diff options
Diffstat (limited to 'arch/arm/mach-u300/clock.c')
| -rw-r--r-- | arch/arm/mach-u300/clock.c | 121 |
1 files changed, 80 insertions, 41 deletions
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5cd04d6751b..111f7ea32b3 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/timer.h> #include <linux/io.h> +#include <linux/seq_file.h> #include <asm/clkdev.h> #include <mach/hardware.h> @@ -702,6 +703,7 @@ static struct clk amba_clk = { .rate = 52000000, /* this varies! */ .hw_ctrld = true, .reset = false, + .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), }; /* @@ -720,6 +722,7 @@ static struct clk cpu_clk = { .set_rate = clk_set_rate_cpuclk, .get_rate = clk_get_rate_cpuclk, .round_rate = clk_round_rate_cpuclk, + .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), }; static struct clk nandif_clk = { @@ -732,6 +735,7 @@ static struct clk nandif_clk = { .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), }; static struct clk semi_clk = { @@ -744,6 +748,7 @@ static struct clk semi_clk = { .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -758,6 +763,7 @@ static struct clk isp_clk = { .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), }; static struct clk cds_clk = { @@ -771,6 +777,7 @@ static struct clk cds_clk = { .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), }; #endif @@ -785,6 +792,7 @@ static struct clk dma_clk = { .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), }; static struct clk aaif_clk = { @@ -798,6 +806,7 @@ static struct clk aaif_clk = { .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), }; static struct clk apex_clk = { @@ -811,6 +820,7 @@ static struct clk apex_clk = { .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), }; static struct clk video_enc_clk = { @@ -825,6 +835,7 @@ static struct clk video_enc_clk = { .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), }; static struct clk xgam_clk = { @@ -839,6 +850,7 @@ static struct clk xgam_clk = { .get_rate = clk_get_rate_xgamclk, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), }; /* This clock is used to activate the video encoder */ @@ -854,6 +866,7 @@ static struct clk ahb_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), }; @@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), }; static struct clk intcon_clk = { @@ -882,6 +896,8 @@ static struct clk intcon_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, /* INTCON can be reset but not clock-gated */ + .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), + }; static struct clk mspro_clk = { @@ -895,6 +911,7 @@ static struct clk mspro_clk = { .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), }; static struct clk emif_clk = { @@ -909,6 +926,7 @@ static struct clk emif_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_emif_clk, + .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), }; @@ -926,6 +944,7 @@ static struct clk fast_clk = { .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), }; static struct clk mmcsd_clk = { @@ -942,6 +961,7 @@ static struct clk mmcsd_clk = { .round_rate = clk_round_rate_mclk, .disable = syscon_clk_disable, .enable = syscon_clk_enable, + .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), }; static struct clk i2s0_clk = { @@ -956,6 +976,7 @@ static struct clk i2s0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), }; static struct clk i2s1_clk = { @@ -970,6 +991,7 @@ static struct clk i2s1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), }; static struct clk i2c0_clk = { @@ -984,6 +1006,7 @@ static struct clk i2c0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), }; static struct clk i2c1_clk = { @@ -998,6 +1021,7 @@ static struct clk i2c1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), }; static struct clk spi_clk = { @@ -1012,6 +1036,7 @@ static struct clk spi_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1026,6 +1051,7 @@ static struct clk uart1_clk = { .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), }; #endif @@ -1044,6 +1070,7 @@ static struct clk slow_clk = { .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), }; /* TODO: implement SYSCON clock? */ @@ -1055,6 +1082,7 @@ static struct clk wdog_clk = { .rate = 32768, .reset = false, /* This is always on, cannot be enabled/disabled or reset */ + .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), }; /* This one is hardwired to PLL13 */ @@ -1069,6 +1097,7 @@ static struct clk uart_clk = { .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock), }; static struct clk keypad_clk = { @@ -1082,6 +1111,7 @@ static struct clk keypad_clk = { .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), }; static struct clk gpio_clk = { @@ -1095,6 +1125,7 @@ static struct clk gpio_clk = { .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), }; static struct clk rtc_clk = { @@ -1106,6 +1137,7 @@ static struct clk rtc_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, /* This clock is always on, cannot be enabled/disabled */ + .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), }; static struct clk bustr_clk = { @@ -1119,6 +1151,7 @@ static struct clk bustr_clk = { .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), }; static struct clk evhist_clk = { @@ -1132,6 +1165,7 @@ static struct clk evhist_clk = { .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), }; static struct clk timer_clk = { @@ -1145,6 +1179,7 @@ static struct clk timer_clk = { .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), }; static struct clk app_timer_clk = { @@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = { .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1172,6 +1208,7 @@ static struct clk ppm_clk = { .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), }; #endif @@ -1187,53 +1224,53 @@ static struct clk ppm_clk = { */ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("nandif", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), #endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("aaif", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("msl", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), /* AHB bridge clocks */ - DEF_LOOKUP("ahb", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), + DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), /* * The .0 and .1 identifiers on these comes from the platform device * .id field and are assigned when the platform devices are registered. */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stddci2c.0", &i2c0_clk), - DEF_LOOKUP("stddci2c.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stu300.0", &i2c0_clk), + DEF_LOOKUP("stu300.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), + DEF_LOOKUP("uart1", &uart1_clk), #endif /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart_clk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("coh901327_wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("coh901461-keypad", &keypad_clk), DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc0", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), + DEF_LOOKUP("rtc-coh901331", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), + DEF_LOOKUP("ppm", &ppm_clk), #endif }; @@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = { .release = single_release, }; -static void init_clk_read_procfs(void) +static int __init init_clk_read_debugfs(void) { /* Expose a simple debugfs interface to view all clocks */ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, &u300_clocks_operations); -} -#else -static inline void init_clk_read_procfs(void) -{ + NULL, NULL, + &u300_clocks_operations); + return 0; } +/* + * This needs to come in after the core_initcall() for the + * overall clocks, because debugfs is not available until + * the subsystems come up. + */ +module_init(init_clk_read_debugfs); #endif static int __init u300_clock_init(void) @@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void) clk_register(); - init_clk_read_procfs(); - /* * Some of these may be on when we boot the system so make sure they * are turned OFF. |