diff options
Diffstat (limited to 'arch/arm/mach-sa1100/include/mach/irqs.h')
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/irqs.h | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h new file mode 100644 index 00000000000..0cb36609b3a --- /dev/null +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -0,0 +1,197 @@ +/* + * arch/arm/mach-sa1100/include/mach/irqs.h + * + * Copyright (C) 1996 Russell King + * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus). + * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation) + * + * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. + */ + +#define IRQ_GPIO0 0 +#define IRQ_GPIO1 1 +#define IRQ_GPIO2 2 +#define IRQ_GPIO3 3 +#define IRQ_GPIO4 4 +#define IRQ_GPIO5 5 +#define IRQ_GPIO6 6 +#define IRQ_GPIO7 7 +#define IRQ_GPIO8 8 +#define IRQ_GPIO9 9 +#define IRQ_GPIO10 10 +#define IRQ_GPIO11_27 11 +#define IRQ_LCD 12 /* LCD controller */ +#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */ +#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */ +#define IRQ_Ser1UART 15 /* Ser. port 1 UART */ +#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */ +#define IRQ_Ser3UART 17 /* Ser. port 3 UART */ +#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */ +#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */ +#define IRQ_DMA0 20 /* DMA controller channel 0 */ +#define IRQ_DMA1 21 /* DMA controller channel 1 */ +#define IRQ_DMA2 22 /* DMA controller channel 2 */ +#define IRQ_DMA3 23 /* DMA controller channel 3 */ +#define IRQ_DMA4 24 /* DMA controller channel 4 */ +#define IRQ_DMA5 25 /* DMA controller channel 5 */ +#define IRQ_OST0 26 /* OS Timer match 0 */ +#define IRQ_OST1 27 /* OS Timer match 1 */ +#define IRQ_OST2 28 /* OS Timer match 2 */ +#define IRQ_OST3 29 /* OS Timer match 3 */ +#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */ +#define IRQ_RTCAlrm 31 /* RTC Alarm */ + +#define IRQ_GPIO11 32 +#define IRQ_GPIO12 33 +#define IRQ_GPIO13 34 +#define IRQ_GPIO14 35 +#define IRQ_GPIO15 36 +#define IRQ_GPIO16 37 +#define IRQ_GPIO17 38 +#define IRQ_GPIO18 39 +#define IRQ_GPIO19 40 +#define IRQ_GPIO20 41 +#define IRQ_GPIO21 42 +#define IRQ_GPIO22 43 +#define IRQ_GPIO23 44 +#define IRQ_GPIO24 45 +#define IRQ_GPIO25 46 +#define IRQ_GPIO26 47 +#define IRQ_GPIO27 48 + +/* + * The next 16 interrupts are for board specific purposes. Since + * the kernel can only run on one machine at a time, we can re-use + * these. If you need more, increase IRQ_BOARD_END, but keep it + * within sensible limits. IRQs 49 to 64 are available. + */ +#define IRQ_BOARD_START 49 +#define IRQ_BOARD_END 65 + +#define IRQ_SA1111_START (IRQ_BOARD_END) +#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) +#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) +#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) +#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) +#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) +#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) +#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) +#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) +#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) +#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) +#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) +#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) +#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) +#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) +#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) +#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) +#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) +#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) +#define IRQ_MSTXINT (IRQ_BOARD_END + 18) +#define IRQ_MSRXINT (IRQ_BOARD_END + 19) +#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) +#define IRQ_TPTXINT (IRQ_BOARD_END + 21) +#define IRQ_TPRXINT (IRQ_BOARD_END + 22) +#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) +#define SSPXMTINT (IRQ_BOARD_END + 24) +#define SSPRCVINT (IRQ_BOARD_END + 25) +#define SSPROR (IRQ_BOARD_END + 26) +#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) +#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) +#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) +#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) +#define AUDTFSR (IRQ_BOARD_END + 36) +#define AUDRFSR (IRQ_BOARD_END + 37) +#define AUDTUR (IRQ_BOARD_END + 38) +#define AUDROR (IRQ_BOARD_END + 39) +#define AUDDTS (IRQ_BOARD_END + 40) +#define AUDRDD (IRQ_BOARD_END + 41) +#define AUDSTO (IRQ_BOARD_END + 42) +#define IRQ_USBPWR (IRQ_BOARD_END + 43) +#define IRQ_HCIM (IRQ_BOARD_END + 44) +#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) +#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) +#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) +#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) +#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) +#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) +#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) +#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) +#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) +#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) + +#define IRQ_LOCOMO_START (IRQ_BOARD_END) +#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) +#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) +#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) +#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) +#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) +#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) +#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) +#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) +#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) +#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) +#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) +#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) +#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) +#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) +#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) +#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) +#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) +#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) +#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) +#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) +#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20) +#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) + +/* + * Figure out the MAX IRQ number. + * + * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. + * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 + * Otherwise, we have the standard IRQs only. + */ +#ifdef CONFIG_SA1111 +#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) +#elif defined(CONFIG_SA1100_H3800) +#define NR_IRQS (IRQ_BOARD_END) +#elif defined(CONFIG_SHARP_LOCOMO) +#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) +#else +#define NR_IRQS (IRQ_BOARD_START) +#endif + +/* + * Board specific IRQs. Define them here. + * Do not surround them with ifdefs. + */ +#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) +#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) +#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) + +/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ +#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) +#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) +#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) +#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) + +/* H3800-specific IRQs (CONFIG_SA1100_H3800) */ +#define H3800_KPIO_IRQ_START (IRQ_BOARD_START) +#define IRQ_H3800_KEY (IRQ_BOARD_START + 0) +#define IRQ_H3800_SPI (IRQ_BOARD_START + 1) +#define IRQ_H3800_OWM (IRQ_BOARD_START + 2) +#define IRQ_H3800_ADC (IRQ_BOARD_START + 3) +#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4) +#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5) +#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6) +#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7) +#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8) +#define H3800_KPIO_IRQ_COUNT 9 + +#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9) +#define IRQ_H3800_PEN (IRQ_BOARD_START + 9) +#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10) +#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11) +#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12) +#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13) +#define H3800_GPIO_IRQ_COUNT 5 |