summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-sa1100/neponset.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-sa1100/neponset.c')
-rw-r--r--arch/arm/mach-sa1100/neponset.c549
1 files changed, 319 insertions, 230 deletions
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index b4fa53a1427..6c58f01b358 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -1,89 +1,104 @@
/*
* linux/arch/arm/mach-sa1100/neponset.c
- *
*/
-#include <linux/kernel.h>
+#include <linux/err.h>
#include <linux/init.h>
-#include <linux/tty.h>
#include <linux/ioport.h>
-#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
-#include <mach/assabet.h>
-#include <mach/neponset.h>
#include <asm/hardware/sa1111.h>
#include <asm/sizes.h>
-/*
- * Install handler for Neponset IRQ. Note that we have to loop here
- * since the ETHERNET and USAR IRQs are level based, and we need to
- * ensure that the IRQ signal is deasserted before returning. This
- * is rather unfortunate.
- */
-static void
-neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int irr;
-
- while (1) {
- /*
- * Acknowledge the parent IRQ.
- */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- /*
- * Read the interrupt reason register. Let's have all
- * active IRQ bits high. Note: there is a typo in the
- * Neponset user's guide for the SA1111 IRR level.
- */
- irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
-
- if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
- break;
-
- /*
- * Since there is no individual mask, we have to
- * mask the parent IRQ. This is safe, since we'll
- * recheck the register for any pending IRQs.
- */
- if (irr & (IRR_ETHERNET | IRR_USAR)) {
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
- /*
- * Ack the interrupt now to prevent re-entering
- * this neponset handler. Again, this is safe
- * since we'll check the IRR register prior to
- * leaving.
- */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
+#include <mach/hardware.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
+#include <mach/irqs.h>
+
+#define NEP_IRQ_SMC91X 0
+#define NEP_IRQ_USAR 1
+#define NEP_IRQ_SA1111 2
+#define NEP_IRQ_NR 3
+
+#define WHOAMI 0x00
+#define LEDS 0x10
+#define SWPK 0x20
+#define IRR 0x24
+#define KP_Y_IN 0x80
+#define KP_X_OUT 0x90
+#define NCR_0 0xa0
+#define MDM_CTL_0 0xb0
+#define MDM_CTL_1 0xb4
+#define AUD_CTL 0xc0
+
+#define IRR_ETHERNET (1 << 0)
+#define IRR_USAR (1 << 1)
+#define IRR_SA1111 (1 << 2)
+
+#define MDM_CTL0_RTS1 (1 << 0)
+#define MDM_CTL0_DTR1 (1 << 1)
+#define MDM_CTL0_RTS2 (1 << 2)
+#define MDM_CTL0_DTR2 (1 << 3)
+
+#define MDM_CTL1_CTS1 (1 << 0)
+#define MDM_CTL1_DSR1 (1 << 1)
+#define MDM_CTL1_DCD1 (1 << 2)
+#define MDM_CTL1_CTS2 (1 << 3)
+#define MDM_CTL1_DSR2 (1 << 4)
+#define MDM_CTL1_DCD2 (1 << 5)
+
+#define AUD_SEL_1341 (1 << 0)
+#define AUD_MUTE_1341 (1 << 1)
- if (irr & IRR_ETHERNET) {
- generic_handle_irq(IRQ_NEPONSET_SMC9196);
- }
+extern void sa1110_mb_disable(void);
- if (irr & IRR_USAR) {
- generic_handle_irq(IRQ_NEPONSET_USAR);
- }
+struct neponset_drvdata {
+ void __iomem *base;
+ struct platform_device *sa1111;
+ struct platform_device *smc91x;
+ unsigned irq_base;
+#ifdef CONFIG_PM_SLEEP
+ u32 ncr0;
+ u32 mdm_ctl_0;
+#endif
+};
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
- }
+static void __iomem *nep_base;
- if (irr & IRR_SA1111) {
- generic_handle_irq(IRQ_NEPONSET_SA1111);
- }
+void neponset_ncr_frob(unsigned int mask, unsigned int val)
+{
+ void __iomem *base = nep_base;
+
+ if (base) {
+ unsigned long flags;
+ unsigned v;
+
+ local_irq_save(flags);
+ v = readb_relaxed(base + NCR_0);
+ writeb_relaxed((v & ~mask) | val, base + NCR_0);
+ local_irq_restore(flags);
+ } else {
+ WARN(1, "nep_base unset\n");
}
}
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
- u_int mdm_ctl0 = MDM_CTL_0;
+ void __iomem *base = nep_base;
+ u_int mdm_ctl0;
+ if (!base)
+ return;
+
+ mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
if (port->mapbase == _Ser1UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS2;
@@ -106,14 +121,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
mdm_ctl0 |= MDM_CTL0_DTR1;
}
- MDM_CTL_0 = mdm_ctl0;
+ writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
+ void __iomem *base = nep_base;
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
- u_int mdm_ctl1 = MDM_CTL_1;
+ u_int mdm_ctl1;
+
+ if (!base)
+ return ret;
+ mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
@@ -138,209 +158,278 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = {
.get_mctrl = neponset_get_mctrl,
};
-static int __devinit neponset_probe(struct platform_device *dev)
+/*
+ * Install handler for Neponset IRQ. Note that we have to loop here
+ * since the ETHERNET and USAR IRQs are level based, and we need to
+ * ensure that the IRQ signal is deasserted before returning. This
+ * is rather unfortunate.
+ */
+static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
{
- sa1100_register_uart_fns(&neponset_port_fns);
+ struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
+ unsigned int irr;
- /*
- * Install handler for GPIO25.
- */
- irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
- irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler);
+ while (1) {
+ /*
+ * Acknowledge the parent IRQ.
+ */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
- /*
- * We would set IRQ_GPIO25 to be a wake-up IRQ, but
- * unfortunately something on the Neponset activates
- * this IRQ on sleep (ethernet?)
- */
-#if 0
- enable_irq_wake(IRQ_GPIO25);
-#endif
+ /*
+ * Read the interrupt reason register. Let's have all
+ * active IRQ bits high. Note: there is a typo in the
+ * Neponset user's guide for the SA1111 IRR level.
+ */
+ irr = readb_relaxed(d->base + IRR);
+ irr ^= IRR_ETHERNET | IRR_USAR;
- /*
- * Setup other Neponset IRQs. SA1111 will be done by the
- * generic SA1111 code.
- */
- irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq);
- set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
- irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq);
- set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
+ if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
+ break;
- /*
- * Disable GPIO 0/1 drivers so the buttons work on the module.
- */
- NCR_0 = NCR_GP01_OFF;
+ /*
+ * Since there is no individual mask, we have to
+ * mask the parent IRQ. This is safe, since we'll
+ * recheck the register for any pending IRQs.
+ */
+ if (irr & (IRR_ETHERNET | IRR_USAR)) {
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
- return 0;
-}
+ /*
+ * Ack the interrupt now to prevent re-entering
+ * this neponset handler. Again, this is safe
+ * since we'll check the IRR register prior to
+ * leaving.
+ */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
-#ifdef CONFIG_PM
+ if (irr & IRR_ETHERNET)
+ generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
-/*
- * LDM power management.
- */
-static unsigned int neponset_saved_state;
+ if (irr & IRR_USAR)
+ generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
-static int neponset_suspend(struct platform_device *dev, pm_message_t state)
-{
- /*
- * Save state.
- */
- neponset_saved_state = NCR_0;
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ }
- return 0;
+ if (irr & IRR_SA1111)
+ generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
+ }
}
-static int neponset_resume(struct platform_device *dev)
+/* Yes, we really do not have any kind of masking or unmasking */
+static void nochip_noop(struct irq_data *irq)
{
- NCR_0 = neponset_saved_state;
-
- return 0;
}
-#else
-#define neponset_suspend NULL
-#define neponset_resume NULL
-#endif
-
-static struct platform_driver neponset_device_driver = {
- .probe = neponset_probe,
- .suspend = neponset_suspend,
- .resume = neponset_resume,
- .driver = {
- .name = "neponset",
- },
-};
-
-static struct resource neponset_resources[] = {
- [0] = {
- .start = 0x10000000,
- .end = 0x17ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device neponset_device = {
- .name = "neponset",
- .id = 0,
- .num_resources = ARRAY_SIZE(neponset_resources),
- .resource = neponset_resources,
-};
-
-static struct resource sa1111_resources[] = {
- [0] = {
- .start = 0x40000000,
- .end = 0x40001fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_NEPONSET_SA1111,
- .end = IRQ_NEPONSET_SA1111,
- .flags = IORESOURCE_IRQ,
- },
+static struct irq_chip nochip = {
+ .name = "neponset",
+ .irq_ack = nochip_noop,
+ .irq_mask = nochip_noop,
+ .irq_unmask = nochip_noop,
};
static struct sa1111_platform_data sa1111_info = {
- .irq_base = IRQ_BOARD_END,
+ .disable_devs = SA1111_DEVID_PS2_MSE,
};
-static u64 sa1111_dmamask = 0xffffffffUL;
+static int __devinit neponset_probe(struct platform_device *dev)
+{
+ struct neponset_drvdata *d;
+ struct resource *nep_res, *sa1111_res, *smc91x_res;
+ struct resource sa1111_resources[] = {
+ DEFINE_RES_MEM(0x40000000, SZ_8K),
+ { .flags = IORESOURCE_IRQ },
+ };
+ struct platform_device_info sa1111_devinfo = {
+ .parent = &dev->dev,
+ .name = "sa1111",
+ .id = 0,
+ .res = sa1111_resources,
+ .num_res = ARRAY_SIZE(sa1111_resources),
+ .data = &sa1111_info,
+ .size_data = sizeof(sa1111_info),
+ .dma_mask = 0xffffffffUL,
+ };
+ struct resource smc91x_resources[] = {
+ DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
+ 0x02000000, "smc91x-regs"),
+ DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
+ 0x02000000, "smc91x-attrib"),
+ { .flags = IORESOURCE_IRQ },
+ };
+ struct platform_device_info smc91x_devinfo = {
+ .parent = &dev->dev,
+ .name = "smc91x",
+ .id = 0,
+ .res = smc91x_resources,
+ .num_res = ARRAY_SIZE(smc91x_resources),
+ };
+ int ret, irq;
+
+ if (nep_base)
+ return -EBUSY;
+
+ irq = ret = platform_get_irq(dev, 0);
+ if (ret < 0)
+ goto err_alloc;
+
+ nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
+ if (!nep_res || !smc91x_res || !sa1111_res) {
+ ret = -ENXIO;
+ goto err_alloc;
+ }
-static struct platform_device sa1111_device = {
- .name = "sa1111",
- .id = 0,
- .dev = {
- .dma_mask = &sa1111_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sa1111_info,
- },
- .num_resources = ARRAY_SIZE(sa1111_resources),
- .resource = sa1111_resources,
-};
+ d = kzalloc(sizeof(*d), GFP_KERNEL);
+ if (!d) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = SA1100_CS3_PHYS,
- .end = SA1100_CS3_PHYS + 0x01ffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_NEPONSET_SMC9196,
- .end = IRQ_NEPONSET_SMC9196,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = "smc91x-attrib",
- .start = SA1100_CS3_PHYS + 0x02000000,
- .end = SA1100_CS3_PHYS + 0x03ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
+ d->base = ioremap(nep_res->start, SZ_4K);
+ if (!d->base) {
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
+ if (readb_relaxed(d->base + WHOAMI) != 0x11) {
+ dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
+ readb_relaxed(d->base + WHOAMI));
+ ret = -ENODEV;
+ goto err_id;
+ }
-static struct platform_device *devices[] __initdata = {
- &neponset_device,
- &sa1111_device,
- &smc91x_device,
-};
+ ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
+ if (ret <= 0) {
+ dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
+ NEP_IRQ_NR, ret);
+ if (ret == 0)
+ ret = -ENOMEM;
+ goto err_irq_alloc;
+ }
-extern void sa1110_mb_disable(void);
+ d->irq_base = ret;
-static int __init neponset_init(void)
-{
- platform_driver_register(&neponset_device_driver);
+ irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
+ handle_simple_irq);
+ set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE);
+ irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
+ handle_simple_irq);
+ set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE);
+ irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
- /*
- * The Neponset is only present on the Assabet machine type.
- */
- if (!machine_is_assabet())
- return -ENODEV;
+ irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ irq_set_handler_data(irq, d);
+ irq_set_chained_handler(irq, neponset_irq_handler);
/*
- * Ensure that the memory bus request/grant signals are setup,
- * and the grant is held in its inactive state, whether or not
- * we actually have a Neponset attached.
+ * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
+ * something on the Neponset activates this IRQ on sleep (eth?)
*/
+#if 0
+ enable_irq_wake(irq);
+#endif
+
+ dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
+ d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
+ nep_base = d->base;
+
+ sa1100_register_uart_fns(&neponset_port_fns);
+
+ /* Ensure that the memory bus request/grant signals are setup */
sa1110_mb_disable();
- if (!machine_has_neponset()) {
- printk(KERN_DEBUG "Neponset expansion board not present\n");
- return -ENODEV;
- }
+ /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
+ writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
- if (WHOAMI != 0x11) {
- printk(KERN_WARNING "Neponset board detected, but "
- "wrong ID: %02x\n", WHOAMI);
- return -ENODEV;
- }
+ sa1111_resources[0].parent = sa1111_res;
+ sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
+ sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
+ d->sa1111 = platform_device_register_full(&sa1111_devinfo);
+
+ smc91x_resources[0].parent = smc91x_res;
+ smc91x_resources[1].parent = smc91x_res;
+ smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
+ smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
+ d->smc91x = platform_device_register_full(&smc91x_devinfo);
+
+ platform_set_drvdata(dev, d);
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ return 0;
+
+ err_irq_alloc:
+ err_id:
+ iounmap(d->base);
+ err_ioremap:
+ kfree(d);
+ err_alloc:
+ return ret;
}
-subsys_initcall(neponset_init);
+static int __devexit neponset_remove(struct platform_device *dev)
+{
+ struct neponset_drvdata *d = platform_get_drvdata(dev);
+ int irq = platform_get_irq(dev, 0);
+
+ if (!IS_ERR(d->sa1111))
+ platform_device_unregister(d->sa1111);
+ if (!IS_ERR(d->smc91x))
+ platform_device_unregister(d->smc91x);
+ irq_set_chained_handler(irq, NULL);
+ irq_free_descs(d->irq_base, NEP_IRQ_NR);
+ nep_base = NULL;
+ iounmap(d->base);
+ kfree(d);
-static struct map_desc neponset_io_desc[] __initdata = {
- { /* System Registers */
- .virtual = 0xf3000000,
- .pfn = __phys_to_pfn(0x10000000),
- .length = SZ_1M,
- .type = MT_DEVICE
- }, { /* SA-1111 */
- .virtual = 0xf4000000,
- .pfn = __phys_to_pfn(0x40000000),
- .length = SZ_1M,
- .type = MT_DEVICE
- }
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int neponset_suspend(struct device *dev)
+{
+ struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+ d->ncr0 = readb_relaxed(d->base + NCR_0);
+ d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
+
+ return 0;
+}
+
+static int neponset_resume(struct device *dev)
+{
+ struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+ writeb_relaxed(d->ncr0, d->base + NCR_0);
+ writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
+
+ return 0;
+}
+
+static const struct dev_pm_ops neponset_pm_ops = {
+ .suspend_noirq = neponset_suspend,
+ .resume_noirq = neponset_resume,
+ .freeze_noirq = neponset_suspend,
+ .restore_noirq = neponset_resume,
+};
+#define PM_OPS &neponset_pm_ops
+#else
+#define PM_OPS NULL
+#endif
+
+static struct platform_driver neponset_device_driver = {
+ .probe = neponset_probe,
+ .remove = __devexit_p(neponset_remove),
+ .driver = {
+ .name = "neponset",
+ .owner = THIS_MODULE,
+ .pm = PM_OPS,
+ },
};
-void __init neponset_map_io(void)
+static int __init neponset_init(void)
{
- iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
+ return platform_driver_register(&neponset_device_driver);
}
+
+subsys_initcall(neponset_init);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 19:25:10 +0000