diff options
Diffstat (limited to 'arch/arm/mach-sa1100/collie.c')
| -rw-r--r-- | arch/arm/mach-sa1100/collie.c | 85 |
1 files changed, 77 insertions, 8 deletions
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index bbf2ebcc306..9982c5c28ed 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -26,6 +26,7 @@ #include <linux/mtd/partitions.h> #include <linux/timer.h> #include <linux/gpio.h> +#include <linux/pda_power.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -56,6 +57,7 @@ static struct resource collie_scoop_resources[] = { static struct scoop_config collie_scoop_setup = { .io_dir = COLLIE_SCOOP_IO_DIR, .io_out = COLLIE_SCOOP_IO_OUT, + .gpio_base = COLLIE_SCOOP_GPIO_BASE, }; struct platform_device colliescoop_device = { @@ -85,6 +87,70 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, + .gpio_base = COLLIE_TC35143_GPIO_BASE, +}; + +/* + * Collie AC IN + */ +static int collie_power_init(struct device *dev) +{ + int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in"); + if (ret) + goto err_gpio_req; + + ret = gpio_direction_input(COLLIE_GPIO_AC_IN); + if (ret) + goto err_gpio_in; + + return 0; + +err_gpio_in: + gpio_free(COLLIE_GPIO_AC_IN); +err_gpio_req: + return ret; +} + +static void collie_power_exit(struct device *dev) +{ + gpio_free(COLLIE_GPIO_AC_IN); +} + +static int collie_power_ac_online(void) +{ + return gpio_get_value(COLLIE_GPIO_AC_IN) == 2; +} + +static char *collie_ac_supplied_to[] = { + "main-battery", + "backup-battery", +}; + +static struct pda_power_pdata collie_power_data = { + .init = collie_power_init, + .is_ac_online = collie_power_ac_online, + .exit = collie_power_exit, + .supplied_to = collie_ac_supplied_to, + .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to), +}; + +static struct resource collie_power_resource[] = { + { + .name = "ac", + .start = gpio_to_irq(COLLIE_GPIO_AC_IN), + .end = gpio_to_irq(COLLIE_GPIO_AC_IN), + .flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct platform_device collie_power_device = { + .name = "pda-power", + .id = -1, + .dev.platform_data = &collie_power_data, + .resource = collie_power_resource, + .num_resources = ARRAY_SIZE(collie_power_resource), }; #ifdef CONFIG_SHARP_LOCOMO @@ -178,6 +244,7 @@ struct platform_device collie_locomo_device = { static struct platform_device *devices[] __initdata = { &collie_locomo_device, &colliescoop_device, + &collie_power_device, }; static struct mtd_partition collie_partitions[] = { @@ -248,22 +315,24 @@ static void __init collie_init(void) GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | - COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON | - COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; + _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON | + _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY | - COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC; + PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY | + _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC; - PGSR = COLLIE_GPIO_nREMOCON_ON; + PGSR = _COLLIE_GPIO_nREMOCON_ON; PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4; PCFR = PCFR_OPDE; + GPSR |= _COLLIE_GPIO_UCB1x00_RESET; + platform_scoop_config = &collie_pcmcia_config; @@ -272,9 +341,9 @@ static void __init collie_init(void) printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); } - sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources, - ARRAY_SIZE(collie_flash_resources)); - sa11x0_set_mcp_data(&collie_mcp_data); + sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, + ARRAY_SIZE(collie_flash_resources)); + sa11x0_register_mcp(&collie_mcp_data); sharpsl_save_param(); } |