1 files changed, 187 insertions, 0 deletions
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
new file mode 100644
index 00000000000..88333dfb19f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -0,0 +1,187 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/u300-regs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic register address definitions in physical memory and
+ * some block defintions for core devices like the timer.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_REGS_H
+#define __MACH_U300_REGS_H
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE		0x80000000
+#define U300_NAND_CS0_VIRT_BASE		0xff040000
+
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE		0x9f800000
+#define U300_NAND_IF_VIRT_BASE		0xff030000
+
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE		0xa0000000
+#define U300_AHB_PER_VIRT_BASE		0xff010000
+
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE		0xc0000000
+#define U300_FAST_PER_VIRT_BASE		0xff020000
+
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE		0xc0010000
+#define U300_SLOW_PER_VIRT_BASE		0xff000000
+
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE		0xffff0000
+#define U300_BOOTROM_VIRT_BASE		0xffff0000
+
+/* SEMI config base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SEMI_CONFIG_BASE		0x2FFE0000
+#else
+#define U300_SEMI_CONFIG_BASE		0x30000000
+#endif
+
+/*
+ * All the following peripherals are specified at their PHYSICAL address,
+ * so if you need to access them (in the kernel), you MUST use the macros
+ * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
+ * etc.
+ */
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
+
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE		(U300_AHB_PER_VIRT_BASE+0x1000)
+
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE		(U300_AHB_PER_VIRT_BASE+0x2000)
+
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
+
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
+
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
+
+/* MMC/SD controller */
+#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
+
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
+
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
+
+/* I2C0 controller */
+#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
+
+/* I2C1 controller */
+#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
+
+/* SPI controller */
+#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
+
+#ifdef CONFIG_MACH_U300_BS335
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+#endif
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
+
+/* SYSCON */
+#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE		(U300_SLOW_PER_VIRT_BASE+0x1000)
+
+/* Watchdog */
+#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
+
+/* UART0 */
+#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
+
+/* APP side special timer */
+#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		(U300_SLOW_PER_VIRT_BASE+0x4000)
+
+/* Keypad */
+#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
+
+/* GPIO */
+#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
+
+/* RTC */
+#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+
+/* Bus tracer */
+#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
+
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
+
+/* Genric Timer */
+#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
+
+/* PPM */
+#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
+
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) is only available in U335 */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_ISP_BASE			(0xA0008000)
+#endif
+
+/* DMA Controller base */
+#define U300_DMAC_BASE			(0xC0020000)
+
+/* MSL Base */
+#define U300_MSL_BASE			(0xc0022000)
+
+/* APEX Base */
+#define U300_APEX_BASE			(0xc0030000)
+
+/* Video Encoder Base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_VIDEOENC_BASE		(0xc0080000)
+#else
+#define U300_VIDEOENC_BASE		(0xc0040000)
+#endif
+
+/* XGAM Base */
+#define U300_XGAM_BASE			(0xd0000000)
+
+/*
+ * Virtual accessor macros for static devices
+ */
+
+
+#endif