1 files changed, 109 insertions, 11 deletions

diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 4e8323770c7..5a440f315e5 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -2,10 +2,14 @@
  * arch/arm/mach-tegra/include/mach/uncompress.h
  *
  * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
  *
  * Author:
  *	Colin Cross <ccross@google.com>
  *	Erik Gilling <konkers@google.com>
+ *	Doug Anderson <dianders@chromium.org>
+ *	Stephen Warren <swarren@nvidia.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -25,36 +29,130 @@
 #include <linux/serial_reg.h>
 
 #include <mach/iomap.h>
+#include <mach/irammap.h>
+
+#define BIT(x) (1 << (x))
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+
+#define DEBUG_UART_SHIFT 2
+
+volatile u8 *uart;
 
 static void putc(int c)
 {
-	volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
-	int shift = 2;
-
 	if (uart == NULL)
 		return;
 
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+	while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE))
 		barrier();
-	uart[UART_TX << shift] = c;
+	uart[UART_TX << DEBUG_UART_SHIFT] = c;
 }
 
 static inline void flush(void)
 {
 }
 
+static inline void save_uart_address(void)
+{
+	u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
+
+	if (uart) {
+		buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
+		buf[1] = (u32)uart;
+	} else
+		buf[0] = 0;
+}
+
+/*
+ * Setup before decompression.  This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
 static inline void arch_decomp_setup(void)
 {
-	volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
-	int shift = 2;
+	static const struct {
+		u32 base;
+		u32 reset_reg;
+		u32 clock_reg;
+		u32 bit;
+	} uarts[] = {
+		{
+			TEGRA_UARTA_BASE,
+			TEGRA_CLK_RESET_BASE + 0x04,
+			TEGRA_CLK_RESET_BASE + 0x10,
+			6,
+		},
+		{
+			TEGRA_UARTB_BASE,
+			TEGRA_CLK_RESET_BASE + 0x04,
+			TEGRA_CLK_RESET_BASE + 0x10,
+			7,
+		},
+		{
+			TEGRA_UARTC_BASE,
+			TEGRA_CLK_RESET_BASE + 0x08,
+			TEGRA_CLK_RESET_BASE + 0x14,
+			23,
+		},
+		{
+			TEGRA_UARTD_BASE,
+			TEGRA_CLK_RESET_BASE + 0x0c,
+			TEGRA_CLK_RESET_BASE + 0x18,
+			1,
+		},
+		{
+			TEGRA_UARTE_BASE,
+			TEGRA_CLK_RESET_BASE + 0x0c,
+			TEGRA_CLK_RESET_BASE + 0x18,
+			2,
+		},
+	};
+	int i;
+	volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+	u32 chip, div;
+
+	/*
+	 * Look for the first UART that:
+	 * a) Is not in reset.
+	 * b) Is clocked.
+	 * c) Has a 'D' in the scratchpad register.
+	 *
+	 * Note that on Tegra30, the first two conditions are required, since
+	 * if not true, accesses to the UART scratch register will hang.
+	 * Tegra20 doesn't have this issue.
+	 *
+	 * The intent is that the bootloader will tell the kernel which UART
+	 * to use by setting up those conditions. If nothing found, we'll fall
+	 * back to what's specified in TEGRA_DEBUG_UART_BASE.
+	 */
+	for (i = 0; i < ARRAY_SIZE(uarts); i++) {
+		if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+			continue;
 
+		if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+			continue;
+
+		uart = (volatile u8 *)uarts[i].base;
+		if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
+			continue;
+
+		break;
+	}
+	if (i == ARRAY_SIZE(uarts))
+		uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+	save_uart_address();
 	if (uart == NULL)
 		return;
 
-	uart[UART_LCR << shift] |= UART_LCR_DLAB;
-	uart[UART_DLL << shift] = 0x75;
-	uart[UART_DLM << shift] = 0x0;
-	uart[UART_LCR << shift] = 3;
+	chip = (apb_misc[0x804 / 4] >> 8) & 0xff;
+	if (chip == 0x20)
+		div = 0x0075;
+	else
+		div = 0x00dd;
+
+	uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB;
+	uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff;
+	uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8;
+	uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
 }
 
 static inline void arch_decomp_wdog(void)