summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile/board-ape6evm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-shmobile/board-ape6evm.c')
-rw-r--r--arch/arm/mach-shmobile/board-ape6evm.c61
1 files changed, 51 insertions, 10 deletions
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 24b87eea9da..0fa068e30a3 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -86,7 +86,7 @@ static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"),
};
-static struct __initdata gpio_keys_platform_data ape6evm_keys_pdata = {
+static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
@@ -113,22 +113,58 @@ static const struct smsc911x_platform_config lan9220_data __initconst = {
};
/*
- * On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we
- * model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the
- * static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also
- * supplied by the same tps80032 regulator and thus can also be adjusted
- * dynamically.
+ * MMC0 power supplies:
+ * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage
+ * regulator. Until support for it is added to this file we simulate the
+ * Vcc supply by a fixed always-on regulator
*/
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+static struct regulator_consumer_supply vcc_mmc0_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+};
+
+/*
+ * SDHI0 power supplies:
+ * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is
+ * provided by the same tps80032 regulator as both MMC0 voltages - see comment
+ * above
+ */
+static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
+{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data vcc_sdhi0_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers),
+ .consumer_supplies = vcc_sdhi0_consumers,
+};
+
+static const struct fixed_voltage_config vcc_sdhi0_info __initconst = {
+ .supply_name = "SDHI0 Vcc",
+ .microvolts = 3300000,
+ .gpio = 76,
+ .enable_high = 1,
+ .init_data = &vcc_sdhi0_init_data,
+};
+
+/*
+ * SDHI1 power supplies:
+ * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V
+ */
+static struct regulator_consumer_supply vcc_sdhi1_consumers[] =
+{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
};
/* MMCIF */
static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF0_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF0_RX,
+ .ccs_unsupported = true,
};
static const struct resource mmcif0_resources[] __initconst = {
@@ -215,14 +251,19 @@ static void __init ape6evm_add_standard_devices(void)
platform_device_register_resndata(&platform_bus, "smsc911x", -1,
lan9220_res, ARRAY_SIZE(lan9220_res),
&lan9220_data, sizeof(lan9220_data));
- regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+ regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers,
+ ARRAY_SIZE(vcc_mmc0_consumers), 2800000);
platform_device_register_resndata(&platform_bus, "sh_mmcif", 0,
mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
&mmcif0_pdata, sizeof(mmcif0_pdata));
+ platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2,
+ &vcc_sdhi0_info, sizeof(vcc_sdhi0_info));
platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
&sdhi0_pdata, sizeof(sdhi0_pdata));
+ regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers,
+ ARRAY_SIZE(vcc_sdhi1_consumers), 3300000);
platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
&sdhi1_pdata, sizeof(sdhi1_pdata));
@@ -240,7 +281,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_delay,
+ .init_early = r8a73a4_init_early,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END