diff options
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 211 |
1 files changed, 197 insertions, 14 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 2a08c07dec6..bdd7b80dd7a 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -26,15 +26,18 @@ #include <linux/mfd/ab8500/gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> +#include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -47,6 +50,26 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct gpio_led snowball_led_array[] = { + { + .name = "user_led", + .default_trigger = "none", + .gpio = 142, + }, +}; + +static struct gpio_led_platform_data snowball_led_data = { + .leds = snowball_led_array, + .num_leds = ARRAY_SIZE(snowball_led_array), +}; + +static struct platform_device snowball_led_dev = { + .name = "leds-gpio", + .dev = { + .platform_data = &snowball_led_data, + }, +}; + static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_GPIO(0), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, @@ -69,6 +92,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +static struct gpio_keys_button snowball_key_array[] = { + { + .gpio = 32, + .type = EV_KEY, + .code = KEY_1, + .desc = "userpb", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 151, + .type = EV_KEY, + .code = KEY_2, + .desc = "extkb1", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 152, + .type = EV_KEY, + .code = KEY_3, + .desc = "extkb2", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 161, + .type = EV_KEY, + .code = KEY_4, + .desc = "extkb3", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 162, + .type = EV_KEY, + .code = KEY_5, + .desc = "extkb4", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data snowball_key_data = { + .buttons = snowball_key_array, + .nbuttons = ARRAY_SIZE(snowball_key_array), +}; + +static struct platform_device snowball_key_dev = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &snowball_key_data, + } +}; + +static struct smsc911x_platform_config snowball_sbnet_cfg = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .shift = 1, +}; + +static struct resource sbnet_res[] = { + { + .name = "smsc911x-memory", + .start = (0x5000 << 16), + .end = (0x5000 << 16) + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = NOMADIK_GPIO_TO_IRQ(140), + .end = NOMADIK_GPIO_TO_IRQ(140), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device snowball_sbnet_dev = { + .name = "smsc911x", + .num_resources = ARRAY_SIZE(sbnet_res), + .resource = sbnet_res, + .dev = { + .platform_data = &snowball_sbnet_cfg, + }, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, @@ -295,8 +409,9 @@ static void mop500_prox_deactivate(struct device *dev) } /* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { +static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -478,45 +593,104 @@ static void __init mop500_uart_init(void) db8500_add_uart2(&uart2_plat); } +static struct platform_device *snowball_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, + &snowball_sbnet_dev, + &ab8500_device, +}; + static void __init mop500_init_machine(void) { int i2c0_devs; + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + + u8500_init_devices(); + + mop500_pins_init(); + + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + mop500_i2c_init(); + mop500_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init snowball_init_machine(void) +{ + int i2c0_devs; + + u8500_init_devices(); + + snowball_pins_init(); + + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + + mop500_i2c_init(); + snowball_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init hrefv60_init_machine(void) +{ + int i2c0_devs; + /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller * instead. */ - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; u8500_init_devices(); - mop500_pins_init(); + hrefv60_pins_init(); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); - platform_device_register(&ab8500_device); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - if (machine_is_hrefv60()) - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ @@ -525,9 +699,18 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") MACHINE_END MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, - .init_machine = mop500_init_machine, + .init_machine = hrefv60_init_machine, +MACHINE_END + +MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") + .atag_offset = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .init_machine = snowball_init_machine, MACHINE_END |