diff options
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 208 |
1 files changed, 200 insertions, 8 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40493e..cd54abaccd9 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -26,24 +26,49 @@ #include <linux/mfd/ab8500/gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> +#include <linux/smsc911x.h> #include <linux/gpio_keys.h> +#include <linux/delay.h> +#include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> +#include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct gpio_led snowball_led_array[] = { + { + .name = "user_led", + .default_trigger = "none", + .gpio = 142, + }, +}; + +static struct gpio_led_platform_data snowball_led_data = { + .leds = snowball_led_array, + .num_leds = ARRAY_SIZE(snowball_led_array), +}; + +static struct platform_device snowball_led_dev = { + .name = "leds-gpio", + .dev = { + .platform_data = &snowball_led_data, + }, +}; + static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_GPIO(0), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, @@ -66,6 +91,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +static struct gpio_keys_button snowball_key_array[] = { + { + .gpio = 32, + .type = EV_KEY, + .code = KEY_1, + .desc = "userpb", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 151, + .type = EV_KEY, + .code = KEY_2, + .desc = "extkb1", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 152, + .type = EV_KEY, + .code = KEY_3, + .desc = "extkb2", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 161, + .type = EV_KEY, + .code = KEY_4, + .desc = "extkb3", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 162, + .type = EV_KEY, + .code = KEY_5, + .desc = "extkb4", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data snowball_key_data = { + .buttons = snowball_key_array, + .nbuttons = ARRAY_SIZE(snowball_key_array), +}; + +static struct platform_device snowball_key_dev = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &snowball_key_data, + } +}; + +static struct smsc911x_platform_config snowball_sbnet_cfg = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .shift = 1, +}; + +static struct resource sbnet_res[] = { + { + .name = "smsc911x-memory", + .start = (0x5000 << 16), + .end = (0x5000 << 16) + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = NOMADIK_GPIO_TO_IRQ(140), + .end = NOMADIK_GPIO_TO_IRQ(140), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device snowball_sbnet_dev = { + .name = "smsc911x", + .num_resources = ARRAY_SIZE(sbnet_res), + .resource = sbnet_res, + .dev = { + .platform_data = &snowball_sbnet_cfg, + }, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, @@ -292,8 +408,9 @@ static void mop500_prox_deactivate(struct device *dev) } /* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { +static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -393,12 +510,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif + +static pin_cfg_t mop500_pins_uart0[] = { + GPIO0_U0_CTSn | PIN_INPUT_PULLUP, + GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, + GPIO2_U0_RXD | PIN_INPUT_PULLUP, + GPIO3_U0_TXD | PIN_OUTPUT_HIGH, +}; + +#define PRCC_K_SOFTRST_SET 0x18 +#define PRCC_K_SOFTRST_CLEAR 0x1C +static void ux500_uart0_reset(void) +{ + void __iomem *prcc_rst_set, *prcc_rst_clr; + + prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_SET); + prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_CLEAR); + + /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ + writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); + udelay(1); + + /* Release soft reset PRCC_K_SOFTRST_SET */ + writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); + udelay(1); +} + +static void ux500_uart0_init(void) +{ + int ret; + + ret = nmk_config_pins(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_enable failed\n"); +} + +static void ux500_uart0_exit(void) +{ + int ret; + + ret = nmk_config_pins_sleep(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_disable failed\n"); +} + static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif + .init = ux500_uart0_init, + .exit = ux500_uart0_exit, + .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { @@ -424,6 +592,13 @@ static void __init mop500_uart_init(void) db8500_add_uart2(&uart2_plat); } +static struct platform_device *snowball_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, + &snowball_sbnet_dev, + &ab8500_device, +}; + static void __init mop500_init_machine(void) { int i2c0_devs; @@ -433,24 +608,29 @@ static void __init mop500_init_machine(void) * all these GPIO pins to the internal GPIO controller * instead. */ - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + if (!machine_is_snowball()) { + if (machine_is_hrefv60()) + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + else + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + } u8500_init_devices(); mop500_pins_init(); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + if (machine_is_snowball()) + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + else + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); - platform_device_register(&ab8500_device); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); if (machine_is_hrefv60()) i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; @@ -458,6 +638,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -477,3 +660,12 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .timer = &ux500_timer, .init_machine = mop500_init_machine, MACHINE_END + +MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .init_machine = mop500_init_machine, +MACHINE_END |