summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-u300
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-u300')
-rw-r--r--arch/arm/mach-u300/Kconfig32
-rw-r--r--arch/arm/mach-u300/Makefile2
-rw-r--r--arch/arm/mach-u300/core.c759
-rw-r--r--arch/arm/mach-u300/dummyspichip.c20
-rw-r--r--arch/arm/mach-u300/i2c.c285
-rw-r--r--arch/arm/mach-u300/i2c.h23
-rw-r--r--arch/arm/mach-u300/include/mach/debug-macro.S21
-rw-r--r--arch/arm/mach-u300/include/mach/hardware.h5
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h80
-rw-r--r--arch/arm/mach-u300/include/mach/syscon.h592
-rw-r--r--arch/arm/mach-u300/include/mach/timex.h17
-rw-r--r--arch/arm/mach-u300/include/mach/u300-regs.h165
-rw-r--r--arch/arm/mach-u300/include/mach/uncompress.h45
-rw-r--r--arch/arm/mach-u300/regulator.c67
-rw-r--r--arch/arm/mach-u300/spi.c102
-rw-r--r--arch/arm/mach-u300/spi.h26
-rw-r--r--arch/arm/mach-u300/timer.c113
-rw-r--r--arch/arm/mach-u300/timer.h1
-rw-r--r--arch/arm/mach-u300/u300-gpio.h70
19 files changed, 396 insertions, 2029 deletions
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 1f597647d43..a85adcd0088 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,24 +1,46 @@
-if ARCH_U300
-
menu "ST-Ericsson AB U300/U335 Platform"
comment "ST-Ericsson Mobile Platform Products"
-config MACH_U300
- bool "U300"
+config ARCH_U300
+ bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
+ depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ select HAVE_TCM
select PINCTRL
select PINCTRL_COH901
select PINCTRL_U300
+ select SPARSE_IRQ
+ select MFD_SYSCON
+ select USE_OF
+ help
+ Support for ST-Ericsson U300 series mobile platforms.
comment "ST-Ericsson U300/U335 Feature Selections"
+config MACH_U300
+ depends on ARCH_U300
+ bool "U300"
+ default y
+
config U300_DEBUG
+ depends on ARCH_U300
bool "Debug support for U300"
depends on PM
help
Debug support for U300 in sysfs, procfs etc.
config MACH_U300_SPIDUMMY
+ depends on ARCH_U300
bool "SSP/SPI dummy chip"
select SPI
select SPI_MASTER
@@ -31,5 +53,3 @@ config MACH_U300_SPIDUMMY
SPI framework and ARM PL022 support.
endmenu
-
-endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 5a86c58da39..0f362b64fb8 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -7,7 +7,5 @@ obj-m :=
obj-n :=
obj- :=
-obj-$(CONFIG_SPI_PL022) += spi.o
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
-obj-$(CONFIG_I2C_STU300) += i2c.o
obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index a683d17b2ce..4f7ac2a1145 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -9,46 +9,157 @@
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/termios.h>
-#include <linux/dmaengine.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/serial.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/fsmc.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-u300.h>
-#include <linux/platform_data/pinctrl-coh901.h>
-#include <linux/platform_data/dma-coh901318.h>
-#include <linux/irqchip/arm-vic.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clocksource.h>
+#include <linux/clk.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-#include <mach/irqs.h>
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE 0x80000000
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE 0x9f800000
+/* ALE, CLE offset for FSMC NAND */
+#define PLAT_NAND_CLE (1 << 16)
+#define PLAT_NAND_ALE (1 << 17)
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE 0xa0000000
+#define U300_AHB_PER_VIRT_BASE 0xff010000
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE 0xc0000000
+#define U300_FAST_PER_VIRT_BASE 0xff020000
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE 0xc0010000
+#define U300_SLOW_PER_VIRT_BASE 0xff000000
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE 0xffff0000
+#define U300_BOOTROM_VIRT_BASE 0xffff0000
+/* SEMI config base */
+#define U300_SEMI_CONFIG_BASE 0x2FFE0000
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
+/* MMC/SD controller */
+#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
+/* I2C0 controller */
+#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
+/* I2C1 controller */
+#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
+/* SPI controller */
+#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000)
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
+/* SYSCON */
+#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
+/* Watchdog */
+#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
+/* UART0 */
+#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
+/* APP side special timer */
+#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
+/* Keypad */
+#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
+/* GPIO */
+#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
+/* RTC */
+#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
+/* Bus tracer */
+#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
+/* Genric Timer */
+#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
+/* PPM */
+#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) */
+#define U300_ISP_BASE (0xA0008000)
+/* DMA Controller base */
+#define U300_DMAC_BASE (0xC0020000)
+/* MSL Base */
+#define U300_MSL_BASE (0xc0022000)
+/* APEX Base */
+#define U300_APEX_BASE (0xc0030000)
+/* Video Encoder Base */
+#define U300_VIDEOENC_BASE (0xc0080000)
+/* XGAM Base */
+#define U300_XGAM_BASE (0xd0000000)
+
+/*
+ * SYSCON addresses applicable to the core machine.
+ */
-#include "timer.h"
-#include "spi.h"
-#include "i2c.h"
-#include "u300-gpio.h"
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR (0x400)
+/* SMCR */
+#define U300_SYSCON_SMCR (0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR (0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR (0x4f8)
+#define U300_SYSCON_PCR_SERV_IND (0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR (0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
+
+static void __iomem *syscon_base;
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
@@ -82,365 +193,6 @@ static void __init u300_map_io(void)
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
}
-/*
- * Declaration of devices found on the U300 board and
- * their respective memory locations.
- */
-
-static struct amba_pl011_data uart0_plat_data = {
-#ifdef CONFIG_COH901318
- .dma_filter = coh901318_filter_id,
- .dma_rx_param = (void *) U300_DMA_UART0_RX,
- .dma_tx_param = (void *) U300_DMA_UART0_TX,
-#endif
-};
-
-/* Slow device at 0x3000 offset */
-static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
- { IRQ_U300_UART0 }, &uart0_plat_data);
-
-/* The U335 have an additional UART1 on the APP CPU */
-static struct amba_pl011_data uart1_plat_data = {
-#ifdef CONFIG_COH901318
- .dma_filter = coh901318_filter_id,
- .dma_rx_param = (void *) U300_DMA_UART1_RX,
- .dma_tx_param = (void *) U300_DMA_UART1_TX,
-#endif
-};
-
-/* Fast device at 0x7000 offset */
-static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
- { IRQ_U300_UART1 }, &uart1_plat_data);
-
-/* AHB device at 0x4000 offset */
-static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
-
-/* Fast device at 0x6000 offset */
-static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
- { IRQ_U300_SPI }, NULL);
-
-/* Fast device at 0x1000 offset */
-#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
-
-static struct mmci_platform_data mmcsd_platform_data = {
- /*
- * Do not set ocr_mask or voltage translation function,
- * we have a regulator we can control instead.
- */
- .f_max = 24000000,
- .gpio_wp = -1,
- .gpio_cd = U300_GPIO_PIN_MMC_CD,
- .cd_invert = true,
- .capabilities = MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-#ifdef CONFIG_COH901318
- .dma_filter = coh901318_filter_id,
- .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX,
- /* Don't specify a TX channel, this RX channel is bidirectional */
-#endif
-};
-
-static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
- U300_MMCSD_IRQS, &mmcsd_platform_data);
-
-/*
- * The order of device declaration may be important, since some devices
- * have dependencies on other devices being initialized first.
- */
-static struct amba_device *amba_devs[] __initdata = {
- &uart0_device,
- &uart1_device,
- &pl022_device,
- &pl172_device,
- &mmcsd_device,
-};
-
-/* Here follows a list of all hw resources that the platform devices
- * allocate. Note, clock dependencies are not included
- */
-
-static struct resource gpio_resources[] = {
- {
- .start = U300_GPIO_BASE,
- .end = (U300_GPIO_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "gpio0",
- .start = IRQ_U300_GPIO_PORT0,
- .end = IRQ_U300_GPIO_PORT0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "gpio1",
- .start = IRQ_U300_GPIO_PORT1,
- .end = IRQ_U300_GPIO_PORT1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "gpio2",
- .start = IRQ_U300_GPIO_PORT2,
- .end = IRQ_U300_GPIO_PORT2,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "gpio3",
- .start = IRQ_U300_GPIO_PORT3,
- .end = IRQ_U300_GPIO_PORT3,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "gpio4",
- .start = IRQ_U300_GPIO_PORT4,
- .end = IRQ_U300_GPIO_PORT4,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "gpio5",
- .start = IRQ_U300_GPIO_PORT5,
- .end = IRQ_U300_GPIO_PORT5,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "gpio6",
- .start = IRQ_U300_GPIO_PORT6,
- .end = IRQ_U300_GPIO_PORT6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource keypad_resources[] = {
- {
- .start = U300_KEYPAD_BASE,
- .end = U300_KEYPAD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "coh901461-press",
- .start = IRQ_U300_KEYPAD_KEYBF,
- .end = IRQ_U300_KEYPAD_KEYBF,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "coh901461-release",
- .start = IRQ_U300_KEYPAD_KEYBR,
- .end = IRQ_U300_KEYPAD_KEYBR,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource rtc_resources[] = {
- {
- .start = U300_RTC_BASE,
- .end = U300_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_U300_RTC,
- .end = IRQ_U300_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/*
- * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
- * but these are not yet used by the driver.
- */
-static struct resource fsmc_resources[] = {
- {
- .name = "nand_addr",
- .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE,
- .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "nand_cmd",
- .start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE,
- .end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "nand_data",
- .start = U300_NAND_CS0_PHYS_BASE,
- .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "fsmc_regs",
- .start = U300_NAND_IF_PHYS_BASE,
- .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource i2c0_resources[] = {
- {
- .start = U300_I2C0_BASE,
- .end = U300_I2C0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_U300_I2C0,
- .end = IRQ_U300_I2C0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c1_resources[] = {
- {
- .start = U300_I2C1_BASE,
- .end = U300_I2C1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_U300_I2C1,
- .end = IRQ_U300_I2C1,
- .flags = IORESOURCE_IRQ,
- },
-
-};
-
-static struct resource wdog_resources[] = {
- {
- .start = U300_WDOG_BASE,
- .end = U300_WDOG_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_U300_WDOG,
- .end = IRQ_U300_WDOG,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource dma_resource[] = {
- {
- .start = U300_DMAC_BASE,
- .end = U300_DMAC_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_U300_DMA,
- .end = IRQ_U300_DMA,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-
-static struct resource pinctrl_resources[] = {
- {
- .start = U300_SYSCON_BASE,
- .end = U300_SYSCON_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device wdog_device = {
- .name = "coh901327_wdog",
- .id = -1,
- .num_resources = ARRAY_SIZE(wdog_resources),
- .resource = wdog_resources,
-};
-
-static struct platform_device i2c0_device = {
- .name = "stu300",
- .id = 0,
- .num_resources = ARRAY_SIZE(i2c0_resources),
- .resource = i2c0_resources,
-};
-
-static struct platform_device i2c1_device = {
- .name = "stu300",
- .id = 1,
- .num_resources = ARRAY_SIZE(i2c1_resources),
- .resource = i2c1_resources,
-};
-
-static struct platform_device pinctrl_device = {
- .name = "pinctrl-u300",
- .id = -1,
- .num_resources = ARRAY_SIZE(pinctrl_resources),
- .resource = pinctrl_resources,
-};
-
-/*
- * The different variants have a few different versions of the
- * GPIO block, with different number of ports.
- */
-static struct u300_gpio_platform u300_gpio_plat = {
- .ports = 7,
- .gpio_base = 0,
-};
-
-static struct platform_device gpio_device = {
- .name = "u300-gpio",
- .id = -1,
- .num_resources = ARRAY_SIZE(gpio_resources),
- .resource = gpio_resources,
- .dev = {
- .platform_data = &u300_gpio_plat,
- },
-};
-
-static struct platform_device keypad_device = {
- .name = "keypad",
- .id = -1,
- .num_resources = ARRAY_SIZE(keypad_resources),
- .resource = keypad_resources,
-};
-
-static struct platform_device rtc_device = {
- .name = "rtc-coh901331",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct mtd_partition u300_partitions[] = {
- {
- .name = "bootrecords",
- .offset = 0,
- .size = SZ_128K,
- },
- {
- .name = "free",
- .offset = SZ_128K,
- .size = 8064 * SZ_1K,
- },
- {
- .name = "platform",
- .offset = 8192 * SZ_1K,
- .size = 253952 * SZ_1K,
- },
-};
-
-static struct fsmc_nand_platform_data nand_platform_data = {
- .partitions = u300_partitions,
- .nr_partitions = ARRAY_SIZE(u300_partitions),
- .options = NAND_SKIP_BBTSCAN,
- .width = FSMC_NAND_BW8,
-};
-
-static struct platform_device nand_device = {
- .name = "fsmc-nand",
- .id = -1,
- .resource = fsmc_resources,
- .num_resources = ARRAY_SIZE(fsmc_resources),
- .dev = {
- .platform_data = &nand_platform_data,
- },
-};
-
-static struct platform_device dma_device = {
- .name = "coh901318",
- .id = -1,
- .resource = dma_resource,
- .num_resources = ARRAY_SIZE(dma_resource),
- .dev = {
- .coherent_dma_mask = ~0,
- },
-};
-
static unsigned long pin_pullup_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
};
@@ -467,61 +219,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = {
pin_highz_conf),
};
-/*
- * Notice that AMBA devices are initialized before platform devices.
- *
- */
-static struct platform_device *platform_devs[] __initdata = {
- &dma_device,
- &i2c0_device,
- &i2c1_device,
- &keypad_device,
- &rtc_device,
- &pinctrl_device,
- &gpio_device,
- &nand_device,
- &wdog_device,
-};
-
-/*
- * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
- * together so some interrupts are connected to the first one and some
- * to the second one.
- */
-static void __init u300_init_irq(void)
-{
- u32 mask[2] = {0, 0};
- struct clk *clk;
- int i;
-
- /* initialize clocking early, we want to clock the INTCON */
- u300_clk_init(U300_SYSCON_VBASE);
-
- /* Bootstrap EMIF and SEMI clocks */
- clk = clk_get_sys("pl172", NULL);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- clk = clk_get_sys("semi", NULL);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
-
- /* Clock the interrupt controller */
- clk = clk_get_sys("intcon", NULL);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
-
- for (i = 0; i < U300_VIC_IRQS_END; i++)
- set_bit(i, (unsigned long *) &mask[0]);
- vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
- mask[0], mask[0]);
- vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
- mask[1], mask[1]);
-}
-
-
-/*
- * U300 platforms peripheral handling
- */
struct db_chip {
u16 chipid;
const char *name;
@@ -578,7 +275,7 @@ static void __init u300_init_check_chip(void)
const char unknown[] = "UNKNOWN";
/* Read out and print chip ID */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+ val = readw(syscon_base + U300_SYSCON_CIDR);
/* This is in funky bigendian order... */
val = (val & 0xFFU) << 8 | (val >> 8);
chip = db_chips;
@@ -600,74 +297,6 @@ static void __init u300_init_check_chip(void)
}
}
-/*
- * Some devices and their resources require reserved physical memory from
- * the end of the available RAM. This function traverses the list of devices
- * and assigns actual addresses to these.
- */
-static void __init u300_assign_physmem(void)
-{
- unsigned long curr_start = __pa(high_memory);
- int i, j;
-
- for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
- for (j = 0; j < platform_devs[i]->num_resources; j++) {
- struct resource *const res =
- &platform_devs[i]->resource[j];
-
- if (IORESOURCE_MEM == res->flags &&
- 0 == res->start) {
- res->start = curr_start;
- res->end += curr_start;
- curr_start += resource_size(res);
-
- printk(KERN_INFO "core.c: Mapping RAM " \
- "%#x-%#x to device %s:%s\n",
- res->start, res->end,
- platform_devs[i]->name, res->name);
- }
- }
- }
-}
-
-static void __init u300_init_machine(void)
-{
- int i;
- u16 val;
-
- /* Check what platform we run and print some status information */
- u300_init_check_chip();
-
- /* Initialize SPI device with some board specifics */
- u300_spi_init(&pl022_device);
-
- /* Register the AMBA devices in the AMBA bus abstraction layer */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
- struct amba_device *d = amba_devs[i];
- amba_device_register(d, &iomem_resource);
- }
-
- u300_assign_physmem();
-
- /* Initialize pinmuxing */
- pinctrl_register_mappings(u300_pinmux_map,
- ARRAY_SIZE(u300_pinmux_map));
-
- /* Register subdevices on the I2C buses */
- u300_i2c_register_board_devices();
-
- /* Register the platform devices */
- platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
- /* Register subdevices on the SPI bus */
- u300_spi_register_board_devices();
-
- /* Enable SEMI self refresh */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
- U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
-}
-
/* Forward declare this function from the watchdog */
void coh901327_watchdog_reset(void);
@@ -688,13 +317,99 @@ static void u300_restart(char mode, const char *cmd)
while (1);
}
-MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
- /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .atag_offset = 0x100,
+/* These are mostly to get the right device names for the clock lookups */
+static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE,
+ "pinctrl-u300", NULL),
+ OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE,
+ "u300-gpio", NULL),
+ OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE,
+ "coh901327_wdog", NULL),
+ OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE,
+ "rtc-coh901331", NULL),
+ OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE,
+ "coh901318", NULL),
+ OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE,
+ "fsmc-nand", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE,
+ "uart0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE,
+ "uart1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE,
+ "pl022", NULL),
+ OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE,
+ "stu300.0", NULL),
+ OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE,
+ "stu300.1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE,
+ "mmci", NULL),
+ { /* sentinel */ },
+};
+
+static void __init u300_init_irq_dt(void)
+{
+ struct device_node *syscon;
+ struct clk *clk;
+
+ syscon = of_find_node_by_path("/syscon@c0011000");
+ if (!syscon) {
+ pr_crit("could not find syscon node\n");
+ return;
+ }
+ syscon_base = of_iomap(syscon, 0);
+ if (!syscon_base) {
+ pr_crit("could not remap syscon\n");
+ return;
+ }
+ /* initialize clocking early, we want to clock the INTCON */
+ u300_clk_init(syscon_base);
+
+ /* Bootstrap EMIF and SEMI clocks */
+ clk = clk_get_sys("pl172", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ clk = clk_get_sys("semi", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+
+ /* Clock the interrupt controller */
+ clk = clk_get_sys("intcon", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+
+ irqchip_init();
+}
+
+static void __init u300_init_machine_dt(void)
+{
+ u16 val;
+
+ /* Check what platform we run and print some status information */
+ u300_init_check_chip();
+
+ /* Initialize pinmuxing */
+ pinctrl_register_mappings(u300_pinmux_map,
+ ARRAY_SIZE(u300_pinmux_map));
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ u300_auxdata_lookup, NULL);
+
+ /* Enable SEMI self refresh */
+ val = readw(syscon_base + U300_SYSCON_SMCR) |
+ U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+ writew(val, syscon_base + U300_SYSCON_SMCR);
+}
+
+static const char * u300_board_compat[] = {
+ "stericsson,u300",
+ NULL,
+};
+
+DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
.map_io = u300_map_io,
- .nr_irqs = 0,
- .init_irq = u300_init_irq,
- .init_time = u300_timer_init,
- .init_machine = u300_init_machine,
+ .init_irq = u300_init_irq_dt,
+ .init_time = clocksource_of_init,
+ .init_machine = u300_init_machine_dt,
.restart = u300_restart,
+ .dt_compat = u300_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index 2785cb67b5e..ec0283cf9a3 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -263,28 +263,22 @@ static int pl022_dummy_remove(struct spi_device *spi)
return 0;
}
+static const struct of_device_id pl022_dummy_dt_match[] = {
+ { .compatible = "arm,pl022-dummy" },
+ {},
+};
+
static struct spi_driver pl022_dummy_driver = {
.driver = {
.name = "spi-dummy",
.owner = THIS_MODULE,
+ .of_match_table = pl022_dummy_dt_match,
},
.probe = pl022_dummy_probe,
.remove = pl022_dummy_remove,
};
-static int __init pl022_init_dummy(void)
-{
- return spi_register_driver(&pl022_dummy_driver);
-}
-
-static void __exit pl022_exit_dummy(void)
-{
- spi_unregister_driver(&pl022_dummy_driver);
-}
-
-module_init(pl022_init_dummy);
-module_exit(pl022_exit_dummy);
-
+module_spi_driver(pl022_dummy_driver);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
deleted file mode 100644
index 96800aa1316..00000000000
--- a/arch/arm/mach-u300/i2c.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * arch/arm/mach-u300/i2c.c
- *
- * Copyright (C) 2009-2012 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Register board i2c devices
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/mfd/ab3100.h>
-#include <linux/regulator/machine.h>
-#include <linux/amba/bus.h>
-#include <mach/irqs.h>
-
-/*
- * Initial settings of ab3100 registers.
- * Common for below LDO regulator settings are that
- * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
- * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
- */
-
-/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
-#define LDO_A_SETTING 0x16
-/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_C_SETTING 0x10
-/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
-#define LDO_D_SETTING 0x10
-/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_E_SETTING 0x10
-/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
-#define LDO_E_SLEEP_SETTING 0x00
-/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_F_SETTING 0xD0
-/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_G_SETTING 0x00
-/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
-#define LDO_H_SETTING 0x18
-/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_K_SETTING 0x00
-/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
-#define LDO_EXT_SETTING 0x00
-/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
-#define BUCK_SETTING 0x7D
-/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
-#define BUCK_SLEEP_SETTING 0xAC
-
-#ifdef CONFIG_AB3100_CORE
-static struct regulator_consumer_supply supply_ldo_c[] = {
- {
- .dev_name = "ab3100-codec",
- .supply = "vaudio", /* Powers the codec */
- },
-};
-
-/*
- * This one needs to be a supply so we can turn it off
- * in order to shut down the system.
- */
-static struct regulator_consumer_supply supply_ldo_d[] = {
- {
- .supply = "vana15", /* Powers the SoC (CPU etc) */
- },
-};
-
-static struct regulator_consumer_supply supply_ldo_g[] = {
- {
- .dev_name = "mmci",
- .supply = "vmmc", /* Powers MMC/SD card */
- },
-};
-
-static struct regulator_consumer_supply supply_ldo_h[] = {
- {
- .dev_name = "xgam_pdi",
- .supply = "vdisp", /* Powers camera, display etc */
- },
-};
-
-static struct regulator_consumer_supply supply_ldo_k[] = {
- {
- .dev_name = "irda",
- .supply = "vir", /* Power IrDA */
- },
-};
-
-/*
- * This is a placeholder for whoever wish to use the
- * external power.
- */
-static struct regulator_consumer_supply supply_ldo_ext[] = {
- {
- .supply = "vext", /* External power */
- },
-};
-
-/* Preset (hardware defined) voltages for these regulators */
-#define LDO_A_VOLTAGE 2750000
-#define LDO_C_VOLTAGE 2650000
-#define LDO_D_VOLTAGE 2650000
-
-static struct ab3100_platform_data ab3100_plf_data = {
- .reg_constraints = {
- /* LDO A routing and constraints */
- {
- .constraints = {
- .name = "vrad",
- .min_uV = LDO_A_VOLTAGE,
- .max_uV = LDO_A_VOLTAGE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- .boot_on = 1,
- },
- },
- /* LDO C routing and constraints */
- {
- .constraints = {
- .min_uV = LDO_C_VOLTAGE,
- .max_uV = LDO_C_VOLTAGE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- },
- .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
- .consumer_supplies = supply_ldo_c,
- },
- /* LDO D routing and constraints */
- {
- .constraints = {
- .min_uV = LDO_D_VOLTAGE,
- .max_uV = LDO_D_VOLTAGE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- /*
- * Actually this is boot_on but we need
- * to reference count it externally to
- * be able to shut down the system.
- */
- },
- .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
- .consumer_supplies = supply_ldo_d,
- },
- /* LDO E routing and constraints */
- {
- .constraints = {
- .name = "vio",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- .boot_on = 1,
- },
- },
- /* LDO F routing and constraints */
- {
- .constraints = {
- .name = "vana25",
- .min_uV = 2500000,
- .max_uV = 2500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- .boot_on = 1,
- },
- },
- /* LDO G routing and constraints */
- {
- .constraints = {
- .min_uV = 1500000,
- .max_uV = 2850000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
- .consumer_supplies = supply_ldo_g,
- },
- /* LDO H routing and constraints */
- {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 2750000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
- .consumer_supplies = supply_ldo_h,
- },
- /* LDO K routing and constraints */
- {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 2750000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
- .consumer_supplies = supply_ldo_k,
- },
- /* External regulator interface. No fixed voltage specified.
- * If we knew the voltage of the external regulator and it
- * was connected on the board, we could add the (fixed)
- * voltage for it here.
- */
- {
- .constraints = {
- .min_uV = 0,
- .max_uV = 0,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask =
- REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
- .consumer_supplies = supply_ldo_ext,
- },
- /* Buck converter routing and constraints */
- {
- .constraints = {
- .name = "vcore",
- .min_uV = 1200000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- },
- },
- },
- .reg_initvals = {
- LDO_A_SETTING,
- LDO_C_SETTING,
- LDO_E_SETTING,
- LDO_E_SLEEP_SETTING,
- LDO_F_SETTING,
- LDO_G_SETTING,
- LDO_H_SETTING,
- LDO_K_SETTING,
- LDO_EXT_SETTING,
- BUCK_SETTING,
- BUCK_SLEEP_SETTING,
- LDO_D_SETTING,
- },
-};
-#endif
-
-static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
-#ifdef CONFIG_AB3100_CORE
- {
- .type = "ab3100",
- .addr = 0x48,
- .irq = IRQ_U300_IRQ0_EXT,
- .platform_data = &ab3100_plf_data,
- },
-#else
- { },
-#endif
-};
-
-static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
- {
- .type = "fwcam",
- .addr = 0x10,
- },
- {
- .type = "fwcam",
- .addr = 0x5d,
- },
-};
-
-void __init u300_i2c_register_board_devices(void)
-{
- i2c_register_board_info(0, bus0_i2c_board_info,
- ARRAY_SIZE(bus0_i2c_board_info));
- /*
- * This makes the core shut down all unused regulators
- * after all the initcalls have completed.
- */
- regulator_has_full_constraints();
- i2c_register_board_info(1, bus1_i2c_board_info,
- ARRAY_SIZE(bus1_i2c_board_info));
-}
diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h
deleted file mode 100644
index 485c02e5c06..00000000000
--- a/arch/arm/mach-u300/i2c.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-u300/i2c.h
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Register board i2c devices
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef MACH_U300_I2C_H
-#define MACH_U300_I2C_H
-
-#ifdef CONFIG_I2C_STU300
-void __init u300_i2c_register_board_devices(void);
-#else
-/* Compile out this stuff if no I2C adapter is available */
-static inline void __init u300_i2c_register_board_devices(void)
-{
-}
-#endif
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
deleted file mode 100644
index 8ae8e4ab34b..00000000000
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *
- * arch-arm/mach-u300/include/mach/debug-macro.S
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Debugging macro include header.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <mach/hardware.h>
-
- .macro addruart, rp, rv, tmp
- /* If we move the address using MMU, use this. */
- ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
- ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
- orr \rp, \rp, #0x00003000
- orr \rv, \rv, #0x00003000
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h
deleted file mode 100644
index b99d4ce0ac2..00000000000
--- a/arch/arm/mach-u300/include/mach/hardware.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/hardware.h
- */
-#include <asm/sizes.h>
-#include <mach/u300-regs.h>
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
deleted file mode 100644
index 21d5e76a6cd..00000000000
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/irqs.h
- *
- *
- * Copyright (C) 2006-2012 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * IRQ channel definitions for the U300 platforms.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define IRQ_U300_INTCON0_START 32
-#define IRQ_U300_INTCON1_START 64
-/* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT 32
-#define IRQ_U300_IRQ1_EXT 33
-#define IRQ_U300_DMA 34
-#define IRQ_U300_VIDEO_ENC_0 35
-#define IRQ_U300_VIDEO_ENC_1 36
-#define IRQ_U300_AAIF_RX 37
-#define IRQ_U300_AAIF_TX 38
-#define IRQ_U300_AAIF_VGPIO 39
-#define IRQ_U300_AAIF_WAKEUP 40
-#define IRQ_U300_PCM_I2S0_FRAME 41
-#define IRQ_U300_PCM_I2S0_FIFO 42
-#define IRQ_U300_PCM_I2S1_FRAME 43
-#define IRQ_U300_PCM_I2S1_FIFO 44
-#define IRQ_U300_XGAM_GAMCON 45
-#define IRQ_U300_XGAM_CDI 46
-#define IRQ_U300_XGAM_CDICON 47
-#define IRQ_U300_XGAM_PDI 49
-#define IRQ_U300_XGAM_PDICON 50
-#define IRQ_U300_XGAM_GAMEACC 51
-#define IRQ_U300_XGAM_MCIDCT 52
-#define IRQ_U300_APEX 53
-#define IRQ_U300_UART0 54
-#define IRQ_U300_SPI 55
-#define IRQ_U300_TIMER_APP_OS 56
-#define IRQ_U300_TIMER_APP_DD 57
-#define IRQ_U300_TIMER_APP_GP1 58
-#define IRQ_U300_TIMER_APP_GP2 59
-#define IRQ_U300_TIMER_OS 60
-#define IRQ_U300_TIMER_MS 61
-#define IRQ_U300_KEYPAD_KEYBF 62
-#define IRQ_U300_KEYPAD_KEYBR 63
-/* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0 64
-#define IRQ_U300_GPIO_PORT1 65
-#define IRQ_U300_GPIO_PORT2 66
-
-/* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG 67
-#define IRQ_U300_EVHIST 68
-#define IRQ_U300_MSPRO 69
-#define IRQ_U300_MMCSD_MCIINTR0 70
-#define IRQ_U300_MMCSD_MCIINTR1 71
-#define IRQ_U300_I2C0 72
-#define IRQ_U300_I2C1 73
-#define IRQ_U300_RTC 74
-#define IRQ_U300_NFIF 75
-#define IRQ_U300_NFIF2 76
-
-/* The DB3350-specific interrupt lines */
-#define IRQ_U300_ISP_F0 77
-#define IRQ_U300_ISP_F1 78
-#define IRQ_U300_ISP_F2 79
-#define IRQ_U300_ISP_F3 80
-#define IRQ_U300_ISP_F4 81
-#define IRQ_U300_GPIO_PORT3 82
-#define IRQ_U300_SYSCON_PLL_LOCK 83
-#define IRQ_U300_UART1 84
-#define IRQ_U300_GPIO_PORT4 85
-#define IRQ_U300_GPIO_PORT5 86
-#define IRQ_U300_GPIO_PORT6 87
-#define U300_VIC_IRQS_END 88
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
deleted file mode 100644
index 10bdd0be977..00000000000
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/syscon.h
- *
- *
- * Copyright (C) 2008-2012 ST-Ericsson AB
- *
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#ifndef __MACH_SYSCON_H
-#define __MACH_SYSCON_H
-
-/*
- * All register defines for SYSCON registers that concerns individual
- * block clocks and reset lines are registered here. This is because
- * we don't want any other file to try to fool around with this stuff.
- */
-
-/* APP side SYSCON registers */
-/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
-/* CLK Control Register 16bit (R/W) */
-#define U300_SYSCON_CCR (0x0000)
-#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040)
-#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020)
-#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00)
-/* CLK Status Register 16bit (R/W) */
-#define U300_SYSCON_CSR (0x0004)
-#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002)
-#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001)
-/* Reset lines for SLOW devices 16bit (R/W) */
-#define U300_SYSCON_RSR (0x0014)
-#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200)
-#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100)
-#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080)
-#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040)
-#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020)
-#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010)
-#define U300_SYSCON_RSR_EH_RESET_EN (0x0008)
-#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004)
-#define U300_SYSCON_RSR_UART_RESET_EN (0x0002)
-#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001)
-/* Reset lines for FAST devices 16bit (R/W) */
-#define U300_SYSCON_RFR (0x0018)
-#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080)
-#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040)
-#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020)
-#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010)
-#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008)
-#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004)
-#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002)
-#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001)
-/* Reset lines for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_RRR (0x001c)
-#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000)
-#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000)
-#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000)
-#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800)
-#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100)
-#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080)
-#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040)
-#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020)
-#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010)
-#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008)
-#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004)
-#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002)
-#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001)
-/* Clock enable for SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CESR (0x0020)
-#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200)
-#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100)
-#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080)
-#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040)
-#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010)
-#define U300_SYSCON_CESR_EH_CLK_EN (0x0008)
-#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004)
-#define U300_SYSCON_CESR_UART_CLK_EN (0x0002)
-#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001)
-/* Clock enable for FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CEFR (0x0024)
-#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200)
-#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100)
-#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080)
-#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040)
-#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
-#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001)
-/* Clock enable for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CERR (0x0028)
-#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000)
-#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000)
-#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800)
-#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400)
-#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200)
-#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100)
-#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080)
-#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040)
-#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020)
-#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010)
-#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008)
-#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004)
-#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002)
-#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001)
-/* Single block clock enable 16bit (-/W) */
-#define U300_SYSCON_SBCER (0x002c)
-#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009)
-#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008)
-#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007)
-#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006)
-#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004)
-#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003)
-#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002)
-#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001)
-#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000)
-#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019)
-#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018)
-#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017)
-#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016)
-#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015)
-#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014)
-#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013)
-#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012)
-#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011)
-#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010)
-#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D)
-#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C)
-#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B)
-#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A)
-#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029)
-#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028)
-#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027)
-#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026)
-#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025)
-#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024)
-#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023)
-#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022)
-#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021)
-#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020)
-/* Single block clock disable 16bit (-/W) */
-#define U300_SYSCON_SBCDR (0x0030)
-/* Same values as above for SBCER */
-/* Clock force SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CFSR (0x003c)
-#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200)
-#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100)
-#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080)
-#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020)
-#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010)
-#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008)
-#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004)
-#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002)
-#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001)
-/* Clock force FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CFFR (0x40)
-/* Values not defined. Define if you want to use them. */
-/* Clock force the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CFRR (0x44)
-#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000)
-#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000)
-#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800)
-#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400)
-#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200)
-#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100)
-#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080)
-#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040)
-#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020)
-#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010)
-#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008)
-#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004)
-#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002)
-#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001)
-/* PLL208 Frequency Control 16bit (R/W) */
-#define U300_SYSCON_PFCR (0x48)
-#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F)
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR (0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
-/*
- * All other clocking registers moved to clock.c!
- */
-/* Reset Out 16bit (R/W) */
-#define U300_SYSCON_RCR (0x6c)
-#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001)
-/* EMIF Slew Rate Control 16bit (R/W) */
-#define U300_SYSCON_SRCLR (0x70)
-#define U300_SYSCON_SRCLR_MASK (0x03FF)
-#define U300_SYSCON_SRCLR_VALUE (0x03FF)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001)
-/* EMIF Clock Control Register 16bit (R/W) */
-#define U300_SYSCON_ECCR (0x0078)
-#define U300_SYSCON_ECCR_MASK (0x000F)
-#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008)
-#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004)
-#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002)
-#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001)
-/* Step one for killing the applications system 16bit (-/W) */
-#define U300_SYSCON_KA1R (0x0080)
-#define U300_SYSCON_KA1R_MASK (0xFFFF)
-#define U300_SYSCON_KA1R_VALUE (0xFFFF)
-/* Step two for killing the application system 16bit (-/W) */
-#define U300_SYSCON_KA2R (0x0084)
-#define U300_SYSCON_KA2R_MASK (0xFFFF)
-#define U300_SYSCON_KA2R_VALUE (0xFFFF)
-/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
-#define U300_SYSCON_MMF0R (0x90)
-#define U300_SYSCON_MMF0R_MASK (0x00FF)
-#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0)
-#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F)
-/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
-#define U300_SYSCON_MMF1R (0x94)
-#define U300_SYSCON_MMF1R_MASK (0x00FF)
-#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0)
-#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F)
-/* AAIF control register 16 bit (R/W) */
-#define U300_SYSCON_AAIFCR (0x98)
-#define U300_SYSCON_AAIFCR_MASK (0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003)
-/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
-#define U300_SYSCON_MMCR (0x9C)
-#define U300_SYSCON_MMCR_MASK (0x0003)
-#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002)
-#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001)
-/* Pull up/down control (R/W) */
-#define U300_SYSCON_PUCR (0x104)
-#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200)
-#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100)
-#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080)
-#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040)
-#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F)
-/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
-#define U300_SYSCON_S0CCR (0x120)
-#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
-#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
-#define U300_SYSCON_S1CCR (0x124)
-#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
-#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
-#define U300_SYSCON_S2CCR (0x128)
-#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
-#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
-#define U300_SYSCON_MCR (0x12c)
-#define U300_SYSCON_MCR_FIELD_MASK (0x00FF)
-#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040)
-#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010)
-#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020)
-#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C)
-#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002)
-#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001)
-/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
-#define U300_SYSCON_PICR (0x0130)
-#define U300_SYSCON_PICR_MASK (0x00FF)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001)
-/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
-#define U300_SYSCON_PISR (0x0134)
-#define U300_SYSCON_PISR_MASK (0x000F)
-#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008)
-#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004)
-#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002)
-#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001)
-/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
-#define U300_SYSCON_PICLR (0x0138)
-#define U300_SYSCON_PICLR_MASK (0x000F)
-#define U300_SYSCON_PICLR_RWMASK (0x0000)
-#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008)
-#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004)
-#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002)
-#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001)
-/* CAMIF_CONTROL 16 bit (-/W) */
-#define U300_SYSCON_CICR (0x013C)
-#define U300_SYSCON_CICR_MASK (0x0FFF)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003)
-/* Clock activity observability register 0 */
-#define U300_SYSCON_C0OAR (0x140)
-#define U300_SYSCON_C0OAR_MASK (0xFFFF)
-#define U300_SYSCON_C0OAR_VALUE (0xFFFF)
-#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000)
-#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000)
-#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000)
-#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000)
-#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800)
-#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400)
-#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200)
-#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100)
-#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080)
-#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040)
-#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020)
-#define U300_SYSCON_C0OAR_APEX_CLK (0x0010)
-#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008)
-#define U300_SYSCON_C0OAR_AHB_CLK (0x0004)
-#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002)
-#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001)
-/* Clock activity observability register 1 */
-#define U300_SYSCON_C1OAR (0x144)
-#define U300_SYSCON_C1OAR_MASK (0x3FFE)
-#define U300_SYSCON_C1OAR_VALUE (0x3FFE)
-#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000)
-#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000)
-#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800)
-#define U300_SYSCON_C1OAR_MMC_CLK (0x0400)
-#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200)
-#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100)
-#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080)
-#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040)
-#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020)
-#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010)
-#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008)
-#define U300_SYSCON_C1OAR_PPM_CLK (0x0004)
-#define U300_SYSCON_C1OAR_DMA_CLK (0x0002)
-/* Clock activity observability register 2 */
-#define U300_SYSCON_C2OAR (0x148)
-#define U300_SYSCON_C2OAR_MASK (0x0FFF)
-#define U300_SYSCON_C2OAR_VALUE (0x0FFF)
-#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800)
-#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400)
-#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200)
-#define U300_SYSCON_C2OAR_VC_CLK (0x0100)
-#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080)
-#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040)
-#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020)
-#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001)
-
-/* Chip ID register 16bit (R/-) */
-#define U300_SYSCON_CIDR (0x400)
-/* Video IRQ clear 16bit (R/W) */
-#define U300_SYSCON_VICR (0x404)
-#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002)
-#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001)
-/* SMCR */
-#define U300_SYSCON_SMCR (0x4d0)
-#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
-#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
-#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
-#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
-/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
-#define U300_SYSCON_CSDR (0x4f0)
-#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
-/* PRINT_CONTROL Print Control 16bit (R/-) */
-#define U300_SYSCON_PCR (0x4f8)
-#define U300_SYSCON_PCR_SERV_IND (0x0001)
-/* BOOT_CONTROL 16bit (R/-) */
-#define U300_SYSCON_BCR (0x4fc)
-#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
-#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
-#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
-#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
-
-
-/* CPU clock defines */
-/**
- * CPU high frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_HIGH 208
-/**
- * CPU medium frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_MEDIUM 52
-/**
- * CPU low frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_LOW 13
-
-/* EMIF clock defines */
-/**
- * EMIF high frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_HIGH 104
-/**
- * EMIF medium frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_MEDIUM 52
-/**
- * EMIF low frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_LOW 13
-
-/* AHB clock defines */
-/**
- * AHB high frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_HIGH 52
-/**
- * AHB medium frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_MEDIUM 26
-/**
- * AHB low frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */
-
-enum syscon_busmaster {
- SYSCON_BM_DMAC,
- SYSCON_BM_XGAM,
- SYSCON_BM_VIDEO_ENC
-};
-
-/* Selectr a resistor or a set of resistors */
-enum syscon_pull_up_down {
- SYSCON_PU_KEY_IN_EN,
- SYSCON_PU_EMIF_1_8_BIT_EN,
- SYSCON_PU_EMIF_1_16_BIT_EN,
- SYSCON_PU_EMIF_1_NFIF_READY_EN,
- SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
-};
-
-/*
- * Note that this array must match the order of the array "clk_reg"
- * in syscon.c
- */
-enum syscon_clk {
- SYSCON_CLKCONTROL_SLOW_BRIDGE,
- SYSCON_CLKCONTROL_UART,
- SYSCON_CLKCONTROL_BTR,
- SYSCON_CLKCONTROL_EH,
- SYSCON_CLKCONTROL_GPIO,
- SYSCON_CLKCONTROL_KEYPAD,
- SYSCON_CLKCONTROL_APP_TIMER,
- SYSCON_CLKCONTROL_ACC_TIMER,
- SYSCON_CLKCONTROL_FAST_BRIDGE,
- SYSCON_CLKCONTROL_I2C0,
- SYSCON_CLKCONTROL_I2C1,
- SYSCON_CLKCONTROL_I2S0,
- SYSCON_CLKCONTROL_I2S1,
- SYSCON_CLKCONTROL_MMC,
- SYSCON_CLKCONTROL_SPI,
- SYSCON_CLKCONTROL_I2S0_CORE,
- SYSCON_CLKCONTROL_I2S1_CORE,
- SYSCON_CLKCONTROL_UART1,
- SYSCON_CLKCONTROL_AAIF,
- SYSCON_CLKCONTROL_AHB,
- SYSCON_CLKCONTROL_APEX,
- SYSCON_CLKCONTROL_CPU,
- SYSCON_CLKCONTROL_DMA,
- SYSCON_CLKCONTROL_EMIF,
- SYSCON_CLKCONTROL_NAND_IF,
- SYSCON_CLKCONTROL_VIDEO_ENC,
- SYSCON_CLKCONTROL_XGAM,
- SYSCON_CLKCONTROL_SEMI,
- SYSCON_CLKCONTROL_AHB_SUBSYS,
- SYSCON_CLKCONTROL_MSPRO
-};
-
-enum syscon_sysclk_mode {
- SYSCON_SYSCLK_DISABLED,
- SYSCON_SYSCLK_M_CLK,
- SYSCON_SYSCLK_ACC_FSM,
- SYSCON_SYSCLK_PLL60_48,
- SYSCON_SYSCLK_PLL60_60,
- SYSCON_SYSCLK_ACC_PLL208,
- SYSCON_SYSCLK_APP_PLL13,
- SYSCON_SYSCLK_APP_FSM,
- SYSCON_SYSCLK_RTC,
- SYSCON_SYSCLK_APP_PLL208
-};
-
-enum syscon_sysclk_req {
- SYSCON_SYSCLKREQ_DISABLED,
- SYSCON_SYSCLKREQ_ACTIVE_LOW,
- SYSCON_SYSCLKREQ_MONITOR
-};
-
-enum syscon_clk_mode {
- SYSCON_CLKMODE_OFF,
- SYSCON_CLKMODE_DEFAULT,
- SYSCON_CLKMODE_LOW,
- SYSCON_CLKMODE_MEDIUM,
- SYSCON_CLKMODE_HIGH,
- SYSCON_CLKMODE_PERMANENT,
- SYSCON_CLKMODE_ON,
-};
-
-enum syscon_call_mode {
- SYSCON_CLKCALL_NOWAIT,
- SYSCON_CLKCALL_WAIT,
-};
-
-int syscon_dc_on(bool keep_power_on);
-int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
- bool active);
-bool syscon_get_busmaster_active_state(void);
-int syscon_set_sleep_mask(enum syscon_clk,
- bool sleep_ctrl);
-int syscon_config_sysclk(u32 sysclk,
- enum syscon_sysclk_mode sysclkmode,
- bool inverse,
- u32 divisor,
- enum syscon_sysclk_req sysclkreq);
-bool syscon_can_turn_off_semi_clock(void);
-
-/* This function is restricted to core.c */
-int syscon_request_normal_power(bool req);
-
-/* This function is restricted to be used by platform_speed.c */
-int syscon_speed_request(enum syscon_call_mode wait_mode,
- enum syscon_clk_mode req_clk_mode);
-#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h
deleted file mode 100644
index f233b72633f..00000000000
--- a/arch/arm/mach-u300/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/timex.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Platform tick rate definition.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-/* This is for the APP OS GP1 (General Purpose 1) timer */
-#define CLOCK_TICK_RATE 1000000
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
deleted file mode 100644
index 0320495efc4..00000000000
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/u300-regs.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic register address definitions in physical memory and
- * some block definitions for core devices like the timer.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_REGS_H
-#define __MACH_U300_REGS_H
-
-/*
- * These are the large blocks of memory allocated for I/O.
- * the defines are used for setting up the I/O memory mapping.
- */
-
-/* NAND Flash CS0 */
-#define U300_NAND_CS0_PHYS_BASE 0x80000000
-
-/* NFIF */
-#define U300_NAND_IF_PHYS_BASE 0x9f800000
-
-/* ALE, CLE offset for FSMC NAND */
-#define PLAT_NAND_CLE (1 << 16)
-#define PLAT_NAND_ALE (1 << 17)
-
-/* AHB Peripherals */
-#define U300_AHB_PER_PHYS_BASE 0xa0000000
-#define U300_AHB_PER_VIRT_BASE 0xff010000
-
-/* FAST Peripherals */
-#define U300_FAST_PER_PHYS_BASE 0xc0000000
-#define U300_FAST_PER_VIRT_BASE 0xff020000
-
-/* SLOW Peripherals */
-#define U300_SLOW_PER_PHYS_BASE 0xc0010000
-#define U300_SLOW_PER_VIRT_BASE 0xff000000
-
-/* Boot ROM */
-#define U300_BOOTROM_PHYS_BASE 0xffff0000
-#define U300_BOOTROM_VIRT_BASE 0xffff0000
-
-/* SEMI config base */
-#define U300_SEMI_CONFIG_BASE 0x2FFE0000
-
-/*
- * AHB peripherals
- */
-
-/* AHB Peripherals Bridge Controller */
-#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
-
-/* Vectored Interrupt Controller 0, servicing 32 interrupts */
-#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
-
-/* Vectored Interrupt Controller 1, servicing 32 interrupts */
-#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
-
-/* Memory Stick Pro (MSPRO) controller */
-#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
-
-/* EMIF Configuration Area */
-#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
-
-
-/*
- * FAST peripherals
- */
-
-/* FAST bridge control */
-#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
-
-/* MMC/SD controller */
-#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
-
-/* PCM I2S0 controller */
-#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
-
-/* PCM I2S1 controller */
-#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
-
-/* I2C0 controller */
-#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
-
-/* I2C1 controller */
-#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
-
-/* SPI controller */
-#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
-
-/* Fast UART1 on U335 only */
-#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000)
-
-/*
- * SLOW peripherals
- */
-
-/* SLOW bridge control */
-#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
-
-/* SYSCON */
-#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
-
-/* Watchdog */
-#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
-
-/* UART0 */
-#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
-
-/* APP side special timer */
-#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
-
-/* Keypad */
-#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
-
-/* GPIO */
-#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
-
-/* RTC */
-#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
-
-/* Bus tracer */
-#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
-
-/* Event handler (hardware queue) */
-#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
-
-/* Genric Timer */
-#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
-
-/* PPM */
-#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
-
-
-/*
- * REST peripherals
- */
-
-/* ISP (image signal processor) */
-#define U300_ISP_BASE (0xA0008000)
-
-/* DMA Controller base */
-#define U300_DMAC_BASE (0xC0020000)
-
-/* MSL Base */
-#define U300_MSL_BASE (0xc0022000)
-
-/* APEX Base */
-#define U300_APEX_BASE (0xc0030000)
-
-/* Video Encoder Base */
-#define U300_VIDEOENC_BASE (0xc0080000)
-
-/* XGAM Base */
-#define U300_XGAM_BASE (0xd0000000)
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h
deleted file mode 100644
index 783e7e60101..00000000000
--- a/arch/arm/mach-u300/include/mach/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000)
-#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C)
-#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030)
-#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- while (AMBA_UART_FR & (1 << 5))
- barrier();
-
- AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
- while (AMBA_UART_FR & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index 9c53f01c62e..bf40cd478fe 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -10,11 +10,18 @@
#include <linux/device.h>
#include <linux/signal.h>
#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
-/* Those are just for writing in syscon */
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/syscon.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR (0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
/*
* Regulators that power the board and chip and which are
@@ -47,13 +54,28 @@ void u300_pm_poweroff(void)
/*
* Hog the regulators needed to power up the board.
*/
-static int __init u300_init_boardpower(void)
+static int __init __u300_init_boardpower(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *syscon_np;
+ struct regmap *regmap;
int err;
- u32 val;
pr_info("U300: setting up board power\n");
- main_power_15 = regulator_get(NULL, "vana15");
+
+ syscon_np = of_parse_phandle(np, "syscon", 0);
+ if (!syscon_np) {
+ pr_crit("U300: no syscon node\n");
+ return -ENODEV;
+ }
+ regmap = syscon_node_to_regmap(syscon_np);
+ if (!regmap) {
+ pr_crit("U300: could not locate syscon regmap\n");
+ return -ENODEV;
+ }
+
+ main_power_15 = regulator_get(&pdev->dev, "vana15");
+
if (IS_ERR(main_power_15)) {
pr_err("could not get vana15");
return PTR_ERR(main_power_15);
@@ -72,9 +94,8 @@ static int __init u300_init_boardpower(void)
* the rest of the U300 power management is implemented.
*/
pr_info("U300: disable system controller pull-up\n");
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
- val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+ regmap_update_bits(regmap, U300_SYSCON_PMCR,
+ U300_SYSCON_PMCR_DCON_ENABLE, 0);
/* Register globally exported PM poweroff hook */
pm_power_off = u300_pm_poweroff;
@@ -82,7 +103,31 @@ static int __init u300_init_boardpower(void)
return 0;
}
+static int __init s365_board_probe(struct platform_device *pdev)
+{
+ return __u300_init_boardpower(pdev);
+}
+
+static const struct of_device_id s365_board_match[] = {
+ { .compatible = "stericsson,s365" },
+ {},
+};
+
+static struct platform_driver s365_board_driver = {
+ .driver = {
+ .name = "s365-board",
+ .owner = THIS_MODULE,
+ .of_match_table = s365_board_match,
+ },
+};
+
/*
* So at module init time we hog the regulator!
*/
-module_init(u300_init_boardpower);
+static int __init u300_init_boardpower(void)
+{
+ return platform_driver_probe(&s365_board_driver,
+ s365_board_probe);
+}
+
+device_initcall(u300_init_boardpower);
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
deleted file mode 100644
index 910698293d6..00000000000
--- a/arch/arm/mach-u300/spi.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/mach-u300/spi.c
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/spi/spi.h>
-#include <linux/amba/pl022.h>
-#include <linux/platform_data/dma-coh901318.h>
-#include <linux/err.h>
-
-/*
- * The following is for the actual devices on the SSP/SPI bus
- */
-#ifdef CONFIG_MACH_U300_SPIDUMMY
-static void select_dummy_chip(u32 chipselect)
-{
- pr_debug("CORE: %s called with CS=0x%x (%s)\n",
- __func__,
- chipselect,
- chipselect ? "unselect chip" : "select chip");
- /*
- * Here you would write the chip select value to the GPIO pins if
- * this was a real chip (but this is a loopback dummy).
- */
-}
-
-struct pl022_config_chip dummy_chip_info = {
- /* available POLLING_TRANSFER, INTERRUPT_TRANSFER, DMA_TRANSFER */
- .com_mode = DMA_TRANSFER,
- .iface = SSP_INTERFACE_MOTOROLA_SPI,
- /* We can only act as master but SSP_SLAVE is possible in theory */
- .hierarchy = SSP_MASTER,
- /* 0 = drive TX even as slave, 1 = do not drive TX as slave */
- .slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
- .ctrl_len = SSP_BITS_12,
- .wait_state = SSP_MWIRE_WAIT_ZERO,
- .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
- /*
- * This is where you insert a call to a function to enable CS
- * (usually GPIO) for a certain chip.
- */
- .cs_control = select_dummy_chip,
-};
-#endif
-
-static struct spi_board_info u300_spi_devices[] = {
-#ifdef CONFIG_MACH_U300_SPIDUMMY
- {
- /* A dummy chip used for loopback tests */
- .modalias = "spi-dummy",
- /* Really dummy, pass in additional chip config here */
- .platform_data = NULL,
- /* This defines how the controller shall handle the device */
- .controller_data = &dummy_chip_info,
- /* .irq - no external IRQ routed from this device */
- .max_speed_hz = 1000000,
- .bus_num = 0, /* Only one bus on this chip */
- .chip_select = 0,
- /* Means SPI_CS_HIGH, change if e.g low CS */
- .mode = SPI_MODE_1 | SPI_LOOP,
- },
-#endif
-};
-
-static struct pl022_ssp_controller ssp_platform_data = {
- /* If you have several SPI buses this varies, we have only bus 0 */
- .bus_id = 0,
- /*
- * On the APP CPU GPIO 4, 5 and 6 are connected as generic
- * chip selects for SPI. (Same on U330, U335 and U365.)
- * TODO: make sure the GPIO driver can select these properly
- * and do padmuxing accordingly too.
- */
- .num_chipselect = 3,
-#ifdef CONFIG_COH901318
- .enable_dma = 1,
- .dma_filter = coh901318_filter_id,
- .dma_rx_param = (void *) U300_DMA_SPI_RX,
- .dma_tx_param = (void *) U300_DMA_SPI_TX,
-#else
- .enable_dma = 0,
-#endif
-};
-
-
-void __init u300_spi_init(struct amba_device *adev)
-{
- adev->dev.platform_data = &ssp_platform_data;
-}
-
-void __init u300_spi_register_board_devices(void)
-{
- /* Register any SPI devices */
- spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
-}
diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h
deleted file mode 100644
index bd3d867e240..00000000000
--- a/arch/arm/mach-u300/spi.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-u300/spi.h
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#ifndef SPI_H
-#define SPI_H
-#include <linux/amba/bus.h>
-
-#ifdef CONFIG_SPI_PL022
-void __init u300_spi_init(struct amba_device *adev);
-void __init u300_spi_register_board_devices(void);
-#else
-/* Compile out SPI support if PL022 is not selected */
-static inline void __init u300_spi_init(struct amba_device *adev)
-{
-}
-static inline void __init u300_spi_register_board_devices(void)
-{
-}
-#endif
-
-#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index d9e73209c9b..390ae5feb1d 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -18,17 +18,15 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
/* Generic stuff */
#include <asm/sched_clock.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include "timer.h"
-
/*
* APP side special timer registers
* This timer contains four timers which can fire an interrupt each.
@@ -189,6 +187,8 @@
#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
+static void __iomem *u300_timer_base;
+
/*
* The u300_set_mode() function is always called first, if we
* have oneshot timer active, the oneshot scheduling function
@@ -201,28 +201,28 @@ static void u300_set_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_PERIODIC:
/* Disable interrupts on GPT1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 while we're reprogramming it. */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ u300_timer_base + U300_TIMER_APP_DGPT1);
/*
* Set the periodic mode to a certain number of ticks per
* jiffy.
*/
writel(TICKS_PER_JIFFY,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+ u300_timer_base + U300_TIMER_APP_GPT1TC);
/*
* Set continuous mode, so the timer keeps triggering
* interrupts.
*/
writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
/* Enable timer interrupts */
writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Then enable the OS timer again */
writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+ u300_timer_base + U300_TIMER_APP_EGPT1);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Just break; here? */
@@ -233,33 +233,33 @@ static void u300_set_mode(enum clock_event_mode mode,
*/
/* Disable interrupts on GPT1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 while we're reprogramming it. */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ u300_timer_base + U300_TIMER_APP_DGPT1);
/*
* Expire far in the future, u300_set_next_event() will be
* called soon...
*/
- writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+ writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
/* We run one shot per tick here! */
writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
/* Enable interrupts for this timer */
writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Enable timer */
writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+ u300_timer_base + U300_TIMER_APP_EGPT1);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
/* Disable interrupts on GP1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ u300_timer_base + U300_TIMER_APP_DGPT1);
break;
case CLOCK_EVT_MODE_RESUME:
/* Ignore this call */
@@ -281,27 +281,27 @@ static int u300_set_next_event(unsigned long cycles,
{
/* Disable interrupts on GPT1 */
writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Disable GP1 while we're reprogramming it. */
writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ u300_timer_base + U300_TIMER_APP_DGPT1);
/* Reset the General Purpose timer 1. */
writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+ u300_timer_base + U300_TIMER_APP_RGPT1);
/* IRQ in n * cycles */
- writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+ writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
/*
* We run one shot per tick here! (This is necessary to reconfigure,
* the timer will tilt if you don't!)
*/
writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
/* Enable timer interrupts */
writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
/* Then enable the OS timer again */
writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+ u300_timer_base + U300_TIMER_APP_EGPT1);
return 0;
}
@@ -320,8 +320,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_u300_1mhz;
/* ACK/Clear timer IRQ for the APP GPT1 Timer */
+
writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
+ u300_timer_base + U300_TIMER_APP_GPT1IA);
evt->event_handler(evt);
return IRQ_HANDLED;
}
@@ -342,65 +343,88 @@ static struct irqaction u300_timer_irq = {
static u32 notrace u300_read_sched_clock(void)
{
- return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+ return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
+}
+
+static unsigned long u300_read_current_timer(void)
+{
+ return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
}
+static struct delay_timer u300_delay_timer;
/*
* This sets up the system timers, clock source and clock event.
*/
-void __init u300_timer_init(void)
+static void __init u300_timer_init_of(struct device_node *np)
{
+ struct resource irq_res;
+ int irq;
struct clk *clk;
unsigned long rate;
+ u300_timer_base = of_iomap(np, 0);
+ if (!u300_timer_base)
+ panic("could not ioremap system timer\n");
+
+ /* Get the IRQ for the GP1 timer */
+ irq = of_irq_to_resource(np, 2, &irq_res);
+ if (irq <= 0)
+ panic("no IRQ for system timer\n");
+
+ pr_info("U300 GP1 timer @ base: %p, IRQ: %d\n", u300_timer_base, irq);
+
/* Clock the interrupt controller */
- clk = clk_get_sys("apptimer", NULL);
+ clk = of_clk_get(np, 0);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
setup_sched_clock(u300_read_sched_clock, 32, rate);
+ u300_delay_timer.read_current_timer = &u300_read_current_timer;
+ u300_delay_timer.freq = rate;
+ register_current_timer_delay(&u300_delay_timer);
+
/*
* Disable the "OS" and "DD" timers - these are designed for Symbian!
* Example usage in cnh1601578 cpu subsystem pd_timer_app.c
*/
writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
+ u300_timer_base + U300_TIMER_APP_CRC);
writel(U300_TIMER_APP_ROST_TIMER_RESET,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
+ u300_timer_base + U300_TIMER_APP_ROST);
writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
+ u300_timer_base + U300_TIMER_APP_DOST);
writel(U300_TIMER_APP_RDDT_TIMER_RESET,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
+ u300_timer_base + U300_TIMER_APP_RDDT);
writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
+ u300_timer_base + U300_TIMER_APP_DDDT);
/* Reset the General Purpose timer 1. */
writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+ u300_timer_base + U300_TIMER_APP_RGPT1);
/* Set up the IRQ handler */
- setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
+ setup_irq(irq, &u300_timer_irq);
/* Reset the General Purpose timer 2 */
writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
+ u300_timer_base + U300_TIMER_APP_RGPT2);
/* Set this timer to run around forever */
- writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
+ writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
/* Set continuous mode so it wraps around */
writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
+ u300_timer_base + U300_TIMER_APP_SGPT2M);
/* Disable timer interrupts */
writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
+ u300_timer_base + U300_TIMER_APP_GPT2IE);
/* Then enable the GP2 timer to use as a free running us counter */
writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
- U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
+ u300_timer_base + U300_TIMER_APP_EGPT2);
/* Use general purpose timer 2 as clock source */
- if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
+ if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
pr_err("timer: failed to initialize U300 clock source\n");
@@ -413,3 +437,6 @@ void __init u300_timer_init(void)
* used by hrtimers!
*/
}
+
+CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
+ u300_timer_init_of);
diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h
deleted file mode 100644
index d34287bc34f..00000000000
--- a/arch/arm/mach-u300/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-extern void u300_timer_init(void);
diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h
deleted file mode 100644
index 83f50772e16..00000000000
--- a/arch/arm/mach-u300/u300-gpio.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Individual pin assignments for the B335/S335.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 23:40:57 +0000