diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-armadillo800eva.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-armadillo800eva.c | 300 |
1 files changed, 188 insertions, 112 deletions
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index f2ec0777cfb..7a78f948668 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -28,7 +28,10 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/regulator/driver.h> +#include <linux/pinctrl/machine.h> #include <linux/regulator/fixed.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/sh_eth.h> #include <linux/videodev2.h> @@ -227,7 +230,7 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, static int usbhsf_get_vbus(struct platform_device *pdev) { - return gpio_get_value(GPIO_PORT209); + return gpio_get_value(209); } static irqreturn_t usbhsf_interrupt(int irq, void *data) @@ -535,10 +538,10 @@ static struct platform_device hdmi_lcdc_device = { { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), + GPIO_KEY(KEY_POWER, 99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, 100, "SW4"), + GPIO_KEY(KEY_MENU, 97, "SW5"), + GPIO_KEY(KEY_HOME, 98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -554,15 +557,119 @@ static struct platform_device gpio_keys_device = { }, }; -/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ +/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mmcif"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT75, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* 1.8 / 3.3V SDHI0 VccQ regulator */ +static struct regulator_consumer_supply vccq_sdhi0_consumers[] = { REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vccq_sdhi0_init_data = { + .constraints = { + .input_uV = 3300000, + .min_uV = 1800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers), + .consumer_supplies = vccq_sdhi0_consumers, +}; + +static struct gpio vccq_sdhi0_gpios[] = { + {GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, +}; + +static struct gpio_regulator_state vccq_sdhi0_states[] = { + { .value = 3300000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config vccq_sdhi0_info = { + .supply_name = "vqmmc", + + .enable_gpio = GPIO_PORT74, + .enable_high = 1, + .enabled_at_boot = 0, + + .gpios = vccq_sdhi0_gpios, + .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios), + + .states = vccq_sdhi0_states, + .nr_states = ARRAY_SIZE(vccq_sdhi0_states), + + .type = REGULATOR_VOLTAGE, + .init_data = &vccq_sdhi0_init_data, +}; + +static struct platform_device vccq_sdhi0 = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &vccq_sdhi0_info, + }, +}; + +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vmmc", "sh_mmcif"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + +static struct regulator_init_data vcc_sdhi1_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers), + .consumer_supplies = vcc_sdhi1_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi1_info = { + .supply_name = "SDHI1 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT16, + .enable_high = 1, + .init_data = &vcc_sdhi1_init_data, +}; + +static struct platform_device vcc_sdhi1 = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &vcc_sdhi1_info, + }, }; /* SDHI0 */ @@ -578,10 +685,10 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ - MMC_CAP_NEEDS_POLL, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PORT167, }; static struct resource sdhi0_resources[] = { @@ -620,9 +727,11 @@ static struct platform_device sdhi0_device = { static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + /* Port72 cannot generate IRQs, will be used in polling mode. */ + .cd_gpio = GPIO_PORT72, }; static struct resource sdhi1_resources[] = { @@ -656,10 +765,20 @@ static struct platform_device sdhi1_device = { .resource = sdhi1_resources, }; +static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = { + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_ctrl", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_cd", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_wp", "sdhi1"), +}; + /* MMCIF */ static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, @@ -708,9 +827,9 @@ static int mt9t111_power(struct device *dev, int mode) /* video1 (= CON1 camera) expect 24MHz */ clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); clk_enable(mclk); - gpio_set_value(GPIO_PORT158, 1); + gpio_set_value(158, 1); } else { - gpio_set_value(GPIO_PORT158, 0); + gpio_set_value(158, 0); clk_disable(mclk); } @@ -864,8 +983,8 @@ static struct platform_device fsi_hdmi_device = { /* RTC: RTC connects i2c-gpio. */ static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = GPIO_PORT208, - .scl_pin = GPIO_PORT91, + .sda_pin = 208, + .scl_pin = 91, .udelay = 5, /* 100 kHz */ }; @@ -902,6 +1021,8 @@ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, &gpio_keys_device, &sh_eth_device, + &vcc_sdhi0, + &vccq_sdhi0, &sdhi0_device, &sh_mmcif_device, &hdmi_device, @@ -914,6 +1035,28 @@ static struct platform_device *eva_devices[] __initdata = { &i2c_gpio_device, }; +static const struct pinctrl_map eva_pinctrl_map[] = { + /* LCD0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_data24_0", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_lclk_1", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_sync", "lcd0"), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", + "mmc0_data8_1", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", + "mmc0_ctrl_1", "mmc0"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_wp", "sdhi0"), +}; + static void __init eva_clock_init(void) { struct clk *system = clk_get(NULL, "system_clk"); @@ -961,6 +1104,8 @@ static void __init eva_init(void) regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); + r8a7740_pinmux_init(); r8a7740_meram_workaround(); @@ -970,42 +1115,13 @@ static void __init eva_init(void) /* LCDC0 */ gpio_request(GPIO_FN_LCDC0_SELECT, NULL); - gpio_request(GPIO_FN_LCD0_D0, NULL); - gpio_request(GPIO_FN_LCD0_D1, NULL); - gpio_request(GPIO_FN_LCD0_D2, NULL); - gpio_request(GPIO_FN_LCD0_D3, NULL); - gpio_request(GPIO_FN_LCD0_D4, NULL); - gpio_request(GPIO_FN_LCD0_D5, NULL); - gpio_request(GPIO_FN_LCD0_D6, NULL); - gpio_request(GPIO_FN_LCD0_D7, NULL); - gpio_request(GPIO_FN_LCD0_D8, NULL); - gpio_request(GPIO_FN_LCD0_D9, NULL); - gpio_request(GPIO_FN_LCD0_D10, NULL); - gpio_request(GPIO_FN_LCD0_D11, NULL); - gpio_request(GPIO_FN_LCD0_D12, NULL); - gpio_request(GPIO_FN_LCD0_D13, NULL); - gpio_request(GPIO_FN_LCD0_D14, NULL); - gpio_request(GPIO_FN_LCD0_D15, NULL); - gpio_request(GPIO_FN_LCD0_D16, NULL); - gpio_request(GPIO_FN_LCD0_D17, NULL); - gpio_request(GPIO_FN_LCD0_D18_PORT40, NULL); - gpio_request(GPIO_FN_LCD0_D19_PORT4, NULL); - gpio_request(GPIO_FN_LCD0_D20_PORT3, NULL); - gpio_request(GPIO_FN_LCD0_D21_PORT2, NULL); - gpio_request(GPIO_FN_LCD0_D22_PORT0, NULL); - gpio_request(GPIO_FN_LCD0_D23_PORT1, NULL); - gpio_request(GPIO_FN_LCD0_DCK, NULL); - gpio_request(GPIO_FN_LCD0_VSYN, NULL); - gpio_request(GPIO_FN_LCD0_HSYN, NULL); - gpio_request(GPIO_FN_LCD0_DISP, NULL); - gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - - gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ - gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ + + gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ + gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ + gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ gpio_request(GPIO_FN_ET_CRS, NULL); @@ -1028,12 +1144,12 @@ static void __init eva_init(void) gpio_request(GPIO_FN_ET_RX_DV, NULL); gpio_request(GPIO_FN_ET_RX_CLK, NULL); - gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ + gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ /* USB */ - gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ + gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ - if (gpio_get_value(GPIO_PORT159)) { + if (gpio_get_value(159)) { /* USB Host */ } else { /* USB Func */ @@ -1042,47 +1158,15 @@ static void __init eva_init(void) * OTOH, usbhs interrupt needs its value (HI/LOW) to decide * USB connection/disconnection (usbhsf_get_vbus()). * This means we needs to select GPIO_FN_IRQ7_PORT209 first, - * and select GPIO_PORT209 here + * and select GPIO 209 here */ gpio_request(GPIO_FN_IRQ7_PORT209, NULL); - gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL); + gpio_request_one(209, GPIOF_IN, NULL); platform_device_register(&usbhsf_device); usb = &usbhsf_device; } - /* SDHI0 */ - gpio_request(GPIO_FN_SDHI0_CMD, NULL); - gpio_request(GPIO_FN_SDHI0_CLK, NULL); - gpio_request(GPIO_FN_SDHI0_D0, NULL); - gpio_request(GPIO_FN_SDHI0_D1, NULL); - gpio_request(GPIO_FN_SDHI0_D2, NULL); - gpio_request(GPIO_FN_SDHI0_D3, NULL); - gpio_request(GPIO_FN_SDHI0_WP, NULL); - - gpio_request_one(GPIO_PORT17, GPIOF_OUT_INIT_LOW, NULL); /* SDHI0_18/33_B */ - gpio_request_one(GPIO_PORT74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */ - gpio_request_one(GPIO_PORT75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */ - - /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ - - /* - * MMCIF - * - * Here doesn't care SW1.4 status, - * since CON2 is not mounted. - */ - gpio_request(GPIO_FN_MMC1_CLK_PORT103, NULL); - gpio_request(GPIO_FN_MMC1_CMD_PORT104, NULL); - gpio_request(GPIO_FN_MMC1_D0_PORT149, NULL); - gpio_request(GPIO_FN_MMC1_D1_PORT148, NULL); - gpio_request(GPIO_FN_MMC1_D2_PORT147, NULL); - gpio_request(GPIO_FN_MMC1_D3_PORT146, NULL); - gpio_request(GPIO_FN_MMC1_D4_PORT145, NULL); - gpio_request(GPIO_FN_MMC1_D5_PORT144, NULL); - gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL); - gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL); - /* CEU0 */ gpio_request(GPIO_FN_VIO0_D7, NULL); gpio_request(GPIO_FN_VIO0_D6, NULL); @@ -1099,10 +1183,10 @@ static void __init eva_init(void) gpio_request(GPIO_FN_VIO_CKO, NULL); /* CON1/CON15 Camera */ - gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ - gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ + gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ + gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ /* see mt9t111_power() */ - gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ + gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ /* FSI-WM8978 */ gpio_request(GPIO_FN_FSIAIBT, NULL); @@ -1111,8 +1195,8 @@ static void __init eva_init(void) gpio_request(GPIO_FN_FSIAOSLD, NULL); gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL); - gpio_request(GPIO_PORT7, NULL); - gpio_request(GPIO_PORT8, NULL); + gpio_request(7, NULL); + gpio_request(8, NULL); gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ @@ -1129,29 +1213,21 @@ static void __init eva_init(void) * DBGMD/LCDC0/FSIA MUX * DBGMD_SELECT_B should be set after setting PFC Function. */ - gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL); /* * We can switch CON8/CON14 by SW1.5, * but it needs after DBGMD_SELECT_B */ - gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL); - if (gpio_get_value(GPIO_PORT6)) { + gpio_request_one(6, GPIOF_IN, NULL); + if (gpio_get_value(6)) { /* CON14 enable */ } else { /* CON8 (SDHI1) enable */ - gpio_request(GPIO_FN_SDHI1_CLK, NULL); - gpio_request(GPIO_FN_SDHI1_CMD, NULL); - gpio_request(GPIO_FN_SDHI1_D0, NULL); - gpio_request(GPIO_FN_SDHI1_D1, NULL); - gpio_request(GPIO_FN_SDHI1_D2, NULL); - gpio_request(GPIO_FN_SDHI1_D3, NULL); - gpio_request(GPIO_FN_SDHI1_CD, NULL); - gpio_request(GPIO_FN_SDHI1_WP, NULL); - - /* SDSLOT2_PON */ - gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL); + pinctrl_register_mappings(eva_sdhi1_pinctrl_map, + ARRAY_SIZE(eva_sdhi1_pinctrl_map)); + platform_device_register(&vcc_sdhi1); platform_device_register(&sdhi1_device); } |