diff options
Diffstat (limited to 'arch/arm/mach-s5pv210')
30 files changed, 1986 insertions, 214 deletions
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 5315fec3db8..862f239a0fd 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,9 +11,9 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select PLAT_S5P select S3C_PL330_DMA select S5P_EXT_INT + select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -58,7 +58,6 @@ menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -75,7 +74,7 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE + select S5P_GPIO_INT select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -83,8 +82,15 @@ config MACH_GONI select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_USB_HSOTG select S5P_DEV_ONENAND + select SAMSUNG_DEV_KEYPAD select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI help Machine support for Samsung GONI board @@ -93,7 +99,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC @@ -113,7 +118,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -134,6 +138,29 @@ config MACH_SMDKV210 help Machine support for Samsung SMDKV210 +config MACH_TORBRECK + bool "Torbreck" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_SDHCI + help + Machine support for aESOP Torbreck + endmenu +config S5PV210_PM + bool + help + Power Management code common to S5PV210 + endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 70454891240..ff1a0db57a2 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,6 +14,8 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o +obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o # machine support @@ -21,6 +23,7 @@ obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o obj-$(CONFIG_MACH_GONI) += mach-goni.o +obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o # device support diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index d562670e1b0..019c3a69b0e 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -31,6 +31,8 @@ #include <plat/clock-clksrc.h> #include <plat/s5pv210.h> +static unsigned long xtal; + static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", @@ -259,6 +261,36 @@ static struct clksrc_clk clk_sclk_vpll = { .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, }; +static struct clk *clkset_moutdmc0src_list[] = { + [0] = &clk_sclk_a2m.clk, + [1] = &clk_mout_mpll.clk, + [2] = NULL, + [3] = NULL, +}; + +static struct clksrc_sources clkset_moutdmc0src = { + .sources = clkset_moutdmc0src_list, + .nr_sources = ARRAY_SIZE(clkset_moutdmc0src_list), +}; + +static struct clksrc_clk clk_mout_dmc0 = { + .clk = { + .name = "mout_dmc0", + .id = -1, + }, + .sources = &clkset_moutdmc0src, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, +}; + +static struct clksrc_clk clk_sclk_dmc0 = { + .clk = { + .name = "sclk_dmc0", + .id = -1, + .parent = &clk_mout_dmc0.clk, + }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 }, +}; + static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk) { return clk_get_rate(clk->parent) / 2; @@ -268,8 +300,29 @@ static struct clk_ops clk_hclk_imem_ops = { .get_rate = s5pv210_clk_imem_get_rate, }; +static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk) +{ + return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); +} + +static struct clk_ops clk_fout_apll_ops = { + .get_rate = s5pv210_clk_fout_apll_get_rate, +}; + static struct clk init_clocks_disable[] = { { + .name = "pdma", + .id = 0, + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "pdma", + .id = 1, + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 4), + }, { .name = "rot", .id = -1, .parent = &clk_hclk_dsys.clk, @@ -431,6 +484,12 @@ static struct clk init_clocks_disable[] = { .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 6), + }, { + .name = "spdif", + .id = -1, + .parent = &clk_p, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 0), }, }; @@ -660,6 +719,53 @@ static struct clksrc_sources clkset_sclk_spdif = { .nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list), }; +static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *pclk; + int ret; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + ret = pclk->ops->set_rate(pclk, rate); + clk_put(pclk); + + return ret; +} + +static unsigned long s5pv210_spdif_get_rate(struct clk *clk) +{ + struct clk *pclk; + int rate; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + rate = pclk->ops->get_rate(clk); + clk_put(pclk); + + return rate; +} + +static struct clk_ops s5pv210_sclk_spdif_ops = { + .set_rate = s5pv210_spdif_set_rate, + .get_rate = s5pv210_spdif_get_rate, +}; + +static struct clksrc_clk clk_sclk_spdif = { + .clk = { + .name = "sclk_spdif", + .id = -1, + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 27), + .ops = &s5pv210_sclk_spdif_ops, + }, + .sources = &clkset_sclk_spdif, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, +}; + static struct clk *clkset_group2_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, @@ -744,15 +850,6 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_sclk_mixer, .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, }, { - .clk = { - .name = "sclk_spdif", - .id = -1, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 27), - }, - .sources = &clkset_sclk_spdif, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, - }, { .clk = { .name = "sclk_fimc", .id = 0, @@ -953,12 +1050,93 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_dac, &clk_sclk_pixel, &clk_sclk_hdmi, + &clk_mout_dmc0, + &clk_sclk_dmc0, + &clk_sclk_audio0, + &clk_sclk_audio1, + &clk_sclk_audio2, + &clk_sclk_spdif, +}; + +static u32 epll_div[][6] = { + { 48000000, 0, 48, 3, 3, 0 }, + { 96000000, 0, 48, 3, 2, 0 }, + { 144000000, 1, 72, 3, 2, 0 }, + { 192000000, 0, 48, 3, 1, 0 }, + { 288000000, 1, 72, 3, 1, 0 }, + { 32750000, 1, 65, 3, 4, 35127 }, + { 32768000, 1, 65, 3, 4, 35127 }, + { 45158400, 0, 45, 3, 3, 10355 }, + { 45000000, 0, 45, 3, 3, 10355 }, + { 45158000, 0, 45, 3, 3, 10355 }, + { 49125000, 0, 49, 3, 3, 9961 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 67737600, 1, 67, 3, 3, 48366 }, + { 67738000, 1, 67, 3, 3, 48366 }, + { 73800000, 1, 73, 3, 3, 47710 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 36000000, 1, 32, 3, 4, 0 }, + { 60000000, 1, 60, 3, 3, 0 }, + { 72000000, 1, 72, 3, 3, 0 }, + { 80000000, 1, 80, 3, 3, 0 }, + { 84000000, 0, 42, 3, 2, 0 }, + { 50000000, 0, 50, 3, 3, 0 }, +}; + +static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + epll_con = __raw_readl(S5P_EPLL_CON); + epll_con_k = __raw_readl(S5P_EPLL_CON1); + + epll_con_k &= ~PLL46XX_KDIV_MASK; + epll_con &= ~(1 << 27 | + PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | + PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | + PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= epll_div[i][5] << 0; + epll_con |= (epll_div[i][1] << 27 | + epll_div[i][2] << PLL46XX_MDIV_SHIFT | + epll_div[i][3] << PLL46XX_PDIV_SHIFT | + epll_div[i][4] << PLL46XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P_EPLL_CON); + __raw_writel(epll_con_k, S5P_EPLL_CON1); + + printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", + clk->rate, rate); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5pv210_epll_ops = { + .set_rate = s5pv210_epll_set_rate, + .get_rate = s5p_epll_get_rate, }; void __init_or_cpufreq s5pv210_setup_clocks(void) { struct clk *xtal_clk; - unsigned long xtal; unsigned long vpllsrc; unsigned long armclk; unsigned long hclk_msys; @@ -974,6 +1152,10 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) unsigned int ptr; u32 clkdiv0, clkdiv1; + /* Set functions for clk_fout_epll */ + clk_fout_epll.enable = s5p_epll_enable; + clk_fout_epll.ops = &s5pv210_epll_ops; + printk(KERN_DEBUG "%s: registering clocks\n", __func__); clkdiv0 = __raw_readl(S5P_CLK_DIV0); @@ -992,11 +1174,12 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON), + __raw_readl(S5P_EPLL_CON1), pll_4600); vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502); - clk_fout_apll.rate = apll; + clk_fout_apll.ops = &clk_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; clk_fout_vpll.rate = vpll; diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 2f16bfc0a11..8eb480e201b 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -85,6 +85,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .pfn = __phys_to_pfn(S5PV210_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(S5PV210_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC1, + .pfn = __phys_to_pfn(S5PV210_PA_DMC1), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn =__phys_to_pfn(S5PV210_PA_HSPHY), + .length = SZ_4K, + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c new file mode 100644 index 00000000000..a6f22920a2c --- /dev/null +++ b/arch/arm/mach-s5pv210/cpufreq.c @@ -0,0 +1,484 @@ +/* linux/arch/arm/mach-s5pv210/cpufreq.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * CPU frequency scaling for S5PC110/S5PV210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +static struct clk *cpu_clk; +static struct clk *dmc0_clk; +static struct clk *dmc1_clk; +static struct cpufreq_freqs freqs; + +/* APLL M,P,S values for 1G/800Mhz */ +#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) +#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) + +/* + * DRAM configurations to calculate refresh counter for changing + * frequency of memory. + */ +struct dram_conf { + unsigned long freq; /* HZ */ + unsigned long refresh; /* DRAM refresh counter * 1000 */ +}; + +/* DRAM configuration (DMC0 and DMC1) */ +static struct dram_conf s5pv210_dram_conf[2]; + +enum perf_level { + L0, L1, L2, L3, L4, +}; + +enum s5pv210_mem_type { + LPDDR = 0x1, + LPDDR2 = 0x2, + DDR2 = 0x4, +}; + +enum s5pv210_dmc_port { + DMC0 = 0, + DMC1, +}; + +static struct cpufreq_frequency_table s5pv210_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 200*1000}, + {L4, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static u32 clkdiv_val[5][11] = { + /* + * Clock divider value for following + * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, + * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, + * ONEDRAM, MFC, G3D } + */ + + /* L0 : [1000/200/100][166/83][133/66][200/200] */ + {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L1 : [800/200/100][166/83][133/66][200/200] */ + {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L2 : [400/200/100][166/83][133/66][200/200] */ + {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L3 : [200/200/100][166/83][133/66][200/200] */ + {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L4 : [100/100/100][83/83][66/66][100/100] */ + {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, +}; + +/* + * This function set DRAM refresh counter + * accoriding to operating frequency of DRAM + * ch: DMC port number 0 or 1 + * freq: Operating frequency of DRAM(KHz) + */ +static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) +{ + unsigned long tmp, tmp1; + void __iomem *reg = NULL; + + if (ch == DMC0) + reg = (S5P_VA_DMC0 + 0x30); + else if (ch == DMC1) + reg = (S5P_VA_DMC1 + 0x30); + else + printk(KERN_ERR "Cannot find DMC port\n"); + + /* Find current DRAM frequency */ + tmp = s5pv210_dram_conf[ch].freq; + + do_div(tmp, freq); + + tmp1 = s5pv210_dram_conf[ch].refresh; + + do_div(tmp1, tmp); + + __raw_writel(tmp1, reg); +} + +int s5pv210_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); +} + +unsigned int s5pv210_getspeed(unsigned int cpu) +{ + if (cpu) + return 0; + + return clk_get_rate(cpu_clk) / 1000; +} + +static int s5pv210_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned long reg; + unsigned int index, priv_index; + unsigned int pll_changing = 0; + unsigned int bus_speed_changing = 0; + + freqs.old = s5pv210_getspeed(0); + + if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + freqs.new = s5pv210_freq_table[index].frequency; + freqs.cpu = 0; + + if (freqs.new == freqs.old) + return 0; + + /* Finding current running level index */ + if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, + freqs.old, relation, &priv_index)) + return -EINVAL; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + if (freqs.new > freqs.old) { + /* Voltage up: will be implemented */ + } + + /* Check if there need to change PLL */ + if ((index == L0) || (priv_index == L0)) + pll_changing = 1; + + /* Check if there need to change System bus clock */ + if ((index == L4) || (priv_index == L4)) + bus_speed_changing = 1; + + if (bus_speed_changing) { + /* + * Reconfigure DRAM refresh counter value for minimum + * temporary clock while changing divider. + * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 + */ + if (pll_changing) + s5pv210_set_refresh(DMC1, 83000); + else + s5pv210_set_refresh(DMC1, 100000); + + s5pv210_set_refresh(DMC0, 83000); + } + + /* + * APLL should be changed in this level + * APLL -> MPLL(for stable transition) -> APLL + * Some clock source's clock API are not prepared. + * Do not use clock API in below code. + */ + if (pll_changing) { + /* + * 1. Temporary Change divider for MFC and G3D + * SCLKA2M(200/1=200)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | + (3 << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* + * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX + * (200/4=50)->(667/4=166)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | + (1 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 3. DMC1 refresh count for 133Mhz if (index == L4) is + * true refresh counter is already programed in upper + * code. 0x287@83Mhz + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 133000); + + /* 4. SCLKAPLL -> SCLKMPLL */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + } + + /* Change divider */ + reg = __raw_readl(S5P_CLK_DIV0); + + reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | + S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | + S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | + S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); + + reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | + (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | + (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | + (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | + (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | + (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | + (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | + (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); + + __raw_writel(reg, S5P_CLK_DIV0); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & 0xff); + + /* ARM MCS value changed */ + reg = __raw_readl(S5P_ARM_MCS_CON); + reg &= ~0x3; + if (index >= L3) + reg |= 0x3; + else + reg |= 0x1; + + __raw_writel(reg, S5P_ARM_MCS_CON); + + if (pll_changing) { + /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ + __raw_writel(0x2cf, S5P_APLL_LOCK); + + /* + * 6. Turn on APLL + * 6-1. Set PMS values + * 6-2. Wait untile the PLL is locked + */ + if (index == L0) + __raw_writel(APLL_VAL_1000, S5P_APLL_CON); + else + __raw_writel(APLL_VAL_800, S5P_APLL_CON); + + do { + reg = __raw_readl(S5P_APLL_CON); + } while (!(reg & (0x1 << 29))); + + /* + * 7. Change souce clock from SCLKMPLL(667Mhz) + * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX + * (667/4=166)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | + (0 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 8. Change divider for MFC and G3D + * (200/4=50)->(200/1=200)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | + (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* 9. Change MPLL to APLL in MSYS_MUX */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + /* + * 10. DMC1 refresh counter + * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c + * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 200000); + } + + /* + * L4 level need to change memory bus speed, hence onedram clock divier + * and memory refresh parameter should be changed + */ + if (bus_speed_changing) { + reg = __raw_readl(S5P_CLK_DIV6); + reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; + reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); + __raw_writel(reg, S5P_CLK_DIV6); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT1); + } while (reg & (1 << 15)); + + /* Reconfigure DRAM refresh counter value */ + if (index != L4) { + /* + * DMC0 : 166Mhz + * DMC1 : 200Mhz + */ + s5pv210_set_refresh(DMC0, 166000); + s5pv210_set_refresh(DMC1, 200000); + } else { + /* + * DMC0 : 83Mhz + * DMC1 : 100Mhz + */ + s5pv210_set_refresh(DMC0, 83000); + s5pv210_set_refresh(DMC1, 100000); + } + } + + if (freqs.new < freqs.old) { + /* Voltage down: will be implemented */ + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + printk(KERN_DEBUG "Perf changed[L%d]\n", index); + + return 0; +} + +#ifdef CONFIG_PM +static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy, + pm_message_t pmsg) +{ + return 0; +} + +static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int check_mem_type(void __iomem *dmc_reg) +{ + unsigned long val; + + val = __raw_readl(dmc_reg + 0x4); + val = (val & (0xf << 8)); + + return val >> 8; +} + +static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) +{ + unsigned long mem_type; + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + dmc0_clk = clk_get(NULL, "sclk_dmc0"); + if (IS_ERR(dmc0_clk)) { + clk_put(cpu_clk); + return PTR_ERR(dmc0_clk); + } + + dmc1_clk = clk_get(NULL, "hclk_msys"); + if (IS_ERR(dmc1_clk)) { + clk_put(dmc0_clk); + clk_put(cpu_clk); + return PTR_ERR(dmc1_clk); + } + + if (policy->cpu != 0) + return -EINVAL; + + /* + * check_mem_type : This driver only support LPDDR & LPDDR2. + * other memory type is not supported. + */ + mem_type = check_mem_type(S5P_VA_DMC0); + + if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { + printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); + return -EINVAL; + } + + /* Find current refresh counter and frequency each DMC */ + s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000); + s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); + + s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); + s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); + + policy->cur = policy->min = policy->max = s5pv210_getspeed(0); + + cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); + + policy->cpuinfo.transition_latency = 40000; + + return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); +} + +static struct cpufreq_driver s5pv210_driver = { + .flags = CPUFREQ_STICKY, + .verify = s5pv210_verify_speed, + .target = s5pv210_target, + .get = s5pv210_getspeed, + .init = s5pv210_cpu_init, + .name = "s5pv210", +#ifdef CONFIG_PM + .suspend = s5pv210_cpufreq_suspend, + .resume = s5pv210_cpufreq_resume, +#endif +}; + +static int __init s5pv210_cpufreq_init(void) +{ + return cpufreq_register_driver(&s5pv210_driver); +} + +late_initcall(s5pv210_cpufreq_init); diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 21dc6cf955c..1303fcb12b5 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -24,29 +24,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev) /* configure GPIO for i2s port */ switch (pdev->id) { case 1: - s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2)); break; case 2: - s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4)); break; case -1: - s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2)); break; default: @@ -151,25 +137,13 @@ static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev) { switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3)); break; case 1: - s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3)); break; case 2: - s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2)); break; default: printk(KERN_DEBUG "Invalid PCM Controller number!"); @@ -271,13 +245,7 @@ struct platform_device s5pv210_device_pcm2 = { static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4)); - - return 0; + return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4)); } static struct resource s5pv210_ac97_resource[] = { @@ -325,3 +293,43 @@ struct platform_device s5pv210_device_ac97 = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + +/* S/PDIF Controller platform_device */ + +static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static struct resource s5pv210_spdif_resource[] = { + [0] = { + .start = S5PV210_PA_SPDIF, + .end = S5PV210_PA_SPDIF + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPDIF, + .end = DMACH_SPDIF, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata samsung_spdif_pdata = { + .cfg_gpio = s5pv210_spdif_cfg_gpio, +}; + +static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv210_device_spdif = { + .name = "samsung-spdif", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv210_spdif_resource), + .resource = s5pv210_spdif_resource, + .dev = { + .platform_data = &samsung_spdif_pdata, + .dma_mask = &s5pv210_spdif_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index 826cdbc43e2..e3249a47e3b 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -35,23 +35,15 @@ static char *spi_src_clks[] = { */ static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP); + base = S5PV210_GPB(0); break; case 1: - s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP); + base = S5PV210_GPB(4); break; default: @@ -59,6 +51,9 @@ static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 778ad5fe231..497d3439a14 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { static struct platform_device s5pv210_device_pdma0 = { .name = "s3c-pl330", - .id = 1, + .id = 0, .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), .resource = s5pv210_pdma0_resource, .dev = { @@ -144,7 +144,7 @@ static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { static struct platform_device s5pv210_device_pdma1 = { .name = "s3c-pl330", - .id = 2, + .id = 1, .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), .resource = s5pv210_pdma1_resource, .dev = { diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c index 0d459112d03..ab673effd76 100644 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -150,6 +150,7 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { .label = "GPG3", }, }, { + .config = &gpio_cfg_noint, .chip = { .base = S5PV210_GPI(0), .ngpio = S5PV210_GPIO_I_NR, @@ -223,34 +224,42 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { }, { .base = (S5P_VA_GPIO + 0xC00), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), .chip = { .base = S5PV210_GPH0(0), .ngpio = S5PV210_GPIO_H0_NR, .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC20), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), .chip = { .base = S5PV210_GPH1(0), .ngpio = S5PV210_GPIO_H1_NR, .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC40), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), .chip = { .base = S5PV210_GPH2(0), .ngpio = S5PV210_GPIO_H2_NR, .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC60), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), .chip = { .base = S5PV210_GPH3(0), .ngpio = S5PV210_GPIO_H3_NR, .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, }, }, }; @@ -259,11 +268,14 @@ static __init int s5pv210_gpiolib_init(void) { struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); + int gpioint_group = 0; int i = 0; for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) + if (chip->config == NULL) { chip->config = &gpio_cfg; + chip->group = gpioint_group++; + } if (chip->base == NULL) chip->base = S5PV210_BANK_BASE(i); } diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index e1c020e5a49..119b95fdc3c 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -55,8 +55,8 @@ #define IRQ_SPI1 S5P_IRQ_VIC1(16) #define IRQ_SPI2 S5P_IRQ_VIC1(17) #define IRQ_IRDA S5P_IRQ_VIC1(18) -#define IRQ_CAN0 S5P_IRQ_VIC1(19) -#define IRQ_CAN1 S5P_IRQ_VIC1(20) +#define IRQ_IIC2 S5P_IRQ_VIC1(19) +#define IRQ_IIC3 S5P_IRQ_VIC1(20) #define IRQ_HSIRX S5P_IRQ_VIC1(21) #define IRQ_HSITX S5P_IRQ_VIC1(22) #define IRQ_UHOST S5P_IRQ_VIC1(23) @@ -109,7 +109,7 @@ #define IRQ_IPC S5P_IRQ_VIC3(0) #define IRQ_HOSTIF S5P_IRQ_VIC3(1) -#define IRQ_MMC3 S5P_IRQ_VIC3(2) +#define IRQ_HSMMC3 S5P_IRQ_VIC3(2) #define IRQ_CEC S5P_IRQ_VIC3(3) #define IRQ_TSI S5P_IRQ_VIC3(4) #define IRQ_MDNIE0 S5P_IRQ_VIC3(5) @@ -121,8 +121,12 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) +/* GPIO interrupt */ +#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) +#define S5P_GPIOINT_GROUP_MAXNR 22 + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index bd9afd52466..861d7fe11fc 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -57,6 +57,8 @@ #define S5P_SZ_UART SZ_256 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) + #define S5PV210_PA_SROMC (0xE8000000) #define S5PV210_PA_CFCON (0xE8200000) @@ -73,6 +75,9 @@ #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) +#define S5PV210_PA_HSOTG (0xEC000000) +#define S5PV210_PA_HSPHY (0xEC100000) + #define S5PV210_PA_VIC0 (0xF2000000) #define S5PV210_PA_VIC1 (0xF2100000) #define S5PV210_PA_VIC2 (0xF2200000) @@ -81,6 +86,9 @@ #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM +/* S/PDIF */ +#define S5PV210_PA_SPDIF 0xE1100000 + /* I2S */ #define S5PV210_PA_IIS0 0xEEE30000 #define S5PV210_PA_IIS1 0xE2100000 @@ -96,6 +104,9 @@ #define S5PV210_PA_ADC (0xE1700000) +#define S5PV210_PA_DMC0 (0xF0000000) +#define S5PV210_PA_DMC1 (0xF1400000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) @@ -108,6 +119,7 @@ #define S3C_PA_FB S5PV210_PA_FB #define S3C_PA_RTC S5PV210_PA_RTC #define S3C_PA_WDT S5PV210_PA_WATCHDOG +#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h new file mode 100644 index 00000000000..e8d394f8b05 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -0,0 +1,43 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +static inline void s3c_pm_debug_init_uart(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 499aef73747..ebaabe021af 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -25,6 +25,7 @@ #define S5P_APLL_CON S5P_CLKREG(0x100) #define S5P_MPLL_CON S5P_CLKREG(0x108) #define S5P_EPLL_CON S5P_CLKREG(0x110) +#define S5P_EPLL_CON1 S5P_CLKREG(0x114) #define S5P_VPLL_CON S5P_CLKREG(0x120) #define S5P_CLK_SRC0 S5P_CLKREG(0x200) @@ -67,11 +68,28 @@ #define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488) #define S5P_CLK_OUT S5P_CLKREG(0x500) +/* DIV/MUX STATUS */ +#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000) +#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004) +#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100) +#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104) + /* CLKSRC0 */ -#define S5P_CLKSRC0_MUX200_MASK (0x1<<16) +#define S5P_CLKSRC0_MUX200_SHIFT (16) +#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT) #define S5P_CLKSRC0_MUX166_MASK (0x1<<20) #define S5P_CLKSRC0_MUX133_MASK (0x1<<24) +/* CLKSRC2 */ +#define S5P_CLKSRC2_G3D_SHIFT (0) +#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT) +#define S5P_CLKSRC2_MFC_SHIFT (4) +#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT) + +/* CLKSRC6*/ +#define S5P_CLKSRC6_ONEDRAM_SHIFT (24) +#define S5P_CLKSRC6_ONEDRAM_MASK (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT) + /* CLKDIV0 */ #define S5P_CLKDIV0_APLL_SHIFT (0) #define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) @@ -90,12 +108,24 @@ #define S5P_CLKDIV0_PCLK66_SHIFT (28) #define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) +/* CLKDIV2 */ +#define S5P_CLKDIV2_G3D_SHIFT (0) +#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT) +#define S5P_CLKDIV2_MFC_SHIFT (4) +#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT) + +/* CLKDIV6 */ +#define S5P_CLKDIV6_ONEDRAM_SHIFT (28) +#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT) + #define S5P_SWRESET S5P_CLKREG(0x2000) +#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100) + /* Registers related to power management */ #define S5P_PWR_CFG S5P_CLKREG(0xC000) #define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) -#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) +#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) #define S5P_PWR_MODE S5P_CLKREG(0xC00C) #define S5P_NORMAL_CFG S5P_CLKREG(0xC010) #define S5P_IDLE_CFG S5P_CLKREG(0xC020) @@ -159,8 +189,11 @@ #define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) /* OTHERS Resgister */ +#define S5P_OTHERS_RET_IO (1 << 31) +#define S5P_OTHERS_RET_CF (1 << 30) +#define S5P_OTHERS_RET_MMC (1 << 29) +#define S5P_OTHERS_RET_UART (1 << 28) #define S5P_OTHERS_USB_SIG_MASK (1 << 16) -#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28) /* MIPI */ #define S5P_MIPI_DPHY_EN (3) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h index 49e029b4978..de0c8997607 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -31,13 +31,6 @@ #define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) -/* values for S5P_EXTINT0 */ -#define S5P_EXTINT_LOWLEV (0x00) -#define S5P_EXTINT_HILEV (0x01) -#define S5P_EXTINT_FALLEDGE (0x02) -#define S5P_EXTINT_RISEEDGE (0x03) -#define S5P_EXTINT_BOTHEDGE (0x04) - #define EINT_MODE S3C_GPIO_SFN(0xf) #define EINT_GPIO_0(x) S5PV210_GPH0(x) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h new file mode 100644 index 00000000000..26691d39d0f --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h @@ -0,0 +1,19 @@ +/* arch/arm/mach-s5pv210/include/mach/regs-sys.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - System registers definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) +#define S5PV210_USB_PHY0_EN (1 << 0) +#define S5PV210_USB_PHY1_EN (1 << 1) + +/* compatibility defines for s3c-hsotg driver */ +#define S3C64XX_OTHERS S5PV210_USB_PHY_CON +#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h index df9a2880832..a6c659d68a5 100644 --- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h +++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h @@ -17,6 +17,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H __FILE__ -#define VMALLOC_END (0xE0000000UL) +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 00883087363..28677caf361 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -16,6 +16,8 @@ #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/mfd/max8998.h> +#include <linux/mfd/wm8994/pdata.h> +#include <linux/regulator/fixed.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> @@ -379,6 +381,119 @@ static struct max8998_platform_data aquila_max8998_pdata = { }; #endif +static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + /* GPIO I2C PMIC */ #define AP_I2C_GPIO_PMIC_BUS_4 4 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { @@ -404,6 +519,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { #endif }; +/* GPIO I2C AP 1.8V */ +#define AP_I2C_GPIO_BUS_5 5 +static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = { + .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ + .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ +}; + +static struct platform_device aquila_i2c_gpio5 = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_BUS_5, + .dev = { + .platform_data = &aquila_i2c_gpio5_data, + }, +}; + +static struct i2c_board_info i2c_gpio5_devs[] __initdata = { + { + /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ + I2C_BOARD_INFO("wm8994", 0x1a), + .platform_data = &wm8994_platform_data, + }, +}; + /* PMIC Power button */ static struct gpio_keys_button aquila_gpio_keys_table[] = { { @@ -475,6 +613,7 @@ static void aquila_setup_sdhci(void) static struct platform_device *aquila_devices[] __initdata = { &aquila_i2c_gpio_pmic, + &aquila_i2c_gpio5, &aquila_device_gpiokeys, &s3c_device_fb, &s5p_device_onenand, @@ -484,8 +623,33 @@ static struct platform_device *aquila_devices[] __initdata = { &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5pv210_device_iis0, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, }; +static void __init aquila_sound_init(void) +{ + unsigned int gpio; + + /* CODEC_XTAL_EN + * + * The Aquila board have a oscillator which provide main clock + * to WM8994 codec. The oscillator provide 24MHz clock to WM8994 + * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator. + * */ + gpio = S5PV210_GPH3(2); /* XEINT_26 */ + gpio_request(gpio, "CODEC_XTAL_EN"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. + * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) + * because it needs 24MHz clock to operate WM8994 codec. + */ + __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); +} + static void __init aquila_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -506,6 +670,11 @@ static void __init aquila_machine_init(void) s3c_fimc_setname(1, "s5p-fimc"); s3c_fimc_setname(2, "s5p-fimc"); + /* SOUND */ + aquila_sound_init(); + i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, + ARRAY_SIZE(i2c_gpio5_devs)); + /* FB */ s3c_fb_set_platdata(&aquila_lcd_pdata); diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index d9ecf57fc2a..b1dcf964a76 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -15,7 +15,13 @@ #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/qt602240_ts.h> #include <linux/mfd/max8998.h> +#include <linux/mfd/wm8994/pdata.h> +#include <linux/regulator/fixed.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/lcd.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> @@ -35,7 +41,10 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> +#include <plat/iic.h> +#include <plat/keypad.h> #include <plat/sdhci.h> +#include <plat/clock.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -87,13 +96,12 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win goni_fb_win0 = { .win_mode = { - .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55), .left_margin = 16, .right_margin = 16, - .upper_margin = 3, + .upper_margin = 2, .lower_margin = 28, .hsync_len = 2, - .vsync_len = 2, + .vsync_len = 1, .xres = 480, .yres = 800, .refresh = 55, @@ -111,9 +119,160 @@ static struct s3c_fb_platdata goni_lcd_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +static int lcd_power_on(struct lcd_device *ld, int enable) +{ + return 1; +} + +static int reset_lcd(struct lcd_device *ld) +{ + static unsigned int first = 1; + int reset_gpio = -1; + + reset_gpio = S5PV210_MP05(5); + + if (first) { + gpio_request(reset_gpio, "MLCD_RST"); + first = 0; + } + + gpio_direction_output(reset_gpio, 1); + return 1; +} + +static struct lcd_platform_data goni_lcd_platform_data = { + .reset = reset_lcd, + .power_on = lcd_power_on, + .lcd_enabled = 0, + .reset_delay = 120, /* 120ms */ + .power_on_delay = 25, /* 25ms */ + .power_off_delay = 200, /* 200ms */ +}; + +#define LCD_BUS_NUM 3 +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "s6e63m0", + .platform_data = &goni_lcd_platform_data, + .max_speed_hz = 1200000, + .bus_num = LCD_BUS_NUM, + .chip_select = 0, + .mode = SPI_MODE_3, + .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */ + }, +}; + +static struct spi_gpio_platform_data lcd_spi_gpio_data = { + .sck = S5PV210_MP04(1), /* DISPLAY_CLK */ + .mosi = S5PV210_MP04(3), /* DISPLAY_SI */ + .miso = SPI_GPIO_NO_MISO, + .num_chipselect = 1, +}; + +static struct platform_device goni_spi_gpio = { + .name = "spi_gpio", + .id = LCD_BUS_NUM, + .dev = { + .parent = &s3c_device_fb.dev, + .platform_data = &lcd_spi_gpio_data, + }, +}; + +/* KEYPAD */ +static uint32_t keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 1, KEY_MENU), /* Send */ + KEY(0, 2, KEY_BACK), /* End */ + KEY(1, 1, KEY_CONFIG), /* Half shot */ + KEY(1, 2, KEY_VOLUMEUP), + KEY(2, 1, KEY_CAMERA), /* Full shot */ + KEY(2, 2, KEY_VOLUMEDOWN), +}; + +static struct matrix_keymap_data keymap_data __initdata = { + .keymap = keymap, + .keymap_size = ARRAY_SIZE(keymap), +}; + +static struct samsung_keypad_platdata keypad_data __initdata = { + .keymap_data = &keymap_data, + .rows = 3, + .cols = 3, +}; + +/* Radio */ +static struct i2c_board_info i2c1_devs[] __initdata = { + { + I2C_BOARD_INFO("si470x", 0x10), + }, +}; + +static void __init goni_radio_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */ + gpio_request(gpio, "FM_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + i2c1_devs[0].irq = gpio_to_irq(gpio); + + gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ + gpio_request(gpio, "FM_RST"); + gpio_direction_output(gpio, 1); +} + +/* TSP */ +static struct qt602240_platform_data qt602240_platform_data = { + .x_line = 17, + .y_line = 11, + .x_size = 800, + .y_size = 480, + .blen = 0x21, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = QT602240_DIAGONAL, +}; + +static struct s3c2410_platform_i2c i2c2_data __initdata = { + .flags = 0, + .bus_num = 2, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c2_devs[] __initdata = { + { + I2C_BOARD_INFO("qt602240_ts", 0x4a), + .platform_data = &qt602240_platform_data, + }, +}; + +static void __init goni_tsp_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ + gpio_request(gpio, "TSP_LDO_ON"); + gpio_direction_output(gpio, 1); + gpio_export(gpio, 0); + + gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ + gpio_request(gpio, "TSP_INT"); + + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + i2c2_devs[0].irq = gpio_to_irq(gpio); +} + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) +static struct regulator_consumer_supply goni_ldo5_consumers[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + static struct regulator_init_data goni_ldo2_data = { .constraints = { .name = "VALIVE_1.1V", @@ -153,6 +312,8 @@ static struct regulator_init_data goni_ldo5_data = { .max_uV = 2800000, .apply_uV = 1, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), + .consumer_supplies = goni_ldo5_consumers, }; static struct regulator_init_data goni_ldo6_data = { @@ -360,6 +521,119 @@ static struct max8998_platform_data goni_max8998_pdata = { }; #endif +static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + /* GPIO I2C PMIC */ #define AP_I2C_GPIO_PMIC_BUS_4 4 static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = { @@ -385,6 +659,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { #endif }; +/* GPIO I2C AP 1.8V */ +#define AP_I2C_GPIO_BUS_5 5 +static struct i2c_gpio_platform_data goni_i2c_gpio5_data = { + .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ + .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ +}; + +static struct platform_device goni_i2c_gpio5 = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_BUS_5, + .dev = { + .platform_data = &goni_i2c_gpio5_data, + }, +}; + +static struct i2c_board_info i2c_gpio5_devs[] __initdata = { + { + /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ + I2C_BOARD_INFO("wm8994", 0x1a), + .platform_data = &wm8994_platform_data, + }, +}; + /* PMIC Power button */ static struct gpio_keys_button goni_gpio_keys_table[] = { { @@ -444,11 +741,37 @@ static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = { .ext_cd_gpio_invert = 1, }; +static struct regulator_consumer_supply mmc2_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), +}; + +static struct regulator_init_data mmc2_fixed_voltage_init_data = { + .constraints = { + .name = "V_TF_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies), + .consumer_supplies = mmc2_supplies, +}; + +static struct fixed_voltage_config mmc2_fixed_voltage_config = { + .supply_name = "EXT_FLASH_EN", + .microvolts = 2800000, + .gpio = GONI_EXT_FLASH_EN, + .enable_high = true, + .init_data = &mmc2_fixed_voltage_init_data, +}; + +static struct platform_device mmc2_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &mmc2_fixed_voltage_config, + }, +}; + static void goni_setup_sdhci(void) { - gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN"); - gpio_direction_output(GONI_EXT_FLASH_EN, 1); - s3c_sdhci0_set_platdata(&goni_hsmmc0_data); s3c_sdhci1_set_platdata(&goni_hsmmc1_data); s3c_sdhci2_set_platdata(&goni_hsmmc2_data); @@ -457,7 +780,10 @@ static void goni_setup_sdhci(void) static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, + &goni_spi_gpio, &goni_i2c_gpio_pmic, + &goni_i2c_gpio5, + &mmc2_fixed_voltage, &goni_device_gpiokeys, &s5p_device_fimc0, &s5p_device_fimc1, @@ -465,8 +791,24 @@ static struct platform_device *goni_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, + &s5pv210_device_iis0, + &s3c_device_usb_hsotg, + &samsung_device_keypad, + &s3c_device_i2c1, + &s3c_device_i2c2, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, }; +static void __init goni_sound_init(void) +{ + /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. + * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) + * because it needs 24MHz clock to operate WM8994 codec. + */ + __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); +} + static void __init goni_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -476,6 +818,20 @@ static void __init goni_map_io(void) static void __init goni_machine_init(void) { + /* Radio: call before I2C 1 registeration */ + goni_radio_init(); + + /* I2C1 */ + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + /* TSP: call before I2C 2 registeration */ + goni_tsp_init(); + + /* I2C2 */ + s3c_i2c2_set_platdata(&i2c2_data); + i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs)); + /* PMIC */ goni_pmic_init(); i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, @@ -483,9 +839,22 @@ static void __init goni_machine_init(void) /* SDHCI */ goni_setup_sdhci(); + /* SOUND */ + goni_sound_init(); + i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, + ARRAY_SIZE(i2c_gpio5_devs)); + /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + /* SPI */ + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + /* KEYPAD */ + samsung_keypad_set_platdata(&keypad_data); + + clk_xusbxti.rate = 24000000; + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index cea9bca79d8..0ad7924fe62 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -28,6 +28,7 @@ #include <plat/cpu.h> #include <plat/ata.h> #include <plat/iic.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -81,6 +82,7 @@ static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = { static struct platform_device *smdkc110_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s5pv210_device_spdif, &s3c_device_cfcon, &s3c_device_i2c0, &s3c_device_i2c1, @@ -110,6 +112,8 @@ static void __init smdkc110_map_io(void) static void __init smdkc110_machine_init(void) { + s3c_pm_init(); + s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_i2c2_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 83189ae9da9..bcd7a5d5340 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -31,6 +31,7 @@ #include <plat/ata.h> #include <plat/iic.h> #include <plat/keypad.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -103,6 +104,7 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s5pv210_device_spdif, &s3c_device_adc, &s3c_device_cfcon, &s3c_device_hsmmc0, @@ -145,6 +147,8 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + s3c_pm_init(); + samsung_keypad_set_platdata(&smdkv210_keypad_data); s3c24xx_ts_set_platdata(&s3c_ts_platform); diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c new file mode 100644 index 00000000000..043c938806b --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -0,0 +1,131 @@ +/* linux/arch/arm/mach-s5pv210/mach-torbreck.c + * + * Copyright (c) 2010 aESOP Community + * http://www.aesop.or.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, +}; + +static struct platform_device *torbreck_devices[] __initdata = { + &s5pv210_device_iis0, + &s3c_device_cfcon, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c2, + &s3c_device_rtc, + &s3c_device_wdt, +}; + +static struct i2c_board_info torbreck_i2c_devs0[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs1[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { + /* To Be Updated */ +}; + +static void __init torbreck_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); +} + +static void __init torbreck_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + s3c_i2c2_set_platdata(NULL); + i2c_register_board_info(0, torbreck_i2c_devs0, + ARRAY_SIZE(torbreck_i2c_devs0)); + i2c_register_board_info(1, torbreck_i2c_devs1, + ARRAY_SIZE(torbreck_i2c_devs1)); + i2c_register_board_info(2, torbreck_i2c_devs2, + ARRAY_SIZE(torbreck_i2c_devs2)); + + platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices)); +} + +MACHINE_START(TORBRECK, "TORBRECK") + /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = torbreck_map_io, + .init_machine = torbreck_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c new file mode 100644 index 00000000000..549d7924fd4 --- /dev/null +++ b/arch/arm/mach-s5pv210/pm.c @@ -0,0 +1,166 @@ +/* linux/arch/arm/mach-s5pv210/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 - Power Management support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/io.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-timer.h> + +#include <mach/regs-irq.h> +#include <mach/regs-clock.h> + +static struct sleep_save s5pv210_core_save[] = { + /* Clock source */ + SAVE_ITEM(S5P_CLK_SRC0), + SAVE_ITEM(S5P_CLK_SRC1), + SAVE_ITEM(S5P_CLK_SRC2), + SAVE_ITEM(S5P_CLK_SRC3), + SAVE_ITEM(S5P_CLK_SRC4), + SAVE_ITEM(S5P_CLK_SRC5), + SAVE_ITEM(S5P_CLK_SRC6), + + /* Clock source Mask */ + SAVE_ITEM(S5P_CLK_SRC_MASK0), + SAVE_ITEM(S5P_CLK_SRC_MASK1), + + /* Clock Divider */ + SAVE_ITEM(S5P_CLK_DIV0), + SAVE_ITEM(S5P_CLK_DIV1), + SAVE_ITEM(S5P_CLK_DIV2), + SAVE_ITEM(S5P_CLK_DIV3), + SAVE_ITEM(S5P_CLK_DIV4), + SAVE_ITEM(S5P_CLK_DIV5), + SAVE_ITEM(S5P_CLK_DIV6), + SAVE_ITEM(S5P_CLK_DIV7), + + /* Clock Main Gate */ + SAVE_ITEM(S5P_CLKGATE_MAIN0), + SAVE_ITEM(S5P_CLKGATE_MAIN1), + SAVE_ITEM(S5P_CLKGATE_MAIN2), + + /* Clock source Peri Gate */ + SAVE_ITEM(S5P_CLKGATE_PERI0), + SAVE_ITEM(S5P_CLKGATE_PERI1), + + /* Clock source SCLK Gate */ + SAVE_ITEM(S5P_CLKGATE_SCLK0), + SAVE_ITEM(S5P_CLKGATE_SCLK1), + + /* Clock IP Clock gate */ + SAVE_ITEM(S5P_CLKGATE_IP0), + SAVE_ITEM(S5P_CLKGATE_IP1), + SAVE_ITEM(S5P_CLKGATE_IP2), + SAVE_ITEM(S5P_CLKGATE_IP3), + SAVE_ITEM(S5P_CLKGATE_IP4), + + /* Clock Blcok and Bus gate */ + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKGATE_BUS0), + + /* Clock ETC */ + SAVE_ITEM(S5P_CLK_OUT), + SAVE_ITEM(S5P_MDNIE_SEL), + + /* PWM Register */ + SAVE_ITEM(S3C2410_TCFG0), + SAVE_ITEM(S3C2410_TCFG1), + SAVE_ITEM(S3C64XX_TINT_CSTAT), + SAVE_ITEM(S3C2410_TCON), + SAVE_ITEM(S3C2410_TCNTB(0)), + SAVE_ITEM(S3C2410_TCMPB(0)), + SAVE_ITEM(S3C2410_TCNTO(0)), +}; + +void s5pv210_cpu_suspend(void) +{ + unsigned long tmp; + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "wfi" : : "r" (tmp)); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +static void s5pv210_pm_prepare(void) +{ + unsigned int tmp; + + /* ensure at least INFORM0 has the resume address */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + + tmp = __raw_readl(S5P_SLEEP_CFG); + tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); + __raw_writel(tmp, S5P_SLEEP_CFG); + + /* WFI for SLEEP mode configuration by SYSCON */ + tmp = __raw_readl(S5P_PWR_CFG); + tmp &= S5P_CFG_WFI_CLEAN; + tmp |= S5P_CFG_WFI_SLEEP; + __raw_writel(tmp, S5P_PWR_CFG); + + /* SYSCON interrupt handling disable */ + tmp = __raw_readl(S5P_OTHERS); + tmp |= S5P_OTHER_SYSC_INTOFF; + __raw_writel(tmp, S5P_OTHERS); + + s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); +} + +static int s5pv210_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s5pv210_pm_prepare; + pm_cpu_sleep = s5pv210_cpu_suspend; + + return 0; +} + +static int s5pv210_pm_resume(struct sys_device *dev) +{ + u32 tmp; + + tmp = __raw_readl(S5P_OTHERS); + tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\ + S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART); + __raw_writel(tmp , S5P_OTHERS); + + s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); + + return 0; +} + +static struct sysdev_driver s5pv210_pm_driver = { + .add = s5pv210_pm_add, + .resume = s5pv210_pm_resume, +}; + +static __init int s5pv210_pm_drvinit(void) +{ + return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); +} +arch_initcall(s5pv210_pm_drvinit); diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c index 928cf1f125f..e932ebfac56 100644 --- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -21,33 +21,21 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -void s5pv210_fb_gpio_setup_24bpp(void) +static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr) { - unsigned int gpio = 0; - - for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2)); - for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + for (; nr > 0; nr--, base++) + s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); +} - for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } +void s5pv210_fb_gpio_setup_24bpp(void) +{ + s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8); + s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8); + s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8); + s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4); /* Set DISPLAY_CONTROL register for Display path selection. * diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index d38f7cb7e66..0f1cc3a1c1e 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c index 148bb7857d8..f61365a34c5 100644 --- a/arch/arm/mach-s5pv210/setup-i2c1.c +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c index 2396cb8c373..2f91b5cefbc 100644 --- a/arch/arm/mach-s5pv210/setup-i2c2.c +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c2_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c index b558b1cc8d6..ea123d546bd 100644 --- a/arch/arm/mach-s5pv210/setup-ide.c +++ b/arch/arm/mach-s5pv210/setup-ide.c @@ -15,36 +15,25 @@ #include <plat/gpio-cfg.h> +static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr) +{ + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4)); + + for (; nr > 0; nr--, base++) + s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); +} + void s5pv210_ide_setup_gpio(void) { - unsigned int gpio = 0; - - for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) { - /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, - CF_DMACK */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) { - /*CF_Data[0 - 7] */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) { - /* CF_Data[8 - 15] */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) { - /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8); + + /* CF_Data[0 - 7] */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8); + + /* CF_Data[8 - 15] */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8); + + /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4); } diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c index 37b2790aafc..c56420a52f4 100644 --- a/arch/arm/mach-s5pv210/setup-keypad.c +++ b/arch/arm/mach-s5pv210/setup-keypad.c @@ -16,19 +16,9 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) { - unsigned int gpio, end; - /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ - end = S5PV210_GPH3(rows); - for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3)); /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ - end = S5PV210_GPH2(cols); - for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index b18587b1ec5..746777d56df 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -26,26 +26,17 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ - for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2)); + switch (width) { case 8: /* GPG1[3:6] special-funtion 3 */ - for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); case 4: /* GPG0[3:6] special-funtion 2 */ - for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); default: break; } @@ -59,19 +50,12 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; /* Set all the necessary GPG1[0:1] pins to special-function 2 */ - for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2)); /* Data pin GPG1[3:6] to special-function 2 */ - for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); @@ -82,27 +66,17 @@ void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; /* Set all the necessary GPG2[0:1] pins to special-function 2 */ - for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2)); switch (width) { case 8: /* Data pin GPG3[3:6] to special-function 3 */ - for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3)); case 4: /* Data pin GPG2[3:6] to special-function 2 */ - for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2)); default: break; } @@ -116,19 +90,12 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - /* Set all the necessary GPG3[0:2] pins to special-function 2 */ - for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + /* Set all the necessary GPG3[0:1] pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2)); /* Data pin GPG3[3:6] to special-function 2 */ - for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S new file mode 100644 index 00000000000..d4d222b716b --- /dev/null +++ b/arch/arm/mach-s5pv210/sleep.S @@ -0,0 +1,170 @@ +/* linux/arch/arm/plat-s5p/sleep.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 power Manager (Suspend-To-RAM) support + * Based on S3C2410 sleep code by: + * Ben Dooks, (c) 2004 Simtec Electronics + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/memory.h> + + .text + + /* s3c_cpu_save + * + * entry: + * r0 = save address (virtual addr of s3c_sleep_save_phys) + */ + +ENTRY(s3c_cpu_save) + + stmfd sp!, { r3 - r12, lr } + + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mrc p15, 0, r12, c10, c2, 0 @ Read PRRR + mrc p15, 0, r3, c10, c2, 1 @ READ NMRR + + stmia r0, { r3 - r13 } + + bl s3c_pm_cb_flushcache + + ldr r0, =pm_cpu_sleep + ldr r0, [ r0 ] + mov pc, r0 + +resume_with_mmu: + /* + * After MMU is turned on, restore the previous MMU table. + */ + ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) + add r4, r4, r9 + str r12, [r4] + + ldmfd sp!, { r3 - r12, pc } + + .ltorg + + .data + + .global s3c_sleep_save_phys +s3c_sleep_save_phys: + .word 0 + + /* sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s3c_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + msr cpsr_c, r0 + + mov r1, #0 + mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache + + ldr r0, s3c_sleep_save_phys @ address of restore block + ldmia r0, { r3 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + + mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control + mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB + + mov r0, #0 @ restore copro access + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access + mcr p15, 0, r0, c7, c5, 4 + + mcr p15, 0, r12, c10, c2, 0 @ write PRRR + mcr p15, 0, r3, c10, c2, 1 @ write NMRR + + /* + * In Cortex-A8, when MMU is turned on, the pipeline is flushed. + * And there are no valid entries in the MMU table at this point. + * So before turning on the MMU, the MMU entry for the DRAM address + * range is added. After the MMU is turned on, the other entries + * in the MMU table will be restored. + */ + + /* r6 = Translation Table BASE0 */ + mov r4, r6 + mov r4, r4, LSR #14 + mov r4, r4, LSL #14 + + /* Load address for adding to MMU table list */ + ldr r11, =0xE010F000 @ INFORM0 reg. + ldr r10, [r11, #0] + mov r10, r10, LSR #18 + bic r10, r10, #0x3 + orr r4, r4, r10 + + /* Calculate MMU table entry */ + mov r10, r10, LSL #18 + ldr r5, =0x40E + orr r10, r10, r5 + + /* Back up originally data */ + ldr r12, [r4] + + /* Add calculated MMU table entry into MMU table list */ + str r10, [r4] + + ldr r2, =resume_with_mmu + mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc + + nop + nop + nop + nop + nop @ second-to-last before mmu + + mov pc, r2 @ go back to virtual address + + .ltorg |