diff options
Diffstat (limited to 'arch/arm/mach-shmobile')
| -rw-r--r-- | arch/arm/mach-shmobile/board-ape6evm.c | 15 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-bockw.c | 159 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-kzm9d.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-kzm9g.c | 193 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-lager.c | 49 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-marzen.c | 3 |
6 files changed, 360 insertions, 61 deletions
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 55b8c9fef95..5eb0caa6a7d 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -26,6 +26,7 @@ #include <linux/platform_device.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/sh_clk.h> #include <linux/smsc911x.h> #include <mach/common.h> #include <mach/irqs.h> @@ -65,7 +66,21 @@ static const struct pinctrl_map ape6evm_pinctrl_map[] = { static void __init ape6evm_add_standard_devices(void) { + + struct clk *parent; + struct clk *mp; + r8a73a4_clock_init(); + + /* MP clock parent = extal2 */ + parent = clk_get(NULL, "extal2"); + mp = clk_get(NULL, "mp"); + BUG_ON(IS_ERR(parent) || IS_ERR(mp)); + + clk_set_parent(mp, parent); + clk_put(parent); + clk_put(mp); + pinctrl_register_mappings(ape6evm_pinctrl_map, ARRAY_SIZE(ape6evm_pinctrl_map)); r8a73a4_pinmux_init(); diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 7ed2401b899..d5554646916 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -18,14 +18,52 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/mtd/partitions.h> #include <linux/pinctrl/machine.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7778.h> #include <asm/mach/arch.h> +/* + * CN9(Upper side) SCIF/RCAN selection + * + * 1,4 3,6 + * SW40 SCIF RCAN + * SW41 SCIF RCAN + */ + +/* + * MMC (CN26) pin + * + * SW6 (D2) 3 pin + * SW7 (D5) ON + * SW8 (D3) 3 pin + * SW10 (D4) 1 pin + * SW12 (CLK) 1 pin + * SW13 (D6) 3 pin + * SW14 (CMD) ON + * SW15 (D6) 1 pin + * SW16 (D0) ON + * SW17 (D1) ON + * SW18 (D7) 3 pin + * SW19 (MMC) 1 pin + */ + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_data = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, @@ -38,36 +76,128 @@ static struct resource smsc911x_resources[] = { DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ }; +/* USB */ static struct rcar_phy_platform_data usb_phy_platform_data __initdata; +/* SDHI */ +static struct sh_mobile_sdhi_info sdhi0_info = { + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, +}; + +static struct sh_eth_plat_data ether_platform_data __initdata = { + .phy = 0x01, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .register_type = SH_ETH_REG_FAST_RCAR, + .phy_interface = PHY_INTERFACE_MODE_RMII, + /* + * Although the LINK signal is available on the board, it's connected to + * the link/activity LED output of the PHY, thus the link disappears and + * reappears after each packet. We'd be better off ignoring such signal + * and getting the link state from the PHY indirectly. + */ + .no_ether_link = 1, +}; + +/* I2C */ +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("rx8581", 0x51), + }, +}; + +/* HSPI*/ +static struct mtd_partition m25p80_spi_flash_partitions[] = { + { + .name = "data(spi)", + .size = 0x0100000, + .offset = 0, + }, +}; + +static struct flash_platform_data spi_flash_data = { + .name = "m25p80", + .type = "s25fl008k", + .parts = m25p80_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions), +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "m25p80", + .max_speed_hz = 104000000, + .chip_select = 0, + .bus_num = 0, + .mode = SPI_MODE_0, + .platform_data = &spi_flash_data, + }, +}; + +/* MMC */ +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, + .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, +}; + static const struct pinctrl_map bockw_pinctrl_map[] = { + /* Ether */ + PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778", + "ether_rmii", "ether"), + /* HSPI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778", + "hspi0_a", "hspi0"), + /* MMC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", + "mmc_data8", "mmc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", + "mmc_ctrl", "mmc"), /* SCIF0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", "scif0_data_a", "scif0"), PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", "scif0_ctrl", "scif0"), + /* USB */ PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", "usb0", "usb0"), PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", "usb1", "usb1"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0", "sdhi0"), }; +#define FPGA 0x18200000 #define IRQ0MR 0x30 +#define PFC 0xfffc0000 +#define PUPR4 0x110 static void __init bockw_init(void) { - void __iomem *fpga; + void __iomem *base; r8a7778_clock_init(); r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); r8a7778_add_usb_phy_device(&usb_phy_platform_data); + r8a7778_add_ether_device(ðer_platform_data); + r8a7778_add_i2c_device(0); + r8a7778_add_hspi_device(0); + r8a7778_add_mmc_device(&sh_mmcif_plat); + i2c_register_board_info(0, i2c0_devices, + ARRAY_SIZE(i2c0_devices)); + spi_register_board_info(spi_board_info, + ARRAY_SIZE(spi_board_info)); pinctrl_register_mappings(bockw_pinctrl_map, ARRAY_SIZE(bockw_pinctrl_map)); r8a7778_pinmux_init(); - fpga = ioremap_nocache(0x18200000, SZ_1M); - if (fpga) { + /* for SMSC */ + base = ioremap_nocache(FPGA, SZ_1M); + if (base) { /* * CAUTION * @@ -75,16 +205,33 @@ static void __init bockw_init(void) * it should be cared in the future * Now, it is assuming IRQ0 was used only from SMSC. */ - u16 val = ioread16(fpga + IRQ0MR); + u16 val = ioread16(base + IRQ0MR); val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - iounmap(fpga); + iowrite16(val, base + IRQ0MR); + iounmap(base); + + regulator_register_fixed(0, dummy_supplies, + ARRAY_SIZE(dummy_supplies)); platform_device_register_resndata( &platform_bus, "smsc911x", -1, smsc911x_resources, ARRAY_SIZE(smsc911x_resources), &smsc911x_data, sizeof(smsc911x_data)); } + + /* for SDHI */ + base = ioremap_nocache(PFC, 0x200); + if (base) { + /* + * FIXME + * + * SDHI CD/WP pin needs pull-up + */ + iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4); + iounmap(base); + + r8a7778_sdhi_init(0, &sdhi0_info); + } } static const char *bockw_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index c016ccd9243..4368000e112 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -56,7 +56,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device smsc91x_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 1fdf05cb6da..165483c9bee 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -29,6 +29,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mfd/as3711.h> #include <linux/mfd/tmio.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> @@ -606,6 +607,140 @@ static struct platform_device fsi_ak4648_device = { }; /* I2C */ + +/* StepDown1 is used to supply 1.315V to the CPU */ +static struct regulator_init_data as3711_sd1 = { + .constraints = { + .name = "1.315V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 1315000, + .max_uV = 1335000, + }, +}; + +/* StepDown2 is used to supply 1.8V to the CPU and to the board */ +static struct regulator_init_data as3711_sd2 = { + .constraints = { + .name = "1.8V", + .boot_on = 1, + .always_on = 1, + .min_uV = 1800000, + .max_uV = 1800000, + }, +}; + +/* + * StepDown3 is switched in parallel with StepDown2, seems to be off, + * according to read-back pre-set register values + */ + +/* StepDown4 is used to supply 1.215V to the CPU and to the board */ +static struct regulator_init_data as3711_sd4 = { + .constraints = { + .name = "1.215V", + .boot_on = 1, + .always_on = 1, + .min_uV = 1215000, + .max_uV = 1235000, + }, +}; + +/* LDO1 is unused and unconnected */ + +/* LDO2 is used to supply 2.8V to the CPU */ +static struct regulator_init_data as3711_ldo2 = { + .constraints = { + .name = "2.8V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 2800000, + .max_uV = 2800000, + }, +}; + +/* LDO3 is used to supply 3.0V to the CPU */ +static struct regulator_init_data as3711_ldo3 = { + .constraints = { + .name = "3.0V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 3000000, + .max_uV = 3000000, + }, +}; + +/* LDO4 is used to supply 2.8V to the board */ +static struct regulator_init_data as3711_ldo4 = { + .constraints = { + .name = "2.8V", + .boot_on = 1, + .always_on = 1, + .min_uV = 2800000, + .max_uV = 2800000, + }, +}; + +/* LDO5 is switched parallel to LDO4, also set to 2.8V */ +static struct regulator_init_data as3711_ldo5 = { + .constraints = { + .name = "2.8V #2", + .boot_on = 1, + .always_on = 1, + .min_uV = 2800000, + .max_uV = 2800000, + }, +}; + +/* LDO6 is unused and unconnected */ + +/* LDO7 is used to supply 1.15V to the CPU */ +static struct regulator_init_data as3711_ldo7 = { + .constraints = { + .name = "1.15V CPU", + .boot_on = 1, + .always_on = 1, + .min_uV = 1150000, + .max_uV = 1150000, + }, +}; + +/* LDO8 is switched parallel to LDO7, also set to 1.15V */ +static struct regulator_init_data as3711_ldo8 = { + .constraints = { + .name = "1.15V CPU #2", + .boot_on = 1, + .always_on = 1, + .min_uV = 1150000, + .max_uV = 1150000, + }, +}; + +static struct as3711_platform_data as3711_pdata = { + .regulator = { + .init_data = { + [AS3711_REGULATOR_SD_1] = &as3711_sd1, + [AS3711_REGULATOR_SD_2] = &as3711_sd2, + [AS3711_REGULATOR_SD_4] = &as3711_sd4, + [AS3711_REGULATOR_LDO_2] = &as3711_ldo2, + [AS3711_REGULATOR_LDO_3] = &as3711_ldo3, + [AS3711_REGULATOR_LDO_4] = &as3711_ldo4, + [AS3711_REGULATOR_LDO_5] = &as3711_ldo5, + [AS3711_REGULATOR_LDO_7] = &as3711_ldo7, + [AS3711_REGULATOR_LDO_8] = &as3711_ldo8, + }, + }, + .backlight = { + .su2_fb = "sh_mobile_lcdc_fb.0", + .su2_max_uA = 36000, + .su2_feedback = AS3711_SU2_CURR_AUTO, + .su2_fbprot = AS3711_SU2_GPIO4, + .su2_auto_curr1 = true, + .su2_auto_curr2 = true, + .su2_auto_curr3 = true, + }, +}; + static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, }; @@ -625,6 +760,11 @@ static struct i2c_board_info i2c0_devices[] = { I2C_BOARD_INFO("adxl34x", 0x1d), .irq = irq_pin(26), /* IRQ26 */ }, + { + I2C_BOARD_INFO("as3711", 0x40), + .irq = intcs_evt2irq(0x3300), /* IRQ24 */ + .platform_data = &as3711_pdata, + }, }; static struct i2c_board_info i2c1_devices[] = { @@ -715,59 +855,6 @@ static const struct pinctrl_map kzm_pinctrl_map[] = { "usb_vbus", "usb"), }; -/* - * FIXME - * - * This is quick hack for enabling LCDC backlight - */ -static int __init as3711_enable_lcdc_backlight(void) -{ - struct i2c_adapter *a = i2c_get_adapter(0); - struct i2c_msg msg; - int i, ret; - __u8 magic[] = { - 0x40, 0x2a, - 0x43, 0x3c, - 0x44, 0x3c, - 0x45, 0x3c, - 0x54, 0x03, - 0x51, 0x00, - 0x51, 0x01, - 0xff, 0x00, /* wait */ - 0x43, 0xf0, - 0x44, 0xf0, - 0x45, 0xf0, - }; - - if (!of_machine_is_compatible("renesas,kzm9g")) - return 0; - - if (!a) - return 0; - - msg.addr = 0x40; - msg.len = 2; - msg.flags = 0; - - for (i = 0; i < ARRAY_SIZE(magic); i += 2) { - msg.buf = magic + i; - - if (0xff == msg.buf[0]) { - udelay(500); - continue; - } - - ret = i2c_transfer(a, &msg, 1); - if (ret < 0) { - pr_err("i2c transfer fail\n"); - break; - } - } - - return 0; -} -device_initcall(as3711_enable_lcdc_backlight); - static void __init kzm_init(void) { regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers, diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 6114edd0a97..d73e21d3ea8 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -18,16 +18,59 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/interrupt.h> #include <linux/irqchip.h> #include <linux/kernel.h> +#include <linux/leds.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_device.h> #include <mach/common.h> #include <mach/r8a7790.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* LEDS */ +static struct gpio_led lager_leds[] = { + { + .name = "led8", + .gpio = RCAR_GP_PIN(5, 17), + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "led7", + .gpio = RCAR_GP_PIN(4, 23), + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "led6", + .gpio = RCAR_GP_PIN(4, 22), + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static __initdata struct gpio_led_platform_data lager_leds_pdata = { + .leds = lager_leds, + .num_leds = ARRAY_SIZE(lager_leds), +}; + +/* GPIO KEY */ +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1 } + +static __initdata struct gpio_keys_button gpio_buttons[] = { + GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), + GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), + GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), + GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"), +}; + +static __initdata struct gpio_keys_platform_data lager_keys_pdata = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + static const struct pinctrl_map lager_pinctrl_map[] = { /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", @@ -46,6 +89,12 @@ static void __init lager_add_standard_devices(void) r8a7790_pinmux_init(); r8a7790_add_standard_devices(); + platform_device_register_data(&platform_bus, "leds-gpio", -1, + &lager_leds_pdata, + sizeof(lager_leds_pdata)); + platform_device_register_data(&platform_bus, "gpio-keys", -1, + &lager_keys_pdata, + sizeof(lager_keys_pdata)); } static const char *lager_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index b1b41b199f9..a7d1010505b 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_iid(0x3c), /* IRQ 1 */ + .start = irq_pin(1), /* IRQ 1 */ .flags = IORESOURCE_IRQ, }, }; @@ -231,6 +231,7 @@ static void __init marzen_init(void) pinctrl_register_mappings(marzen_pinctrl_map, ARRAY_SIZE(marzen_pinctrl_map)); r8a7779_pinmux_init(); + r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */ r8a7779_add_standard_devices(); r8a7779_add_usb_phy_device(&usb_phy_platform_data); |