diff options
Diffstat (limited to 'arch/arm/mach-s5pc100')
-rw-r--r-- | arch/arm/mach-s5pc100/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/mach-s5pc100/clock.c | 15 | ||||
-rw-r--r-- | arch/arm/mach-s5pc100/dma.c | 324 | ||||
-rw-r--r-- | arch/arm/mach-s5pc100/include/mach/dma.h | 4 |
4 files changed, 226 insertions, 119 deletions
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index e8a33c4b054..e538a4c67e9 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -10,7 +10,7 @@ if ARCH_S5PC100 config CPU_S5PC100 bool select S5P_EXT_INT - select S3C_PL330_DMA + select SAMSUNG_DMADEV help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index ff5cbb30de5..8d47709da71 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = { .name = "otg_phy", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static struct clk *clk_src_mout_href_list[] = { [0] = &s5p_clk_27m, [1] = &clk_fin_hpll, @@ -454,14 +459,14 @@ static struct clk init_clocks_off[] = { .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 2), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 1), }, { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dma", + .devname = "dma-pl330.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 0), @@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index bf4cd0fb97c..065a087f5a8 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pc100/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,150 +21,246 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> +#include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pc100_pdma0_resource[] = { - [0] = { - .start = S5PC100_PA_PDMA0, - .end = S5PC100_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[30] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_IRDA, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_EXTERNAL, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_SPDIF, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_HSI_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_HSI_TX, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata s5pc100_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_IRDA, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_SPI2_RX, - [21] = DMACH_SPI2_TX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_EXTERNAL, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_HSI_RX, - [29] = DMACH_HSI_TX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5pc100_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device s5pc100_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource), - .resource = s5pc100_pdma0_resource, - .dev = { +struct amba_device s5pc100_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pc100_pdma0_pdata, }, -}; - -static struct resource s5pc100_pdma1_resource[] = { - [0] = { - .start = S5PC100_PA_PDMA1, - .end = S5PC100_PA_PDMA1 + SZ_4K, + .res = { + .start = S5PC100_PA_PDMA0, + .end = S5PC100_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct s3c_pl330_platdata s5pc100_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_IRDA, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_SPI2_RX, - [21] = DMACH_SPI2_TX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_MAX, - [31] = DMACH_MAX, +struct dma_pl330_peri pdma1_peri[30] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_IRDA, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, }, }; -static struct platform_device s5pc100_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource), - .resource = s5pc100_pdma1_resource, - .dev = { +struct dma_pl330_platdata s5pc100_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, +}; + +struct amba_device s5pc100_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pc100_pdma1_pdata, }, -}; - -static struct platform_device *s5pc100_dmacs[] __initdata = { - &s5pc100_device_pdma0, - &s5pc100_device_pdma1, + .res = { + .start = S5PC100_PA_PDMA1, + .end = S5PC100_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5pc100_dma_init(void) { - platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs)); + amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h index 81209eb1409..201842a3769 100644 --- a/arch/arm/mach-s5pc100/include/mach/dma.h +++ b/arch/arm/mach-s5pc100/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ |