diff options
Diffstat (limited to 'arch/arm/mach-spear3xx/spear300.c')
| -rw-r--r-- | arch/arm/mach-spear3xx/spear300.c | 653 |
1 files changed, 268 insertions, 385 deletions
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f7db66812ab..f74a05bdb82 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -3,372 +3,62 @@ * * SPEAr300 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/types.h> -#include <linux/amba/pl061.h> -#include <linux/ptrace.h> -#include <asm/irq.h> +#define pr_fmt(fmt) "SPEAr300: " fmt + +#include <linux/amba/pl08x.h> +#include <linux/of_platform.h> +#include <asm/hardware/vic.h> +#include <asm/mach/arch.h> #include <plat/shirq.h> #include <mach/generic.h> -#include <mach/hardware.h> - -/* pad multiplexing support */ -/* muxing registers */ -#define PAD_MUX_CONFIG_REG 0x00 -#define MODE_CONFIG_REG 0x04 - -/* modes */ -#define NAND_MODE (1 << 0) -#define NOR_MODE (1 << 1) -#define PHOTO_FRAME_MODE (1 << 2) -#define LEND_IP_PHONE_MODE (1 << 3) -#define HEND_IP_PHONE_MODE (1 << 4) -#define LEND_WIFI_PHONE_MODE (1 << 5) -#define HEND_WIFI_PHONE_MODE (1 << 6) -#define ATA_PABX_WI2S_MODE (1 << 7) -#define ATA_PABX_I2S_MODE (1 << 8) -#define CAML_LCDW_MODE (1 << 9) -#define CAMU_LCD_MODE (1 << 10) -#define CAMU_WLCD_MODE (1 << 11) -#define CAML_LCD_MODE (1 << 12) -#define ALL_MODES 0x1FFF - -struct pmx_mode spear300_nand_mode = { - .id = NAND_MODE, - .name = "nand mode", - .mask = 0x00, -}; - -struct pmx_mode spear300_nor_mode = { - .id = NOR_MODE, - .name = "nor mode", - .mask = 0x01, -}; - -struct pmx_mode spear300_photo_frame_mode = { - .id = PHOTO_FRAME_MODE, - .name = "photo frame mode", - .mask = 0x02, -}; - -struct pmx_mode spear300_lend_ip_phone_mode = { - .id = LEND_IP_PHONE_MODE, - .name = "lend ip phone mode", - .mask = 0x03, -}; - -struct pmx_mode spear300_hend_ip_phone_mode = { - .id = HEND_IP_PHONE_MODE, - .name = "hend ip phone mode", - .mask = 0x04, -}; - -struct pmx_mode spear300_lend_wifi_phone_mode = { - .id = LEND_WIFI_PHONE_MODE, - .name = "lend wifi phone mode", - .mask = 0x05, -}; - -struct pmx_mode spear300_hend_wifi_phone_mode = { - .id = HEND_WIFI_PHONE_MODE, - .name = "hend wifi phone mode", - .mask = 0x06, -}; - -struct pmx_mode spear300_ata_pabx_wi2s_mode = { - .id = ATA_PABX_WI2S_MODE, - .name = "ata pabx wi2s mode", - .mask = 0x07, -}; - -struct pmx_mode spear300_ata_pabx_i2s_mode = { - .id = ATA_PABX_I2S_MODE, - .name = "ata pabx i2s mode", - .mask = 0x08, -}; - -struct pmx_mode spear300_caml_lcdw_mode = { - .id = CAML_LCDW_MODE, - .name = "caml lcdw mode", - .mask = 0x0C, -}; - -struct pmx_mode spear300_camu_lcd_mode = { - .id = CAMU_LCD_MODE, - .name = "camu lcd mode", - .mask = 0x0D, -}; - -struct pmx_mode spear300_camu_wlcd_mode = { - .id = CAMU_WLCD_MODE, - .name = "camu wlcd mode", - .mask = 0x0E, -}; - -struct pmx_mode spear300_caml_lcd_mode = { - .id = CAML_LCD_MODE, - .name = "caml lcd mode", - .mask = 0x0F, -}; - -/* devices */ -static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { - { - .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | - ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear300_pmx_fsmc_2_chips = { - .name = "fsmc_2_chips", - .modes = pmx_fsmc_2_chips_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { - { - .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | - ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, - .mask = PMX_FIRDA_MASK | PMX_UART0_MASK, - }, -}; - -struct pmx_dev spear300_pmx_fsmc_4_chips = { - .name = "fsmc_4_chips", - .modes = pmx_fsmc_4_chips_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_keyboard_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | - LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | - CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE | - CAML_LCD_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear300_pmx_keyboard = { - .name = "keyboard", - .modes = pmx_keyboard_modes, - .mode_count = ARRAY_SIZE(pmx_keyboard_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_clcd_modes[] = { - { - .ids = PHOTO_FRAME_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK , - }, { - .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE | - CAMU_LCD_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_clcd = { - .name = "clcd", - .modes = pmx_clcd_modes, - .mode_count = ARRAY_SIZE(pmx_clcd_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_gpio_modes[] = { - { - .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE, - .mask = PMX_MII_MASK, - }, { - .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, { - .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK, - }, { - .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK, - }, { - .ids = ATA_PABX_WI2S_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK - | PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_gpio = { - .name = "telecom_gpio", - .modes = pmx_telecom_gpio_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_tdm_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE - | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE - | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_tdm = { - .name = "telecom_tdm", - .modes = pmx_telecom_tdm_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | - LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE - | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE | - CAML_LCDW_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = { - .name = "telecom_spi_cs_i2c_clk", - .modes = pmx_telecom_spi_cs_i2c_clk_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_camera_modes[] = { - { - .ids = CAML_LCDW_MODE | CAML_LCD_MODE, - .mask = PMX_MII_MASK, - }, { - .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_camera = { - .name = "telecom_camera", - .modes = pmx_telecom_camera_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_dac_modes[] = { - { - .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_dac = { - .name = "telecom_dac", - .modes = pmx_telecom_dac_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_i2s_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE - | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | - ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_i2s = { - .name = "telecom_i2s", - .modes = pmx_telecom_i2s_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { - { - .ids = NAND_MODE | NOR_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | - PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_boot_pins = { - .name = "telecom_boot_pins", - .modes = pmx_telecom_boot_pins_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | - HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | - CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE | - ATA_PABX_I2S_MODE, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | - PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_sdhci_4bit = { - .name = "telecom_sdhci_4bit", - .modes = pmx_telecom_sdhci_4bit_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | - HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | - CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | - PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_sdhci_8bit = { - .name = "telecom_sdhci_8bit", - .modes = pmx_telecom_sdhci_8bit_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_gpio1_modes[] = { - { - .ids = PHOTO_FRAME_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | - PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_gpio1 = { - .name = "arm gpio1", - .modes = pmx_gpio1_modes, - .mode_count = ARRAY_SIZE(pmx_gpio1_modes), - .enb_on_reset = 1, -}; - -/* pmx driver structure */ -static struct pmx_driver pmx_driver = { - .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f}, - .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, -}; +#include <mach/spear.h> + +/* Base address of various IPs */ +#define SPEAR300_TELECOM_BASE UL(0x50000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR300_INT_ENB_MASK_REG 0x54 +#define SPEAR300_INT_STS_MASK_REG 0x58 +#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) +#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) +#define SPEAR300_I2S_IRQ_MASK (1 << 2) +#define SPEAR300_TDM_IRQ_MASK (1 << 3) +#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) +#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) +#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) +#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) +#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) + +#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF + +#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) + + +/* SPEAr300 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) +#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) +#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) +#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) +#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) +#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) +#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) +#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) +#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM /* spear3xx shared irq */ static struct shirq_dev_config shirq_ras1_config[] = { @@ -423,45 +113,238 @@ static struct spear_shirq shirq_ras1 = { }, }; -/* Add spear300 specific devices here */ -/* arm gpio1 device registration */ -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, - .irq_base = SPEAR300_GPIO1_INT_BASE, +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear300_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, }; -AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, - {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); +/* Add SPEAr300 auxdata to pass platform data */ +static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + {} +}; -/* spear300 routines */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +static void __init spear300_dt_init(void) { - int ret = 0; + int ret; + + pl080_plat_data.slave_channels = spear300_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear300_auxdata_lookup, NULL); /* shared irq registration */ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K); if (shirq_ras1.regs.base) { ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ\n"); + pr_err("Error registering Shared IRQ\n"); } +} - /* pmx initialization */ - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; +static const char * const spear300_dt_board_compat[] = { + "st,spear300", + "st,spear300-evb", + NULL, +}; - pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); - if (pmx_driver.base) { - ret = pmx_register(&pmx_driver); - if (ret) - printk(KERN_ERR "padmux: registration failed. err no" - ": %d\n", ret); - /* Free Mapping, device selection already done */ - iounmap(pmx_driver.base); - } +static void __init spear300_map_io(void) +{ + spear3xx_map_io(); } + +DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree") + .map_io = spear300_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear300_dt_init, + .restart = spear_restart, + .dt_compat = spear300_dt_board_compat, +MACHINE_END |