_writel(tmp, S5P64X0_OTHERS); - } - - /* ensure previous wakeup state is cleared before sleeping */ - __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT); - -} - -static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif) -{ - pm_cpu_prep = s5p64x0_pm_prepare; - pm_cpu_sleep = s5p64x0_cpu_suspend; - - return 0; -} - -static struct subsys_interface s5p64x0_pm_interface = { - .name = "s5p64x0_pm", - .subsys = &s5p64x0_subsys, - .add_dev = s5p64x0_pm_add, -}; - -static __init int s5p64x0_pm_drvinit(void) -{ - s3c_pm_init(); - - return subsys_interface_register(&s5p64x0_pm_interface); -} -arch_initcall(s5p64x0_pm_drvinit); - -static void s5p64x0_pm_resume(void) -{ - u32 tmp; - - tmp = __raw_readl(S5P64X0_OTHERS); - tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \ - S5P64X0_OTHERS_RET_UART); - __raw_writel(tmp , S5P64X0_OTHERS); -} - -static struct syscore_ops s5p64x0_pm_syscore_ops = { - .resume = s5p64x0_pm_resume, -}; - -static __init int s5p64x0_pm_syscore_init(void) -{ - register_syscore_ops(&s5p64x0_pm_syscore_ops); - - return 0; -} -arch_initcall(s5p64x0_pm_syscore_init); diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c deleted file mode 100644 index f346ee4af54..00000000000 --- a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Base S5P64X0 GPIO setup information for LCD framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/fb.h> -#include <linux/gpio.h> - -#include <plat/cpu.h> -#include <plat/fb.h> -#include <plat/gpio-cfg.h> - -void s5p64x0_fb_gpio_setup_24bpp(void) -{ - if (soc_is_s5p6440()) { - s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2)); - } else if (soc_is_s5p6450()) { - s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2)); - } -} diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c deleted file mode 100644 index 569b76ac98c..00000000000 --- a/arch/arm/mach-s5p64x0/setup-i2c0.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64x0/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "i2c.h" - -void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6440_GPB(5), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} - -void s5p6450_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6450_GPB(5), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c deleted file mode 100644 index 867374e6d0b..00000000000 --- a/arch/arm/mach-s5p64x0/setup-i2c1.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * I2C1 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "i2c.h" - -void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6440_GPR(9), 2, - S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); -} - -void s5p6450_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6450_GPR(9), 2, - S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); -} - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c deleted file mode 100644 index 8410af0d12b..00000000000 --- a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-clock.h> - -#include <plat/gpio-cfg.h> -#include <plat/sdhci.h> -#include <plat/cpu.h> - -void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG pins to special-function 2 */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width, - S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width, - S3C_GPIO_SFN(2)); - - /* Set GPG[6] pin to special-function 2 - MMC0 CDn */ - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - if (soc_is_s5p6450()) { - s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2)); - } else { - s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2)); - } - } -} - -void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2)); - - switch (width) { - case 8: - /* Set data pins GPH[6:9] special-function 2 */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4, - S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, - S3C_GPIO_SFN(2)); - case 4: - /* set data pins GPH[2:5] special-function 2 */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4, - S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4, - S3C_GPIO_SFN(2)); - default: - break; - } - - /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */ - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - if (soc_is_s5p6450()) { - s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3)); - } else { - s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3)); - } - } -} - -void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */ - s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3)); - - /* Set data pins GPH[6:9] pins to special-function 3 */ - s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3)); -} - -void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - /* Set all the necessary GPG pins to special-function 3 */ - s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c deleted file mode 100644 index 7664356720c..00000000000 --- a/arch/arm/mach-s5p64x0/setup-spi.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - if (soc_is_s5p6450()) - s3c_gpio_cfgall_range(S5P6450_GPC(0), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - else - s3c_gpio_cfgall_range(S5P6440_GPC(0), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - if (soc_is_s5p6450()) - s3c_gpio_cfgall_range(S5P6450_GPC(4), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - else - s3c_gpio_cfgall_range(S5P6440_GPC(4), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif |