1 files changed, 157 insertions, 0 deletions
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
new file mode 100644
index 00000000000..baf6bcc3169
--- /dev/null
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -0,0 +1,157 @@
+/*
+ * arch/arm/mach-spear6xx/spear6xx.c
+ *
+ * SPEAr6XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <linux/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <mach/irqs.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear6xx machines common devices here */
+/* uart device registeration */
+struct amba_device uart_device[] = {
+	{
+		.dev = {
+			.init_name = "uart0",
+		},
+		.res = {
+			.start = SPEAR6XX_ICM1_UART0_BASE,
+			.end = SPEAR6XX_ICM1_UART0_BASE +
+				SPEAR6XX_ICM1_UART0_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_UART_0, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "uart1",
+		},
+		.res = {
+			.start = SPEAR6XX_ICM1_UART1_BASE,
+			.end = SPEAR6XX_ICM1_UART1_BASE +
+				SPEAR6XX_ICM1_UART1_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_UART_1, NO_IRQ},
+	}
+};
+
+/* gpio device registeration */
+static struct pl061_platform_data gpio_plat_data[] = {
+	{
+		.gpio_base	= 0,
+		.irq_base	= SPEAR_GPIO0_INT_BASE,
+	}, {
+		.gpio_base	= 8,
+		.irq_base	= SPEAR_GPIO1_INT_BASE,
+	}, {
+		.gpio_base	= 16,
+		.irq_base	= SPEAR_GPIO2_INT_BASE,
+	},
+};
+
+struct amba_device gpio_device[] = {
+	{
+		.dev = {
+			.init_name = "gpio0",
+			.platform_data = &gpio_plat_data[0],
+		},
+		.res = {
+			.start = SPEAR6XX_CPU_GPIO_BASE,
+			.end = SPEAR6XX_CPU_GPIO_BASE +
+				SPEAR6XX_CPU_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "gpio1",
+			.platform_data = &gpio_plat_data[1],
+		},
+		.res = {
+			.start = SPEAR6XX_ICM3_GPIO_BASE,
+			.end = SPEAR6XX_ICM3_GPIO_BASE +
+				SPEAR6XX_ICM3_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "gpio2",
+			.platform_data = &gpio_plat_data[2],
+		},
+		.res = {
+			.start = SPEAR6XX_ICM2_GPIO_BASE,
+			.end = SPEAR6XX_ICM2_GPIO_BASE +
+				SPEAR6XX_ICM2_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_APPL_GPIO, NO_IRQ},
+	}
+};
+
+/* This will add devices, and do machine specific tasks */
+void __init spear6xx_init(void)
+{
+	/* nothing to do for now */
+}
+
+/* This will initialize vic */
+void __init spear6xx_init_irq(void)
+{
+	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
+	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
+}
+
+/* Following will create static virtual/physical mappings */
+static struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
+		.length		= SPEAR6XX_ICM1_UART0_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
+		.length		= SPEAR6XX_CPU_VIC_PRI_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
+		.length		= SPEAR6XX_CPU_VIC_SEC_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
+		.length		= SPEAR6XX_ICM3_MISC_REG_BASE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
+		.length		= SPEAR6XX_ICM3_MISC_REG_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear6xx_map_io(void)
+{
+	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
+
+	/* This will initialize clock framework */
+	clk_init();
+}