diff options
Diffstat (limited to 'arch/arm/mach-s5pv210/mach-goni.c')
| -rw-r--r-- | arch/arm/mach-s5pv210/mach-goni.c | 71 |
1 files changed, 69 insertions, 2 deletions
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 31d5aa76975..15edcae448b 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -34,7 +34,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-fb.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> @@ -47,6 +46,13 @@ #include <plat/sdhci.h> #include <plat/clock.h> #include <plat/s5p-time.h> +#include <plat/mfc.h> +#include <plat/regs-fb-v4.h> +#include <plat/camport.h> + +#include <media/v4l2-mediabus.h> +#include <media/s5p_fimc.h> +#include <media/noon010pc30.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -271,6 +277,14 @@ static void __init goni_tsp_init(void) i2c2_devs[0].irq = gpio_to_irq(gpio); } +static void goni_camera_init(void) +{ + s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); + + /* Set max driver strength on CAM_A_CLKOUT pin. */ + s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4); +} + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -284,6 +298,7 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = { static struct regulator_consumer_supply goni_ldo8_consumers[] = { REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), + REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; static struct regulator_consumer_supply goni_ldo11_consumers[] = { @@ -474,6 +489,10 @@ static struct regulator_consumer_supply buck1_consumer = static struct regulator_consumer_supply buck2_consumer = REGULATOR_SUPPLY("vddint", NULL); +static struct regulator_consumer_supply buck3_consumer = + REGULATOR_SUPPLY("vdet", "s5p-sdo"); + + static struct regulator_init_data goni_buck1_data = { .constraints = { .name = "VARM_1.2V", @@ -510,6 +529,8 @@ static struct regulator_init_data goni_buck3_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &buck3_consumer, }; static struct regulator_init_data goni_buck4_data = { @@ -800,6 +821,34 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; +static struct noon010pc30_platform_data noon010pc30_pldata = { + .clk_rate = 16000000UL, + .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */ + .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */ +}; + +static struct i2c_board_info noon010pc30_board_info = { + I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1), + .platform_data = &noon010pc30_pldata, +}; + +static struct s5p_fimc_isp_info goni_camera_sensors[] = { + { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &noon010pc30_board_info, + .i2c_bus_num = 0, + .clk_frequency = 16000000UL, + }, +}; + +struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { + .isp_info = goni_camera_sensors, + .num_clients = ARRAY_SIZE(goni_camera_sensors), +}; + static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, @@ -808,10 +857,16 @@ static struct platform_device *goni_devices[] __initdata = { &goni_i2c_gpio5, &mmc2_fixed_voltage, &goni_device_gpiokeys, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, + &s5p_device_mixer, + &s5p_device_sdo, &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5p_device_fimc_md, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -841,6 +896,11 @@ static void __init goni_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void __init goni_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init goni_machine_init(void) { /* Radio: call before I2C 1 registeration */ @@ -875,6 +935,12 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + /* FIMC */ + s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), + &s5p_device_fimc_md); + + goni_camera_init(); + /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); @@ -888,9 +954,10 @@ static void __init goni_machine_init(void) MACHINE_START(GONI, "GONI") /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, + .atag_offset = 0x100, .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, .timer = &s5p_timer, + .reserve = &goni_reserve, MACHINE_END |