summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-sa1100/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-sa1100/include')
-rw-r--r--arch/arm/mach-sa1100/include/mach/collie.h77
-rw-r--r--arch/arm/mach-sa1100/include/mach/gpio.h19
-rw-r--r--arch/arm/mach-sa1100/include/mach/h3600.h100
-rw-r--r--arch/arm/mach-sa1100/include/mach/h3600_gpio.h77
-rw-r--r--arch/arm/mach-sa1100/include/mach/h3xxx.h94
-rw-r--r--arch/arm/mach-sa1100/include/mach/mcp.h1
6 files changed, 143 insertions, 225 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 9efb569cdb6..71a0b3fdcc8 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -25,29 +25,39 @@
#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
-#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
- COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+ COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs for gpiolib */
-#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
-#define COLLIE_GPIO_CO GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26)
+#define COLLIE_GPIO_ON_KEY (0)
+#define COLLIE_GPIO_AC_IN (1)
+#define COLLIE_GPIO_SDIO_INT (11)
+#define COLLIE_GPIO_CF_IRQ (14)
+#define COLLIE_GPIO_nREMOCON_INT (15)
+#define COLLIE_GPIO_UCB1x00_RESET (16)
+#define COLLIE_GPIO_nMIC_ON (17)
+#define COLLIE_GPIO_nREMOCON_ON (18)
+#define COLLIE_GPIO_CO (20)
+#define COLLIE_GPIO_MCP_CLK (21)
+#define COLLIE_GPIO_CF_CD (22)
+#define COLLIE_GPIO_UCB1x00_IRQ (23)
+#define COLLIE_GPIO_WAKEUP (24)
+#define COLLIE_GPIO_GA_INT (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW (26)
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP GPIO_GPIO(24)
/* Interrupts */
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
@@ -70,19 +80,20 @@
#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */
-#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */
-#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */
-#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */
-#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */
-#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */
-#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */
-#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */
-#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */
-#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */
-#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
- UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+#define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2
+#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3
+#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON (COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON (COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON (COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN (UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+ | UCB_IO_6)
#endif
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 582a0c92da5..7befc104e9a 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -49,20 +49,9 @@ static inline void gpio_set_value(unsigned gpio, int value)
#define gpio_cansleep __gpio_cansleep
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- if (gpio < 11)
- return IRQ_GPIO0 + gpio;
- else
- return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIO11_27)
- return irq - IRQ_GPIO0;
- else
- return irq - IRQ_GPIO11 + 11;
-}
+#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
+ (IRQ_GPIO11 - 11 + gpio))
+#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
+ (irq - IRQ_GPIO11 + 11))
#endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa4742..00000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-?? Andrew Christian Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */
-#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT 0xf0000000
-#define H3600_BANK_2_VIRT 0xf1000000
-#define H3600_BANK_4_VIRT 0xf3800000
-
-/*
- Machine-independent GPIO definitions
- --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON GPIO_GPIO (0) /* Also known as the "off button" */
-
-#define GPIO_H3600_PCMCIA_CD1 GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1 GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0 GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0 GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1 IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1 IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0 IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0 IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
- IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */
- IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */
- IPAQ_EGPIO_AUDIO_ON, /* Audio power */
- IPAQ_EGPIO_QMUTE, /* Audio muting */
- IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */
- IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */
- IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */
- IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */
- IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */
- IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */
- IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */
- IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */
- IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
deleted file mode 100644
index a36ca76d018..00000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-?? Andrew Christian Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3 GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET GPIO_GPIO (20) /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON (1 << 0)
-#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
-#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */
-#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */
-#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */
-#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */
-#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */
-#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */
-#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */
-#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */
-#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
-
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 00000000000..7d9df16f04a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,94 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT 0xf0000000
+#define H3600_BANK_2_VIRT 0xf1000000
+#define H3600_BANK_4_VIRT 0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON 0
+#define H3XXX_GPIO_PCMCIA_CD1 10
+#define H3XXX_GPIO_PCMCIA_IRQ1 11
+#define H3XXX_GPIO_PCMCIA_CD0 17
+#define H3XXX_GPIO_ACTION_BUTTON 18
+#define H3XXX_GPIO_SYS_CLK 19
+#define H3XXX_GPIO_PCMCIA_IRQ0 21
+#define H3XXX_GPIO_COM_DCD 23
+#define H3XXX_GPIO_OPTION 24
+#define H3XXX_GPIO_COM_CTS 25
+#define H3XXX_GPIO_COM_RTS 26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON 2
+#define H3100_GPIO_QMUTE 4
+#define H3100_GPIO_LCD_3V_ON 5
+#define H3100_GPIO_AUD_ON 6
+#define H3100_GPIO_AUD_PWR_ON 7
+#define H3100_GPIO_IR_ON 8
+#define H3100_GPIO_IR_FSEL 9
+
+#define H3600_GPIO_CLK_SET0 12 /* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1 13
+#define H3600_GPIO_SOFT_RESET 20 /* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK 22
+#define H3600_GPIO_OPT_DET 27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE (GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON (H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card. active high. */
+#define H3XXX_EGPIO_OPT_RESET (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack. active high. */
+#define H3XXX_EGPIO_CODEC_NRESET (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341. active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON (H3XXX_EGPIO_BASE + 5) /* full power to option pack. active high. */
+#define H3XXX_EGPIO_LCD_ON (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD. active high. */
+#define H3XXX_EGPIO_RS232_ON (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on. Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable. active high. */
+#define H3600_EGPIO_IR_ON (H3XXX_EGPIO_BASE + 9) /* apply power to IR module. active high. */
+#define H3600_EGPIO_AUD_AMP_ON (H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp. active high. */
+#define H3600_EGPIO_AUD_PWR_ON (H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit. active high. */
+#define H3600_EGPIO_QMUTE (H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341. active high. */
+#define H3600_EGPIO_IR_FSEL (H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+struct gpio_default_state {
+ int gpio;
+ int mode;
+ const char *name;
+};
+
+#define GPIO_MODE_IN -1
+#define GPIO_MODE_OUT0 0
+#define GPIO_MODE_OUT1 1
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index fb8b09a57ad..ed1a331508a 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,6 +16,7 @@ struct mcp_plat_data {
u32 mccr0;
u32 mccr1;
unsigned int sclk_rate;
+ int gpio_base;
};
#endif