diff options
Diffstat (limited to 'arch/arm/mach-stmp378x/include/mach/regs-ssp.h')
| -rw-r--r-- | arch/arm/mach-stmp378x/include/mach/regs-ssp.h | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h new file mode 100644 index 00000000000..28aacf0f58e --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h @@ -0,0 +1,102 @@ +/* + * stmp378x: SSP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000) +#define REGS_SSP1_PHYS 0x80010000 +#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000) +#define REGS_SSP2_PHYS 0x80034000 +#define REGS_SSP_SIZE 0x2000 + +#define HW_SSP_CTRL0 0x0 +#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_SSP_CTRL0_XFER_COUNT 0 +#define BM_SSP_CTRL0_ENABLE 0x00010000 +#define BM_SSP_CTRL0_GET_RESP 0x00020000 +#define BM_SSP_CTRL0_LONG_RESP 0x00080000 +#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000 +#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000 +#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000 +#define BP_SSP_CTRL0_BUS_WIDTH 22 +#define BM_SSP_CTRL0_DATA_XFER 0x01000000 +#define BM_SSP_CTRL0_READ 0x02000000 +#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000 +#define BM_SSP_CTRL0_LOCK_CS 0x08000000 +#define BM_SSP_CTRL0_RUN 0x20000000 +#define BM_SSP_CTRL0_CLKGATE 0x40000000 +#define BM_SSP_CTRL0_SFTRST 0x80000000 + +#define HW_SSP_CMD0 0x10 +#define BM_SSP_CMD0_CMD 0x000000FF +#define BP_SSP_CMD0_CMD 0 +#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00 +#define BP_SSP_CMD0_BLOCK_COUNT 8 +#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000 +#define BP_SSP_CMD0_BLOCK_SIZE 16 +#define BM_SSP_CMD0_APPEND_8CYC 0x00100000 +#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF +#define BP_SSP_CMD1_CMD_ARG 0 + +#define HW_SSP_TIMING 0x50 +#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF +#define BP_SSP_TIMING_CLOCK_RATE 0 +#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00 +#define BP_SSP_TIMING_CLOCK_DIVIDE 8 +#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000 +#define BP_SSP_TIMING_TIMEOUT 16 + +#define HW_SSP_CTRL1 0x60 +#define BM_SSP_CTRL1_SSP_MODE 0x0000000F +#define BP_SSP_CTRL1_SSP_MODE 0 +#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0 +#define BP_SSP_CTRL1_WORD_LENGTH 4 +#define BM_SSP_CTRL1_POLARITY 0x00000200 +#define BM_SSP_CTRL1_PHASE 0x00000400 +#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000 +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000 +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000 +#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000 + +#define HW_SSP_DATA 0x70 + +#define HW_SSP_SDRESP0 0x80 + +#define HW_SSP_SDRESP1 0x90 + +#define HW_SSP_SDRESP2 0xA0 + +#define HW_SSP_SDRESP3 0xB0 + +#define HW_SSP_STATUS 0xC0 +#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020 +#define BM_SSP_STATUS_TIMEOUT 0x00001000 +#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000 +#define BM_SSP_STATUS_RESP_ERR 0x00008000 +#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000 +#define BM_SSP_STATUS_CARD_DETECT 0x10000000 |